Backup encryption

I have a customer who is regulated to encrypt backup data if the tapes leave the location. They are beginning to use a courier service to move them between locations and are looking for a solution to encrypt.
Due to some misinformation from presales, we were under the impression that Backupexec 12.5 could do software encryption for the 9 Netware servers they run. As it turns out, Backupexec can only do hardware encryption and that will require the purchase of 2 LTO4 tape drives (primary and DR site) and new tapes. There's < 500GB of data and the drives are an expensive option
We're currently looking for other options for software encryption and failing that, a known working tape drive or loader that Backupexec supports for hardware encryption for this configuration. The HP 1760 and 1840 drives are listed as supported but with Symantec's less than stellar support, we'd like to know of a solution someone has working.
The media server is Win2003 as Symantec has end-of-lifed the Netware based version.

Originally Posted by mondor
I have a customer who is regulated to encrypt backup data if the tapes leave the location. They are beginning to use a courier service to move them between locations and are looking for a solution to encrypt.
Due to some misinformation from presales, we were under the impression that Backupexec 12.5 could do software encryption for the 9 Netware servers they run. As it turns out, Backupexec can only do hardware encryption and that will require the purchase of 2 LTO4 tape drives (primary and DR site) and new tapes. There's < 500GB of data and the drives are an expensive option
We're currently looking for other options for software encryption and failing that, a known working tape drive or loader that Backupexec supports for hardware encryption for this configuration. The HP 1760 and 1840 drives are listed as supported but with Symantec's less than stellar support, we'd like to know of a solution someone has working.
The media server is Win2003 as Symantec has end-of-lifed the Netware based version.
Mondor,
Try a backup tape backup encryption by Zecurion...

Similar Messages

  • I forgot the backup encryption password in iTunes how can I get my backup data back?

    I forgot the backup encryption password in iTunes how can I get my backup data back?

    You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (109920)

  • I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

    I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

    To prevent others from reading your mail, don't give them access to your account. If others need to use your computer for some reason, set up personal accounts, or a guest account, and switch to it before allowing them access. This is the simplest, and most effective, method.
    Email message files can be read as plain text in TextEdit or any word processor.
    To protect your email messages from being viewed by others while in your account, you would have to lock the folder, putting it into an encrypted disk image that required a password to be opened and mounted. You would have to double-click on the image and give your password to mount it before launching Mail then unmount it as soon as you're done. My guess is that you could replace the ~/Library/Mail folder with an alias pointing to the folder on the disk image.
    It may work, but it seems like a lot of unnecessary hassle.

  • Schedule Job : Backup Encryption hasnot finish completely.

    Dear Mr/Ms,
               SQL Server 2008 has backup encryption schedule job for 02 databases, but it has just backed up 01 database in several time.
    Access is denied due to a password failure [SQLSTATE 42000] (Error 3279)  BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013).  The step failed.
    I have enough space for backup file.
    Please help me solving this problem completely.
    Thanks and best regards,
      Phong Eximbank.

    Have you tried with PASSWORD='Password123'
    instead of mediapassword?
    Passwords can be used for either media sets or backup sets:
    Media set passwords protect all the data saved to that media. The media set password is set when the media header is written; it cannot be altered. If a password is defined for the media set, the password must be supplied to perform any append or restore
    operation.
    You will only be able to use the media for SQL Server backup and restore operations. Specifying a media set password prevents a Microsoft Windows NT® 4.0 or Windows® 2000 backup from being
    able to share the media.
    Backup set passwords protect only a particular backup set. Different backup set passwords can be used for each backup set on the media. A backup set password is set when the backup set is written to the media. If a password is defined for the backup set,
    the password must be supplied to perform any restore of that backup set.
    https://technet.microsoft.com/en-us/library/aa173504%28v=sql.80%29.aspx?f=255&MSPPError=-2147217396

  • HT201269 I am trying to remove the backup encrypt for my Iphone 4 but the itunes ask for the password and  basically I have not set any password before ...!!! Please note that I entered the password for my apple account and also it did not work, how i can

    I am trying to remove the backup encrypt for my Iphone 4 but the itunes ask for the password and  basically I have not set any password before ...!!! Please note that I entered the password for my apple account and also it did not work, how i can reset it?

