Backup issue
Hello,
We have configured RMAN to take backups (Oracle 10g, AIX, Netweaver 7)
During offline backups, I noticed that RMAN doesn't backup the TEMP datafiles.
However, brbackup still backs them up on disk
Could you please guide me how do I configure brbackup to backup up the temp datafiles also on the tape, where the rest of the backup is being done?
I am not sure about the initSID.sap parameter taht I needt to change for this.
Log:
#FILE..... /oracle/D3W/sapdata1/system_1/system.data1
#SAVED.... bebuykjd 710/746
BR0522I 21 of 21 files/save sets processed by RMAN
BR0284I BRBACKUP time stamp: 2009-11-02 02.02.17, elapsed time: 0:18
BR0502I Normal database backup using RMAN successful
BR0284I BRBACKUP time stamp: 2009-11-02 02.02.19, elapsed time: 0:02
BR0307I Shutting down database instance D3W ...
BR0284I BRBACKUP time stamp: 2009-11-02 02.03.02, elapsed time: 0:43
BR0308I Shutdown of database instance D3W successful
BR0284I BRBACKUP time stamp: 2009-11-02 02.03.02, elapsed time: 0:00
BR0202I Saving /oracle/D3W/sapdata1/temp_1/temp.data1
BR0203I to /oracle/D3W/rmanbackup/bebuykjd/temp.data1 ...
#FILE..... /oracle/D3W/sapdata1/temp_1/temp.data1
#SAVED.... /oracle/D3W/rmanbackup/bebuykjd/temp.data1 #1/1
BR0284I BRBACKUP time stamp: 2009-11-02 03.04.53, elapsed time: 61:51
BR0063I 1 of 12 files processed - 2129.008 MB of 8662.605 MB done
BR0204I Percentage done: 24.58%, estimated end time: 6:14
BR0001I ************______________________________________
BR0284I BRBACKUP time stamp: 2009-11-02 03.04.54, elapsed time: 0:01
BR0202I Saving /oracle/D3W/sapdata1/temp_2/temp.data2
BR0203I to /oracle/D3W/rmanbackup/bebuykjd/temp.data2 ...
One more doubt
All the datfiles (except Tempfiles) are backed up directly on tape.
The following log should expalin how:
BR0202I Saving G:\ORACLE\EBD\SAPDATA5\EBP_2\EBP.DATA2
BR0284I BRBACKUP time stamp: 2009-11-01 21.02.38, elapsed time: 0:00
BR0202I Saving G:\ORACLE\EBD\SAPDATA6\EBPADM_3\EBPADM.DATA3
BR0284I BRBACKUP time stamp: 2009-11-01 21.02.38, elapsed time: 0:00
BR0202I Saving G:\ORACLE\EBD\SAPDATA1\SYSAUX_1\SYSAUX.DATA1
BR0284I BRBACKUP time stamp: 2009-11-01 21.02.39, elapsed time: 0:01
BR0202I Saving G:\ORACLE\EBD\SAPDATA2\EBPXTAB_19\EBPXTAB.DATA19
BR0284I BRBACKUP time stamp: 2009-11-01 21.54.54, elapsed time: 52:15
BR0521I Backup of database file save set piece - piece handle=EBD_bebuxzsx.645_1 tag=BEBUXZSX comment=API Version 2.0,MMS Version 5.0.0.0
But the tempfiles are backed up on the disk itself
Why are the tempfiles also not backed up on piece handle=EBD_bebuxzsx.645_1 tag=BEBUXZSX ?
the parameters in initSID.sap are
backup_dev_type = rman_disk tape_copy_cmd = rman
disk_copy_cmd = rman
tape_address = /dev/nmt0
util_par_file = initPQ1_RMAN_full_offline_weekly.utl
What parameter should I modify to accomplisg the backup of tempfiles on the RMAN utility (Tape drive, I suppose) as well?
Thanks.
Edited by: Gautam Poddar on Nov 3, 2009 7:32 AM
Edited by: Gautam Poddar on Nov 3, 2009 7:41 AM
Edited by: Gautam Poddar on Nov 3, 2009 7:42 AM
Similar Messages
-
Hi-
Looked thru the thread related to my questions and found nothing that applies yet.
Example:
http://social.technet.microsoft.com/Forums/en-US/4e4472b9-8e6f-4fdc-a287-1cc8c0f6de09/windows-2008-r2-backup-fails-with-event-521-error-code-2155348001?forum=windowsbackup
http://social.technet.microsoft.com/Forums/en-US/e8c910f7-f0dd-4613-beae-b98894fb6f23/windows-server-2008-std-backup-fails-constantly-with-error-code-2155348001?forum=windowsbackup
Here are details of the issues....
Backup - OS error - system image:
External disk - USB
Mon - Fri @ 6PM.
Windows SystemState
OS(C:)
Last backup failure...
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
[Critical error WINIMAGE_UNABLE_VSS] Unable to create VSS snapshot
- Additional information: Refer to the log for more details
- Troubleshooting link:
http://kb.backupassist.com/errormap.php?BA2512
The backup operation stopped before completing.
Detailed error: ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try this operation again.
Log of files successfully backed up:
C:\Windows\Logs\WindowsServerBackup\Backup-12-08-2014_04-41-00.log
Log of files for which backup failed:
C:\Windows\Logs\WindowsServerBackup\Backup_Error-12-08-2014_04-41-00.log
NOTE:
The errors logs are not there?
Windows Backup timed-out before the shared protection point was created.
ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try this operation again.
Event Viewer Log:
Sequence of Events...
1.
The Block Level Backup Engine service has successfully started.
2.
Backup operation that started...
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 8/12/2014 4:51:06 AM
Event ID: 521
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: mdnfile.Auxiant.local
Description:
The backup operation that started at '?2014?-?08?-?12T09:41:00.492000000Z' has failed because the
Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed
with following error code '2155348001'.
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
--> Suggestion are to check Virus scanner or consult DPM forum...
3.
OS Job failed with errors...( Backup Assist is 3rd party backup - wrapper round Wbadmin/Win Backup)
Log Name: Application
Source: BackupAssist
Date: 8/12/2014 4:51:51 AM
Event ID: 5634
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Backup job OS backup failed with errors.
Critical error: Unable to create VSS snapshot
Destination: External disk
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
Destination: External disk
Start time: 8/11/2014 6:01:32 PM
End time: 8/12/2014 4:51:29 AM
Duration: 10:49:56.4414784
4.
Backup Assist reports via Win backup - Snapshot in progress
Log Name: Application
Source: BackupAssist
Date: 8/12/2014 4:52:20 AM
Event ID: 5634
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Backup job Data backup failed with errors.
Ultra critical error: Volume Shadow Copy Error 0x80042316 - snapshot set in progress
Destination: Local directory
Start time: 8/12/2014 4:52:10 AM
End time: 8/12/2014 4:52:12 AM
Duration: 00:00:02.7300000
5.
The Block Level Backup Engine service has stopped.
6.
Later...we tried manually stopping VSS and SWPRV services - only VSS had the issue.
WBengine was not running...
C:\>sc stop swprv
SERVICE_NAME: swprv
TYPE : 10 WIN32_OWN_PROCESS
STATE : 3 STOP_PENDING
(STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc query swprv
SERVICE_NAME: swprv
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc query wbengine
SERVICE_NAME: wbengine
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc query vss
SERVICE_NAME: vss
TYPE : 10 WIN32_OWN_PROCESS
STATE : 3 STOP_PENDING
(STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\>sc stop vss
[SC] ControlService FAILED 1061:
The service cannot accept control messages at this time.
Log Name: Application
Source: VSS
Date: 8/12/2014 9:20:33 AM
Event ID: 8225
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
The VSS service is shutting down due to shutdown event from the Service Control Manager.
7.
VSS still having issues here...not stopping!
Log Name: Application
Source: VSS
Date: 8/12/2014 9:42:33 AM
Event ID: 11
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Volume Shadow Copy Service information:
The COM Server with CLSID {e579ab5f-1cc4-44b4-bed9-de0991ff0623} and name IVssCoordinatorEx2 cannot be started.
Most likely the CPU is under heavy load. [0x80080005, Server execution failed]
8.
