Backup Exec 12.5 and Rac database
We always use rman to backup and restore our rac database without problems but now we would like to try with Backup Exec 12.5. Yesterday we installed the server for backup exec and the oracle agent for linux and by the way we did a full backup of our Rac database. The problems was when we tried to restore it. When we restore a single database it work but when we try with RAC it does not work.
Questions:
Is there a different agent for oracle Rac database or it is the same?
Are there aditional steps to configure the agent for Rac database?
I really appreciate your help.
++We are using flash recovery area and all archive logs, flash back logs and backup sets go in there?The system administrator wants to back up the full directory of flash recovery area. Would that be enough?Is a backup of oracle home is needed?+
Normally there is no need to take oracle backup home , if yours FRA contain baskupset for database files (controlfile,db files),archivelogs ,flashback logs.You should also consider the pfile if you are not using spfile,spfile itself contain in RMAN backupsets.
Consider yours oracle binary backup (i.e cold backup) before any maintainance (patching activity).
Read http://oraware.blogspot.com/2008/07/fra-capacity-planning.html
Are there any backup settings required before backing up files while the database is on, like setting them in backup mode or etc?
yes for online database should be in archivelog mode,if you are using RMAN then there is no any setting required before backup , using RMAN you just have to connect with target database and start online backup using yours own backup script.
Any documentation discussing the backup steps, and what needs to be backed up will be appreciated
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/bkup.htmlKhurram
Similar Messages
-
Which difference parallel database and RAC database
Hi Experts,
I saw some document about parallel database and RAC database.
My boss confused these two product.
which difference between parallel database and RAC database?
does parallel database is a "old RAC"?
Thanks
JimRAC is the new name with many features for old depreciated Oracle Parallel Server (OPS).
It was avialable till 8i, since 9i it is called RAC.
Regards
Edited by: skvaish1 on Mar 30, 2010 12:59 PM -
Upgrading clusterware and RAC database including ASM
Hi All,
I have a 3 node RAC database with ASM running on RHEL4(32bit). current version is 10.2.0.1. I want to upgrade clusterware, database and ASM to 10.2.0.4.
Please let me know the patch number for this upgradation.
At the time of googling i found that 1st we have to upgrade 10.2.0.1 to 10.2.0.3 then we can upgrade it to 10.2.0.4. Is it true?
ThanksYou are absolutely correct. Database should be upgraded at last. I may be wrong regarding upgrading of ASM. but what my thought is saying it should be upgraded or it may upgrade when we will upgrade our database. So please think little bit on it. ASM has its own instance. we are upgrading clusterware and database. why we are not upgrading our ASM. Then what should be the method to upgrade ASM.
Please correct me in i am wrong.
With Regards,
snp -
Can I use DB13C for central backup scheduling of MaxDB and Oracle databases
Hello,
we have installed Solution Manager 7.0 on Windows with MaxDB. We want to use DB13C to schedule and Monitor our database backups. We have 8 systems with Oracle Database and 7 systems with MaxDB database, 1 DB2 and 1 MS-SQL Server . Due to QAS issues we can´t migrate to one database system. Is there a possibility to handle all database systems from our Solution Manager ?
Thank you
HeikoYou can use DBACOCKPIT for that purpose. Import the systems from the SLD.
Markus -
RAC database cannot be connected after Grid and RAC DB have been installed
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (main VM rac1 and slave VM rac2) with Oracle Linux 5.6
according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
Grid and RAC database have been installed successfully for both VMs rac1 and rac2. I am using the slave VM rac2 to test Grid and RAC database.
I have run the commands as below:
[ora11g@rac2 bin]$ pwd
/u01/app/grid/bin
[ora11g@rac2 bin]$ ./crsctl status resource
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
[ora11g@rac2 bin]$ ./srvctl config database -d racdb
PRCD-1027 : Failed to retrieve database racdb
PRCR-1070 : Failed to check if resource ora.racdb.db is registered
Cannot communicate with crsd
[ora11g@rac2 bin]$ ./sqlplus SYS/SYS
SQL*Plus: Release 11.2.0.1.0 Production on Sat Mar 10 14:07:07 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYS
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYSTEM
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
[ora11g@rac2 /]$ /u02/11g_db/ora11g/racdb/sqldeveloper/sqldeveloper.sh
In its GUI, the inputs are below:
Connection: C1
Username: SYS
PWD: SYS
Role: SYSDBA
Connection Type: Basic
Hostname: rac2.localdomain
Port: 1521
SID: racdb2
Test: failed. Network Adapter could not establish connection.
Browser url: https://rac2.localdomain:1158/em
Its output: cannot connect to the server at https://rac2.localdomain:1158/em
As we see the outputs for commands above, Grid is running at the beginning but now is not running. SQLPLUS and SQLdeveloper cannot connect with database. Browser url cannot connect to the console https://rac2.localdomain:1158/em.
My question is:
Do any folks understand how to solve the above 4 problems ?
Thanks.Folks,
Hello. Thanks a lot for replying. The last 50 lines of the file "ocssd.log" is as below:
[ora11g@rac1 cssd]$ pwd
/u01/app/grid/log/rac1/cssd
[ora11g@rac1 cssd]$ ls
cssdOUT.log ocssd.log ocssd.trc
[ora11g@rac1 cssd]$ cat ocssd.log
2012-03-08 21:13:54.415: [ CLSF][1150617920]Destroying CLSF context
2012-03-08 21:13:55.418: [ CLSF][1150617920]Allocated CLSF context
2012-03-08 21:13:55.418: [ SKGFD][1150617920]Handle 0x7105660 from lib :ASM:/opt/oracle/extapi/64/asm/orcl/1/libasm.so: for disk :ORCL:ASMDISK1:
2012-03-08 21:13:55.418: [ CLSF][1150617920]Opened hdl:0x710d800 for dev:ORCL:ASMDISK1:
2012-03-08 21:13:55.470: [ CLSF][1150617920]Closing handle:0x710d800
2012-03-08 21:13:55.470: [ SKGFD][1150617920]Lib :ASM:/opt/oracle/extapi/64/asm/orcl/1/libasm.so: closing handle 0x7105660 for disk :ORCL:ASMDISK1:
2012-03-08 21:13:55.470: [ CLSF][1150617920]Destroying CLSF context
2012-03-08 21:13:56.472: [ CSSD][1685425920]clssnmlfmtlease: uniqueness 1331259161, gipc addr nm_rac-scan#192.168.137.35#36456
2012-03-08 21:13:56.608: [ CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:56.697: [ CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:56.754: [ CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:57.425: [ CSSD][1685425920]clssnmlgetslot:lease acquisition for node rac1/slot 1 completed in 19380 msecs
2012-03-08 21:13:57.559: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 1, , has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 89443, LATS 4294905400, lastSeqNo 89443, uniqueness 0, timestamp 1331258081/38436564
2012-03-08 21:13:57.559: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 2, , has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 80216, LATS 4294905400, lastSeqNo 80216, uniqueness 1331259094, timestamp 1331259236/4294905820
2012-03-08 21:13:57.860: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 1, rac1, has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 89444, LATS 4294905700, lastSeqNo 89444, uniqueness 0, timestamp 1331258081/38436564
2012-03-08 21:13:57.860: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 80217, LATS 4294905700, lastSeqNo 80217, uniqueness 1331259094, timestamp 1331259237/4294906920
2012-03-08 21:13:58.049: [ CSSD][1685425920]clssnmvDHBValidate2012-03-10 12:07:08.298: [ CSSD][471957248]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331399227
2012-03-10 12:07:08.300: [ CSSD][471957248]clssscmain: Environment is production
2012-03-10 12:07:08.300: [ CSSD][471957248]clssscmain: Core file size limit extended
2012-03-10 12:07:08.518: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-10 12:07:08.518: [ CSSD][471957248]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-10 12:07:08.519: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-10 12:07:09.675: [ CSSD][471957248]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-10 12:07:09.675: [ CSSD][471957248]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-10 12:07:09.675: [ CSSD][471957248]clssscmain: Running as user ora11g
[ clsdmt][1088276800]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-10 12:07:09.821: [ clsdmt][1088276800]PID for the Process [5971], connkey 4
2012-03-10 12:07:09.822: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-10 12:07:09.823: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-10 12:07:09.847: [ CSSD][471957248]clssscmain: initgminfo done
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssgmclientlsnr: Spawned
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssgmEvtInformation: reqtype (13) req (0xadd7b20)
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssnmQueueNotification: type (13) 0xadd7b20
2012-03-10 12:07:09.973: [ CSSD][1098766656]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-10 12:07:09.975: [ CSSD][1098766656]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))
2012-03-10 12:07:09.975: [ GPnP][471957248]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-10 12:07:09.975: [ GPnP][471957248]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0xade1aa0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e1fdf67e-e0b9ca68-5971))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e0b9ca68-e1fdf67e-5976))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1758, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A2370613