    You can't reset it.  If you don't konw the password then you can't use that backup

  • About the iPod backup encryption password

    I just updated my iOS (from 4.2 to 6.0) and let the iPod store my backup information on my computer, encrypted. Like surely many before me, I do not know what the password is to get my encrypted data back. I don't remember ever entering a password for this. In several other inquiries online, people claim they never set a password. But I know I am forgetful and people can be presumptive, SO:
    Can anyone share with me some information on WHEN or WHETHER this password is saved? When it is saved, does it say specifically that you're setting a password for the backup thing? (If not, what is the form where you enter the new password that will become the backup encryption password?) Is this only a practice implemented from a certain iPod/iPhone generation onward; would someone who purchased a 4th-gen iPod touch not be initially asked to create this password and someone from a year later be asked? Lastly, if in fact those inquiries I mentioned are correct, does Apple just scour your iPod for a password it can use for this purpose, and if so, is there any pattern at all to this that I can use to figure out my password?
    Thanks for reading (and for answering? ),
    A user of Apple products

    When you select "Encrypt ... backup" you get this dialog:
    The password can be added to the keychain, however, the password may have been one-way encrypted and is not retrivable.

  • Disable Backup Encryption, forgot password

    Hi there,
    I've forgotten my backup encryption password.  I deleted all my existing backups hoping it would let me just disable the encryption altogether but it seems this is not the case.
    Is there any way to encrypt the backups without restoring the iPod?  Hoping there is some configuration file with a flag that says "Encrypt = yes"

    No way that iknow of.  The Apple acticle is very clear:
    If you cannot remember the password and want to start again, you will have to do a full software restore and when prompted by iTunes to select the backup to restore from, choose Set up as a new device.
    From:
    http://support.apple.com/kb/HT1766

  • Forgot backup encrypt password!

    I'm running Windows 7 and i transferring my information from my iphone to my samsung s4. The easy sync app has asked me to remove the backup encryption password. I have forgotten my password is there any way of finding out what my password is?

    If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync. 
    If you cannot remember the password and want to start again, you can use a SmartKey iTunes Backup Password Recovery to unlock iTunes backup password at first. Check out http://www.recoverlostpassword.com/products/itunes-backup-password-recovery.html for more details.

  • File backup encryption

    Hi
    i would like to know if when using DPM the file backup is sent encrypted to the server in the transmisión? if not when is this information encrypted?  which kind of encryption does it use?
    thanks
    luis

    Hi Luis,
    there is no encryption on Disk. DPM only supports tape encryption, encrypting the data while it is written to tape.
    If you want to have your disk backups encrypted, you have to:
    1. encrypt the files. DPM will back them up and restore them and does not care whether they are encrypted or not.
    2. Use Hardware Encryption of your storage if supported. This is transparent to DPM. DPM does not know that the data is encrypted while writing it.
    Cheers
    Chaib
    P.S.: Here is a link describing how to set up tape encryption for your protection groups:
    http://technet.microsoft.com/de-de/library/jj628058.aspx

  • Backup Encryption in SQL Server Standard Edition

    Hello,
    I need experts advice on Backup encryption options available in SQL Server 2008 R2 Standard Edition. I know TDE is available, but only in Sql Server 2008 R2 Enterprise edition. But we are using Standard Edition.
    Thanks

    Password protect is not the same thing as encryption - the data is still clear text. This is what Books Online for SQL Server 2008 say about the password option:
    "The protection provided by this password is weak. It is intended to prevent an incorrect restore using SQL Server tools by authorized or unauthorized users. It does not prevent the reading of the backup data by another method or the replacement of the password.
    This feature will be removed in the next version of Microsoft SQL Server. Avoid using this feature in new development work, and plan to modify applications that currently use this feature. "
    And in 2012 this option is indeed removed from the backup command.
    Tibor Karaszi, SQL Server MVP |
    web | blog

  • Cannot Backup Encrypted Sony Xperia Z1 - Looking For a Work Around

    Hi all,
    Looking for help on how to backup my encrypted Sony Xperia Z1.
    When i attempt to use Sony PC Companion, i get a backup error due to the encryption. 
    Anyone have a suggestion on an alternate means of backup? 
    Thanks heaps!

    I have same issue with Z3 compact. So I have approached Sony support and they clain that this is not an error!.
    Obviously this is an error,  hence I am escalating this at Sony to provide procedure to backup encrypted phone.
    There are a number of 3.party solutions available (even wo rooting), however these are of course not supported by Sony.
    Currently I am using holo backup as a WA for making backup. This is *not* a complete backup, however it captures all user data.

