Backup domain ?

This may be posted under iweb 09 but it shouldn't matter. Where do I find my web domain. I have had problems finding the actual domain with spotlight. What I wan to do is copy it and save it in a backup file.
I think time machine may do this and perhaps my idisk but I want to keep one on a seperate drive and dvd in case something happens to the original.
This web site took way too long to build.

Spotlight does a terrible job as it is restricted to areas that Apple deems the only areas you should be looking. Use Find File as it looks everywhere on the HD.
The default location for the domain file is in your User/Library/Application Support/iWeb folder. Yes, TM will backup your user library and your domain file. I also make a separate backup whenever I've edited and saved any changes. I've created an Automator workflow that copies the iWeb folder to the Documents folder. You can download that from Toad's Cellar. You can edit the workflow to change the destination of the backup copy. Just drag the workflow onto the Automator icon to open it. The rest is self explanatory.
OT

Similar Messages

Problematic issues in installing backup domain controller on Virtual Machine

Hello,<o:p></o:p>
I have a physical domain controller - windows Server 2012 R2 Standard installed
in my domain environment and this is a first root domain controller.
I have also Hyper-V Server 2012 R2 installed and joined in that domain.
Now I want to install an additional (Backup) domain controller as a virtual
machine hosted on Hyper-V Server. So while promoting VM as a DC all actions and
steps go well but the problem arise when I press the install button at the end
of the promotion - installation gets stuck in the process of writing some
configuration files on first DC and also in the process of replication. Unfortunately
VM does not promote as a DC and it goes to restart.
The error event log with - NETLOGON source is logged on the virtual machine as
well.
Do you have some suggestions with this issue, or experience how to resolve this..
Thanks a lot in advance,
GMG
<o:p></o:p>

Now I want to install an additional (Backup) domain controller
There is no backup DC. All DCs are RW except RODCs.
I would recommend first checking the health status of the existing DC using
dcdiag command. Also, please check the IP settings in use: Please make sure that the existing DC has its primary IP address in use and that public DNS servers are set as forwarders and not in IP settings of the DC. For the new DC, please make sure
that it points to the existing DC as primary DNS server and once promoted you can see the recommendations here to update the configuration: http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
Please also disable temporary all security software in use on the DCs and make sure that needed ports for AD replication and authentication are not blocked or filtered between the DCs.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Backup domain file

I took a backup of a domain using this command:
%asadmin> backup-domain domaindir /var/opt/SUNWappserver/domains verbose=true domain1
successfully found a sjsas*V0001.zip file in installdir/domains/domain2/backup folder.
When I tried to open it to check for the files in from local system and see an error:
Cannot open file; it doesnot appear to be a valid archive..
Can anybody tell me what this error mean?
When I viewed the error output from WinZip, this is what I get:
End-of-central-directory signature not found. Either this file is not a Zip file, or it constitutes one disk of a multi-part Zip file.

asadmin> backup-domain domaindir /var/opt/SUNWappserver/domains verbose=true domain1
May 17, 2007 4:13:20 PM com.sun.enterprise.config.backup.LoggerHelper finest
FINEST: Request DUMP **********
Class Modifiers Field Value
BackupRequest static final excludeDirs [Ljava.lang.String;@15093f1
BackupRequest (package) domainsDir /var/opt/SUNWappserver/domains
BackupRequest (package) domainName domain1
BackupRequest (package) description 1179432800024
BackupRequest (package) backupFile /var/opt/SUNWappserver/domains/domain1/backups/sjsas_backup_v00001.zip
BackupRequest (package) domainDir /var/opt/SUNWappserver/domains/domain1
BackupRequest (package) timestamp 1179432800024
BackupRequest (package) backupDir <null>
BackupRequest (package) terse false
BackupRequest (package) verbose true
May 17, 2007 4:13:20 PM com.sun.enterprise.config.backup.LoggerHelper fine
FINE: Writing /var/opt/SUNWappserver/domains/domain1/backups/sjsas_backup_v00001.zip
com.sun.enterprise.config.backup.BackupException: Error writing Zip file: /var/opt/SUNWappserver/domains/domain1/backups/sjsas_backup_v00001.zip

STMS Backup Domain Controller.