2012-03-10 12:07:10.045: [GIPCXCPT][1098766656]gipcmodMuxTransferAccept: internal accept request failed endp 0xade0740 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-10 12:07:10.045: [ GIPCMUX][1098766656]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0xade0740 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))', remoteAddr '', numPend 02012-03-10 12:21:34.610: [ CSSD][4216872704]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331400094
2012-03-10 12:21:34.612: [ CSSD][4216872704]clssscmain: Environment is production
2012-03-10 12:21:34.612: [ CSSD][4216872704]clssscmain: Core file size limit extended
2012-03-10 12:21:34.675: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-10 12:21:34.675: [ CSSD][4216872704]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-10 12:21:34.676: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-10 12:21:34.770: [ CSSD][4216872704]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-10 12:21:34.770: [ CSSD][4216872704]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-10 12:21:34.771: [ CSSD][4216872704]clssscmain: Running as user ora11g
[ clsdmt][1123064128]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-10 12:21:37.926: [ clsdmt][1123064128]PID for the Process [6687], connkey 4
2012-03-10 12:21:38.276: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-10 12:21:38.276: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-10 12:21:39.171: [ CSSD][4216872704]clssscmain: initgminfo done
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssgmclientlsnr: Spawned
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssgmEvtInformation: reqtype (13) req (0x1a5a7160)
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssnmQueueNotification: type (13) 0x1a5a7160
2012-03-10 12:21:42.822: [ CSSD][1144043840]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-10 12:21:42.872: [ CSSD][1144043840]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))
2012-03-10 12:21:42.873: [ GPnP][4216872704]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-10 12:21:42.873: [ GPnP][4216872704]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x1a5b10e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=c53aa194-7b930898-6687))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=7b930898-c53aa194-5928))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1728, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A3702366
2012-03-10 12:21:43.201: [GIPCXCPT][1144043840]gipcmodMuxTransferAccept: internal accept request failed endp 0x1a5afd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-10 12:21:43.201: [ GIPCMUX][1144043840]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x1a5afd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))', remot2012-03-11 11:17:15.417: [ CSSD][1249378048]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331479035
2012-03-11 11:17:15.418: [ CSSD][1249378048]clssscmain: Environment is production
2012-03-11 11:17:15.418: [ CSSD][1249378048]clssscmain: Core file size limit extended
2012-03-11 11:17:15.797: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 11:17:15.797: [ CSSD][1249378048]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 11:17:15.798: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 11:17:17.472: [ CSSD][1249378048]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 11:17:17.472: [ CSSD][1249378048]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 11:17:17.473: [ CSSD][1249378048]clssscmain: Running as user ora11g
[ clsdmt][1098090816]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 11:17:17.517: [ clsdmt][1098090816]PID for the Process [5960], connkey 4
2012-03-11 11:17:17.573: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 11:17:17.574: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 11:17:17.586: [ CSSD][1249378048]clssscmain: initgminfo done
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssgmclientlsnr: Spawned
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssgmEvtInformation: reqtype (13) req (0x129d5160)
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssnmQueueNotification: type (13) 0x129d5160
2012-03-11 11:17:17.619: [ CSSD][1141242176]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 11:17:17.621: [ CSSD][1141242176]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))
2012-03-11 11:17:17.621: [ GPnP][1249378048]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 11:17:17.621: [ GPnP][1249378048]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x129df0e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=22574215-7bcb9bab-5960))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=7bcb9bab-22574215-5919))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x171f, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A2554722
2012-03-11 11:17:18.168: [GIPCXCPT][1141242176]gipcmodMuxTransferAccept: internal accept request failed endp 0x129ddd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 11:17:18.168: [ GIPCMUX][1141242176]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x129ddd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))', remot2012-03-11 13:50:45.588: [ CSSD][1847344896]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331488245
2012-03-11 13:50:45.589: [ CSSD][1847344896]clssscmain: Environment is production
2012-03-11 13:50:45.589: [ CSSD][1847344896]clssscmain: Core file size limit extended
2012-03-11 13:50:45.812: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 13:50:45.812: [ CSSD][1847344896]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 13:50:45.813: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 13:50:46.364: [ CSSD][1847344896]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 13:50:46.364: [ CSSD][1847344896]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 13:50:46.365: [ CSSD][1847344896]clssscmain: Running as user ora11g
[ clsdmt][1106819392]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 13:50:46.512: [ clsdmt][1106819392]PID for the Process [5598], connkey 4
2012-03-11 13:50:46.518: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 13:50:46.521: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 13:50:46.548: [ CSSD][1847344896]clssscmain: initgminfo done
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssgmclientlsnr: Spawned
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssgmEvtInformation: reqtype (13) req (0x196b6160)
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssnmQueueNotification: type (13) 0x196b6160
2012-03-11 13:50:46.618: [ CSSD][1090939200]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 13:50:46.621: [ CSSD][1090939200]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))
2012-03-11 13:50:46.621: [ GPnP][1847344896]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 13:50:46.622: [ GPnP][1847344896]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x196c00e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=629302b2-9f0ad2aa-5598))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=9f0ad2aa-629302b2-5616))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x15f0, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A8205079
2012-03-11 13:50:47.159: [GIPCXCPT][1090939200]gipcmodMuxTransferAccept: internal accept request failed endp 0x196bed80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 13:50:47.159: [ GIPCMUX][1090939200]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x196bed80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))', remot2012-03-11 14:15:32.370: [ CSSD][2372304640]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331489730
2012-03-11 14:15:32.383: [ CSSD][2372304640]clssscmain: Environment is production
2012-03-11 14:15:32.384: [ CSSD][2372304640]clssscmain: Core file size limit extended
2012-03-11 14:15:32.933: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 14:15:32.933: [ CSSD][2372304640]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 14:15:32.935: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 14:15:48.413: [ CSSD][2372304640]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 14:15:48.413: [ CSSD][2372304640]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 14:15:48.421: [ CSSD][2372304640]clssscmain: Running as user ora11g
[ clsdmt][1119824192]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 14:16:21.102: [ clsdmt][1119824192]PID for the Process [7155], connkey 4
2012-03-11 14:16:22.219: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 14:16:22.221: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 14:16:27.367: [ CSSD][2372304640]clssscmain: initgminfo done
2012-03-11 14:16:43.377: [ CSSD][1140803904]clssgmclientlsnr: Spawned
2012-03-11 14:16:43.378: [ CSSD][1140803904]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 14:16:43.378: [ CSSD][1140803904]clssgmEvtInformation: reqtype (13) req (0x6964160)
2012-03-11 14:16:43.378: [ CSSD][1140803904]clssnmQueueNotification: type (13) 0x6964160
2012-03-11 14:16:43.389: [ CSSD][1140803904]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 14:16:43.554: [ CSSD][1140803904]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))
2012-03-11 14:16:43.555: [ GPnP][2372304640]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 14:16:43.555: [ GPnP][2372304640]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 14:16:44.146: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x696e0e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=0448e4a3-ad06465f-7155))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=ad06465f-0448e4a3-7132))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1bdc, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A8989982
2012-03-11 14:16:44.147: [GIPCXCPT][1140803904]gipcmodMuxTransferAccept: internal accept request failed endp 0x696cd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 14:16:44.147: [ GIPCMUX][1140803904]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x696cd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))', remoteAddr[ora11g@rac1 cssd]$
My question is:
Could any folk find out the problem that Grid becomes not running after install RAC database ?