Not sure why this is started again?
Plus a DCOM timeout...
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 8/12/2014 9:31:13 AM
Event ID: 753
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: mdnfile.Auxiant.local
Description:
The Block Level Backup Engine service has successfully started.
Event Xml:
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 8/12/2014 9:31:43 AM
Event ID: 10010
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
The server {E579AB5F-1CC4-44B4-BED9-DE0991FF0623} did not register with DCOM within the required timeout.
9.
Lots more errors about VSS...repeating Event ID's 11 and 8193...
Log Name: Application
Source: VSS
Date: 8/12/2014 9:42:33 AM
Event ID: 8193
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mdnfile.Auxiant.local
Description:
Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance.
hr = 0x80080005, Server execution failed
. Operation:
Instantiating VSS server
10.
Then, finally stopping again...
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 8/12/2014 9:51:13 AM
Event ID: 754
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: mdnfile.Auxiant.local
Description:
The Block Level Backup Engine service has stopped.
11.
And still repeating 11 & 8193 at this point...as we write up this post.
12.
This was suggested by the Backup Assist - software vendor....
A.)
...for 0x81080101:
"ERROR - The shared restore point operation failed with error (0x81000101)
The creation of a shadow copy has timed out. Try again this operation."
If you receive the above error in your report, we have recently found a registry key which
contains the timeout value set by Microsoft for VSS and found that you can edit this to extend it.
To get to the registry key, open Regedit (Start > Run > Regedit) and browse to:
"HKLM\Software\\Microsoft\\Windows NT\\CurrentVersion\\SPP\\CreateTimeout".
Change value to 1200000 (2*10*60*1000 = 20 mins).
The default for the timeout period is 10 mins so hopefully doubling this will give enough time to
complete the snapshot.
If this isn't present, you'll need to manually enter the registry key. It's a DWORD 32-bit key.
--> NOTE: HAve not done this yet.
B.)
And for 0x80080005...
http://support.microsoft.com/kb/870655/en-gb
Our server does have high CPU load at times...
13.
Another post from technet mentions system volume size - here is our layout below:
A.)
OS/system Disk...
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
Disk 0 Online 278 GB 0 B (System Vol = C: Drive - OS w/ Programs and batch jobs)
Disk 1 Online 2791 GB 0 B * (Data drive - DFS, rsync,etc. run on D: Drive)
Disk 2 Online 1863 GB 0 B (USB 2/3.0 - Enclosure w/ SATA disk = 2GB formatted w/ NTFS.)
DISKPART> detail disk
DELL PERC H710P SCSI Disk Device
Disk ID: CA0DEEA5
Type : RAID
Status : Online
Path : 1
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0100)#PCI(0000)#RAID(P01T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : Yes
Pagefile Disk : Yes
Hibernation File Disk : No
Crashdump Disk : Yes
Clustered Disk : No
Volume ### Ltr Label Fs Type Size Status Info
Volume 1 RECOVERY NTFS Partition 3072 MB Healthy System
Volume 2 C OS NTFS Partition 275 GB Healthy Boot
B.)
Backup disk...
ST320006 41AS USB Device
Disk ID: 801AF48C
Type : USB
Status : Online
Path : 0
Target : 0
LUN ID : 0
Location Path : UNAVAILABLE
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
Volume ### Ltr Label Fs Type Size Status Info
Volume 4 F BACKUPS NTFS Partition 1863 GB Healthy
C.)
NOTE:
Also on disk 0(system Disk) - we have a small OEM partition = 39MB and a Recovery Partition = 3GB.
D.)
Issues with WBAdmin now...
C:\>wbadmin get disks
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2004 Microsoft Corp.
ERROR - A Volume Shadow Copy Service operation error has
occurred: (0x80042302)
A Volume Shadow Copy Service component encountered an unexpected error.
Check the Application event log for more information.
14.
Ran "Check-Disk" -no errors...
C:\>chkdsk
The type of the file system is NTFS.
The volume is in use by another process. Chkdsk
might report errors when no corruption is present.
Volume label is OS.
WARNING! F parameter not specified.
Running CHKDSK in read-only mode.
CHKDSK is verifying files (stage 1 of 3)...
116224 file records processed.
File verification completed.
654 large file records processed.
0 bad file records processed.
0 EA records processed.
76 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 3)...
156676 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
CHKDSK is verifying security descriptors (stage 3 of 3)...
116224 file SDs/SIDs processed.
Security descriptor verification completed.
20227 data files processed.
CHKDSK is verifying Usn Journal...
35628352 USN bytes processed.
Usn Journal verification completed.
Windows has checked the file system and found no problems.
289233919 KB total disk space.
100241492 KB in 85477 files.
57380 KB in 20228 indexes.
0 KB in bad sectors.
226627 KB in use by the system.
65536 KB occupied by the log file.
188708420 KB available on disk.
4096 bytes in each allocation unit.
72308479 total allocation units on disk.
47177105 allocation units available on disk.
15.
There are no backup error logs here - only .etl files...
C:\Windows\Logs\WindowsServerBackup\
Wbadmin.1.etl = 9:42AM on 8/12
Wbadmin.2.etl = 4:51AM on 8/12
Per windows Win troubleshooting:
http://technet.microsoft.com/en-us/library/ee692290(WS.10).aspx
http://blogs.technet.com/b/filecab/archive/2009/09/16/diagnosing-failures-in-windows-server-backup-part-1-vss-spp-errors.aspx
--> Related to Windows backup and not VSS?
2155348001 - 0x80780021 - Windows Backup timed-out before the shared protection point was created.
Should we run the "FIXVSS08.BAT" script - restarts services and re-registers DLL's - does this ever help?
Will this server need a reboot since VSS is in a state and we can't even test backups?
Is there a tool we can use to debug VSS or troubleshoot or OS backups further?
MSReport/Diag, VSS debugging, or another way of helping fix our OS(SystemState/C: drive) backup issues?
Any help is greatly appreciated - thx.
-SP
Scot PichelmanHi Scot,
Sometimes a third party backup application will change the default VSS provider adding VSS writers which causes Windows Server Backup using an incorrect component in doing backup, that's why I suggest to delete it for a test. Anyway you can reinstall it
after testing.
And as you said a high-load CPU could also be the cause of the issue so you may need to first rule hardware effective out.
If issue still exists, please try the steps below as well:
1. Please check DCOM Server Process Launcher service is started.
2. If not, try to change RPC service to run as SYSTEM account. To do this please modify the following key:
Note: Backup the key before edit incase it cause any issue.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\RpcSs\
Find "ObjectName" and change the value to LocalSystem.
Reboot to see if DCOM back to work and if Windows Server Backup starts working. If not, please provide the result if there is any new error occurs.
If DCOM still not work, please compare the content of the following key with a working server:
HKEY_LOCAL_MACHINE\Software\Microsoft\OLE
Edit if there is any difference and make sure you created a backup of the key before editing.
