Backup Error "Server execution failed (0x80080005)"

Is there an answer to this problem yet?
Is there a correction to the underlying bug which "seems" to be that ownership of certain system files is being changed by the system? I only take that from some of the attempts at answers which seemed not to work. The last effective comment I
can find is that the bug is being investigated, but as the initial report was in 2010 and there is still no apparent answer, will there be one soon?
Have I missed something? Is the proper answer in a thread not covered by the above links?
I note that the backup system in Windows 8 seems to be a major revision. Has the Windows 7 backup system been abandoned?
Dave

Hi,
Regarding to the ownership, did you mean the owner for folder "System Volume Information" under system drive which was disscussed in this thread
http://social.technet.microsoft.com/Forums/en-US/29bd3fc9-9538-4d82-9b13-96263c4f2f73/starting-windows-7-backup-server-execution-failed0x80080005-?forum=windowsbackup
If you have already set the owner of the folder to "system" and give full permissions and issue presists. I suggest you return your system to a previous point if you have a restore point, check whether the issue persists.
In Windows 8, there is a option "Windows 7 File Recovery" in Control Panel\All Control Panel Items which has the same function as "Backup and Restore" in Windows 7.
Yolanda Zhu
TechNet Community Support

Similar Messages

Starting Windows 7 Backup : Server execution failed(0x80080005) ????

A MSFT asked me to post here and here is a link to my original post and some troubleshooting already done.
http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/8669451c-772e-4bb4-91b0-9b089bf5c2cd/
My original first post in that forum:
Running a Sony VGN-NS140E laptop with Windows 7 Home Premium x64. This was a "clean" install versus an upgrade install. When I try to "Set up backup" under "Backup and Restore" I get an error "The backup application could not start due to an internal error: Server execution failed(0x80080005)". I am running Comodo x64 Internet Security (Firewall, AntiVirus, AntiSpyware) and am not running a system registry cleaner or optimizer in the background, although I have run CCleaner as a registry cleaner in the past. I do not know if this is a new or old problem as this is the first time I tried to use Windows Backup. I did try starting both Volume Shadow Copy service and Microsoft Software Shadow Copy Provider service , they both successfully started but Windows Backup still produces this error. Thank you in advance for your help.
Problem still occurs, thanks for your interest.

Hello,
Can you please zip the folder %windir%\logs\WindowsBackup and send it to [email protected] (Use the highlighted part only) for analyzing the problem. Please keep the subject of the email same as this thread for easy tracking.
Thanks,
Bikash Agrawala [MSFT]
--------------------------------------------------------------------------------- This posting is provided "AS IS" with no warranties, and confers no rights

Virtual Machine Failes to Start: Server execution failed (0x80080005).

