Backup scheduled through DB13 not working

Hello,
We are trying to schedule backup through DB13.But it got failed due to below error.Backup scheduled through DB13 was working fine last week.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000174, user ID KHJS199)
Execute logical command BRARCHIVE On host ppd-ora-ga2
Parameters:-u / -jid LOG__20100927040000 -c force -p initGA2.sap -sd
External communication error at program start (see system log)
SAPXPG_START_XPG_LONG: sy-subrc ne 0
destination = SAPXPG_DBDEST_PPD-ORA-GA2
SXPG_STEP_XPG_START: execute_sapxpg: rc = 1.003
SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.003
SXPG_COMMAND_EXECUTE(LONG)
<timestamp> = 20101014040033
COMMANDNAME = BRARCHIVE
ADDITIONAL_PARAMETERS =
-u / -jid LOG__20100927040000 -c force -p initGA2.
sap -sd
LONG_PARAMS
OPERATINGSYSTEM = ANYOS
TARGETSYSTEM = ppd-ora-ga2
DESTINATION = SAPXPG_DBDEST_PPD-ORA-GA2
SY-SUBRC = 1003
SXPG_COMMAND_EXECUTE failed for BRARCHIVE - Reason: program_start_error: For More Information, See SYS
Job cancelled after system exception ERROR_MESSAGE
We checked the RFC connection SAPXPG_DBDEST_PPD-ORA-GA2 and it is not working.
For target host and gateway host,we have maintained their corresponding virtual host.
Gateway is already installed on the server.
Could you please help me out on this.
Thanks,
Gopi L

Hello,
Just to add some more information.
We have 3 servers, X(Database + CI),Y(Dialog instance),Z(Dialog Instance).
Server  X is the primary node and Y is the failover node.
Gateway is already installed on Database server and I can verify it by giving ps -aef | grep gwrd.
Thanks,
Gopi L

Similar Messages

  • Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

    Not able to sign into Blackberry Protect.  Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID."  My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone.  I can sign into Link, Blackberry.com and Protect.  I see my device in Protect but cannot send messages or view it on a map.  Times out with cannot reach device message.  BB Protect on Device has a swirling circle beside the on/of switch.  Cannot turn off.  
    I have deleted Link and re-installed.
    I have reset phone to default(factory) and signed in. 
    OS level is 10.2.1.3062
    BB Link is 1.2.3.56
    Solved!
    Go to Solution.

    I managed to figure this out myself. I had to delete the device from the Blackberry Protect website.  protect.blackberry.com.  I wiped my device again and signed in with my Blackberry ID.  I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete.  Restore is in progress for me!

  • Office 2013 C2R Update Scheduled Task does not work

    Hi all.
    I am having difficulty getting network deployed updates to work correctly. I installed and older version of Office 2013 with the ODT from a network share and set the update path. I then downloaded an update via ODT.
    The issue is the scheduled task does not update office. If I trigger or manually run from a command prompt "C:\Program Files\Microsoft Office 15\ClientX64\integratedoffice.exe RUNMODE RERUNMODE modetorun updatedetection modeargs reschedulemode tasktrigger
    scheduledtask updateuitype background” from Task Scheduler nothing seems to happen. Monitoring Task Manager it looks like integratedoffice is called albeit very briefly.
    But, if I run "C:\Program Files\Microsoft Office 15\ClientX64\integratedoffice.exe RUNMODE RERUNMODE modetorun updatedetection background” from a command prompt Office updates, but if I edit the Scheduled Task to above Office does not update if the
    task is triggered.
    As Office can update if the right command is given it would appear that my config.xml etc is correct. Any ideas on why the Scheduled Task does not work?
    Cheers
    Jakes

    What permissions are set on the location of the updates ? C2R currently needs permissions granted for machine accounts as it runs under that context. This will change at some point that C2R gets updated.

