Backup notification issue 11GR2 RAC on Windows

Hi all
I have recently set up a full and incremental backup scheduled jobs. I can see in OEM that these have a Target Type of Cluster Database. I was wanting to set up notifications against these jobs, so went into preferences > notifications > rules and created a new rule. In here I selected the type as Cluster Database and went to the jobs tab, upon where I could see no jobs appearing.
I thought that was strange so I tried to query against the mgmt$jobs view to see if I could see my jobs, but I got an error of:
ORA-01722: invalid number
01722. 00000 - "invalid number"
*Cause:
*Action:
I am using the latest version of SQL developer but also get the same at the command line.
I did a bit of research against the error and found that this was a bug in 10g but was fixed in R5 I believe. I am wondering if the jobs are not appearing in the notifications due to it not being able to query this view? Also is anyone else experiencing this issue?
Thanks
Edited by: Kwisatz78 on Jul 14, 2011 7:43 AM

Hello,
I thought that was strange so I tried to query against the mgmt$jobs view to see if I could see my jobs, but I got an error of:
ORA-01722: invalid number
01722. 00000 - "invalid number"
*Cause:
*Action:
I am using the latest version of SQL developer but also get the same at the command line. I'm just talking about the View MGMT$JOBS which gives the error ORA-01722 when you query it, and thus preventing you from checking the Jobs.
This View is just a Query that you may extract DDL from SQL Developer.
The Note of MOS gives the part of the code which doesn't work. So, it may help to create another Query which could let you check the Jobs, and store it as a User-defined Report in SQL Developer.
It's just a suggestion.
Best regards,
Jean-Valentin

Similar Messages

OCR recovery/restore from backup or ocrmirror 11gr2 RAC

Say i have an OCR and OCRMIRROR on asm diskgroup CRS_OCR ,CRS_OCRMIRROR diskgroups with external redundancy.If i lost one of the diskgroup say CRS_OCR how can i copy over from the OCRMIRROR to restore the primary OCR?or how can i go about restoring the primary ocr ?Please any help on this would be a helpful...
Thanks
Edited by: user9097501 on Oct 18, 2010 6:28 AM
Edited by: user9097501 on Oct 18, 2010 6:32 AM

Hi,
Loss of the Oracle Cluster Registry file affects the availability of RAC and Cluster Ready Services.
The OCR file can be restored from a physical backup that is automatically created or from an export file that is manually created by using the ocrconfig tool.
Additionally, starting with Oracle Database 10g Release 10.2, Oracle can optionally mirror the OCR so that a single OCR device failure can be tolerated.
Check This..
*How to restore ASM based OCR after complete loss of the CRS diskgroup [ID 1062983.1]*
Regards,
Levi Pereira

Oracle 11gR2 RAC Backup & Recovery

I am new to Oracle RAC, I have installed Oracle 11gR2 RAC (2 node) on HP-UX with ASM, configured FRA location on ASM.
Now I would like to configure RMAN backup, Can someone give some idea or document to setup RMAN backup for Oracle 11gR2 RAC.
- Mano

ManoRangasamy wrote:
I am new to Oracle RAC, I have installed Oracle 11gR2 RAC (2 node) on HP-UX with ASM, configured FRA location on ASM.
Now I would like to configure RMAN backup, Can someone give some idea or document to setup RMAN backup for Oracle 11gR2 RAC. There won't be any different settings for RMAN for RAC except for where and how you would be configuring the Archive logs and place your backups. Both, ideally speaking, should be on the shared storage like ASM but there are other combinations also possible. Review the above given links for the same. That should provide a good starting point.
Aman....