Thanks. -
Windows 2008 r2 windows installer issue error 1719 when install Backup exec 12.5
Hi all
After a epic weekend of rebuilding our exchange server I have tried to reinstall Backup exec 12.5 64bit, this was installed with no issues during the last build, however at the end of this build I went to reinstall Backup Exec 12.5 and it is failing with
error 1719 Windows installer issue.
I have looked on many sites and tried many things non of them have worked, has anyone managed to resolve this issue.
Dave
DJHHi Lenora
See below
Symantec Backup Exec (TM) 12.5 for Windows Servers Installation Log
03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe
03-19-2013,17:33:38 : CSetupApp::GetInstalledGUID
03-19-2013,17:33:38 : CSetupApp::LoadSetupXML
03-19-2013,17:33:38 : CSetupApp::ScanXML
03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\Setup.xml
03-19-2013,17:33:38 : MSI File Name = WindowsInstaller-KB893803-v2-x86.exe
03-19-2013,17:33:38 : MSI Version = 3.1
03-19-2013,17:33:38 : MSI Package Name = Symantec Backup Exec for Windows Servers.msi
03-19-2013,17:33:38 : System Central Processor = 64
03-19-2013,17:33:38 : Product Type = SETUP_BEX64
03-19-2013,17:33:38 : Product Name = Symantec Backup Exec for Windows Servers
03-19-2013,17:33:38 : Current Installing GUID ={BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:33:38 : Product Version = 12.5
03-19-2013,17:33:38 : CSetupSupport::IsValidMSIPackage
03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Symantec Backup Exec for Windows Servers.msi
03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:33:38 : Equal PID
03-19-2013,17:33:38 : Product version: 12.5.2213
03-19-2013,17:33:38 : StartBESequence
03-19-2013,17:33:38 : Executing BE_PreCheckInstall
03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:33:38 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,17:33:38 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:33:38 : Executing StartBESequence
03-19-2013,17:33:38 : Pulling user data from the MSI
03-19-2013,17:33:38 : Upgrade state set to 0
03-19-2013,17:33:38 : Executing SSO::PullDataMSI()
03-19-2013,17:33:38 : Executing CDlgCAS::PullDataMSI()
03-19-2013,17:33:38 : MSI processing complete
03-19-2013,17:33:38 : Pulling user data from the command line
03-19-2013,17:33:38 : COMMAND LINE: Checking UIMODE value
03-19-2013,17:33:38 : COMMAND LINE: Checking for program group placement value
03-19-2013,17:33:38 : COMMAND LINE: Checking for main feature selection
03-19-2013,17:33:38 : COMMAND LINE: Checking for serialization values
03-19-2013,17:33:38 : CDlgChooseCustom::PullDataSilent
03-19-2013,17:33:38 : After check for parameter file exists.
03-19-2013,17:33:38 : CDlgLocalChooseCustom::Pass
03-19-2013,17:33:38 : After Check for INSTALL_CHOICE.
03-19-2013,17:33:38 : After Check for INSTALL_TYPE.
03-19-2013,17:33:38 : After Check for INSTALL_MODE.
03-19-2013,17:33:38 : CDlgLocalChooseCustom Pass Function end.
03-19-2013,17:33:38 : Agent for Microsoft Exchange Server was added for evaluation
03-19-2013,17:33:38 : Agent for Microsoft SQL Server was added for evaluation
03-19-2013,17:33:38 : Ignoring the TSM switch.
03-19-2013,17:33:38 : COMMAND LINE: Checking for service account values
03-19-2013,17:33:38 : Not in Maintenance mode
03-19-2013,17:33:38 : Getting the Silent Params.
03-19-2013,17:33:38 : COMMAND LINE: checking for SSO values
03-19-2013,17:33:38 : COMMAND LINE: checking for DlgChooseDBServer values
03-19-2013,17:33:38 : COMMAND LINE: Checking for tape drivers values
03-19-2013,17:33:38 : COMMAND LINE: Checking for TSM values
03-19-2013,17:33:38 : COMMAND LINE: checking for CASO values
03-19-2013,17:33:38 : COMMAND LINE: Checking for clone values
03-19-2013,17:33:38 : COMMAND LINE: Checking progress settings
03-19-2013,17:33:38 : COMMAND LINE: Checking for NOINSTALL value
03-19-2013,17:33:38 : Setup Command Line = "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe"
03-19-2013,17:33:38 : List of switches set follows:
03-19-2013,17:33:38 : /DEST: = C:\Program Files\Symantec1\Backup Exec\
03-19-2013,17:33:38 : /SNO: = 0930292112010690
03-19-2013,17:33:38 : /USER: = backup
03-19-2013,17:33:38 : /DOM: = ACCENTPRESS
03-19-2013,17:33:38 : /PASS: = ********
03-19-2013,17:33:38 : /TS:
03-19-2013,17:33:38 : /TD: = ALL
03-19-2013,17:33:38 : /DOCS:
03-19-2013,17:33:38 : /LOADER:
03-19-2013,17:33:38 : /AOFO:
03-19-2013,17:33:38 : /EXCH:
03-19-2013,17:33:38 : /SQL:
03-19-2013,17:33:38 : /NTA:
03-19-2013,17:33:38 : /RAULUS:
03-19-2013,17:33:38 : /DBSERVER:
03-19-2013,17:33:38 : /DBINSTPATH: = C:\Program Files\Microsoft SQL Server\BE\
03-19-2013,17:33:38 : /BACKUPDATA: = 0
03-19-2013,17:33:38 : /MAC:
03-19-2013,17:33:38 : Command line processing complete
03-19-2013,17:33:38 : Install set to run in UI mode
03-19-2013,17:33:38 : CDlgPushWelcome::Pass
03-19-2013,17:33:40 : CinstOpenDlg::ValidateData
03-19-2013,17:33:43 : Validating license data
03-19-2013,17:33:44 : CDlgChooseInstall::ValidateData
03-19-2013,17:33:44 : CDlgValidationSummary::LaunchValidationTest
03-19-2013,17:33:44 : m_bUseNativeClient = 1
03-19-2013,17:33:44 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:33:44 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:33:44 : Connected to SQL Server.
