Backup of monitor node 1.1.4

Hi all,
I'm fairly happy with backups and restoration on the admin node, but not done much with the monitor node.
I think a while ago, I backed up a monitor node and restored it, and seemed to go ok, apart from the gap in logs while you're actually doing the backup/restore.
What I want to know and have not seen any documentation on it, is there a decent way of opening and viewing backed up logs. i.e. accessing the massive raw encrypted file that will be saved off to some network drive somewhere?
I'll give it a try on Monday but not got access to any at the moment.
Sent from Cisco Technical Support iPhone App

Hi,
For scheduled backups, you can obtain information about the backup, backup events, and status (when the backup was performed, whether it was successful or not, and so on) from the Backup History page.
Every Cisco ISE administrator account is assigned one or more administrative roles. To perform the operations described in the following procedure, you must have one of the following roles assigned. Super Admin or Monitoring Admin or Helpdesk Admin.
To view the backup history, complete the following steps:
Step 1 Choose Operations > Reports > System.
Step 2 From the System navigation pane on the left, choose Data Management > Administration Node > Backup History.
The Backup History page provides basic information about the scheduled backups that were run.
For failed backups, you must run the backup-logs command from the Cisco ISE CLI and look at the
ADE.log for more information.
Note The backup history is stored along with the Cisco ADE operating system configuration data. After an application upgrade, backup history is not lost and the Backup History page lists all the backups that were run. The backup history will be removed only when you reimage the primary administration node.

Similar Messages

  • Cisco ISE Monitoring node backup size

    Hello All,
    We have a HA pair of ISE servers that have scheduled backups configured for the Admin persona (currently full weekly backup) and monitoring which is full weekly but with the addtional incremental daily backups. I've not seen any issue with the full weekly backup of the admin node however the monitor one provides unusual results in terms of file size between weekly and incremental backups.
    Given the fact that we are currently piloting this with very little radius activity i'm curious as to how the daily backups can be bigger in filesize than the weekly?
    The ISE is a ISE-3315-K9 running 1.1.3.124 and below are some examples
    -rw-r--r-- 1 tsmbackup tsmbackup 502960384 Apr 21 07:08 mntincr_1_<removed>.tar.gpg (Incremental backup)
    -rw-r--r-- 1 tsmbackup tsmbackup 459348307 Apr 21 01:04 mntdbfull_<removed>.tar.gpg (Full backup)
    Thanks in advance for any suggestions.
    M

    Hi,
    This could possibly due to ‘Data Purging’. When a purge operation triggers, if the actual used database disk space is greater than the configured threshold, the purge operation removes all data from the Monitoring database tables prior to the data retention window.
    Following link might help in your case,
    http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_mnt.html#wp1074687

  • OS/DB migration : Distribution Monitor nodes

    Hi All,
    We are in the process of migrating our ECC 6.0 environmnet from Solaris + DB2  to  AIX +DB2.
    We are using Linix Application server as our Distribution Monitor nodes.  In this run we did not get the result as per our expectation. Could please share your experinece or recomendation to use third OS (in our case Linux) for Distribution Monitor Node. Is there any recomendation or best practice for Distribution Monitor nodes -- whether we should use same OS as Source system or Traget  OS or we can use any Application Server ( OS).
    Regards,
    Dipam Phukan

    Best Approach  migrate your ecc 6.0  from solarisDB2 to AIXDB2
    if you use migmon or Distubution method  its take time .  For DB2  migration we can go backup/restore method.
    If you are system running on DB2 .  you can move any unix to any unix with out using migtaion tools . you can use only backup restore mehtod.
    You can use redirected restore to create a Heterogeneous system copy between 2 systems running on different platforms.
    sapnote:628156
    document:
    A:http://www.ibm.com/developerworks/data/library/techarticle/0308nesiem/0308nesiem.html
    B:http://publib.boulder.ibm.com/infocenter/db2luw/v9r5/index.jsp?topic=/com.ibm.db2.luw.admin.ha.doc/doc/c0005960.html
    Compare to orace , DB2 lot of benefits . if  same case required to move with oracle mean you need  to migration  but DB2 you can backup restore method.
    Procedure:
    1. use Redirect resore mehtod
    2. source system preparation .
    run redirect restoer script  in source sytem
    3. Target system preparation
    install  fresh system  and resore the database from backup using redirect restore
    With Regards
    Ram
    solution Architect for Migrations,upgrades, SAP HAHA

  • ISE admin , PSN and monitoring node fail-over and fall back scenario

    Hi Experts,
    I have question about ISE failover .
    I have two ISE appliaces in two different location . I am trying to understand the fail-over scenario and fall-back scenario
    I have gone through document as well however still not clear.
    my Primary ISE server would have primary admin role , primary monitoring node and secondary ISE would have secondary admin and secondary monitoring role .
    In case of primary ISE appliance failure , I will have to login into secondary ISE node and make admin role as primary but how about if primary ISE comes back ? what would be scenario ?
    during the primary failure will there any impact with users for authentication ? as far as PSN is available from secondary , it should work ...right ?
    and what is the actual method to promote the secondary ISE admin node to primary ? do i have to even manually make monitoring node role changes ?
    will i have to reboot the secondary ISE after promoting admin role to primary  ?