Hi
I have a Windows 8.1 (with updates) System which was upgraded from Windows 8.0 using a Clean Install. Recently Hyper-V has stopped running on my system.
The Event log shows an error:
'CentOS65' failed to start worker process: Server execution failed (0x80080005). (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
-    System
-    Provider
           [ Name]    Microsoft-Windows-Hyper-V-VMMS
           [ Guid]    {6066F867-7CA1-4418-85FD-36E3F9C0600C}
   EventID    15500
   Version    0
   Level    2
   Task    0
   Opcode    0
   Keywords    0x8000000000000000
-    TimeCreated
           [ SystemTime]    2014-07-17T07:57:28.568965100Z
   EventRecordID    302
   Correlation
-    Execution
           [ ProcessID]    4040
           [ ThreadID]    1396
   Channel    Microsoft-Windows-Hyper-V-VMMS-Admin
   Computer    viveksasmung
-    Security
           [ UserID]    S-1-5-18
-    UserData
-    VmlEventLog
   VmName    CentOS65
   VmId    9EF5529D-3755-40B3-AC6A-325A564D19BB
   ErrorMessage    %%2148007941
   ErrorCode    0x80080005
The WMI-Activity log shows the error:
Id = {00000000-0000-0000-0000-000000000000}; ClientMachine = VIVEKSASMUNG; User = viveksasmung\Vivek; ClientProcessId = 9756; Component = Core; Operation = Start IWbemServices::ExecNotificationQuery - root\virtualization\v2 : select * from __InstanceDeletionEvent
within 2 where TargetInstance ISA 'Msvm_ComputerSystem' ; ResultCode = 0xC7F0FCD0; PossibleCause = Could not send status to client
The Hyper-V-VMMS Admin Log shows the error:
The worker process for virtual machine 'CentOS65' failed to respond within the startup timeout period and was restarted. (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
'CentOS65' failed to start. (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
The Hyper-V Worker Log shows the error:
The Virtual Machine Worker Process has lost its connection to the root\virtualization WMI namespace: General access denied error (0x80070005). As a result, some WMI operations may not function correctly. To correct the problem, try restarting the Windows
Management Instrumentation service.
I set the Hyper-V Tracing to ON using vmconnect.config
file and the error log is as follows:
Tracing Hyper-V Client version: 6.3.0.0. Rough build date (virtman file written): 05/18/2014 23:25:02
2014-07-17 01:55:28.990 [08] USER_ACTION_INITIATED VMBrowser ServerNode:ConnectToServer() Connecting to server localhost...
2014-07-17 01:55:29.008 [08] USER_ACTION_COMPLETED VMBrowser ServerNode:ConnectToServer() Successfully connected to server.
2014-07-17 01:55:29.463 [07] WARNING VirtMan WmiAssociation:GetRelatedObjects() The WMI object 'Msvm_RdvComponentSettingData' + could not be mapped to VirtMan type so ignore it.
2014-07-17 01:55:33.001 [03] USER_ACTION_INITIATED VMBrowser ServerNodeViewControl:OnStartVm() Starting VM(s)...
2014-07-17 01:55:33.023 [09] USER_ACTION_INITIATED VMBrowser VMActionBatchPerformer:Perform() Changing virtual machine '9EF5529D-3755-40B3-AC6A-325A564D19BB' ('CentOS65') state from 'PowerOff' to 'Running'
2014-07-17 01:59:33.927 [12] ERROR VirtMan ThrowHelper:ThrowVirtualizationOperationFailedException() Operation 'SetState' failed with message ''CentOS65' failed to start.'.
    Error code '32768'.
    Detailed message ''CentOS65' failed to start. (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)
'CentOS65' failed to start worker process: Server execution failed (0x80080005). (Virtual machine ID 9EF5529D-3755-40B3-AC6A-325A564D19BB)'.
2014-07-17 01:59:33.930 [12] ERROR VMBrowser VMActionBatchPerformer:OnTaskCompleted() Tracked task operation failed!
    'CentOS65' failed to start.
       at Microsoft.Virtualization.Client.Management.ThrowHelper.ThrowVirtualizationOperationFailedException(String errorMsg, String errorDescriptionMsg, VirtualizationOperation operation, Int64 errorCode, Boolean operationCanceled,
ErrorCodeMapper mapper, Exception innerException)
   at Microsoft.Virtualization.Client.Management.View.EndMethodReturnInternal(IVMTask task, VirtualizationOperation operation, Boolean affectedElementExpected)
   at Microsoft.Virtualization.Client.Management.VMComputerSystemBaseView.EndSetState(IVMTask setStateTask)
   at Microsoft.Virtualization.Client.VMBrowser.ChangeVMStatePerformer.EndTrackedTask(IVMTask task)
   at Microsoft.Virtualization.Client.VMBrowser.VMActionBatchPerformer.OnTaskCompleted(Object sender, EventArgs e)
2014-07-17 01:59:46.103 [03] USER_ACTION_INITIATED VMBrowser ServerNode:DisconnectFromServer() Disconnecting from server localhost...
2014-07-17 01:59:46.104 [03] USER_ACTION_COMPLETED VMBrowser ServerNode:DisconnectFromServer() Server had been disconnected successfully.
Upon using BCDEdit, output is below
Windows Boot Manager
identifier              {bootmgr}
device                  partition=\Device\HarddiskVolume1
path                    \bootmgr
description             Windows Boot Manager
locale                  en-GB
default                 {current}
resumeobject            {37225af7-cc62-11e3-8277-806e6f6e6963}
displayorder            {current}
                        {3ce506e4-cc90-11e3-8b9f-8a809d5a6432}
timeout                 30
Windows Boot Loader
identifier              {current}
device                  partition=C:
path                    \Windows\system32\winload.exe
description             Windows 8.1 Pro with Media Center
locale                  en-GB
recoverysequence        {3ce506df-cc90-11e3-8b9f-8a809d5a6432}
recoveryenabled         Yes
osdevice                partition=C:
systemroot              \Windows
resumeobject            {37225af7-cc62-11e3-8277-806e6f6e6963}
bootmenupolicy          Legacy
hypervisorlaunchtype    Auto
quietboot               No
Real-mode Boot Sector
identifier              {3ce506e4-cc90-11e3-8b9f-8a809d5a6432}
device                  partition=C:
path                    \Hd0Par3.pbr
description             Ubuntu LTS 14.04
I have set permissions to the VHD folder using the command below
icacls "c:\CentOS65\CentOS65" /grant "CREATOR OWNER":(OI)(CI)(IO)F
icacls "c:\CentOS65\CentOS65" /grant "NT AUTHORITY\SYSTEM":(OI)(CI)F
icacls "c:\CentOS65\CentOS65" /grant "NT VIRTUAL MACHINE\Virtual Machines":(RC,S,GR,RD,WD,AD,REA,RA)
icacls "c:\CentOS65\CentOS65" /grant "NT VIRTUAL MACHINE\Virtual Machines":(CI)(IO)(GR,WD,AD)
icacls "c:\CentOS65\CentOS65\Virtual Hard Disks" /grant "NT VIRTUAL MACHINE\Virtual Machines":(RC,S,GR,RD,WD,AD,REA,RA)
icacls "c:\CentOS65\CentOS65\Virtual Hard Disks" /grant "NT VIRTUAL MACHINE\Virtual Machines":(CI)(IO)(GR,WD,AD)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome_9E7FEF2E-85E0-4278-AABD-01D5E45EE643.avhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65_28FF0E50-0FBA-4754-A4CC-B3DAEC7E3DAA.avhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(RC,S,GR,GW,RD,WD,AD,REA,WEA,RA,WA)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOS65.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(F)
icacls "C:\CentOS65\CentOS65\Virtual Hard Disks\CentOSHome.vhdx" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(F)
icacls "C:\CentOS65\CentOS65\Virtual Machines\9EF5529D-3755-40B3-AC6A-325A564D19BB.xml" /grant "NT VIRTUAL MACHINE\9EF5529D-3755-40B3-AC6A-325A564D19BB":(F)
I am unable to create new VMs as well.
I have already run
sfc/ scannow
DISM
Already Tried disabling the antivirus
Upon using wbemtest and connecting to root\virtualization, I am able to click Enum Classes > Recursive
Kindly suggest how to get HyperV working please. Any help (short of reinstalling /resetting windows) would be much appreciated.
Warm Regards,
Dr Vivek Gupta