Hi,
I want to configure a backup domain controller in my SAP system. The current controller is on my Production (PRD). I would like to configure the backup controller on Development (DEV).
Currently, my OS is on AIX. The NFS is at Production for /usr/sap/trans.
My question is, if I have a hardware problem in PRD that also impact my NFS, the backup controller that was created would also be pointless? Please correct me if I am wrong.
Hope to get feedback.
Thanks in advance,
IAzir.

Hi,
I know individual /usr/sap/trans can be implemented in Windows but not in UNIX.
Unix uses NFS. I might be wrong. Have your tried it before?

2012 Essentials and Backup Domain Controllers

I understand that 2012 Essentials wants to be the domain controller but what happens if I install a second one on the same network/what is the option for a backup domain controller? Is it recommended to have one 2012E and one 2012S?

As far as I can find you can have a second "replica" domain controller, but you can only have one essentials box in the domain (so the replica would just be Windows Server standard), and that must be the master server, eg it must own the FSMO roles.
Check out
http://blogs.technet.com/b/sbs/archive/2007/10/04/debunking-the-myth-about-additional-domain-controllers-replica-dcs-in-an-sbs-domain.aspx which covers many of the limitations and requirements. It doesn't relate to 2012, but I believe the same rules still
apply.

Can't make a Backup Domain Controller

I have one Open Directory Master and three replicas. The Master is also set to be the Windows Primary Domain Controller. But none of the replicas can join the domain or join as the Backup Domain Controller.
When I search the logs on the Master, I see:
could not find new user/computer luca$ in passdb
luca (a replica) is in Workgroup Manager. I even added a Kerberos entry for it.
Any help is greatly appreciated.

Solved my own problem...
Turns out that some users on the network took it upon themselves to join a Workgroup with the same name as our Domain. Samba doesn't seem to like that at all. So make sure your workgroup names are never the same as your domain names.

Using the backup domain file

Hello - I build a website on IWEB 08 and did a backup of the domain file into an external hardrive.
The method I used to create this backup file was by selecting "duplicate" option on the view finder.
I changed the name of the file to be "domain_date" and installed it on my external hardrive.
Now I have a new computer with IWEB 09 and I am not able to open the backup domain file in this computer. I read somewhere today, that we can't change the name of the domain file, so I changed my backup file back to just "domain".
I have tried different things but nothing works.
Thank you!

What happens when you try to open the backup domain file? Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
2 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
3 - reboot.
4 - launch iWeb and see if the domain file will open.
If that doesn't help continue:
5 - move the domain file from your User/Library/Application Support/iWeb folder to the Desktop.
6 - launch iWeb, create a new test site and save.
7 - go to the your User/Library/Application Support/iWeb folder and delete the new domain file.
8 - move your original domain file from the Desktop to the iWeb folder.
9 - launch iWeb and try again.
OT

JCIFS NTLM - giving backup domain controller in web.xml

Hi All,
We are using JCIFS NTLM authentication, for which we've configured the filter in web.xml like this
... other code ...
<filter>
    <filter-name>NtlmHttpFilter</filter-name>
    <filter-class>jcifs.http.NtlmHttpFilter</filter-class>
    <init-param>
        <param-name>jcifs.http.domainController</param-name>
        <param-value>SERVER1</param-value>
    </init-param>
    ..... other code .....the above code specifies a single domain controller SERVER1 for the NTLM authentication. Suppose, I want to give one more server also (i.e. when the SERVER1 down, NTLM should check my backup server SERVER2), how do I give it in the above code? Is it like <param-value>SERVER1, SERVER 2</param-value> ?
Thanks in advance.