03-19-2013,17:33:44 : m_bUseNativeClient = 1
03-19-2013,17:34:05 : CDlgValidationSummary::ValidateData
03-19-2013,17:34:05 : BEOperations::BE_GetInstalledProdCodeVersion
03-19-2013,17:34:05 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:34:05 : CDlgSerialNumber Pass Function.
03-19-2013,17:34:05 : After Check for Remote_Install.
03-19-2013,17:34:05 : After Check for RA_INSTALL.
03-19-2013,17:34:07 : Validating serialization data
03-19-2013,17:34:07 : CDlgLocalChooseCustom::Pass
03-19-2013,17:34:07 : After Check for INSTALL_CHOICE.
03-19-2013,17:34:07 : After Check for INSTALL_TYPE.
03-19-2013,17:34:07 : After Check for INSTALL_MODE.
03-19-2013,17:34:07 : CDlgLocalChooseCustom Pass Function end.
03-19-2013,17:34:07 : On Init of CDlgChooseCustom
03-19-2013,17:34:07 : Leaving Init of CDlgChooseCustom
03-19-2013,17:34:07 : CDlgLocalChooseCustom::OnInitDialog
03-19-2013,17:34:07 : On Init of CDlgLocalChooseCustom
03-19-2013,17:34:07 : Leaving Init of CDlgLocalChooseCustom
03-19-2013,17:34:12 : Validating Local Options Data
03-19-2013,17:34:13 : Validating service account data
03-19-2013,17:34:13 : CDlgSSO Pass Function.
03-19-2013,17:34:13 : After Check for INSTALL_MODE.
03-19-2013,17:34:13 : DlgChooseDBServer Pass Function.
03-19-2013,17:34:20 : m_bUseNativeClient = 1
03-19-2013,17:34:20 : Validating DlgChooseDBServer data
03-19-2013,17:34:20 : Drive C: Required: 1102 MB Available: 37138 MB
03-19-2013,17:34:20 : CDlgChooseTapeDrivers Pass Function.
03-19-2013,17:34:20 : After Check for INSTALL_MODE.
03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
03-19-2013,17:34:20 : After Check for INSTALL_TYPE.
03-19-2013,17:34:20 : CDlgSerialNumber Pass Function.
03-19-2013,17:34:20 : CDlgCAS Pass Function.
03-19-2013,17:34:20 : After Check for INSTALL_MODE.
03-19-2013,17:34:20 : CDlgClone Pass Function.
03-19-2013,17:34:20 : CDlgClone not passed.
03-19-2013,17:34:20 : CDlgRemoteChooseCustom Pass Function.
03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
03-19-2013,17:34:20 : Install Summary XML File:
03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.xml
03-19-2013,17:34:20 : Install Summary XSL File:
03-19-2013,17:34:20 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\InstallSummary.xsl
03-19-2013,17:34:20 : Install Summary HTML File:
03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.htm
03-19-2013,17:34:20 : Not Quickstart Edition
03-19-2013,17:34:20 : Entering GetSQLAndCASOInformation
03-19-2013,17:34:20 : Leaving GetSQLAndCASOInformation
03-19-2013,17:34:20 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:34:20 : m_bUseNativeClient = 1
03-19-2013,17:34:20 : *************** About Backing Up Exchange 2007 Servers *************** To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this
computer. The Management Tools can be installed during a custom install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft
Exchange Server MAPI Client and Collaboration Data Objects package version 06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,17:34:21 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:34:27 : Executing InstallLiveUpdate.
03-19-2013,17:34:40 : Installing .Net Framework 2.0 SP1.
03-19-2013,17:34:40 : Checking for .Net Framework 2.0 SP1.
03-19-2013,17:34:40 : Vista or Longhorn server. Not installing .NET Frameworks.
03-19-2013,17:34:40 : .NET Framework was detected. Skipping install.
03-19-2013,17:34:41 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,17:34:41 : m_bUseNativeClient = 1
03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes;DATABASE=master
03-19-2013,17:34:41 : SQL Server version 9
03-19-2013,17:34:41 : SQL version returned: 9
03-19-2013,17:34:41 : Executing SQL_GetServicePack.
03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:34:41 : Connected to SQL Server.
03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:34:41 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:34:41 : Connected to SQL Server.
03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Express Edition
03-19-2013,17:34:41 : "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\SQLExpress\SQLEXPR.exe" /wait /qn /norestart /lv "C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt" INSTANCENAME=BKUPEXEC SQLACCOUNT="NT AUTHORITY\SYSTEM" SQLPASSWORD=""
UPGRADE=SQL_Engine,SQL_Data_Files,SQL_Replication,Client_Components,Connectivity SAPWD=**** DISABLENETWORKPROTOCOLS=0
03-19-2013,17:34:45 : V-225-53: ERROR: Failed to install SQL Express BKUPEXEC instance with error 1601. ***To search for information about this error, click
here
03-19-2013,17:34:45 : Please review C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt for more details.
03-19-2013,17:34:45 : Failed to install third party products.
03-19-2013,17:37:25 : Validating install complete
03-19-2013,17:37:25 : Success unloading BEINSTDLGS.DLL.
03-19-2013,17:37:25 : CLEANUP: Install has removed the following files from: C:\Users\ADMINI~1\AppData\Local\Temp\1\{BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:37:25 : Removed files:
03-19-2013,17:37:25 : ERROR: Installation failed with error 1603.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,17:41:16 : Windows Operating System Version: 6.1
03-19-2013,17:41:16 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,17:41:18 : Executing managed _Setup:
03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,17:41:18 : Loading XML from:
03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,17:41:18 : RawsDlgSequence::CheckInstMode
03-19-2013,17:41:18 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,17:41:19 : Launching UI Install
03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:41:19 : m_bUseNativeClient = 1
03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:41:20 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,17:41:20 : CopySupportFiles
03-19-2013,17:41:20 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,17:41:20 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:41:20 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,17:41:20 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,17:41:28 : Typical install value is set to : True
03-19-2013,17:41:29 : m_bUseNativeClient = 1
03-19-2013,17:41:29 : Executing SQL_GetServicePack.
03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:41:29 : Connected to SQL Server.
03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:41:29 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:41:29 : Connected to SQL Server.
03-19-2013,17:41:29 : Executing SQL_GetServicePack.
03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:41:29 : Connected to SQL Server.
03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:41:29 : m_bUseNativeClient = 1
03-19-2013,17:41:51 : m_bUseNativeClient = 1
03-19-2013,17:41:51 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:43:04 : Currently executing as ACCENTPRESS\administrator
03-19-2013,17:43:04 : Install is not executing as the service account.
03-19-2013,17:43:04 : Successfully Logged on as service account.
03-19-2013,17:43:04 : Successfully impersonated service account.
03-19-2013,17:43:04 : EUserName value successfully written to the registry.
03-19-2013,17:43:04 : EPassword value successfully written to the registry.
03-19-2013,17:43:04 : EDomain value successfully written to the registry.
03-19-2013,17:43:09 : There were no remote computers selected for install
03-19-2013,17:43:09 : m_bUseNativeClient = 1
03-19-2013,17:43:09 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,17:43:10 : Terminal Services enabled.
