Backup in SOA 10g
Hi,
I want to take the backup of SOA 10g of my server.
Can anyone guide me on this.
I have gone through the admin guide but its not quite helpful.
Please guide
Rajan,
It depends on which type of backup you are looking..
Check this blog on various types of backup
http://orafusionmiddleware.blogspot.com/2010/06/soa-backup-recovery-strategies.html
Regards,
Suneel Jakka
Similar Messages
-
Error Deploying BPEL process in Oracle SOA 10g
Hi All,
Error Deploying the jar file in Oracle SOA 10g.
Error no : 500
The server encountered an internal error or misconfiguration and was unable to complete your request.
Following Information from log
[New log entry] The BPEL process "InInvoice", revision "1.0" has not been loaded. Either the process was not initialized properly or the process
has been disabled.
[New log entry] Please consult your administrator regarding this error. The application server logs may provide more information regarding this error
[New log entry] 11/05/27 02:48:08 at com.collaxa.cube.engine.deployment.DeploymentManager.getProcess(DeploymentManager.java:556)
[New log entry] 11/05/27 02:48:08 at com.collaxa.cube.engine.deployment.DeploymentHelper.lookupProcess(DeploymentHelper.java:258)
[New log entry] 11/05/27 02:48:08 at com.collaxa.cube.engine.deployment.DeploymentHelper.getContentFile(DeploymentHelper.java:123)
[New log entry] 11/05/27 02:48:08 at com.collaxa.cube.ejb.impl.BPELProcessManagerBean.contentFileExists(BPELProcessManagerBean.java:472)
[New log entry] 11/05/27 02:48:08 at sun.reflect.GeneratedMethodAccessor25.invoke(Unknown Source)
[New log entry] 11/05/27 02:48:08 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[New log entry] 11/05/27 02:48:08 at java.lang.reflect.Method.invoke(Method.java:585)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.ThreadState.runAs(ThreadState.java:705)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
[New log entry] 11/05/27 02:48:08 at ProcessManagerBean_RemoteProxy_4bin6i8.contentFileExists(Unknown Source)
[New log entry] 11/05/27 02:48:08 at com.collaxa.cube.ws.soap.SOAPProviderHelper.copyProcessFile(SOAPProviderHelper.java:284)
[New log entry] 11/05/27 02:48:08 at com.collaxa.cube.ws.soap.SOAPProviderHelper.doGet(SOAPProviderHelper.java:487)
[New log entry] 11/05/27 02:48:08 at com.collaxa.cube.ws.soap.oc4j.BPELOC4JServlet.doGet(BPELOC4JServlet.java:190)
[New log entry] 11/05/27 02:48:08 at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
[New log entry] 11/05/27 02:48:08 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
[New log entry] 11/05/27 02:48:08 at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
[New log entry] 11/05/27 02:48:08 at java.security.AccessController.doPrivileged(Native Method)
[New log entry] 11/05/27 02:48:08 at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
[New log entry] 11/05/27 02:48:08 at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:644)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
[New log entry] 11/05/27 02:48:08 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
[New log entry] 11/05/27 02:48:08 at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
[New log entry] 11/05/27 02:48:08 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303
[New log entry] 11/05/27 02:48:08 at java.lang.Thread.run(Thread.java:595)
Error While Deploying Using ant script.
BUILD FAILED
/home/c_lprove/sridhar/InInvoice/build.xml:81: A problem occured while connecting to server "xxxx.yyyy.com" using port "11745": <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>500 Internal Server Error</TITLE>
</HEAD><BODY>
<H1>Internal Server Error</H1>
The server encountered an internal error or
misconfiguration and was unable to complete
your request.<P>
Please contact the server administrator,
[email protected] and inform them of the time the error occurred,
and anything you might have done that may have
caused the error.<P>
More information about this error may be available
in the server error log.<P>
</BODY></HTML>Yes it is having a receive activity , it receives the cXML from Ariba Adaapter. I checked the adapter it is up.
I generated the jar and deployed through BPEL console still i get the same error.
I got the below error
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log. -
How to install SOA 10g on Windows 7 64-bit platform?
Hi Friends
How to install SOA 10g on Windows 7 64-bit platform ?
I've downloaded the 64-bit version downloadable from OTN and able to run the irca.bat on DB 10.2.0.3 however the SOA Installer fails at BPEL Config Assistant step with errors :
deploy-applications:
Deploying Oracle BPEL Process Manager ...
