Backup Location Not saved
Hi,
Running Desktop 7.1.0.32.
Desktop doesn't save change in backup location.
I have tried the following:
1) Changed the backup location under device options
2) Changed the backup location under desktop options
3) Changed the backup location via the registry.
Everytime I restart the desktop it returns to the default location.
Any suggestions?
TIA,
Greg
Hi there!
I can replicate this...that is a problem indeed! As a work around, I discovered that if you make the target folder change "on the fly" as you actually execute a backup, then the change is retained for future use. But, as you say, via any other means (though I decided not to edit my registry!!), the change is not saved between Desktop Software sessions.
I also discovered that, after you make the change in via 1 or 2 in your methods, then actually take a backup before shutting Desktop Software down, then the configuration change is likewise retained.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
ITunes could not restore the iPhone because the backup could not be saved on this computer
Dears,
Today I planned to update my iPhone 4 to iOS7.
After update while my iPhone was connected to the computer, it didn't work and iTunes asked me to restore my iPhone before I can use it.
Well, I had to click Ok and iPhone was restore to factory settings and removed everything.
Now I went to iTunes again to restore the entire backup I created eariler for the photos, videos, contacts and everything 20+GB.
The iTunes starts the restore process but stoppes in the middle of the progress and gives the error:
iTunes could not restore the iPhone"My iPhone Name" because the backup could not be saved on this computer.
I tried 3 times but no avail.
If my C: drive is almost full and it might be the issue, can I move my backup files to another location D: drive for example and restore them to my iPhone?
Please help me.
Thank you.I get the same issue w/ an iPad that I just updated to the latest iOS. I made the backup before upgrading the iOS. Now when i try to restore that backup made 35 min or so ago, I get this error. Help!
-
Tried everything. Still get "backup could not be saved on the computer". Have iPad 1 and Windows 7 (64 bit) with all latest updates. Now what? Is iPad 1 now incompatible with iTunes?
Have you tried here:
iOS: Troubleshooting backup issues in iTunes
Have you tried deleig the existing backup file? I\You can find it location here:
iTunes: About iOS backups
Saying your tried everything provides us with zero information as to what you did try. -
After I sync my ipod itunes is giving me the message that backup for my ipod cannot be saved on the computer does anyone know what I could do to fix this issue?
Check out this Apple document -> iTunes: "Backup could not be saved on the computer" alert message
To resolve this issue, delete the backup in iTunes Preferences and then create a new backup. If you would like to retain a copy of the backup, you can move the backup file to a different location. The backup is located in the locations below.
On Windows Vista and Windows 7:
\Users\[username]\AppData\Roaming\Apple Computer\MobileSync\Backup\
To delete the backup file:
Open iTunes Preferences by choosing iTunes > Preferences (Mac) or Edit > Preferences (Windows).
Select Devices.
Select the device backup to delete.
Click Delete Backup. iTunes will ask if you are sure you want to delete the backup. Click Delete Backup.
Click OK.
To manually create a new backup, right-click (or Control-click) iPhone on the left side of the iTunes window under Devices and choose Back Up from the shortcut menu. -
iTunes told me to delete my backup folder when I was having problems syncing my phone to my computer. After that it wouldn't work at all. After trying and trying I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet ". What the **** itunes? Nothing is working!!
I wanted to update my iTunes so I could sync my phone to my computer and update my phones software so I can use the latest apps that need a 4.2 or higher.
This is not fun for me so if anyone knows what I can do to fix this please help. Is it possible to download the "cabinent file" with the lastest iTunes?
Thank you.
-Kait
My phone is the iPhone4 and my computer is a Windows VistaI doubt that corrupt files are the problem. It is more likely a space or permissions issue. Is the hard-drive on which iTunes is stored close to capacity? Do you (or the particular user profile you have logged on with) have the requisite permissions to save to that drive?
Otherwise, do you get an error code? This might point us in the right direction. -
Storage location Data is not saving in table MARD using BAPI method.