I am facing the same exact problem.
<filter>
          <filter-name>NtlmHttpFilter</filter-name>
          <filter-class>jcifs.http.NtlmHttpFilter</filter-class>
          <init-param>
               <param-name>jcifs.http.domainController</param-name>
               <param-value>corg0dc02</param-value>
          </init-param>
</filter>
    <filter-mapping>
         <filter-name>NtlmHttpFilter</filter-name>
         <url-pattern>/*</url-pattern>
    </filter-mapping>
   Is it possible to use EL or equivalent instead of hard-coding the param-value? Is this allowed in the Servlet spec?
I would like to read the param-value from a properties file or DB table if possible.
Edited by: asookazian on May 21, 2009 10:34 PM

Os 10.5.6 OD replica will not create SMB backup domain controller

Hi,
Apologies if this is a redundant posting. I have two xserves both w/ os 10.5.6. One is the OD master and SMB PDC. The other is an OD replica w/ SMB turned on as a standalone server. I'd like to promote this to the BDC, but trying to do so w/ server admin fails consistently.
OD replication works fine, and I've confirmed the diradmin account's information is correct. Is there anything that I'm failing to take into account?
here's is one log entry that looks suspect:
"Loadlmhostsfile: Can't open lmhosts file /private/etc/lmhosts. Error was No such file or directory"
I can provide smb.conf and other logs if anyone wants, but the config is pretty much all defaults. Thanks for any advice.
-SB

This is typically an issue with OD Master. You typically have to demote the PDC to stand alone and then bring the OD Master to stand alone as well and start the process over. Instead of that there is a command you can try, although I haven't and see how it works.
sudo mkpassdb -kerberize
Before doing that make sure hostname and sudo changeip -checkhostname all return good things. Don not forget this as well:
scutil --get HostName
dscl /LDAPv3/127.0.0.1 -read /Config/KerberosKDC > KerberosKDC.out; cat KerberosKDC.out
In either even always make sure you have a good backup of the server and ODM before doing anything.

Reloading iWeb Domain from Backup Domain - Not working

My iMac hardrive crashed and died. We re-installed a new drive. We reloaded the old website back into the Applications Support folder for iWeb. But, every time we re-boot the iWeb keeps starting up with a new page. We then double click on the original icon and every thing is fine until we reboot again and again iWeb keeps defaulting to a new page and when we reload the original website all the newly added changes are no longer there and we have to start all over again.
Is there a fix to this?
JKai

Yes, it is the original iWeb site we built from within iWeb. Here is another problem that is occurring. When you open the website from Safari the new changes are there. But when you reboot the computer the iWeb site reverts back to the older version where the changes we just made is no longer there.. but in Safari the NEW changes are there. Somehow the iWeb site we are working on keeps reverting back.
I will make the changes again but this time I will be sure to copy the iWeb site from the "Applications Support" folder and replace it with the version iWeb keeps reverting to - to see if that will work.
I will post my results some time today when I have time. Thank you and hope stay in touch to help me with the results.

Domains Juggler, Domain Backup.

For those use Domains Juggler: I updated Domains Juggler, why? you ask.
Because some people still use it, and it allows a bit simpler way to create new Domain.sites.
http://hac.i4host.net/ --> iWeb.html
For those use Domain Backup: Domain Backup ONLY copies ~/Library/Application Support/iWeb/Domain.sites.
Domain Backup will not work properly if you start iWeb by double click other Domain.sites outside of ~/Library/Application Support/iWeb/
I'm looking at the solution on how to back up multiple Domain.sites. All inputs are welcome.