  • Offline backup scheduled in DB13 failed

    Hello everybody,
    Whole database offline + redo log backup scheduled in DB13  failed.  We are running SAP on Oracle 10.2.0.2 on HP UX B.11.23
    Here is the portion of log mentioning the error.
    BR0202I Saving /oracle/TU4/sapbackup/.tape.hdr0                                                          
    BR0203I to /dev/rmt/10mn ...                                                                             
    BR0209I Volume in device /dev/rmt/10mn has name TU4B05                                                   
    BR0202I Saving init_ora                                                                               
    BR0203I to /dev/rmt/10mn ...                                                                             
    BR0202I Saving /oracle/TU4/102_64/dbs/initTU4.sap                                                        
    BR0203I to /dev/rmt/10mn ...                                                                             
    BR0280I BRBACKUP time stamp: 2009-02-03 03.00.58                                                         
    BR0198I Profiles saved successfully                                                                      
    BR0280I BRBACKUP time stamp: 2009-02-03 03.00.58                                                         
    BR0307I Shutting down database instance TU4 ...                                                          
    BR0278E Command output of '/oracle/TU4/102_64/bin/sqlplus /nolog < /oracle/TU4/sapbackup/.bdzvnffe.spi': 
    SQL*Plus: Release 10.2.0.2.0 - Production on Tue Feb 3 03:00:58 2009                                     
    Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.                                                  
    SQL> Connected.                                                                               
    SQL>                                                                               
    SQL> ORA-01013: user requested cancel of current operation                                               
    SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production      
    With the Partitioning and Data Mining options                                                            
    BR0280I BRBACKUP time stamp: 2009-02-03 04.01.04                                                         
    BR0279E Return code from '/oracle/TU4/102_64/bin/sqlplus /nolog < /oracle/TU4/sapbackup/.bdzvnffe.spi': 0
    BR0302E SQLPLUS call for database instance TU4 failed                                                    
    BR0309E Shutdown of database instance TU4 failed                                                         
    BR0056I End of database backup: bdzvnffe.aft 2009-02-03 04.01.04                                         
    BR0280I BRBACKUP time stamp: 2009-02-03 04.01.05                                                         
    BR0054I BRBACKUP terminated with errors                                                                  
    Any input will be highly appreciated.
    Regards
    Santanu

    Hi
    Are u taking the offline backup on disk or tape. Your log seems to be mentioning it to be on tape. Anyways, have you set the /oracle/SID/102_64/dbs/initSID.sap file parameters accordingly. Also the log says that there has been a user intervention to stop the backup. Did you press Cntrl C in the process. Offline backups to tape is a bit tricky aand even we are fighting on this. I would suggest taking it on disk and then transferring it to tape.
    Lokesh

  • SAP ECC6.0 on SQL BACKUP ISSUE THROUGH DB13

    Dear All,
    My SAP Environment is : Windows Server 2003
    Database : SQL2005
    SAP version: ECC6.0 SR3
    I am in process to configure backup system of Development server through DB13 but i am getting the below error : -
    Jobname:    SAP CCMS Full DB Backup of DEV [20090618113720-4-113720]
    Type:       TSQL
    DB-Name:    DEV
    For Run:    20090618  11:37:20
    Job history information  *****************************
    Stepname:   CCMS-step 1
    Command:    declare @exeStmt nvarchar(2000) exec dev.sap_backup_databases @dbList=
                "DEV",@r3Db="DEV",@bDev="R3DUMP0",@expDays= 27,@jobName= "SAP CCMS Ful
                l DB Backup of DEV [20090618113720-4-113720]",@bkupChecksum="N",@bkupT
                ype="F",@nativeBkup="N",@exeDate = "20090618113720",@bkupSim = "N",@fo
                rmat = 0,@init = 1,@bkupDb = "DEV",@unload = 0,@exeStmt = @exeStmt OUT
                PUT
    Status:     (failure)
    Message:    2528
    Severity:                                                                                16
    Duration:   0  hours(s)  0  min(s) 1  sec(s)
    Last msg:   Executed as user: NT AUTHORITY\SYSTEM. Mount tape for BACKUP DATABASE
                of database 'DEV' on tape drive '
    .\tape0'. [SQLSTATE 42000] (Error 4
                027)  DBCC execution completed. If DBCC printed error messages, contac
                t your system administrator. [SQLSTATE 01000] (Error 2528).  The step
                failed.
                        <----
    End of Job Step History -
    >
    Job history information  *****************************
    but i am able to take backup on tape through SQL Server management studio.
    Do we have to do some steps before scheduling backup through DB13 ?
    Please suggest.
    Regards,
    Rohit

