Backup error - failure on step 'Browser Push Options"

Every time I try to conduct a backup, i get the same error:
"Error backing up database(s)."
the step in the background is:
"Transfer in progress"
"Browser Push Options (bar all the way filled to the right)"
"Backing up databases... (9/10 filled up to the right) "
Anyone know why this is happening?
I have the 4.5 beta operating system for my 8830 but this problem was ocurring with the official release version 4.2 or whichever it was (meaning it's not the new system).
Help would be appreciated; thanks!
Solved!
Go to Solution.

So it keeps failing when it gets to the Browser Push Options? If it keeps failing on the same one it likely means that there is a corrupt entry in that database. So you can try a few things:
What version of the Desktop Manager do you have? If you don't have 4.6 then download load from here and try the backup again: https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Go into Backup and Restore | Advanced. Using CTRL+mouse click, select all the databases except the one having the error. Then hit the arrow pointing to the left. After the entries are copied to the left side just save them by going to File | Save As. This will save the entries to an IPD file on your computer.
If that fails you may have to clear the database giving you the error. So once again go back into Backup and Restore | Advanced. Select the database giving you trouble on the right side and hit the clear button. This will erase all the entries from that database. Afterwards try doing the backup.
Let us know how it goes
Message Edited by jmrmb80 on 10-23-2008 09:30 PM
Message Edited by jmrmb80 on 10-23-2008 09:30 PM
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Similar Messages

Hi, I know how I can correct an inconsistency in the Firefox 4.0 beta 8, the error is: "sorry your browser is not support program by web dympro. " In IE there is a compatibility option firexfox view settings but can correct this error.

Hi, I know how I can correct an inconsistency in the Firefox 4.0 beta 8, the error is: "sorry your browser is not support program by web dympro. "
In IE there is a compatibility option firexfox view settings but can correct this error.

Hi, I know how I can correct an inconsistency in the Firefox 4.0 beta 8, the error is: "sorry your browser is not support program by web dympro. "
In IE there is a compatibility option firexfox view settings but can correct this error.

Backup Error 0x80080005 Server Failure on Windows 7 Where is the backup catalog to delete?

I also have the Backup Error 0x80080005 Server Failure on Windows 7.
I changed all of the owner to me on all the System Volume Information files but where do I find the backup catalog to delete?
Thank you,
WhiteFox42
Kimberly D. White-Fox

Hi,
You could runt the command %windir%\system32\sdclt.exe /DELETECATALOGANDKICKOFFNEW to delete the catalog. For more detailed information, please see:
How Do I Reset/Wipe Windows 7 Backup catalog remotely?
https://social.technet.microsoft.com/Forums/windowsserver/en-US/30b0857c-3a08-4575-9625-311f967dfa14/how-do-i-resetwipe-windows-7-backup-catalog-remotely?forum=windowsbackup
If the backup error is occurred on Windows 7, this is Windows Server forum, I could suggest you ask for help from Windows 7 forum for better and accurate answer.
https://social.technet.microsoft.com/Forums/en-US/home?forum=w7itproinstall
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Fiori Launchpad Error: Failure - Unable to load groups Resolved!!!!

Hey Good Fellas,
This is a solution rather than a discussion, which i thought to do to with a kind generosity of spirit to give back to the community.
It gives me immense pleasure and happiness to write this particular post, because it is through SCN only i have been able to find the solution.
Ok, let's get down to the Business quickly, shall we?
I have been configuring Fiori App - Approve Purchase Orders. All the tasks for this have been done from SAP Help Site.
Recently I upgraded the ERP/Gateway (Its an embedded deployment) to EHP 7 and UI to SP09, post which the Fiori Launchpad started giving the below error.
If you look around the SCN, you will probably hit across these threads and so did I.
http://scn.sap.com/thread/3571448
SAP Fiori - UI Add-on SP09 update troubleshooting
With the first thread, I tried everyone's solution and suggestions which had worked for others, but it didn't for me.
With second thread (Excellently posted by Masayuki Sekihara), it started off with lots of efforts and double-checks applying all of these notes hoping that it would resolve the issue. But I had done all the steps 1-8 and still didn't get the solution.
Besides the above two mentions I did umpteen number of other ridiculous things like implementing this note, that note, De-implementing another of the notes and everything i found as possible solutions on the Web.
Now, the breakthrough here is checking the errors in /IWFND/ERROR_LOG. Well, on the browser it used to give error 'Failure - Unable to Load Groups' while at the server side, actual error was something unusual and remotely not related to what the error looked like in the browser. In the back-end, I was getting the error "Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist". And this is something i know how to correct.
So just keep looking for the errors in /IWFND/ERROR_LOG and shift your focus there. That's really a good place to trouble-shoot.
And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
I am able to get inside the Fiori Launchpad now (I was quite at edge to really give up as all the possible solutions had been ruled out for me ) and do see the tiles of the apps configured.
I hope this is going to be a good take-away for others who are having Odata handling issues.
The floor is all yours now for your kind feedback. Be gentle with me, I am a very shy blogger.
Best Regards,
Akshay

Steve,
If you still have the error, this is what I did to resolve mines.
1) Goto SPRO - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model
2) Find out the entry for 'ZINTEROP_MODEL_0001_BE'
3) Copy that entire row in a notepad for all the fields
4) Create new Entry with all the fields, except change the Software Version to DEFAULT (As that's what missing for you'
5) Save and give that another try.
This is what I exactly wrote in my solution as well.
Akshay wrote:
And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
A screen-shot perhaps helps you more.
Let the other duplicate entry with Software Version other than Default be there. Important is that the software version that you have defined in your alias must be the one over here.
Let me know how that goes?
-Akshay