Hi Experts,
TABLES: T001L, "Storage Locations
MARA, "General Material Data
MAKT, "Material Descriptions
MBEW, "Material Valuation
MARC, "Plant Data for Material
MARD. "Storage Location Data for Mate
DATA: BAPI_HEAD LIKE BAPIMATHEAD, "MATERIAL
BAPI_MAKT LIKE BAPI_MAKT, "Material Description
BAPI_MARA1 LIKE BAPI_MARA, "Client Data
BAPI_MARAX LIKE BAPI_MARAX,
BAPI_MARC1 LIKE BAPI_MARC, "Plant View
BAPI_MARCX LIKE BAPI_MARCX,
BAPI_MBEW1 LIKE BAPI_MBEW, "Accounting View
BAPI_MBEWX LIKE BAPI_MBEWX,
BAPI_MARD1 LIKE BAPI_MARD, "Storage location
BAPI_MARDX LIKE BAPI_MARDX,
BAPI_RETURN LIKE BAPIRET2.
DATA: BEGIN OF INT_MAKT OCCURS 100.
INCLUDE STRUCTURE BAPI_MAKT.
DATA: END OF INT_MAKT.
DATA: BEGIN OF INT_MAT OCCURS 100,
WERKS(4), "Plant
LGORT(4), "Storage location
MTART(4), "Material type
MATNR(18), "Material number
MAKTX(40), "Material description
MATKL(9) , "Material group
MBRSH(1), "Industry sector
MEINS(3), "Base unit of measure
GEWEI(3), "Weight Unit
SPART(2), "Division
EKGRP(3), "Purchasing group
VPRSV(1), "Price control indicator
STPRS(12), "Standard price
PEINH(3), "Price unit
SPRAS(2), "Language key
BKLAS(4), "VALUATION CLASS
VERPR TYPE VERPR_BAPI, "MOVING PRICE
BWTTY(1), "Valuation Catogory
MLAST(1), "Price determination
MLMAA(1), "Material Ledger
EKLAS(4), "Valuation Class for sales order stock
QKLAS(4), "Valuation Class for Project Stock
ZKPRS TYPE DZKPRS, "Future price
ZKDAT TYPE DZKDAT, "Valid From Date
BWPRS TYPE BWPRS, "Tax price 1
BWPS1 TYPE BWPS1, "Tax price 2
VJBWS TYPE VJBWS, "Tax price 3
ABWKZ TYPE ABWKZ, "Devaluatin indicator
BWPRH TYPE BWPRH, "Commercial price 1
BWPH1 TYPE BWPH1, "Commercial price 2
VJBWH TYPE VJBWH, "Commercial Price 3
XLIFO(1), "LIFO/FIFO revelant
MYPOL(4), "Pool no for LIFO
MMSTA(2), "Plant specific material status
AUSME TYPE AUSME, "Unit of issue
QMATA(6), "Material Authorization group
RBNRM(9), "Catalog Profile
WEBAZ TYPE WEBAZ, "Goods reciept processing time in days
PRFRQ TYPE PRFRQ, "Recurring Insepction
SSQSS(8), "QM Control key
QZGTP(4), "Certificate Type
QSSYS(4), "Required QM system for vendor
END OF INT_MAT.
DATA: V_MATNR TYPE MARA-MATNR.
SELECT-OPTIONS:
PLANT FOR MARC-WERKS OBLIGATORY MEMORY ID PLT,
S_LGORT FOR MARD-LGORT MEMORY ID STL,
MATERIAL FOR MARA-MATNR MEMORY ID MAT,
MATLTYPE FOR MARA-MTART MEMORY ID MTY,
DIVISION FOR MARA-SPART MEMORY ID DIV.
PARAMETERS: F_FILE LIKE RLGRAP-FILENAME
DEFAULT 'C:\DATA\ZMATERIAL.XLS' MEMORY ID F_FILE,
GETDATA AS CHECKBOX, "Tick to download materials data to local harddisk
UPDDATA AS CHECKBOX. "Tick to update date to Materials Master
IF GETDATA = 'X'.
PERFORM DOWNLOAD_DATA.
PERFORM DOWNLOAD_FILE.
ENDIF.
IF UPDDATA = 'X'.
PERFORM UPLOAD_FILE.
PERFORM UPDATE_MM.
ENDIF.
FORM DOWNLOAD_DATA.
SELECT * FROM MARC WHERE LVORM EQ ' '
AND WERKS IN PLANT
AND MATNR IN MATERIAL.
CLEAR MARA.
SELECT SINGLE * FROM MARA WHERE MATNR = MARC-MATNR.
CHECK MATLTYPE.