11gR2 RAC install on Windows 2008 R2

I am installing three node rac on windows 2008 and I am successfully able to install Grid Infrastructure with ASM as soon I complete this install server1 disconnect me from remote console and I got blue screen error when I log in back and same error appears on server 3 after few minutes. I bounce all there machines and continue database creation part same problem appears again Need help to understand the problem.
Do we need to set some kind of registery settings, or any parameter etc.
Server Configurations.
All three servers have same configurations.
Server 1 ,2 ,3
OS : windows 2008 R2 64 bit
Processor: Intel(R) xeon(R) CPU E5540 @2.53GHZ (2 processors)
Memory: 32G
SAN storage :netapp san
Error Message:
Problem signature:
Problem Event Name:     BlueScreen
OS Version:     6.1.7600.2.0.0.274.10
Locale ID:     18441
Additional information about the problem:
BCCode:     fffe
BCP1:     0000000000000000
BCP2:     0000000000000000
BCP3:     0000000000000000
BCP4:     0000000000000000
OS Version:     6_1_7600
Service Pack:     0_0
Product:     274_3
Files that help describe the problem:
C:\Windows\Minidump\063010-13868-01.dmp
C:\Users\svc-btmoraadmin\AppData\Local\Temp\WER-773546-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

In the first place a 'blue screen' has to be analyzed on the OS side, Oracle COULD be the reason, but who knows? More likely a hardware problem (RAM,disk storage). So you have to ask your system administrator and/or call Microsoft support. Or you try to find an answer in one of the many articles in the web, for example this:
http://www.maximumpc.com/article/features/blue_screen_survival_guide
Werner