If you have any feedback on our support, please send to [email protected] -
Exchange 2010 SP3 rollup4
4 Server DAG all servers running Windows 2008 R2 (VMs on VMware esxi5.1) 4 databases (2 mailbox, 2 online archives)
Last week 2 databases backup stopped truncating the logs, Mailbox 1 and Online Archive 1. (Mailbox 2 and Online Archive 2 seem to be OK and are backing up OK)
On investigation there are a number of errors in the application log:
Log Name:
Application
Source:
MSExchangeRepl
Date:
05/06/2014 21:50:48
Event ID:
2156
Task Category: Service
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
The log copier for database 'Online Archive 1' could not send a log file to server 'EXCHANGESERVER2' because An I/O error occurred while attempting to access file 'L:\Exchange Logs\Online
Archive 1\E05.log' on source server EXCHANGESERVER1. Error: File not found (-1811)
Event Xml:
<Data>An I/O error occurred while attempting to access file 'L:\Exchange Logs\Online Archive 1\E05.log' on source server EXCHANGESERVER1. Error: File not found (-1811)</Data>
Log Name:
Application
Source:
MSExchange Search Indexer
Date:
05/06/2014 21:50:48
Event ID:
118
Task Category: General
Level:
Warning
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
Exchange Search Indexer has temporarily disabled indexing of the mailbox database Online Archive 1 (GUID = ee385d93-918f-470e-b57b-a87d7e23ed20) due to an error (Microsoft.Mapi.MapiExceptionMdbOffline:
MapiExceptionMdbOffline: Unable to read events. (hr=0x80004005, ec=1142)
Diagnostic context:
Lid: 33865
Lid: 1494 ---- Remote Context Beg ----
Lid: 44215
Lid: 60049 StoreEc: 0x8004010F
Lid: 49469
Lid: 65341 StoreEc: 0x8004010F
Lid: 56125
Lid: 47933 StoreEc: 0x8004010F
Lid: 32829
Lid: 49213 StoreEc: 0x8004010F
Lid: 48573
Lid: 64957 StoreEc: 0x8004010F
Lid: 20057 StoreEc: 0x476
Lid: 1750 ---- Remote Context End ----
Lid: 28777 StoreEc: 0x476
Lid: 20098
Lid: 20585 StoreEc: 0x476
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiEventManager.ReadEvents(Int64 startCounter, Int32 eventCountWanted, Int32 eventCountToCheck, Restriction filter, ReadEventsFlags flags, Boolean includeSid, Int64& endCounter)
at Microsoft.Exchange.Search.RetriableOperations.ReadEvents(ThreadLocalCrawlData unused1, MapiEventManager eventManager, Int64 watermark, Int32 eventCount, Int64& endCounter)
at Microsoft.Exchange.Search.RetriableOperations.DoRetriableMapiOperation[SourceType,ReturnType,Parameter1Type,Parameter2Type,Parameter3Type](ThreadLocalCrawlData crawlData, SourceType source, Parameter1Type parameter1, Parameter2Type parameter2, Parameter3Type&
parameter3, MapiOperationDelegate`5 operationDelegate)
at Microsoft.Exchange.Search.NotificationWatcher.GetMapiEvents(Int32 maxEvents, NotificationQueue notificationQueue, Int64& endCount)
at Microsoft.Exchange.Search.NotificationWatcher.NotificationWatcherThread()), and Operations Manager would never alert it.
Log Name:
Application
Source:
MSExchangeRepl
Date:
05/06/2014 21:50:52
Event ID:
4082
Task Category: Service
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
The replication network manager encountered an error while monitoring events. Error: Microsoft.Exchange.Cluster.Replay.AmClusterApiException: An Active Manager operation failed. Error
An error occurred while attempting a cluster operation. Error: Cluster API '"OpenCluster(Exchangeserver1) failed with 0x6d9. Error: There are no more endpoints available from the endpoint mapper"' failed.. ---> System.ComponentModel.Win32Exception:
There are no more endpoints available from the endpoint mapper
--- End of inner exception stack trace ---
at Microsoft.Exchange.Cluster.Replay.NetworkManager.DriveMapRefresh()
at Microsoft.Exchange.Cluster.Replay.NetworkManager.TryDriveMapRefresh()
Event Xml:
Log Name:
Application
Source:
ESE
Date:
05/06/2014 21:51:15
Event ID:
489
Task Category: General
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
msexchangerepl (2448) An attempt to open the file "O:\Mailbox Databases\Online Archive 1\Online Archive 1.edb" for read only access failed with system error 32 (0x00000020):
"The process cannot access the file because it is being used by another process. ".
The open file operation will fail with error -1032 (0xfffffbf8).
For more information, click http://www.microsoft.com/contentredirect.asp.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="ESE" />
<EventID Qualifiers="0">489</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-05T20:51:15.000000000Z" />
<EventRecordID>7392312</EventRecordID>
<Channel>Application</Channel>
<Computer>Exchangeserver1</Computer>
<Security />
</System>
<EventData>
<Data>msexchangerepl</Data>
<Data>2448</Data>
<Data>
</Data>
<Data>O:\Mailbox Databases\Online Archive 1\Online Archive 1.edb</Data>
<Data>-1032 (0xfffffbf8)</Data>
<Data>32 (0x00000020)</Data>
<Data>The process cannot access the file because it is being used by another process. </Data>
</EventData>
</Event>
Log Name:
Application
Source:
MSExchangeRepl
Date:
05/06/2014 21:51:15
Event ID:
4107
Task Category: Service
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
The Microsoft Exchange Replication service detected that database 'Online Archive 1' may be mounted on two servers. The copy on server 'EXCHANGESERVER1' will now be dismounted. Please
review the event logs for more information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">4107</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-05T20:51:15.000000000Z" />
<EventRecordID>7392314</EventRecordID>
<Channel>Application</Channel>
<Computer>Exchangeserver1</Computer>
<Security />
</System>
<EventData>
<Data>Online Archive 1</Data>
<Data>EXCHANGESERVER1</Data>
</EventData>
</Event>
Log Name:
Application
Source:
MSExchangeRepl
Date:
05/06/2014 21:51:15
Event ID:
2070
Task Category: Service
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
The Microsoft Exchange Replication service encountered an error while inspecting the logs and database for Online Archive 1\EXCHANGESERVER1 on startup. Error: File check failed : File
'O:\Mailbox Databases\Online Archive 1\Online Archive 1.edb' could not be opened.
The file is locked or in use.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">2070</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-05T20:51:15.000000000Z" />
<EventRecordID>7392315</EventRecordID>
<Channel>Application</Channel>
<Computer>Exchangeserver1</Computer>
<Security />
</System>
<EventData>
<Data>Online Archive 1\EXCHANGESERVER1</Data>
<Data>File check failed : File 'O:\Mailbox Databases\Online Archive 1\Online Archive 1.edb' could not be opened.
The file is locked or in use.</Data>
</EventData>
</Event>
Log Name:
Application
Source:
ESE
Date:
05/06/2014 21:51:45
Event ID:
489
Task Category: General
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
msexchangerepl (2448) An attempt to open the file "O:\Mailbox Databases\Online Archive 1\Online Archive 1.edb" for read only access failed with system error 32 (0x00000020):
"The process cannot access the file because it is being used by another process. ".
The open file operation will fail with error -1032 (0xfffffbf8).
For more information, click http://www.microsoft.com/contentredirect.asp.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="ESE" />
<EventID Qualifiers="0">489</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-05T20:51:45.000000000Z" />
<EventRecordID>7392316</EventRecordID>
<Channel>Application</Channel>
<Computer>Exchangeserver1</Computer>
<Security />
</System>
<EventData>
<Data>msexchangerepl</Data>
<Data>2448</Data>
<Data>
</Data>
<Data>O:\Mailbox Databases\Online Archive 1\Online Archive 1.edb</Data>
<Data>-1032 (0xfffffbf8)</Data>
<Data>32 (0x00000020)</Data>
<Data>The process cannot access the file because it is being used by another process. </Data>
</EventData>
</Event>
Log Name:
Application
Source:
MSExchange Search Indexer
Date:
05/06/2014 21:51:50
Event ID:
108
Task Category: General
Level:
Information
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
Exchange Search Indexer has enabled indexing for the Mailbox Database Online Archive 1 (GUID = ee385d93-918f-470e-b57b-a87d7e23ed20).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange Search Indexer" />
<EventID Qualifiers="16388">108</EventID>
<Level>4</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-05T20:51:50.000000000Z" />
<EventRecordID>7392320</EventRecordID>
<Channel>Application</Channel>
<Computer>Exchangeserver1</Computer>
<Security />
</System>
<EventData>
<Data>Online Archive 1</Data>
<Data>ee385d93-918f-470e-b57b-a87d7e23ed20</Data>
</EventData>
</Event>
Log Name:
Application
Source:
ExchangeStoreDB
Date:
05/06/2014 21:52:00
Event ID:
124
Task Category: Database recovery
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
At '05/06/2014 21:51:15' the Exchange Information Store Database 'Online Archive 1' copy on this server encountered an error. Consult the event log on the server for other "ExchangeStoreDb"
or "msexchangeRepl" events that may identify the specific failure. The Replication Service will automatically attempt to retry.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="ExchangeStoreDB" />
<EventID Qualifiers="49156">124</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-05T20:52:00.000000000Z" />
<EventRecordID>7392327</EventRecordID>
<Channel>Application</Channel>
<Computer>Exchangeserver1</Computer>
<Security />
</System>
<EventData>
<Data>Online Archive 1</Data>
<Data>ee385d93-918f-470e-b57b-a87d7e23ed20</Data>
<Data>Replay</Data>
<Data>AlertOnly</Data>
<Data>Online Archive 1</Data>
<Data>
</Data>
<Data>
</Data>
<Data>05/06/2014 21:51:15</Data>
</EventData>
</Event>
These seem to repeat until a log entry:
Log Name:
Application
Source:
MSExchangeIS
Date:
05/06/2014 22:14:38
Event ID:
9617
Task Category: Exchange VSS Writer
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
Exchangeserver1
Description:
Exchange VSS Writer (instance ae29b16e-11b9-4f2d-b2eb-a544d0927d87:2) failed with error code -2147221233 when processing the backup completion event.
