"Backup" does not save a Json file nor does one automatically create when I start up firefox (bookmarkbackups)

Hello,
I've successfully saved my bookmarks and browsing history in the past.
Transfering them from an old hard drive to a new hard drive.
I was trying "Backup" my bookmarks, but after choosing a location to "backup," firefox freezes for a few seconds but no json file is created.
Also, when I look up the "boomarkbackups" folder, the last saved file was sometime in June.
Can someone help me?
Thanks so much for your time and help.
Cheers,
KevinH

FredMcD,
Thanks so much for your help thus far!
Thanks for the addon I backed up using FEBE, But I don't see JSON files
Session store, places.sqlite,
Bookmars-2014-04-15_76972.json (for example)
Are they all actually backed up? I Performed a back up and all I got was the following:
(See image - and is this all normal, is it missing anything? Can this negate fixing places.sqlite?)
Cor-el,
Also, thank you for helping!
I turned off firefox and rebooted computer as instructed if the link you sent. Couldn't not back up and no auto backup.
Is there a danger of loosing my bookmarks using this (as described in the link you sent):
https://addons.mozilla.org/en-US/firefox/addon/places-maintenance/
The rebuild section in the post (Rebuild Places database)
warns of loosing your bookmarks. So should I try the following first? :
https://addons.mozilla.org/en-US/firefox/addon/places-maintenance/
Thanks both of you for your help and time. My bookmarks are like my library. They are very special to me.
Cheers,
Kevin H.

Similar Messages

How to Uninstall Yosemite? System does not allow Erase the HD, nor does it allow re-install of original O/S Disc (10.6.7). I want Mavericks or even Lion Back.   Thanks.

How to Uninstall Yosemite? System does not allow Erase the HD, nor does it allow re-install of original O/S Disc (10.6.7). I want Mavericks or even Lion Back.   Thanks.

Start with reinstalling Snow Leopard:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1 Access the App Store to download Mountain Lion or Yosemite. Mavericks is no longer available since the release of Yosemite. If you purchased Mountain Lion from the App Store, then you can redownload it via your Purchases page in App Store. If not, then you will need to purchase it from Apple;
Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.

I just updated my iTunes and I do not like the newer version.....can I go back to the earlier version?? This new version does not have the iTunes DJ nor does is show at the bottom as in the earlier version how many songs and the size of my library.

I just updated my iTunes on 12-7-2012 and I do not like the newer version.....can I go back to the earlier version?? This new version does not have the iTunes DJ nor does is show at the bottom as in the earlier version how many songs and the size of my library.

To do this in iMovie 11. use the SHARE menu. Share your project using the Share menu and choose Export Using QuickTime.
In the Dialog box that comes up, choose Sound to AIFF, or one of the other sound options. This will create a file that you can drag into iTubes.

Help! I used to be able to sync my iphone as soon as I plugged it in, but now the sync does not show on the menu nor does photos. How do I get these back?

Help! I used to be able to sync my iphone as soon as I plugged it in. Now sync does not appear in the menu nor does photos. How do I get these opti
ons back??

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
-Griff W.

Why BRBACKUP cmd does not save SAP control files?

Hello!
    We experience some issues running BRBACKUP utility to save SAP's data objects.
When we run the BRBACKUP cmd, we see that all tablespaces and configurations files
are save, but BRBACKUP cmd does not save control files. Why, we don't know?
BRBACKUP run throught AIX crontab and it looks like this ...
brbackup -u system/disapinst01 -c -m full -t online
the init<SID>.ora file looks good, we can see that the *.control_files entry is OK.
*.control_files='/oracle/<SID>/origlogA/cntrl/cntrlDDI.dbf',
                '/oracle/<SID>/origlogB/cntrl/cntrlDDI.dbf',
                '/oracle/<SID>/sapdata1/cntrl/cntrlDDI.dbf'
SAP's ENVIRONMENT
- HW: IBM pSeries Server (JS21) BladeCenter 8677-3RV
- SW: Plataform IBM AIX V5.3.0.0 ML 5300-05
- DB: Oracle 10g
Somebody help us, please!

brbackup copies one controlfile to /oracle/PRD/sapbackup and then backs up this copy.
look for a similar message in your log:
BR0319I Control file copy created: /oracle/PRD/sapbackup/CNTRLPRD.DBF 28680192
BR0077I Database file for backup: /oracle/PRD/sapbackup/CNTRLPRD.DBF

Image Capture does not save a scanned file

Image Capture using an HP Photosmart C3180 to scan a document does so but does not save the file to the Desktop.
A pop-up windows displays Scan Results but still not file
O/S Lion, Image Capture Version 6.1 (440).
Used to work, what is the deal?

