Backup problem in SAP BW 3.5

Dear All,
I am using SAP BW 3.5 with Oracle 9.2. I started the job via DB13 after that I am receiving the error
Job started
Step 001 started (program RSDBAJOB, variant &0000000000029, user ID BASIS)
No application server on database host - rsh will be used
Execute logical command BRBACKUP On host biddb
Parameters:-u / -c force -t online -m all -p initBID.sap -w use_dbv
SXPG_COMMAND_EXECUTE failed for BRBACKUP - Reason: program_start_error: For More Information, See SYS
Job cancelled after system exception ERROR_MESSAGE
Please help me to solve the problem
Regards,
MMSK

Look at the sapxpg logs for errors dev_cp, dev_xpg.
Regards
Juan

Similar Messages

Backup problem in SAP

Dear Team,
I am using SAP 4.7 with Oracle 8.1 . During Backup via DB13 . I am receiving the error
CPMMIT FAILED IN RSORAADM, OBJECT JOB , FUNCTION CREATE, RETURN CODE 4
Whats the mean this.
Regards
manu

Dear Marks,
When scheduling backup during db13
Fist I give start Time
Then Select Redo log backup
Then continue, It ask Generic tape name i.e sap_prd01
Then I Continue
Profile initPRD.sap
Select Verifaction
Then this messege comes
CPMMIT FAILED IN RSORAADM, OBJECT JOB , FUNCTION CREATE, RETURN CODE 4
Where is the problem ?. I have change in Parameter i.e
Backup_dev_type =disk
backup_root_dir =f:\BACK
Because I am taking a backup in Drive F in BACK folder
Plesae Help
Manu

Problem in SAP Backup DB13

Hi,
After kernel upgrade we tried to take offline backup through DB13, before going with the SAP upgrade.
But, Now we are facing backup problem through DB13 while initializing the tape.
OS: Windows 2003
DB: Oracle 10.2.0.2
Kernel Release : 46D
Kernel Version: 46D_EX2 Path level: 2571
Machine: IA64
Log:
Job started
Step 001 started (program RSDBAJOB, variant &0000000004646, user name ZADMIN1)
Execute logical command BRBACKUP On host AP-CHE-SAP-02
Parameters: -i force -c force -n 1 -v SCRATCH
BR0051I BRBACKUP 7.00 (13)
BR0055I Start of database backup: behjlsyp.tib 2011-12-06 11.37.43
BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: behjlsyp
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/nmt0
BR0131I All volumes get the name SCRATCH
BR0129I Force option set - no label checking during initialization
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0207I Volume in device: /dev/nmt0 will be initialized with name: SCRATCH
BR0280I BRBACKUP time stamp: 2011-12-06 11.37.43
BR0226I Rewinding tape volume in device /dev/mt0 ...
BR0278E Command output of 'mt -f /dev/mt0 rewind mt -f /dev/mt0 rewind mt -f /dev/mt0 rewind':
mt: opening '/dev/mt0': The system cannot find the file specified.
mt: opening '/dev/mt0': The system cannot find the file specified.
mt: opening '/dev/mt0': The system cannot find the file specified.
BR0280I BRBACKUP time stamp: 2011-12-06 11.37.43
BR0279E Return code from 'mt -f /dev/mt0 rewind mt -f /dev/mt0 rewind mt -f /dev/mt0 rewind':1
BR0213E Winding tape volume in device /dev/nmt0 failed
BR0219E Initialization of volume SCRATCH in device /dev/nmt0 failed
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2011-12-06 11.37.43
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
Note: We tried NT Level Backup, it was successfully.
Please help us to resolve the issue.
Regards,
Bharathi

