Backup exchange - storage snapshot along with tradissional backup

Hi all
exchange 2010 (DAG)
up untill now it was backedup with netapp snapmanager (and net backup was backing up thoth snapshots to disc by NDMP)
now we replaces our storage to HP 3par.
we would like to deploy 3par snapshot for exchange but there is no option to backup the snapshot with net backup (as we did with netapp).
is it OK to backup the exchange DB with both snapshot fo exchange and both net backup? is there going to be issue with the logs trunck from bothe of the backup applications? or with the VSS?
I am conceder with the same issue for uor SQL DB backup

Hi
Are you taking snapshots of the actual virtual/physical machine for the exchange server? Snapshotting a machine is not supported on exchange.
Exchange logs will need to be truncated after each backup or you going to first run out of space and secondly if you run into a problem you will need to replay log files.

Similar Messages

  • OIM and Exchange Auto Provision along with AD

    Hi,
    How can I configure an AD connector in OIM to automatically provision an Exchange account for a user?
    At present as part of manual provisioning test, I have to assign the AD User resource and Exchange resource separately to provision a user with AD and Exchange accounts. Is there a simplest way to do it?
    Please advise. Also please share if any documentation available.
    Thank you!

    Policy based provisioning should work fine for you.
    Alternatively you can use an entity adapter or a combination of entity adapter and a policy.
    Policy based provisioning is described in 11 Creating and Managing Access Policies in Identity Manager Administrative and User Console Guide (assuming that you are using 9.1).
    Good luck
    /M

  • Exchange 2013 issues along with toolbox and exchange powershell

    I have a server 2012 with exchange 2013, no errors on install, we have about 50 user mailboxes setup. about 3-5 times a day sending and receiving will stop working, we have to reboot about 3 or 4 times then it starts working again. 
    Also the Exchange power shell doesnt work, we get :
    VERBOSE: Connecting to NVSVMSX.KATV.local.
    New-PSSession : [nvsvmsx.katv.local] Processing data from remote server nvsvmsx.katv.local failed with the following
    error message: [ClientAccessServer=NVSVMSX,BackEndServer=nvsvmsx.katv.local,RequestId=3c4178cd-3e21-4ebf-9c65-23e5855cf
    17f,TimeStamp=11/11/2014 6:53:03 PM]
    [AuthZRequestId=b12c2ecf-ff1f-42df-b0f8-441878180bfa][FailureCategory=AuthZ-CmdletAccessDeniedException] The user
    "KATV.local/Computers/NVSVMSX" isn't assigned to any management roles. For more information, see the
    about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : IncorrectProtocolVersion,PSSessionOpenFailed
    we get that 3 times then nothing.
    Also on the Toolbox we get MMC error
    "Type is not resolved for member "Microsoft.Exchange.Configuration...."
    Please help, we are at a loss and not sure what to do at this point, we have looked every where for a permissions issue and have found nothing so far.
    thank you
    BD

    Hi,
    Please check if this user was in Organization Management Group. If not, please use the following cmdlet to add this user to this group.
    Add-RoleGroupMember “OrganizationManagement” -Member <member>
    If this issue still exists, Run Setup /PrepareSchema and Setup /PrepareAD again.
    In addition, please refer to this similar thread
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/33038c63-a993-4032-9355-023ae91a1c6a/cant-access-ecp-after-install?forum=exchangesvrdeploy
    And hope KB 2898571 will be helpful for you.
    To solve ToolBox issue, please try to install or uninstall ASP.NET 4.5 on Windows 8 or Windows Server 2012, use one of the following options:
    Run the following command from an administrative command prompt: dism /online /enable-feature /featurename:IIS-ASPNET45
    For Windows 8 client computers, turn on "IIS-ASPNET45" in "Turn Windows Features On/Off" under "Internet Information Services-> World Wide Web Services -> Application Development Features -> ASP.NET 4.5".
    For Windows Server 2012 computers, enable "IIS-ASPNET45" using Server Manager, under "Web Server (IIS) -> Web Server ->Application Development -> ASP.NET 4.5".
    Refer from
    http://support.microsoft.com/kb/2736284
    Best Regards.

  • Microsoft Exchange drastically failed along with 123 OST database

    Hey fellos,
    We are facing 2013 Microsoft Exchange and recently faced HYBRID CONFIGURATION WIZARD ERROR. Try to fix with full efforts but failed. 
    Is there any way to save very dear 123 ______.OST files and these are huge in SIZE..! (Exchange orphaned offline database).
    My Gratitude.

