Backup & Recovery through OEM

HI,
I have Oracle 10g Application Server installed on Windows server 2003, with infra and portal on two different nodes...i need to setup a backup strategy using OEM for the infra database..i already put my database in Archivelog mode and scheduled a RMAN backup through OEM at Flash Recovery Area..
Please suggest , what all precautions i need to take to preserve this backup and what steps i need to follow in case i need to recover my database ( Manually or using OEM ).
I appreciate ur answer in detail..
regards,
Sajad.

I need suggestions ..please..
thanks.

Similar Messages

Cold Backup / Recovery for OEM Grid

Hi friends,
OEM 10.2.0.5
RHEL 4.6
How do you Clone or Backup OEM Grid (Management server(OMS) , agent, and repository database)?
in case of disaster?
They are all under our server dir /home/oracle. If I have a backup of my /home/oracle on external tape or disk,
and ithappened that my OEM server crashed and it can not be fixed anymore. Then we buy another server
with the same specs and OS. Then copy/download the backup. How can I start it up? Just like the original setup?
Thanks a lot.
Ms K

ytterp2009 wrote:
thanks :)
So, I dont need the local OEM anymore ;)
Yes ..
By the way, does the agent keep backup of its gathered data? Or does it delete them automatically after it is sent
to the OMS server? I am afraid that my agent disk space will get full.
Does agent use oracle tables to keep data? or just text filesAgent gathers data and stores it in form of xml in $AGENT_HOME/sysman/upload and sends these xml to OMS and deletes them automatically.In OMS they are stored at $OMS_HOME/sysman/recv . Then these xmls are processed by loader and get loaded into repository DB and deleted automatically from directory.
By default your agent can store data upto 50 MB and once it is full then your agent will stop working. Check out parameters in $AGENT_HOME/sysman/config/emd.properties file.
please check :
http://racdba.wordpress.com/2009/12/05/oem-agent-common-errors/
How do I know what time/schedule or how frequent does the agent updates our OMS server?
How often does the agent gathers data from the managed database?It depends on the frequency of metric applied for the target.
Please read :
Enterprise Manager Grid Control Agent 10g, Process Control (Start, Stop & Status) Troubleshooting Guide [ID 548928.1]
Understanding the Enterprise Manager 10g Grid Control Management Agent, Directory Structure and Key Configuration Files. [ID 234872.1]
Regards
Rajesh

Need help for DB backup through OEM 11g grid

I need to know how to schedule the hot backup of whole DB using OEM 11g grid.
In our system there is a backup running for DB (10gr2). It is not scheduled through jobs.
I am not able to find this scheduled db backup information from OEM.
Can anyone guide me how to check the current backup schedules and backup script ?
Is there any good document for this ?

Hi Dhaval,
You may look out option for restore backup from production and restore the same on QAS.
Refer SAP note
683447
SAP Tools for MS SQL Server
Which shall help you with post restore steps on the database.
Once DB and SAP is up you may perform generic post restore steps like
- STMS re-configuration
- Adjusting profiles
- Executing BDLS
- Importing RFCs and user master ( if exported before the restore)
- Adjusting Partner profiles
- Configuring backup
- Apply SAP license
Above are just a few of them to name. There could be many more as per customer landscape.
Regards,
Deepak Kori

Customize OEM Grid Console screens to exclude "Backup/Recovery" from Maint

We need to be able to exclude some features in the OEM Web Console.
For example, the features such as:
"Backup/Recovery" feature and also the "Patch" link in the "Deployments" feature.
Help. How can I do this?

Hi,
you cannot remove those topics from the console. What an account can do and what it cannot do depends on the privileges of that account. Backup/Recovery needs the SYSDBA role, every action will fail started by a user not having this privilege. Someone who wants to patch needs OS access to the target machine. So don't give 'normal' users such access rights , they can see the features, but they cannot use them.
Regards
Werner

Backup Failure using OEM (Oracle 9i)

Backup Failure using OEM
I have oracle 9i (windows 2000 server)
I tried to make a fullbackup using OEM, it gives me NO error messages
I got result file with 890 MB (my Db is not huge),
but when I go back to the JOBs in OEM I found the status of the job FAILED
I tried to do the same thing using incremental backup level 0, but I got the same result
any Idea why the job didn't complete successfully
thanx in advance

