BACKUP my Time Capsule - HELP PLS

My time capsule is all connected through WIFI but i now want the first backup done via ethernet cable. Can this be done?

Can this be done?
Not without completely re-configuring the settings on the Time Capsule again. Then you will have to re-configure yet again after the back up to return the device to your current settings.
Given the opportunities for mistakes, it might be best to leave well enough alone and allow extra time for the wireless backup.
Keep the Time Capsule and your computer relatively close to the wireless router to insure a good wireless signal and let the backup run overnight if necessary.

Similar Messages

Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error The backup disk image "/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle" could not be created (error 17). Help

Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error "The backup disk image “/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle” could not be created (error 17). Help!

Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar.
Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind.
Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item.
Also delete any other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past.
Quit Keychain Access and try again to back up.

Time Machine Data Transfer - From FireWire Drive to Time Capsule - HELP!

Time Machine Data Transfer - From FireWire Drive to Time Capsule - HELP!
I've been searching for weeks for a solution to my problem. Here's the story I've come across since I installed Leopard on Oct. 26, 2007.
I first installed Leopard on my Early 2006 MacBook and set up Time Machine with a 200GB external FireWire drive. Since then, things have been fine, until Time Machine started deleting the oldest backups. I'm a pack-rat and hated this feeling of losing data. So, I now have a few months worth of backups on my 200GB FireWire drive.
The Time Capsule is released, I finally talk myself into getting one and transferring my old data from the 200GB drive to my 1TB TC.
I did some researching through forums about how to move data from one Time Machine drive to another, so I took the concept and wanted to apply it to my Time Capsule. I made a DMG image of my 200GB drive, in order to move the data. I figured if I can make an image, copy it, and open it on the Time Capsule - all will go smoothly - just as some had mentioned they've done with external drives.
Now, I have a 164GB DMG image of my Time Machine, with no hope in sight of gaining it back. I've tried taking the image, using Disk Utility, and restoring my original 200GB external with the imaged Time Machine data, but whenever I do, I come across error messages.
In Disk Utility, I've done the following steps:
* Disk Image is found on Time Capsule
* I select the 200GB drive and select 'Restore'
* I drag and drop the Disk Image to the 'Image' field
* I drag and drop the 200GB drive into the the 'Restore' field
* Select 'Erase Destination'
* Select 'Restore'
* I get the warning message that I'll erase the drive - I proceed
* I enter my password
Error message pops up:
"Restore Failure: Could not find any scan information. The source image needs to be imagescanned/scanned for restore."
I select the image in Disk Utility, then proceed with the following steps:
* Click on "Image" then down to "Scan Image for Restore"
* I enter my password
After hours of waiting, I get another error message:
"Unable to scan. (Broken pipe)."
I'm going to see, after transferring the DMG to the Time Capsule, if I can drag-and-drop the files from the Time Capsule drive onto the 200GB hard drive.
IF anyone has any more suggestions, please let me know!