Try this and send an email.
http://www.geocities.com/[email protected]/Home.html
OR
try iWebSites
http://mistergregg.com/cocoadrillosoftware/

Problem Connecting a Windows Computer to Our Domain

I'm trying to connect a windows XP pro computer to a domain. There is an OD replica on the same subnet set as a Backup Domain Controller. The OD master is on a different subnet, it is set as a Primary Domain Controller.
The error I'm getting is:
The following error occurred attempting to join the domain "DN":
The Specified domain either does not exist or could not be contacted.
If I turn the backup domain controller off the error pops up as soon as I try to join the domain. If the backup domain controller is running a login prompt pops up I enter the username and password and the error pops up after about 15 seconds.
I've attempted to verify settings using: http://www.shellharbourd.det.nsw.edu.au/pdf/osxserver/080_win_osxdmn.pdf and everything looks correct.

The Apple store will do this for you.
You can call Apple support and they will help you do it.
You can type "move itunes library from pc to mac" into the google search bar.

Error While creating Domain offline in windows...

I am trying to create a domain in windows using my scripts which i use in unix. But i am getting the following error. Here i am using Ant /build.xml/ and domain.properties( in this i pass the details) Please help....
C:\scripts>setenv
C:\scripts>set WEBLOGIC_HOME=C:\bea\wlserver_10.3
C:\scripts>set BEA_HOME=C:\bea
C:\scripts>set WORK_DIR=C:\wldomains
C:\scripts>set DOMAIN_HOME=C:\wldomains
C:\scripts>call "C:\bea\wlserver_10.3\server\bin\setWLSEnv.cmd"
CLASSPATH=C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_
patch.jar;C:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_p
atch.jar;C:\bea\JROCKI~1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.
jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.s
erver.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\m
odules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.ja
r;.;C:\Program Files\QuickTime\QTSystem\QTJava.zip
PATH=C:\bea\patch_wls1030\profiles\default\native;C:\bea\patch_cie660\profiles\d
efault\native;C:\bea\WLSERV~1.3\server\native\win\32;C:\bea\WLSERV~1.3\server\bi
n;C:\bea\modules\ORGAPA~1.5\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\o
racle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Syst
em32\Wbem;C:\Program Files\Windows Imaging\;C:\Program Files\Perforce;C:\Program
Files\QuickTime\QTSystem;c:\ant\bin;C:\bea\WLSERV~1.3\server\native\win\32\oci9
20_8
Your environment has been set.
C:\scripts>ant clean
Buildfile: build.xml
identify-os:
init:
clean:
[delete] Deleting directory C:\scripts\build
BUILD SUCCESSFUL
Total time: 1 second
C:\scripts>ant setup-domain
Buildfile: build.xml
identify-os:
init:
[mkdir] Created dir: C:\scripts\build
init-domain-env:
setup-domain:
identify-os:
init:
init-domain-env:
config-domain:
identify-os:
init:
init-domain-env:
backup-domain:
identify-os:
init:
init-domain-env:
delete-domain:
[echo] Deleting domain 'C:\wldomains\pdc2' ...
[echo] Configuring WebLogic 10.3 domain (offline mode) ...
identify-os:
init:
run-wlst-script:
[echo] Running WLST script 'C:\scripts\wlst\offline\config-domain.py' ...
[java] Initializing WebLogic Scripting Tool (WLST) ...
[java] Welcome to WebLogic Server Administration Scripting Shell
[java] Type help() for help on available commands
[java] Loading configuration properties ...
[java] [I] Reading the domain template ...
[java] [I] Configuring the domain ...
[java] [I] Configuring domain 'pdc2' ...
[java] [I] Creating log mbean for 'Domain' : 'pdc2' ...
[java] [I] Configuring the admin user ...
[java] [I] Configuring admin user 'system' ...
[java] [I] Configuring the admin server ...
[java] [I] Configuring admin server 'myserver' ...
[java] [I] Renaming server 'AdminServer' to 'myserver' ...
[java] [I] Updating server 'myserver' ...
[java] [I] Creating log mbean for 'Server' : 'myserver' ...
[java] [I] Creating SSL for server 'myserver' ...
[java] [I] Creating WebServer for server 'myserver' ...
[java] [I] Creating WebServerLog mbean for 'WebServer' : 'myserver' ...
[java] [I] Configuring machines ...
[java] [I] Configuring clusters ...
[java] [I] Configuring servers ...
[java] [I] Configuring servers 'myserver' ...
[java] [I] Configuring server 'myserver' ...
[java] [I] Updating server 'myserver' ...
[java] [I] Updating log mbean for 'Server' : 'myserver' ...
[java] [I] Updating SSL for server 'myserver' ...
[java] Error: setListenPort() failed. Do dumpStack() to see details.
[java] [I] Updating WebServer for server 'myserver' ...
[java] [I] Updating WebServerLog mbean for 'WebServer' : 'myserver' ...
[java] [I] Configuring startup classes ...
[java] [I] Configuring shutdown classes ...
[java] [I] Configuring mail sessions ...
[java] [I] Setting domain options ...
[java] [I] Setting overwrite domain to 'true'
[java] [I] Setting create start menu to 'false'
[java] [I] Setting java home to 'C:/beajdk160_05'
[java] [I] Setting server start mode to 'dev'
[java] [I] Saving the domain configuration ...
[java] Error: writeDomain() failed. Do dumpStack() to see details.
[java] [I] Closing the domain template ...
[java] [I] Reading the domain configuration ...
[java] Error: readDomain() failed. Do dumpStack() to see details.
[java] [I] Configuring JDBC ...
[java] [I] Configuring JDBC system resources 'CPoolDS,EPoolDS,poswotDataSou
rce,MainTxDataSource,AdditionalTxDataSource,PDC1PoolDS,urgentMessageDataStore,Us
rFriendlyDescPoolDS' ...
[java] [I] Configuring JDBC system resource 'CPoolDS' ...
[java] Error: No domain or domain template has been read.
[java] Problem invoking WLST - Traceback (innermost last):
[java] File "C:\scripts\wlst\offline\config-domain.py", line 149, in ?
[java] File "C:\scripts\Lib\script\offline\jdbc.py", line 35, in configJD
BCSystemResources
[java] File "C:\scripts\Lib\script\offline\jdbc.py", line 51, in configJD
BCSystemResource
[java] File "C:\scripts\Lib\script\offline\jdbc.py", line 97, in hasJDBCS
ystemResource
[java] File "C:\scripts\Lib\script\common\wlstutils.py", line 99, in chec
kPath
[java] TypeError: string member test needs char left operand
BUILD FAILED
C:\scripts\build.xml:20: The following error occurred while executing this line:
C:\scripts\build.xml:431: The following error occurred while executing this line
C:\scripts\build.xml:743: Java returned: 1
Total time: 10 seconds