I thought it was a backup issue but Veeam have investigated and have said it is a VSS timeout issue (I'm not convinced)
Recently I have had to have a new logs drive and extend the size of the mail box drive but since those changes were made backup has run OK until this issues.
Any advice appreciated.Hi,
Based on my research, when Veeam takes the snapshot to then do a VSS backup it will cause the databases in the DAG to fail over and cause lots of alerts and we can modify the REM for the backup issue:
http://desktopfeedbag.com/2012/02/23/fixed-exchange-2010-sp1sp2-dag-fail-over-with-veeam/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Thanks,
Angela Shi
TechNet Community Support -
ITunes 10.5 very slow syncing with idevices not a backup issue
I have the latest itunes 10.5.2 installed on my 32 bit Windows 7 pc. Ever since i upgraded my ipod 4 and iphone 4 to ios 5 it syncs very slowly with itunes (1 song aka 5 mb every 2 min and takes like 7 min to start syncing). i have tried restoring my phone and ipod with a new profile, making my ipod or iphone backup to icloud so that kills the long backup issue, reinstallled windows and just have itunes, reinstall itunes and wipeout the appledrivers then reinstall. The devices sync fine when i use a mac that isnt mine. i also have tried outher windows pcs with no luck. im out of ideas and im tired of wating 4 hrs just for a audiobook or a movie to sync.
Yeah seriously, I have my first gen iPhone and never had a issue with it. Blackberry always had a horrible desktop manager for the PC for YEARS and I always had to debug the issues myself for clients. Unfortunately for a lot of my clients the Blackberry is a better device for business, just horrible desktop software.
Eventually I'll push my client to move over to hosted exchange server, But for right now before making that push, I need to resolve this issue with the Blackberry sync. I would hate for all the work and conversion over to the Mac to be wasted over a simple issue that possibly can be resolved by a simple setting I'm over looking.
It's also a possibility the extremely slow syncing can be caused by years of unorganized entering of contacts, but trying to sort out over 2000 contacts would be near impossible for a person with a busy schedule. -
I recently purchased the K210 after researching prices and specs and think I have what should be a pretty sweet machine. However, after about 8-10 days of operation I was getting frequent create new base backup message until it reached the point that about 5 minutes after creation I would receive the message again. I am on 56K internet connection and it required almost a week to completely download all the files that Windows Update considered important. Upon checking the system I discovered that the service partition was almost completely full, 27 out of 30G. Being brand new at all of this I did something wrong but was able to restore factory settings. I am now afraid to download windows updates for fear of the same problem. I currently ignore the request to create base backup. What I need to know is if I was doing something wrong...Should the service partition become that full so quickly? I have never owned a machine with the service partition so I need to know how to access or store files on D directory. The only supplemental program I have added is a Lexmark printer which was recognized and operates correctly. Hope I asked the right questions. Excuse my newness!!!
When all is said and done, there is nothing left to say or do...Hi Fishoutofwater
You could see if tech support can help as this issue can have so many solutions depending on your PC build and your version of onekey, the way your OS is configured. etc.
It may also be helpful to search these forums for all info about base backup issues.
There is a 3000 system discussion thread, about onekey recovery and the lenovo recovery system.
Acronis True Image or Norton Ghost is a way to do an image backup, you most likely want to get your base backup and recovery system working as Lenovo has set it up. (onekey).
Again, It may be helpful to search the forums threads or google for for "lenovo one key recovery" "Lenovo recovery" "lenovo base backup" , and then talk to to tech support.
Good Luck.
Gadget.
Message Edited by GADGET on 09-07-2008 11:42 PM -
RMAN Backup Issue when Full backup file was missing
Hi,
On : 11.2.0.2 version, Recovery Manager
RMAN Backup issue
Last week we had the NFS Issue where we backup the files onto NFS.
The problem occurred in the below sequence
Saturday the backup was successful
Saturday before deleting the backup files they are copied to tape
Deleting the backup files via OS command
Sunday Full backup started but due the NFS issue backup failed(Killed the instance and restarted)
Did the RMAN Incremental backup which worked on Monday
On Tuesday RMAN started complaining and started doing the Full backup.
no parent backup or copy of datafile 1 found
no parent backup or copy of datafile 3 found
no parent backup or copy of datafile 24 foundSony any idea why the Incremental backup worked on Monday but not on Tuesday
Regards
NMOk here is why I would like exact filenames..
1) to speed the time of recovery. I am much more familiar with traditional recovery methods than RMAN, and while I myself installed and suggested RMAN for backups, our other (11i) database does not use RMAN and so I am more familiar with traditional recovery. So to be able to recover quickly I want to have these files as close as possible to the original names so that I can use my standard script (from a trace file) to recreate the control fiile. If I can get RMAN to spit out the filies with original names but keep RMAN for making the backup, I may ditch the rman bacjup script in chron and write a traditional hot backup script which copies the files the old fashioned way.
2) to reduce cloning time. The RMAN duplicate command is not as good as I thought. I was actually easier for me to restore RMAN backups first to a box that has all the same paths, and THEN shutdown (cold) these files and copy them cold to another server, and restore from there. Agaiin if I can get the original file names, I could choose to do recovery either way (RMAN or traditional) in a real emergency instead of being forced to use rman.
3) to be able to switch to a backup file in the FRA without having to rename it. Seems logical if it is already named correctly.
thanks ! Marvi -
Hi,
On Friday we have switched databases to V12 version as it was announced that they are now generally available, but I have doubts that everything was tested by Microsoft, as immediately we have several issues:
1. We had automated backups scheduled on all DB. On Sunday everything started to not work properly. There were more than 10 backup databases created like AutomatedSqlExport_X_20150201T050000Z and emails send that backup cannot be created. We had to
remove them manually except one.
2. One of the backup database is still in creating state from yesterday so we cannot remove it.
3. We have turned off all automated backups in Azure Portal, but I'm not sure if they can be turned on again. I do not want to have 20 DB billed every week as autometed scripts are not working properly.
4. After switch in Management Portal only last hour metrics are available. Switching to 24h or more returns all zeroes. When do we count on the fix?
PS. tracking ID of db that is in creating state: 44530DC6-B174-4FAA-A4D6-2C01CA20CB85
Regards,
RafalHi Gluwer,
Thanks for posting here.
I suggest you to open a support case as this needs more back-end information which cannot be discussed over the forum.
Refer: http://azure.microsoft.com/en-us/support/options/
Girish Prajwal -
ICloud Backup Issues on iPhone & iPad Air: NOT Enough Storage (5 GB)
I've been a user of the free 5 GB of storage since its inception without any problems. I was backing up data on my iPhone and 3rd gen. iPad on a regular basis and never ran into any issues.
I recently upgraded to an iPad Air and set it up using a restoration and it went off without a hitch. The very next day I started noticing these warnings that I was approaching my storage limit even though I had not really changed the amount of data on my phone or the Air. I don't download lots of apps and basically only update them when necessary. I use iTunes Match, so I stream my music from the cloud so I don't have audio files on any devices, with the exception of my iPhone for those times I don't have access to wi-fi -- and it's always been the same number of files/same size.
(The iPhone is showing 3.5 GB in use and the Air is showing 1.3 as of this post).
I do have a fair amount of photos in the iPhoto stream as I'm always snapping something, but not to the point of being obssessed. And I always am moving them into iPhoto/Aperture and deleting them frequently, so I'm not talking about thousands of photos being on either device at any time.