Copying 1 file to C:\SOA134\bpel\system\services\lib
Copying 1 file to C:\SOA134\bpel\system\services\lib
Copying 1 file to C:\SOA134\bpel\system\services\lib
Updating jar: C:\SOA134\bpel\system\services\lib\orabpel.ear
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://<domain name>:6003/oc4j_soa -script C:\SOA134\bpel\system\services\install\ant-tasks/bpel_deployapps.txt
Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.Hi,
We know now why SOA Installer fails...
Now we need to know why you can not start OC4J properly. What do you see in the log files?
https://forums.oracle.com/forums/ann.jspa?annID=893
Cheers,
Vlad -
File adapter polling frequency is not consistent in SOA 10g!
Friends,
I have used file adapter for polling files in a service in SOA 10G env. with polling frequency 3600 secs. However, i have noticed file polling is not happening at 60 mins interval, instead some times files getting polled in less than 30 mins but again after sometime its polling correctly in 60 mins interval. I am not sure what could be the reason but i need a solution urgently. Please help!Could be the managed servers in the cluster are not in sync.
I faced DB JCA adapter sync issues because of Oracle soa suite bug.
You could check whether any sync issues are there with File adapters. -
SOA 10g: Dynamic Host Name and Port in FTP Adapter
Hello All,
I am using GET operation in FTP Adapter. I wanted to make Hostname,portName,Username and Password Dynamic.
Pls suggest how to achieve this in SOA 10g.
thanks,
Abor http://blogs.oracle.com/adapters/2010/04/changing_the_connection_factory_jndi_dynamically_in_ftp_adapter.html
the make the jndi dynamic, but you still have to setup all the jndi lookups before you can dynamically can change them -
SOA 10g JMS adapter does not pick up large messages in Oracle AQ
I am using SOA 10g 10.1.3.4 MLR #9. When I enqueue a large JMS message ( of type SYS.AQ$_JMS_TEXT_MESSAGE ) into the AQ from SOA 11g it goes into the TEXT_LOB portion of the USER_DATA column in AQ. In addition to this GROUPID and GROUPSEQ do not seem to get set. When that happens, my JMS adapterfrom SOA 10g does not seem to dequeue the message. But if I enqueue the same message using sql and set the GROUPID and GROUPSEQ my JMS adapter from 10g picks up the clob message.
How do we make the 10g adapter always pick up the large message in TEXT_LOB? I don't have this problem when the message is small because it goes into TEXT_VC field instead of TEXT_LOB field.We are having this problem and have not figured it out yet. We need help. An oracle SR is opened but no progress from Oracle yet. I need to get some traction on this so anyone's help is appreciated. Our suspicion is that the AQ client in the wls 10.3.1 is incorrectly choosing to put the xml payload in TEXT_LOB even though the character size is less than 4000.
Here is a summary of our observations....
Today we did some testing with our old 6.3.1 OSM environment and our new 7.0.2 environment. We tested each against our QA1 environment and then our QA2 environment. Scenrio 1 is our problem. Scenario 2,3,and 4 all behave similar to each other. Why does Scenario 1 behave differently. It is causing AIA a problem when it dequeues the message.
Scenario 1:
We pointed our 7.0.2 OSM/Weblogic 10.3.1/Out of the Box AQ (which is part of our QA1 environment) to send messages to the AIA AQ table in our QA1 environment. The AIA database uses ALT32UTF8 character set. We don't know what character set the 7.0.2 OSM/Weblogic/AQ uses. Wehn we sent messages to the AIA QA1 table we saw that everything under TEXT_LEN 1000 went to TEXT_VC, Over 1000 went to TEXT_LOB. This is causes AIA to throw an exception if the message is over 1000 when it dequeus the message, because it thinks it shoudl look in the TEXT_VC which is null for AIA.
Scenario 2:
We pointed our 7.0.2 OSM/Weblogic 10.3.1/Out of the box AQ (which is part of our QA1 environment) to send messages to the AIA AQ table in our QA2 enviornment. The AIA database uses UTF8 character set. We don't know what character set the 7.0.2 OSM/Weblogic/AQ uses. When we sent messages to the AIA QA2 AQ table we saw that everything under TEXT_LEN 4000 went to TEXT_VC. Over 4000 went to TEXT_LOB. This is fine for us.