Hai,
After doing snapshot my application was created and even in fdm also i found error while creating application(hint:cache not found) but now everything is fine don't know what exactly the error may be but now i am facing 404 error while doing Assign Access control in shared services console what may be the reason did anyone experienced this error if so please provide me the solution.
Edited by: 940022 on Jun 15, 2012 3:50 AM
Edited by: 940022 on Jun 15, 2012 3:51 AM

Time server in a domain

i just set my pdc emulator on a 2012 r2 domain to get time from the ntp.org time servers
looks to be working, when i do a w32tm /query /status i get the source either 1, 2, or 3.north-america.pool.ntp.org,0x8
Likewise when i do it on my "backup" domain controller (no roles on this one) i get the source as the PDCe above.
My domain contollers are fine. My member servers, which i thought by default would synch with the DC that it authenticates with, i get all sorts of sources.
One has source:CMOS clock, another source:time.windows.com,0x1
Should I be configuring the time settings for my member servers as well? If so, GPO would be the preferred way if anyone has tips....thank you.

Any machines joined to the domain should synchronize their time with the server holding the PDC role, no further configuration is required. Are these member servers on the same subnet as the PDC role holder? If not then perhaps the connection is being
blocked by a firewall somewhere. Are there any errors in the event logs of the member server relating to the time service that might have logged a fault in the event viewer.