03-19-2013,17:43:10 : Terminal Services server has been set to Install mode.
03-19-2013,17:43:11 : Checking for .Net Framework 3.5 SP1.
03-19-2013,17:43:11 : Executing InstallLiveUpdate.
03-19-2013,17:44:35 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,17:44:35 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,17:44:35 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,17:44:35 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,17:44:35 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:44:35 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,17:44:35 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:44:35 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,17:44:35 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:44:36 : Starting Install
03-19-2013,17:44:36 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,17:44:36 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:44:36 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,17:44:36 : Discovered Total Actions: 115
03-19-2013,17:44:36 : The return code from the MSI is: 1601
03-19-2013,17:44:36 : Cleaning up the symc status key
03-19-2013,17:44:36 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,17:44:36 : Clean up Symantec installer keys.
03-19-2013,17:44:37 : Terminal Services enabled.
03-19-2013,17:44:37 : Terminal Services server has been set to Execute mode.
03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,17:44:57 : BeSeqDlgs::DlgInstallComplete
03-19-2013,17:44:57 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,17:45:25 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:45:28 : Gathering Telemetry items
03-19-2013,17:45:28 : Failed to start the management service
03-19-2013,17:45:28 : Service BackupExecManagementService was not found on computer '.'.
03-19-2013,17:45:28 : Sending Telemetry to Symantec
03-19-2013,17:45:28 : Transmit Telemetry initialized.
03-19-2013,17:45:28 : TelemetryRegistryHelpers initialized.
03-19-2013,17:45:29 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
03-19-2013,17:56:31 : Windows Operating System Version: 6.1
03-19-2013,17:56:31 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,17:56:33 : Executing managed _Setup:
03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,17:56:33 : Loading XML from:
03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,17:56:33 : RawsDlgSequence::CheckInstMode
03-19-2013,17:56:33 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,17:56:34 : Launching UI Install
03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:56:35 : m_bUseNativeClient = 1
03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:56:35 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,17:56:35 : CopySupportFiles
03-19-2013,17:56:35 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,17:56:35 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:56:35 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,17:56:35 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,17:56:49 : Typical install value is set to : True
03-19-2013,17:56:50 : Executing SQL_GetServicePack.
03-19-2013,17:56:50 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:56:51 : Connected to SQL Server.
03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:56:51 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:56:51 : Connected to SQL Server.
03-19-2013,17:56:51 : Executing SQL_GetServicePack.
03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:56:51 : Connected to SQL Server.
03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:57:37 : m_bUseNativeClient = 1
03-19-2013,17:57:37 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:58:41 : Currently executing as ACCENTPRESS\administrator
03-19-2013,17:58:41 : Install is not executing as the service account.
03-19-2013,17:58:41 : Successfully Logged on as service account.
03-19-2013,17:58:41 : Successfully impersonated service account.
03-19-2013,17:58:41 : EUserName value successfully written to the registry.
03-19-2013,17:58:41 : EPassword value successfully written to the registry.
03-19-2013,17:58:41 : EDomain value successfully written to the registry.
03-19-2013,17:58:51 : There were no remote computers selected for install
03-19-2013,17:58:51 : m_bUseNativeClient = 1
03-19-2013,17:58:51 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,17:58:52 : Terminal Services enabled.
03-19-2013,17:58:52 : Terminal Services server has been set to Install mode.
03-19-2013,17:58:52 : Checking for .Net Framework 3.5 SP1.
03-19-2013,17:58:54 : Executing InstallLiveUpdate.
03-19-2013,17:59:06 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,17:59:06 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,17:59:07 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,17:59:07 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:59:07 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,17:59:07 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:59:07 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,17:59:07 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:59:07 : Starting Install
03-19-2013,17:59:07 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:59:07 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,17:59:08 : Discovered Total Actions: 115
03-19-2013,17:59:08 : The return code from the MSI is: 1601
03-19-2013,17:59:08 : Cleaning up the symc status key
03-19-2013,17:59:08 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,17:59:08 : Clean up Symantec installer keys.
03-19-2013,17:59:10 : Terminal Services enabled.
03-19-2013,17:59:10 : Terminal Services server has been set to Execute mode.
03-19-2013,18:00:01 : The return code is: 0
03-19-2013,18:00:01 : SUCCESS: Installation has completed successfully.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:02:24 : Windows Operating System Version: 6.1
03-19-2013,18:02:24 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:02:26 : Executing managed _Setup:
03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:02:26 : Loading XML from:
03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:02:26 : RawsDlgSequence::CheckInstMode
03-19-2013,18:02:26 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:02:26 : Launching UI Install
03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:02:26 : m_bUseNativeClient = 1
03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:02:26 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:02:26 : CopySupportFiles
03-19-2013,18:02:26 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:02:27 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:02:27 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:02:27 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:03:11 : The return code is: 0
03-19-2013,18:03:11 : SUCCESS: Installation has completed successfully.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:03:21 : Windows Operating System Version: 6.1
03-19-2013,18:03:21 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:03:22 : Windows Operating System Version: 6.1
03-19-2013,18:03:22 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:03:23 : Executing managed _Setup:
03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:03:23 : Loading XML from:
03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:03:23 : RawsDlgSequence::CheckInstMode
03-19-2013,18:03:23 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:03:24 : Launching UI Install
03-19-2013,18:03:24 : Executing managed _Setup:
03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:03:24 : m_bUseNativeClient = 1
03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:03:24 : Loading XML from:
03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:03:24 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:03:24 : RawsDlgSequence::CheckInstMode
03-19-2013,18:03:24 : CopySupportFiles
03-19-2013,18:03:24 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:03:24 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:03:24 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:03:24 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:03:24 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:03:58 : Typical install value is set to : True
03-19-2013,18:03:58 : m_bUseNativeClient = 1
03-19-2013,18:03:58 : Executing SQL_GetServicePack.
03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:03:58 : Connected to SQL Server.
03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:03:58 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:03:58 : Connected to SQL Server.
03-19-2013,18:03:58 : Executing SQL_GetServicePack.
03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:03:58 : Connected to SQL Server.
03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:03:58 : m_bUseNativeClient = 1
03-19-2013,18:04:20 : m_bUseNativeClient = 1
03-19-2013,18:04:20 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:05:35 : Currently executing as ACCENTPRESS\administrator
03-19-2013,18:05:35 : Install is not executing as the service account.
03-19-2013,18:05:35 : Successfully Logged on as service account.
03-19-2013,18:05:35 : Successfully impersonated service account.
03-19-2013,18:05:35 : EUserName value successfully written to the registry.
03-19-2013,18:05:35 : EPassword value successfully written to the registry.
03-19-2013,18:05:35 : EDomain value successfully written to the registry.
03-19-2013,18:05:36 : There were no remote computers selected for install
03-19-2013,18:05:36 : m_bUseNativeClient = 1
03-19-2013,18:05:36 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,18:05:37 : Terminal Services enabled.
03-19-2013,18:05:37 : Terminal Services server has been set to Install mode.
03-19-2013,18:05:37 : Checking for .Net Framework 3.5 SP1.
03-19-2013,18:05:38 : Executing InstallLiveUpdate.
