Backup everything except the system tablespace
Is there a way to backup everything except the system tablespace without having to specify every individual tablespace?
version is 10.1.0.5 on HP-UX itanium.
The reason for this is the database was upgraded from 7.3.4->8i->10.1.0.5 and we are now migrating to using RMAN instead of user managed backups however we have encountered a bug when backing up index blocks in the system tablesapce this only impacts compressed backupsets so If I can exlude the system tablespace I can run two backups one uncompressed that captures the system tablespace then another that captures everything else. I'd really like to avoid specifying the tablespaces in a script as it then introduces the possibility that a new tablespace is added and isn't included in the backups.
Unfortunatly this database is used by a third party application and the aplpication vendor only supports 10.1.0.5 at the moment, plans are to upgrade next year and tidy up the number of tablespaces at the same time.
looks like I'll have to backup the system tablespace uncompressed and then all the other tablespaces as a compressed backupset and setup an alert on files not backed up.
Similar Messages
-
Why the system tablespace increase a lot?
I have noticed that the system tablespace of my prod Oracle 10g R2 on AIX 5.3L reaches over the 85% warning level now, and the size has increased from ~68% to 88% of 1.6G total assigned capacity during the last 7 months. How do i find out what reason causes the increase? can I remove some "fat" out of them? or just keep increasing the size? My fresh backup AIX 5.3L system with the same 10g R2 only takes 38% of 1.6 G.
SEGMENT_NAME SEGMENT_TYPE MBYTES
SYS_LOB0000125172C00039$$ LOBSEGMENT 152
C_OBJ#_INTCOL# CLUSTER 136
I_CON1 INDEX 104
C_OBJ# CLUSTER 96
C_COBJ# CLUSTER 88
HIST_HEAD$ TABLE 57
CON$ TABLE 41
I_COL1 INDEX 41
C_FILE#_BLOCK# CLUSTER 38
I_HH_OBJ#_COL# INDEX 34
I_HH_OBJ#_INTCOL# INDEX 34
SOURCE$ TABLE 32
I_CON2 INDEX 27
IDL_UB1$ TABLE 26
I_CDEF4 INDEX 26
I_H_OBJ#_COL# INDEX 25
I_COL2 INDEX 20
OBJ$ TABLE 19
I_COL3 INDEX 19
I_CCOL1 INDEX 19
I saw some LOB segments in SYS; however my fresh new 10g R2 (v SE) on other AIX machine does not list those. Where are they from?
I checked the user_lobs, Here are the tables which has LOB seg stored the system tablespace
AW_OBJ$
VIEWCON$
SNAP$
SNAP$
TABPART$
INDPART$
TABSUBPART$
INDSUBPART$
TABCOMPART$
INDCOMPART$
DEFSUBPART$
KOTTD$
KOTTB$
KOTAD$
KOTMD$
KOTTBX$
KOTADX$
SUM$
SUM$
SQL$TEXT
METASTYLESHEET
EXTERNAL_TAB$
EXTERNAL_TAB$
JIREFRESHSQL$
AUD$
AUD$
FGA_LOG$
FGA_LOG$
PS$
STREAMS$_DEF_PROC
STREAMS$_DEF_PROC
STREAMS$_DEF_PROC
REDEF_DEP_ERROR$
NCOMP_DLL$
EXPIMP_TTS_CT$
ATTRIBUTE_TRANSFORMATIONS$
RULE$
RULE$
REG$
AQ_EVENT_TABLE
AQ_SRVNTFN_TABLE
AQ_SRVNTFN_TABLE
SCHEDULER$_JOBQTAB
SCHEDULER$_JOBQTAB
SCHEDULER$_JOB_ARGUMENT
SCHEDULER$_PROGRAM_ARGUMENT
SCHEDULER$_EVENT_QTAB
KUPC$DATAPUMP_QUETAB
KUPC$DATAPUMP_QUETAB
KUPC$DATAPUMP_QUETAB
KUPC$DATAPUMP_QUETAB
KUPC$DATAPUMP_QUETAB
KUPC$DATAPUMP_QUETAB
KUPC$DATAPUMP_QUETAB
STREAMS$_INTERNAL_TRANSFORM
AQ$_MEM_MC
AQ$_MEM_MC
AQ$_KUPC$DATAPUMP_QUETAB_P
AQ$_KUPC$DATAPUMP_QUETAB_P
AQ$_KUPC$DATAPUMP_QUETAB_P
AQ$_KUPC$DATAPUMP_QUETAB_P
AQ$_KUPC$DATAPUMP_QUETAB_P
AQ$_KUPC$DATAPUMP_QUETAB_P
AQ$_KUPC$DATAPUMP_QUETAB_P
AQ$_KUPC$DATAPUMP_QUETAB_D
SYS_EXPORT_FULL_01
SYS_EXPORT_FULL_02
Does not look like any non-system user here?