Scenario 3:
We pointed our 6.3.1 OSM/Weblogic 9.2.1/Custom AQ Solution (which is part of our QA2 environment) to send messages to the AIA AQ table in our QA2 environment. The AIA database uses UTF8 character set. We don't know what character set the 6.3.1 OSM/Weblogic/AQ uses. When we sent messages to the AIA QA2 AQ table we saw that everything under TEXT_LEN 4000 went to TEXT_VC. Over 4000 went to TEXT_LOB. This is fine for us.
Scenario 4:
We pointed our 6.3.1 OSM/Weblogic 9.2.1/Custom AQ Solution (which is part of our DEVINT1 environment) to send messages to the AIA AQ table in our QA1 enviornment. The AIA database uses ALT32UTF8 character set. We don't know what character set the 6.3.1 OSM/Weblogic/AQ uses. When we sent messages to the AIA QA1 AQ table we saw that everything under TEXT_LEN 4000 went to TEXT_VC. Over 4000 went to TEXT_LOB. This is fine for us. -
I want my file adapter to poll multiple locations in soa 10g
Hi All
I had a requirement that "I want my file adapter to poll multiple locations in soa 10g".I came to know that in soa 11g it is possible.
I want this to be done in soa 10g.
plz help me.
thanks,
krishnaYou can have pick activity and have separate ftp adapter for each folder, but you will be using the same jndi in all pick activity.
In that way you can have multiple ftp adapter but uses the same jndi by increasing the performance.
User will be configured to a home location, example as below.
say a ftp user "adminuser" is configured to a default folder c:/ftp_files
You can create multiple folders under the same folder like below.
c:/ftp_files/location_a
location_b
location_c
location_d
For each location have a separate ftp adatper, but all of them uses the same jndi while defining the path you have to change according to the above folder.
Let me know how this goes.
- It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
Thanks,
Vijay -
Hi',
We have a BPEL process running in SOA 10G, This picks up data from DB, as the payload is huge we pick 50 records in 1 shot.
Now we are moving to SOA 11G, we presume that we should be able to pick up a bigger payload in SOA 11G.
Can someone please advice me in 11G how much big or times payload can we pick.
Thanks
YatanHi Yatan,
I've successfully tested once fetching the data from the table and wrote a file of the order of 49 MB. As this will be also dependent on the environment configuration, I'd suggest to try once and test by yourself.
Regards,
Neeraj Sehgal -
hi,
can anybody explain how to create JMS queue is implemented in soa 10g.
currently i have configured jms destination, but that is not being displayed while i am configuring the jms adapter in the jdeveloper.
i am first trying to create a file based jms.
thanks in advanceWhat is the nested stack trace for the error mentioned? If you don't see any make sure you enable debug logging for adapters...
CCI Local Transaction COMMIT failed due to: ERRJMS_COMMIT_FAIL.
Unable to commit transaction. -
Hi
How to take up Hot backups (On-line backup) in Oracle 10g Release 2 in Windows environment.
Pls give me the link or steps for do the hot back-ups.
ThanksI think you are test ENV?
Did you archive the current log file which i mentioned in the earlier post
if so and if you the archived log
Shutdown the DB
Rename the file you copied
move the D:\oradata\*.dbf(whihc was backed up by you)in the original directory and
from sqlplus issue
SQL>startup mount
SQL>recover database
this hould work
But make sure you have the backup before deleting/renaming the the file you backed up by HOTbackup -
Quartz Scheduler in Oracle SOA 10g clustered environment
Hi,
I was able to successfully test the usage of Quartz scheduler in our Oracle SOA 10g dev environment. Our dev is single instance where as our Test and Prod are clustered. I would like to know if the scheduler works in clustered environment. I wasn't able to find any documentation specific to Quartz for Bpel. If it can be done can you provide some guidance.
I really appreciate your help
Jagan.Jagan
The schedulers do work on cluster environment. The trick is that every node has its oc4j containers, so you will need to deploy the scheduler process to every node in the cluster.
Suppose you have two nodes, and have a requirement to run certain process every two hours. You schedule the process in DEV environment to run every two hours. But in cluster you will specify to run every four hours on both the nodes. In simple explanation, node 1 will fire the process at 0,4,8, ... hours and node 2 will fire at 2, 6, 10, ... hours. So, the result is that your process is still running every two hours.
Hope this will help ... -
AIA 3.0/11g installation on SOA 10g(10.1.3.4) - OAS
Is it possible to install AIA 3.0/11g in the SOA 10g (10.1.3.4) edition, if yes please point me towards any installation guides....