03-19-2013,18:05:50 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,18:05:50 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,18:05:50 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,18:05:50 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:05:50 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,18:05:50 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:05:50 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,18:05:50 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:05:50 : Starting Install
03-19-2013,18:05:50 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:05:50 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,18:05:50 : Discovered Total Actions: 115
03-19-2013,18:05:50 : The return code from the MSI is: 1601
03-19-2013,18:05:51 : Cleaning up the symc status key
03-19-2013,18:05:51 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,18:05:51 : Clean up Symantec installer keys.
03-19-2013,18:05:51 : Terminal Services enabled.
03-19-2013,18:05:51 : Terminal Services server has been set to Execute mode.
03-19-2013,18:06:32 : The return code is: 0
03-19-2013,18:06:32 : SUCCESS: Installation has completed successfully.
03-19-2013,18:07:36 : Setup is already running. Unable to initialize another instance of setup.
03-19-2013,18:07:39 : Error initializing shared data
03-19-2013,18:07:39 : ERROR: Installation failed with error 1603. GetLastError = :0
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:13:44 : Windows Operating System Version: 6.1
03-19-2013,18:13:44 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:13:44 : Windows Operating System Version: 6.1
03-19-2013,18:13:44 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:13:46 : Executing managed _Setup:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:13:46 : Executing managed _Setup:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:13:46 : Loading XML from:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:13:46 : Loading XML from:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:13:47 : Launching UI Install
03-19-2013,18:13:47 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:13:48 : m_bUseNativeClient = 1
03-19-2013,18:13:48 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:13:48 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:13:48 : CopySupportFiles
03-19-2013,18:13:48 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:13:48 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:13:48 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:13:48 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:13:54 : Typical install value is set to : True
03-19-2013,18:13:55 : m_bUseNativeClient = 1
03-19-2013,18:13:55 : Executing SQL_GetServicePack.
03-19-2013,18:13:55 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:13:56 : Connected to SQL Server.
03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:13:56 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:13:56 : Connected to SQL Server.
03-19-2013,18:13:56 : Executing SQL_GetServicePack.
03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:13:56 : Connected to SQL Server.
03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:13:56 : m_bUseNativeClient = 1
03-19-2013,18:14:41 : m_bUseNativeClient = 1
03-19-2013,18:14:41 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:16:09 : Service account specified is not valid
03-19-2013,18:16:09 : Unable to authenticate with the user and password information given for ACCENTPRESS\backup.
03-19-2013,18:16:10 : Error validating service account credentials.
03-19-2013,18:16:20 : Currently executing as ACCENTPRESS\administrator
03-19-2013,18:16:20 : Install is not executing as the service account.
03-19-2013,18:16:20 : Successfully Logged on as service account.
03-19-2013,18:16:20 : Successfully impersonated service account.
03-19-2013,18:16:20 : EUserName value successfully written to the registry.
03-19-2013,18:16:20 : EPassword value successfully written to the registry.
03-19-2013,18:16:20 : EDomain value successfully written to the registry.
03-19-2013,18:16:22 : There were no remote computers selected for install
03-19-2013,18:16:22 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,18:16:23 : Terminal Services enabled.
03-19-2013,18:16:23 : Terminal Services server has been set to Install mode.
03-19-2013,18:16:23 : Checking for .Net Framework 3.5 SP1.
03-19-2013,18:16:25 : Executing InstallLiveUpdate.
03-19-2013,18:16:37 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,18:16:37 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,18:16:38 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,18:16:38 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:16:38 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,18:16:38 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:16:38 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,18:16:38 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:16:38 : Starting Install
03-19-2013,18:16:38 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:16:38 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,18:16:39 : Discovered Total Actions: 115
03-19-2013,18:16:39 : The return code from the MSI is: 1601
03-19-2013,18:16:39 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,18:16:39 : Clean up Symantec installer keys.
03-19-2013,18:16:39 : Cleaning up the symc status key
03-19-2013,18:16:41 : Terminal Services enabled.
03-19-2013,18:16:41 : Terminal Services server has been set to Execute mode.
03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,18:17:08 : BeSeqDlgs::DlgInstallComplete
03-19-2013,18:17:08 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,18:17:09 : Gathering Telemetry items
03-19-2013,18:17:09 : Failed to start the management service
03-19-2013,18:17:09 : Service BackupExecManagementService was not found on computer '.'.
03-19-2013,18:17:09 : Sending Telemetry to Symantec
03-19-2013,18:17:09 : Transmit Telemetry initialized.
03-19-2013,18:17:09 : TelemetryRegistryHelpers initialized.
03-19-2013,18:17:21 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
03-19-2013,18:17:33 : TransmitTelemetry.TransmitMessage URL=http://statsbe.norton.com/n/p, Caught WebException The remote name could not be resolved: 'statsbe.norton.com'
03-19-2013,18:17:33 : Telemetry transmission failed. Data was not sent.
03-19-2013,18:17:33 : The return code is: 1601
03-19-2013,18:17:33 : ERROR: Installation failed with error 1601. GetLastError = :0
03-19-2013,18:17:48 : Setup is already running. Unable to initialize another instance of setup.
03-19-2013,18:17:51 : Error initializing shared data
03-19-2013,18:53:53 : m_bUseNativeClient = 1
03-19-2013,18:53:53 : Executing SQL_GetServicePack.
03-19-2013,18:53:53 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:53:54 : Connected to SQL Server.
03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:53:54 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:53:54 : Connected to SQL Server.
03-19-2013,18:53:54 : Executing SQL_GetServicePack.
03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:53:54 : Connected to SQL Server.
03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:53:54 : m_bUseNativeClient = 1
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:58:06 : Windows Operating System Version: 6.1
03-19-2013,18:58:06 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:58:08 : Executing managed _Setup:
03-19-2013,18:58:08 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:58:09 : Loading XML from:
03-19-2013,18:58:09 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:58:09 : RawsDlgSequence::CheckInstMode
03-19-2013,18:58:09 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:58:09 : Launching UI Install
03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:58:10 : m_bUseNativeClient = 1
03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:58:10 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:58:10 : CopySupportFiles
03-19-2013,18:58:10 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:58:11 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:58:11 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:58:11 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:58:15 : Typical install value is set to : True
03-19-2013,18:58:16 : m_bUseNativeClient = 1
03-19-2013,18:58:16 : Executing SQL_GetServicePack.
03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:58:16 : Connected to SQL Server.
03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:58:16 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:58:16 : Connected to SQL Server.
03-19-2013,18:58:16 : Executing SQL_GetServicePack.
03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:58:16 : Connected to SQL Server.
03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:58:16 : m_bUseNativeClient = 1
03-19-2013,18:58:49 : m_bUseNativeClient = 1
03-19-2013,18:58:49 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:59:43 : Currently executing as ACCENTPRESS\administrator
03-19-2013,18:59:43 : Install is not executing as the service account.
03-19-2013,18:59:43 : Successfully Logged on as service account.
03-19-2013,18:59:44 : Successfully impersonated service account.
03-19-2013,18:59:44 : EUserName value successfully written to the registry.
03-19-2013,18:59:44 : EPassword value successfully written to the registry.
03-19-2013,18:59:44 : EDomain value successfully written to the registry.
03-19-2013,18:59:46 : There were no remote computers selected for install
03-19-2013,18:59:46 : m_bUseNativeClient = 1
03-19-2013,18:59:46 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,18:59:47 : Terminal Services enabled.
03-19-2013,18:59:47 : Terminal Services server has been set to Install mode.
03-19-2013,18:59:47 : Checking for .Net Framework 3.5 SP1.
