Backup phone mem. and restore

I formatted the phone( green+*+3), and tried to restore from backup, but only after a while "App closed. !InstallServer" message appears then "Phone will restart", and the phone restarted, but the backup was not restored at all. (I use N71)

I have read similar issues here : /discussions/board?board.id=smartphones perhaps you can find the answer there ?

Similar Messages

  • HT1212 I'm trying to backup my iPhone and restore it because the screen has gone black.  It won't allow me to do anything without putting in the passcode.  I can't put in the passcode because the screen is black.

    I'm trying to backup my iphone and restore it because the screen has gone black.  It won't allow me to do anything without putting in the passcode.  I can't put in the passcode because the screen is black.

    Try rebooting it (hold home and power together for 15-20 seconds). If the display doesn't come back to life, you're out of luck. You're supposed to back it up before it fails. It's too late to do so after the fact.

  • Can I maintain Elements Tags and Stacking if I backup on Windows and restore on Mac

    Can I maintain Elements Tags and Stacking if I backup on Windows and restore on Mac

    Thanks Barbara and Michel, confirming that backup on from Elements 10 on Windows 7 and restore to Mac OSX albeit slow worked fine preserving stacks and tags.
    Previous experience of upgrading Elements 5 to 10 on Windows lost all stacks which put me in the dog house with my wife who had spent a lot of time creating them.
    All the best John

  • Backup contacts & messages and restore on new iphone with another computer

    Dear,
    My brother gifted me iphone-4 which was in his use, he has no music, videos even not much photos. But he has much contacts and messages also messages on viber.
    I made backup by iTune and also copied the backup folder from mobilesync from my computer. the backup is just only about 256MB.
    If i email him this backup folder or give on flash drive, Can he restore on his new iphone-4 or iphone-5 ?
    please advice me in this regard that the itune backup include contacts & messages and can be restored on new mobile with another computer.
    Thanks.

    Hey shoaibadil,
    Thanks for the question, and congratulations on the iPhone gift.
    It sounds like you are doing everything correct, however I suggest that you backup your iPhone, and restore his iPhone with the backup at the same time (instead of emailing). The backup file is probably too big to email to your brother. You could also use iCloud to accomplish this:
    Transfer content from an iPhone, iPad, or iPod touch to a new device
    http://support.apple.com/kb/HT2109
    Thanks,
    Matt M.

  • Flashing question mark on screen. Can I still backup my files and restore my system?

    Okay, so yesterday evening, I received a message from my teacher that I had to redo one of my papers because a program she used detected some copy paste information that was about 39% more than what she accepts and asked me to reword some of the information. When I started working on my paper to resubmit it to her, My laptop was freezing a lot in the middle of me working on my school paper. After a while, it completely froze to the point where I could no longer do anything and stayed frozen for hours on end. I couldn't even save my work which was very frustrating considering I wanted to get that done and out of the way. I felt that I had no choice but to force it to turn off and turn it back on. In the process of me doing so, a flashing file with a question mark came on in which I took the time to look up to see what it meant and how can I fix it. However, after many reading, I realized that if I reboot the system I will lose everything I have that's important to me (which technically is my school work, some photos, and licensing application). I never used the Time Machine when my laptop was up and running because I never understood it or knew how to use it. One of the things I read is that I am able to restore my laptop with Time Machine. But I was curious to know if I can still use Time Machine to backup and restore my laptop? I'm hoping I can as I really do not want to lose the information and files I have saved. Below are the basic information of my laptop. Please help!!!!
    Screen Size
    13.3 inches
    Screen Resolution
    1280x800
    Max Screen Resolution
    1280x800 pixels
    Processor
    2.5 GHz Intel Core i5
    RAM
    4 GB DDR3
    Hard Drive
    500 GB HDD 5400 rpm
    Graphics Coprocessor
    Intel HD Graphics 4000
    Chipset Brand
    Intel
    Card Description
    Intel HD 4000
    Graphics Card Ram Size
    128 MB
    Wireless Type
    802.11 a/b/g/n
    Number of USB 2.0 Ports
    2
    Average Battery Life (in hours)
    8 hours
    Expand 
    Other Technical Details
    Brand Name
    Apple
    Series
    MacBook Pro
    Item model number
    MD101LL/A
    Hardware Platform
    Mac
    Operating System
    Mac OS X 10.8 Mountain Lion
    Item Weight
    4.5 pounds
    Item Dimensions L x W x H
    8.94 x 12.78 x 0.95 inches
    Color
    Silver
    Processor Brand
    Intel
    Processor Count
    1
    Computer Memory Type
    DDR3 SDRAM
    Hard Drive Interface
    Serial ATA
    Hard Drive Rotational Speed
    5400 RPM
    Optical Drive Type
    DVD+R DL
    Audio-out Ports (#)
    1
    Power Source
    DC
    Voltage
    100 volts

