Backup Or Export file is not created by using OEM

Hi All,
I'm facing a typical problem. When i will export/backup some table/database/tablespace by using ORACLE ENTERPRICE MANAGER ,export/backup is shown on job pain in OEM but the physical file will not exist on the showing path by OEM.
My Database version is 9.2.0.1 & it's running on Win XP2.
Please help me.
Regards
Subhradip

It has been a long time that I have seen 9i on windows, but if recall that right, you must additionally give the OS user the right "logon as batch job".

Similar Messages

I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?

I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?
Windows 7 64
PC

everything works on a laptop (

Backups of the JVM.CONFIG file are not created

Backups of the JVM.CONFIG file are not created.
CF10 > Server Settings > Java and JVM in part says:
Backups of the jvm.config file are created when you hit the submit button. You can use this backup to restore from a critical change.
CF10 Help page indicates jvm.bak will be created:
http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf3638e6-7ff c.html#WSc3ff6d0ea77859461172e0811cbf3638e6-7feb
Note Help indicates incorrectly JVM.CONFIG and BAK are in cf_root\runtime\bin where as JVM.CONFIG is located cf_root\instance\bin .
Thanks in advance, Carl.

I must have not had enough coffee - JVM.BAK is created in where JVM.CONFIG is found. Pardon me.

RW-00023: Error: DBC file was not created- When try to install 11i on OEL5

I got an erorr in the appl-top log file as below, also my installation wizard showing post installation checks did not succeed. Please advice.....:-)
DBC File Check
RW-00023: Error: - DBC file was not created:
File = /d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
HTTP Check
checking URL = http://oracleapp1.srini.co.uk:8000
RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
PHP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
PHP Check
checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

Hi JD,
I am able to fix this issue.....:-) Thanks for your help JD.
As per the Metalink note 747424.1, i replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL only in DB-tier, but not in the Apps tier. So this was causing the
above issue in the instalation of oracle 11i on OEL5
--Once again i alter and replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL in both the files....
(db tier)
<DB_HOME>/appsutil/bin/adgetlnxver.sh (did it earlier)
(apps tier)
<APPL_TOP>/ad/11.5.0/bin/adgetlnxver.sh
--run the autoconfig in apps tier with completed successfully result (and also generated the DBC files)
--run the adstrtal.sh and retry the rapidwiz once more. ( Oracle Discoverer services VIS_oracleapp1 - addisctl.sh - this one is Failed)
--This time everything checked OK in the instalation wizard.

PDF file is not created properly when I choose File- Print...- PDF-- Save as PDF

PDF file is not created properly when I choose File->Print...In dialogue box if i select option Save as PDF under PDF button...But it works fine with Safari Browser..
== This happened ==
Every time Firefox opened
== always

My first thought is to make sure the fonts used are common. If there is a substitution, things will be off.

Mod_jk.conf file is NOT created

Hi Experts,
I am using Apache(2.0.40), JBOSS(3.0.3) and Tomcat(4.0.4) on IBM AIX 5.1 System.
After spending 1 week on Integrating Apache and Tomcat on IBM AIX System (and getting HELP from you guys from Mailing List), I finally builded "mod_jk.so" file for this platform.
I also configured Tomcat's "server.xml" and "workers.properties" file BUT when I start my JBOSS engine, "mod_jk.conf" file is NOT created automatically. I refereed the following document to configure that:
http://jakarta.apache.org/tomcat/tomcat-3.3-doc/mod_jk-howto.html
Do you experts have any suggestion/information as to why "mod_jk.conf" file is not created automatically? The above document says the file is CREATED AUTOMATICALLY once you start Tomcat!
Any related information on this would be appreciated.
THANKS!
Manoj G. Kithany
[email protected]