CHECK DIVISION.
CLEAR MBEW.
SELECT SINGLE * FROM MBEW WHERE MATNR = MARC-MATNR
AND BWKEY = MARC-WERKS.
CLEAR MAKT.
SELECT SINGLE * FROM MAKT WHERE SPRAS = 'EN'
AND MATNR = MARC-MATNR.
CLEAR MARD.
SELECT SINGLE * FROM MARD WHERE WERKS IN PLANT
AND LGORT IN S_LGORT.
WRITE:/ MARC-WERKS, "Plant
MARD-LGORT, "Storage location
MARA-MTART, "Material type
MARA-MATNR, "Material number
MARA-MATKL, "Material group
MARA-MBRSH, "Industry sector
MARA-MEINS, "Base unit of measure
MARA-GEWEI, "Weight Unit
MARA-SPART, "Division
MARC-EKGRP, "Purchasing group
MBEW-VPRSV, "Price control indicator
MBEW-STPRS, "Standard price
MBEW-PEINH, "Price unit
MBEW-BKLAS, "VALUE CLASS
MAKT-SPRAS, "Language key
MBEW-BKLAS, "Valuation Class
MBEW-VERPR, "Moving price
MAKT-MAKTX, "Material description
MBEW-BWTTY, "Valutaion Catogorey
MBEW-MLAST, "Price Determination
MBEW-MLMAA, "Material Ledger
MBEW-EKLAS, "Valuation class for Sales order stock
MBEW-QKLAS, "Valutaion Class for Project Stock
MBEW-ZKPRS, "Future Price
MBEW-ZKDAT, "Valid From Date
MBEW-BWPRS, "Tax price 1
MBEW-BWPS1, "Tax price 2
MBEW-VJBWS, "Tax price 3
MBEW-ABWKZ, "Devaluatin indicator
MBEW-BWPRH, "Commercial price 1
MBEW-BWPH1, "Commercial price 2
MBEW-VJBWH, "Commercial Price 3
MBEW-XLIFO, "LIFO/FIFO revelant
MBEW-MYPOL, "Pool no for LIFO
MARC-MMSTA, "Plant specific material status
MARC-AUSME, "Unit of issue
MARC-QMATA, "Material Authorization group
MARA-RBNRM, "Catalog Profile
MARC-WEBAZ, "Goods reciept processing time in days
MARC-PRFRQ, "Recurring Insepction
MARC-SSQSS, "QM Control key
MARC-QZGTP, "Certificate Type
MARC-QSSYS. "Required QM system for vendor
INT_MAT-WERKS = MARC-WERKS. "Plant
INT_MAT-LGORT = MARD-LGORT. "Storage Location
INT_MAT-MTART = MARA-MTART. "Material type
INT_MAT-MATNR = MARA-MATNR. "Material number
INT_MAT-MAKTX = MAKT-MAKTX. "Material description
INT_MAT-MATKL = MARA-MATKL. "Material group
INT_MAT-MBRSH = MARA-MBRSH. "Industry sector
INT_MAT-MEINS = MARA-MEINS. "Base unit of measure
INT_MAT-GEWEI = MARA-GEWEI. "Weight Unit
INT_MAT-SPART = MARA-SPART. "Division
INT_MAT-EKGRP = MARC-EKGRP. "Purchasing group
INT_MAT-VPRSV = MBEW-VPRSV. "Price control indicator
INT_MAT-STPRS = MBEW-STPRS. "Standard price
INT_MAT-PEINH = MBEW-PEINH. "Price unit
INT_MAT-SPRAS = MAKT-SPRAS. "Language key
INT_MAT-BKLAS = MBEW-BKLAS. "VALVATION CLASS
INT_MAT-VERPR = MBEW-VERPR. "MOVING price
INT_MAT-BWTTY = MBEW-BWTTY. "Valutaion Catogorey
INT_MAT-MLAST = MBEW-MLAST. "Price Determination
INT_MAT-MLMAA = MBEW-MLMAA. "Material Ledger
INT_MAT-EKLAS = MBEW-EKLAS. "Valuation class forS.O Stock
INT_MAT-QKLAS = MBEW-QKLAS. "Valutaion Class for Project