    Hi Lucina，
    Since your issue is related to Exchange server and OST database, our help might be limited.
    Regarding to your issue, we suggest you post your issue to TechNet Exchange because you might get more helpful advices there.
    https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
    Thanks for your cooperation and understanding.
    Regards,
    D. Wu

  • Storage unit labels along with pallet labels in wm

    Hello,
    could you please explain how to generate storage unit label along with pallet label in wm. for example if 1pallet contains 4 boxes and each box will have20 bottles then we need to print pallet label for 4boxes and unit label for each box with 20 bottles information.
    Thanks
    Regards,
    Pavan Kumar

    Hi Pavan,
    Based on your requirement and as far as standard SAP are concern there is no form which will help to generate the label in the above format. You need to take the help from development team who can design the format using SMARTFORM functionality as per your requirement. once the form is ready you can assign the print code and the SU lable form to below mentioned node. which will print the label on the printer specified
    SPRO ---LE---WM ---Storage unit ---Define print control
    additionally have a look on the below mentioned SAP standard link which will give you an idea about the printing of SU
    Printing SU Documents Manually - Warehouse Management System (WMS) - SAP Library
    Let me know if you need any further information

  • When I set up my exchange account on iPad2 cameras always become disabled. What's the problem, can I use my cams along with using exchange mail?

    Can someone help me with this question? Why iPad 2 disables camera when I set up my Exchange mail account? How can I enable camera along with using mail?

    The iPad is not disabling the camera - the administrator for your Exchange account is. You need to go to the person who administers your Exchange account and ask them to lift the restriction on cameras in their Exchange system.

  • I updates my iPad with the latest iOS and despite backing up all the information prior, my iBooks application was deleted along with a hundred important PDFs on it. Is it possible to locate these missing files? Urgently requires assistance. Thank you!

    I updated my iPad with the latest iOS and despite backing up all the information prior via iTunes, my iBooks application was deleted along with a hundred important PDFs on it. Is it possible to locate these missing files? Urgently require assistance. Thank you!

    Hi Sam,
    I understand where you are about being your own IT department, it can be overwhelming ...
    What drives to buy depends an awful lot on how you will use them, what your budget is, and your preferences.
    In the case of your DP Powermac, for online storage used primarily for editing, I would add one or more internal drives first. Look for drives that are at least 7200rpm and have at least an 8MB cache. 10,000rpm/16MB cache is even better, but more expensive. Seagate Barracudas have always been good choices.
    For backup purposes, I'd pick some good external FireWire drives; you can also use these for online editing, lots of people do. Your Mac has both FW400 and FW800 ports - either kind is fine but if you get drives that support both, you would want to connect them to the FW800 port for the added performance.
    In my experience, the Lacie d2 Extreme drives have been very very good. In fact I have 3 of them daisy-chained off my iMac G5 right now and they work flawlessly with FCE. Weibetech and Granite Digital drives are further upscale in performance and price. RAID configurations would be even further upscale. Do stay away from consumer level hard drives, however ... the Western Digital MyBook series & no-name drives come to mind ...
    Don't use a FireWire hub for your external drives, it's just asking for trouble.
    ps. And thanks for your nice comment about me. I'm happy to help, as are other folk in the forum.

  • Exchange 2007 - Corrupted disk with lof files

    I have
    Exchange 2007, where the logs are stored on the fiber chanel storage. The storage
    has been damaged and I don't have access to the logs. When I
    try to mount database I get the message ""unable to mount database. (hr=0x80004005,ec=-1023)". How to mount
    Exchange storage seting logs to difrent location?

    Hi ,
    I agree with Gulab Prasad .
    First of all Just run the below mentioned command for the affected database to check the database is in clean shutdown or else in a dirty shutdown state.
    eseutil /mh "path of the edb file "
    If it is in a clean shutdown then you can mount the database .Before that we need to change the storage log file location to different path by using the below mentioned
    command then only new log files will get generated on the new location after the database is mounted.
    Move-StorageGroupPath -Identity "MyStorageGroup" -LogFolderPath "D:\MyNewLogFolder"
    In case if it in the dirty shutdown state then definitely there would be some logs required to mount the database .In case if you have those logs then you can do an
    soft recovery to get back the database to the clean shutdown state and then mount the database.
    In case if you don't have those logs , then as gulab prasad said we do have two options
    1.Hard repair 
    eseutil /p "path of the affected database"
    On the above process there would be some possibilities for the data loss.
    2.Second option would be restore the database file and its respective log files from last successful backup.
    As an additional info to avoid the downtime you can have the dial tone database .Then by using the RSG
    in exchange 2007 we cannot restore the mailboxes data's to the original mailboxes.
    Thanks & Regards S.Nithyanandham

  • I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

    I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

    Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

  • I updated my iPod Touch to 6.0.1. after much prompting. Now my music is gone! (along with apps, photos and podcasts). After syncing a bunch of times some of it came back, but not all of it. How odd is that? How can I get my music back on it??

    I updated my iPod Touch to 6.0.1. -- after much prompting from iTunes. Now my music is GONE (along with apps, photos and podcasts). After syncing a bunch of times some of it came back, but not all of it. How odd is that? How can I get my music back?? I'm really bummed! Everything shows in iTunes, but it's not synching right. So glad I updated. NOT.

    Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
    When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
    Therefore, remembe the passcode that you enter this time.
    It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup.

  • When they un-upgrade iPhoto email templates? Along with Apple Maps, another software I won't use anymore.

    When they un-upgrade iPhoto email templates? Along with Apple Maps, another software I won't use anymore.