32 updates on this Mac since December 2007 - Hardware, software, OS...
They keep coming at about 6 or 7 a month. Some of them I don't care about, but several are essential. 10.5.3 has been seeded to the testers a couple of times and will probably show up in the next few weeks. Jaguar wasn't worth a d*mn until 10.2.6, Panther about 10.3.4, Tiger about 10.4.4 - I'd say we are ahead or on schedule Too bad I can't get Apple to fix Spaces. I wish they'd focus on what I want but I guess some take more time than others.
2007-12-18 00:32:39 -0800: Installed "GarageBand Update" (4.1.1)
2007-12-18 00:32:43 -0800: Installed "QuickTime Broadcaster" (1.5.2)
2007-12-18 00:33:07 -0800: Installed "Security Update 2007-009" (1.0)
2007-12-18 00:33:29 -0800: Installed "QuickTime" (7.3.1)
2007-12-19 09:32:03 -0800: Installed "MacBook MacBook Pro Software Update" (1.1)
2007-12-23 23:57:32 -0800: Installed "Security Update 2007-009" (1.1)
2008-01-16 09:18:07 -0800: Installed "iMovie Update" (7.1.1)
2008-01-16 09:18:14 -0800: Installed "Front Row Update" (2.1.2)
2008-01-16 09:18:45 -0800: Installed "iTunes" (7.6)
2008-01-16 09:19:31 -0800: Installed "QuickTime" (7.4)
2008-01-29 21:33:14 -0800: Installed "Keynote Update" (4.0.2)
2008-01-29 21:33:23 -0800: Installed "Pages Update" (3.0.2)
2008-01-29 21:33:31 -0800: Installed "Numbers Update" (1.0.2)
2008-02-02 01:18:43 -0800: Installed "iWeb Update" (2.0.3)
2008-02-05 20:12:17 -0800: Installed "iPhoto Update" (7.1.2)
2008-02-15 09:03:49 -0800: Installed "iLife Support" (8.2)
2008-02-15 09:04:17 -0800: Installed "QuickTime" (7.4.1)
2008-02-15 09:04:51 -0800: Installed "Leopard Graphics Update" (1.0)
2008-02-19 23:44:37 -0800: Installed "Keyboard Firmware Update" (1.0)
2008-02-25 19:24:33 -0800: Installed "iTunes" (7.6.1)
2008-03-03 17:14:18 -0800: Installed "GarageBand Update" (4.1.2)
2008-03-03 17:14:31 -0800: Installed "iPhoto Update" (7.1.3)
2008-03-12 18:11:36 -0700: Installed "AirPort Utility" (5.3.1)
2008-03-18 10:03:57 -0700: Installed "Safari" (3.1)
2008-03-20 13:00:58 -0700: Installed "Security Update 2008-002" (1.0)
2008-03-20 13:01:04 -0700: Installed "Time Machine and AirPort Updates" (1.0)
2008-03-21 22:49:16 -0700: Installed "Digital Camera RAW Compatibility Update" (2.0)
2008-04-03 00:50:22 -0700: Installed "Front Row Update" (2.1.3)
2008-04-03 00:50:50 -0700: Installed "QuickTime" (7.4.5)
2008-04-03 00:51:58 -0700: Installed "iTunes" (7.6.2)
2008-04-08 17:16:02 -0700: Installed "Keynote Update" (4.0.3)
2008-04-08 17:16:08 -0700: Installed "MacBook Pro EFI Firmware Update" (1.5)

Suddenly extremely slow Time Machine backups on Time Capsule

My Time Machine backups on Time Capsule have been pretty good in the last few months. In the last week or so I am seeing painfully slow backups. It's not the preparing or the finishing phase, it's the backup itself. Data transfer for other apps is fine. The backup transfers about 50 Kb per second. In more than 3 hours it backed up about 600 Mb. Here's what I get from the Console:
11/26/08 4:22:07 PM /System/Library/CoreServices/backupd[1281] No pre-backup thinning needed: 1.28 GB requested (including padding), 730.31 GB available
11/26/08 5:50:47 PM /System/Library/CoreServices/backupd[1281] Bulk setting Spotlight attributes failed.
11/26/08 6:12:40 PM /System/Library/CoreServices/backupd[1281] Bulk setting Spotlight attributes failed.
11/26/08 6:51:37 PM /System/Library/CoreServices/backupd[1281] Bulk setting Spotlight attributes failed.
11/26/08 7:05:44 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:05:46 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:05:46 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:07:05 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:07:05 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:09:06 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:09:13 PM /System/Library/CoreServices/backupd[1281] Error: (-39) SrcErr:YES Copying (null) to (null)
11/26/08 7:09:14 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:09:14 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:12:15 PM /System/Library/CoreServices/backupd[1281] Bulk setting Spotlight attributes failed.
Any clue? What happened? (I did an Airport-related upgrade recently)
My set up is a Time Capsule and an Airport Extreme.

Well, this link has a video describing a downgrade:
http://www.mefeedia.com/entry/airport-extreme-and-time-capsule-firmware-downgrad ing/11537477/
It has been mentioned in apple discussions here as well, but with no other information than that it has helped some people.
Message was edited by: Karl Ivar Dahl

My backup to Time Capsule is taking over 4 million days. How can I shorten the time? I am not able to connect through ethernet. How do I fix this?

My backup to Time Capsule is taking over 4 million days. How can I shorten the time? I am not able to connect through ethernet. How do I fix this?
Not only that but my Mac Pro keep running and does not stop, my Address book has a blue light under it but wont open, the light for my monitor in the bottom right corner wont turn on or off. Please need help...

It sounds like there is an issue with the Mac itself.
Use the verify disk A5 in troubleshooting.
http://pondini.org/TM/Troubleshooting.html
Even if you cannot connect by ethernet, at current location.. you can simply disconnect the TC from the network and bring it to the Mac and plug it in by ethernet. The TC can be reset if you haven't got a suitable current setup (save previous setup before you change it) and run just as backup device.. do the backup and then return it to the network.
If this is just a standard incremental backup.. then something has broken. The issue is not the TC pe se but failure in hardware somewhere.