Hi,
The key point would be this:
The Virtual Machine Worker Process has lost its connection to the root\virtualization WMI namespace: General access denied error (0x80070005).
Please open MMC, add Component Services snap-in:
Component Services -> Computers -> My Computer -> DCOM Config -> Windows Management Instrumentation -> Right Click, Properties -> Security “Launch and Activation Permission” -> Edit -> gave Authenticated Users
Full Control
Check the result.
Alex Zhao
TechNet Community Support

Windows Media Player in Windows 8 Pro-64 Bit - Server Execution Failed

I'm running Windows 8 Pro - 64bit. I have also installed Windows Media Center add-on.
Windows Media Player returns an error "Server Execution Failed" when attempting to load any non-music media file, such as .avi, .mp4, .wmv, etc. These files open and play properly in the base Windows 8 "app" Video, and in Windows Media Center.
WMP opens OK from a desktop shortcut and updates it's music libraries. It plays all types of audio-only media files properly.
I have tried all the various "fixes" for various versions of Windows and WMP including removing WMP as a feature, rebooting and "re-installing" it as a feature... I've run regserv.dll, etc. all to no avail...
I just want WMP to be the default "media" player for all standard file types...
Anyone have any suggestions... ?
Thanks... MTGB

You can try the following suggestions.
Method 1.
1. Control Panel -> Administrative Tools -> Services. Find the Windows Media Player Network Sharing Service, stop it temporarily.
2. Close Windows Media Player 12 if it is started.
3. input %USERPROFILE%\Local Settings\Application Data\Microsoft\Media Player\ to Windows Explorer to find the folder.
4. Move all files in the folder to another place as a backup. Move files in the specific folder will reset database.
5. Restart service and Windows Media Player to check the result.
Method 2.
1. Open command prompt with Admin.
2. In the command prompt type the following command
net localgroup "Administrators" "NT Authority\Local Service" /add
3. Restart the computer to check the result.
Niki Han
TechNet Community Support