Message was edited by:
user508054 -
[Solved] Updating everything except the Linux kernel
Hello,
Since a few weeks, wicd has problems with recent versions of kernel on my computer. Is there a way to update everything except the linux package?
Thanks in advance.
Last edited by Marin M. (2012-05-02 14:20:52)You can hold any package from updating by uncommenting the IgnorePkg option on your pacman.conf and listing said package(s) there.
https://wiki.archlinux.org/index.php/Pa … g_upgraded -
InterMedia leaves garbage in the system tablespace
During the creation of a context(interMedia) index, I shutdown
the Oracle server with abort. I started the server up and
proceeded to delete the bad index. When I tried to create a new
index with the same name an error occured. I looked in some
tables in the system tablespace under the ctxsys user, and found
references to my corrupted index. Is there a way to clear out
this bad data w/o having to re-install Oracle?You don't say what the error is so I can't be sure, but I
suspect that deleting the entry in dr$index (owned by ctxsys)
for your 'bad' index will allow you to recreate it. -
How to make everything except the finder disappear?
I'd like to press one key on my keyboard and have everything but the finder get hidden. Any way to do that?
Hi there,
Not exactly 'one key' as requested, but if you hold the Cmd and Option keys and click on an application window, it will hide everything except that application. You can exploit this behaviour for your needs by cmdoptclicking on any part of your Desktop. This will hide everything except the Finder.
Yang -
Installing 11g middleware on Win2003 server. During Application Configuration portion the install fails in the Deploying Enterprise Manager step. Error log shows 'oracle.as.provisioning.exception.ASProvWorkflowException: The system cannot find the path specified'. I've pointed the environment variables to a temp directory that does not have spaces in the name (c:\TEMP) and placed the installation files in directories that do not have spaces. I can't tell what directory it can not find. Any ideas?
Adding Templates.
DEBUG : Checking if Templates are Already Applied.
DEBUG : Checking Template : C:/bea/oracle_common/common/templates/applications/oracle.em_11_1_1_0_0_template.jar
DEBUG : domain-info.xml location : C:/bea/user_projects/domains/ClassicDomain/init-info/domain-info.xml
DEBUG : Reading Template to be applied : C:/bea/oracle_common/common/templates/applications/oracle.em_11_1_1_0_0_template.jar
DEBUG : Name of the template : Oracle Enterprise Manager
DEBUG : Version of the template : 11.1.1.0
DEBUG : Reading domain-info.xml. Checking templates already applied.
C:/bea/oracle_common/common/templates/applications/oracle.em_11_1_1_0_0_template.jar
oracle.as.provisioning.exception.ASProvWorkflowException: The system cannot find the path specified.
The system cannot find the path specified.
at oracle.as.provisioning.weblogic.ASDomain._addTemplate(ASDomain.java:4176)
at oracle.as.provisioning.weblogic.ASDomain.addTemplate(ASDomain.java:3973)
at oracle.as.provisioning.engine.WorkFlowExecutor._addTemplates(WorkFlowExecutor.java:1398)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:475)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: The system cannot find the path specified.