Kernel panic with wifi backup to Time Capsule

I have had no problem with wireless backup to Time Capsule until recently when I would consistently get a kernel panic during the backup. Is it a corrupt file? How would I isolate it? Or could it be a directory problem that DiskWarrior would fix? I can mount the backup image on my desktop OK.
I suppose I could erase my backup image on the Time Capsule, but I dont want to lose all that data. And if I did, what is the best way to archive that TIme Capsule backup image?
Thanks for any help.

Arthur Simonsen wrote:
I have had no problem with wireless backup to Time Capsule until recently when I would consistently get a kernel panic during the backup. Is it a corrupt file? How would I isolate it? Or could it be a directory problem that DiskWarrior would fix? I can mount the backup image on my desktop OK.
First, Repair your backups per #A5 in the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.
If that doesn't help, here's a bunch of kernel panic info:
Apple Support - About kernel panic messages
Mac OS X Kernel Panic FAQ
The X Lab - Resolving Kernel Panics
Apple Developer - Technical Note TN2063: Understanding and Debugging Kernel Panics
Tutorial: Avoiding and eliminating Kernel panics
I suppose I could erase my backup image on the Time Capsule, but I dont want to lose all that data. And if I did, what is the best way to archive that TIme Capsule backup image?
If your backups are ok, erasing the drive probably won't help. But to "archive" the backups, see this Apple article: http://support.apple.com/kb/HT1281

Time Machine couldn't complete the backup to "Time Capsule. The backup disk image /Volumes/Data/MacBook Pro.sparsebundle could not be created (error 60)"

We are Mountain Lion using Time Machine to backup to Time Capsule. When the backup tries to run, an error appears after a couple of minutes saying "The disk you inserted was not readable by this computer." Then an error shows up saying "Time Machine couldn't complete the backup to "Time Capsule.The backup disk image /Volumes/Data/MacBook Pro.sparsebundle could not be created (error 60)"
I low level reformatted the Time Capsule and that didn't fix it. I then tried using Time Machine on another computer to back up to that same Time Capsule and it worked- so I'm doubting it's the Time Capsule.
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
However, after a couple of minutes- it comes back saying that the disk is unreadable.
I think it's something wrong with either creating the sparsebundle or opening the disk image that seems to be a part of the Time Machine backup process on the local drive.
I am able to create a disk image with Disk Utilitiy without any problem on that system. I've repaired the disk and disk permissions with Disk Utility and replaced the directory with Disk Warrior. I've trashed what preference files I could find and restarted. I've completely removed the backup destination from the computer and added it back again.
Help!
Thanks,
Neil

neillhowell wrote:
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
Yes, exactly. It makes one sparse bundle per Mac.
It's possible the TC's disk is too full for a new sparse bundle, or there may be some other problem.
Via the Finder, locate the existing sparse bundle (see the pink box in Time Machine - Frequently Asked Question #17 if you're not sure how to do that). See how large it is (plus how large anything else that may be there). If the total is very near the size of the TC, that may be the problem.
If not, a clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question (probably the first one displayed), then copy and post all the messages here.

Mavericks don't see my backup in Time Capsule

Good morning guys .
My Mac was too slow because of many updates coming , and decided to do a " clean" installation of Mavericks .
Before , I did as the usual backup on Time Capsule .
After installation , I try to restore the backup and migration wizard by surprise: the Mavericks don't see the backed up .
Note : I can access the Time Machine , in Finder , it mounts , I see that everything is there , but the backup is not read by the migration wizard .
I did several things I saw on the forum and the closest I came was to create a new backup , and then try to restore again the migration wizard or the system restore, this reads like the Mavericks backup but surprise, only backup that I created or backups made in 2012 ( before the system can be upgraded to the Mavericks ) . All backups made in 2013 he did not read , it is as if there were .
Has anyone experienced this and can help me ?
My mac : Macbook Pro 13 Late 2011 2.8 Ghz Intel Core i7 , 8GB Ram
Regards and thank you .
Daves

ruderudy,
If you don't see any Movies underneath the "Sync Movies" portion, a good step to try is resetting sync history.
Mac OS X 10.5: Resetting the SyncServices folder
http://support.apple.com/kb/TS1627
Hope this helps,
Raleigh

Time Machine backup to Time Capsule stopped ...