Oracle 11gR2 RAC in LDOM Network issue

Hi, Requesting your expert advise regarding this configuration.
We are implementing LDOM 2.2 on two SPARC T4-4 for Oracle 11gR2 RAC; Solaris 10 U10 on both control and guest domain. The setup for each primary/control domain is: Two 10g links aggregated and have four VLAN trunked on the aggregate. vSwitch created using the aggr as the device as following per T4-4:
NOTE: VLAN 1501 is for data connection and VLAN 10 is for heartbeat for one RAC cluster and VL 1601 and 11 is for another RAC. all together four LDOMS.
ldm add-vswitch vid=1501,1601,10,11 net-dev=aggr1 primary-vsw0 primary
ldm add-vnet pvid=1501 vnetprod primary-vsw0 guest1
ldm add-vnet pvid=10 vnethb primary-vsw0 guest1
ldm add-vnet pvid=1601 vnetprod primary-vsw0 guest2
ldm add-vnet pvid=11 vnethb primary-vsw0 guest2
vnet inside the LDOM are not tagged:
vnet1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 10.220.128.20 netmask ffffff80 broadcast 10.220.128.127
ether 0:14:4f:f9:ec:7f
vnet2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
inet 192.168.2.11 netmask ffffff80 broadcast 192.168.2.127
ether 0:14:4f:fb:2b:8f
Here is the whole configuration:
root@gp-cpu-suh004 # ldm -V
Logical Domains Manager (v 2.2.0.0)
Hypervisor control protocol v 1.9
Using Hypervisor MD v 1.4
System PROM:
Hostconfig v. 1.2.0. @(#)Hostconfig 1.2.0.a 2012/05/11 07:34
Hypervisor v. 1.11.0. @(#)Hypervisor 1.11.0.a 2012/05/11 05:28
OpenBoot v. 4.34.0 @(#)OpenBoot 4.34.0 2012/04/30 14:26
root@gp-cpu-suh004 # ldm ls
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- UART 32 16G 2.5% 48m
oidrac1 active -n---- 5000 32 16G 0.0% 27m
root@gp-cpu-suh004 # ldm ls -l
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- UART 32 16G 3.1% 48m
SOFTSTATE
Solaris running
UUID
e73421fe-7003-e748-be7e-801fee5bfcc7
MAC
00:21:28:f1:95:26
HOSTID
0x85f19526
CONTROL
failure-policy=ignore
extended-mapin-space=off
cpu-arch=native
DEPENDENCY
master=
CORE
VCPU
MEMORY
RA PA SIZE
0x20000000 0x20000000 16G
CONSTRAINT
threading=max-throughput
VARIABLES
auto-boot-on-error?=true
auto-boot?=true
boot-device=/pci@400/pci@1/pci@0/pci@0/LSI,sas@0/disk@w5000cca0251e7a29,0:a
keyboard-layout=US-English
nvramrc=." ChassisSerialNumber 1207BDYFFE " cr
use-nvramrc?=true
IO
DEVICE PSEUDONYM OPTIONS
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
VSW
NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt 00:14:4f:fb:75:c0 igb1 0 switch@0 1 1 1500 on
primary-vsw0 00:14:4f:fa:33:8b aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 rootoid /dev/dsk/c14t50060E8005BFAA04d1s2
data_oid /dev/dsk/c14t50060E8005BFAA04d2s2
ocr_oid /dev/dsk/c14t50060E8005BFAA04d3s2
VCONS
NAME SERVICE PORT
UART
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
oidrac1 active -n---- 5000 32 16G 0.0% 27m
SOFTSTATE
Solaris running
UUID
0fcbbf21-14a2-eb21-f544-d4424212f3ef
MAC
00:14:4f:f9:1b:d4
HOSTID
0x84f91bd4
CONTROL
failure-policy=ignore
extended-mapin-space=off
cpu-arch=native
DEPENDENCY
master=
CORE
CID CPUSET
VCPU
VID PID CID UTIL STRAND
MEMORY
RA PA SIZE
0x20000000 0x420000000 16G
CONSTRAINT
threading=max-throughput
VARIABLES
auto-boot?=true
boot-device=disk:a
keyboard-layout=US-English
NETWORK
NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
vnet1 primary-vsw-mgmt@primary 0 network@0 00:14:4f:fa:61:77 1 1500
vnetprod primary-vsw0@primary 1 network@1 00:14:4f:f9:ec:7f 1501 1500
vnethb primary-vsw0@primary 2 network@2 00:14:4f:fb:2b:8f 10 1500
DISK
NAME VOLUME TOUT ID DEVICE SERVER MPGROUP
oneidrootdisk rootoid@primary-vds0 0 disk@0 primary
oid_data data_oid@primary-vds0 1 disk@1 primary
oid_ocr ocr_oid@primary-vds0 2 disk@2 primary
VCONS
NAME SERVICE PORT
oidrac1 primary-vcc0@primary 5000
root@gp-cpu-suh004 # ldm ls-services
VCC
NAME LDOM PORT-RANGE
primary-vcc0 primary 5000-5100
VSW
NAME LDOM MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt primary 00:14:4f:fb:75:c0 igb1 0 switch@0 1 1 1500 on
primary-vsw0 primary 00:14:4f:fa:33:8b aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
VDS
NAME LDOM VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 primary rootoid /dev/dsk/c14t50060E8005BFAA04d1s2
data_oid /dev/dsk/c14t50060E8005BFAA04d2s2
ocr_oid /dev/dsk/c14t50060E8005BFAA04d3s2
root@gp-cpu-suh004 # dladm show-link
vsw0 type: non-vlan mtu: 1500 device: vsw0
vsw1 type: non-vlan mtu: 1500 device: vsw1
vsw1501001 type: vlan 1501 mtu: 1500 device: vsw1
igb0 type: non-vlan mtu: 1500 device: igb0
igb1 type: non-vlan mtu: 1500 device: igb1
qlge0 type: non-vlan mtu: 1500 device: qlge0
qlge1 type: non-vlan mtu: 1500 device: qlge1
qlge2 type: non-vlan mtu: 1500 device: qlge2
qlge3 type: non-vlan mtu: 1500 device: qlge3
aggr1 type: non-vlan mtu: 1500 aggregation: key 1
root@gp-cpu-suh004 # ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
igb0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.223.12.14 netmask ffffff00 broadcast 10.223.12.255
ether 0:21:28:f1:95:26
vsw1501001: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3
inet 10.220.128.9 netmask ffffff80 broadcast 10.220.128.127
ether 0:14:4f:fa:33:8b
root@gp-cpu-suh004 # netstat -nr
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
default 10.220.128.1 UG 1 7
10.220.128.0 10.220.128.9 U 1 5 vsw1501001
10.223.0.0 10.223.12.1 UG 1 2
10.223.12.0 10.223.12.14 U 1 1 igb0
224.0.0.0 10.220.128.9 U 1 0 vsw1501001
127.0.0.1 127.0.0.1 UH 8 261 lo0