    Hi Markus,
    Thanks for reply.
    No i have not provide any speacial permission to user SAPServiceDEV by default this user is member of : SAP_DEV_GlobalAdmin , SAP_DEV_LocalAdmin , SAP_LocalAdmin , User group.
    Which permission i have to assign to this user?
    kindly suggest.
    Thanks in advance.
    Rohit

  • Brbackup from DB13 not working

    Dear experts,
    For the past one week suddenly my Offline backup from DB13 has stopped  working. I havent change anything on my SAP server or Oracle but its not working.
    First I checked DB13 logs. Last messages it is giving me is like as follows
    =====================================================
    BR148I DBVERIFY will be used for verification                                  
    BR134I Unattended mode with 'force' active - no operator confirmation allowed  
    BR370I Directory /oracle/CYP/sapbackup/bdvklqkj created                        
    BR202I Saving init_ora                                                         
    BR203I to /oracle/CYP/sapbackup/CYP ...                                        
    BR202I Saving /oracle/CYP/920_64/dbs/initCYP.sap                               
    BR203I to /oracle/CYP/sapbackup/CYP ...                                        
    BR280I Time stamp 2007-06-05 03.00.07                                          
    BR198I Profiles saved successfully                                             
    BR280I Time stamp 2007-06-05 03.00.07                                          
    BR307I Shutting down database instance CYP ...    
    =============================================
    when I checked my previous DB13 successful logs I saw that next message is
    Shutdown of database instance CYP successful
    Obviously it gave me idea that might be database was not closing out successfully. then I checked and compared my oracle alert logs but havent found  very obvious changes their. Please check below messages of alert log. First set of messages are of successful backup and next set is of my recently failed backup
    ===================================================                             
    ALTER DATABASE CLOSE NORMAL
    Wed May  9 01:00:59 2007
    SMON: disabling tx recovery
    SMON: disabling cache recovery
    Wed May  9 01:00:59 2007
    Shutting down archive processes
    Archiving is disabled
    Wed May  9 01:00:59 2007
    ARCH shutting down
    Wed May  9 01:00:59 2007
    ARCH shutting down
    Wed May  9 01:00:59 2007
    ARC0: Archival stopped
    Wed May  9 01:00:59 2007
    ARC1: Archival stopped
    Wed May  9 01:01:00 2007
    Thread 1 closed at log sequence 2209
    Successful close of redo thread 1
    Wed May  9 01:01:00 2007
    Completed: ALTER DATABASE CLOSE NORMAL
    Wed May  9 01:01:00 2007
    ALTER DATABASE DISMOUNT
    Completed: ALTER DATABASE DISMOUNT
    ARCH: Archiving is disabled
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    ARCH: Archiving is disabled
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    ALTER DATABASE CLOSE NORMAL
    Tue Jun  5 03:00:42 2007
    SMON: disabling tx recovery
    SMON: disabling cache recovery
    Tue Jun  5 03:00:43 2007
    Shutting down archive processes
    Archiving is disabled
    Tue Jun  5 03:00:43 2007
    ARCH shutting down
    Tue Jun  5 03:00:43 2007
    ARCH shutting down
    ARC1: Archival stopped
    Tue Jun  5 03:00:43 2007
    ARC0: Archival stopped
    Tue Jun  5 03:00:43 2007
    Thread 1 closed at log sequence 2254
    Successful close of redo thread 1
    Tue Jun  5 03:00:43 2007
    Completed: ALTER DATABASE CLOSE NORMAL
    Tue Jun  5 03:00:43 2007
    ALTER DATABASE DISMOUNT
    Completed: ALTER DATABASE DISMOUNT
    ARCH: Archiving is disabled
    Shutting down archive processes
    Archiving is disabled
    Archive process shutdown avoided: 0 active
    ======================================================
    I used to schedule backup at 3 AM but when I came to office next morning my oracle instacne was in idle mode. I checked ps -ef OS command and saw process of brbackup was still there and not a single byte had been taken as backup.
    Please help me if  you have any clue.
    Best Regards
    Waqas