Here is the deal.
I need to be able to work in the OEM for my class. (Oracle DBA in Training) It is a significant part of my grade to be able to find the required help through forums like these to help me get the backup/recovery process to work through the OEM. My books deal with the OEM in a Win2000 Pro/Server environment, and don't take into consideration the variances in XP Pro. My install works great, other than I am receiving a "Fail" on my OEM Backups under Jobs. It further explains that I do not have the proper permissions to perform the backup job that was created. My instructor is completely hands off when it comes to help. So if anyone has run into this problem and been successful in fixing the problem without using a different utility. Please let me know.
Thanks in advance,
Vic

Error during Backup/Recovery settings configuration

Hi all,
Using the Oracle Enterprise Manager 10g Application Server control,
i am configuring backup/recovery settings for my infrastructure tier in a 10g Rel 2 application server environment. however after specifying the various locations for Log Files, Configuration files, Metadata repository database backup etc i get the following error after clicking the 'Ok' button.
An Internal Error has occurred while performing the operation.
Performing configuration ...
oracle_sid: cinfra
The command /oracle/appn/oracle/infra/perl/bin/perl /oracle/appn/oracle/infra/backup_restore/bkp_restore.pl -m configure -h /oracle/appn/oracle/infra -f > /infrahome/backups/log_files/2009-12-06_17-13-38_output.log failed with return code 255
i am at a loss as to why i am having this error and how to fix it.
I examined the log file and saw an error snippet saying
*"Unable to get dbid from the database. Please ensure that ORACLE_HOME and ORACLE_SID are set to the same values used when starting up the database and that the database is open.... Failure: Configure failed"*
Also examined another file generated at the same time as the output log file and in there i saw the following
*"ld,so.1: oracle: fatal: relocation error: file /oracle/appn/oracle/product/10.2.0/cm2t/lib/libjox10.so: symbol kgestKguard_: referenced symbol not found*
*ERROR:*
*ORA-12547: TNS: lost contact*
*SP2-0751: Unable to connect to oracle. exiting SQL*Plus"*
Apart from the infrastructure database, i have another database with SID 'cm2t' on the same machine and i am suspecting that OEM Application server control is referencing the wrong file while it's doing it's work. How do i tell it to look in the right place if indeed that is the cause of my problem?
In my config.inp file all the right parameter values are in place.
Thanks.
Steve.

Hi AMN,
Thanks for your reply. I managed to solve it by taking the following steps.
I use the runstartupconsole.sh script to start up my infrastructure tier. At startup it was using an LD_LIBRARY_PATH pointing to that used by an existing Oracle database instance on the same machine.
I set ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH etc correctly before running the runstartupconsole.sh script and after that i was able to setup my backup/recovery settings properly.
I hope this will be useful to others.
Steve.

Cleanup job to remove archive logs automatically through OEM Grid control

Hi All,
I am working on 11gR2 3node RAC database. we have enabled archivelog mode for the databases and don't have any backup processes (like rman) and not using ASM.
Please let me know how to cleanup the old archivelogs automatically through oem Grid control.
I have some idea how to do it in standalone database, but not sure how it works in RAC environment through OEM. Please let me know.
Thanks in advance.

Hari wrote:
Thanks for your reply and The requirement is, put the DB in archive log mode and cleanup the old archive logs which is more than 5days. We are doing this because of space issue and don't have backup for these files and the DB must be in archive log mode.
I have few question here.
1. Is it must to take the backup of the archive log files and before delete them?No, but if you aren't backing up, why create the archivelogs in the first place?
2. If i delete them without backup, what is the negative impact?If you aren't backing up the database in the first place (as you stated in an earlier post) then it really doesn't matter what you do with the archivelogs as they are worthless anyway.
3. What is the recommended process to do it?My recommendation is you first start using rman to backup the database
4. I need to setup this process through OEM grid control.
Please let me know.
Thanks,
HariIt all begs the question which has already been asked and you avoided answering . . . if you are not taking backups, why bother archiving? The archive logs have ZERO VALUE outside of a consistent backup strategy. So how is it you have a 'requirement' to run in archivelog mode but no requirement for backups?
Edited by: EdStevens on Dec 2, 2011 9:30 PM

Monitoring the Hyperion Essbase Database through OEM.