    The fact that you can boot into Recovery Mode, which is a hidden partition on your HD, means your HD is working, at least somewhat. Since your main concern is retaining the files that are important to you, what I'd suggest is creating a clone on a separate, external HD. You can do that by booting into Recovery again, partitioning the external with a GUID partition table and creating at least one partition for a clone (3TB externals are pretty inexpensive these days and you could have plenty of partitions large enough to hold what's on your internal drive) and using "Restore" in DU with the internal as the source and the external partition as the target. With that done, see if you can boot from that external clone. If you can't, go back to Recovery, and, instead of Disk Utility, choose Reinstalling the OS but with the clone you just made as the target. When that's done, see if you can boot from the external, and if you can, you will have a working bootable backup of your internal and all your files. You can then wipe the internal and Restore to the internal by using Restore in Disk Utility in Recovery Mode with the external as the source and the internal as the target. Normally, I'd suggest just reinstalling the OS on the internal, but if there's something wrong with the drive, you may risk making things worse, and first priority is to protect your files.

  • Can i backup on 3gs and restore on 4s?

    Can I backup an iPhone 3GS and restore onto a 4S?

    Ouch. That is a problem. Why don't you want to update to iOS 6? I actually like it on my 4S because Siri finally works (well, most of the time -- usually). Of course, I'm not real happy about losing Google Maps and the "baked in" YouTube app (the one in the app store just isn't as good), but it's been a pretty good upgrade on the whole.

  • User State backup from SCCM and Restore it from Command Prompt

    Am testing a scenario for my SCCM 2012 R2 Operation guy’s
    I have captured with default settings by using SCCM Task Sequence with USMT steps.
    see attachment file "USMT Capture Step.png"
    And restoration wanted to restore manually. (I have tested with SCCM 2012 R2 automated method and it works, However my Operations Manager wanted this to be done manually in the event of Failure of automated.. as they wanted to take some kind of local copy and
    restore)
    I have recovery key from SCCM Console as “XW7zaXhecBhAayMT2r+qtyWfEF5rc0FSBc9RH067ZV/FIrTCsfTXJZgBoofnukzWquTsb8Gx0l0Q+I71IqAQwymVFRBb4nXsSKpyobRd34NrNcivP/Xu1uaJvRuB70S6d2KIpwsa8KnwU47Zcx7HUX9Wu66y0pmCMOwm5ay5UwdAy8tnDGvwMabdWMbqsmfUTwd1QKcmMGpe1ruGoJcuoizom3PcNGnqoNyd5dCURpUmXVnEDWedqgDc+FN0ZC1k”
    However when executed below command it giving syntax errors.
    loadstate /i:migapp.xml /i:migdocs.xml c:\usmt /decrypt /key:mykey
    try with UNC alos
    loadstate /i:migapp.xml /i:migdocs.xml  \\Ipofsystem\usmt /decrypt /key:mykey
    See attchemnt as error.Png
    As per Microsoft article the command am using is correct one L any
    inputs here
    Ms command  https://technet.microsoft.com/en-us/library/hh825190.aspx
    loadstate /i:migapp.xml /i:migdocs.xml \\server\share\migration\mystore /decrypt /key:mykey
    Kindly help me with your experience
    Error Log file
    2015-04-23 21:12:00, Info [0x000000] LOADSTATE.EXE Version 6.2.9200.16384[gle=0x000000b7]
    2015-04-23 21:12:00, Info [0x000000] USMT Started at 2015/04/23:21:12:00.266
    2015-04-23 21:12:00, Info [0x000000] Command line: loadstate /i:migapp.xml /i:migdocs.xml c:\usmt /decrypt /key:****
    2015-04-23 21:12:00, Info [0x000000] Failed.[gle=0x00000002]
    2015-04-23 21:12:00, Info [0x000000] An error occurred processing the command line.
    Invalid store path; check the store parameter and/or file system permissions[gle=0x00000002]
    2015-04-23 21:12:00, Info [0x000000] USMT Completed at 2015/04/23:21:12:00.266[gle=0x00000002]
    2015-04-23 21:12:00, Info [0x000000] ----------------------------------- USMT ERROR SUMMARY -----------------------------------[gle=0x00000002]
    2015-04-23 21:12:00, Info [0x000000] * USMT error code 27: [gle=0x00000002]
    2015-04-23 21:12:00, Info [0x000000] +-----------------------------------------------------------------------------------------[gle=0x00000002]
    2015-04-23 21:12:00, Info [0x000000] | An error occurred processing the command line.[gle=0x00000002]
    2015-04-23 21:12:00, Info [0x000000] | Invalid store path; check the store parameter and/or file system permissions[gle=0x00000002]
    2015-04-23 21:12:00, Info [0x000000] +-----------------------------------------------------------------------------------------[gle=0x00000002]
    HunBoy Started learning from this page