03-19-2013,18:59:49 : Executing InstallLiveUpdate.
03-19-2013,19:00:01 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,19:00:01 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,19:00:01 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,19:00:01 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,19:00:01 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,19:00:01 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,19:00:01 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,19:00:02 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,19:00:02 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,19:00:02 : Starting Install
03-19-2013,19:00:02 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,19:00:02 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,19:00:02 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,19:00:03 : Discovered Total Actions: 115
03-19-2013,19:00:03 : The return code from the MSI is: 1601
03-19-2013,19:00:03 : Cleaning up the symc status key
03-19-2013,19:00:03 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,19:00:03 : Clean up Symantec installer keys.
03-19-2013,19:00:05 : Terminal Services enabled.
03-19-2013,19:00:05 : Terminal Services server has been set to Execute mode.
03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,19:00:07 : BeSeqDlgs::DlgInstallComplete
03-19-2013,19:00:07 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,19:00:10 : Gathering Telemetry items
03-19-2013,19:00:10 : Failed to start the management service
03-19-2013,19:00:10 : Service BackupExecManagementService was not found on computer '.'.
03-19-2013,19:00:10 : Sending Telemetry to Symantec
03-19-2013,19:00:10 : Transmit Telemetry initialized.
03-19-2013,19:00:10 : TelemetryRegistryHelpers initialized.
03-19-2013,19:00:10 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
03-19-2013,19:00:10 : Telemetry data was successfully sent to Symantec
03-19-2013,19:00:10 : The return code is: 1601
03-19-2013,19:00:11 : ERROR: Installation failed with error 1601. GetLastError = :0
DJH -
Backup Exec for NetWare - Replacement?
Since Symantec has discontinued support for Backup Exec for NetWare and we have dozens of tapes we will need access to for years and we do NOT want to buy a Windows Server just to read those tapes, is there any vendor selling backup software that can read those Backup Exec for NetWare tapes?
We don't care if the extended attributes can't be restored as long as we can get the data files.dsqrd wrote:
> Since Symantec has discontinued support for Backup Exec for NetWare and
> we have dozens of tapes we will need access to for years and we do NOT
> want to buy a Windows Server just to read those tapes, is there any
> vendor selling backup software that can read those Backup Exec for
> NetWare tapes?
>
> We don't care if the extended attributes can't be restored as long as
> we can get the data files.
>
>
http://laytongraphics.com/mtf/MTF_100a.PDF
implies that since the BENW stored stuff in Microsoft Tape Format,
anyone supporting this MIGHT be able to access it.
I doubt it's that easy though. Software compression, proprietary blocks.
Meanwhile SBACKUP, Syncsort and other seem to have chosend SIDF, wwhich
was Novell's solution.
I suspect you have to call everyone, ask, and test. And I'd still guess
you have a 90% chance of being screwed. Backup software has never played
nice. -
Install 11gR2 RAC Database Problem: Invalid source path /.../Datafiles
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I have just finished installing Grid infrastructure and start to install RAC database 11gR2.
I have downloaded 2 files from https://edelivery.oracle.com as below:
V17530-01_1of2
V17530-01_2of2
When I start to install the RAC database using the above 2 files but get the error below:
[ora11g@rac1 V17530-01_1of2]$ ls
database
[ora11g@rac1 V17530-01_1of2]$ cd database
[ora11g@rac1 database]$ ls
doc install response rpm runInstaller sshsetup stage welcome.html
[ora11g@rac1 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 5028 MB Passed
Checking swap space: must be greater than 150 MB. Actual 2224 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-03-06_11-08-23AM. Please wait ...
Invalid source path '../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles' specified for unzip. Unzip command failed. Please check oraparam.ini and specify a valid source path.
: No such file or directory
[ora11g@rac1 database]$
As we see the output above, the error is Invalid source path /../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles.
My questions are:
First, are the files V17530-01_1of2 and V17530-01_2of2 the correct files for 11gR2 RAC database ?
Second, how to solve the issue "Invalid source path /../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles" ?
Thanks.Folks,
Hello. thanks a lot for replying.
I go up one level ( / ) and run the command again as below:
[root@rac1 /]# du --max-depth=1 -h
Its output:
8.0K ./srv
83M ./sbin
9.0G ./tmp
4.9G ./usr
157M ./var
20M ./boot
8.4M ./bin
3.3G ./u01
252M ./lib
8.0K ./selinux
12K ./mnt
16K ./lost+found
164M ./dev
0 ./misc
29M ./lib64
8.0K ./u02
100K ./tftpboot
12K ./media
0 ./proc
248K ./root
0 ./sys
117M ./etc
3.3G ./home
3.5M ./opt
25G .
[root@rac1 /]#
As we see the output above, it seems that 25GB disk space is used and /tmp occupies 9GB.
I have remove the files under /tmp but after reboot OS, the same files come up again under /tmp.
Some folks use 12GB for each of their VMs and is enough to install Grid and RAC Database.
My questions are:
Why my VM with 30GB disk space does not have enough disk space to install RAC database ?
Can any folk help to solve the issue ?
Thanks. -
Clonimg Standalone Database to RAC Database
Hi Gurus,,
Database: 10.2.0.4
Os: Linus 2.6
We have standalone and RAC database running.
We want to clone standalone database to RAC datrabase.
Is it any way to do this .
Thanks .Do you mean that you want to convert a single instance to RAC db?
http://lmgtfy.com/?q=how+to+convert+single+instance+db+to+rac+db
HTH
Aman.... -
Implementing RAC database backup through RMAN and grid control.
Hi...
plz... can any one give me good document (metalink documents id or else) to implement RAC database backup through RMAN. and also grid document...user8943492 wrote:
Hi...
plz... can any one give me good document (metalink documents id or else) to implement RAC database backup through RMAN. and also grid document...Read below links
http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/backup.htm#i443637
http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/rmanops.htm#i474611
http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/toc.htm -
Stop and start database for cold backup
Hi,
Database :Oracle 10g R1
OS : Red hat 3
I have a RAC database with 2 nodes.
I build this script to make a cold backup of the database. (I will put it in the cron tab).
My question is the SRVCTL will work in this scripts??
# ***** COLDBACKUP ORACLE DATABASE ON LINUX *****
DIRECTORY=/u02/backup/script/; export DIRECTORY
cd ${DIRECTORY}
# ***** SHUTDOWN THE DATABASE *******
export oracle_sid=RCDB
srvctl stop database -d RCDB
# *****cold backup for "RCDB" database on 13-FEB-07 ... *****
# ***** COPY FILES *****
# Redo logs
cp /u02/oradata/RCDB/redo01.log ${DIRECTORY}
cp /u02/oradata/RCDB/redo07.log ${DIRECTORY}
cp /u02/oradata/RCDB/redo03.log ${DIRECTORY}
cp /u02/oradata/RCDB/redo08.log ${DIRECTORY}
# Datafiles
#*********START UP DATABASE AND SERVICES********
srvctl start database -d RCDB
exit
Message was edited by:
ASkika
Message was edited by:
ASkikaI need to put a quick policy backup ... and cold
backup it's what I use and it works.And reduces the availability of your cluster.
The problem about RMAN is that we never use it. I
have to learn about it to make scripts to test....
and this will tack me 2 or 3 days...I'd assume that installing RAC didn't go overnight, so why underfund the crucial part of any database system, the backup?
There's even a step by step guide for backup on the Getting Started: DBAs page.