In other words, I'm like the average user when it comes to the amount of data on my devices -- and am not going overboard where it's at the point that I know I have to delete things to make room.
I've scrutinized the file sizes of everything I possibly can in the settings on both devices yet I'm still getting the warning that I don't have enough storage space. I find it hard to believe that something during the process of setting up the Air pushed my storage over the edge to where I actually need to purchase space because I just am not seeing any deviation from what I used to do before setting up the Air.
I deleted the 3rd gen. iPad backup as well as any other old backups from iCloud which are no longer relevant each and every single time I've upgraded any device. I don't have anyone else using these devices other than myself so no one is downloading apps, snapping pix, or doing anything which would add data. I did a quick glance at the forums to see that lots of people have this problem - so I'm wondering if it's some type of glitch?
My iPhone told me today that I had not backed up to iCloud in weeks - which I'm sure refers to the time right around I bought the Air - as I have my devices to auto backup when connected to wi-fi. The last backup according to settings was 5/6 -- while the Air was on 5/16.
This is very annoying as I don't want to have to buy the next level of storage just to rid myself of this message so I'd be interested to know what others have tried. Sure, I can just do a complete backup of all my devices to my computer -- which I do fairly regularly -- but it was always good to know that I had access to iCloud backups for those times I didn't hook things up to my MBP.
Does anyone have any suggestions as to things I can try to rid myself of this dreaded message? It pops up daily and I really would love to fix it. Thanks!I think I figured it out. I went through my iPhone and turned off a lot of the apps that were slotted to backup and it appears to done the trick as the phone is backing up to iCloud.
The language needs to be broken down where it makes more sense of what's happening behind the scenes during these backups as I think it can be easily miscontrued that it's the data the various specific apps are using which is the issue at hand and not them apps themselves is what's causing the increase in size; some people may think that if they turn these apps off, they are deleting the apps from their devices so they leave them all switched on which ends up bumping up the size and ultimately eating up storage space.
I admit to not really paying attention to what the explanation was saying when I initially got the error message which made me initially post this. Now that I'm rationally thinking, I can see the problem of the disappearing space and am off to turn off a handful of apps on the Air to reduce the storage allotment even more -
We have a situation where single project backup is reported as "completed successfully" , but when we try to restore it, it gives error.
The Oracle Tech Support is horrible beyond imagination. For two weeks they kept telling me that they are working on it, and now they want to start over and want another backup sample. This tells me clearly, they have no clue, just fishing around to find something. Here is the entire conversation:
Quote:
I am surprised that this simple realization came after two weeks.This is really worst tech support I have ever seen, inspite of paying top dollars. Is there any place in Oracle which tracks the quality of technical support provided to clients or is it free for all.
Well, just for your information, we have also started looking at some other options to replace Contract manager due to the bad support.
I will send you the backup as desired.
Oracle Support - April 16, 2012 2:15:23 PM GMT-04:00 [ODM Action Plan]
Data Request
Thanks for your reply.
Based on the information you have provided and the support team's previous
experience with the issue I believe the project itself may be corrupt in some way.
Therefore when one attempts to restore the project the restore process fails the
validity check due to possible missing data within the project.
Because the .JAR file itself is corrupt I'm unable to view its contents using an XML editor
or other means.
Please upload a copy of a database export of the Oracle database where this project
exists. This way I can restore the data here and query the contents of the project
itself to confirm whether there is missing or invalid data within the project.
See DOC ID 908371.1 (attached in the related articles section of this SR) for steps
of how to perform the export.
Thank you.
[email protected] - April 16, 2012 9:31:18 AM GMT-04:00 [Update from Customer]
This is really frustrating to receive such responses for a paid service contract after more than two weeks of pending SR. Did you read my entire post before posting your question or you just want me to start all over again. Last time you said that you have reproduced the issue, then why do you need another backup?
Anyway the replies are as under:
1. This is happening with one project and not multiple projects ( read my earlier responses)
2. No, there were no errors reported ( read my earlier responses)
3. It was saved on local drive
4.As I understand you were able to reproduce the issue, then why do you need me to send you another backup. If so, please define the backup should be under what environment variables, because I dont want you to come back 2 weeks later and ask for another backup with different variables.
Oracle Support - April 13, 2012 3:21:27 PM GMT-04:00 [ODM Action Plan]
Hello.
1- So am I understanding that this is only happening with ONE project and not multiple projects?
2- When this single project backup was originally taken did any errors or unusual behavior occur?
3- Where is the backup file being saved when it is taken? On the local machine or to a network drive on some other machine?
4- Please create another single project backup of this project and attempt to restore that new backup to the new database
group. Let me know how this works out.
[email protected] - April 11, 2012 7:23:42 PM GMT-04:00 [Update from Customer]
We are unable to do a backup only for this project. All other projects are working OK. Let me know if you need anything else.
Thanks
Oracle Support - April 11, 2012 5:56:53 PM GMT-04:00 [ODM Action Plan]
Hello. I have reproduced the issue and am currently still investigating the issue. I will reply
back shortly with next steps and or further questions. Thank you for bearing with us.
[email protected] - April 11, 2012 2:07:53 PM GMT-04:00 [Update from Customer]
When can we expect a reply?
[email protected] - April 9, 2012 1:23:40 PM GMT-04:00 [Update from Customer]
Do we have a time line for a fix of this issue?
Oracle Support - April 2, 2012 11:47:40 PM GMT-04:00 [Notes]
Thank you for uploading the single project backup. I will try to restore
to a test system here to try and reproduce the issue.
[email protected] - April 2, 2012 9:41:47 AM GMT-04:00 [Update from Customer]
Upload to gtcr successful for the file EXP_SFP1_SFP1.JAR.
[email protected] - April 2, 2012 9:40:16 AM GMT-04:00 [Update from Customer]
Attached is a single project backup which was backed up successfully, but gives error while restoring. i havetried to restore it on two seperate installation of CM13, and both gave a message "error were encountered......."
[email protected] - April 2, 2012 7:35:33 AM GMT-04:00 [Update from Customer]
1. This happens with Single project backup with all the projects we have.
2.yes, it is being restored to another group in the Same installation of Contract Manager.
As expalined earlier, this was happening without any error until we installed the Contract Management Exchange Module. Since then we have uninstalled the module, but the error continues.
Oracle Support - April 2, 2012 12:37:10 AM GMT-04:00 [Notes]
Hello. Thanks for your reply.
1- Does this issue happen with one single project backup or multiple backup files?
2- Is the single project backup being restored to the same version of Contract Management system as where the backup was
taken?
3- If only happening with one backup please upload the single project backup file to this SR. This way I can restore the file to a test environment for research.
[email protected] - March 30, 2012 9:31:50 PM GMT-04:00 [Update from Customer]
1. The version is 13.0.5.0, build 2085
2. "Errors encountered during restore"
3. No
4.Weblogic
Let me know if you need anything else.
Thanks
Oracle Support - March 30, 2012 5:30:53 PM GMT-04:00 [ODM Action Plan]
Data Request
Hello. Thank you for contacting Oracle Primavera support.
A few questions:
1- What is the version and build of Contract Management? (This can be found in the upper right corner of the log on screen)
2- What is the error message or behavior that occurs when attempting to restore the backup?
3- Does the project already exist in the group to which the backup is being restored?
4- What application server is being used with Contract Management? JBOSS or Weblogic?
- If you are unsure which app server is being used do the following
a. On the web server machine right click my computer and choose manage > expand services and apps > click on services
b. Scroll through services and look for the service named either Contract Manager or Primavera Contract Management. If this service exists
then open My Computer > open the drive that has your installed programs and look for a folder named JBOSS 5.0.1 GA
c. If both of the above exist then your running JBOSS if neither of the above exist then go to step d.
d. Open My computer and look for either of the below folders:
[drive letter]:\bea\user_projects\domains\[Contract Management domain name]
[drive letter]:\Oracle\Middleware\user_projects\domains\[Contract Management domain name]
e. If either of the above folders exist then it is likely that Weblogic is being used as the application server.
Thank you.