    Got it...
    my mistake https://support.microsoft.com/en-us/kb/2892374?wa=wsignin1.0
    To resolve this issue, provide a path of the same folder level that was used in the scan state. Do not use the full path in the
    command. 
    For example, if the MIG file is located at "C:\store\usmt\usmt.mig," the LoadState command
    should be pointed to "C:\store" as follows:
    Loadstate.exe c:\store /auto
    now the issue is resolved 
    HunBoy Started learning from this page

  • Backup documents, formatting and restoring OSx

    Hello,
    I own a macbook pro with Montain Lion and recently (even before the upgrade to Mountain Lion) most of the applications started to crash continuously. This happens for reliable applications like iTunes, iPhoto, iMovie and MainStage. For this reason I have decided to format my computer and re-installing the OS from scratch. Before to do that I need to backup my documents (iLife, FinalCut Pro, MainStage, etc). Where do I find the documents? For example where do I find all the iPhoto projects including calendars, slideshows? I have also backup from TimeMachine but I am afraid that if I will use it, it will restore also the messy files that are now the reason of the software crashes.
    Hope you can help me
    Thanks

    You can do this from the Leopard installation DVD. Boot off of it and when you select your language you can then restore from a Time Machine backup. In the "Utilities" menu you should have an option there to restore from the Time Machine backup, and after selecting the source drive it will copy the most recent backup to your hard drive and reboot. Should be seamless and easy.