Hi DBAs,
I have setup the Hyperion Planning application (on windows 2003 server 64bit) with Essbase DB and Oracle (10.2.0.3) RDBMS (on Linux 5.3 64bit). I want to monitor the Planning Applicatoin and Essbase DB through OEM Grid Control. I have already installed the agent on Windows and Linux Server. Only able to monitor the Oracle RDBMS.
Can someone guide me how I can monitor the Essbase DB? Also how can I setup the Hyperion Planning Application with OEM ?
Thanks
-Samar-

See the below link
http://www.oracle.com/technology/products/bi/epm/pdf/sys9_oem_integration.pdf
It may help,
Regards,
http://www.oracleracexpert.com
Click here to [Send EMAIL using UTL_MAIL in Oracle 10g |http://www.oracleracexpert.com/2009/11/send-email-using-utlmail-in-oracle-10g.html]
Click here for [Backup and Restore SPFILE and PFILE|http://www.oracleracexpert.com/2009/11/oracle-spfile-and-pfile.html]

INCREMENTAL MERGE BACKUP & RECOVERY

INCREMENTAL MERGE BACKUP & RECOVERY
=====================================
1) 개요
RMAN을 이용하여 database의 Image copy를 Backup하고 그 Backup에 retention policy만큼의 Incremental Backup을 적용하여서 복구의 시간을 단축한 Backup의 방법입니다.
즉 retention policy에 설정되어있는 시간 전의 최후의 시간까지 Image Copy를 보장하는 방법이며 Disk Space는 Incremental Backup만 사용하는 방법보다는 Image Copy를 사용하는 것임으로 많이 소요됩니다.
물론 Backup & Recovery 정책에 따라서 Retention Policy를 Recovery Window나 Redundancy 2이상으로 설정할 수 있으나, Incremental Merge Backup & Recovery의 장점을 극대화 하기 위해서는 Redundancy 1 (Default)로 설정하는 것을 권해드립니다.
2) 장점
- Recovery 시에 최근 Incremental Backup의 정보들이 적용이 되어있기 때문에 최소한의 시간으로 Recovery 작업을 진행하실 수 있습니다. 물론 장점을 극대화 하시기 위해서는 Retention Policy를 redundancy 1로 설정해 주시길 권해드립니다.
- Datafile들의 Destination을 Backup된 Image Copy가 있는 곳으로 Switch 하여 Restore하는 시간을 단축하셔서 Recovery를 진행하실 수도 있으나 Recovery 후의 관리의 용이성을 위해 부득히한 경우를 재외하고는 권장하지 않습니다.
3) Syntax
- Backup
RMAN> BACKUP INCREMENTAL LEVEL 1
FOR RECOVER OF COPY
WITH TAG WEEKLY DATABASE;
위 명령어를 사용하시면 WEEKLY라는 Tag로 생성된 Copy가 없을 시에는 Image Copy를 Weekly라는 Tag로 구분하여 Backup을 받게 됩니다.
* 여기서 Copy라 함은 FOR RECOVER OF COPY라는 구문을 사용하여서 만든 Image Copy를 뜻합니다.
RMAN> RECOVER COPY OF DATABASE WITH TAG WEEKLY;
위 명령어를 사용하시면 현재 받았던 Incremental Backup을 Weekly라는 Tag를 가지고 있는 Database Copy에 적용을 하게 됩니다.
RMAN> Delete Obsolete;
위 명령어를 사용하시면 현재의 Image Copy에 적용된 Incremental Backup을 재외한 나머지 Incremental Backup들이 Delete됩니다.
-Recovery
RMAN> switch database to copy;
문제가 발생하셨을 때 위 명령어를 사용하시면 모든 datafile의 pointer들은 image backup copy를 바라보게 됨으로 Restore의 시간을 절약할 수 있습니다.
4) Retention Policy에 따른 Syntax 변화
* 기본적으로 INCREMENTAL MERGE BACKUP & RECOVERY의 장점인 Recovery 시간을 극대화 하기 위해서는 Retention Policy를 redundancy 1(Default)로 설정하시는 것을 권장해드립니다.
하지만 User가 Backup & Recovery 계획을 변경하여 retention policy를 recovery window 또는 redundancy 1 이상으로 설정해 주시면 Obsolete한 Backupset을 Delete하는 부분과 Backupset을 적용시키는 부분을 수정해 주셔야합니다.
- Recovery Window of 2
Recovery Window를 2일로 설정해 놓으시면 Backup시에는 똑같은 Syntax를 사용하실 수 있으나 Recover copy of database 명령어는 아래와 같이 바뀌어야 합니다.
RMAN> BACKUP INCREMENTAL LEVEL 1
FOR RECOVER OF COPY
WITH TAG WEEKLY DATABASE;
RMAN> RECOVER COPY OF DATABASE WITH TAG WEEKLY until time 'sysdate-2';
왜냐하면 retention policy에 마춰서 image copy도 2일전의 상태로 보관되어야하며 그에 따라서 2일동안의 Backupset들도 보관되어야하기 때문입니다. 만약 until time을 사용하지 않으시면 incremental backup들이 obsolete 상태로 안변하게 됩니다.
- Redundancy 2 이상
Redundancy 2이상으로 설정해 주시면 2개 이상의 Tag를 보관하는 효과로서 역시 예상대로 Obsolete로 안 변하는 현상이 발생됩니다.
DAY 1)
RMAN> BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG DAILY DATABASE;
-위와 같이 실행하시면 한개의 Database Copy (Tag DAILY)가 생성됩니다.
DAY 2)
RMAN> BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG DAILY DATABASE;
RMAN> BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG WEEKLY DATABASE;
-위와 같이 실행하시면 한개의 Database Copy (Tag WEEKLY)와 한개의 Backupset (Tag DAILY)가 생성됩니다.
DAY 3)
RMAN> BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG DAILY DATABASE;
RMAN> BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG WEEKLY DATABASE;
RMAN> BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG MONTHLY DATABASE;
-위와 같이 실행하시면 한개의 Database Copy (Tag MONTHLY)와 두개의 Backupset (Tag DAILY, Tag WEEKLY)가 생성됩니다.
DAY 4)
RMAN> Delete Obsolete;
- 위와 같이 실행하시면 DAILY Tag와 관련된 부분이 Delete 됩니다. (최신 2개의 Tag관련 Backup만 보관)
RMAN> Delete Obsolete redundancy 1
- 위와 같이 실행하시면 DAYLY Tag와 WEEKLY Tag 관련된 부분이 Delete 됩니다. (Redundancy 1로 설정한 것과 똑같은 효과)
Reference:
Article-ID: Note 351455.1
Title: Oracle Suggested Strategy & Backup Retention
Article-ID: Note 303861.1
Title: Incrementally Updated Backup In 10G
글 수정:
hunlee