Yes, I can connect to the vswitch interface on the control domain. I didn't specify any PVID because my understanding is that PVID will tag any frame with the PVID VLAN by default. basically the PVID for this interface is 1.
Here's the VNET config for the other LDOM in the RAC cluster:
VSW
NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
primary-vsw-mgmt 00:14:4f:f9:91:fa igb1 0 switch@0 1 1 1500 on
primary-vsw0 00:14:4f:fa:8e:cf aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
NETWORK
NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
vnet1 primary-vsw-mgmt 0 00:14:4f:fb:65:6d 1
vnetprod primary-vsw0 1 00:14:4f:fa:2b:02 1501
vnethb primary-vsw0 2 00:14:4f:f8:12:c1 10
Thanks for reviewing my configuration.

SCAN Name issue in Oracle 11gR2 RAC Installation

Hi,
I am trying to install Oracle 11gR2 RAC on VM ware and I got the INS-40922 (Invalid SCAN name). Do I need to create the SCAN name prior to the installation?
I have public,private, and VIP's. I am not sure how I create this SCAN Name. Please share your thoughts
Thanks

During installation of grid infrastructure SCAN will be automatically created. If you are using DNS then put the scan name and scan ip addresses entries in DNS . If you are not using dns/gns then put scanname and scan ipadress hosts file on each node in the cluster. Before installation, you should not be able to ping scan ipadresses.

Getting double notifications for Outlook 2013 on Windows 8.1 pro

Hi,
I have Outlook 2013 installed on windows 8.1 pro 64bit. I am having an issue with outlook notifications, I am getting 2 notifications for each mail that I receive.
I tried searching for the issue and found that I have desktop alerts enabled in Outlook settings and also windows 8 notifications for outlook in PC settings. Both these options generate their own notifications, so I get 2 notifications for each mail.
When I turned off outlook notifications in PC settings, both the notifications stopped. Then I disabled desktop alerts from outlook settings and started getting only one notification.
The issue is that both these notification look a bit different, outlook desktop alerts also show sender's photo which I prefer and I also have some outlook rules configured to show desktop alerts for only certain mails. So I want the desktop alerts to continue
and stop standard windows 8 notifications for outlook.
Does anyone know how to do that?
Thanks in advance.
SP

Hi,
As far as I know, Outlook email notifications are only shown in Window 8.1 if notifications are enabled in both Outlook and Windows.
I suspect the rules are causing this double notification issue.
You may export all the rules for backup, then start Outlook with the switch "/cleanrules":
Win key + R, type "outlook.exe /cleanrules" in the blank box, press Enter.
Check if the issue persists.
If the issue is gone after running Outlook with "/cleanrules", then let's import these rules back to check the result.
If the issue is back again, please check if any rules trigger the notification twice, use "stop processing more rules" as you need to stop the emails triggering more than one rule.
Regards,
Melon Chen
TechNet Community Support

Is VMPlayer3 supported by Oracle DB 11gR2 RAC system ?

