Backup not completed,

Backup Not compled MSG displaed each time when try to process backup.
What should I do?

Hello, Staplesg.
Thank you for visiting Apple Support Communities.
Here are a couple articles that you may find helpful in troubleshooting your iOS backup issue.
iCloud: Troubleshooting creating backups
http://support.apple.com/kb/TS3992
iOS: If you can't back up or restore from a backup in iTunes
http://support.apple.com/kb/ts2529
Regards,
Jason H.

Similar Messages

HT3275 Time Machine backup not completed because "the backup disk image ....sparsebundle already in use"

Time Machine backup not completed because the "backup disk image"/Volumes/Data/MacBookAir.sparsebundle" is already in use. ??

Reboot the TC.. this is most common issue since Mountain Lion.
Look at the More Like This just on the right column.

HT5569 Backup started then after two hours Message " prior backup not completed"

Successfully connected to WI FI trying to back up my contacts, etc. Entered "Back up Now" and backup started with the message " expected completion time: two hours. Did not touch the phone. After two hours, I checked the phone. Got message" Prior Backup not completed". Al Aloisi .

Is iPhone in wall power charger?

HT1414 being asked for backup phone passworde to continue. tried apple id and passcode for keyboard lock but wont accept . i know of no other password . anyone run into this ? right after i loaded update it said backup not complete and asked for password

does anyone know what password they are looking for when asked to backup phone? tried apple id and keyboard lock password but no luck ? was asked after update said backup not complete please enter password?

I think it is asking for the password for your encrypted backup.
Encrypted backup
http://support.apple.com/kb/ht4946

Time Machine backup not completed with error "The disk was not ejected probably..."

I have been using an UBS 3.0 capable external 2.5" hard drive from Lacie to backup my old 21.5" iMac for the last 2 years without problem.
Recently I bought the new late 2013 27" iMac running 10.8.5 and try to migrate the data from the Time Machine backup without success. After a while, Mountain Lion complained with the below error and only data before this message appear were migrated. When I connected the same disk back to my old iMac and ran disk utility, everything looks fine and I was able to complete the TM backup. Eventually, I managed to migrate the data using network copy, instead of TM backup.
Now that my new iMac is back online and I tried to setup Time Machine backup using the same 2.5" Lacie drive, the same error message appeared again in the middle of TM backup (after 3 minutes).
Wonder if anyone ran into the same issue and if there is an issue with the UBS 3.0 port on the new iMac, or there is a work around to this problem.
Any help or pointer would be highly appreciated.
Cheers,
Richard

The system is losing connection with the drive for some reason, likely because the drive is losing power and unmounting, but there could be other reasons as well. Do you have access to an external power supply for the drive? If so then connect tthat so it is not relying on the USB bus power to keep the drive running. I have also found this to happen with some USB 3.0 enclosures, and it appears to be a compatibility issue with them and Apple's USB 3.0 drivers, so another option is to get a USB 2.0 hub and use that for the connection. Things will not run at USB 3.0 speeds, but the drives will not continually disconnect.

HOME FILE BACKUP NOT COMPLETE

one of the backups i do is to copy my 'home' file (found in the user file)
on my hd to an exterior hard drive. lately, maybe after installing snow leopard, i've been having an issue. it stops
copying and i get a prompt 'the operation can't be completed because you don't have permission to access 'RPDLAgentHelperD'.
when you look at the 2 files there is a difference of 20gb. so 20gb did not copy.
i did a permissions verification and repair on all my drives using disk utility and the same thing occurs.
any ideas?

google search indicates that this file is installed by RealPlayer and is located in /Users/<username>/Library/ApplicationSupport/RealNetworks/RPDLAgentHelperD. locate it in finder and check permissions on it. what are they? also, are you backing up your home folder by manually copying it to an external?! this is one of the most inconvenient ways to back up one can find. there are LOTS of great backup tools in snow leopard starting with built in Time Machine. I recommend you use one of those.

Time Machine backup not complete?

I've had Time Machine running now succesfully for a while.
HOWEVER ... a week ago my machine all of a sudden came to a grinding halt, with the internal HD becoming unresponsive.
After a lot of checking for solutions online, I've decided to erase the HD, and restore a former system thru TimeMachine.
The internal HD is still not functioning properly, but when I start up from an external HD, I can see it in Finder. When I check the contents, however, it does not seem to contain my applications!
I thought TM was supposed to make a full system backup?
Or maybe I'm looking in the wrong place?
Also, it now takes AGES for a folder to open on the restored drive. Is this normal?