Backup Error through db13

Dear Experts,
We are taking backup through db13 ECC Deve Server but getting following error--
Job started
Step 001 started (program RSDBAJOB, variant &0000000000029, user ID BASIS)
Execute logical command BRBACKUP On host sapeccdev
Parameters:-u / -jid TAPIN20091130155408 -i force -c force -n 1 -v SCRATCH
BR0051I BRBACKUP 7.00 (32)
BR0055I Start of database backup: becaipbs.tib 2009-11-30 15.54.08
BR0484I BRBACKUP log file: /oracle/DEV/sapbackup/becaipbs.tib
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.09
BR0301W SQL error -27140 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-27140: attach to post/wait facility failed
BR0310W Connect to database instance DEV failed
BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: becaipbs
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/rmt/2mn
BR0131I All volumes get the name SCRATCH
BR0129I Force option set - no label checking during initialization
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0207I Volume in device: /dev/rmt/2mn will be initialized with name: SCRATCH
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.09
BR0226I Rewinding tape volume in device /dev/rmt/2m ...
BR0202I Copying /oracle/DEV/sapbackup/.tape.hdr0
BR0203I to /dev/rmt/2mn ...
BR0209I Volume in device /dev/rmt/2mn has name SCRATCH
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.16
BR0226I Rewinding tape volume in device /dev/rmt/2m ...
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.18
BR0301E SQL error -27140 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-27140: attach to post/wait facility failed
BR0310E Connect to database instance DEV failed
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.18
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
Kindly revert with helful suggestion.
Regards,
Ajit

Dear Markus,
after the relink all, this is the following log----
Job started
Step 001 started (program RSDBAJOB, variant &0000000000005, user ID BASIS)
Execute logical command BRBACKUP On host qserv
Parameters:-u / -jid TAPIN20091130174249 -i force -c force -n 1 -v SCRATCH
BR0051I BRBACKUP 7.00 (32)
BR0055I Start of database backup: becaiysn.tib 2009-11-30 17.42.49
BR0484I BRBACKUP log file: /oracle/QAS/sapbackup/becaiysn.tib
BR0477I Oracle pfile /oracle/QAS/102_64/dbs/initQAS.ora created from spfile /oracle/QAS/102_64/dbs/spfileQAS.ora
BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: becaiysn
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/rmt/2mn
BR0131I All volumes get the name SCRATCH
BR0129I Force option set - no label checking during initialization
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0207I Volume in device: /dev/rmt/2mn will be initialized with name: SCRATCH
BR0280I BRBACKUP time stamp: 2009-11-30 17.42.49
BR0226I Rewinding tape volume in device /dev/rmt/2m ...
BR0278E Command output of 'LANG=C mt -f /dev/rmt/2m rew':
/dev/rmt/2m: No such device or address
BR0280I BRBACKUP time stamp: 2009-11-30 17.42.50
BR0279E Return code from 'LANG=C mt -f /dev/rmt/2m rew': 1
BR0213E Winding tape volume in device /dev/rmt/2mn failed
BR0219E Initialization of volume SCRATCH in device /dev/rmt/2mn failed
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2009-11-30 17.42.50
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
Regards,
Ajit

Offline backup error ERRORMESSAGE: Error 1495 in dmdb6bkp.c(1092)