    which log do you want
    backCYP.log
    or
    bdvklqkj.afd log ( this is same is db13 logs)
    backCYP.log is showing following
    =======================================
    bdvfimya afd  2007-05-09 01.00.48  2007-05-09 01.57.18  1  ...............     2
    5    25     0      2209       2028063485     2209       2028063485  ALL
    offline_force   disk             -
    c 6.20 (113)
    bdvjrtwh afd  2007-06-01 02.00.23  0000-00-00 00.00.00  6  ...............     2
    5     0     0      2248       2104067221        0                0  ALL
    offline_force   disk             -
    c 6.20 (113)
    bdvklqkj afd  2007-06-05 03.00.05  0000-00-00 00.00.00  6  ...............     2
    5     0     0      2254       2114123006        0                0  ALL
    offline_force   disk             -
    dc 6.20 (113)
    ===================================
    Regards

  • Online backup fail through DB13

    Dear experts,
    I am using sap BW 7.4 under oracle 11.0.2.4
    I am trying to take online backup on disk
    I select action whole database online backup + redo file backup as will as
    Full database online backup and BRACHIVE function is -sd
    but  backup was failed I am unable to resolve it  following are logs generated during backup
    #SAVED.... /oracle/online/beokvzrl/system.data1  #1/17
    BR0280I BRBACKUP time stamp: 2014-08-02 10:58:20
    BR0063I 17 of 17 files processed - 51610.133 of 51610.133 MB done
    BR0204I Percentage done: 100.00%, estimated end time: 10:58
    BR0001I **************************************************
    BR0280I BRBACKUP time stamp: 2014-08-02 10:58:20
    BR0317I 'Alter tablespace SYSTEM end backup' successful
    BR0252W Function kill() failed for '17891582:15' at location BrKill-3
    BR0253W errno 3: No such process
    BR0278I Command output of '/usr/sap/BWD/SYS/exe/run/brconnect':
    BR0801I BRCONNECT 7.40 (6)
    PID=17891582
    BR0252E Function fopen() failed for '/oracle/BWD/sapbackup/.user.pas' at location global_set-1
    BR0253E errno 13: Permission denied
    BR0074W BRCONNECT call failed
    BR0280I BRBACKUP time stamp: 2014-08-02 10:58:22
    BR0530I Cataloging backups of all database files...
    BR0278E Command output of 'SHELL=/bin/sh /oracle/BWD/112_64/bin/rman nocatalog':
    Recovery Manager: Release 11.2.0.4.0 - Production on Sat Aug 2 10:58:23 2014
    Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
    RMAN>
    RMAN> connect target *
    connected to target database: BWD (DBID=2340275772)
    using target database control file instead of recovery catalog
    RMAN> **end-of-file**
    RMAN>
    host command complete
    RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19>
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of catalog command on default channel at 08/02/2014 10:58:25
    ORA-19564: error occurred writing 8192 bytes at block number 1
    ORA-27091: unable to queue I/O
    ORA-27041: unable to open file
    IBM AIX RISC System/6000 Error: 13: Permission denied
    Additional information: 3
    Additional information: 4
    Additional information: 4194434
    RMAN>
    Recovery Manager complete.
    BR0280I BRBACKUP time stamp: 2014-08-02 10:58:25
    BR0279E Return code from 'SHELL=/bin/sh /oracle/BWD/112_64/bin/rman nocatalog': 1
    BR0536E RMAN call for database instance BWD failed
    BR0200I BR_TRACE: location BrRmanCall-56, commands for RMAN in: /oracle/BWD/sapbackup/.beokvzrl.cmd
    @/oracle/BWD/sapbackup/..beokvzrl..cmd
    host '/usr/sap/BWD/SYS/exe/run/brtools -f delete /oracle/BWD/sapbackup/..beokvzrl..cmd';
    catalog datafilecopy
    '/oracle/online/beokvzrl/sr3.data1',
    '/oracle/online/beokvzrl/sr3.data2',
    '/oracle/online/beokvzrl/sr3.data3',
    '/oracle/online/beokvzrl/sr3.data4',
    '/oracle/online/beokvzrl/sr3.data5',
    '/oracle/online/beokvzrl/sr3.data6',
    '/oracle/online/beokvzrl/sr3740.data1',
    '/oracle/online/beokvzrl/sr3740.data2',
    '/oracle/online/beokvzrl/sr3740.data3',
    '/oracle/online/beokvzrl/sr3740.data4',
    '/oracle/online/beokvzrl/sr3740.data5',
    '/oracle/online/beokvzrl/sr3740x.data1',
    '/oracle/online/beokvzrl/sr3740x.data2',
    '/oracle/online/beokvzrl/sr3usr.data1',
    '/oracle/online/beokvzrl/undo.data1',
    '/oracle/online/beokvzrl/sysaux.data1',
    '/oracle/online/beokvzrl/system.data1'
    level 0 tag beokvzrl;
    exit;
    BR0280I BRBACKUP time stamp: 2014-08-02 10:58:25
    BR0532E Cataloging backups of all database files failed
    BR0056I End of database backup: beokvzrl.fnd 2014-08-02 10:58:25
    BR0280I BRBACKUP time stamp: 2014-08-02 10:58:25
    BR0054I BRBACKUP terminated with errors
    BR0280I BRBACKUP time stamp: 2014-08-02 10:58:25
    I am unable to understand why RMAN is use ?
    and what parameters are used when I will take backup on tape
    Kindly guide me
    Regards