    You can go back by restoreing your backup of the iPhoto library from the previous version a installing the previous version for its original source
    Of course I use iPhoto - and I have not idea what
    Do you use iPhoto? What version are you using and have you sent photos using it from the iPhoto and used the older templates?
    means
    one last time if you want help you have to start by being percise and shaing information - for example "older version" is of no help since there are 40 or 50 older versions
    again
    Sorry but if you have a question then you need to provide information  - what are you talking about? What version of iPhoto and what OS version do you have? What upgrade are you talking about? what e-mail client are you using?
    LN

  • When I click on the iPhoto a gray appears along with the perpetual wheel but does not load.   Any recommendations?

    When I click on the iPhoto a gray appears along with the perpetual wheel but does not load.   Any recommendations?

    Assuming you're using iPhoto 09 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • After 3 years of use, my I-photo dissappeared from my mac along with all my pictures.  Stupid me has no back up either.  any ideas how I can get my pictures back?es bautupi

    Happy Holidays.  After 3 years of use, my I-Photo disappeared from my Mac along with all my pictures.  And stupid me has no back-up.  Any ideas on how I can find my pictures?  Thanks.

    Happy Holidays to you too.
    What exactly is missing?
    The iPhoto icon in the Dock, that you used to launch iPhoto?
    The iPhoto application from the "Applications" folder?
    Your iPhoto library from your "Pictures" folder?
    To check what is still left, click on the looking glass icon in the upper right corner of your screen and type "iPhoto" into the Spotlight search field. This should find anything with iPhoto in its name. Does it show an iPhoto application? Then click it to launch it.
    But before you do anything else, I'd strongly suggest to get yourself a backup disk and make a Time Machine backup of your machine right now. You have already noticed, how risky it is, not to have a working  backup. The best computer will crash one day.
    Regards
    Léonie

  • How export one table along with daya from one location to other location

    Hi All,
    I'm new in export/import practice.
    Can anyone plz tell the steps along with commands to do the following:
    1. I want to export a table with data from one location(computer) to other(computer) that are in same network.
    2.Also from one user to another user.
    I'm using oracle 10g.
    regards
    Sonia

    Wrong forum. This is a database query not an Oracle Secure Backup issue.
    Thanks
    Rich

  • Migrate SQL 2008 Analysis database to 2012 AS database along with data level security defined in current production cube

    I want to migrate Analysis Services 2008 database to 2012 AS database along with data level security defined in current production cube
    Note: Only Production environment have security, while no security is defined in development environment
    Potential Approach:
    1 - Using Synchronization Wizard: Gives me error : "The OLAP element at line1 can not appear under envelope......" and this is because Synchrinzation works only for same version
    and in my case, there are different versions of SQL (SQL 2008 and 2012)
    2 - Using Visual studio conversion wizard - Convert SQL 2008 AS project to 2012 and then process cube, so I can get the cube working but then how can I get data level security since 100's of data level security is defined in production Cube, so how can I
    migrate that across
    3 - Script out XMLA and deploy cube - But then again having issues with how can i script SSAS security
    4 - Would taking backup of SSAS 2008 database and restore to SSAS 2012 will help ?
    Any suggestions would be appreciated
    Thanks,
    Mihir

    Hi Mihir,
    According to your description, you want to migrate the SQL Server Analysis Services (SSAS) 2008 database which have some security setting with it to SSAS 2012, right? We can migrate existing Analysis Services databases either during Setup, by upgrading an
    existing instance of Analysis Services, or after Setup, by running the Migration Wizard. Generally, when migrating a database to another server, all the setting will be migrated. So in your scenario, you can refer to the steps on the links below to migrate
    your SSAS database.
    How to: Migrate Analysis Services Databases
    Migrating Existing Analysis Services Databases
    Regards,
    Charlie Liao
    TechNet Community Support

Maybe you are looking for

  • Is there a way to install Windows (with programs) on an external drive and run it from the Pro?

    I have a 1TB Seagate Goflex that I am using to backup the Mac, but I want to partition it and run Windows and Windows Apps from it, rather than risk my HDD.  Does anyone have any experience doing that or have any ideas on how it might be done?  I am

  • Shrinking the size of a form

    Hi After I create a form (using Adobe X Pro/Live Cycle) can I reduce size of the form before releasing it for general use? I know how to optimize a pdf I fill in... this is before that, while the form is being created... The form I created is just ov

  • Xsl:text

    xsl:text elements always are shown as errors in xslt. It appears that the dtd being used by JDeveloper is wrong. Can someone at Oracle respond to this and tell me either where a good dtd is, and how to get jdeveloper to recognize it, or when a patch

  • Re: (forte-users) FW: (forte-users) Serialisation

    Here is a Word formatted copy of the Tech Note "Slabbert, Etienne" <etiennemds.co.za> 02/17/00 04:10AM >>>Hi, I cannot get hold of Tech Note 10398..... can anyone email me a copy? Tx Etienne -----Original Message----- From: Klerk, Theo de [SMTP:Theo.

  • Advice on upgrading

    Hello all- So, I've gotten a bit tired of all of the capture problems related to new versions of Quicktime, etc. (I'm still on FCP 4.5). I'm now prepared to upgrade in the hopes that it will eliminate these headaches. My question is - what do I "need