TC-Productions wrote:
I've had Time Machine running now succesfully for a while.
HOWEVER ... a week ago my machine all of a sudden came to a grinding halt, with the internal HD becoming unresponsive.
After a lot of checking for solutions online, I've decided to erase the HD, and restore a former system thru TimeMachine.
Exactly how did you do the restore?
The internal HD is still not functioning properly, but when I start up from an external HD, I can see it in Finder. When I check the contents, however, it does not seem to contain my applications!
I thought TM was supposed to make a full system backup?
Or maybe I'm looking in the wrong place?
Since there's a problem on the internal, don't trust anything you see there. When you start up from the external, use Time Machine to see what's on the Time Machine backups, via the "Star Wars" display. Unless you excluded the Applications folder via TM Preferences > Options, it should be there.
Also, it now takes AGES for a folder to open on the restored drive. Is this normal?
If the drive is failing, don't count on anything being normal!

"Time Machine could not complete the backup. The backup disk is not availab

I have a Seagate 750 MB external disk connected to the USB port of my Airport Extreme Base Station. It worked fine with Time Machine under Leopard but it's not working the way it was under OS X 10.6.2. I'm hopeful someone can help me solve the problem.
Let's say the name of my Airport Extreme Base Station is "Airport." If I remember correctly, under Leopard time machine would start a wireless backup not long after I turned on the Seagate drive. That no longer happens.
I've erased and re-formatted the Seagate drive with 2 GUID partitions, one for my 24" iMac and one for my 17" MacBook Pro. Both computers are about 3 years old. In order to do the re-partitioning, I had to unplug the Seagate drive from the base station and plug it into one of the iMac's USB ports. If I didn't do this, nothing other than the iMac's drive appears in the left pane of Disk Utility, although the name of my base station, i.e, "Airport" does appear in the Finder and PathFinder (a replacement for Finder that I use).
In fact, Time Machine works under 10.6.2. as long as the Seagate drive is plugged into the iMac's USB port. As soon as I plug the Seagate drive into the USB port of the base station, Time Machine no longer works. The backup is "delayed." When I click on "Back Up Now" a few seconds go by and I get the following dialog box: "Time Machine could not complete the backup. The backup disk is not available."
In my Airport Extreme Base Station setup (Airport Utility version 5.4.2), the "Disks" pane sees both partitions on the Seagate drive. File sharing is enabled on the "File sharing" pane and "Secure Shared Disks:" is set to "With a disk password." "Airport Disks Guest Access:" is not allowed, nor is "Share disks over WAN."
When the Seagate drive is plugged into the base station and I click on "Airport" in the Finder or PathFinder, I'm prompted for the password I mentioned above because the shared disks are secured with a password. Once the password is typed, both partitions on the Seagate drive appear in Finder and PathFinder. When I try a Time Machine backup at this point, I get the same error I described above, i.e., "Time Machine could not complete the backup. The backup disk is not available."
One last thing, I did an "Archive and Install" when I upgraded to Snow Leopard since I thought the changes were relatively minor as compared with past OS X upgrades. Normally, I do a clean install but didn't feel like it this time. I also tried deleting the file /Library/Preferences/com.apple.TimeMachine.plist to no avail and restarted my iMac to no avail.
At this point I'm completely stumped. As I said, Time Machine works as long as the Seagate drive is plugged directly into one of the iMac's USB ports as opposed to the base station's USB port. But doesn't this defeat the purpose of having wireless backup? Once again, the wireless backup worked fine under 10.5.8.
I hope my message is clear and a solution would be most welcome.
Thank you,
Richard

I'm having the same problem. If my TimeMachine drive is not connected, I'll get the "Time machine could not complete the backup" "The backup disk is not available" warning a couple times a day. This is extremely problematic if I'm giving a presentation. I have tried changing my TimeMachine drive, removing that drive, repairing permissions, and have not been able to solve the problem.
Please help!

HT3275 I get the following message - "Time Machine could not complete the backup." "Unable to complete backup." "An error occurred while creating the backup folder.""