    Dear Srivastava for your reply,
    I download latest brtools patch and apply it and change authorization  profile parameters is also OK ( I run whole database online backup from brtools using same profile it done successfully )
    full permission ( 777) in sapbackup folder and sub folder but through db13 backup is successfully with warning
    BR0204I Percentage done: 100.00%, estimated end time: 11:57
    BR0001I **************************************************
    BR0252W Function kill() failed for '10420324:15' at location BrKill-3
    BR0253W errno 3: No such process
    BR0278I Command output of '/usr/sap/BWD/SYS/exe/run/brconnect':
    BR0801I BRCONNECT 7.40 (10)
    PID=10420324
    BR0252E Function fopen() failed for '/oracle/BWD/sapbackup/.user.pas' at location global_set-1
    BR0253E errno 13: Permission denied
    BR0074W BRCONNECT call failed
    BR0280I BRBACKUP time stamp: 2014-08-04 11:57:59
    BR0340I Switching to the next online redolog file for database instance BWD ...
    BR0321I Switch to the next online redolog file for database instance BWD successful
    BR0117I ARCHIVE LOG LIST after backup for database instance BWD
    Parameter                      Value
    Database log mode              Archive Mode
    Automatic archival             Enabled
    Archive destination            /oracle/BWD/oraarch/BWDarch
    Archive format                 %t_%s_%r.dbf
    Oldest online log sequence     838
    Next log sequence to archive   841
    Current log sequence           841              SCN: 28074154
    Database block size            8192             Thread: 1
    Current system change number   28074155         ResetId: 842452156
    BR0202I Saving space_log
    BR0203I to /oracle/bck/online/BWD ...
    BR0202I Saving /oracle/BWD/sapbackup/beolgapq.and
    BR0203I to /oracle/bck/online/BWD ...
    BR0202I Saving /oracle/BWD/sapbackup/backBWD.log
    BR0203I to /oracle/bck/online/BWD ...
    BR0056I End of database backup: beolgapq.and 2014-08-04 11:58:01
    BR0280I BRBACKUP time stamp: 2014-08-04 11:58:01
    BR0053I BRBACKUP completed successfully with warnings or non-fatal errors
    1. BR0252W Function kill() failed for '10420324:15' at location BrKill-3
        BR0253W errno 3: No such process
    2. BR0252E Function fopen() failed for '/oracle/BWD/sapbackup/.user.pas' at location  global_set-1
    BR0253E errno 13: Permission denied
    BR0074W BRCONNECT call failed
    why it backup not open file .user.pas ( it is not exist in this folder )
    Kindly guide me
    Regards

  • Logrotion and Backup schedule job does'nt work?