[email protected] - March 30, 2012 3:24:01 PM GMT-04:00 [Customer Problem Description]
1) Does your issue impact all of your users, or just some?
All users
2) Does your issue occur in a single project, or in multiple projects?
all projects
3) ### Impact on Business ###
We back up the project before processing monthly pay requisitions, so that it can be restored in case the process is to be reversed. Till last month it was working properly. This problem started after we installed Contract Management Exchange Program to export the Pay Requisitions. Since then we have uninstalled this program, but the error continues.
[email protected] - March 30, 2012 3:24:01 PM GMT-04:00 [Customer Problem Description]
Problem Description: Unable to restore Project backup created in from one group to another group.
Unquote:
Anyone have any idea about this error message?
ThanksI've experienced this also and I would then try the same project the next day and it worked OK. Sometimes the backup file does not get completely written for whatever reason. Try again sometime when there is no one else logged in. ALSO, and more importantly, make sure that you are selecting a LOCAL path when backing up. As in your local C or D drive. Don't assume that your "My Documents" folder is local either because in many organizations that is on a network drive somewhere.
-
Read Only Tablespace Backup Issue
Hii!!
I had been trying to to take Read Only Table space Backup. So, firstly changed the tablespace using
SQL> alter tablespace users read only;
Tablespace altered.
2. Then took backup of all the data files using OS Copy command.
Now , the issue i am facing is that can i change the table space to read_write mode???? If yes , then how?? , plz help...I had been trying to to take Read Only Table space Backup. So, firstly changed the tablespace using
SQL> alter tablespace users read only;
Tablespace altered.
2. Then took backup of all the data files using OS Copy command.
Now , the issue i am facing is that can i change the table space to read_write mode???? If yes , then how?? , plz help...Yes you can do,
SQL> alter tablespace users read write;After successful restore,
sys@11GDEMO> select tablespace_name,status from dba_tablespaces where tablespace_name='CKPT';
TABLESPACE_NAME STATUS
CKPT ONLINE
sys@11GDEMO> alter tablespace ckpt read only;
Tablespace altered.
sys@11GDEMO> select tablespace_name,status from dba_tablespaces where tablespace_name='CKPT';
TABLESPACE_NAME STATUS
CKPT READ ONLY+
sys@11GDEMO> alter tablespace ckpt read write;+
Tablespace altered.
sys@11GDEMO> select tablespace_name,status from dba_tablespaces where tablespace_name='CKPT';
TABLESPACE_NAME STATUS
CKPT ONLINE+
sys@11GDEMO>
Edited by: CKPT on Jul 6, 2011 11:22 AM -
Backup Issue of exchange server 2007 mailbox store
Dears
Exchange server 2007 with CCR clustering
I have got a problem with the backup of one of my mailbox store. Its going till the last and giveing the final error as follows:-
V-79-57344-65247 - A failure occurred reading an object.
Also the warning as follows:-
Backup- \\mailserver.domain\Microsoft Information Store\First Storage Group
WARNING: "\\mailserver.domain\Microsoft Information Store\First Storage Group\Database" is a corrupt file. This file cannot verify.
Backup V-79-57344-34108 - An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly resynchronized with the original volumes.
Does it mean my information store is really a corrupted file. It has been properly monted and logs are genearting.
Even when I checked the last full backedup log file from the management shell it clearly shows the backing up is properly happened on the log files.
When I checked the event log of Exchnage server I can see these logs:-
Event ID 401, 403 errors
The size of the problem store is 308 GB.
One of the other store with 46 GB is backing up without any issueHi,
If you have a space issue with the Exchange server, you can upgrade drives on active node and passive node one by one. It is not recommended to upgrade them at the same time.
For more information about upgrading Exchange 2007 CCR active node or passive node, here are some helpful threads for your reference.
Upgrade hard drives on passive node. Process and procedure
http://social.technet.microsoft.com/Forums/exchange/en-US/08b9e893-87c9-48c3-bab2-91027cc09949/upgrade-hard-drives-on-passive-node-process-and-procedure?forum=exchangesvravailabilityandisasterrecoverylegacy
Upgrading hard drives in exchange server
http://social.technet.microsoft.com/Forums/exchange/en-US/0e4514f9-76da-44d2-9dec-a3be5add79b1/upgrading-hard-drives-in-exchange-server?forum=exchangesvravailabilityandisasterrecoverylegacy
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support -
Database online backup issue after ERP 6.0 EHP4 update
Dear Folks!...
I have an issue with ERP 6.0 system with database oracle.
After performing EHP4 update unable to trigger online backup.
Shows bellow error message:
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.10
BR0301E SQL error -1031 at location BrSapTspList-8, SQL statement:
'PREPARE stmt_1 STATEMENT FROM'
'SELECT TABSPACE FROM "SAPSR3".TSORA UNION SELECT INDSPACE FROM "SAPSR3".TSORA ORDER BY 1'
ORA-01031: insufficient privileges
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.10
BR0307I Shutting down database instance RES ...
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.17
BR0308I Shutdown of database instance RES successful
BR0056I End of database backup: beazhkrz.afd 2009-07-10 14.53.10
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.17
BR0054I BRBACKUP terminated with errors
At SAP level check with table TSORA shows current existing tablespaces.And from DB13 able to perform DB actions except backup related.
Could any one suggest to help me to fix the issue.
Thanks in Advance.
Regards,
Venkata.Dear presu
It has been installed on Windows OS 64 bit AMD processor.And related to permissions of the folder was given completely.
Complete log Message:
BR0051I BRBACKUP 7.00 (39) BR0055I Start of database backup: beazhkrz.afd 2009-07-10 14.52.43
BR0484I BRBACKUP log file: G:\oracle\RES\sapbackup\beazhkrz.afd
BR0477I Oracle pfile G:\oracle\RES\102\database\initRES.ora created from spfile G:\oracle\RES\102\database\spfileRES.ora
BR0613I Database instance RES is shut down BR0329I Database instance RES will be opened now BR0280I BRBACKUP time stamp: 2009-07-10 14.52.45 BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRBACKUP: BR0280I BRBACKUP time stamp: 2009-07-10 14.52.49 BR0257I Your reply: 'c' BR0259I Program execution will be continued...
BR0280I BRBACKUP time stamp: 2009-07-10 14.52.49 BR0304I Starting and opening database instance RES ...