Allow Users to RDP to Domain Contoller

Let me start this with, I have read every article and forum post I can find about this issue. I know that it should be as easy as granting a permsission to the user/groups.
I have 2 domain contollers (both running Server 2008 Standard), both of them are going to need to be logged in by users other than the Domain Administrators group. I have added the group that the users are in (Developers) to the following GPO.
Default Domain Contollers Policy -> Computer Configuration -> Policies -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignement -> Allow log on through Remote Desktop Services and Allow log on locally.
I have verified that these settings are being applied to the DCs by running RSOP.MSC on the two controllers and I can see that the settings that I change to the GPO are being reflected in the RSOP.MSC results.
When a user, other than a Domain Admin, tries to log in, they get the error "The connection was denied because the user account is not authorized for remote login."
Is there any other location/setting that I am missing on the GPO or perhaps the server it self that would be related to why this is not working.
Any help would be greatly appreciated.
Thank you,
Alex

Here is the output of the gpresult:
Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 2/20/2012 at 12:50:33 PM
RSOP data for INTERNAL\aderr on TUWINAD02 : Logging Mode
OS Configuration:            Additional/Backup Domain Controller
OS Version:                  6.1.7601
Site Name:                   TucsonDR
Roaming Profile:             N/A
Local Profile:               C:\Users\aderr
Connected over a slow link?: No
COMPUTER SETTINGS
    CN=TUWINAD02,OU=Domain Controllers,DC=internal,DC=az,DC=gov
    Last time Group Policy was applied: 2/20/2012 at 12:45:56 PM
    Group Policy was applied from:      TUWINAD02.internal.az.gov
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        INTERNAL
    Domain Type:                        Windows 2000
    Applied Group Policy Objects
        Default Domain Controllers Policy
        Default Domain Policy
    The following GPOs were not applied because they were filtered out
        Local Group Policy
            Filtering: Not Applied (Empty)
    The computer is a part of the following security groups
        BUILTIN\Administrators
        Everyone
        BUILTIN\Pre-Windows 2000 Compatible Access
        BUILTIN\Users
        NT AUTHORITY\NETWORK
        NT AUTHORITY\Authenticated Users
        This Organization
        TUWINAD02$
        Read-only Domain Controllers
        Domain Controllers
        Enterprise Read-only Domain Controllers
        Denied RODC Password Replication Group
        System Mandatory Level
    Resultant Set Of Policies for Computer
        Software Installations
            N/A
        Startup Scripts
            N/A
        Shutdown Scripts
            N/A
        Account Policies
            GPO: Default Domain Policy
                Policy:            MaxRenewAge
                Computer Setting: 7
            GPO: Default Domain Policy
                Policy:            MaxServiceAge
                Computer Setting: 600
            GPO: Default Domain Policy
                Policy:            MaxClockSkew
                Computer Setting: 5
            GPO: Default Domain Policy
                Policy:            MaxTicketAge
                Computer Setting: 10
        Audit Policy
            N/A
        User Rights
            GPO: Default Domain Controllers Policy
                Policy:            MachineAccountPrivilege
                Computer Setting: Authenticated Users
            GPO: Default Domain Controllers Policy
                Policy:            ChangeNotifyPrivilege
                Computer Setting: Everyone
                                   LOCAL SERVICE
                                   NETWORK SERVICE
                                   Administrators
                                   Authenticated Users
                                   Pre-Windows 2000 Compatible Access
            GPO: Default Domain Controllers Policy
                Policy:            IncreaseBasePriorityPrivilege
                Computer Setting: Administrators
            GPO: Default Domain Controllers Policy
                Policy:            TakeOwnershipPrivilege
                Computer Setting: Administrators
            GPO: Default Domain Controllers Policy
                Policy:            RestorePrivilege
                Computer Setting: Administrators
                                   Backup Operators
                                   Server Operators
            GPO: Default Domain Controllers Policy