I get the following message - "Time Machine could not complete the backup." "Unable to complete backup. An error occurred while creating the backup folder.""
This MAC is partioned with Windows 7 with only 50 gig devoted to Windows so my son can play Flight Simulator X on the machine.
I have a WD Passport External Hard Drive for the Back Up
I have spoken with WD Tech Support and they have been fantastic but I still keep getting this message. Any thought?
Maxx

Reboot the TC.. it sometimes gets lost on the network.. are you still actually using 10.6.8 as the problem is more prevalent on Lion and ML it seems is no better.
You might find reset of the TC is needed. change the names to short, no spaces pure alphanumeric.
Reset the TM to the new name.. use the A4 in Pondini's great KB.
http://pondini.org/TM/Troubleshooting.html

TS2529 I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.

I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.

Hi, I disabled the antivirus and the firewall. Same result
I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
My iphone 5 is not jailbroken, and is a factory unlocked phone.
Any other suggestion?
Pls help

HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. Could not complete backup to media share. The network backup disk does not support the required AFP feat

Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?

This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

HT3275 For the past several days, I have been getting this message during backups: Time Machine could not complete the back up. The backup disk image "Volumes/Data/iMac.sparsebundle" could not be accessed (error-1).

For the past several days, I have been getting this message during backups:
Time Machine could not complete the back up. The backup disk image "Volumes/Data/bhoppy2's iMac.sparsebundle" could not be accessed (error-1). When I click on the 'help' icon on the message, it reverts to a blank page, and I cannot find anything online regarding the term 'sparsebundle.' In addition, I cannot access previous backups any longer.
Help?

See C17 in Time Machine Troubleshooting by Time Machine guru Pondini:
http://pondini.org/TM/Troubleshooting.html

I get this error message when I try to back up my laptop: Time machine could not complete the backup. The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle is already in use. Anyone know how to fix it?

I get this error message when I try to back up my laptop:
' Time machine could not complete the backup. The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle' is already in use. "
Anyone know how to fix it?

Reboot the TC.. Sometimes you need to reboot the whole network.
This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
Read C12 in pondini.
http://pondini.org/TM/Troubleshooting.html
C17 can be related I think.

HT1218 ?My time machine could not complete back up. Says backup disk image"/volumes/data/name's iMac.sparsebundle" could not be accessed error 1??

Time Machine could not complete the backup.
The backup disk image "/Volumes/Data/Name's iMacsparsebundle" could not be accessed (error -1 )

I checked the pondini fixes and ended up doing the following - in case this could help someone else with OSX Lion and Time Capsule... http://pondini.org/TM/Troubleshooting.html
First, I downloaded and used Airport Utility 5.6 instead of 6.1 - BTW, I had to attempt download and installation THREE times before the program actually installed. Be persistant.
Pondini #5: It's possible some names (of all things!) may be a problem. See item C9. I had to re-name my Mac, Time Capsule, network, etc... to remove all apostrophes and spaces.
Pondini #7: If you have WD SmartWare installed on Lion, it's not compatible, per RoaringApps, and there are reports it can cause this problem as well. Use Western Digital's uninstaller, or delete the app from /Applications and the files com.wdc.WDDMservice.plist and com.wdc.WDSmartWareServer.plist from /Library/LaunchDaemons. There may also be a file in Library/Application Support.
I then had to shut down computer, unplug Time Capsule, unplug modem; plug everything in again, then reboot computer; then had to go to Apple- System Preferences- Network- and reselect my Time Capsule to connect to WiFi again.
Then opened Time Machine preferences again and attempted back up - it worked!

My Macbook pro Early 2008 is randomly slow at starting up and when I am backing up to my time capsule I am receiving the following message 'Time machine could not complete the backup. '' ''The backup disk image ''/Volumes/name time capsule/ my name MacBoo

My Macbook pro Early 2008 is randomly slow at starting up and when I am backing up to my time capsule I am receiving the following message 'Time machine could not complete the backup. '' ''The backup disk image ''/Volumes/name time capsule/ my name MacBook Pro (4).sparsebundle'' could not be accessed (error-1).
Problem started after deleting parrell desktop and window7 ?
Please help?

Look at the more like this column on the right.. this is the most frequently asked question in this discussion area.
Reboot the TC.. restart the whole network if the simple reboot did not work.. start in order. modem.. router/TC.. clients. 2min gap.
Read C12 here. http://pondini.org/TM/Troubleshooting.html

Backup not completed,

Similar Messages

Maybe you are looking for