    We have the same set up across an OTV link and have tested this scenario out multiple times. You don't have to do anything if communication is broken between the prim and secondary nodes. The secondary will automatically start authenticating devices that it is in contact with. If you promote the secondary to primary after the link is broke it will assume the primary role when the link is restored and force the former primary nodes to secondary.

  • How to Create Interface specific Monitoring Node in RZ20

    Is it possible to create Interface/namepsace specific Monitoring node in CCMS RZ20. If yes, then how??? I need to have this node in ECC system.
    Thanks and Regards,
    Pallavi Singh

    Hi,
    It is possible to achieve this using the MTE class SXMB - this will allow thr highlight of errors within the local IE.
    Is this what you need ??
    Kind regards
    Colin.

  • Visual Admin - Dispatcher - Monitoring Node issue

    Hi all,
    On a PI 7.0 SP13,
    In visual admin, the monitoring node of the dispatcher section doesn't start fully :
    Only both tabs "Properties" and "Additional Infos" are available.
    When we try to start the Monitoring service manually, we got the following error message :
    Start service Monitoring
    java.rmi.RemoteException: Could not start service monitor on cluster ID 4226000; nested exception is:
         com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Service monitor error. Nested exception is: java.lang.NoClassDefFoundError: com/sap/mona/api/MonitoringNode
         at com.sap.engine.services.monitor.common.MonitorServiceRuntime.installCcmsConnector(MonitorServiceRuntime.java:662)
         at com.sap.engine.services.monitor.dispatcher.MonitorDispatcherFrame.start(MonitorDispatcherFrame.java:53)
         at com.sap.engine.frame.CommunicationFrameAdaptor.start(CommunicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
         at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
    ', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key Service monitor error. Nested exception is: java.lang.NoClassDefFoundError: com/sap/mona/api/MonitoringNode
         at com.sap.engine.services.monitor.common.MonitorServiceRuntime.installCcmsConnector(MonitorServiceRuntime.java:662)
         at com.sap.engine.services.monitor.dispatcher.MonitorDispatcherFrame.start(MonitorDispatcherFrame.java:53)
         at com.sap.engine.frame.CommunicationFrameAdaptor.start(CommunicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
         at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
    Do you have an idea to solve this issue.
    Thanks a lot in advance
    Edited by: Jean-Charles on Feb 14, 2008 5:02 PM

    It is correct one
    sorry
    The monitoring service is red cross marked as it is not started. when we do rigth click and start we have the message quoted above...

  • Enterprise Manager is not configured to monitor node rac2

    Hi
    DB=11.2.0.2
    i installed my database on RAC with 2nodes.all of the things is ok:
    $ emca -displayconfig dbcontrol -cluster
    **************** Current Configuration ****************
    INSTANCE NODE DBCONTROL_UPLOAD_HOST
    orcl rac1 rac1.irisad.net
    orcl rac2 rac1.irisad.net
    and i execute command $ emca -reconfig dbcontrol -cluster -EM_NODE rac1 -EM_SID_LIST orcl1,orcl2
    but Enterprise Manager is not configured to monitor node rac2 and i see only rac1!!!
    what i must to do???pls help.

    open dbconsole and see if both instance are coming in monitoring tab or not.
    http://docs.oracle.com/cd/E11882_01/server.112/e10595/dbcontrol002.htm

  • Deleting a monitoring Node in Cronacle

    Hi All,
    We need some help.
    We need to delete a monitoring tree (XAL - SAP Tecnical Expert Monitors - All monitoring context) in Redwood for a requirement.
    We had used the script RW_DELETE_MONITOR in Cronacle 6 for the same but in Cronacle 7.0.3 we see that this particular script is not available. I can see 2 similar script for our purpose, RW_DELETE_CONDITION_NODES & RW_DELETE_VALUE_NODES, but we are not able to find any help on these 2 scripts.
    Can you please let me know why and when to use these 2 scripts? Are these the right scripts to use for our requirements.
    Thanks in advance for your help.
    Warm Regards
    Rajeet

    Hi Rajeet,
    The scripts you mention will only delete values and conditions ie. subitems of monitoring nodes.
    You can use the jcs_mon.drop_monitor call to drop a monitor (tree).
    Note that this requires a monitor ID as input, so you may want to use jcs_mon.path_to_id to get the ID of the monitor you want to drop.
    Something like:
    begin
       jcs_mon.drop_monitor ( monitor_id =>  jcs_mon.path_to_id ( '/RW_SAP/SID/MyMonitor' )
                            , recursive  => 'Y'
    end;
    Regards,
    Anton.

  • RZ20, No value for Performance/Backup and Restore node

    Hi Experts
    In RZ20 - CCMS monitoring there was no MTE for the database. i executed the report RSMON0, which created the node Microsoft SQL server monitor. But not all the nodes have the data.
    Space Management has the data but _Performance , Backup/Restore and Health have no data collected.
    I have already implemented the note 1141047 but no data collected.
    system details
    SP 15
    Kernel support pack level 159
    database MSSQL 9.00.4035
    Please help me
    regards
    Naveen

    What error?
    FYI: No iTunes content is included in any iPhone backup. After you restore from backup, you must sync to restore your iTunes content.