Time Machine backup to Time Capsule stopped ... and seemingly endlessly keeps on preparing for the next backup. Did anyone encounter this problem too? Thanks! Daniel

7/4/08 9:13:06 AM com.apple.backupd[250] 2008-07-04 09:13:06.613 diskimages-helper[297:1603] Error loading /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin: dlopen(/Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/Ma cOS/VirtualPCDiskImagePlugin, 262): no suitable image found. Did find:
7/4/08 9:13:06 AM com.apple.backupd[250] /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin: mach-o, but wrong architecture
7/4/08 9:13:06 AM com.apple.backupd[250] 2008-07-04 09:13:06.614 diskimages-helper[297:1603] Cannot find function pointer MacDiskImagePluginFactory for factory 7F1FD83E-6684-11D8-968F-000A957703C0 in CFBundle/CFPlugIn 0x51fa30 </Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle> (bundle, not loaded)
7/4/08 9:13:07 AM com.apple.backupd[250] 2008-07-04 09:13:07.110 diskimages-helper[297:1603] Error loading /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin: dlopen(/Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/Ma cOS/VirtualPCDiskImagePlugin, 262): no suitable image found. Did find:
7/4/08 9:13:07 AM com.apple.backupd[250] /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin: mach-o, but wrong architecture
7/4/08 9:13:07 AM com.apple.backupd[250] 2008-07-04 09:13:07.111 diskimages-helper[297:1603] Cannot find function pointer MacDiskImagePluginFactory for factory 7F1FD83E-6684-11D8-968F-000A957703C0 in CFBundle/CFPlugIn 0x51fa30 </Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle> (bundle, not loaded)
7/4/08 9:13:08 AM /System/Library/CoreServices/backupd[250] Disk image /Volumes/Doug's Time Capsule-1/G4’s Computer_0016cb843ff6.sparsebundle mounted at: /Volumes/Backup of G4’s Computer
7/4/08 9:13:08 AM /System/Library/CoreServices/backupd[250] Backing up to: /Volumes/Backup of G4’s Computer/Backups.backupdb
7/4/08 9:13:12 AM /System/Library/CoreServices/backupd[250] Event store UUIDs don't match for volume: Hard Drive
7/4/08 9:13:12 AM /System/Library/CoreServices/backupd[250] Forcing deep traversal on source: "Hard Drive" (mount: '/' fsUUID: C5625712-89CC-3B4B-99B9-F6DB1DC28614 eventDBUUID: F6938DB2-A057-4D7E-A9FC-9BF0AD86DC9D), {1, 1, 1, 0}
7/4/08 9:13:12 AM /System/Library/CoreServices/backupd[250] Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonForceDeepBackup|

HT3275 Time Machine couldn't complete the backup to "Time Capsule" because "-.sparsebundle" is already in use.

How do I correct ‘Time Machine couldn’t complete the backup to “Time Capsule” because “….sparsebundle” is already in use‘?.

Check out the More Like This column to the right.
Our most popular problem.. 6-10 times a day..
There is a bug.. fix is to pull the power from the TC.. count to 10 and power the TC again.
See C12 here if you need more help.
http://pondini.org/TM/Troubleshooting.html

How do I remove a backup from Time Capsule?

How do I remove a backup from Time Capsule? It is taking up 250 GB on the capsule and I wish to remove it.
I do not wish to erase the Time capsule since I have another backup on there I wish to keep.

Then you use the TM application to manage the backups. See:
A whole lot about Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.

I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?

I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?

It must have found the old backup corrupt.. so you will more than likely have little choice. You can archive off the old backup if it is still useful.
You can also verify it. See A5 http://pondini.org/TM/Troubleshooting.html
He also has some info on this problem. eg C13.

I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

On your Mac.......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click on the Disks tab at the top of the window
Click Erase Disk
On the next window that appears, select the Quick Erase option, then click Erase
The operation will only take a few minutes.
Now you are ready to start new backups of both Macs. Back up one Mac first, then back up the other. Do not try to back up both Macs as the same time.

How to backup from Time Capsule to external HD?

How to set up files backup from Time Capsule to external HD?
Here is configuration: MacBook + MacAir + Time Capsule (which I use as a storage) + 2Tb WD MyPassport (USB connected to TimeCapsule)
I keep files like photos on TimeCapsule to be available by WiFi and I want to set up my Time Machine to backup picture folder from TimeCapsule to MyPassport HD.

Time Machine can't back up a network volume. You'll have to use third-party software. I don't have a specific recommendation. There is no efficient way at all to back up a Time Capsule, which is why it should only be used as a backup destination, not as a general-purpose file server.

Time Machine couldn't complete the backup to time capsule-the backup disk is not available

Time Machine couldn’t complete the backup to time capsule-the backup disk is not available

Reboot the network in correct order.. modem.. router/TC.. clients.. 2min gap.
This is just standard windows.. woops, Mac OS networking now.

BACKUP my Time Capsule - HELP PLS

Similar Messages

Maybe you are looking for