The system cannot find the path specified.
at oracle.as.provisioning.weblogic.ASDomain._addTemplate(ASDomain.java:4176)
at oracle.as.provisioning.weblogic.ASDomain.addTemplate(ASDomain.java:3973)
at oracle.as.provisioning.engine.WorkFlowExecutor._addTemplates(WorkFlowExecutor.java:1398)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:475)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 13 more
progress in calculate progress3
progress in calculate progress3I unistalled everything and started over and eliminated Enterprise Manager from the list. Now it cancels at the Application Configuration step in Applying Oracle JRF Template with the same error. Cannot find path specified.
Does anyone have any idea what path it could be looking for? I can't tell where else to look.
Extending Domainwith JRF
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.JRFApplicationTask.execute(JRFApplicationTask.java:78)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: The system cannot find the path specified.
The system cannot find the path specified.
at oracle.as.provisioning.weblogic.ASDomain._extendDomainWithJRFTemplate(ASDomain.java:3955)
at oracle.as.provisioning.weblogic.ASDomain.extendDomainWithJRFTemplate(ASDomain.java:3762)
at oracle.as.provisioning.engine.WorkFlowExecutor._extendDomainWithJRF(WorkFlowExecutor.java:1413)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:437)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 more
progress in calculate progress4
progress in calculate progress4 -
Restored system from Time Machine backup disk but the system could not start-up
On MacBook Pro early 2008, restored the entire system from Time Machine backup disk to the entire disk.
The previous system on the backup disk had FileVault turned on.
The restore completed successfully and I was prompted to restart the system via the new restored system disk.
I heard the normal start-up sound, then the Apple logo, but it stuck at the logo screen. And the cooling fan run at almost full speed?
I have been waiting for a few hours, guessing it might FileVault the disk.
Finally I have to shutdown the machine as it stuck at the logo screen forever.
Anyone has the same issue? Any ideas?BTW, I also tried Repair the system disk, Fix permissions via Disk Utility.
I guess I must lose some files either during the backup or the restore. -
Symptom One
You attempt to
schedule a backup every day via Windows Server Backup on Windows Server 2008 R2. At the beginning, the backup works without issue. But after a few days it failed and you receive the error “Windows Server Backup:
The system cannot find the path specified.”
Cause
The issue may occur if there is
no shadow copy storage space available on the backup volume.
Verify
You can use the List ShadowStorage command to check if you have enough storage space to store the newly created shadow copy. If you've reviewed the size of the backup snapshot and discovered
that there is no allocated space for the storage association, you need to resize shadowstorage.
Solution
You could run the command below to create shadow copy storage space on the backup volume:
vssadmin resize
shadowstorage /for=<ForVolumeSpec> /on=<OnVolumeSpec> [/maxsize=<MaxSizeSpec>]
More Information
Vssadmin resize shadowstorage
http://technet.microsoft.com/en-us/library/cc788050.aspx
Symptom Two
When you add
another external hard drive to backup schedule via Windows Server Backup on Windows Server 2012, it fails and you receive the error “The System cannot find the path specified.”
Cause
The issue is due to the
Original Destination Disk was not attached to the server.
Verify
You could check the disk status in Disk Management to see if the Original Destination Disk is offline or removed.
Solution
You need to attach
Original Destination Disk to the Server then choose another external hard drive as backup target. After that, you could remove the Original Destination Disk.
Workaround
To work around this issue, please use the WBADMIN command line tool to add disk.
WBADMIN ENABLE BACKUP -addtarget :{ DiskID}
The AddTarget parameter takes disk ID as parameter. It can be retrieved by running "WBADMIN GET DISKS" command.
