Backup Restoration fails on MSSQL2005(SP2) on windows 2003 IA64 in ECC6.0

Hi ,
           Iam trying to resore backup of my MSSQL2005 server from a Ultrium 3 tape drive but it's getting failed. Iam able to take the backup sucessfully and Iam able to see the content on the tape0 from SQLStudio Manager. When I try to restore the problem coming, OS is 2003 IA64 and SAP is ECC6.0.
Following error occurs on a pop up.
           An exception occured while executing a Transact-SQL statement or batch.
         Additional information.
          Timeout expired. The time out period elapsed prior to completion of the operation or the server is not responding.
            So we have increased the time out with the command SET LOCK_TIMEOUT 3600; but still no use, we are getting the same error.
I have raised a OSS Mesage but the gentlemen expect the error in SQL 2005 Studio Manager, He say's it's not supporting 64 bit OS. So he suggested to install a 32 bit OS and access the 64 bit database. So I have tried the same , I am able to take backup and view the content on tape. When I try to restore it's giving SQL 3201 error. But this error doc. from Microsoft is not giving any exact reason and it's not maching my case.
Thanks &Regards,
Hari.

Dear Hari,
I also faced same problem and till i did not find solution.
To resolve this issue we did the restore through command line option.
If i will get the solution through management studio i will update it here.
Regards,
Nikunj Thaker.

Similar Messages

Backup Restore Failed After iOS5 Upgrade

I did the iOS5 install on my iphone 4 yesterday and it went off perfectly. However, this evening, I did the same on my wife's iphone 4. Prior to doing the download, I did a Backup and a Restore Purchases. When the process came to the Restore point, I received the error message that the restore from backup had failed. Each time we plugged the phone back into itunes, it prompted us to complete the restore process but with the same message. Consequently, my wife's phone lost all contacts, photos, and apps. I manually re-entered her contacts, plugged back into itunes, and performed another backup. We then attempted to restore from backup once again with the failure message following. I'm almost sure that we cannot recover her photos, but if anyone on the forum has a suggestion, we'd appreciate it. Also, what is the safest and most surefire way to backup photos and contacts on the iphone 4 ? JEFF

My husband updated my phone on the 15th... same identical thing happened. I've lost all photos, text messages, and contacts since the las backup. It did download 5.0, but I lost everything. I spent 2.5 hours on the phone with an apple advisor and they needed to research it further and would call me back......hasn't happened yet. If they find a way, I will post it. What error message did you receive... mine was (-50).

Oracle Secure Backup 10.3.0.3.0 in Windows 2003 with IBM Tape Not Working

Hi,
I am currently implementing Oracle Secure Backup. My environment is this:
OS: Windows Server 2003 (32Bit) for all servers
Database: Oracle Database 11.2.0.1.0
Tape Library: IBM-ULT 3580-TD4
I will have to configure 2 machines to work with OSB: server01 and server02.
Server01:
This serves as the client, admin, mediaserver
Server02:
This will serve as the client, admin
When I log in to Server01, in the device manager, I can see the Tape Drives (no warnings, no questions marks) so I think it's good.
When I log in to Server02, in the device manager, there are no Tape Drives seen. Is is ok or shall i configure the IBM Tape drives to be also accessible since this is just the client, admin host?
Also I have noticed that when I installed the OSB in Server02 (client,admin), when I am on the SCSI Devices, i dont see any tape device (since its not in the device manager). Because of this i cannot start OSB Services and cannot add this host to the mediaserver.
Also, I am having issues Configuring the Library and the devices. I have read the official documentation completely but i think its very general and it does not present the detailed step-by-step process in installing and configuring OSB.
When I issued: lsdev -lvg in the mediaserver , I can read an error: Warning: bus info unknown or drive not installed.
Help is very much appreciated. Thanks a lot guys!