Folks,
Hello. I have been running Oracle regular ( a single instance) Database 11gR1 successfully with Oracle Linux 5.6 as Guest OS in VMPlayer3 and with Windows 7 as Host OS for a long time.
Now, I am installing Oracle Database 11gR2 RAC system (2 nodes) in the same environment that is with Oracle Linux 5.6 as Guest OS in VMPlayer3 and with Windows 7 as Host OS.
I have installed Clusterware for 2 nodes. But it seems that VMPlayer3 is not supported by Oracle DB 11gR2 RAC system.
Only VMware Server 2.0.2 is supported. When I install VMware Server2.0.2 in Windows 7, the error message comes up as follows:
"Setup has detected that VMPlayer is already installed on this machine. Please uninstall this product through the Control Panel and try again."
This means we cannot installed VMPlayer3 and VMware Server 2.0.2 in one OS Windows 7. I have installed many VMs in VMPlayer3 and cannot uninstalled VMPlayer3.
My questions are:
Can any folk make sure whehter VMPlayer3 is supported by Oracle DB 11gR2 RAC system or not ?
If not, how to solve the issue that VMPlayer3 and VMware Server 2.0.2 cannot be installed in one OS Windows 7 ?
Thanks.

Folks,
Hello. As I know, VMPlayer 3 supports Oracle Linux 5.6 as Guest OS and Windows 7 as Host OS.
But when I am installing Clusterware and running the script root.sh, the error message comes up as follows:
"ADVM/ACFS is not supported on Oracle Linux-release-5-6-6.0.1".
My questions are:
First, what is ADVM/ACFS about ?
Second, can any folk make sure whether Oracle DB 11gR2 RAC system is compatible to run in Oracle Linux-release-5-6-6.0.1 in VMPlayer 3 with Windows 7 as Host OS ?
Thanks.

RMAN Backup restore issue

Hi Guys,
I am running 2 node RAC 11G R2 on windows. I am taking the database backup by issuing the following command:
backup database format='d:\backup\DGtest\%U_DB' include current controlfile spfile plus archivelog ;
(My source sid is "ABC" and I want to restore it into "xyz")
After taking the above backup I have to restore but I am getting the following error while restoring:
I have created the spfile and copy to ASM instance.
I have restore the controlfile into ASM.
But during database restore I am facing the follwoing issues:
RMAN> restore database;
Starting restore at 25-JUN-13
using channel ORA_DISK_1
creating datafile file number=1 name=+DATA1/abc/datafile/system.261.757702567
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 06/25/2013 09:32:04
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATA1/abc/datafile/system.261.757702567'
RMAN> restore backup;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "backup": expecting one of: "archivelog, channel, check, controlfile, database, datafil
, device, force, from, high, preview, primary, skip readonly, spfile, standby, tablespace, to restore point, until rest
re point, until, validate, ("
RMAN-01007: at line 1 column 9 file: standard input
RMAN>
Any help would be appreciated.

Is your database open? I think it should only be mounted.

11gR2 RAC install fail when running root.sh script on second node

I get the errors:
ORA-15018: diskgroup cannot be created
ORA-15072: command requires at least 2 regular failure groups, discovered only 0
ORA-15080: synchronous I/O operation to a disk failed
[main] [ 2012-04-10 16:44:12.564 EDT ] [UsmcaLogger.logException:175] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-15018: diskgroup cannot be created
ORA-15072: command requires at least 2 regular failure groups, discovered only 0
ORA-15080: synchronous I/O operation to a disk failed
I have tried the fix solutions from metalink note, but did not fix issue
11GR2 GRID INFRASTRUCTURE INSTALLATION FAILS WHEN RUNNING ROOT.SH ON NODE 2 OF RAC USING ASMLIB [ID 1059847.1

Hi,
it looks like, that your "shared device" you are using is not really shared.
The second node does "create an ASM diskgroup" and create OCR and Voting disks. If this indeed would be a shared device, he should have recognized, that your disk is shared.
So as a result your VMware configuration must be wrong, and the disk you presented as shared disk is not really shared.
Which VMWare version did you use? It will not work correctly with the workstation or player edition, since shared disks are only really working with the server version.
If you indeed using the server, could you paste your vm configurations?
Furthermore I recommend using Virtual Box. There is a nice how-to:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
Sebastian