INT_MAT-ZKPRS = MBEW-ZKPRS. "Future Price
INT_MAT-ZKDAT = MBEW-ZKDAT. "Valid From Date
INT_MAT-BWPRS = MBEW-BWPRS. "Tax price 1
INT_MAT-BWPS1 = MBEW-BWPS1. "Tax price 2
INT_MAT-VJBWS = MBEW-VJBWS. "Tax price 3
INT_MAT-ABWKZ = MBEW-ABWKZ. "Devaluatin indicator
INT_MAT-BWPRH = MBEW-BWPRH. "Commercial price 1
INT_MAT-BWPH1 = MBEW-BWPH1. "Commercial price 2
INT_MAT-VJBWH = MBEW-VJBWH. "Commercial Price 3
INT_MAT-XLIFO = MBEW-XLIFO. "LIFO/FIFO revelant
INT_MAT-MYPOL = MBEW-MYPOL. "Pool no for LIFO
INT_MAT-MMSTA = MARC-MMSTA. "Plant specific material
INT_MAT-AUSME = MARC-AUSME. "Unit of issue
INT_MAT-QMATA = MARC-QMATA. "Material Authorization group
INT_MAT-RBNRM = MARA-RBNRM. "Catalog Profile
INT_MAT-WEBAZ = MARC-WEBAZ. "Goods reciept processing
INT_MAT-PRFRQ = MARC-PRFRQ. "Recurring Insepction
INT_MAT-SSQSS = MARC-SSQSS. "QM Control key
INT_MAT-QZGTP = MARC-QZGTP. "Certificate Type
INT_MAT-QSSYS = MARC-QSSYS. "Required QM system for
APPEND INT_MAT.
CLEAR INT_MAT.
ENDSELECT.
ENDFORM.
FORM DOWNLOAD_FILE.
call function 'WS_DOWNLOAD'
EXPORTING
FILENAME = F_FILE
FILETYPE = 'DAT'
FILETYPE = 'WK1'
tables
data_tab = INT_MAT
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC = 0.
FORMAT COLOR COL_GROUP.
WRITE:/ 'Data Download Successfully to your local harddisk'.
SKIP.
ENDIF.
ENDFORM.
FORM UPLOAD_FILE.
call function 'WS_UPLOAD'
EXPORTING
FILENAME = F_FILE
FILETYPE = 'DAT'
FILETYPE = 'WK1'
tables
data_tab = INT_MAT
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC = 0.
FORMAT COLOR COL_GROUP.
WRITE:/ 'Data Upload Successfully from your local harddisk'.
SKIP.
ENDIF.
ENDFORM.
FORM UPDATE_MM.
LOOP AT INT_MAT.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
INPUT = INT_MAT-MATNR
IMPORTING
OUTPUT = INT_MAT-MATNR
EXCEPTIONS
LENGTH_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Header
BAPI_HEAD-MATERIAL = INT_MAT-MATNR.
BAPI_HEAD-IND_SECTOR = INT_MAT-MBRSH.
BAPI_HEAD-MATL_TYPE = INT_MAT-MTART.
BAPI_HEAD-BASIC_VIEW = 'X'.
BAPI_HEAD-PURCHASE_VIEW = 'X'.
BAPI_HEAD-ACCOUNT_VIEW = 'X'.
Material Description
REFRESH INT_MAKT.
INT_MAKT-LANGU = INT_MAT-SPRAS.
INT_MAKT-MATL_DESC = INT_MAT-MAKTX.
APPEND INT_MAKT.
Client Data - Basic
BAPI_MARA1-MATL_GROUP = INT_MAT-MATKL.
BAPI_MARA1-BASE_UOM = INT_MAT-MEINS.
BAPI_MARA1-UNIT_OF_WT = INT_MAT-GEWEI.
BAPI_MARA1-DIVISION = INT_MAT-SPART.
BAPI_MARAX-MATL_GROUP = 'X'.
BAPI_MARAX-BASE_UOM = 'X'.
BAPI_MARAX-UNIT_OF_WT = 'X'.
BAPI_MARAX-DIVISION = 'X'.
Plant - Purchasing
BAPI_MARC1-PLANT = INT_MAT-WERKS.
BAPI_MARC1-PUR_GROUP = INT_MAT-EKGRP.
BAPI_MARC1-PUR_STATUS = INT_MAT-MMSTA.
BAPI_MARC1-ISSUE_UNIT = INT_MAT-AUSME.