Hello Guru's
we are using DB2 database and AIX OS,ECC 5.0.
When we are trying to take offline backup ,the backup Scheduling failed due tot he below error.
Kindly look and let me know to fix the issue ASAP.
Offline backup error logfile.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000251, user ID SAGARK)
Execute logical command DB6_DBBACKUP On host eccprod
Parameters:PRD OFFLINE TO /prdback/sapbackup BUFFERS 0 BUFFERSIZE 0 PARALLELISM 0
Job started
Step 001 started (program RSDBAJOB, variant &0000000000250, user ID SAGARK)
Execute logical command DB6_DBBACKUP On host eccprod
Parameters:PRD OFFLINE TO /prdback/sapbackup BUFFERS 0 BUFFERSIZE 0 PARALLELISM 0
set connect partition: 0
deactivate db PRD...
ERRORMESSAGE: Error 1495 in dmdb6bkp.c(1092):
SQL1495W Deactivate database is successful, however, there is still
a connection to the database.
Making database backup...
Database      = PRD,Backup Mode   = FULL,Backup Options= OFFLINE,Buffer size   = AUTOMATIC,# buffers     = AUTOMATIC
Parallelism   = AUTOMATIC,numLocations = 1,
location[0]   = /prdback/sapbackup
util priority = 0
ERRORMESSAGE: Error -1035 in dmdb6bkp.c(1498):
SQL1035N The database is currently in use. SQLSTATE=57019
Stopping database manager...
ERRORMESSAGE: Error -6036 in dmdb6bkp.c(1299):
SQL6036N START or STOP DATABASE MANAGER command is already in
progress.
Starting database manager...
ERRORMESSAGE: Error -6036 in dmdb6bkp.c(1308):
SQL6036N START or STOP DATABASE MANAGER command is already in
progress.
Making database backup...
Database      = PRD
Backup Mode   = FULL
Backup Options= OFFLINE
Buffer size   = AUTOMATIC
buffers     = AUTOMATIC
Parallelism   = AUTOMATIC
numLocations = 1
location[0]   = /prdback/sapbackup
util priority = 0
ERRORMESSAGE: Error -1224 in dmdb6bkp.c(1498):
SQL1224N A database agent could not be started to service a request,
or was terminated as a result of a database system shutdown or a
force command.
activate db PRD...
ERRORMESSAGE: Error -901 in dmdb6bkp.c(1066):
SQL0901N The SQL statement failed because of a non-severe system
error. Subsequent SQL statements can be processed. (Reason "164".)
SQLSTATE=58004
ERRORMESSAGE: Error -901 in dmdb6bkp.c(1621):
DB6CliConnectUser(): [IBM][CLI Driver] SQL0901N The SQL statement
failed because of a non-severe system error. Subsequent SQL
statements can be processed. (Reason "164".) SQLSTATE=58004
External program terminated with exit code 2
DB6_DBBACKUP returned error status E
TemSe: I/O error
set connect partition: 0
deactivate db PRD...
ERRORMESSAGE: Error 1495 in dmdb6bkp.c(1092):
SQL1495W Deactivate database is successful, however, there is still
a connection to the database.
Making database backup...
Database      = PRD
Backup Mode   = FULL
Backup Options= OFFLINE
Buffer size   = AUTOMATIC
buffers     = AUTOMATIC
Parallelism   = AUTOMATIC
numLocations = 1
location[0]   = /prdback/sapbackup
util priority = 0
ERRORMESSAGE: Error -1035 in dmdb6bkp.c(1498):
SQL1035N The database is currently in use. SQLSTATE=57019
Stopping database manager...
SQL1064N DB2STOP processing was successful.
Starting database manager...
SQL1063N DB2START processing was successful.
Making database backup...
Database      = PRD
Backup Mode   = FULL
Backup Options= OFFLINE
Buffer size   = AUTOMATIC
buffers     = AUTOMATIC
Parallelism   = AUTOMATIC
numLocations = 1
location[0]   = /prdback/sapbackup
util priority = 0
Backup successful. The timestamp for this backup image is : 20100807220016
Backup size is : 107000 MB.
activate db PRD...
DB20000I The ACTIVATE DATABASE command completedsuccessfully.
Job finished
Thanks & Regards,
Mohan Babu Chenna|Capgemini India |

Hello Mohan,
Here we can see that the backup did eventually complete:
Backup successful. The timestamp for this backup image is : 20100807220016 Backup size is : 107000 MB
However there had been some issues to deactivate/activate the database .
As note 594353 states , this is normal and on occurance of this event
the corresponding action is retried up to 10 times .
You can check this via
1. db2diag.log
2. List history backup commands
3. db2ckbkp ... DB2 Check backup command
You can ensure that the backup did complete.
Regards,
Paul

Backup error occured, Error code 3700 "hostfile_error"