I upgraded to iOS8.1.3, and now when I attempt to backup my iPad to iTunes for Windows, it keeps popping up an error message

H. I upgraded to iOS8.1.3, and now when I attempt to backup my iPad to iTunes for Windows, it keeps popping up an error message "not enough space on the computer". There is over 130Gb of space! I have updated iTunes, but no change. Is it an issue in the iOS update? Or am I doing something wrong?
Would appreciate your guidance...
<Subject Edited by Host>

When you upgraded, itunes should have put a copy of the itunes library database in a folder named *Previous iTunes Libraries* . If you upgraded itunes today it will show as
iTunes Library 2010-02-28.itl
Use these directions to get it back
http://support.apple.com/kb/TS1967
Since I am not sure of your setup, look for the "Previous" folder on both your C: and F: drives.

Got minus one from a read call error in ORACLE 11gr2 RAC

dear all,
im facing typical issue in my newly built RAC enviornment (11GR2 on linux 64-bit).
its a typical 2-node RAC setup. whenever application server trying to establish connection , im facing below error.
Got minus one from a read call error.
due to this , we are unable to proceed.
please share your knowlegable thoughts about this issue. i have faced this issue several times in STANDALONE systems and i have rectified it.
but in 11gr2 RAC setup i have no clue on how to resolve.
Thank you all once again

842949 wrote:
dear all,
im facing typical issue in my newly built RAC enviornment (11GR2 on linux 64-bit).
its a typical 2-node RAC setup. whenever application server trying to establish connection , im facing below error.
Got minus one from a read call error.
due to this , we are unable to proceed.
please share your knowlegable thoughts about this issue. i have faced this issue several times in STANDALONE systems and i have rectified it.
but in 11gr2 RAC setup i have no clue on how to resolve.
Thank you all once againI am sorry to see that COPY & PASTE are broken for you.
It is really, Really, REALLY difficult to fix a problem that can not be seen.
use COPY & PASTE so we can see what you do & how Oracle responds.
Handle:      842949
Status Level:      Newbie
Registered:      Mar 9, 2011
Total Posts:      7
Total Questions:      4 (4 unresolved)
so many questions & without ANY answers.
http://forums.oracle.com/forums/ann.jspa?annID=718
Edited by: sb92075 on Jun 22, 2011 9:45 PM

Oracle 11gR2 RAC with Sun clsuter 3.3 clsetup not showing ASMDiskGroup RS

Hello,
I am installing Oracle 11gR2 RAC on Solaris cluster 3.3 with hardware RAID and ASM
I was able to register rac-famework-rg and crs-framework-rg.
Oracle RAC is up and running (confirmed from crs_stat -t -v)
However, while creating option 5. Automatic Storage Management (ASM) on clsetup, I was getting ERROR: ASM is either not installed or the installation is invalid!
I have created the asm-inst-rg with resource asm-inst-rs and asm-dg-rg with resources asm-dg-fra, asm-dg-data and asm-dg-crs using CLI. Please find the complete clrg and clrs status output below:
root@rac1 # clrg status
=== Cluster Resource Groups ===
Group Name Node Name Suspended Status
rac-framework-rg rac1 No Online
rac2 No Online
asm-inst-rg rac1 No Online
rac2 No Online
asm-dg-rg rac1 No Online
rac2 No Online
root@rac1 # clrs status
=== Cluster Resources ===
Resource Name Node Name State Status Message
crs_framework-rs rac1 Online Online
rac2 Online Online
rac-udlm-rs rac1 Online Online
rac2 Online Online
rac-framework-rs rac1 Online Online
rac2 Online Online
asm-inst-rs rac1 Online Online - +ASM1 is UP and ENABLED
rac2 Online Online - +ASM2 is UP and ENABLED
asm-dg-fra rac1 Online Online - Mounted: FRA
rac2 Online Online - Mounted: FRA
asm-dg-crs rac1 Online Online - Mounted: CRS
rac2 Online Online - Mounted: CRS
asm-dg-data rac1 Online Online - Mounted: DATA
rac2 Online Online - Mounted: DATA
Once I reach clsetup option 6: Resources for Oracle Real Application Clusters Database Instances, I was able to select cluster db name, oracle home, SID for both nodes, and it listed the asm-inst-rg and asm-inst-rs for selection of "Specify Oracle ASM Instance Resource".
The problem is the the next selection which is "Specify Oracle ASM Disk Group Resources" which does NOT list any asm-dg-rg or asm-dg-fra or anything, instead, it throws error "No existing disk-group resources available for selection. Run ASM subwizard create new resource(s) and come back to this panel for the selection."
Kindly guide me to create Resources for Oracle Real Application Clusters Database Instances either in CLI or clsetup
Thanks and Regards
Ushas Symon