Example:
WBADMIN ENABLE BACKUP
-addtarget :{ aa123d14-bba0-1dd9-0d93-80aaaa6bbb63}
More Information
Wbadmin enable backup
http://technet.microsoft.com/en-us/library/cc742130.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.good
-
MSI R6850-PM2DAGD5/OC everything EXCEPT the Driver installs
Multiple installations of the latest Windows 7 64 bit driver from the AMD site, the MSI site, and using "Update Driver" button from Device manager, as well as an attempted installation of previous versions of the same driver from the AMD site produce the same result:
ATI install manager finishes with errors, showing that the driver installation failed. I've unistalled, run driver cleaner, rebooted to safe mode, run driver cleaner again, rebooted and ran a fresh install with the same result. Everything in the Catalyst suite EXCEPT the driver installs.
Device manager accurately labels the card as AMD Radeon HD 6800 series, but on the properties tab shows (Driver Date: 4/19/2011, Driver Version 8.850.0.0) shows "Windows has stopped this device because it has reported problems. (Code 43)"
On reboot, a dialog box pops up reading:
"No AMD graphics driver is installed, or the AMD driver is not functioning properly. Please install the AMD driver appropriate for your AMD hardware."
Any guidance or is this and RMA situation? I can't get this card to perform correctly at all, and I know the slot is fine because I have a Gigabyte 6850 that I can install and uninstall at will.I took the card over to a buddies house and tested it on his two Windows 7 rigs (listed below). He ran the driver packages and then performed the windows 7 performance testing and after about a minute, the screen turned off and a "no signal" message appeared. We repeated the cycle (restarted, reload drivers, reran Win7 test) and the same thing happened again. Another thing we noticed is that Everest wouldn't detect the card.
So, on my machine, Windows device manager shows the card as a 6800 series card with and error exclamation point/triangle next to it, and shows in properties tab that Windows has stopped the driver/service because there is an error with the device. On his machines, Everest doesn't dectect the card and the card stops working consistently.
My Machine:
motherboard: Biostar TP67B+
memory: Patriot DDR3 1333 2x4GB
PSU: Power & Cooling 750W
CPU: 15 2600K stock
OS: Windows 7 SP1
Samsung monitor
Machine A:
motherboard: Gigabyte GA-P43-ES3G
memory: Kingston DDR2 800 2x2GB
PSU: FSP- SPI-600
CPU: Q9950
OS: Windows 7 SP1
ViewSonic monitor
Machine B:
motherboard: ASUS P8h61
memory: Kingston DDR33 1333 2x2GB
PSU: TA-K1 500w
CPU: i5 2300 (Stock)
OS: Windows 7 SP1
Samsung Monitor -
How to shrink the system tablespace datafile Size
iam using oracle 9i R2 and i want to reduce my datafile size but it's show's that error when i try to resize it. ORA-03297
Hi,
We can directly resize datafilesTEST.SQL>SELECT FILE_NAME, BYTES FROM DBA_DATA_FILES WHERE TABLESPACE_NAME='SYSTEM';
FILE_NAME
BYTES
/.../dbsGNX.dbf
419430400
TEST.SQL>ALTER DATABASE DATAFILE '/.../dbsGNX.dbf' RESIZE 390M;
Database altered.
TEST.SQL>SELECT FILE_NAME, BYTES FROM DBA_DATA_FILES WHERE TABLESPACE_NAME='SYSTEM';
FILE_NAME
BYTES
/.../dbsGNX.dbf
408944640But the minimum file size is the size of the extend the furthest in the datafile:TEST.SQL>SELECT FILE_ID,FILE_NAME FROM DBA_DATA_FILES WHERE TABLESPACE_NAME='SYSTEM';
FILE_ID
FILE_NAME
1
/.../dbsGNX.dbf
TEST.SQL>SELECT MAX(BLOCK_ID) MBID FROM DBA_EXTENTS WHERE FILE_ID=1;
MBID
25129
TEST.SQL>SELECT SEGMENT_NAME,OWNER,SEGMENT_TYPE FROM DBA_EXTENTS WHERE FILE_ID=1 AND BLOCK_ID=25129;
SEGMENT_NAME OWNER SEGMENT_TYPE
I_OBJAUTH2 SYS INDEX
TEST.SQL>SHOW PARAMETER BLOCK_SIZE
NAME TYPE VALUE
db_block_size integer 8192
TEST.SQL>SELECT 8192*25129 FROM DUAL;
8192*25129
205856768about 200M.