HI,
We are trying to MaxDB database backup to tape and getting below error.
===================================================================================================
ERR
-24988,ERR_SQL: SQL error
-104,DBM command impossible at this time
3,Data backup failed
Servertask Info: because Error in backup task occured
Job 1 (Backup / Restore Medium Task) [executing] WaitingT204 Result=3700
Error in backup task occured, Error code 3700 "hostfile_error"
Backupmedium #1 (
.\pipe\backup) I/O Error
Backup error occured, Error code 3700 "hostfile_error"
===================================================================================================
I went through the previous threads regarding the same error but couldn't find a solution.
System Info is Win 2008, MaxDB version 7.7.07.14.
Here is the complete log, please suggest what can be done.
===================================================================================================
DBA Action starts:
Timestamp: 20110831100408   Function: sda   Object: DATA
2011-08-31 10:04:08
Using environment variable 'TEMP' with value 'C:\Windows\TEMP' as directory for temporary files and pipes.
Using connection to Backint for MaxDB Interface.
2011-08-31 10:04:09
Checking existence and configuration of Backint for MaxDB.
    Using environment variable 'BSI_ENV' with value 'G:\sapdb\data\wrk\MXP\bsi.env' as path of the configuration file of Backint
    Reading the Backint for MaxDB configuration file 'G:\sapdb\data\wrk\MXP\bsi.env'.
        Found keyword 'BACKINT' with value 'D:\sapdb\MXP\db\bin\backint.exe'.
        Found keyword 'INPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.in'.
        Found keyword 'OUTPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.out'.
        Found keyword 'ERROROUTPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.err'.
        Found keyword 'PARAMETERFILE' with value 'G:\sapdb\data\wrk\MXP\maxdb_config.par'.
        Found keyword 'ORIGINAL_RUNDIRECTORY' with value 'G:\sapdb\MXP\sapdata'.
    Finished reading of the Backint for MaxDB configuration file.
    Using 'D:\sapdb\MXP\db\bin\backint.exe' as Backint for MaxDB program.
    Using 'G:\sapdb\data\wrk\backint\sapdb.in' as input file for Backint for MaxDB.
    Using 'G:\sapdb\data\wrk\backint\sapdb.out' as output file for Backint for MaxDB.
    Using 'G:\sapdb\data\wrk\backint\sapdb.err' as error output file for Backint for MaxDB.
    Using 'G:\sapdb\data\wrk\MXP\maxdb_config.par' as parameter file for Backint for MaxDB.
    Using '300' seconds as timeout for Backint for MaxDB in the case of success.
    Using '300' seconds as timeout for Backint for MaxDB in the case of failure.
    Using 'G:\sapdb\MXP\sapdata\dbm.knl' as backup history of a database to migrate.
    Using 'G:\sapdb\MXP\sapdata\dbm.ebf' as external backup history of a database to migrate.
    Checking availability of backups using backint's inquire function.
Check passed successful.
2011-08-31 10:04:09
Checking medium.
Check passed successfully.
2011-08-31 10:04:09
Preparing backup.
    Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
    Setting environment variable 'BI_REQUEST' to value 'NEW'.
    Setting environment variable 'BI_BACKUP' to value 'FULL'.
    Constructed Backint for MaxDB call 'D:\sapdb\MXP\db\bin\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\maxdb_
    Created temporary file 'G:\sapdb\data\wrk\backint\sapdb.out' as output for Backint for MaxDB.
    Created temporary file 'G:\sapdb\data\wrk\backint\sapdb.err' as error output for Backint for MaxDB.
    Writing '
.\pipe\backup #PIPE' to the input file.
Prepare passed successfully.
2011-08-31 10:04:09
Starting database action for
     the backup.
    Requesting 'SAVE DATA QUICK TO '
.\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BackupMXP'' from db-kernel.
The database is working on the request.
2011-08-31 10:04:09
Waiting until database has prepared the backup.
    Asking for state of database.
    2011-08-31 10:04:09 Database is still preparing the backup.
    Waiting 1 second ...
    Done.
    Asking for state of database.
    2011-08-31 10:04:10 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2011-08-31 10:04:10
Starting Backint for MaxDB.
    Starting Backint for MaxDB process 'D:\sapdb\MXP\db\bin\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\maxdb_
    Process was started successfully.
Backint for MaxDB has been started successfully.
2011-08-31 10:04:10
Waiting for end of the backup operation.
    2011-08-31 10:04:10 The backup tool is running.
    2011-08-31 10:04:10 The database is working on the request.
    2011-08-31 10:04:15 The backup tool is running.
    2011-08-31 10:04:15 The database is working on the request.
    2011-08-31 10:04:25 The backup tool is running.
    2011-08-31 10:04:25 The database is working on the request.
    2011-08-31 10:04:40 The backup tool is running.
    2011-08-31 10:04:40 The database is working on the request.
    2011-08-31 10:05:00 The backup tool is running.
    2011-08-31 10:05:00 The database is working on the request.
    2011-08-31 10:05:13 The backup tool process has finished work with return code 2.
    2011-08-31 10:05:13 The database has finished work on the request.
    Receiving a reply from the database kernel.
    Got the following reply from db-kernel:
        SQL-Code              :-903
The backup operation has ended.
2011-08-31 10:05:13
Filling reply buffer.
    Have encountered error -24920:
        The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
    Constructed the following reply:
        ERR
        -24920,ERR_BACKUPOP: backup operation was unsuccessful
        The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
Reply buffer filled.
2011-08-31 10:05:13
Cleaning up.
    Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.out)----
        Reading parameter file G:\sapdb\data\wrk\MXP\maxdb_config.par.
        Using staging area D:\TEMP\STAGE1 with a size of 1048576000 bytes.
        Using staging area D:\TEMP\STAGE2 with a size of 1048576000 bytes.
        Using 2 file per Backint for Oracle call.
        Using C:\Program Files\Tivoli\TSM\tdp_r3\ora64\backint.exe as Backint for Oracle.
        Using G:\sapdb\data\wrk\MXP\initMXP.utl as parameterfile of Backint for Oracle.
        Using G:\sapdb\data\wrk\MXP\BackintHistory.txt as history file.
        Using G:\sapdb\data\wrk\backint\backint1.in as input of Backint for Oracle.
        Using G:\sapdb\data\wrk\backint\backint1.out as output of Backint for Oracle.
        Using G:\sapdb\data\wrk\backint\backint1.err as error output of Backint for Oracle.
        Using a maximal delay for a Backint for Oracle call of 3600 seconds.
        Reading input file G:\sapdb\data\wrk\backint\sapdb.in.
        Backing up pipe
.\pipe\backup.
        Found 1 entry in the input file.
        Starting the backup.
        Starting pipe2file program(s).
        Waiting for creation of temporary files.
        1 temporary file is available for backup.
        Calling Backint for Oracle at 2011-08-31 10:05:12.
        Calling 'C:\Program Files\Tivoli\TSM\tdp_r3\ora64\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\initMXP.
        Backint for Oracle ended at 2011-08-31 10:05:13 with return code 2.
        Backint for Oracle output:
        Backint for Oracle output:                          Data Protection for SAP(R)
        Backint for Oracle output:
        Backint for Oracle output:              Interface between BR*Tools and Tivoli Storage Manager
        Backint for Oracle output:              - Version 6, Release 1, Modification 0.0 for Win x64 -
        Backint for Oracle output:                    Build: 358 compiled on Nov 4 2008
        Backint for Oracle output:         (c) Copyright IBM Corporation, 1996, 2008, All Rights Reserved.
        Backint for Oracle output:
        Backint for Oracle output: BKI2027I: Using TSM-API version 6.2.3.1 (compiled with 5.3.2.0).
        Backint for Oracle output: BKI2000I: Successfully connected to ProLE on port tdpr3ora64.
        Backint for Oracle output: BKI0005I: Start of program at: 08/31/11 10:05:12 .
        Backint for Oracle output: BKI1216E: There are no backup management classes available.
        Backint for Oracle output: BKI1215I: Average transmission rate was 0.000 GB/h (0.000 MB/sec).
        Backint for Oracle output: BKI1227I: Average compression factor was 1.000.
        Backint for Oracle output: BKI0020I: End of program at: 08/31/11 10:05:13 .
        Backint for Oracle output: BKI0021I: Elapsed time: 01 sec .
        Backint for Oracle output: BKI0024I: Return code is: 2.
        Backint for Oracle output:
        Backint for Oracle error output:
        Finished the backup unsuccessfully.
        #ERROR
.\pipe\backup
End of output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.out)----
    Removed Backint for MaxDB's temporary output file 'G:\sapdb\data\wrk\backint\sapdb.out'.
    Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.err)----
        Backint for Oracle was unsuccessful.
End of error output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.err)----
    Removed Backint for MaxDB's temporary error output file 'G:\sapdb\data\wrk\backint\sapdb.err'.
    Removed the Backint for MaxDB input file 'G:\sapdb\data\wrk\backint\sapdb.in'.
Have finished clean up successfully.
SAVE/RESTORE request:
SAVE DATA CANCEL
SAVE/RESTORE request accepted:
OK
SAVE/RESTORE result:
ERR
-24988,ERR_SQL: SQL error
-104,DBM command impossible at this time
3,Data backup failed
Servertask Info: because Error in backup task occured
Job 1 (Backup / Restore Medium Task) [executing] WaitingT204 Result=3700
Error in backup task occured, Error code 3700 "hostfile_error"
Backupmedium #1 (
.\pipe\backup) I/O Error
Backup error occured, Error code 3700 "hostfile_error"
DBA Action ends:
Timestamp: 20110831100513   State:    Failure
===================================================================================================