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.01 BR0305I Start and open of database instance RES successful
BR0101I Parameters
Name Value
oracle_sid RES
oracle_home G:\oracle\RES\102
oracle_profile G:\oracle\RES\102\database\initRES.ora
sapdata_home G:\oracle\RES
sap_profile G:\oracle\RES\102\database\initRES.sap
backup_mode ALL
backup_type offline
backup_dev_type disk
backup_root_dir Y:\Backup
compress no
disk_copy_cmd copy
cpio_disk_flags -pdcu
exec_parallel 0
system_info resadm RCIHWRES13V Windows 5.2 Build 3790 Service Pack 2 AMD64
oracle_info RES 10.2.0.4.0 8192 8188 87296881 RCIHWRES13V UTF8 UTF8
sap_info 701 SAPSR3 RES TEMPLICENSE R3_ORA INITIAL
make_info NTAMD64 OCI_10201_SHARE Dec 7 2008
command_line G:\usr\sap\RES\DVEBMGS13\exe\brbackup.exe -p initRES.sap -d disk -t offline -m all -k no -e 0 -l E -U
BR0116I ARCHIVE LOG LIST before backup for database instance RES
Parameter Value
Database log mode No Archive Mode
Automatic archival Disabled
Archive destination M:\oracle\RES\oraarch\RESarch
Archive format ARC%S_%R.%T
Oldest online log sequence 8185
Next log sequence to archive 8188
Current log sequence 8188 SCN: 87296881
Database block size 8192 Thread: 1
Current system change number 87304439 ResetId: 689356796
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPSR3 ONLINE* ONLINE+ H:\ORACLE\RES\SAPDATA1\SR3_1\SR3.DATA1 2222989312 4 7 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_21\SR3.DATA21 2097160192 48 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_22\SR3.DATA22 2097160192 49 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_23\SR3.DATA23 2097160192 50 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_24\SR3.DATA24 2097160192 58 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_25\SR3.DATA25 2097160192 59 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_26\SR3.DATA26 2097160192 60 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_27\SR3.DATA27 2097160192 61 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_28\SR3.DATA28 2097160192 62 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_29\SR3.DATA29 2097160192 63 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE+ H:\ORACLE\RES\SAPDATA1\SR3_2\SR3.DATA2 2243960832 5 7 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_30\SR3.DATA30 2097160192 64 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE+ I:\ORACLE\RES\SAPDATA2\SR3_8\SR3.DATA8 2139103232 11 8 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ I:\ORACLE\RES\SAPDATA2\SR3_9\SR3.DATA9 2432704512 12 8 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ J:\ORACLE\RES\SAPDATA3\SR3_11\SR3.DATA11 2264932352 14 9 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ K:\ORACLE\RES\SAPDATA4\SR3_18\SR3.DATA18 2181046272 21 10 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ K:\ORACLE\RES\SAPDATA4\SR3_19\SR3.DATA19 2181046272 22 10 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ K:\ORACLE\RES\SAPDATA4\SR3_20\SR3.DATA20 2202017792 23 10 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE+ ONLINE+ H:\ORACLE\RES\SAPDATA1\SR3700_1\SR3700.DATA1 2705334272 24 7 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE+ ONLINE+ H:\ORACLE\RES\SAPDATA1\SR3700_2\SR3700.DATA2 2705334272 25 7 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE+ ONLINE+ H:\ORACLE\RES\SAPDATA1\SR3700_3\SR3700.DATA3 2747277312 26 7 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE+ ONLINE I:\ORACLE\RES\SAPDATA2\SR3700_20\SR3700.DATA20 2147491840 54 8 NOLINK FILE 0 0 8192
PSAPSR3700 ONLINE+ ONLINE J:\ORACLE\RES\SAPDATA3\SR3700_21\SR3700.DATA21 2147491840 55 9 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3701_11\SR3701.DATA11 2097160192 72 7 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3701_12\SR3701.DATA12 2097160192 73 7 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE I:\ORACLE\RES\SAPDATA2\SR3701_10\SR3701.DATA10 2097160192 71 8 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE I:\ORACLE\RES\SAPDATA2\SR3701_5\SR3701.DATA5 2097160192 66 8 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE I:\ORACLE\RES\SAPDATA2\SR3701_6\SR3701.DATA6 2097160192 67 8 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE I:\ORACLE\RES\SAPDATA2\SR3701_7\SR3701.DATA7 2097160192 68 8 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE I:\ORACLE\RES\SAPDATA2\SR3701_8\SR3701.DATA8 2097160192 69 8 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE I:\ORACLE\RES\SAPDATA2\SR3701_9\SR3701.DATA9 2097160192 70 8 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE K:\ORACLE\RES\SAPDATA4\SR3701_1\SR3701.DATA1 20971528192 44 10 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE L:\ORACLE\RES\SAPDATA5\SR3701_2\SR3701.DATA2 20971528192 45 11 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE L:\ORACLE\RES\SAPDATA5\SR3701_3\SR3701.DATA3 20971528192 46 11 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE L:\ORACLE\RES\SAPDATA5\SR3701_4\SR3701.DATA4 10485768192 47 11 NOLINK FILE 0 0 8192
PSAPSR3DB ONLINE* ONLINE+ K:\ORACLE\RES\SAPDATA4\SR3DB_1\SR3DB.DATA1 2097160192 41 10 NOLINK FILE 10485760000 20971520 8192
PSAPSR3DB ONLINE* ONLINE+ K:\ORACLE\RES\SAPDATA4\SR3DB_2\SR3DB.DATA2 2097160192 42 10 NOLINK FILE 10485760000 20971520 8192
PSAPSR3DB ONLINE* ONLINE+ K:\ORACLE\RES\SAPDATA4\SR3DB_3\SR3DB.DATA3 1048584192 43 10 NOLINK FILE 10485760000 20971520 8192
PSAPSR3USR ONLINE* ONLINE+ H:\ORACLE\RES\SAPDATA1\SR3USR_1\SR3USR.DATA1 20979712 40 7 NOLINK FILE 10485760000 20971520 8192
PSAPTEMP ONLINE# ONLINE+ I:\ORACLE\RES\SAPDATA2\TEMP_1\TEMP.DATA1 2097160192 -1 8 NOLINK FILE 10485760000 20971520 8192
PSAPUNDO ONLINE- ONLINE+ J:\ORACLE\RES\SAPDATA3\UNDO_1\UNDO.DATA1 8766103552 2 9 NOLINK FILE 10485760000 20971520 8192
SYSAUX ONLINE* ONLINE+ H:\ORACLE\RES\SAPDATA1\SYSAUX_1\SYSAUX.DATA1 251666432 3 7 NOLINK FILE 10485760000 20971520 8192
SYSTEM ONLINE* SYSTEM+ H:\ORACLE\RES\SAPDATA1\SYSTEM_1\SYSTEM.DATA1 1073750016 1 7 NOLINK FILE 10485760000 20971520 8192
BR0119I Redo log files
File Size Group Device Status Link Type
F:\ORACLE\RES\MIRRLOGA\LOG_G11M2.DBF 52429312 1 5 INUSE NOLINK FILE
E:\ORACLE\RES\ORIGLOGA\LOG_G11M1.DBF 52429312 1 4 INUSE NOLINK FILE
F:\ORACLE\RES\MIRRLOGB\LOG_G12M2.DBF 52429312 2 5 INUSE NOLINK FILE
E:\ORACLE\RES\ORIGLOGB\LOG_G12M1.DBF 52429312 2 4 INUSE NOLINK FILE
F:\ORACLE\RES\MIRRLOGA\LOG_G13M2.DBF 52429312 3 5 INUSE NOLINK FILE
E:\ORACLE\RES\ORIGLOGA\LOG_G13M1.DBF 52429312 3 4 INUSE NOLINK FILE
F:\ORACLE\RES\MIRRLOGB\LOG_G14M2.DBF 52429312 4 5 INUSE NOLINK FILE
E:\ORACLE\RES\ORIGLOGB\LOG_G14M1.DBF 52429312 4 4 INUSE NOLINK FILE
BR0120I Control files
File Size Id. Device Link Type
E:\oracle\RES\origlogA\cntrl\cntrlRES.dbf 14106624 0 4 NOLINK FILE
E:\oracle\RES\origlogB\cntrl\cntrlRES.dbf 14106624 0 4 NOLINK FILE
G:\oracle\RES\sapdata1\cntrl\cntrlRES.dbf 14106624 0 6 NOLINK FILE
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.10
BR0301E SQL error -1031 at location BrSapTspList-8, SQL statement:
'PREPARE stmt_1 STATEMENT FROM' 'SELECT TABSPACE FROM "SAPSR3".TSORA UNION SELECT INDSPACE FROM "SAPSR3".TSORA ORDER BY 1'
ORA-01031: insufficient privileges
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.10 BR0307I Shutting down database instance RES ...
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.17 BR0308I Shutdown of database instance RES successful
BR0056I End of database backup: beazhkrz.afd 2009-07-10 14.53.10 BR0280I BRBACKUP time stamp: 2009-07-10 14.53.17
BR0054I BRBACKUP terminated with errors
Regards,
Venkata. -
Oracle 11.2.0.4 backup issues
Hi All,
Rdbms:oracle 11.2.0.4
os suse Linux 10
Symantec net backup 7.1
actually one our test server upgrading from oracle 10g to oracle 11.2.0.4.
we have configured rman netbackup for our test server with oracle 10g rdbms version.
here my question is do i need to re-configure net backup again or just moving of libobk.sofile from oracle 10g home to oracle 11g Home?
please suggest steps .
thanks,
Mike.Hi
Please see the following Knowledge Article this is our official clarification in support to the supported matrix document
Note 1555914.1 - Clarification of Supported Point Releases for Oracle ATG Web Commerce Supported Environments Software
https://support.oracle.com/rs?type=doc&id=1555914.1
You will see in there the following guidance concerning Oracle DB
Oracle
Minor point versions (after second point) above the stated version are supported.
**Note: Oracle strongly encourages Enterprise Edition for customers with high availability requirements in order to access troubleshooting features which may help minimize delays in issue resolution.