I would always include an archivelog backup:
... with tag 'fullbackup’ database plus archivelog delete all input;
And at the end:
delete obsolete noprompt;
That delete incrmental backups already applied to the basic image copies.
Your configuration allows only limited point in time recoveries. As soon as an incremental backup is applied to the image copies, you cannot go back in time. To change this you can add a 'until time' clause, for example:
recover
copy of database
with tag 'fullbackup until time 'sysdate-11';
This creates a recovery window of 10 days, only image copies older than 10 days will be changed.
Werner

Cannot save formsweb.cfg through OEM

Hi All,
I am using Enterprise Manager with Oracle Application Server (Forms and Reports services), and cannot save changes to the formsweb.cfg file through OEM.
I can make changes to the file formsweb.cfg manually (with notepad), and the server itself sees these changes, but Enterprise Manager still shows the original settings.
In our application always we need to do change the of .JAR file simenteneously and it will be deployed in Particular user instance.
I initially thought this was a cache problem, and re-booted the host. After the rebooting also i cannot see the manual changes in OEM , but it still refuses to make changes itself.
Does anybody have any ideas??
Thanks in Advance!
Santosh

This is the forum for the SQL Developer tool. You should ask your question in an OEM or Forms forum

Is there a way to manage your discoverer connections other than through OEM

In chapter 6 of the administrator guide of Discoverer Admin it states to manage your Discoverer connections through OEM is there another way to do that other than using OEM.
Help, Our DBA wants to know why I want OEM. I have tried to explain.
Can you help me?

Hi
You can create private connections, which are local to your machine and browser. Alternately, you can use SSO connections, provided these are activated by your administrator. Neither of these connections require management via the OEM.
Regards
Discoverer Product Management

IPod backup/ recovery files on a PC

Where can I find my iPod backup/ recovery files on my PC (Windows XP) to delete old backup files?

i already followed what is listed in that support section. but still im loosing 10+ GB of disk space because of the backup i made which i cant delete because its nowhere to be found. pls help asap. thanks.
sorry for necro posting.

Database login through OEM

Dear all,
When try to log in to target database in OEM, the web browser hanging for a long time before disconnecting.
The browser interface is as the follwoing. Even connect as sysdba doesn't work.
Username:
Password:
Database:
Connect As:
The user account can connect to database using sqlplus and host login through OEM works fine too. Could some one give a hint on this problem?
Thanks
Jiang

I hope the following is a better description.
After log in to OEM browser located in the OMS server, select a target database instance, which is in the remote machine. The following page has four tabs, Home, Performance, Administration and Maintenance. Select Performance, the next page is Database login form needs following information:
user name:
password:
Database:
Connect As.
Although I provide the correct information, the connection is hang for ever. The database instance is up and running.
Jiang.