Report generation: server execution failed

the app has been running for months. IS dept just upgraded machines and software. NT4.0 is now Win2000 and Office 97 is now Office2000. Report generation tool kit is not happy. Even running NI examples I get error -2146959355 server execution failed in Font Style.vi
Lawrence M. David Jr.
Certified LabVIEW Architect
cell: 516.819.9711
http://www.aleconsultants.com
[email protected]

Searching the Microsoft's web site, I found some info on this error:
If you have never had Norton AntiVirus installed on your computer, follow the following instructions:
1. Open up the specific VI causing Error �2146959355
2. Recompile this VI by pressing the Run arrow while holding down the CTRL and SHIFT keys
3. Go to File � Save All
4. Run the VI
If you are using Norton AntiVirus 2000 with Microsoft Word 2000, follow these instructions:
Note: This information was provided by http://support.microsoft.com. Please use these instructions at your own risk.
1. Select Start � Run
2. If Norton AntiVirus is installed as a stand alone application, type:
regsvr32 -u "c:\program files\norton antivirus\officeav.dll"
If this is successful, you will receive:
DllUnregisterServer in C:\Program Files\Norton AntiVirus\OfficeAV.dll succeeded.
If Norton AntiVirus is installed as a component of SystemWorks, type:
regsvr32 -u "c:\program files\norton systemworks\norton antivirus\officeav.dll"
If this is successful, you will receive:
DllUnregisterServer in C:\Program Files\Norton Systemworks\Norton AntiVirus\OfficeAV.dll succeeded.
3. Click OK
Microsoft notes that in some cases you must rename the oleaut32.dll and reinstall Office 2000. Renaming oleaut32.dll usually requires that you boot your computer in MS-DOS mode.
- Navigate to the directory where oleutt32.dll is located (usually C:\windows\system32) using the cd DOS command.
- Type: rename oleaut32.dll renamed_oleaut32.dll and press Enter
- Reinstall Microsoft Office
Note: This problem seems to still exist with Office 2002.
1. Unfortunately, this is how the activeX works. If Microsoft changes the activeX objects from one Office version to another, the executable built with Office97 will not work with Office2000. You will have to recompile your VI into the executable on a machine with Office2000 and toolkit configured for this version.
2. For the error "server execution failed" with Text Report Example, select File � VI Properties. Select "Execution" from the category box and set the "Preferred Execution" to user interface. This should solve the problem.
Zvezdana S."

What does this mean? Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.

This is the error that we get when we run the Tag File.
ERROR 04/16/2004 02:26:15 PM Server ERROR from Server: National Instruments.OPCLookoutDrivers. Status: -196608, Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.
What does it all mean?

ACRE,
this looks like the Industrial Automation OPC Server (Lookout OPC) is not correctly installed or configured and therefore the DSC Tag Engine - as OPC client - cannot launch the OPC server correctly.
Two checks I have in mind.
- Installation check: Check if the Industrial Automation Server is installed and configured correctly and that you will have a .lpd file as default. Could it be that the .lpd file is corrupted? BTW - what kind of protocol are you using and did you configure aliases for the LPD object? A good resource on checking the configuration might be the online help of Industrial Automation Server (Lookout Protocol Drivers) or the link penDocument>How Do I Configure My Devices with Lookout Protocol Drivers?
- Access rights, COM/DCOM problems: Can you launch the OPC Server with another OPC client? Is your OPC server running locally? If you don't know how to check on this I found a good KB Tools for Troubleshooting OPC Interface Problems E.g. can you access it with Server Explorer?
Last question... did you encounter this problem recently while it was working before? What changes have been done on your system?
Let us know if you have some questions and I hope some of the links help you further troubleshooting this issue.
Roland

Error -2146959355 server execution failed on ActiveX Invoke Node?