Solaris Cluster 3.3 u1 solved the issue.
The problem right now I am facing is IPMP on the public interface.
When I remove the cable on the bge0, the ip on bge0 and the SCAN IP's are plumbed to bge1 which is in sc_ipmp0, but NOT the virtual IP!!! and the listeners on both nodes go offiline!!!
any inputs on the configuration will be highly appreciated..
Thanks and Regards
Ushas Symon

Oracle 11gr2 RAC hardware

Hello experts,
how to install oracle 11gR2 RAC on Laptop.what are the basic requirements.
RAM 6GB
i7 processer, 500GB Hard Disk
Thanks in Advance.

Hi,
Also two more articles on the same portal with regards to 11gR2 RAC installations
[]http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-linux-using-nfs.php[]
[]http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-windows-2008-using-virtualbox.php[]
Regards,

Oracle 11gR2 RAC: how to solve "user profile creation mask failed" ?

Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I am using Cluster Verification Utility (CVU) to test the 2 nodes for Grid installation as follows:
[ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
All items for rac2 are passed. There is only one item for rac1 is not passed as follows:
Check default user profile creation mask:
Node Name: rac1
Available: 0002
Required: 0022
Comment: failed
There are 3 ways to solve this issue:
1) In the file /etc/bashrc, change the line "umask 0002" to "umask 0022".
2) In the file /etc/profile, add line "umask 0022" at the end of the file.
3) In the file /etc/csh.cshrc, change the line "umask 002" to "umask 0022".
In rac2, I got the same issue in the past. I just change the line "umask 0002" to "umask 0022" in the file /etc/bashrc and the issue is solved.
But in rac1, I have tried each of the 3 options and also combined 1) and 2), 1) and 3), 2) and 3), 1) and 2) and 3). Totally, that's 7 options. But all of 7 options cannot solve the issue.
The script runcluvfy.sh still tests rac1 user profile creation mask failed. My question is:
Do any folk understand how to solve VM rac1 user profile creation mask problem ?
Thanks.

Folks,
Hello. I follow the document "Oracle Grid Infrastructure Installation Guide 11g Release 2 (11.2) for Linux E22489-04" and do the following:
[root@rac1 /]#echo $SHELL
Output: /bin/bash
This means we need to edit Bash shell file .bash_profile.
[ora11g@rac1 ~]$vi /home/ora11g/.bash_profile
Add this line: umask 022
Then I save the file .bash_profile and reboot OS.
Then I run the following command:
[ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
But the reusult is the same. The issue is not solved as follows:
Check default user profile creation mask:
Node Name: rac1
Available: 0002
Required: 0022
Comment: failed
Do any folk understand how to solve VM rac1 user profile creation mask problem ?
Thanks.

Backup notification issue 11GR2 RAC on Windows

Similar Messages

Maybe you are looking for