BAPI_MARC1-QM_AUTHGRP = INT_MAT-QMATA.
BAPI_MARC1-GR_PR_TIME = INT_MAT-WEBAZ.
BAPI_MARC1-INSP_INT = INT_MAT-PRFRQ.
BAPI_MARC1-CTRL_KEY = INT_MAT-SSQSS.
BAPI_MARC1-CERT_TYPE = INT_MAT-QZGTP.
BAPI_MARC1-QM_RGMTS = INT_MAT-QSSYS.
BAPI_MARCX-PLANT = INT_MAT-WERKS.
BAPI_MARCX-PUR_GROUP = 'X'.
BAPI_MARCX-PUR_STATUS = 'X'.
BAPI_MARCX-ISSUE_UNIT = 'X'.
BAPI_MARCX-QM_AUTHGRP = 'X'.
BAPI_MARCX-GR_PR_TIME = 'X'.
BAPI_MARCX-INSP_INT = 'X'.
BAPI_MARCX-CTRL_KEY = 'X'.
BAPI_MARCX-CERT_TYPE = 'X'.
BAPI_MARCX-QM_RGMTS = 'X'.
Accounting 1
BAPI_MBEW1-VAL_AREA = INT_MAT-WERKS.
BAPI_MBEW1-PRICE_CTRL = INT_MAT-VPRSV.
BAPI_MBEW1-STD_PRICE = INT_MAT-STPRS.
BAPI_MBEW1-PRICE_UNIT = INT_MAT-PEINH.
BAPI_MBEW1-MOVING_PR = INT_MAT-VERPR.
BAPI_MBEW1-VAL_CLASS = INT_MAT-BKLAS.
BAPI_MBEW1-VAL_CAT = INT_MAT-BWTTY.
BAPI_MBEW1-ML_SETTLE = INT_MAT-MLAST.
BAPI_MBEW1-ML_ACTIVE = INT_MAT-MLMAA.
BAPI_MBEW1-VM_SO_STK = INT_MAT-EKLAS.
BAPI_MBEW1-VM_P_STOCK = INT_MAT-QKLAS.
BAPI_MBEW1-FUTURE_PR = INT_MAT-ZKPRS.
BAPI_MBEW1-VALID_FROM = INT_MAT-ZKDAT.
*ACCOUNTING 2
BAPI_MBEW1-TAXPRICE_1 = INT_MAT-BWPRS.
BAPI_MBEW1-TAXPRICE_2 = INT_MAT-BWPS1.
BAPI_MBEW1-TAXPRICE_3 = INT_MAT-VJBWS.
BAPI_MBEW1-DEVAL_IND = INT_MAT-ABWKZ.
BAPI_MBEW1-COMMPRICE1 = INT_MAT-BWPRH.
BAPI_MBEW1-COMMPRICE2 = INT_MAT-BWPH1.
BAPI_MBEW1-COMMPRICE3 = INT_MAT-VJBWH.
BAPI_MBEW1-LIFO_FIFO = INT_MAT-XLIFO.
BAPI_MBEW1-POOLNUMBER = INT_MAT-MYPOL.
BAPI_MBEWX-VAL_AREA = INT_MAT-WERKS.
BAPI_MBEWX-PRICE_CTRL = 'X'.
BAPI_MBEWX-STD_PRICE = 'X'.
BAPI_MBEWX-PRICE_UNIT = 'X'.
BAPI_MBEWX-MOVING_PR = 'X'.
BAPI_MBEWX-VAL_CLASS = 'X'.
BAPI_MBEWX-VAL_CAT = 'x'.
BAPI_MBEWX-ML_SETTLE = 'X'.
BAPI_MBEWX-ML_ACTIVE = 'X'.
BAPI_MBEWX-VM_SO_STK = 'X'.
BAPI_MBEWX-VM_P_STOCK = 'X'.
BAPI_MBEWX-FUTURE_PR = 'X'.
BAPI_MBEWX-VALID_FROM = 'X'.
BAPI_MBEWX-TAXPRICE_1 = 'X'.
BAPI_MBEWX-TAXPRICE_2 = 'X'.
BAPI_MBEWX-TAXPRICE_3 = 'X'.
BAPI_MBEWX-DEVAL_IND = 'X'.