Dear Deepak Kori,
Thanks, I pasted the init file for your reference. Seems to be correct.
init<SID>.sap:
address of backup device without rewind
[<dev_address> | (<dev_address_list>)]
no default
operating system dependent, examples:
HP-UX: /dev/rmt/0mn
OSF1:   /dev/nrmt0h
AIX:    /dev/rmt0.1
SINIX: /dev/ios0/rstape005n
SUN:    /dev/rmt/0mn
NT:     /dev/nmt0
tape_address = /dev/nmt0
address of backup device without rewind used by brarchive
default: value of the tape_address parameter
operating system dependent
tape_address_arch = /dev/nmt0
address of backup device with rewind
[<dev_address> | (<dev_address_list>)]
no default
operating system dependent, examples:
HP-UX: /dev/rmt/0m
OSF1:   /dev/rmt0h
AIX:    /dev/rmt0
SINIX: /dev/ios0/rstape005
SUN:    /dev/rmt/0m
NT:     /dev/mt0
tape_address_rew = /dev/mt0
Even also the same problem occurs and tried with the new tape too, pls help us.
Regards,
Bharathi

Some problem about SAP R/3 ~ I need some detail solutions and suggests

I need some detail solutions and suggests about below these problems:
Problem 1: SAP Management Console cannot start successfully
     Problem 1.1: Click on SAP Management Console, but yellow light continues for a long period of time.
     Problem 1.2: In DOS, startsap command cannot start SAP R/3.
     Problem 1.3: Oracle 9i database automatically shutdown by itself.
     Problem 1.4: There is very low disk storage left (say less than 50MB) in the hard disk where Oracle 9i database is installed in the server.
Problem 2: Problems in User Maintenance and Security of the SAP R/3 System
     Problem 2.1: Super user account password was lost (e.g. SAP* password was lost)
     Problem 2.2: Super users DDIC and SAP* were dropped in table usr02 in Oracle.
     Problem 2.3: Some users have been locked or deleted by an ABAP programmer who has been granted with almost superuser profiles. For example, an ABAP programmer has been granted a profile of SAP_ALL and SAP_NEW but the system administrator would like to restrict all programmers form using SU01, SU02, SM01, so that no programmers can maintain other user's accounts.
Problem 3: Problems in the configuration of client copy
     Problem 3.1: A copied client from the Client 000 cannot be customized.
     Problem 3.2: No sample data in IDES after a successful client copy.
     Problem 3.3: Logging on without being authorized. A new client is created and client copied and transported successfully. However, anyone can log into the system using user SAP* with the default password PASS.
Problem 4: Problems in the installation of SAP R/3 Server
     Problem 4.1: Computer Name of the SAP R/3 server has been changed after the full installation of Oracle 9i and SAP R/3.
     Problem 4.2: A network card of a server was faulty and it was replaced by a new network card but the SAP R/3 license was expired.
     Problem 4.3: You would like to reinstall SAP R/3 on a server which has previously installed with SAP R/3 but the same error message appears during the re-installation.
Problem 5: Problems in the backup and recovery of Oracle 9i Database
     Problem 5.1: A redo log file was lost and the database could not be started.
     Problem 5.2: A group of data files were accidentally deleted and the database could not be started.
     Problem 5.3: Both the online redo log files and archived redo log files have been damaged.
Problem 6: General problems regarding the general operations and the connection to the SAP R/3 System
     Problem 6.1: After a reboot of the Windows 2003 Server, SAP service is not automatically started.
     Problem 6.2: Some users complained that the performance of SAP R/3 is really very slow.
     Problem 6.3: A user complained that his/her password was correct but he/she could not lock on the client because it was locked.

Problem 2
2.1 If user account of the sap* is lost u can retrive by loging into os level as sidadm type this command
DELETE SAP<sid>.USR02 where BNAME='SAP*' AND MANDT=100
This 100 is the client in which u want to delete the sap*
after that restart the server and login as sap* with the default password as pass
there is also another way of doing this if needed u can catch me at [email protected]

Backup Problem with only Production Server

Hi all
Here i have backup problem in only production server. In my tape drive device all schedule backup of Development server and Quality Server and Production server . In this i get all backup in Development and Quality server, But in Production server backup was fail and not only one all backup is fail from last 2 days . So can u tell me what is the problem with my production server and how can i find it in production.
And any hardware issue or OS issue is responsible for this.
Please help me out.
Thanks
Keyur

Hi,
Can u pls post us the backup log? Also let us know ur product details like OS, SAP, DB version and also the backup tool(if any).
Regards,
Varadharajan M

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

Problem in SAP R/3 Console

Hai to all,
I have a problem in SAP R/3 Console , when i start the sap R/3 management console, it is starting from gray color to yello but it is not going to green color again it is going to gray.I did not understand the problem.... Can any one help me .
Thanks,
Nagaraju.

post ti BAIS related ?'s BASIS forum.

Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?

hello,
I went to the PAM in the SAP Marketplace to see if SAP GRC AC 5.3 could connect to SAP R/3 4.7 Enterprise but I can't see all the "Add-On Product Version for...", it's cut off.
Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
If I can't is there any proof about it? I have to show it to a client.
Best Regards,
Pablo Mortera,

Pablo,
GRC AC 5.3 works perfectly fine with SAP's R/3 4.6c, mySAP ERP 4.7 and ECC systems. In fact we have two 4.7 Enterprise systems connected to GRC AC 5.3 system.
You can get the details of supported SAP ERP systems under prerequisite section of Info page of GRC AC 5.3 , it can be accessed on marketplace at -
Downloads-->Installations and Upgrades - Entry by Application Group > SAP Solutions for Governance, Risk, and Compliance>SAP GRC Access Control>SAP GRC ACCESS CONTROL>SAP GRC ACCESS CONTROL 5.3
Just ensure to have proper BASIS and ABAP support pack level as mentioned in prerequisites.
Regards,
Amol

Problem with SAP logon 720 for printng with Citrix.

Hi,
I have a problem with sap logon 720 when printing for Citrix, one time print and other time don't print....
I try to start SAPLPD for prompt comand... it's start but don't print....
i'm write here for look if other people have this problem... I dont know what I can do.....
Thank you very much....

Hi Itmar,
I was having the similar issue on my Windows Server 2003 Terminal Server. At times SAP prints stop working. Then i changed Printer Type to "G" and it had solved the problem. It skips the use of SAPLPD service and calling windows printing service directly.
Just try with that.
Regards,
Gaurav

One more Problem with SAP query

Hi All,
I am having a problem with SAP query
Execution of SAP query transaction is leading to Dump
the dump says Field 'R01' contains no fields, syntax check on the program shows same error.
When I tried regenerating the Query in SQ01
" Query Specification cannot be use to generate list
Ranked list contains only numeric fields
Please help me

Gianpiero Bucchieri wrote:
> So its important to listening the following tables too: Faktura (invoice), Partner Role, Partnernumber and the requierements number. The table are EKKO EKPO AND VRKPA OR vbkd, but if I join this table the query doesn't listining any results. If I cancel this 3 or 4 table and I start the query, the listening are ok.
>
I am not sure what business process you are describing here - is it some kind of third-party sales order? If so, your join is wrong.
From VB E P, firled BANFN and BNFPO you can go to table EBAN, where in field EBELN you will find the number of the purchase order (if somebody already had an MRP+Me58 run over the PR) which will lead you to table EKKO, and EKPO.
So what we have here (essentially is):
VBAK -> VBAP -> VBEP -> EBAN -> EKKO -> EKPO
But that only solves one of your problems - you still have a long way to go to get invoices, partner and partner roles into there and I am beginning to ask myself what exactly it is you want to evaluate.
Care to explain?
Edited by: Mylène Dorias on Apr 1, 2010 2:10 PM

Who to reverse the OSV if it is reverse what is the future problem in SAP?

Who to reverse the OSV (Asset) if it is reverse what is the future problem in SAP?