As for the scanner - so is this new one wireless? When I hooked up my Epson All-in-One, I had to install it via USB first before I could install the wireless (per their instructions). With Snow Leopard, I simply installed the driver and it covered and recognized both the print and scan function - not so in Lion; I had to go through hoops with the scanner part and it finally showed up as a separate unit. I thought that is silly, but - as long as it works..... I'm trying to think of possibilities since I'm about out of ideas, so you might want to consider that (if it applies). The other troubleshooting suggestions usually include redoing the "add" function after a reboot.
As for Image Capture, I am out of ideas. FWIW, I never use it - in my workflow, there is no need for it. Not sure if this would have an impact, but make sure that you choose Image Capture in the CDs&DVDs Preference Pane (mine is set to ignore or ask purposely):
If that does not work, I'd suggest reinstalling the OS over the top of what you have.

InDesign does not save - generates new file

While working with a 6 person workgroup, using InDesign and InCopy across a network.
I am in InDesign CS 6 on a Mac, the rest of the team in InCopy CS 6 on PC's.
The problem I am encountering is intermittent and happens when the group is very active, crunching on a tight pub deadline.
Some times I am able to save the InDesign file properly, it saves over the latest version in the proper place without prompting.
At other times it does not allow me to save properly and forces a "Save As" scenario, which of course wreaks havoc with the links.
We are working over a network that also creates scenarios where a file in PowerPoint sometimes pops up inadvertently and intermittently as "read only"
I can only describe this as a kind of intermittent "lag" in the network.
Any thoughts?

A save as, over the current file should not cause any problems at all
and in fact is pretty good practice.
If you can't save over it, are you getting an error message?
Bob

My ipad just says connect to itunes but when I connect to itunes it does not show up in itunes nor does it start.... please help!!!!!!!

Hello,
I have a ipad 1 with me which is saying connect to itunes but when I connect to my laptop for itunes, ipad does not show up on itunes and ipad does not start also....
Abhishek

Try recovery mode now.
iOS: Unable to update or restore - Apple - Support

HT4527 the new computer does not see the media library, nor does it recognize my playlists and settings.

The new computer is authorized and if I go to the medial library and double click on a song it launches, however itunes does not see my tunes or show my playlists

Follow the steps given here
https://discussions.apple.com/docs/DOC-3141

My PC W7 does not recognise my iPhone 4S nor does the latest version of iTunes

When I connect the iPhone to the PC the PC makes a sound as though it recognises something being connected to the PC however even Windows does not show the iPhone as connected.

try resetting the apple mobile device support
-http://support.apple.com/kb/TS1567
if this doesnt work ou may have to put it into recovery mode
-hold home and power button till apple logo comes up or for like 1 min or put into recovery mode hold home button down while plugging it into the computer till iTunes logo comes up
if that does not work either you may want to uninstall itunes and reinstall it
-http://support.apple.com/kb/HT1923?viewlocale=en_US

3D in photoshop cc does not work, the program will be cut off automatically

3D in photoshop cc does not work, the program will be cut off automatically.What can I do?

my problem is as follows.If I want to make a 3d creation in photoshop, then
asked me to cc in clicking function 3D, after new JUST by layer and then
JUST PRESET and then sphere. Then opens a new window where in it says: you
are about to make a 3d layer.Do you want to switch on the 3d workspace? I
choose YES Then I get to see a new window stating that the program no
longer work properly and quits. Am I doing something wrong or is my pc not
suitable? data from my laptop are: processor a4-5000 AMD APU with radion
(tm) HD graphics 64-bit operating system, hr 4.00 1.50 Gb x64processor
honor!
mijn probleem is als volgt.Als ik een 3d creatie wil maken in photoshop cc,
dan wordt mij gevraagt om in functie 3D aan te klikken, daarna NIEUW NET
VAN LAAG en dan VOORINSTELLING VOOR NET en dan BOL.
Dan opend zich een nieuw venster waar in staat:u staat op het punt een 3d
laag te maken.Wilt u overschakelen op de 3d werkruimte?
Ik kies dan voor JA
Vervolgens krijg ik een nieuw venster te zien waarin staat dat het
programma niet goed meer werkt en wordt afgesloten.
Doe ik iets verkeerd of is mijn pc niet geschikt?
gegevens van mijn laptop zijn :
processor AMD a4-5000 APU with radion(tm) HD graphics 1.50 hr
4.00 Gb
64 bits besturingsysteem, x64processor
2014-12-18 10:14 GMT+01:00 c.pfaffenbichler <[email protected]>:
3D in photoshop cc does not work, the program will be cut off
automatically created by c.pfaffenbichler
<https://forums.adobe.com/people/c.pfaffenbichler> in *Photoshop General
Discussion* - View the full discussion
<https://forums.adobe.com/message/7025920#7025920>

