Backup: How to set Bunring folder to use an external HDD

For Backup with OS X resources only i'd like to use burning folder. Instead of limited DVD capacity i'd like to point the burning folder to my iomega drive. How can i do that?
Simply drop and drag the burning folder to my iomega drive would just save the alias but not the dynamic content of the folders i want to backup. I am sure someone found a smart way to do backups... so pls. let me know
Regards,
Harpo

I, too, am interested in how to accomplish something like this. However, I would like to be able to "burn" my burn folder to a flash drive instead of a disk. For all the same reasons that a " +burn disk+" is great for CDs and DVDs, it would be, too, for other media.
I suspect this requires a change to the burn-disk function, but wouldn't think that it is too big - most of the heavy lifting is already done.

Similar Messages

How to set swing to support using vrml/external/browser ?

When doing applets with AWT to call vrml/external/browser.getbrowser, it works. But if update to use swing instead of awt, applets always cannot say: java.lang.NoClassDefFoundError: vrml/external/Browser.
The html file containing this applet is converted by command : java HTMLConverter **.html .And also using java1.3.1plug-in.
But if removing java plug-in and add ---ARCHIVE="Swing.jar"---- into **.html source code without using java HTMLConverter. The applet works.
While, this way can let applet work, but thus, the applet cannot connect to mysql database.
So, anyone knows how to set up swing in applet when using converted **.html with javaplugin? ???
Thanks so much!!!!

Hi David,
Need more info:
Version of Crystal Reports are you using?
Visual Studio version?
Try with this:
The following C# code demonstrates the use of the ExportToStream method:
ReportDocument report = new ReportDocument();
report.Load("c:\\temp\\test.rpt");
ExportOptions options = new ExportOptions();
options.ExportFormatType = ExportFormatType.PortableDocFormat;
options.FormatOptions = new PdfRtfWordFormatOptions();
ExportRequestContext req = new ExportRequestContext();
req.ExportInfo = options;
Stream s = report.FormatEngine.ExportToStream(req);
Response.ClearHeaders();
Response.ClearContent();
Response.ContentType = "application/pdf";
s.Seek(0, SeekOrigin.Begin);
byte[] buffer = new byte[s.Length];
s.Read(buffer, 0, (int)s.Length);
Response.BinaryWrite(buffer);
Response.End();
Regards,
Shweta

How to set share folder for mac 8.6 in windows

I know how to set share folder for mac 8.6 in windows xp. I installed the NetBIOS. But i still can not found windows share file in mac 8.6. Need to install 'DAVE'?

I want to setup file sharing. Then, I will setup share printer for mac8.6. I tried to config File Sharing control panel. But it do not scuccessful. Do have you way to solve file sharing and share printer problem. Not use NetPresenz.
I follow the website to setup file sharing. But I is not successful.
the website:
http://homepage.mac.com/car1son/os9xnet_nfilesharing.html
I go to appletalk control panel to connect via choose ethernet bulit-in. It appear a error. The error is 'An error occurred attempted to use Ethernet bulit-in. Make sure your network connection are correct.'
Thank you very much for your help.

How to set field type choice using csom (c#)

I have a field type: Choice (menu to choose from) which is not multichoice. How do I set a value?
I have found code for multiple choice but it doesn't seem to work for single choice.

Hi,
The following code snippet for your reference:
newListItem["ChoiceFieldName"] = "ChoiceValue";
newListItem.Update();
clientContext.Load(newListItem);
clientContext.ExecuteQuery();
If you are assigning a Value which is not in the Choice Column, You need to create a choice value then assign it to the item.
More information is here:
http://sharepoint.stackexchange.com/questions/124999/how-to-set-field-type-choice-using-csom-c
Best Regards
Dennis Guo
TechNet Community Support

I'm new to using iCloud and couldn't find the answer to: how to set my calendar to use the 24 hour clock. Thanks all.

?? I'm new to using iCloud and couldn't find the answer to: how to set my calendar to use the 24 hour clock. Thanks all.

Thanks, David. i thought i had it set correctly in Preferences in L&R. Being i was wearing my suspenders and belt at the same time i went back to L&R, cleared what was there and re-entered same to include unchecking and rechecking Time Format fgor 24-hour time. It works now. Thanks again.