Regards,
Yoann. -
[KIND OF SOLVED]Updating everything except the kerne
Hey all,
Recently, I updated my system and it automatically updated the kernel to 3.7 (as i remember) but the wifi adapter stopped working. In previous kernel i used the following driver and "modprobe wl" to make the wifi work: Driver. After I updated, modprobe wl didn't work, so I installed the previous kernel. I have 2 questions:
1. How can i make my wifi work?
or if it is not possible... 2. How can I update my system WITHOUT installing the new kernel?
Thanks in advance.
Last edited by khajvah (2013-01-10 15:20:03)The file /etc/pacman.conf has IgnorePkg and IgnoreGrp settings. You can list the unwanted updates here. Though keep in mind that partial updates are not supported. Also, if you are ignoring something as crucial as the kernel, there are other packages that may depend on the updated kernel. For instance, things like kernel modules will likely be broken, especially between version bumps like 3.6 -> 3.7.
I think in your case though, you are trying to use a kernel module that you had to compile yourself against your kernel. So now that you are updating from 3.6 to 3.7 you now only have a module that is built against 3.6. I think rebuilding the module against the new kernel is going to be not straight forward unless you are comfortable editing a pkgbuild (which isn't that hard btw).
Edit: nevermind, this pkgbuild relies of a prebuilt module from a debian package. You aren't "building" anything form this package. Sorry dude...
Last edited by WonderWoofy (2013-01-10 15:52:16) -
I Updated to ios 8 yesterday and I had backed up everything to icloud before . I am having difficulty retrieving the songs I created in GarageBand .. Any suggestions on how I could get them back?
I had back up my iPad in icloud the day before I decided to to upgrade ...I did as you said .. I settings > garage band but I don't see anywhere to enable iCloud here is a screen shot of my ipad h
-
FORGOTEEN......... VERY SORRY ABOUT IT BECAUSE THE NEW iPad is BEYOND FROM MY ANY EXPECTATIONS......... IT IS THE FIRST TIME I TRY (USE) AN APPLE PRODUCT............ I AM REALLY VERY IMPRESSED FROM THAT UNIMAGINABLE PRODUCT!!! APART THE TWO MENTIONED PROBLEMS (EVERYTHIN NEW TAKES TIME TO BE LEARNT) IT IS REALLY THE MOST PERFECT WEB TOOL I HAVE EVER USED SO FAR (I DO NOT WORK FOR THE APPLE AND I AM NOT PAID FOR A RELEVANT ADVERTISMENT, NEITHER) - PLEASE SHOW ME IN A SIMPLE WAY (I AM NOT FAMILIAR WITH THOSE MACHINES BUT THEY ARE VERY USEFULL TO ALL OF US NOWADAYS), HOW TO POST DIRECTLY AN IMAGE FROM MY NEW ipad to FaceBook and the second one, in which way I CAN COPY - SYNC MY HD PHOTOS TO MY NEW ipad (I DID SO WITH MY ALL MY EMAIL ADDRESSES/CONSTACTS FROM THE MS OUTLOOK TO MY NEW iPAD DIRECTLY. I HOPE THERE WILL BE NO PROBLEMS - DIFFICULTIES TO PLACE VIDEOS DIRECTLY FROM MY NEW ipad to BOTH FACEBOOK AND YOUTUBE, THANS FOR YOUR UNDERSTANDING AND YOUR EFFORTS TO HELP ME, GREETING TO ALL OF YOUR FROM ATHENS, GREECE, ENJOY WITH THE NEW ipad, IT IS A FANSTASTIC WEB ETC TOOL
CONSTANTINOS SPYROPOULOS
ATHENS, GREECEHave you read my reply to your other thread : https://discussions.apple.com/message/18373620#18373620 ?