I have resolved the issue. Ill close this thread. :))

Cisco CSA Vista Beta - doesn't support sp2 for Windows 2003

I understand that in order for us to run this Beta release of CSA, in can only run under sp1 for Windows 2003 server. SP2 is our current standard
Anyone heard when we can expect it out for SP2?

I can't get it to install on the server comes up with an error what is the trick?

QT failed to initialize error -2096 & Windows 2003 Server

I have seen several posting regarding this, but all are related to ITunes. I have Quicktime 7.4.1 installed on a WTS Server and when I try to run it I get the 2096 error. Since 7.4.1 addresses security issues, reverting to a previous version is not an option. Does anyone know how to get Quicktime 7.4.1 to run on WTS running on a Windows 2003 server? The only other option I will have is to remove Quicktime completely. It worked fine prior to version 7.4. Thanks

( I had the same prob. this worked for me..Good luck...)
1.Quit iTunes.
2. Windows XP and Windows 2000: On the Start menu, click My Computer (or double-click My Computer on the Desktop).
-Windows Vista: On the Start menu, click Computer.
4. In My Computer, open the C:\ drive (or whichever disk your Windows XP is installed on).
5. Open the Program Files folder.
6. Open the iTunes folder.
7. Right-click on the iTunes application (iTunes or iTunes.exe) and from the shortcut menu, click Properties.
8. Click the Compatibility tab.
9. Deselect the checkbox under Compatibility mode if it's selected.
10. Click OK.
11. Open iTunes and play a song.

J2sdk-1_4_2 windows-ia64.exe needed for Windows 2003 ia64 bit ?

hai,
I am installing SAP 4.7 x200 on windows 2003 , Intel 64 bit machine with DB as Ms SQL 2000.
Before Installing SAP i need to have a java runtime environment basically 64 bit for Intel on Windows . I followed SAP note but i am not able to find the exact j2sdk file . I looked at java.sun also and even there i can't locate the file J2sdk-1_4_2 windows-ia64.exe .One can easily find the same file for amd machine.
kindly let me know if there is 64bit version of j2sdk on intel 64 bit.
thanks in advance
jase

HI:
https://sdlc5a.sun.com/ECom/EComActionServlet;jsessionid=1D920D7BB1FC5D31C70E55CE3BE777E4
You will find the link to IA64 towards the bottum of the above page.
If for some reason the page doesn't open, please try the following page:
http://java.sun.com/products/archive/j2se/1.4.2_13/index.html
Thanks!
If this problem has been solved, then go ahead and close this message!
Rewards Points to the helpful answers

Unable to Install jdevstudio11113install.exe on Windows 2003 IA64

Hi there,
I was trying to install jdeveloper 11.1.1.3.0 on ia64 windows 2003, and I kept getting error when installing:
Java Virtual Machine Launcher
Could not create the Java virtual machine.
Is this jdev supported on the machine/OS version?
Thanks!

Have you checked http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html
I guess the problem is that the installer runs on a 32 bit JDK which is not the default on your machine. You can try the jar installer.
Timo

Backup & Restore Fail-over Cluster

i ask for the best practice of backup and restore SQL fail-over cluster with Active-Active solution.

Hi Sir ,
Here is an article regarding baking up and recovering the cluster configuration :
http://blogs.msdn.com/b/clustering/archive/2008/01/20/7176982.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

WCS Backup Restore Failed

Hi Everyone,
I am facing a failed issue when restoring the WCS Database. Below is the error i get, does any one out there facing it before?
[root@egwgwcs WCS7.0.220.0]# ./Restore
Please enter the full path of the backup file name: /opt/WCS7.0.220.0/Backup_File/WCS_Aug2012.nmsbackup
Untaring the backup file...
Failed to untar backup file. Exception: invalid stored block lengths
Restore database failed.
Is there any solution to solve this error?
Thanks
Tay Li Tiong

Hi,
It seems the backup file is corrupted!!!
Sent from Cisco Technical Support iPad App