11.2.0.2.0 stated. 11
So in your example 11.2.0.4 would be officially supported by us.
++++
Thanks
Gareth
Please mark any update as "Correct Answer" or "Helpful Answer" if that update helps/answers your question, so that others can identify the Correct/helpful update between many updates. -
VCB/VADP, ESX 4.1 and NetWare vm snapshot backup issue
Hi!
If you are running Netware as a guest in VMware ESX 4.1 and are using backup
software that uses the snapshot feature to backup the guests vmdk then you
may run into an issue that causes the snapshot to fail. This was just
documented by VMware on Feb 23 (two days ago) so you may have not seen this
yet. Here is the url to the VMware kb:
http://kb.vmware.com/kb/1029749
The fix is to install the older v4.0 vmware tools into the NetWare guest.
Cheers,
RonRon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Oracle 11.2.0.1
Windows 7 Home Premium
RMAN> backup database;
Starting backup at 05-MAR-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 03/05/2012 12:25:05
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
continuing other job steps, job failed will not be re-run
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
including current control file in backup set
including current SPFILE in backup set
channel ORA_DISK_1: starting piece 1 at 05-MAR-12
channel ORA_DISK_1: finished piece 1 at 05-MAR-12
piece handle=E:\APP\NISHA\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2012_03_05\O1_MF_NCSNF_TAG20120305T122505_7O8RTBXJ_.BKP tag=TAG20120305T122505 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 03/05/2012 12:25:05
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
RMAN> 1.What is the problem in above scnerio ?
2.How to take RMAN backup when db is down ?
3.How to take RMAN backup when db is noarchivelog mode ?
Please help me. Thank you.I am trying to do a full RMAN cold backup and am getting the following :
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
What’s the cause ?
Here’s the example
connected to target database (not started)
Oracle instance started
database mounted Total System Global Area 1610612736 bytes Fixed Size 2056504 bytes
Variable Size 603983560 bytes
Database Buffers 989855744 bytes
Redo Buffers 14716928 bytes using target database control file instead of recovery catalog
allocated channel: backup_disk1
channel backup_disk1: sid=4977 instance=TEST1 devtype=DISK Starting backup at 31-OCT-13
channel backup_disk1: starting full datafile backupset
channel backup_disk1: specifying datafile(s) in backupset
RMAN-03009: failure of backup command on backup_disk1 channel at 31/10/2013 20:18:45
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
continuing other job steps, job failed will not be re-run
channel backup_disk1: starting full datafile backupset
channel backup_disk1: specifying datafile(s) in backupset
RMAN-03009: failure of backup command on backup_disk1 channel at 13/10/2013 20:18:45
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
continuing other job steps, job failed will not be re-run
channel backup_disk1: starting full datafile backupset
channel backup_disk1: specifying datafile(s) in backupset
RMAN-03009: failure of backup command on backup_disk1 channel at 13/10/2013 20:18:46
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
continuing other job steps, job failed will not be re-run
channel backup_disk1: starting full datafile backupset
channel backup_disk1: specifying datafile(s) in backupset
released channel: backup_disk1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on backup_disk1 channel at 13/10/2013 20:18:47
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
RMAN>
The cause is simple, the database has not been shutdown cleanly. You will require to restart the database and shutdown again, if in a RAC you will have to shutdown all instances cleanly.
Disabing archive log and attempting to backup the database will demonstrate the cause.
SQL> startup force;
ORACLE instance started.
Total System Global Area 1235959808 bytes
Fixed Size 2175288 bytes
Variable Size 620760776 bytes
Database Buffers 603979776 bytes
Redo Buffers 9043968 bytes
Database mounted.
Database opened.
SQL> shutdown abort;
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 1235959808 bytes
Fixed Size 2175288 bytes
Variable Size 620760776 bytes
Database Buffers 603979776 bytes
Redo Buffers 9043968 bytes
Database mounted.
SQL>
Now we’ll try again to backup datafile 1.
RMAN> backup datafile 1;
Starting backup at 31-OCT-13
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=133 device type=DISK
channel ORA_DISK_1: starting compressed full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 13/10/2013 20:43:34
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
This is simply because we issue a shutdown abort on the instance. However, just preforming a recovery will allow you to backup as required.
SQL> recover database;
Media recovery complete.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 – 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
C:UsersGary>rman target sys/passwd@db11g
Recovery Manager: Release 11.2.0.1.0 – Production on Thu Oct 31 20:44:15 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DB10G (DBID=3002158372, not open)
RMAN> backup datafile 1;
Starting backup at 06-DEC-10using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1channel ORA_DISK_1: SID=125 device type=DISK
channel ORA_DISK_1: starting compressed full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00001 name=C:APPGARYORACLEPRODUCT10.2.0DB_1ORADATADB10GSYSTEM01.DBF
channel ORA_DISK_1: starting piece 1 at 31-OCT-13
channel ORA_DISK_1: finished piece 1 at 31-OCT-13
piece handle=C:APPGARYORACLEPRODUCT10.2.0DB_1FLASH_RECOVERY_AREADB10GBACKUPSET2010_12_06O1_MF_NNNDF_TAG20101206T204423_6HTCR810_.BKP tag=TAG20101206T204423 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:45
Finished backup at 31-OCT-13
Starting Control File and SPFILE Autobackup at 31-OCT-13
piece handle=C:APPGARYORACLEPRODUCT10.2.0DB_1FLASH_RECOVERY_AREADB10GAUTOBACKUP2010_12_06O1_MF_S_737066556_6HTCSQVF_.BKP comment=NONE
Finished Control File and SPFILE Autobackup at 31-OCT-13
RMAN> exit
Interestingly, even with the recovery performed, we cannot switch back to archivelog mode without a clean shutdown.
SQL> alter database archivelog;
alter database archivelog*
ERROR at line 1:ORA-00265: instance recovery required, cannot set ARCHIVELOG mode
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-00264: no recovery required
SQL> alter database archivelog;
alter database archivelog*
ERROR at line 1:ORA-00265: instance recovery required, cannot set ARCHIVELOG mode
So we’ll startup and shutdown again. You cannot use the force option since that still does not perform a normal shutdown and you’ll get the same error.
SQL> alter database open;
Database altered.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 1235959808 bytes
Fixed Size 2175288 bytes
Variable Size 620760776 bytes
Database Buffers 603979776 bytes
Redo Buffers 9043968 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database open;
Database altered. -
So, I started a files disk backup yesterday on my m9517c desktop pc. Disk # 25 was in the drive when I fell asleep, late last night. This morning, my monitor has an HP Icon bouncing around, instead of the usual windows vista icon. My mouse will not wake up the screen and touching a key on the keyboard didn't work either. I DO NOT want to start this process over (had to start over yesterday after disk #5 because the pc shut down, and also a couple of previous attempts have not been completed, wasting many CD-R disks) due to the time and disks involved. Shouldn't I be able to wake using the keyboard and then resume where I left off. I was so close to reaching task completion, according to the green progress bar, early this A.M.
Hi @shay3 ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP
Maybe you are looking for
-
Dear Brothers, I need some suggestion from you. Against a material GRN done with posting date 23.01.2008 to Quality Inspection. From Quality - entire quantity transferred to un restricted today i.e 02.02.2008. User issuing material today with date 23
-
IBook G4...Video Card good enough?
On the 14" iBook, is the ATI Mobility Radeon 9550 with 32MB of dedicated DDR SDRAM good enough to be handle Photoshop CS2, and other high-end graphics software? I'm looking at getting an iBook for Graphics creation and other Media, but I'm not sure i
-
Exit in ME21N for change field
Hi everyone, i'm looking for an exit or BADI in ME21N that allows me to change a specific value in table eket. The idea is that after the SAVE, the field EINDT of EKET must be changed. I had aldready tried to use some exits, but not even one worked.
-
Supplier Self-Registration in SRM
In SRM 5.0, I am NOT able to see the 'Supplier Directory' from Prescreen. Full points assured. Thx. Raja
-
How to unsave my password in gmail on safari on iphone
Made a new gmail account and saved it to auto fill by accident. Now can't figure out how to get it to not auto fill when getting on gmail from iphone