I wrote a VI to reload all the module prototypes
of the steps in a TestStand sequence (note: all code modules are
LabView VI's). Whenever it gets to the LabViewModule.LoadPrototype
call, I get a "server execution failed" error (error code -2146959355).
I've tried solutions 1-3 in the following document to no avail:
Why Do I Get Error -2146959355 When Using ActiveX or the Report Generation Toolkit?
http://digital.ni.com/public.nsf/allkb/1c025f018cb5761686256c56007dd258
Any ideas as to what else I can do?
(Incidentally,
if anyone has a clue as to what reference is causing a "References to
PropertyObjects were not released properly" warning dialog... please do
say).
Thanks,
Melissa
(double-posted this to the TestStand forum in case different people read the 2 boards...)
Attachments:
ReloadAllPrototypes.vi ‏104 KB

Hi Melissa,
I think it would be a better option for you to perform this task in TestStand. See the attached example that is tested and works on reloading LabVIEW module prototypes.
Hope this helps!
Best Regards
Jonathan N.
National Instruments
Attachments:
getSequenceFilePath.vi ‏41 KB
reloadLabVIEWPrototypes.seq ‏59 KB

Excel ActiveX: Server Execution Failed Error

I'm using my own ActiveX VIs to control Excel. I take a text file and create a chart from some of the columns, then print the chart. I'm getting a "server execution failed" error when I call PrintOut on the chart object. I understand this error stems from the fact that I'm developing on Excel 2007 and testing on 2003, but upgrading all of the computers that will use this software is not going to happen.
I've fixed all other incompatibilities between versions, and the chart is created correctly, but when the PrintOut method is reached, I get the error. Has anyone ran into this and worked around it? Is my only solution to downgrade my machine to Office 2003?

Here's a few details on that particular error, both of these articles have some workarounds:
Error -2146959355 When Using ActiveX or the Report Generation Toolkit
Error 2146959355 When Running Exe on Machine With Different Version of Office
Tim W.
Applications Engineering
National Instruments
http://www.ni.com/support

No Network - Server Execution failed

I have a laptop connected to my domain runing windows 7. Everything works great until the laptop is no longer connected to my windows domain network. Once the laptop has been disconnected from the domain network i cannot run programs that relie on explorer.exe to run i get Server Execution Failed error. I have tried adding NT AUTHORITY\LOCAL SERVICE to the user group Administrator, this has done nothing.

The problem has to do with having a shell folder (like Documents/Pictures/Music/Videos/etc) mapped to a network location, and that location is (temporarily or permanently) unmapped. For example:
In my environment, I map P: to \\server\users\username so that I can use Group Policy to map their Documents/etc shell folder to P:\Documents (etc).
This usually works GREAT, except that for laptop users that take their computers home and haven't connected to the domain via VPN or other method, the P:\ drive doesn't get mapped when the domain is unavailable at login.
This triggers the error, and the proof is that when I temporarily map the P:\ drive to, let's say, \\computername\c$ the issue immediate goes away.
I view this as a significant bug for corporate users and administrators, because I now have to either wait for a fix before deploying Windows 7 in my environment OR drastically change how my mobile users store their documents so that they're always accessible to them.
I'm in the process this week of evaluating viable work-arounds, so I'll bookmark this and post my findings here in the hopes it will help others.
I've spent quite a bit of time on this and can confirm that it is an issue based on the summary I made above. The issue seems to be that it's annoyed that the user's critical shell folders are unavailable.
The easiest solution is to use Group Policy to redirect any profile folders to UNC paths instead of static mapped drive paths (ie. \\server\share\user\Documents instead of P:\Documents). Then, enable Offline files synchronization if you need the files to be available while the network is not available.

Error - Perl execution failed?

i try to launch broadcaster and get this error
Error - Perl execution failed
Can't call method "state" on an undefined value at /Library/QuickTimeStreaming/AdminHtml/parse_xml.cgi line 1365.
any thoughts on this folks?
10.4.11 latest everything fresh installs etc etc
thanks

Spoke with Apple, this is a bug... and is still present in current builds of OS X Server.

Server Execution Failed

Everytime I open control panel, screen res, personilzation, windows media player, explorer, I get server execution failed explorer.exe I do not want to reset my computer. I am running Windows 8.1 64 bit.