CEE6 wrote:
What video format (including embedded audio) is able to be viewed and heard by both OSX Lion users and Windows users?
You have to make a distinction between the container format (eg, AVI, MKV) and the video/audio format (eg, DIVX). For instance, without additional software, QuickTime can play .avi files with the IndeoVideo codec, but not .avi file with the DivX codec). Further, you have to make the distinction between what can be played using an independent player, eg, QuickTime Player, and what can be played within the presentation software (Keynote or PowerPoint).
You can refer to
<http://mac2.microsoft.com/help/office/14/da-dk/powerpoint/item/7acce321-36fb-48d 6-8c76-12cb3a0063ee>
for suggestions. In practice, for presentation clips, I think you're limited to MPEG-2 and MPEG-4. I don't know if an additional MPEG-2 QuickTime component is required under Lion, you'll have to check that yourself. So, in the end, it's MPEG-4. Both Keynote and PowerPoint Win/Mac should be able to handle it.
can anyone suggest a safe application that I can purchase from the apple app store that will allow me to convert video files
What's a 'safe application'? And why do you have to buy it from the App Store (yuck!)?
Handbrake, as mentioned by X423424X, is free and works very well. There are probably others, too.
this forum is the best place to learn
Perhaps, but it may not be the place to get answers to this question. Try a PowerPoint Mac user forum, they would have more experience in these x-platform issues. This forum is oriented more towards the hardware side of the MBP platform.

Quantity field conversion problem in SAP script

Hi experts,
I have problem with sap script quantity field conversion.
In purchase order the actual value of field( MDPM-ERFMG) is 3,500.
But in Print preview it is showing only 3.5
Any one Please help me in this problem
thanks in advance
murali

Hello,
check this:
Number of Decimal Places
A program symbol of one of the data types DEC, QUAN, and FLTP can contain decimal place data. Use the option below to override the Dictionary definition for the number of decimal places for the formatting of this symbol value.
Syntax
&symbol(.N)&
The EKPO-MENGE field contains the value 1234.56. The Dictionary definition specifies 3 decimal places and an output length of 17.
&EKPO-MENGE& -> 1,234.560
&EKPO-MENGE(.1) -> 1,234.6
&EKPO-MENGE&(.4) -> 1,234.5600
&EKPO-MENGE&(.0) -> 1,235
REgards,
Vasanth

Data Backup Strategies in SAP

HI ALL,
What are some of the different ways of backing up SAP Data?

HI,
There are many backup strategies for SAP.
1) If you can shutdown your server at night, you can take an offline database backup with redo logs.
2) If your server needs to remain on all 24 hrs, you can take an online backup with redo logs.
3) Once in 15 days or a month, you can take an O.S. level backup.
Also devise a strategy to keep a copy of backup at a different location and follow it. There should be at least one copy of O.S. Level backup at any other location other than your office premise.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar.

Printing problem for SAP Script

Dear Friends,
I am facing strange problem for SAP Script. In the billing document output the sold to party and ship to party address are displaying. When user print the billing document on laser printer it print the Country for Sold to and Ship to. But when it print the same billing document on normal printer (other than laser) the Sold to country not printing.
The print preview of billing document in SAP correctly display country for Sold-to and Ship-to.
I have recently make changes in the SAP Script form (Address window) to display country for Ship-to which was never displayed before. I have added FROMCOUNTRY option after COUNTRY in address window. COUNTRY will be Ship-to and FROMCOUNTRY will be VBDKR-SLAND.
Can any one help me to solve this problem.
Regards
Nilesh Shete

Used custom address print option instead of using ADDRESS

Problem with SAP PI7.0 J2ee Engine starting

Hi,
Problem with SAP PI7.0 Server
I am using AIX6.1 and p570
J2ee engine is not starting but I am able to login to ABAP engine.
When I am trying to long in through internet explorer it is not working.
How to check J2ee engine started or not.
If it is not started then how to start J2ee engine.
If J2ee engine problem is there then how to solve the issue and where to check to solve the issue.

Hi,
How to check J2ee engine started or not.
Check the url http://ipaddress:5xx00/index.html
If this url shows you the system info page then you j2ee engine is up.
If it is not started then how to start J2ee engine.
Check your server0.log file.
If J2ee engine problem is there then how to solve the issue and where to check to solve the issue.
Check for the problems in log file and do search in sdn or in the market place you will get plenty of info read them and try to resolve the errors.
Regards,
Vamshi.

Backup problem in SAP BW 3.5

Similar Messages

Maybe you are looking for