    Hi,
    I have schedule the Syslog Logrotation and CiscoWorks backup jobs to run weekly via LMS, but they are not working. BUT I can manually do the log rotation as well as Backups via LMS.
    I am using LMS:3.2; RME:4.3.0
    Thanks

    You don't see any other issues?
    Maybe post a pdshow -brief
    I would say the jrm is responsible for lauching these jobs, post the jrm.log
    Do you see any errors in the dbbackup.log at the time the jobs are scheduled? If so, post  it.
    Not sure if it requires the task scheduler services to run. You may want to check if it is on.
    Cheers,
    Michel

  • Time Machine backup behavior erratic, now not working at all

    [ Using Lion 10.7.2 on a Macbook Pro 15" with 2.53GHz Intel Core 2 Duo processor, 4GB RAM. ]
    The Macbook is connected to our home LAN, and I have been using (since September) a Synology NAS drive on the network which is set up as the Time Machine backup drive. Most of the time for these past months it has been fine; some issues initially with connectivity which were finally solved by using a static IP address for the NAS.
    Recently it did the first strange thing. It had been performing incremental backups as normal, when a message came up saying the backup was unreliable and it needed to carry out a complete new backup. Anyway - no drama - I took it up and plugged it into the router to speed up the transfer (around 200GB on the drive). It worked fine and thereafter it went back to doing incremental backups normally.
    Yesterday morning I noticed it was apparently running and running without progress, clicking on the bar icon revealed that TM was "Preparing Backup"; this state continued for several hours. So I stopped the backup, restarted the machine, and then last night at 22h00 I restarted it - by 08h00 this morning, ten hours later, it was still "Preparing Backup", so clearly something is wrong.
    The NAS drive is accessible, ie.
    - The 'Time Machine Backups' icon for the drive has appeared on the desktop
    ' The 'Diskstation (Time Machine)' is available in Finder under 'shared'
    So this seems to be something to with Lion and/or with Time Machine.
    Considering the infrastructure environment has been stable for months, the IP address of the drive is static, there appear to be no network connectivity problems... I am at a loss as to why now this irritating behaviour and, more to the point, at the moment I cannot make the Mac backup. I would be happy to do another full backup but, really, should not be necessary since this only happened (due to the recently problem) a few weeks back - and anyway what's the point of automated incremental backup if (a) it doesn't work reliably and (b) every 2-3 weeks you have to manually perform a full backup anyway??!!
    Thanks in advance
    Alastair

    Alastair Mac wrote:
    thanks. unfortunately a locally attached drive isn't a option that will work well for me (too long to explain, but it just won't - personal logistics rather than technology issues).
    Are you sure about that? I have a Time Capsule (2nd hand) but I've switched back to a locally attached disk with Lion. Lion's new mobile backups provide some measure of backups when not connected to the backup drive. It protects against accidental deletions, but not hardware failure. Plus, the new bootable recovery partition in Time Machine and encryption tip the balance back in favor of the local drive - for me at least.
    1. does it make sense to you that, until yesterday, it was working fine and then quite suddenly it stopped working?
    I will say that it isn't surprising. There are some changes in Lion that affect networked Time Machine devices. The early versions of Lion got pretty annoying. 10.7.2 seemed to be better. I had to erase my Time Machine drive a couple of times and do new backups when it decided it needed to keep rebuilding the Spotlight index. Unless you connect with Ethernet, the reindexing will never finish. In your case, I would expect a 3rd party, flaky open-source product to perform even worse.
    2. in my specific situation (going around and around "preparing backup" without any progress even in 24hrs of preparing, what can i do to restart the backup process? even if it means doing a clean backup i.e. junking the old one, i would live with it as at present (touch wood) my hard drive is OK and i have no historical version recovery issues.
    With Time Machine, the only quick and easy way to reset things is to erase the Time Machine volume.
    3. did apple / synology reach a point in previous releases of OSX and DSM which was stable and DID work, despite the need to use Netatalk? in other words, if i soldier on patiently, is it likely this will eventually get solved? or will this be a perennial problem? in the end, if twice a year i have to intervene, it doesn't really matter PROVIDED the backup itself is intact should the HD finally die. of course, if i have to intervene every couple of days, i may as well do it all manually.
    I can't really answer that. I used Netatalk briefly several years ago and it scrambled my files. It has certainly improved somewhat, but obviously isn't stable. The part that really annoys me is that the change that Apple introduced in Lion wasn't really new. Apple introduced a more secure version of the AFP protocol 9 years ago. In Lion, all they did was make that more secure protocol the default and disabled the older protocols. There are a number of hacks that have been posted (sometimes by me) about how to set a flag in Lion so that it will continue to use the older protocol.
    Synology seems to have better Mac support that some NAS vendors. Still, there was no reason they had to wait so long to update their software. Developers have had access to Lion for almost a whole year.
    I would expect that companies would be always trying to improve their products, but the evidence doesn't support that assumption. I don't like Netatalk's shady open source extortion practices, but then no one else has stepped up to fund a stable open-source implementation of AppleTalk. People tend to blame Apple but they published the new specifications a decade ago and no one bothered to read them. Why should they care?
    Personally, I think backups are too important to rely on such flaky software. I really like Time Machine but it is pretty complicated. Apple is able to make it functional over a network, but just barely. If you are using a 3rd party NAS, my suggestion would be to use NFS instead and backup with Carbon Copy Cloner or SuperDuper!. Even if you want to continue to try using Time Machine, a Carbon Copy Cloner backup would be a good thing to have too.

