Backup of CM Repository with additional properties

Hello all,
im working with EP6 NW04 SP10 portal. I'am using a Content Management Repository (fsdb) to store a large number of PDF-Files. I definied some additional properties (as predefined properties) which are maintained by the portal users for some files and folders. Is there a standard methods to make a backup of a CM Repository including the values of the additional predefined properties.
Thanks all,
Tobias.

As Prakesh says, the properties etc are sotred in the CM repository.  So in your case, the files are stored on the filesystem (wherever you have specified) and the properties and other metadat in the database.
Paul

Similar Messages

  • Additional properties tab showing empty

    Hi all,
    I'm new to Design studio.I'm facing issue with additional properties tab(already Checked from View tab) which showing empty from the time of installation of software(v1.3). When im accessing the chart which was already developed by other with data source assigned and having some properties i was unable to see the additional properties with options enabled.
    Please give ur suggestions for this issue.
    Thanks in advance,
    Rakesh.

    Hi Venu,
    Im using chart from analytical component which is default component provided by Design studio only.
    Below is the screenshot.

  • Howto work on ONE repository  with multi-user

    hi guyz, im new in using warehouse builder. i got a problem in using a single repository (with one target database and one source) which is used by multiple user to design a lot of dimensions n cubes.
    is it possible 2 do it? if yes, how? cuz my frenz and i were trying 2 design and then deployed / saved the dimensions n cubes simultaneously but it juz ended with data lost (dimensions and cubes dat already made). is there any solution 4 it???
    thx guyz...

    Firstly, you should set up an OWB user for each user if you haven't already done so rather than use a shared user id.
    Secondly, you should make one person responsible for controlling the changes to the dimensions/cubes and allocating who will make the changes, when they will be made and when they will be deployed. You need control within your project/data warehouse team, you can't expect OWB to do this part for you.
    You may also want to have separate OWB projects to split the work up a bit but this can add additional complications with e.g. process flows.
    Lastly, you may also want to consider separate projects per environment e.g. DEV, QA, LIVE.
    Si

  • Unable to unlock VI with VI properties or view block diagram.

    I have a VI that I need to modify, but I am unable to open the block diagram or unlock the VI in the VI properties dialog box (options are grayed out).  I generally have my VIs locked with no password, but I have always been able to unlock them at a later time with the properties diolog box and change anything.
    Is there a way I could have locked myself out?

    If you saved the VI without a block diagram, I believe this could happen.  If that is indeed the case, you'll need to replace the VI with your latest backup, since there's no way to retrieve the diagram once you've saved a VI without a block diagram.
    Also, make sure you're not trying to look at the diagram of a Control or Global VI...
    -D
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Can I upgrade my laptop with additional RAM and a SSD Drive.

    Hello, Well I am on the following system :-  HP Pavilion 14-v015tu Notebook PCModel #: J3Z65PA It has a 4GB RAM and I want to upgarde it with additional 4GB of memory putting it to 8GB of RAM. Also I am on Windows 10 currently the OS is quite slow on my HDD and I have been thinking to switch to SSD.I need help that can i upgrade my laptop with a 512GB SSD and if yes what size and stuff as I cant find information about the form factor,inches,size,etc of my current HDD.Also will it fit properly and stuff? Also my main concern is warranty.Does my warranty gets void if I upgrade ? Thanks 

    The backup is an issue, but you can always mail your work to your self… but the mail server has to be configured the way that mails are not deleted.
    The more elegant way is "MobileMe", you can use it as a storage and save your work there.
    Keep in mind, the iPad is limited to what you can do with the Apps, so check first if there are some Apps for the work you need to do…
    enjoy your magic machine

  • Additional Properties not available

    Hello,
    I have a problem with SAP Design Studio 1.3 SP1. Normally if you select a CHART component the ADDITIONAL PROPERTIES view appears where you can customize the CHART. But in my case the ADDITIONAL PROPERTIES view is empty there are no options available. How could this be? I hope somebody can help me.
    Best Regards
    Fabian

    Hi Fabian,
    I come across this issue often in Design Studio 1.3 SP1.
    Try this..
    - Click on the Chart component
    - Uncheck Additional properties in the View Menu
    - Now click on the chart or any other component
    - Re-check Additional properties again in the View Menu
    It might sound very silly, but this is what I do to get the issue resolved.
    Let me know if it works for you.
    Regards,
    Sruthi

  • How can I get the iBook app on my Mac to backup ePubs I created with Pages on my iPad? Only seems to want to work with purchased from the ibook store.

    How can I get the iBook app on my Mac to backup ePubs I created with Pages on my iPad? Only seems to want to work with purchased books from the ibook store. The problem is, once I create a document in Pages and turn it into an ePub to be opened in iBooks, I delete the document in Pages, because I don't need two copies taking up space on my iPad. Before Maverick, iTunes would backup everything in my iBook app on my iPad. If something ever happened to my iPad, all of my created ePubs would be lost and I would be screwed. I suppose I could keep everything on Pages and go to iCloud and download my documents to my Mac, but that is a lot of steps. I may have to do that if there is no other way, but I am hoping someone will have the answer for me. Pretty disappointed in iBooks app for Mac at this point.

    iBooks only syncs purchased books. Others must be synced in iTunes.