Hi Markus,
Thanks for quick response. I did checked KNLMSG file and it has XML file kind of information where as dbm.prt has some information and here it is
=================================================================================================
2011-08-31 10:18:30 0x00009ecc INF          1 DBMSrvCo A DBM Server client connection was established at 2011-08-31 10:18:29 (client process has process ID 24352 on computer 10.1.47.21).
2011-08-31 10:18:30 0x00009ecc INF        283 DBMSrv   Command 'auto_extend show' is being executed.
2011-08-31 10:18:30 0x00009ecc INF        419 DBMSrv   Command 'auto_extend' has ended with return code 0.
2011-08-31 10:18:30 0x00009ecc INF        283 DBMSrv   Command 'auto_update_statistics show' is being executed.
2011-08-31 10:18:31 0x00009ecc INF        419 DBMSrv   Command 'auto_update_statistics' has ended with return code 0.
2011-08-31 10:18:41 0x00009ecc INF        283 DBMSrv   Command 'backup_save "Backup" DATA RECOVERY' is being executed.
2011-08-31 10:18:42 0x00009ecc INF          1 DBMKnl   Sending an administrative statement to the database
                    0x00009ecc INF          8 DBMKnl   Statement: SAVE DATA QUICK TO '
.\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'Backup'
2011-08-31 10:19:47 0x00009ecc ERR          3 DBMKnl   Received the result of an administrative statement from the database
                    0x00009ecc ERR          9 DBMKnl   Statement: SAVE DATA QUICK TO '
.\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'Backup'
                    0x00009ecc ERR         10 DBMKnl   Returncode: -903
                    0x00009ecc ERR          5 DBMKnl   Errortext: Host file I/O error
2011-08-31 10:19:47 0x00009ecc ERR     -24580 DBMSrv   ERR_COMMAND_FAILED: Command 'backup_save' has ended and failed with return code -24920.
                    0x00009ecc ERR     -24920 DBMSrv   ERR_BACKUPOP: backup operation was unsuccessful
                    0x00009ecc ERR     -24778 DBMSrv   The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
2011-08-31 10:19:53 0x00009ecc INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 24352 on computer 10.1.47.21).
2011-08-31 10:19:53 0x00009ecc INF          1 DBMKnl   Sending an administrative statement to the database
                    0x00009ecc INF          8 DBMKnl   Statement: SAVE DATA CANCEL
2011-08-31 10:19:53 0x00009ecc ERR          3 DBMKnl   Received the result of an administrative statement from the database
                    0x00009ecc ERR          9 DBMKnl   Statement: SAVE DATA CANCEL
                    0x00009ecc ERR         10 DBMKnl   Returncode: -104
                    0x00009ecc ERR          5 DBMKnl   Errortext: DBM command impossible at this time

After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version"

After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version". Any help will be greatly appreciated.

Sorry,
Yes, the error message is exactly like that ("Database error: failured to persist version")
No photos will import at all. I use USB to import from iPhone 5s or iPad 2.
About the difference? iPhoto and Photos . Are there two softwares?
I also will like to merge and/or synchronize all my photos I had saved to iCloud backups, Macbook Pro, iPhone 5s and iPad hard drives using iPhoto. It's call iPhoto library. At one point I turned off streaming.
Thanks again Larry HN.