6680 update - backup/restore fails

Hi,
after updating firmware from 2.x to 4.x with Nokia software, I cannot restore my old backup correctly.
After restore with ContentCopy, the screen does not show the menu entries and the systems settings cannot be called.
Any help appreciated!
Thanks, Oliver

Hey alexamai,
I see that you have an issue with your ability to update and restore your iPhone, and are receiving an error code(3) when attempting to update. Here is an article for you that addresses this issue and that error code, specifically:
Resolve iOS update and restore errors - Apple Support
http://support.apple.com/en-us/TS3694
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Backup restore failed

hi,
please need help. after a firmware update, my phone e61i does not restore the backup from "backup.arc" file. restoring takes about 1sec and phone wants to be restarted, but after that no data has been restored. what should i do, i've lost everything.

My husband updated my phone on the 15th... same identical thing happened. I've lost all photos, text messages, and contacts since the las backup. It did download 5.0, but I lost everything. I spent 2.5 hours on the phone with an apple advisor and they needed to research it further and would call me back......hasn't happened yet. If they find a way, I will post it. What error message did you receive... mine was (-50).

Backup db using expdb/impdb (Oracle 11g Windows 2003)

Hi Guys,
I'm currently doing backups using expdb/impdb due to problems we have with BackupExec when I use RMAN. But what I want to find out is that would you call expdb/impdb a hot or a cold backup? Or should I say what happens when the user is trying to access the database while expdb/impdb is in progress?
Thank you.

expdp is not consider any form of backup. It's just an alternate way to export the data into dump files and import when required. You can not do any sort of recovery with expdp dumps.
depends on number of CPU's you have and number of parallel threads you are using, users may experience spikes in the busy database.
Regards,
-Vijay

Live cache upgrade on Windows 2003, IA64 clustered environment

Hi,
We are currently upgrading the Live Cache from 7.6.03,    BUILD 008-123-159-187 to 7.7.03   BUILD 023-123-174-368.
Note # 508979 is being referred to. The upgrade has completed successfuly on one Node A but is interruopted on Node B. The error log is as follows
INSTALLER_INFO: Version = 7.7.03 Build 023-123-174-368
INSTALLER_INFO: Changelist = 174368
INSTALLER_INFO: MakeId = 285415
INSTALLER_INFO: Type = kit
SYS_INFO: Host name = FMSAP457
SYS_INFO: System = Windows
SYS_INFO: Architecture = IA64
SYS_INFO: Version = NT 5.2
SYS_INFO: Subversion = Service Pack 2
CALL: SDBUPD -INSTANCE -profile APO LiveCache
STDOUT:
     SAP liveCache INSTANCE UPDATE
STDOUT:      *****************************
STDOUT: starting installation We, Oct 08, 2008 at 01:26:46
STDOUT: operating system: Windows IA64 NT 5.2 Service Pack 2
STDOUT: callers working directory: Z:/SCM_51upgradeCD/SCM5.1_SPS6/lca600011_livecache-win-64bit-i386-7_7_03_23
STDOUT: installer directory: Z:/SCM_51upgradeCD/SCM5.1_SPS6/lca600011_livecache-win-64bit-i386-7_7_03_23
MSG: InstallRegistry: space check ok: 16843616 kb on W: (17719292 kb total) available
MSG: install registry successfully locked
MSG: read 16 PACKAGES
MSG: net registry size = 133192 bytes
WRN: InstallRegistry::reserveSpace(): file >= 1024 kb
STDOUT: archive directory: Z:/SCM_51upgradeCD/SCM5.1_SPS6/lca600011_livecache-win-64bit-i386-7_7_03_23
STDOUT:
MSG: debug package SDBBAS.SDB is valid
MSG: debug package SDBKRN.SDB is valid
MSG: debug package SDBUTL.SDB is valid
MSG: no installation data to migrate
STDOUT: beginning to check sap db instances
STDOUT: existing instance:
STDOUT: 0: LCA   "O:/sapdb/LCA/db" 7.6.3.8
STDOUT: 1: none
STDOUT: please enter instance id:
STDIN: 0
STDOUT: please enter database manager operators name:
STDIN: control
STDOUT: please enter database manager operators password: STDOUT:
STDIN:
STDOUT: resume broken instance check
x_server is running
got following x_server data:
version = W64/INTEL 7.6.3    Build 008-123-159-187
dbmsrv uses db_online
dbmsrv uses db_admin
STDOUT: finding instance type...
instance type is LVC
getting catalog encoding...
catalog encoding is UNICODE
STDOUT: finding starting release...
kernel executable is O:\sapdb\LCA\db/pgm/kernel.exe
kernel version by GetBuildString 7.6.3    Build 008-123-159-187
starting release is 7.6.3    Build 008-123-159-187
STDOUT: finding apo starting release...
sapapo lib is O:\sapdb\LCA\db/sap/sapapo.dll
apo version by GetBuildInfo 5.0.0.13
apo starting release is 5.0.0.13
STDOUT: finding migration strategy...
migration is using external livecache consistency
from LVC 7.6.3    Build 008-123-159-187
and APO 5.0.0.13
to   LVC 7.7.03
and APO 6.0.0.011
STDOUT: looking for running instances...
no instances found
db_enum
OK
MSG: writing 16 packages
MSG: net install registry size = 133192 bytes
MSG: wrote install registry (156751 bytes)
STDERR: MaxDB instance "LCA" not ready to update
STDERR: looking for running instances...
no instances found
db_enum
OK
STDERR: SAP liveCache instance update exited abnormally at We, Oct 08, 2008 at 01:28:48
MSG: install registry successfully unlocked
Regards
Abraham