thanks, I have since figured this one out...
What I cant seem to do is get Apache to use Tomcat to serve any jsp's.
I have spent the last three days working with this and have gotten no where. I am rather frazzled and am about to abandon the thought of using anything Java for a long time.
Let me spell out what I have done for you:
#========================================================
C:\Java\Apache\Tomcat_4.1\conf\auto\mod_jk.conf
#========================================================
########## Auto generated on Fri Sep 13 18:46:55 EDT 2002##########
<VirtualHost localhost>
    ServerName localhost
    JkMount /manager ajp13
    JkMount /manager/* ajp13
    JkMount /examples ajp13
    JkMount /examples/* ajp13
    JkMount /tomcat-docs ajp13
    JkMount /tomcat-docs/* ajp13
    JkMount /webdav ajp13
    JkMount /webdav/* ajp13
    JkMount /admin ajp13
    JkMount /admin/* ajp13
</VirtualHost>#========================================================
C:\Java\Apache\Tomcat_4.1\conf\jk\workers.properties
#========================================================
# Start setup file
#==========================================================
workers.tomcat_home=C:/Java/Apache/Tomcat_4.1
workers.java_home=C:/Java/j2sdk1.4.0
ps=/
worker.list=MyWorker
#==========================================================
# Definition for MyWorker worker
#==========================================================
worker.MyWorker.port=8009
worker.MyWorker.host=192.168.0.2
worker.MyWorker.type=ajp13
worker.MyWorker.class_path=C:/Java/Apache/Tomcat_4.1/bin
worker.MyWorker.class_path=C:/Java/Apache/Tomcat_4.1/common/lib
worker.MyWorker.class_path=C:/Java/Apache/Tomcat_4.1/server/lib
worker.MyWorker.class_path=C:/Java/j2sdk1.4.0/lib/tools.jar
#==========================================================
# End setup file#==========================================================
C:\Java\Apache\Apache2\conf\httpd.conf
#==========================================================
about line# 212:
ServerName 192.168.0.2 # my internal ipat bottom of file:
LoadModule jk_module "C:/Java/Apache/Tomcat_4.1/module/mod_jk.dll"
Include C:/Java/Apache/Tomcat_4.1/conf/auto/mod_jk.conf
JkWorkersFile "C:/Java/Apache/Tomcat_4.1/conf/jk/workers.properties"
JkLogFile "C:/Java/Apache/Tomcat_4.1/logs/mod_jk.log"
JkLogLevel emerg
JkLogStampFormat "[%a %b %d %H:%M:%S %Y] "
JkMount /examples/*.jsp MyWorker
JkMount /examples/jsp/* MyWorkerWhen I put this URL in my browser:
http://192.168.0.2/examples/jsp/
I get a 404 error...
Apache keeps trying to serve the *.jsp's and it fails every time it trys to do so. I know this b/c the Tomcat logs are virtually empty while the Apache logs keep being added to like so:
192.168.0.2 - - [14/Sep/2002:19:04:57 - 0400] "GET /examples/jsp/snp/snoop.jsp HTTP/1.1" 404 294
Can anybody help me figure out how to configure Tomcat4.1 with Apache 2.0?

Log file is not created used util.logger

I need to write a log into a file using java.util.logging.
File name should read from properties file.
Issue is file is not created in D:\TestLogging.log
Below are the configuration:
src\resources\logger.properties
handlers=java.util.logging.FileHandler, java.util.logging.ConsoleHandler
.level=INFO
java.util.logging.ConsoleHandler.level=SEVERE
java.util.logging.ConsoleHandler.formatter=java.util.logging.SimpleFormatter
java.util.logging.FileHandler.level=ALL
java.util.logging.FileHandler.pattern=D:\TestLogging.log
# Number of output files to cycle through, by appending an
# integer to the base file name:
java.util.logging.FileHandler.count=1
# Style of output (Simple or XML):
java.util.logging.FileHandler.formatter=java.util.logging.SimpleFormatter
SimpleLogger.java
import java.util.logging.*;
public final class SimpleLogger {
public static void main(String argv[]) {
SimpleLogger thing = new SimpleLogger();
thing.doSomething();
public void doSomething() {
fLogger.finest("this is finest");
fLogger.finer("this is finer");
fLogger.fine("this is fine");
fLogger.config("this is config");
fLogger.info("this is info");
fLogger.warning("this is a warning");
fLogger.severe("this is severe");
fLogger.logp(Level.INFO, this.getClass().toString(), "doSomething", "blah");
Throwable ex = new IllegalArgumentException("Some exception text");
fLogger.log(Level.SEVERE, "Some message", ex);
fLogger.exiting(this.getClass().toString(), "doSomething");
private static final Logger fLogger =
Logger.getLogger(SimpleLogger.class.getName());
Could you please help, any configuration is missed

Malar,
Check for the file in the server folder of your server installed directory.
ie..<Drive where server installed>:\usr\sap\<name>\<instance>\j2ee\<server node>
Regards
Abu Bakar