Yesterday I updated my mac software and now my ilustrator cs6 does not save files nor open old ones

I was working just fine with my desktop imac and it said there were som software updates available so I click on it.
Now my ilustrator Cs6 does not save files nor open them, the finder is behaving strangely or crushing...somebody asked me if I have downloades a font recently, yes I have.im in the middle of an important job and dont know wht to do

Moving this discussion to the Illustrator forum.

Recording does not save the file

We are facing a serious problem with Captivate 2. After
recording about 40 -50 slides it does not save the file.
The system hangs for several minutes and there’s no
response.To analyze this problem we have tried out User Forums and
FAQs.In the User Forum too similar problems are reported. For
example, visit:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=464&threadid =1261116&enterthread=y
In fact, in our team Captivate is loaded on a standalone
hi-end system with ample space and memory.
We have also tried workarounds to address this issue. For
example, we deleted all temp files from library and we also saved
it on a short path like c:/project.
Nothing works!!!

Hi Madduser and welcome to our community
When you say
To analyze this problem we have tried out User Forums and
FAQs are we to assume you simply searched them and read the
threads? I'm assuming this because this is your first post here.
You will note that the thread you linked to mentioned the
person was attempting to save on a network. I do see you have tried
using the shortened local path to no avail, so I'm guessing the
network is ruled out here.
As usual, I've got more questions than answers, but hopefully
as we work through them something will come to light.
* Have you EVER been able to create and save things using
Captivate? Or did you just install it and it's never worked for
you?
* Have you tried what is outlined in the following Technical
Note?
Click here to read the
Technical Note
Cheers... Rick

I am trying to save a large file on Illustrator CS6 and it does not save and instead says "Unknown Error Occurred." What do I do?

I am trying to save a large file on Illustrator CS6 and it does not save and instead says "Unknown Error Occurred." What do I do?
The file has 4 artboards with webpage designs. I tried to take two of the artboards, create a separate doc with those two, and save, but the result was the same.
However, I am able to save simpler, smaller files.
I need to not lose these files and I am afraid to quit and restart and lose my unfinished work.
Any advice?

What happens if you choose this option?

Compression does not save space

Hello All,
OS: AIX 5.2.
We are creating seven backup files every day.
We transfer files to our backup server via ftp.
No we have request to compress files.
So I create a backup folder and put all seven files into one pax folder as below:
pax -wvf backup.pax file1 file2 file3 file4 file5 file6 file7
ls
backup.pax Now I am trying to compress file as below but getting error:
oracle:>compress backup.pax
This file is not changed; compression does not save space.
DN

it's pretty universally accepted.The keyword is "universally". Bzip2 has better compression but it's very slow. This is the reason why bzip2 can't be universally accepted (I mean online content compression via HTTP etc. etc.).
But it's accepted by most of *nix clones. And if I need really save ma space then I use bzip2 rather than gzip.
Just little proof:
standard_bz2.log and standard_gz.log files are the same.
du -sh *
1.1G    standard_bz2.log
1.1G    standard_gz.lognow I'll execute following commands:
echo "GZIP"; date; gzip standard_gz.log; date
echo "BZIP2"; date; bzip2 standard_bz2.log dateand here is output:
GZIP
Mon Jun 12 12:26:38 CEST 2006
Mon Jun 12 12:27:38 CEST 2006
BZIP2
Mon Jun 12 12:27:45 CEST 2006
Mon Jun 12 13:12:29 CEST 2006
du -sh *
54M     standard_bz2.log.bz2
108M    standard_gz.log.gzGzip's compresion was fast (took just 60 seconds) and produced archive has 108M Size.
Bzip2's compression was much better and produced size of archive was just 54M but it took much time for compression.
So if you need quick compression and less of saved capacity then gzip is the right option.
If you need save space or you need better compression then bzip2 is the right option.

"Backup" does not save a Json file nor does one automatically create when I start up firefox (bookmarkbackups)

Similar Messages

Maybe you are looking for