                Policy:            DebugPrivilege
                Computer Setting: Administrators
            GPO: Default Domain Controllers Policy
                Policy:            SystemTimePrivilege
                Computer Setting: LOCAL SERVICE
                                   Administrators
                                   Server Operators
            GPO: Default Domain Controllers Policy
                Policy:            SecurityPrivilege
                Computer Setting: Administrators
            GPO: Default Domain Controllers Policy
                Policy:            ShutdownPrivilege
                Computer Setting: Administrators
                                   Backup Operators
                                   Server Operators
                                   Print Operators
            GPO: Default Domain Controllers Policy
                Policy:            AuditPrivilege
                Computer Setting: LOCAL SERVICE
                                   NETWORK SERVICE
            GPO: Default Domain Controllers Policy
                Policy:            InteractiveLogonRight
                Computer Setting: Account Operators
                                   Administrators
                                   Backup Operators
                                   INTERNAL\dclemmer
                                   INTERNAL\Developers
                                   INTERNAL\SysAdmins
                                   Print Operators
                                   Server Operators
            GPO: Default Domain Controllers Policy
                Policy:            CreatePagefilePrivilege
                Computer Setting: Administrators
            GPO: Default Domain Controllers Policy
                Policy:            BatchLogonRight
                Computer Setting: Administrators
                                   Backup Operators
                                   Performance Log Users
            GPO: Default Domain Controllers Policy
                Policy:            NetworkLogonRight
                Computer Setting: Everyone
                                   Administrators
                                   Authenticated Users
                                   ENTERPRISE DOMAIN CONTROLLERS
                                   Pre-Windows 2000 Compatible Access
            GPO: Default Domain Controllers Policy
                Policy:            SystemProfilePrivilege
                Computer Setting: Administrators
                                   NT SERVICE\WdiServiceHost
            GPO: Default Domain Controllers Policy
                Policy:            RemoteShutdownPrivilege
                Computer Setting: Administrators
                                   Server Operators
            GPO: Default Domain Controllers Policy
                Policy:            BackupPrivilege
                Computer Setting: Administrators
                                   Backup Operators
                                   Server Operators
            GPO: Default Domain Controllers Policy
                Policy:            EnableDelegationPrivilege
                Computer Setting: Administrators
            GPO: Default Domain Controllers Policy
                Policy:            UndockPrivilege
                Computer Setting: Administrators
            GPO: Default Domain Controllers Policy
                Policy:            SystemEnvironmentPrivilege
                Computer Setting: Administrators
            GPO: Default Domain Controllers Policy
                Policy:            RemoteInteractiveLogonRight
                Computer Setting: INTERNAL\dclemmer
                                   INTERNAL\Developers
                                   INTERNAL\Domain Admins
                                   INTERNAL\Domain Users
                                   INTERNAL\SysAdmins
            GPO: Default Domain Controllers Policy
                Policy:            LoadDriverPrivilege
                Computer Setting: Administrators
                                   Print Operators
            GPO: Default Domain Controllers Policy
                Policy:            IncreaseQuotaPrivilege
                Computer Setting: LOCAL SERVICE
                                   NETWORK SERVICE
                                   Administrators
            GPO: Default Domain Controllers Policy
                Policy:            ProfileSingleProcessPrivilege
                Computer Setting: Administrators
            GPO: Default Domain Controllers Policy
                Policy:            AssignPrimaryTokenPrivilege
                Computer Setting: LOCAL SERVICE