Excel Named Items not showing up in Browser View Options list

Hi,
Using excel 2013 - when I create named ranges under the 'formulas' tab, I expect to see them show up in the 'show' tab under Browser View options. However they aren't there - when I look at the 'items in the workbook' list I only see the charts and
pivot tables in my workbook, not the named items.
Is there some setting I need to flip on to see these times (and then use them in sharepoint)?
Thanks

Today, I tried it again and now I could see the Name range under Browser View Options list, this is my step as below:
1. Type the value in Cell A1 to B4. (Same as the screenshot as the last reply)
2. Directly type Test in Name Box.
3. Go to File > Info > Browser View options > Items in the Workbook.
Now the Name is appearing.
But when we define a name to a blank range, we would not see the Name in the Browser View options anymore. Try in your site.
By the way, My using version is Office 36 ProPlus, version 15.0.4551.1005.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

Backup error due to System Writer missing (enumeration of system32 printer dlls takes too long)

Hi,
On a Windows 2008 R2 we get a Windows Backup error while backupping System State (event id: 5, error code: '2155347997').
We tried *ALL* solutions found on Internet regarding the same issue (and we also applied the suggested hotfix KB2807849) but without success. So we DIGGED INTO VSS to see what is happening.
***1) First we saw that an USB printer had a problem and this resulted in
hundreds of entries in the following registry keys:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100010]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100011]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100012]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}\79590]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}\79591]
***2) We completely removed ALL drivers/devices related to that printer (now the DeviceNameStore is empty and
pnputil -e returns no driver related to the printer)
***3) Using process monitor we saw that during vssadmin list writers the system is searching for the DLLs related to that printer AND SEEMS CAUGHT IN AN ENDLESS LOOP: this is an excerpt of the scan:
09:56:34,5205954   svchost.exe   324   RegSetValue   HKLM\System\CurrentControlSet\services\VSS\Diag\System Writer\IDENTIFY (Enter)   SUCCESS
09:57:18,2310377 svchost.exe 324 QueryDirectory C:\Windows\System32\spool\drivers\color\cnz005.icc NO SUCH FILE Filter: cnz005.icc
09:57:18,2312877 svchost.exe 324 QueryDirectory C:\Windows\System32\spool\drivers\color\cnf6500m.icc NO SUCH FILE Filter: cnf6500m.icc
09:57:18,2314854 svchost.exe 324 QueryDirectory C:\Windows\System32\cncmfp20.ini NO SUCH FILE Filter: cncmfp20.ini
09:57:18,2316416 svchost.exe 324 QueryDirectory C:\Windows\System32\cnclsi20.dll NO SUCH FILE Filter: cnclsi20.dll
... and so on
.... THE SAME FILES ARE REPEATED HUNDREDS OF TIMES!!!! ...
It seems that somewhere there is a catalog of system files which still contains the references to the (same) files used by the hundreds of devices that WERE present in the DeviceNameStore (see point ***1 above, but now it is empty), and the System
Writer continues to search/enumerate those files and fails.
How can I fix it ? Is there a way to "reset" the System Writer and "rebuild" (???) the correct files that it should backup? (in order to complete a successfull system state backup)
Can you help me?
Thank you in advance.
EDIT: some additional (useful?) information:
* we also ran chkdsk /f C:
* sfc /scannow completes without errors
* in the vssadmin list writers the "system writer" is missing (but - as said above - when we run it the associated process repeatedly search printer dll files in the System32 directory)
* perhaps those file are contained is some filemaps catalog ?!? Is there a way to "reset" them?!?
***EDIT 2***:
I found that the reference to those missing DLLs are in ***C:\Windows\inf\setupapi.ev3*** but if I move the file away the System Writer continues not being listed in vssadmin list writer (though the vssadmin command complete very fast).
This is what is happening:
svchost.exe   324   CloseFile   C:\Windows\inf   SUCCESS
svchost.exe   324   CloseFile   C:\Windows\System32\DriverStore\infpub.dat   SUCCESS
svchost.exe   324   CreateFile   C:\Windows\System32\DriverStore\infpub.dat   ACCESS DENIED
svchost.exe   324   CreateFile   C:\Windows\System32\DriverStore\infstor.dat   ACCESS DENIED
svchost.exe   324   CreateFile   C:\Windows\System32\DriverStore\infstrng.dat   ACCESS DENIED
svchost.exe   324   CreateFile   C:\Windows\System32\DriverStore\drvindex.dat   ACCESS DENIED
svchost.exe   324   CreateFile   C:\Windows\System32\DriverStore\INFCACHE.0   NAME NOT FOUND
svchost.exe   324   CreateFile   C:\Windows\System32\DriverStore\INFCACHE.1   ACCESS DENIED
svchost.exe   324   CreateFile   C:\Windows\System32\DriverStore\INFCACHE.2   NAME NOT FOUND
svchost.exe   324   CreateFile   C:\Windows\inf   SUCCESS
svchost.exe   324   QueryBasicInformationFile   C:\Windows\inf   SUCCESS
svchost.exe   324   RegCloseKey   HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup   SUCCESS
svchost.exe   324   CreateFile   C:\Windows\inf\setupapi.ev1   SUCCESS
svchost.exe   324   QueryStandardInformationFile   C:\Windows\inf\setupapi.ev1   SUCCESS
svchost.exe   324   CreateFileMapping   C:\Windows\inf\setupapi.ev1
svchost.exe   324   QueryStandardInformationFile   C:\Windows\inf\setupapi.ev1   SUCCESS
svchost.exe   324   CreateFileMapping   C:\Windows\inf\setupapi.ev1
svchost.exe   324   CreateFile   C:\Windows\inf\setupapi.ev2   SUCCESS
svchost.exe   324   QueryStandardInformationFile   C:\Windows\inf\setupapi.ev2
svchost.exe   324   CreateFileMapping   C:\Windows\inf\setupapi.ev2
svchost.exe   324   QueryStandardInformationFile   C:\Windows\inf\setupapi.ev2   SUCCESS
svchost.exe   324   CreateFileMapping   C:\Windows\inf\setupapi.ev2
svchost.exe   324   CreateFile   C:\Windows\inf\setupapi.ev3   SUCCESS
svchost.exe   324   QueryStandardInformationFile   C:\Windows\inf\setupapi.ev3
svchost.exe   324   CreateFileMapping   C:\Windows\inf\setupapi.ev3
svchost.exe   324   QueryStandardInformationFile   C:\Windows\inf\setupapi.ev3
svchost.exe   324   CreateFileMapping   C:\Windows\inf\setupapi.ev3   SUCCESS
svchost.exe   324   CreateFile   C:\Windows\System32\drivers   SUCCESS
svchost.exe   324   QueryDirectory   C:\Windows\System32\drivers\acpi.sys   SUCCESS
svchost.exe   324   QueryDirectory   C:\Windows\System32\drivers\rdpbus.sys   SUCCESS
svchost.exe   324   QueryDirectory   C:\Windows\System32\drivers\i8042prt.sys   SUCCESS
.... EVERYTHING IS OK UP TO HERE ...
svchost.exe   324   CloseFile   C:\Windows\System32\drivers   SUCCESS
svchost.exe   324   CreateFile   C:\Windows\System32   SUCCESS
svchost.exe   324   QueryDirectory   C:\Windows\System32\cncc6500.dll   NO SUCH FILE   Filter: cncc6500.dll
svchost.exe   324   QueryDirectory   C:\Windows\System32\cnci6500.dll   NO SUCH FILE   Filter: cnci6500.dll
svchost.exe   324   QueryDirectory   C:\Windows\System32\cncc6500.dll   NO SUCH FILE   Filter: cncc6500.dll
svchost.exe   324   QueryDirectory   C:\Windows\System32\cnci6500.dll   NO SUCH FILE   Filter: cnci6500.dll
... !!!!!GET CAUGHT IN AN ENDLESS LOOP!!!!!!!! (System Writer probably ends for timeout)...
Is there a way to rebuild/modify that file C:\Windows\inf\setupapi.ev3
Perhaps I can delete the catroot2 directory?