BAPI_MBEWX-COMMPRICE1 = 'X'.
BAPI_MBEWX-COMMPRICE2 = 'X'.
BAPI_MBEWX-COMMPRICE3 = 'X'.
BAPI_MBEWX-LIFO_FIFO = 'X'.
BAPI_MBEWX-POOLNUMBER = 'X'.
*Storage Locations
BAPI_MARD1-PLANT = INT_MAT-WERKS.
BAPI_MARD1-STGE_LOC = INT_MAT-LGORT.
BAPI_MARDX-PLANT = INT_MAT-WERKS.
BAPI_MARDX-STGE_LOC = INT_MAT-LGORT.
WRITE:/ BAPI_HEAD-MATERIAL, BAPI_MARC1-PLANT ,BAPI_MARD1-STGE_LOC.
call function 'BAPI_MATERIAL_SAVEDATA'
exporting
HEADDATA = BAPI_HEAD
CLIENTDATA = BAPI_MARA1
CLIENTDATAX = BAPI_MARAX
PLANTDATA = BAPI_MARC1
PLANTDATAX = BAPI_MARCX
FORECASTPARAMETERS =
FORECASTPARAMETERSX =
PLANNINGDATA =
PLANNINGDATAX =
<b> STORAGELOCATIONDATA = BAPI_MARD1
STORAGELOCATIONDATAX = BAPI_MARDX</b>
VALUATIONDATA = BAPI_MBEW1
VALUATIONDATAX = BAPI_MBEWX
WAREHOUSENUMBERDATA =
WAREHOUSENUMBERDATAX =
SALESDATA = BAPI_MVKE1
SALESDATAX = BAPI_MVKEX
STORAGETYPEDATA =
STORAGETYPEDATAX =
IMPORTING
RETURN = BAPI_RETURN
TABLES
MATERIALDESCRIPTION = INT_MAKT
UNITSOFMEASURE =
UNITSOFMEASUREX =
INTERNATIONALARTNOS =
MATERIALLONGTEXT =
TAXCLASSIFICATIONS =
RETURNMESSAGES =
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
IF BAPI_RETURN-TYPE = 'E'.
WRITE:/ 'Error Message ', BAPI_RETURN-MESSAGE.
ENDIF.
ENDLOOP.
ENDFORM.
<b>i am using this bapi method to copy materials from one plant to another plant using storage location so here what happenig is everyting is going correct but only the storage location data is not saving in table mard so any body faced this kind of problem please tell me.... and one more dbt
bapi_marcx-pur_status = 'x' what is 'X' here??? is that mandatory field or required field ???
points wil be rewarded.
reagrds,
sunil k airam.In the HEADDATA structure, STORAGE_VIEW should also be set as 'X' , in order to update storage location data
for example
BAPI_HEAD-STORAGE_VIEW = 'X'.
Also, PUR_STATUS corresponds to field MARA-MSTAE whose domain has value table T141, therefore values in the field are checked against T141
Edited by: Harris Veziris on May 12, 2008 12:37 PM -
At the end of a synch I am getting the following error message "iTunes could not back up the iPod because the backup could not be saved on the computer". Any ideas on how to resolve?
See:
iOS: Troubleshooting backup issues in iTunes
Try going to iTunes>Preferences>Devices and delete the existing backup so iTunes creates an entire new one vice changing the existing one. -
Itunes could not back up iphone because backup could not be saved on the PC
I am not able to backup my iphone. After the last step it always comes up with this message "itunes could not back up iphone because backup could not be saved on the computer" . I tried all solutions mentioned earlier like changing time zone, deleting previous backups & manually backing up, changing user admin, running itunes as an admin, etc .
I guess my problem lies in the Camera roll. I deleted all my pictures in it and I am left with 3 images. I guess they are corrupt as I am not able to delete them. When I try to delete them from iphone gallery, it crashes. When I try to delete it from external devices like when its connected to PC, same problem occurs, cant delete these 3 pictures. I guess they are corrupt.
Can you please let me know what to do.I dont know want to restore to factory settinsI doubt that corrupt files are the problem. It is more likely a space or permissions issue. Is the hard-drive on which iTunes is stored close to capacity? Do you (or the particular user profile you have logged on with) have the requisite permissions to save to that drive?