  • Who tacke backup in another node using rman

    hello,
    i want to tacke backup of swap database in another node please any one can help me.
    thanks
    NIL

    Hi,
    Please see your other thread.
    Want to rman duplicate the database
    Want to rman duplicate the database
    Thanks,
    Hussein

  • Application monitor node display off

    Hi All,
    I am using SRM 4.0. Strangely I am running into lot of troubles in SRM since yesterday as there was a mess up in the batch jobs.
    Now, we are having an issue with Application monitor. It is not showing any error message in ITS, but I could see some error messages in RZ20. In ITS, when I click on "Display all" under purcashe order or confirmations in application monitor, it used to show the errors or it will say no error. But now it is showing GUI - RZ20 screen with a message "Node Display off".
    I have tried by restarting the Application monitor, but it didn;t help.
    Could you please help me to fix this?
    Thanks,
    Arun

    Hi,
    Please refer to the following SAP OSS notes ->
    Note 135503 CCMS monitor arch: meaning of profile parameters
    Note 781100 CCMS: Too many nodes/too little memory during KMC monitoring
    Note 623164 CCMS: Error if alert/MONI_SEGM_SIZE=0
    Note 731165 RZ20: CCMS parameters for segment control
    Note 110368 FAQ - CCMS MONITORING INFRASTRUCTURE
    Note 509524 RZ20: Methods do not start
    Note 382769 RZ20: Error messages do not generate any Alerts
    Note 705569 BPMon: Important Msg's in Activation and Generation Protocol
    Note 807072 DataSources for ABAP and distributed statistics data
    Note 746193 RZ20: Generating all-clears ("green alerts")
    Note 783725 EP6.0 CM & Collaboration SP2 Patch 27
    Note 441768 - Displaying canceled shopping carts in monitor 3.0 and 3.5
    Note 395699 - Display shopping baskets with status 7 in the Monitor

  • Failed system state backup on Passive Node

    I have a Windows Server 2012 R2 cluster that has a service that is installed on shared storage.  On the passive node, the system state backups are failing because the path to the service executable does not exist.    KB980794 existed
    for Server 2008, which contained a hotfix and a registry key that could be added to exclude the paths to binaries that should not be included in the system state backup. 
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SystemWriter\ExcludedBinaryPaths
    Is there a similar method of excluding these paths in Windows Server 2012 that will allow the VSS snapshot to execute successfully?

    Hi,
    Thanks for your posting.
    I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
    Thank you for your understanding and support. 
    Best Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Are we suppose to see LUNs in the Backup software ? | node-scope is disabled

    Hi, If anyone can confirm this to me ?
    Are we supposet to see LUNS in the backup software for Cluster Mode 8.3RC1 ? I have disabled 'node-sope' and added cluster using cluster mgmt LIF, I am able to see 'all' the volumes under SVMS, but cannot see LUNS. Is this normal ? Thanks,-Ashwin

    Hi Deepu, Thanks for attending this query. Actually, the article is about the resources [volumes/Tape Drives] with respect to NDMP Node-scope vs vserver. This does not tell help in selecting the LUNs. In the Backup windows when I click 'Content' tab to includes the resources - Only volumes are exported with SVM names.  I found the workaround by manually adding the LUN to the volume. Example - /svm/volumename  Manually add the LUN by placing '/' , example - /svm/volumename/lunname ---- This works. Thanks,-Ashwin

  • Rman backup at which node

    which should be primary node or satandby node for rman backup

    afzal wrote:
    thanks
    i want to take weekly full backup and daily incremental cumulative backup
    i want to keep one week backupYou can delete the 1 week older files by:
    find /rman_backup_folder/ -type f -mtime +7 -exec rm -f {} \;So all you need is to take your backups into this folder, and then run the above code weekly (after you take a new full backup). You can use the following configuration to take your backups into a specific directory:
    CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/rman_backup_folder/RMAN_%t.%p.BAK'You can examine the backup scripts here: RMAN Scripts
    You shouldn't use rman commands such as "delete obsolete" because retention policy will probably do not work for you.
    On the other hand, I will suggest you to use a rman catalog to manage your incremental backups, so you can also easily set the retention policy.
    Regards
    Gokhan

  • Broken video card/hard drive backup/no monitor

    I have a broken video card.  How do I back up the harddrive if my screen is unreadable?

    Do you have access to another Mac? If so, you might be able to use FireWire Target Disk Mode to mount your hard drive on the other Mac:
    http://support.apple.com/kb/HT1661
    You won't be able to see the FireWire  symbol on the Mac with the non-working video, but you should be able to see the drive mount on the desktop of the other Mac. Once it's there, you will be able to access its contents and do your backup.
    Also, check to see if your Mac falls under this program:
    http://support.apple.com/kb/TS2377
    If it does, the repair will be done at no cost to you.
    Good luck!

Maybe you are looking for