Performance tuning through OEM

Hi,
I am unable to run performance tuning pack through OEM. Initially when i was not connected with any production database it worked. Now whenever i click performance manager, performance manager over view, etc it simply hangs where as diagnositc packs such as oracle expert are all working. I have increased the java_pool_size to 50M from 24M both in the remote database machine and in server but still i unable to run it through remote database machine. I have configured rman in the remote database and taking fullbackup, logical back up through it but the performance pack hangs whenever i run it. I am new to dba. statstical report collected through statspack report gives no idea for me to tune. Please help me what to do in this regard to tune the database.
What are the vital points one has to tune and how to tune it.

Brain heart,
As you have mentioned that you are new in Tuning so I shall say first is to understand what exactly we are hunting for.Please read Performance Tuning guide frm oracle docs.
You have not mentioned any version for your db so I am assumig 10g.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/toc.htm
Also there is an excellent guide from 9i docs, called Performance Planning also read that one.
And to understand tuning and its various know hows, get these books,
Optimize Oracle Performance--Carry Millsap
Oracle Wait Interface --Richmond Shee
Forecasting Oracle Performance --Craig Shallahamer
These will help you in understanding alot of things which will help for sure.
Aman....

Unable to connect to the database through OEM

Hi,
ORACLE VERSION: 10.2.0.1.0
OPERATING SYSTEM:LINUX
I was unable to connect to my database through OEM.It is showing error like this in my OEM .
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
The below is the list of errors written in the trace file .
2009-07-13 14:55:18,351 [EMUI_14_55_18_/console/aboutApplication] ERROR em.console doGet.311 - java.lang.IllegalStateException: Response has already been committed
java.lang.IllegalStateException: Response has already been committed
     at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1901)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:211)
     at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:773)
     at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:396)
     at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:688)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:291)
     at oracle.sysman.eml.app.Console.doGet(Console.java:135)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:101)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
     at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:123)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:239)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
2009-07-13 14:55:20,893 [HttpRequestHandler-25640626] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:20,925 [HttpRequestHandler-25640626] ERROR eml.OMSHandshake getParameterFromDB.402 - ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:20,926 [HttpRequestHandler-25640626] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://VTL3200DB:3938/emd/main)(ERROR = INTERNAL_ERROR)
2009-07-13 14:55:20,959 [HttpRequestHandler-23946437] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:20,990 [HttpRequestHandler-23946437] ERROR eml.OMSHandshake getParameterFromDB.402 - ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:20,991 [HttpRequestHandler-23946437] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://VTL3200DB:3938/emd/main)(ERROR = INTERNAL_ERROR)
2009-07-13 14:55:42,047 [OmsServiceDriver thread] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:51,030 [HttpRequestHandler-12767107] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:51,062 [HttpRequestHandler-12767107] ERROR eml.OMSHandshake getParameterFromDB.402 - ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:51,063 [HttpRequestHandler-12767107] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://VTL3200DB:3938/emd/main)(ERROR = INTERNAL_ERROR)
2009-07-13 14:55:51,096 [HttpRequestHandler-28346522] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:51,127 [HttpRequestHandler-28346522] ERROR eml.OMSHandshake getParameterFromDB.402 - ORA-01017: invalid username/password; logon denied
2009-07-13 14:55:51,127 [HttpRequestHandler-28346522] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://VTL3200DB:3938/emd/main)(ERROR = INTERNAL_ERROR)
2009-07-13 14:56:21,162 [HttpRequestHandler-32110028] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
2009-07-13 14:56:21,193 [HttpRequestHandler-32110028] ERROR eml.OMSHandshake getParameterFromDB.402 - ORA-01017: invalid username/password; logon denied
2009-07-13 14:56:21,194 [HttpRequestHandler-32110028] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://VTL3200DB:3938/emd/main)(ERROR = INTERNAL_ERROR)
2009-07-13 14:56:21,227 [HttpRequestHandler-12767107] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
2009-07-13 14:56:21,258 [HttpRequestHandler-12767107] ERROR eml.OMSHandshake getParameterFromDB.402 - ORA-01017: invalid username/password; logon denied
2009-07-13 14:56:21,259 [HttpRequestHandler-12767107] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://VTL3200DB:3938/emd/main)(ERROR = INTERNAL_ERROR)

Invalid Connection Pool. ERROR = ORA-01017: invalid username/password; logon denied
Don't say password is correct, if password is correct then tell us what last changes you did. did you change SYSMAN password throught alter user ...identified ... ?
Regards,
Taj

Backup & Recovery through OEM

Similar Messages

Maybe you are looking for