Hi,
Have you make any change to your system before this problem occures?
In my opinion, this problem probably caused by malware, you can try to use AV app scan your system firstly to fix the problem.
Besides this, can you open Event Viewer? If you can, please check if it identify this events and post the detailed information here.
To be simple, you can try to use System restore to revert your system to a former normal time point for test to fix it.
If these method no use, please feel free let me know.
Roger Lu
TechNet Community Support

SSRS Error : Query execution failed for dataset 'dataSet'. (rsErrorExecutingCommand) Semantic query execution failed. Invalid object name 'RPT.*********'. (rsSemanticQueryEngineError)

I am new to SSRS and I am trying to migrate reports from 2008 to 2012. As I have so many reports to migrate, I simply got the back up of ReportServer,
ReportServerTempDB, and Encryption Key and restored them to test environment. I made necessary configuration from RS configuration tool. I am able to see the reports now when I browse //hostname/reports. But when I open any particular report I am getting some
error.
· An error has occurred during report processing.
(rsProcessingAborted)
Query execution       failed for dataset 'dataSet'.
      (rsErrorExecutingCommand
Semantic query        execution failed. Invalid object name
       'RPT. ******'. (rsSemanticQueryEngineError)
****** - I am assuming this is a custom data class.
Does anyone have insight on this? or any better way that I can migrate the reports to new server with less efforts.
I don’t have the reports solution file to deploy the reports, so I have followed backup and restore process.

Hi Kishore237,
According to your description, you migrated some reports from Reporting Services (SSRS) 2008 to 2012. Now you get error when accessing the reports on SSRS 2012. Right?
In this scenario, did you modify the report data source in database after migration? You can try to open the report in Report Builder or Report designer and check the report dataset. If you can preview the report in Report builder or Report designer,
please try to redeploy the report to Report Server. If it is still not working, please try to restore the database from backup. And for migrating reports, please follow the "Content-Only Migration" in the link below:
http://msdn.microsoft.com/en-us/library/ms143724(v=sql.110).aspx
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Schedules Error - Job execution failed because the user who scheduled this

Hi
I wonder if anyone can help
I have a report that I can deliver by email through the BI Publsiher front end without issue. However when I call the report to send by email through my oracle 11G Database, as the same BI User I get the following error message
"oracle.apps.xdo.servlet.scheduler.ProcessingException: Job execution failed because the user who scheduled this job has no more permission or priviledge to run the job."
Any suggestions?
Thanks
Kev

The scheduler appears to be the culprit here so try the following:
1. Open the [repository_home]/Admin/Scheduler/quartz-config.properties file
2. Add the following entry:
org.quartz.threadPool.threadsInheritContextClassLoaderOfInitializingThread=true
3. Restart the environment (xmlpserver)
4. Rerun the report via the scheduler

Windows 7 Media Player - Server execution failed

LOOK... I've tried "1. Click Start Button, type "cmd" in the search bar. The CMD icon will appear in the Start Menu."
"2. Right click the CMD icon and click "Run as administrator". Yeah right, The window that opened is a "User Account Control". It reads; Do
you want to allow the following program to make changes to to this computer?"
3. In the popup window, type the following command line and press Enter. There is NO PLACE TO TYPE ANYTHING IN. See Step 2.
I have a lot of Legal Video Evidence in/on this Computer... I can't afford to lose ANY of it.
I know it's going to take days to get an answer.

Log in as the Administrator.
Close Windows Media Player.
In the Start Search box type in:
services.msc and hit the Enter Key.
Scroll down to Windows Media Player Network Sharing Service (WMPNetworkSvc).
Click on Log On tab.
Change the log on to Local System account.
Click OK/Apply.
Now recheck the issue.
S.Sengupta, Windows Entertainment and Connected Home MVP

"server connect failed" error - CIT 400

Would appreciate some help with this one:
My CIT 400 handset does not seem to be able to connect to the base station. I get the error "server connect failed" when I try to sign in to Skype. No blue light flashing on the base station(during sign in or otherwise) either. Have tried resetting the base, resetting the handset, but no luck ...although the blue light on the base does flash once when it is reset. Any pointers please?

Hi! do you have a PSTN line or landline plug-in to the device? Can you receive landline calls from CIT400? You may also try to access the setup page for the device and check the skype configuration. Just enter the IP address of the device on your browser and use admin for the username an password. Check on the Skype page the status of your account. You may try different Skype account to check if it will work.

Backup Error "Server execution failed (0x80080005)"

Similar Messages

Maybe you are looking for