  • IPhone 4S Backup Encryption

    Is backup encryption defaulted to enabled on the iPhone 4S? If so, is there a default password for this?

    Hello Pedroo626
    There are a few things to try to get past the backup requiring a password. The article below will assist further.
    iOS: Troubleshooting encrypted backups
    http://support.apple.com/kb/TS5162
    You can keep trying to restore the device from backup until you remember the password. If you're having trouble, try:
    Leaving the password field blank
    Your Apple ID password
    Your computer account password, if you have one
    Email passwords you may have used
    Your Wi-Fi network password
    Website passwords you may have used
    A password for hard-disk encryption software, if you use it
    Regards,
    -Norm G

  • How to turn off the Backup encryption?

    Hi all,
    Anyone know how to disable the backup encryption in itunes?
    The option is grayed out.
    I still know the password but i want to disable this.
    Any know how to do this without setting the iphone up as a new one?
    Thanks

    @gdgmacguy. That's one reason this can happen. Another reason is if you connected to a corporate Wi-Fi network. There are other scenarios, but they all involve getting corporate certificates onto your iPad. Here's how you fix it:
    Go to Settings!General and look at or scroll down to the bottom. If you have an option called "Profiles" here, this is your problem. Choose Profiles and then choose "Remove" on each one. When they're all gone you'll be able to backup without a password, though you may need to enter it one more time (at least I did).
    The downside of this is that you will no longer be able to access those corporate resources for which you originally obtained the "profile" certificates. Re-obtaining those certs will re-enable password protection of your backups.

  • I have forgotten my backup encryption password

    I am getting a new iPhone soon so I wanted to backup my current iPhone to iTunes on my computer.
    However I have forgotten the backup encryption password so I deleted all the backups on iTunes, hoping that it would allow me to reset the backups without the encryption. Is it possible to remove the encyrption without deleting my iTunes? I would like to create a backup from scratch without removing music and videos saved on my iTunes. Help?

    Check your iKeychain.  The password may be listed there.  Mine was listed under an IP address and user name to my old work computer.  I had used my phone to access work emails (government) that were encrypted.  I didn't actually select the option to encrypt my backup itself but it did require a password when I went to restore.  The password ended up being one I set up when I set up my email account to my phone and viewed those emails, not one I actually set for iTunes directly related to the backup.  Once in iKeychain (Safari, Passwords & Autofill) I was able to view a list of all passwords ever used on my phone and had every intention of trying every single password one by one, but it ended up being the first one listed. Hopefully this helps.

  • I've forgotten my backup encryption password

    Please help me. I must have added a password for my backup encryption on iTunes years ago and now have no idea what it is. I have tried everything I would have thought it was but none work. I upgraded my iPhone 4S' software to iOS7 yesterday but theres something wrong and the final bootup stops halfway and hangs. I wanted to restore from backup but don't know the password. It gets worse as my iPhone 5C arrives today and I'm guessing I'll need this password to setup the new phone with all my data.
    Please can you help?
    thank you

    No way that iknow of.  The Apple acticle is very clear:
    If you cannot remember the password and want to start again, you will have to do a full software restore and when prompted by iTunes to select the backup to restore from, choose Set up as a new device.
    From:
    http://support.apple.com/kb/HT1766

Maybe you are looking for

  • Change logs for Exchange profile

    Hi All, Recently we had a problem with parameter "Bufferinstance" which needs to be False and it was changed to true due to which we had a problem with SLD. Now i have to find out who changed this parameter along with user and date/time details. Can

  • QuickVPN on Verizon 4G not working

    QuickVPN is not making a connection over the Verizon 4G network. After "Activating Policy" it tries to verify the network, but always times out. I get the message "remote gateway is not responding. Do you want to wait? My same setup works on the 3G n

  • Vendor   Solicitation orders

    Hola senors, I think I am asking more general questions but if you can help me in this scenario mapping .I am an JD edward consultant and planning to support the Volunatry work . I appreciate your time in answering questions Breifly my scenario is :

  • Ipad 3 is not starting

    Hello, since this morning my iPad 3 is not starting up again. Just have a black screen. Tried already to load battery with several plugs & different sockets without any success. No reaction from the iPad anymore. Anything else which could be done ? M

  • Plant Maintenance or MM

    Hi All, can any one guide me, i am having experiance in MM & PM domain. I am planning to go for Certification, Which one will be better in terms of Job opportunities and Pay in india and US. Regards, GMK.