How to set up Oracle Alerts using Lotus mail

Hi there
Anyone there knows how to set up Oracle Alerts using Lotus mail

Hi All. We are looking to install 64-bit Oracle 11g
on 64-bit SUSE Linux Version 10 SP1. We would like to
start up with a 16GB SGA and possibly increase to 50GB. How you calculate you need to start database with 16 GB SGA , and latter need to increase it to 50 GB ?
Can anyone help us with a list of rpms and
kernel settings we would need to get started? ThanksCheck following link for rmp and kernel parameters
http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/pre_install.htm#sthref85
- Virag Sharma
http://virag.sharma.googlepages.com
http://viragsharma.blogspot.com

How to set XPoweredByHeaderLevel to NONE using wlst

How to set XPoweredByHeaderLevel to NONE using wlst (by default the value is SHORT).
I mean, I have created a domain using wlst.
Now I want to set XPoweredByHeaderLevel of WebAppContainerMBean to NONE using wlst.
It will be helpful if a sample python(Jython) script is provided.
Please help.

Here is a quick Jython example of how to do what you want:
#assuming you already have correct imports for wlst module
#connect to the AdminServer using proper credentials and host information
wlst.connect(username, password, host_info)
#extract domain name
domainName = wlst.domainName
#start an edit session and navigate to the WebAppContainerMBean
wlst.edit()
wlst.cd("/WebAppContainer/" + domainName)
wlst.startEdit()
#set the value of the XPoweredByHeaderLevel attribute to "NONE"
wlst.cmo.setXPoweredByHeaderLevel("NONE")
#activate the change
wlst.activate()

How long would an ipod last as an external HDD?

Using the ipod 5th gen as an HDD for a computer, how long would it last, compared to an external HDD, before it died?
I'm kinda interested as to how long holds up

pk para wrote:
Using the ipod 5th gen as an HDD for a computer, how long would it last, compared to an external HDD, before it died?
I'm kinda interested as to how long holds up
It depends on how often you'd be writing info to the hd, but my guess would be not long!
The iPod hd isn't robust enough to use in this manner (where it needs to keep spinning up a great deal).
Plus, a restore is very often a cure for iPod ills and that means a total loss of any data stored on it.
With the price of ext hd as cheap as they are nowadays, in my view it just isn't worth using an iPod in this manner.

How to display Contribution Folder Name using Idoc Script

Hi, could ypu please tell me how can we display Contribution Folder name using Idoc script by passing dCollectionID. Appreciate your help on this. Thank you
Regards,
Ashok

You should be able to get it directly as dCollectionName, but might have to execute a query to fill in the result set first: select dCollectionName from COLLECTIONS where DCOLLECTIONID = ?

How to set value in selectOnemenu using binding

hi all.
i have bind htmlSelectOneMenu. it contains some value. I want to set or display a value after a process.
How to change value
i have tried using setValue method of both binding property and value property of htmlSelectOneMenu.
Same issue is with InputTextArea. how to set value in it via code(RowSelectionListener of icefaces)

Balaji wrote:
hi all.
i have bind htmlSelectOneMenu. it contains some value. I want to set or display a value after a process.
How to change value
i have tried using setValue method of both binding property and value property of htmlSelectOneMenu.
Same issue is with InputTextArea. how to set value in it via code(RowSelectionListener of icefaces)The html SelectOneMenu is bound to a value of a backing bean. You have to change the value of that backing bean, not the JSF component directly. JSF takes care of updating the model, you shouldn't be touching it unless you know what you are doing.

How to set JMS clients to use JVM Invocation layer

Hi,
I'm not sure if this JBoss specific (but I'm assuming it's not) so I'll be asking it here. How can I set my JMS clients and Message-Driven Beans to use JVM Invocation layer since the clients and queues will reside in the same JVM.
Thanks in advance.