Export file is not a valid HTMLDB export file

Hi All,
I have a serious problem today when i want to import the exported application file to another workspace in other machine.Both workspace have same name & same schema in which application resides.I got the messages "export file is not a valid HTMLDB export file" .I have search thru the forum and have got several possibly solution.But i want to know what should be done to successfully build the application.Even after exporting file from different workspace and diff name from diff machine still i got the same error message.
Any Ideas ?
Thanks in advance ,
Cheers,
Eman

I export an application resides in workspace HTMLDB_W in APP_OWN schema in database A version 9.2.0.1 and import that application to HTMLDB_W1 in APP_OWN schema
in database B version 9.2.0.5.Both database have HTMLDB version 1.6.1.02.when importing file the files are successfully imported but after click on Install the "Application Install"
region appears.Here the information shows below.....
Logged Into Workspace: HTMLDB_W1
Export File WorkspaceID:
Export File Application:
Export File Version:
Export File Parse As Schema:
Application Origin: This application was exported from another workspace.
Parse As Schema :APP_OWN
i select Run & build application then reuse my application ID .
There is no other application in the same schema & workspace of same application ID.Also when export the file the Character set is Unicode -UTF & while importing i choose the same character set in DOS format.I change the options later but nothing helps me......
I think since the export file version & workspace id cant detectable so the application fails with following error message ::
1 error has occurred
File is not a valid HTML DB application export file.
Previously i use the same workspace later i changed the workspace so now the export & import workspace is different & import workspace ID: 658006861199719
export file workspace ID : 689311213291671
If need more information please revert back to me.
Regards,
Eman

Jar file: log file is not created!

Hi, I create a log file with these instructions:
//logger
          FileHandler fh = new FileHandler(LOG_FILE,true); //append mode
          fh.setFormatter(new SimpleFormatter());
          logger = Logger.getLogger(this.getClass().getName());
          logger.addHandler(fh);It works well as long I execute it normally, but when I create a .jar file and put this logger class inside logger file is not created..how come?

Hi, I create a log file with these instructions:The code extract creates a Logger object, sure, but does that mean it creates a log file? The log file creation could be deferred until the first usage of the logger...
It works well as long I execute it normally,Let's clarify: do you mean, when executing from your IDE, or when executing via a command line?
but when I create a .jar file and put this logger class inside logger file is not created..how come?Let's clarify: do you mean, when you execute the same code packaged in a jar file?
The most likely issue is configuration: apparently the various ways in which you run your program use different logging configurations.
J.

Log file is not created using LOG4J

Hi all,
I want to use Log4j to log the details about my portal application. I would prefer using Log4j instead of SAP Logging. I have created properties file in my portal application which extends Abstract Portal Component. This my Log4j.properties file which i created under dist\PORTAL-INF\classses folder. I could read the Properties file. There is no problem on that. I am able to refer the API s available in Log4j. I am using Log4j-1[1].2.14.jar.
log4j.rootLogger = INFO, R1
log4j.appender.R1 = org.apache.log4j.RollingFileAppender
log4j.appender.R1.File = LoggerForMyApplicationC.log
log4j.appender.R1.MaxFileSize=100KB
log4j.appender.R1.MaxBackupIndex=1
log4j.appender.R1.layout=org.apache.log4j.PatternLayout
log4j.appender.R1.layout.ConversionPattern=[%-5p] [%d] [%c] - [%m]%n
But the problem is Log file is not created (LoggerForMyApplicationC.log) under \logs foler in SAP J2EE Server.
Do i miss any other configuration? Please bring me the solution.
Thanks,
Malar

Malar,
Check for the file in the server folder of your server installed directory.
ie..<Drive where server installed>:\usr\sap\<name>\<instance>\j2ee\<server node>
Regards
Abu Bakar

File to file secnario output file is not created.

Hi,
while creating the file to file secnario, file is picked by xi server and shown to sxmb_moni but output file is not created.
Please help.

HI
Go to RWB->Message Monitoring->Message Display Tool(MDT)->Audit Log and check the status..
Go to SMQ2 and check is there any queue is pending in the Queue..
If so try to activate it. For this you can refer this blog-
XI : How to Re-Process failed XI Messages Automatically
If not-then check the configuration again-
1) Check the Receiver Communication channel for the FTP URL/File creation mode etc
2) Are you able to see the mapped data in SXMB_MONI..
3) Reciever Agreement/Reciever Determiation/Interface Determination
Check if you have given a Write Access to the folder in which the file is to be placed
Thanks
Gaurav

What are the .fm.sp files that are created when using SharePoint?