  • How do i restore a backup in my iphone with the newest version of iTunes

    how do i restore a backup in my iphone with the newest version of iTunes?

    Go to iTunes>Help>ITunes Help>Add items to iTunes and follow the insructions.

  • TimeMachine not backing up, as hard drive is full. Can the time machine clear old backups and replace them with new?

    Time Macine not backing up.
    As the harddrive is full, Can the time machine clear old backups, and override them with new backups. For example 5 - 6 days +++ old. Backups were proformed dayly
    Any help much appreciated
    Many thanks,

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • Customization of "Positive Pay file with additional parameters"  template

    Hi,
    We've a requirement to customize the eText template of the Positive Pay file with additional parameters report. The setup is done , now the program is picking up the new format. Since the payments involves multilines hierarchy, we are unable to print the data in the hierarchical format. Our requirement is to print a Header with information like BankAccountNumber,Total Amount in Dollars , Total number of lines. And Detail segment with all the infomation like BankNumber, BankAccount Number, Amount, Print 'V' if the check is voided etc. please let me know how to achieve this format in eText.
    Thanks
    Elan

    Did you introduce a new LEVEL for the detail info?
    Refer user guide on the syntax of usage.

  • Upload a file in KM repository with Web dynpro for abap

    Hi gurus, i´m trying to create a KM repository and then upload a file into this repository with Web dynpro for abap , but i can´t find any info. Can anyone help me with this problem, i have to solve it ASAP...
    Thanks for all....
    Regards,
    Diego.

    Please referr to the ideas on this thread.
    Install Problems withe the NW04s ABAP Trial verssion
    You have installed the loopback adapter and made the propriate entries in the hosts file, right?
    Regards,
    Rich Heilman

  • Custom component with additional tags

    Hi. I need to write complicated custom JSF component.
    I know how to write simple custom components, and receive String variables from tag attributes e.g.
    https://github.com/devalentino/temp/blob/master/src/main/java/net/monopolyclub/components/component/UserData.java
    But now I need to write custom component with additional tags (for example like dataTable and column tags).
    How can I write such component? How can I receive collections in my component? How can I work with additional tags in my component.
    for example I need something like:
    <m:chat>
         <m:tab value="#{UserList}" />
         <m:message value="#{MesageMap}" />
    </m:chat>
    where UserList - Collection with current users and MessageMap is Map with User as key and message as value.

    Iam using pt:ptdata.joincurrcommunitydata
    here is some code
    <pt:ptdata.joincurrcommunitydata pt:id="menutabsjoin" />
    <pt:logic.foreach pt:var="temp2" pt:data="menutabsjoin">
    <span class="CommunityPage">
    <pt:core.html href="$temp2.url" pt:tag="a">
    <pt:core.html pt:tag="img" src="$temp2.img" alt="$temp2.title" border="0" align="absmiddle" height="$temp2.imgheight"      width="$temp2.imgwidth" />
                        <pt:logic.value pt:value="$temp2.title" />
                             </pt:core.html>
                             </span>
                             </pt:logic.foreach>
    But the URL that is generated is not having the CommunityID, hence it errors out saying object not found.
    Any help would be appreciated?
    Thanks
    kartik

  • Will the Stitchway UltraPower 1900 mAh Backup Battery Charger work with the Apple iPhone 4S?

    Will the Stitchway UltraPower 1900 mAh Backup Battery Charger work with the Apple iPhone 4S?

    I see no reason why it shouldn't. At prices I've seen down to $4.39, I wouldn't hesitate to give it a try. That's cheaper than a sandwich!

  • Need help on creating a button with additional drop down menu

    Hi,
    I need to have a button with additional menu as we see in IE, please help me how can i do that. I want the button to be displayed normally with an additional arrow on the right side when clicked on it shows pop up menu. Please let me know if the solution has already there in the forum. I searched and couldn't get one .. :(

    Hey there buddy.
    Try this:
    http://www.koders.com/java/fid20361AB8C305DE9B9110DE90F2154FC43AA0E57C.aspx
    Jason.

  • Problems creating the Master Repository with MS SQL Server 2000

    Hello guys!
    I can't create the Master Repository with MS SQL Server 2000 database.
    Wath is the correct adress in the URL?
    I select the Driver: com.microsoft.jdbc.sqlserver.SQLServerDriver and the URL: *jdbc:microsoft:sqlserver://<host>:<port>;SelectMethod=cursor[;<property>=<value>...]*
    Thanks
    Maurício
    Edited by: user857262 on 03/10/2008 10:05

    Hi Maurício,
    For MS SQL Server the following drivers should avaliable in /drivers folder (http://www.inetsoftware.de/),
    * msutil.jar
    * mssqlserver.jar
    * msbase.jar
    JDBC Driver is:
    com.microsoft.jdbc.sqlserver.SQLServerDriver
    JDBC URL is:
    jdbc:sqlserver://serverName\instance:port;property=value[;property=value]
    Example,
    jdbc:sqlserver://myHost:1433;selectMethod=cursor;databaseName=myDB
    Thanks,
    G

Maybe you are looking for