Samples (and changes) on the latest version of RMAN can be found for example in RMAN Enhancements.
Or take a look at this Oracle Magazine article:Faster Backup, Faster Recovery
Backup and Recovery Basics in the user documentation may also be a good starting point.
C. -
RMAN backup in ORACLE RAC database
Hi there,
We are using RMAN backup strategy for taking backups from one node(eg.node1).Database is RAC database, version 9.2.3. and OS is Solaris 5.10.
this is the configuration which we use, as follows:
Connecting to Prod.Database using catalog database.
rman catalog=rman/rman@CATDB target=sys/oracle@PRODDB(node 2).
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 30;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/rmanback/_%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 5;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/rmanback/CMWPROD_%s.bak';
CONFIGURE CHANNEL 2 DEVICE TYPE DISK CONNECT 'SYS/oracle@PRODDB(node2)';
CONFIGURE MAXSETSIZE TO 7 G;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/oracle/9.2.3/dbs/snapcf_CMWPROD1.f';
As the above config shows RMAN is connecting to PROD DB (node 2). But we need to take backups (datafiles and as well as archive logs) from two nodes (i.e from node 1 and as well as node 2).
Is there any possibility for taking backups from two nodes?
Thanks,
Balu.Duplicate thread
RMAN configuration in ORACLE RAC database
Khurram -
Hi,
We have configured a RAC production system and an standalone standby database.
Last week, we had trouble with our ESS subsystem and we have to failover.
Rigth now we solve the problem with the ESS subsysytem and the RAC enviroment is up and running but the database is no updated because is at the moment that we had the problem.
So, we want to back to the initial configuration (RAC primary database and standalone standby).
I want to know is this can be possible with only a backup/restore? (standby database cold backup and then restore the database over the RAC environment) and then reconfigure our standby database?
Or which steps should we follow to do this?
Thanks in advance,
GeraldMy question is:
Is it possible to setup a standby database on a RAC environment with 2 nodes? I've searched through MOS but didn't find any information about that...Yes, it is possible. Refer this
*Data Guard Physical Standby 11.2 RAC Primary to RAC Standby using a second network [ID 1349977.1]*
MAA / Data Guard 10g Setup Guide – Creating a RAC Physical Standby for a RAC Primary
http://www.oracle.com/technetwork/database/features/availability/maa-wp-10g-racprimaryracphysicalsta-131940.pdf
http://wiki.tapriuneclak.com/index.php?title=Oracle_-StepBy_Step_of_Configuring_Oracle_11gR2_(11.2.0.1)_RAC_to_RAC_Dataguard
http://davidalejomarcos.wordpress.com/2010/02/17/creating-a-3-node-rac-database-as-standby/ -
Hi All
I'm attempting a full restore of a SharePoint 2010 farm, single server housed on the same server as the SQL server that holds the SharePoint databases. Backup and restore is via Backup Exec, the backup job was carried out via BE 2012 and the Restore is via
BE 2104. The server I'm attempting to restore to has also been restored by using the system state and a copy of the drives from the original source server - hence its pretty much a clone of the source server.
Irrespective of the account used to run the restore job I'm seeing repeated failures with the error "Unable to lock the Microsoft SharePoint Farm Topology. You must unlock the farm topology and retry the job".
By restoring the admin databases directly by taking a SQL backup of the source databases and restoring these to the server I'm attempting to restore SharePoint to I have succeeded in bringing the SharePoint admin console back to
life, none of the sites are in a locked state, and they can be locked and unlocked both via the admin console or via Powershell. Locking and unlocking the makes no difference.
Any ideas where I can look to from here, could the above error be a cryptic Backup Exec error that doesn't actually mean what it says?Hi,
Reviewing the DPMRACurr log on the target server during the Date/Time of restore may assist with potential paths to why the job is failing. The logs can be found in the
following path on the target server <DPM Install path>/Program Files Microsoft Data Protection Manager/DPM/Temp
The logs may uncover why we face the current issue. For example the following “ATTACH " – Failed <and also reason why>
Also the DPM server MSDPMCurr log during the Date/Time of restore may also assist with the issue you face. For example the following may be seen “MountDatabaseFailed”
Also note the below process is carried out with the method of restore which was used.
DPM restores the DB to the destination SQL server once the DB is attached, then the restore process is complete and now will be SharePoint front end server connecting to
that DB using the account that was setup with configuresharepoint.exe -enablesharepoint protection. That account needs permissions to connect to that database. The attach phase itself is using the system account from DPMRA process on the local SQL Server.
If you identify the issues are permission related first ensure
the DPMRA service [logon account] has access within SQL for the SQL instance that we are restoring to this account will need DB creator for the following system DB master.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II.
[MSFT] This posting is provided "AS IS" with no warranties, and confers no rights." -
Creating RAC database thru RMAN hot backup
Hi Guys,
I am having ERP PROD database on 2 nodes 116 and 117(RAC) server. We have a scheduled RMAN HOT backup of this database
WE also have ASM implemented.
We have another 2 servers named 36 and 37(RAC and ASM) which has ERP Test Database and the thing is that we want to refresh this
test database using ERP PROD RMAN backup.
Can someone please post the proper steps to restore the RMAN backup to ERP Test database as ASM is alos there.
As it is little urgent for us.
help will be appreciated.
Regards,
Milan Rathod1. take the backup of production database
rman connect target /
backup as compressed backupset database plus archivelog format '/u01/db/backup/%d_%I_%s_%T';
move the backup to test server (same location /u01/db/backup/ bcoz rman checks for backupset in the same location only)
add the below two lines in the test database-- initTEST.ora file
comment cluster_ parameters in initTEST.ora file
eg:-
DB_FILE_NAME_CONVERT = (+EBAOUATDATADG1/prod/,/u01/db/app/admin/test/)
LOG_FILE_NAME_CONVERT = (+EBAOUATDATADG1/prod/,/u01/db/app/admin/test/)
check the connectivity between prod and test database.
from test
$tnsping PROD
from prod machine
$tnsping TEST
in test server
startup nomount
rman target sys@proddb auxiliary /
duplicate target database to test;
after completion of duplicate/clone step convert the single instance test to rac instance by uncomment the cluster_ parameters in initTEST.ora parameter
startup mount the second node in TEST
ALTER DATABASE ENABLE PUBLIC THREAD 2 ;
alter database open;
hope, this will helps you.
Good Luck
Maybe you are looking for
-
Invoice number - in the return order purchase order tab page
Hi User needs invoice number in the PO Tab of the return order when Created with reference to invoice . usually PO number of the Sales order will be comming . what needs to be done for this Regards Anil
-
Dear All, I have set delivery complete indicator in customizng for Plant in Inventory Management and also in Purchase Order still I am able to post multiple material documents with reference to the same Purchase Orde Item. What do this delivery compl
-
How do I sort by name in iTunes 11.1.1?
When I click the Name column in my iTunes library, it used to sort my ENTIRE music library from A to Z or from Z to A. Now it will alphabetically sort ONLY the 29 songs visible in the column when I'm in the Songs tab. Why? Am I missing something?
-
Facebook video call don't work ?
hi i just download apple os marvericks , and i find problem with video call in facebook , somebody can help me please to restart my video call en facebook
-
Capture secondary sales in SAP
Hi we are working for a pharma client -- here sales done from company to Stockistis called as primary sales which we capture in the form of sales order. their authorised stockist sells items to medical stores ( secondary sales) here they want to capt