  • Backup Error through db13

    Dear Experts,
    We are taking backup through db13 ECC Deve Server but getting following error--
    Job started
    Step 001 started (program RSDBAJOB, variant &0000000000029, user ID BASIS)
    Execute logical command BRBACKUP On host sapeccdev
    Parameters:-u / -jid TAPIN20091130155408 -i force -c force -n 1 -v SCRATCH
    BR0051I BRBACKUP 7.00 (32)
    BR0055I Start of database backup: becaipbs.tib 2009-11-30 15.54.08
    BR0484I BRBACKUP log file: /oracle/DEV/sapbackup/becaipbs.tib
    BR0280I BRBACKUP time stamp: 2009-11-30 15.54.09
    BR0301W SQL error -27140 at location BrDbConnect-2, SQL statement:
    'CONNECT /'
    ORA-27140: attach to post/wait facility failed
    BR0310W Connect to database instance DEV failed
    BR0205I Backup volume initialization
    BR0058I BRBACKUP action ID: becaipbs
    BR0059I BRBACKUP function ID: tib
    BR0102I Following backup device will be used: /dev/rmt/2mn
    BR0131I All volumes get the name SCRATCH
    BR0129I Force option set - no label checking during initialization
    BR0134I Unattended mode with 'force' active - no operator confirmation allowed
    BR0207I Volume in device: /dev/rmt/2mn will be initialized with name: SCRATCH
    BR0280I BRBACKUP time stamp: 2009-11-30 15.54.09
    BR0226I Rewinding tape volume in device /dev/rmt/2m ...
    BR0202I Copying /oracle/DEV/sapbackup/.tape.hdr0
    BR0203I to /dev/rmt/2mn ...
    BR0209I Volume in device /dev/rmt/2mn has name SCRATCH
    BR0280I BRBACKUP time stamp: 2009-11-30 15.54.16
    BR0226I Rewinding tape volume in device /dev/rmt/2m ...
    BR0280I BRBACKUP time stamp: 2009-11-30 15.54.18
    BR0301E SQL error -27140 at location BrDbConnect-2, SQL statement:
    'CONNECT /'
    ORA-27140: attach to post/wait facility failed
    BR0310E Connect to database instance DEV failed
    BR0206I End of backup volume initialization
    BR0280I BRBACKUP time stamp: 2009-11-30 15.54.18
    BR0054I BRBACKUP terminated with errors
    External program terminated with exit code 3
    BRBACKUP returned error status E
    Job finished
    Kindly revert with helful suggestion.
    Regards,
    Ajit