What are the .fm.sp files that are created when using SharePoint? When I'm working with SharePoint, I've noticed that duplicate files ending in .fm.sp are created. I've been unable to find any reference or documentation about them so far.

Whe you use sharepoint as a CMS connections in Framemaker it creates the folder where Sp is installed and also a file ending .sp is created that let SP know that its the file associated with it.
.fm.sp indicates that its the framemaker type SP file.
Dont worry about it as its not creating any mess in the system.
Harpreet

I misplaced my ipad, so I remotely erased it. Then I found it, but now I cannot use all of the options in the settings. I have restored from backup, but it still is not letting me use all functionality. Help!

I misplaced my ipad, so I remotely erased it. Then I found it, but now I cannot use all of the options in the settings. I have restored from backup, but it still is not letting me use all functionality. Help!

Would throwing it in Recovery mode and restoring as new clear it up?
(same for Ipad)
Step 1: Turn off the iPhone. To do this press and hold the power button till you see the “Slide to Power off” screen. Now slide the button to turn it off.
In case your iPhone is stuck in an infinite loop and the previous option is unavailable, press and hold the Power and Home button till the screen goes off. Remember to leave both the buttons as soon as the screen goes off and before the Apple logo appears again.
Step 2: Connect the iPhone’s USB cable to your computer but not to your iPhone yet.
Step 3: Now hold down the Home button and while you are holding it connect the USB cable. Keep holding the Home button till you see the Connect to iTunes screen on your iPhone(Screenshot shown below). iTunes will show an alert saying a device in recovery mode has been detected.
Here’s what your iPhone screen will look like once its in the iPhone Recovery Mode.
Read more: http://www.callingallgeeks.org/15018/how-to-put-iphone-or-ipod-touch-into-recove ry-mode/#ixzz296y04ygX
Under Creative Commons License: Attribution No Derivatives
THEN RESTORE THE DEVICE AND SETUP AS NEW. JUST YOU WILL HAVE TO DOWNLOAD YOUR APPS AGAIN(FREE) ETC....
LEAST THE SECURITY WORKS HAHA!!! I also wouldnt get upset, be thankful you found it.

Export command does not create output file (PDF/WORD etc format) file

I am using Crystal Report 8.5 and studio .net 2002. I have crystal report 8.5 as well as Crystal report XI
installed on machine.
I have used Crystal Report Engine 9.1.3300 as reference in asp.net application.
Some of the crystal reports get exported to file (PDF/WORD etc) properly in the virtual directory.
However, for some reports export file (any format) PDF file does not get created.
Please help urgently.
regards,
Anita

Anita please download Service Pack 1 for CR 9.1 and see if that resolves the issue. SP 1 is here:
https://smpdl.sap-ag.de/~sapidp/012002523100009301312009E/crnet11win_en.zip
Ludek

Video Sidecar Files (.THM) Not Created When Video Exported As Original - They should be.

When exporting video as in it's original format the .THM sidecar file (which contains all the relavent metadata for the video) should be included so that other programs (or even Lightroom itself if using the Add to This Catalog option during export) can have access to the metadata for the video.
Here is my use case:
After importing the original video clips I would like to do the following to keep my footage clean and conserve space (as we all know HD video eats a LOT of space)
1. Trim excess / unneeded footage from the clip
2. Export the clip in it's original format with a new name (such as MVI_1234_trimmed.mov) and have it added back to the catalog during the export process.
3. Delete the original clip containing the unneeded footage.
This workflow is almost perfect in the initial LR 4 beta release except that a copy of the .THM file is not included when the video is exported. This means the new clip will not contain any metadata when added to LR or presumabley other applications. I can manuall get around this by duplicating the original .THM file and renaming the duplicate to match the name of the new trimmed clip (example MVI_1234_trimmed.THM) then manually importing into Lightroom. However this breaks the almost perfect workflow and increases time and room for error. It would no longer be an automated process which could easily be applied to clips in bulk.
Please have LR create the sidecar file with when exporting in original format or at least have an option for it!

The proposed workflow may not be valid based on the discussion here: http://forums.adobe.com/thread/947245?tstart=0 but the sidecar file point still is. Exporting as H.264 does not preserve metadata either. LR shows no camera / exposure / date time information for the H.264 version.

Backup Or Export file is not created by using OEM

Similar Messages

Maybe you are looking for