I understand 11g releases are more oriented towards weblogic, so i dont find the installation guides of 11g very useful.
To be more precise, I tried installing AIA 11g, onto a SOA server(10.1.3.4),the problem was in the third step where "SOA Server Details" are given, I'm not able to connect to my SOA server.
These r d values i gave
Admin Host Name:mildh0155
Admin Port:6003
Domain Name:xxx(i thot this as the instance name,if im wrong pls correct as to which name has to be entered here incase of the OAS)
Admin User:0c4jadmin
Admin Password:xxxxxxx
The "Managed Server" waits for a minute and then becomes "Cannot connect to Server"
Pls help...Thanks in advanceHi Venkatesh,
You can't install AIA 3.0 on SOA Suite 10g since AIA 3.0 leverages on same SCA based components which can't be deployed on SOA Suite 10g.The domain name that is expected while installing AIA 3.0 is weblogic server domain name which doesn't have an equivalent in Oracle Application server and the port is the weblogic admin server port not opmn request port.
Hope this addresses your query. -
I need to store a schema in mds in soa 10g.
Hi Gurus,
Kindly help out with the present situation.
i need to store the schema which is used in different process in the mds in soa 10g. can any one provide some steps or docs related to setting up of mds in soa 10g?
Help is greatly appreciated.
Regards,
Venky.As far as I know, there isn't any MDS in SOA 10g. This concept was introduced in 11g version.
-
Need idea : Integration of CRM On Demand web services with Oracle SOA 10g
Hi Al,
Can anyone have any idea on integration of CRM on Demand Web service with Oracle SOA 10g specially BPEL 10g.
If you have any idea please share with us. Or if you know any good link on the same... please let me know.....
Thanks in advance
DebarshiAFAIK there is no such mapping available, however you may want to take a look at this Support Community thread that discusses the migration and even gives some samples.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/ -
Concurrent behavior of DB adapter on SOA 10g Cluster
Hi all,
We have currently setup SOA 10g(10.1.3.5.2) cluster.According to Oracle documentation other than File/FTP adapters all other adapters behave concurrently i.e; we can have these adapters in active-active topology in the cluster.
Now we have a built a sample ESB project with inbound DB adapter and two routing rules.One invoking a BPEL process and another creating a File.
We have the DB adapter in active-active mode.Now at runtime when we insert some record into a table polled by the above DB adapter, we find that duplicate BPEL instances are created and duplicate files get created(on both application hosts).
However if I change the active-active topology of the adapter into active-passive topology by inserting clusterGroupId property on endpoint of the adapter then only a single BPEL instance and single File is created.
Please let us know how we can achieve the above with active-active mode of the adapters.
Thnks & Rgds,
MandritaHi Anuj,
Thanks for your response. However when we enabling distributed polling then we find that the behavior is not consistent.
I am explaining the inconsistency below-
When ESB_DT with service-weight=100 is up then ESB to BPEL invocation(SOAP) creates duplicate BPEL instances but when I shutdown that ESB_DT and the other ESB_DT with service-weight = 50 goes up then we find that duplicate BPEL instances are not getting created.
So is this a default behavior i.e; active-active topology behavior is not consistent?
Thnks & Rgds,
Mandrita
Maybe you are looking for
-
Scanjet 4370 installation problem in windows 7 64 bit
I am trying to install my Scanjet 4370 Scanner to tw o different computers, both use Windows 7 OS, with one using 32 bit the other using 64 bit. Icannot get the scanner to fuinction. Currently I am trying to use it on a laptop with Windows 7 64 bit
-
My computer crashed. How do I get the songs off my iPod and onto my iTunes?
I have a second generation iPod Touch. It's an 8GB. I had basically filled it to capacity with music with a few apps and videos on there. Then, my computer crashed. So, after downloading the latest version of iTunes i tried to sync up my iPod and get
-
Is it possible to view on an external monitor while working in DVDSP ??
Is there a way to output DVDSP to an external reference monitor ? This would be really helpful when working on menus/overlays so i can see exactly what it will look like on an external monitor. Thanks
-
there is a toolbar on firefox that includes the word history, that allows you to quickly erase the sites you have visited on the internet; somehow that toolbar has disappeared, as it has once before; how do i get it back so I can erase the list of si
-
How to put disable ipad online
I have put incorrect password in too many times and has now been disabled for over a day. I have attempted to erase ipad through icloud but i have to be online. how to i get online without buying data?