May be that explains why I couldn't successfully integrate ActiveMQ with JBoss. I was using the 3.0 version. I'll try again once I find the time.
Anyway, do you know how to set JBoss JMS clients and MDBs to use JVM invocation or transport layer instead of UIL2?
I'm not sure if what I've done is correct But here's what I've done.
For jvm-il-service.xml, I changed the JNDI reference from "ConnectionFactory" to "JVMILConnectionFactory" since the default service uses "ConnectionFactory". Then I used that reference as my JNDI look up in my JMS client. I'm just not sure how to do this with MDBs. I think I should add an entry in the ejb descriptor file but I need someone to confirm.
Thanks.

How to set a folder option for individual folders

This was not an issur for previous Mac OS, but for Marvericks I seem not to be able to save a folder option for individual folders. So, when I change a view option, say, to "View as Icon" for a folder and close it, all other folders also show in the View-as-Icon mode. Is this a bug? Or, am I missing anything? I would want to open a particualr folder in a particular view option. How can I do such?

Use JTextField
http://java.sun.com/docs/books/tutorial/uiswing/components/text.html
And please post Swing questions in the Swing forum.

How to set the sampling interval using DAQ device?

Now I have a capacity sensor and a 24 bit DAQ device (http://www.mccdaq.com/usb-data-acquisition/USB-2404-10.aspx).
The DAQ device has the maximum sampling rate of 50kS/s . My question is how to set the interval of data collection. For example, if I set the sampling rate to 2000, in continuous sampling mode, I use DAQmx read.vi in a while loop and set the 'number of samples per channel' to 100. I want to plot these data as a function of time by using a XY graph and also save these data. So I add a 'Mean' function to get the average of the 100 samples per each loop (than means, there are 20 data output per second). But when I set the 'number of samples per channel' much smaller (to get more data per second), there are some problems. It seems that the program cannot read so many data and get the average at a higher frequency. I don't know where the problem is. All in all, how to collect data more frequently?Maybe I didn't express my question clearly. I'll upload a simple program later if necessary. Thanks.
Solved!
Go to Solution.

Another question is in continuous mode, NI DAQmx uses Samples per channel to determine the buffer size. But according to the website you specified, it says if the acquisition is continuous (sample mode on the DAQmx Timing.vi is set to Continuous Samples), NI-DAQmx will allocate a buffer according to the following table. And for sample rate between 100 - 10,000 S/s, the buffer size is 10 kS. So if I set the sample rate to be 5000 S/s, and set the Samples per channel to be 20000, then what exactly the buffer size is? 20 kS or 10 kS?
Thanks.

How to set JavaBean in JSP using JavaScript function

Hello,
When a user clicks on an item, I want to execute a JavaScript function. Within that function, I want to set specific JavaBeans (<jsp:setProperty... />) within my JSP page.
Can anyone tell me how to do this or where I can find examples on how to set JavaBeans in a JSP page using JavaScript?
Thanks.
Pat

try this:
your.jsp
<html>
<SCRIPT>function buttonClick()
{document.compform.submit();}
</SCRIPT>
<body>
<form name=compform method=post action='your.jsp'>
<%
//write your code which you want to execute once the button is submitted
String submit;
submit=request.getParameter("mysubmit");
if ((submit != null) && (! submit.equals("")))
%>
<input type=hidden name=mysubmit value="submit">
<input type=button value=add onclick='buttonClick()'>
</form></body></html>

How to set style !important using javascript??

i can set an items width using js
page_item.style.width = "400";
how do i incorporate the "!important" flag in this statement?

Hi Craig,
Here's the only blurb I could find on this:
http://msdn.microsoft.com/library/default.asp?url=/workshop/author/dhtml/reference/properties/important.asp
Notice the "Scripting: N/A" bit at the top.
I use this site a lot - not because I'm particularly keen on MS/IE but because at the bottom of each entry you get confirmation of whether or not the setting/attribute/etc is standard or not and the pages are kept up to date.
I have to say that this is only the second time I've come across someone trying to use this. The first time we just decided to leave it. I can see the importance of using it to stop someone overriding styling, but as I mentioned above, it is possible to create an entire script tag using javascript and, therefore, you can override it. Seems silly to me, but there you go!
It would also be better, in my view, if they had used a better word for this setting - something like java's "final" - as, the first time I saw it I took it to mean "make more bolder" or "highlight it" or somesuch thing.
Regards
Andy

Backup: How to set Bunring folder to use an external HDD

Similar Messages

Maybe you are looking for