For Facebook try one of the facebook apps e.g. the 'official' Facebook app
To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes, and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page : http://support.apple.com/kb/HT4236 . You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - not including photos in a subsequent sync is how you delete them from the iPad.
(And don't type in capitals, it is considered SHOUTING so people are less likely to reply, and it makes it harder to read) -
Everything EXCEPT the text on my page scales, help?
I have a page with several images and text and all are set to % values so the page can scale with the browser. Yet for some reason only the images scale. What am I doing wrong?
P.S. I'm relatively new to the field if this is a silly question.Put this code in your Stage compositionReady and you will be sorted!
$(document).ready(function() {
fontSize();
$(window).resize(function() {
fontSize();
function fontSize() {
$ww = $(window).width();
$fontSize = ($ww / 25) + 'pt';
$('body').css("font-size", $fontSize); -
Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003
I'm having severe problems backing up my own machine to a share on our
FILE-SERVER as \\FILE-SERVER\Backup\
I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
FILE-SERVER or the Backup settings. It has to be something to do with what I'm trying to backup from my machine.
First some background.
This exercise all began when the Windows Server 2008 r2
O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
In the end I renamed the Server from FILESERVER
to FILE-SERVER.
We routinely share four folders on what is now
FILE-SERVER:
\\FILE-SERVER\Backup
- a Folder where backups from all other machines are written, so that they will be backed up with the Server
\\FILE-SERVER\Company
- holds all our Company data
\\FILE-SERVER\GEM
- this is the application folder for our own database
\\FILE-SERVER\Install
- holds all Install files for the software we use
These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
Prior to the Server falling over, I had Backup working fine on my machine.
On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
of course shared as \\FILESERVER\... not \\FILE-SERVER\...
Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
I started with a Desktop, which of course did not have any Offline Files.
That proved relatively straight-forward.
I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
had worked OK on the desktop machine. But when I ran the backup I got:
The System cannot find the path specified, Error Code 0x80070003
I tried all sorts of things to get it to work:
I restored the system to the earliest point possible,
I ran chkdsk,
I defragged the drive
All to no avail, so I tried backing up:
with and without a system image,
reducing the backup to a single folder,
a single Folder with only one .txt file in it,
making the Folders 'Available Offline' again.
Nothing made any difference.
In the end I looked in the Sync Center to look at the Offline Files Folder.
Under Mapped Network Drives I discovered I still had the Files and Folders from
\\FILESERVER. In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
So I bit the bullet and re-installed my Notebook too. This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
I’ve been through all the troubleshooting procedures in:
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Method 1
It had none of the symptoms reported in
http://support.microsoft.com/kb/973455
but I scanned for ‘reparse’ points anyway. Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
Method 2
Check a drive for errors.
Looked at:
http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
Checked
both boxes. I closed machine down, to check for errors when it re-started.
It didn’t seem to find anything.
I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally.
It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier.
Method 3
Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event.
So I’m not sure what’s going on.
HELP - I'm out of ideas!
I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
I cannot find a way of uploading it.I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks.
Maybe you are looking for
-
Hi All, I have problem to convert word document in to html (Office 2007) Interop Assembly appear to work but powershell returns: Unable to find type [Microsoft.Office.Interop.Word.WdSaveFormat]: I'using : $saveFormat = [Enum]::Parse([Microsoft.Offi
-
Manager information from SAP HR
How can I get information about the manager for employee from SAP HR?
-
How can i add an actionlistener to a JButton?
I tried b1.addActionListener()But I need to put something in the brackets. To which class does add ActionListener belong?
-
Hi, experts I would like to know how to deal with over delivery to customer in sap as standard process?
-
Search Page with TopLink + ADF Faces
Hi, I develop a project with JDeveloper 10.1.3.1.0.3984 using Toplink and ADF Faces. I test with the embedded OC4J Server. I must search in a table with 100 000 rows. I follow the tutorial ADF Faces (Chapter 7) : http://www.oracle.com/technology/obe/