  • Backup from 9i and restore this backup to 10g using RMAN

    Hi all;
    I have a database 9i on SuSE9. And I want to restore another server this database's backupsets to 10g on SuSE10 using RMAN. Then I have run following scripts.
    On 9i Database: (SID=discoden)_
    RMAN > backup database plus archivelog;
    and I have three backupsets (05l87nik_1_1, 06l87nio_1_1, 07l87nml_1_1) and one controlfile backup (c-4279316798-20100310-00). then I copy these backuppieces to new server.
    On 10g Database:_
    +1. I have created udump and bdump folder into $ORACLE_BASE/admin/discoden/+
    +2. I have copied init.ora, pasted initdiscoden.ora in $ORACLE_HOME/dbs folder. And I have changed following parameters+
    db_name = discoden
    shared_pool_size = 350000000
    control_files = (/disk2/oracle/discoden/control01.ctl, /disk2/oracle/discoden/control02.ctl, /disk2/oracle/discoden/control03.ctl)
    user_dump_dest = /opt/oracle/admin/discoden/udump
    background_dump_dest = /opt/oracle/admin/discoden/bdump
    compatible = 10.2.0.3.0
    undo_management = auto
    +3. export ORACLE_SID=discoden+
    +4. cd $ORACLE_HOME/bin+
    +5. ./rman target /+
    +6. RMAN> startup nomount;+
    +7. RMAN> restore controlfile from '/disk2/setup/c-4279316798-20100310-00';+
    +8. RMAN> alter database mount ;+
    +9. RMAN> catalog backuppiece '/disk2/setup/05l87nik_1_1';+
    RMAN> catalog backuppiece '/disk2/setup/06l87nio_1_1';
    RMAN> catalog backuppiece '/disk2/setup/07l87nml_1_1';
    +10. SQL> alter database rename file '/disk2/oracle9i/databases/discoden/redo01.log' to '/disk2/oracle/discoden/redo01.log';+
    SQL> alter database rename file '/disk2/oracle9i/databases/discoden/redo02.log' to '/disk2/oracle/discoden/redo02.log';
    SQL> alter database rename file '/disk2/oracle9i/databases/discoden/redo03.log' to '/disk2/oracle/discoden/redo03.log';
    +11. RMAN > list backup; (With this command, I have learned last sequence number. For example 204)+
    +12. I have run following command on RMAN:+
    +run {+
    set until sequence 204;
    set newname for datafile 1 to '/disk2/oracle/discoden/system01.dbf';
    set newname for datafile 2 to '/disk2/oracle/discoden/undotbs01.dbf';
    set newname for datafile 3 to '/disk2/oracle/discoden/cwmlite01.dbf';
    set newname for datafile 4 to '/disk2/oracle/discoden/drsys01.dbf';
    set newname for datafile 5 to '/disk2/oracle/discoden/example01.dbf';
    set newname for datafile 6 to '/disk2/oracle/discoden/indx01.dbf';
    set newname for datafile 7 to '/disk2/oracle/discoden/odm01.dbf';
    set newname for datafile 8 to '/disk2/oracle/discoden/tools01.dbf';
    set newname for datafile 9 to '/disk2/oracle/discoden/users01.dbf';
    set newname for datafile 10 to '/disk2/oracle/discoden/xdb01.dbf';
    set newname for datafile 11 to '/disk2/oracle/discoden/DATASPACE1.dbf';
    set newname for datafile 12 to '/disk2/oracle/discoden/CARDEM.dbf';
    set newname for datafile 13 to '/disk2/oracle/discoden/MUHASEBE.dbf';
    set newname for datafile 14 to '/disk2/oracle/discoden/ORTAK.dbf';
    set newname for datafile 15 to '/disk2/oracle/discoden/MAGAZA.dbf';
    restore database;
    switch datafile all;
    recover database;
    alter database open resetlogs;
    +}+
    Then I have an error like following lines:
    +..........+
    media recovery complete, elapsed time: 00:00:04
    Finished recover at 06-MAR-10
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00601: fatal error in recovery manager
    RMAN-03004: fatal error during execution of command
    ORA-03114: not connected to ORACLE
    ORA-03114: not connected to ORACLE
    RMAN-03002: failure of alter db command at 03/06/2010 09:00:47
    ORA-01092: ORACLE instance terminated. Disconnection forced
    ORA-00704: bootstrap process failure
    ORA-39700: database must be opened with UPGRADE option
    ORACLE error from target database:
    ORA-03114: not connected to ORACLE
    I don't understand the mistakes. I hope your helps. Thank you.

    Hi,
    You have followed the steps correctly while restoring and recovering the 9i database under 10g home using RMAN except the last step of opening the database.
    Remove 'alter database open resetlogs;' from the rman script and rerun the script. Once the database is restored and recovered, open the database with RESETLOGS & UPGRADE option through SQL*Plus as below.
    SQL> alter database open resetlogs upgrade;
    Once the database is opened, create the SYSAUX tablespace and run $ORACLE_HOME/rdbms/admin/ upgrd.sql catupgrd.sql script to upgrade the database to 10g ( follow the steps for upgrading the database).
    MetaLink Note : 369644.1 - Answers To FAQ For Restoring Or Duplicating Between Different Versions And Platforms
    Regards,
    Vaibhav
    Edited by: Vaibhav on Mar 11, 2010 11:09 AM

  • Backup for Iphone4G and restore from backup to Iphone4S,but can not sync the applications? What's going on ??

    I backup my iphone4g in Itunes and then restore from backup to Iphone4S, the contact numbers, messages and pictures all can sync..but the applications can not sync? What's going on ?? Anyone knows?? Is the problem about the Itunes? Cos I am using Itunes 10.5...