Hi,
Please check if there are number of files in Temporary ASP.NET folders under "C:\Windows\Microsoft.Net\Framework". If so, clear these files then restart the server to check the results.
In additional, you could try the steps below to troubleshoot the issue:
1. Give NETWORK SERVICE Read permissions on COM+ Event System.
a. Open the registry editor and navigate to HKLM\CurrentControlSet\Services\EventSystem.
b. Right click on the EventSystem and then select ‘Permissions’
c. Click on ‘ADD’ button and then type in ‘NETWORK SERVICE’ and give it READ permission.
d. Reboot the machine and then run the 'VSS admin list writers' to check if it shows up the 'system writer'.
2. If the step 1 doesn't work then move the contents of C:\Windows\winsxs\FileMaps to an alternate location. Then run the command 'VSS admin list writers' to check if it shows up the 'system writer'. Is so, some of those files maybe corrupted and we
need to identify them and replace the files from a healthy machine.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

JDeveloper 11.1.2.0.0 Version Application wizard : File Backup Error

hi
As shown in the scenario (sc1) screencast at http://screencast.com/t/GA7OcgYZ
the JDeveloper 11.1.2.0.0 Version Application wizard can fail sometimes, showing a "File Backup Error" dialog, with the message
"Failed attempting to back up imported resource
D:\screencast\VersionAppLockedIssueApp-v0.01\VersionAppLockedIssueApp\Model.
Check that there are no file system explorers viewing files in this location and that none of the files are open in other applications before resuming."
This even occurs when there are no other processes (like Windows Explorer or an editor) using/locking the file.
It should be possible to reproduce the behaviour using the example application
at http://www.consideringred.com/files/oracle/2011/VersionAppLockedIssueApp-v0.01.zip
which is really nothing special I think, so it might also reproduce using another application.
First open the application and also open the file "browseEmployees.jsf" in design view.
After that, as it seems, the Version Application wizard fails.
Note that it might be relevant that I am using Windows 7, as I can imagine that this could behave differently when using JDeveloper on other operating systems.
Also note, if I try to ZIP the application folder (instead of using the Version Application wizard) after opening the file "browseEmployees.jsf" in design view, I get a message like "WARNING: The process cannot access the file because it is being used by another process.
: D:\screencast\VersionAppLockedIssueApp-v0.01\VersionAppLockedIssueApp\.data\00000000\je.lck ",
as can be seen in the scenario (sc2) screencast at http://screencast.com/t/rFiL47Bil
As it seems that the Version Application wizard has managed to commit the source files, one workaround could be to checkout the source in another location and continue working there.
Other suggestions to avoid this issue, or deal with it, are welcome.
questions:
- (q1) Can this "File Backup Error" behaviour for the Version Application wizard be reproduced?
- (q2) How can this "File Backup Error" behaviour for the Version Application wizard be explained?
many thanks
Jan Vervecken

fyi
Today I noticed that there is a My Oracle Support note about this:
- note id 1353389.1 , "In JDeveloper11.1.2.0.0 the Version Application Wizard Failed with the Error: File Backup Error "
Its "Solution" section currently says:
"The problem is still investigated by development.
But there is a possible workaround for Bug 12912410 by unchecking the checkbox 'Perform Checkout' in step 5 of 6 in the wizard screen. "
regards
Jan

Lsmw error 'Specify Files first' while executing option 'Read Data'.