As a SAP customer: please open a support message for this!
regards,
Lars

How to view failed updates on Windows 2003 Server ?

Hello,
Can anyone tell me how I can view what Windows Updates failed and why, on a Windows 2003 server that uses Configuration Manager?
Thanks
Stuart

You won't find the solution in ConfigMgr. It has done it's job and the updates have been delivered. The fact that the updates cannot install is a Windows problem. You need to be looking at the EVENT logs.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Any issues with server 2008R2 being a backup AD when the Primary AD is a 2003 that was upgraded from NT

Someone recently told me if a customer has a Windows 2003 server that originally came from NT which was upgraded to Windows 2000, then upgraded to 2003 as their primary AD, if you add a 2008R2 server as a backup AD, it will upgrade the forest, but there
is an issue with the global catalog not properly replicating to the 2008R2 backup server and thus if the primary Windows 2003 server were to crash the backup 2008R2 server will not be able to authenticate users.
Can you tell me if this is true? It seems rather odd to me that if the 2008R2 is able to become a backup controller without any errors and does not report any AD or replication errors in the event log that it would not work if the primary AD failed.
Thoughts?

This is not true & never heard/seen of anything as such. The AD database either on windows 2003 or 2008 R2 contains similar objects & attributes, but few groups are only created when you transfer PDC role to windows 2008 & above DC esp if you
are using RODC.Also, there is no concept of primary & secondary DC from windows 2000 & above. PDC & BDC concepts existed in windows NT not any more.
The DC with GC role have bit more information because it contains partial information of the objects in other domain too. So, i would be taking backup of the windows 2008 R2 DC. As long as DLF/FFL is not enhanced you can run windows 2003 & 2008 R2 DC
in coexistence.
My suggestion would be transfer FSMO role on the windows 2008 R2 DC becasue may be at some point of time you would get rid of windows 2003 DC to enjoy full features of windows 2008 R2 AD.
Awinish Vishwakarma - MVP
My Blog: awinish.wordpress.com
Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights.

Backup Restoration fails on MSSQL2005(SP2) on windows 2003 IA64 in ECC6.0

Similar Messages

Maybe you are looking for