    I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
    So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
    Thank you for any help you can give.
    Trish

  • If I forgot my "Encrypted backup password" can I make backup on icloud and restore it again on another iphone without asking about the forgotten encrypted password ?

    I Did encrypted backup to my iphone to save passowrds and all things on itunes and i forgot it now and tried everything I could remember and can't remember the password. Now I wanna backup my iphone again on icloud if I backed up my iphone and need to restore from icloud backup again is it will ask for the same forgotten password ?

    Thanks Brett L,
    Thanks for your reply. I'll read this article and I wish it helps. Have a good day too Brett L. Another question please when we backup to itunes its approximately (12 GB my backup) and in restoring apps downloaded back from computer but in icloud its only 5 GB I have so this apps will be downloaded from beginning but with my data right ? Which means in this case it will not difference which backup I do cause in two cases i'll have what i need, is this right ?
    Many Thanks, Brett L.
    K_M_K

  • Can you backup phone contacts and print them out?

    Are you able to view contacts and print them out?

    settings - icloud - contacts - on
    then log into icloud.com - contacts

  • Sold ipod. need to backup up apps and restore to factory settingds

    i sold a 4th gen ipod. I need to back up apps and then wipe it clean. How do i do this

    http://support.apple.com/kb/PH1692
    http://support.apple.com/kb/HT1414
    Regards.

  • Hi would anyone know how to remove malware or virus from an ihone 4.i would be prepared to do a system backup and restore factory settings through itunes but fear i might infect my computer.many thanks in advance.

    please could somebody help.i think my iphone4 has malware or a virus and would really appreciate suggestions on how to remove.wy safari browser is frozen and thought about a system backup to itunes and restoring factory settings.worried this would also infect my computer?
                     thanks in advance.

    If your iPhone is jailbroken then it doesn't have a virus.
    Your problem is most likely something else and the chances of your computer catch it are nonexsistant.
    Allan

  • Backup and restore VXFS

    Hí,
    I´ve upgraded a vxfs file system to layout 6 and i need to downgrade to layout 5. I´ve tried make a backup by dd and restore by dd in a new file system with layout 5.
    Anyone can help me?
    Thank you,
    Fernando

    Try this
    I am making an assumption here that you have a mounted vxfs filesystem and a mounted filesystem for output (the location of the DD file) uless you were DD from one to another....
    There are several ways....
    If you have a vxfs filesystem and a partition that you want to dump out to try this:
    vxdump 0f /<mounted partition>/disk.vxdmp <filesystem to be dumped>
    then re-layout the filesystem and use vxrestore to get the files back.
    cd to the destination and then
    vxrestore -xf /mounted partition>/disk.vxdmp
    If you're moving it from one place to another, for example you have old layout 6 filesystem on /6 and destination layout 5 partition /5 try this
    vxdump 0f - /6 | (cd /5; vxrestore xf -)
    This is straight from the vxrestore man page. No magic here, been doing it since tar days.
    Hope this helps.

Maybe you are looking for

  • Storage Location wise Stock details on a specific Date

    Dear All, Please help me with any T-code or Process by which I will be able to view the opening & closing stock storage location wise on a specific date. In MC.9 it shows the stock on current date or Month-End. In MB5B it will show the stock but not

  • Unable to activate Client Profile within Client-Based Groupware Integration

    Experts - Please help us! We are trying to activate a new Client Profile wiithin Client Based Groupware Integration. We are receiving an error message that  "Multiple profiles not allowed for same role, country, language combination." We believe we a

  • Catalyst 4000 - Config registers and error crashes

    Two questions. I have two Cat4500s, one of which suspiciously rebooted a few hours ago. I don't have valid syslog data for these devices. This is the system boot message: System returned to ROM by abort at PC 0x0 I haven't been able to find any infor

  • PSE 9 Organizer freezes

    I just recently installed PSE 9. Every time I get past the Welcome Screen (with the organizer behind it..btw how do you change this option?), the Organizer freezes. I have to click Ctrl>Alt>Delete to get out of it. I have re-installed PSE 9 3 times.

  • IDOC Volume

    Whether there is any program or any transaction is there to find out the number of IDOCS has been processed in a system for a stipulated period? (We are sending PO to our suppliers and I want to determine the volume?) 2) The average lenght of an IDOC