                                   NETWORK SERVICE
        Security Options
            GPO: Default Domain Policy
                Policy:            LSAAnonymousNameLookup
                Computer Setting: Not Enabled
            GPO: Default Domain Policy
                Policy:            TicketValidateClient
                Computer Setting: Enabled
            GPO: Default Domain Controllers Policy
                Policy:            @wsecedit.dll,-59013
                ValueName:         MACHINE\System\CurrentControlSet\Services\NTDS\Parameters\LDAPServerIntegrity
                Computer Setting: 1
            GPO: Default Domain Controllers Policy
                Policy:            @wsecedit.dll,-59043
                ValueName:         MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\RequireSecuritySignature
                Computer Setting: 1
            GPO: Default Domain Controllers Policy
                Policy:            @wsecedit.dll,-59044
                ValueName:         MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\EnableSecuritySignature
                Computer Setting: 1
            GPO: Default Domain Policy
                Policy:            @wsecedit.dll,-59058
                ValueName:         MACHINE\System\CurrentControlSet\Control\Lsa\NoLMHash
                Computer Setting: 1
            GPO: Default Domain Controllers Policy
                Policy:            @wsecedit.dll,-59018
                ValueName:         MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters\RequireSignOrSeal
                Computer Setting: 1
        Event Log Settings
            N/A
        Restricted Groups
            GPO: Default Domain Policy
                Groupname: INTERNAL\SysAdmins
                Members:   N/A
        System Services
            N/A
        Registry Settings
            N/A
        File System Settings
            N/A
        Public Key Policies
            N/A
        Administrative Templates
            GPO: Default Domain Policy
                KeyName:     Software\Policies\Microsoft\Windows\WindowsUpdate\AU\AUOptions
                Value:       3, 0, 0, 0
                State:       Enabled
            GPO: Default Domain Policy
                KeyName:     Software\Policies\Microsoft\Windows\WindowsUpdate\AU\NoAUAsDefaultShutdownOption
                Value:       1, 0, 0, 0
                State:       Enabled
            GPO: Default Domain Policy
                KeyName:     Software\Policies\Microsoft\Windows\WindowsUpdate\AU\AutoInstallMinorUpdates
                Value:       1, 0, 0, 0
                State:       Enabled
            GPO: Default Domain Policy
                KeyName:     Software\Policies\Microsoft\Windows\WindowsUpdate\AU\DetectionFrequency
                Value:       12, 0, 0, 0
                State:       Enabled
            GPO: Default Domain Policy
                KeyName:     Software\Policies\Microsoft\Windows\WindowsUpdate\AU\ScheduledInstallDay
                Value:       0, 0, 0, 0
                State:       Enabled
            GPO: Default Domain Controllers Policy
                KeyName:     SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\fDenyTSConnections
                Value:       0, 0, 0, 0
                State:       Enabled
            GPO: Default Domain Policy
                KeyName:     Software\Policies\Microsoft\Windows\WindowsUpdate\AU\NoAutoRebootWithLoggedOnUsers
                Value:       1, 0, 0, 0
                State:       Enabled
            GPO: Default Domain Policy
                KeyName:     Software\Policies\Microsoft\Windows\WindowsUpdate\AU\NoAUShutdownOption
                Value:       1, 0, 0, 0
                State:       Enabled
            GPO: Default Domain Policy
                KeyName:     Software\Policies\Microsoft\Windows\WindowsUpdate\AU\ScheduledInstallTime
                Value:       3, 0, 0, 0
                State:       Enabled
            GPO: Default Domain Policy
                KeyName:     Software\Policies\Microsoft\Windows\WindowsUpdate\AU\DetectionFrequencyEnabled
                Value:       1, 0, 0, 0
                State:       Enabled
            GPO: Default Domain Policy
                KeyName:     Software\Policies\Microsoft\Windows\WindowsUpdate\AU\NoAutoUpdate
                Value:       0, 0, 0, 0
                State:       Enabled
            GPO: Default Domain Policy
                KeyName:     Software\Policies\Microsoft\Windows\WindowsUpdate\AU\AUPowerManagement
                Value:       1, 0, 0, 0
                State:       Enabled

Backup domain ?

Similar Messages

Maybe you are looking for