Hi All,
while trying to create mass users through LSMW, i am gettign the error 'Specify Files first' while executing option 'Read Data'.
I have specified file (.txt), manually created (with'1 tab space' between each term). i have used option 'On the PC(Frontend)'. No error while saving.
Next- i have executed 'Assign Files', where the file appeared automatically.
Next- Here, when i try to execute 'Read Data', i get the error 'Specify Files first'.
Can anyone help in resolving this error.

Hello Plaban,
What is your purpose? Are you tring to upload the data with more file variant?
There are two possibilities to make file names more variable:
1.If you choose system dependent file names by setting the according flag (in the first step 'Maintain object attributes'), you can define file names for each system in step 'Specify files' by assigning the files to a specific system ID (with a double-click on the specified file).
2.You can use wildcards in the file names where you can assign several values.
I hope this helps you.
Regards,
Blanca

APP-PAY-06153 SYSTEM ERROR:Procedure at step 1

Hi All,
I select Inventory ,Vision Operations(USA) responsibility---------->Setup----->Oraganisations----->organisations
when i selected that getting the below error.
APP-PAY-06153 System Error:Procedure INIT_FORMS STEP 1
cause: The Procedure INIT_FORMS created an error at STEP 1
ACTION: contact your system administrator quoting the procedure INIT_FORMS and step 1.
any suggesions on this.
Regards,
Nag.

931161 wrote:
I having the same issue in CA Super HRMS Manager Responsibility>Enter and Maintain Form when I have tried to open giving me this error.Do I need to set up under this responsibility ?
profile options HR:Security Profile:What value to select?
and HR:Business Group :What value to select?
HR:User Type ...What value to select?It depends on your setup.
http://www.oracle.com/pls/ebs121/ranked?word=HR:Business+Group&partno=e13477
http://www.oracle.com/pls/ebs121/ranked?word=HR:Business+Group&partno=e13471
Thanks,
Hussein

Backup error during iOS5 update

Just trying to update my ipad2 to iOS5 and iTunes gives me a message - unable to backup error -54, with the option to continue but lose all the data. Backs up perfectly during a normal sync - just won't do it for the update. Does anyone know why this error is hapenning and what to do about it please?

http://support.apple.com/kb/TS3694#error48

Oracle Secure Backup error: 'No such file or directory'

Hi,
could you help me to fix the following issue?
RMAN> run { ALLOCATE CHANNEL c1 DEVICE TYPE sbt PARMS='SBT_LIBRARY=C:\windows\
system32\orasbt.dll' ; backup database format 'CF_%d_%T_s%sp%pt%t'; }
using target database control file instead of recovery catalog
allocated channel: c1
channel c1: SID=8 device type=SBT_TAPE
channel c1: Oracle Secure BackupStarting backup at 26-OCT-09
channel c1: starting full datafile backup set
channel c1: specifying datafile(s) in backup set
input datafile file number=00001 name=C:\APP\AIME\ORADATA\ORCL\SYSTEM01.DBF
input datafile file number=00002 name=C:\APP\AIME\ORADATA\ORCL\SYSAUX01.DBF
input datafile file number=00003 name=C:\APP\AIME\ORADATA\ORCL\UNDOTBS01.DBF
input datafile file number=00004 name=C:\APP\AIME\ORADATA\ORCL\USERS01.DBF
input datafile file number=00005 name=C:\APP\AIME\PRODUCT\11.2.0\DBHOME_1\DATABA
SE\TBS_5.F
channel c1: starting piece 1 at 26-OCT-09
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on c1 channel at 10/26/2009 00:20:54
ORA-19506: failed to create sequential file, name="CF_ORCL_20091026_s10p1t701223
652", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_cat_query: Query for piece CF_ORCL_20091026_s10p1t701223652 failed.
(Oracle Secure Backup error: 'No such file or directory').
Thanks,
jun

You can work entirely in Xcode by using the command-line tool template in C. Xcode > File > New > Project > Command-Line Tool > Next > Language: C > Next > Create.
If you do want to work on the command line, you may as well just use the "clang" program instead. The "gcc" tool is just a compatibility tool for existing scripts that are expecting the actual "gcc" program. Apple hasn't used the real "gcc" for years. (Read up on the GPLv3 for more information.)
The gcc/clang arguments are the same. The "-c" flag instructs the compiler to only compile a single .c file into a .o object file. It won't create an executable. If you are only compiling a single source file, just omit the "-c" flag and the compiler will create an executable named "a.out" that you can run by typing "./a.out". You can specify "-o <executable name>" if you want to specify a name. Once you get more than a handful of source files, using the terminal starts to become a hassle. At that point, you definitely want to start using Xcode.
I'm not sure why you would try to compile "helloworlddot1.c" and then get an error message about "filename.c". Something else is wrong.
If you are working in the Terminal, it is easiest to use the "cd" command to move into the same directory as your source files. Then you don't have to keep typing the full path.
It is hard to say what the "best" community is. There are many to choose from.

Backup error - failure on step 'Browser Push Options"

Similar Messages

Maybe you are looking for