Otherwise, do you get an error code? This might point us in the right direction. -
Why won't my iPhone sync with my computer? When I hook the phone up to iTunes I get a message that reads: iTunes could not back up the iPhone because the backup could not be saved on the computer. This never happened before.
Hey Janice Lucoff,
Thanks for the question. It sounds like you are experiencing issues backing up your iPhone 4s in iTunes, which is causing issues finishing the sync of your device. The following resource should help resolve your issue, as it refers to the exact error message you described:
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/TS2529
Thanks,
Matt M. -
I have a message show up on my pc (XP pro) saying "itunes could not back up , iphone, because backup could not be saved on this computer". Any ideas as to what the problem could be?
iOS: If you can't back up or restore from a backup in iTunes
-
Backup could not be saved on the computer
Everytime I try to sync my iPod touch 4g with my notebook PC running Windows 7, I get this message:
"iTunes could not back up iphone because the backup could not be saved"
I found all sorts of "solutions" on the web, none of which worked:
Delete the current backup
Run iTunes as administrator
create a new user and run iTunes
change the timezone
delete different files
running iTunes on a different computer running XP
Some jailbreak fixes - don't want to jailbreak
Any other ideas? Seems like there should be a log file somewhere that might
help. Anybody use a 3rd party tool to backup/restore?
Mikechange icloud backup to local backup on this compuet. this worked for me.
-
My hard disk crashed and the backup of my library was not saved. Fortunatly my music files are on a seperate server. How can I sync my Playlists back in my library?
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
-
We have our server set to backup to an internal HDD (E:), and then copy all the files in E: to different locations for storage (a NAS for instance). I scheduled a copy to a USB drive, but I can't get the recovery wizard to see the backup it now contains.
I choose "A backup stored in another location" and then "Remote shared folder", as the USB (G:) does not show up in Local drives. I now need to enter a UNC (it won't accept the "G:\" path), so I shared the USB drive and
enter "\\SERVER\G\2014-09-23", which is the path to the parent of the WindowsImageBackup folder on the USB drive. At this point I get the above error "The backup location does specified does not contain any backup"
All the files look to have copied OK, and have the same Date Modified as on the server: as far as I can tell it's identical, and yet it won't mount. Help?Hi,
I would like to confirm the exact backup process:
When creating the backup, are you choosing "local drives" and then "G:", or Remote shared folder and then \\server\g\folder?
If it is a network path, could you restore it with \\server\g\folder instead?
If you have any feedback on our support, please send to [email protected] -
I can't update my IPAD2 to IOS6. I've tried through ITUNEs. I get a message after IOS6 is downloaded and extracted, to the effect of "could not backup the IPAD2 because the backup could not be saved to this computer." I've tried directly from the IPAD, and by connecting through ITUNES to two separate computgers. Can anyone help? Thank you.
However after part of the Itune update completed a message came up on the screen
saying "The feature you are trying to use is on a net work resource that is unavailable.
Which particular .msi file does the message go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.) -
HT1766 Are notes saved in a backup?
Are notes saved in a backup?
yes, as long as they are stored locally and not on a syncing service
Maybe you are looking for
-
Sharing iTunes Music folder on external HD but not Mobile Applications folder?
I share the iTunes Music folder on an external HD between two separate Mac user accounts. Each user has their own iPhone and syncs within their own user account. All the media for user#1 (books, apps, etc) are in the appropriate folders in this share
-
XMP data find in CS not in CS2
Our product uses the XMP SDK version 2.9. While I would like to upgrade to a more recent version, it is not completely practical for the shipping code.<br /><br />We have encountered a file with XMP data we wrote using this SDK which is then inserte
-
Runtime.exec() opening dos window.
I heard that in newer version of java (>java 1.2 ) if Runtime.exec() is used to execute some native program, a black dos promt is popped up automatically and closed when the execution of the native program is completed. Will this happen every time I
-
I used to be with 02 never had any problems with them when travelling in Europe I'm now with BT mobile. When travelling to Bulgaria I had nothing but problems with this service. And also Cyprus. Bulgaria I had to choose from networks trying to get it
-
Display archived IDOCs in transaction WE10 - click on IDOC number
Hi experts, If you run transaction WE10 and display IDOCs not archived (from the database), from the list of IDOCs you can click on the IDOC number and then go to the screen that displays the IDOC information (Control, Data and Status records). Howev