    Dear Markus,
    after the relink all, this is the following log----
    Job started
    Step 001 started (program RSDBAJOB, variant &0000000000005, user ID BASIS)
    Execute logical command BRBACKUP On host qserv
    Parameters:-u / -jid TAPIN20091130174249 -i force -c force -n 1 -v SCRATCH
    BR0051I BRBACKUP 7.00 (32)
    BR0055I Start of database backup: becaiysn.tib 2009-11-30 17.42.49
    BR0484I BRBACKUP log file: /oracle/QAS/sapbackup/becaiysn.tib
    BR0477I Oracle pfile /oracle/QAS/102_64/dbs/initQAS.ora created from spfile /oracle/QAS/102_64/dbs/spfileQAS.ora
    BR0205I Backup volume initialization
    BR0058I BRBACKUP action ID: becaiysn
    BR0059I BRBACKUP function ID: tib
    BR0102I Following backup device will be used: /dev/rmt/2mn
    BR0131I All volumes get the name SCRATCH
    BR0129I Force option set - no label checking during initialization
    BR0134I Unattended mode with 'force' active - no operator confirmation allowed
    BR0207I Volume in device: /dev/rmt/2mn will be initialized with name: SCRATCH
    BR0280I BRBACKUP time stamp: 2009-11-30 17.42.49
    BR0226I Rewinding tape volume in device /dev/rmt/2m ...
    BR0278E Command output of 'LANG=C mt -f /dev/rmt/2m rew':
    /dev/rmt/2m: No such device or address
    BR0280I BRBACKUP time stamp: 2009-11-30 17.42.50
    BR0279E Return code from 'LANG=C mt -f /dev/rmt/2m rew': 1
    BR0213E Winding tape volume in device /dev/rmt/2mn failed
    BR0219E Initialization of volume SCRATCH in device /dev/rmt/2mn failed
    BR0206I End of backup volume initialization
    BR0280I BRBACKUP time stamp: 2009-11-30 17.42.50
    BR0054I BRBACKUP terminated with errors
    External program terminated with exit code 3
    BRBACKUP returned error status E
    Job finished
    Regards,
    Ajit

  • Trying to do 6.3 raw update for CS5 through Bridge not working

    Been trying to update 6.3 raw for CS5 through Bridge and a pop up window says I am not the administrator for my computer.  I sign in as the admin still does not work.  I have tried installing in manual mode no luck either.

    If you are working on Windows OS, then try to run the patch executable in Admin mode using "RunAsAdministrator" option in the right click context menu.

  • Backup and restore buttons not working

    Hi,
    Any button in my backup and restore centre with a shield next to it (for UAC) is not working. Identical to this thread:
    https://social.technet.microsoft.com/Forums/windows/en-US/6a138e65-2834-41ac-bd40-c2344e20b824/backup-and-restore-panel-buttons-not-working
    A fair way down that page, Lokesh replies but I don't have any of the software that he mentions in his post. Is anyone able to help?

    Hi,
    According to the Lokesh's reply, this problem is probably caused by 3rd plugin in Windows Explorer Shell. UAC dialog couldn't be prompt correctly.
    To resolve this problem, you can try to use ShellExViewer instead to make troubleshoot, please follow the content of the link below for more details:
    https://social.technet.microsoft.com/Forums/windows/en-US/5353106e-5b19-4a26-8446-72bedf40b169/rightclick-context-menu-in-desktop-appearing-slow-win-81?forum=w8itprogeneral
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Backup external hard drive not working in 8.1

    Updated to 8.1 and now my Iomega external hard drive (for weekly backup) is now not working. It shows up in the 'devices' but then backup will not recognise it as a valid option to continue my backup. Suggestions please?
    This question was solved.
    View Solution.

    Hi UKPOL,
    Please refer to this How to Geek article.
    Win 8.1 no longer supports a graphical interface for backing up files or creating system images. You must use powershell or Win 8.1's reset/refresh options.
    You can also create custom refresh images. Please see this article. The instructions also work with Win 8.1.
    You would have to use third party backup software for backing up files and folders.
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++
    H8 1380t CTO, Intel i7 3820
    16 GB DDR3
    Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
    Envy Phoenix 810-150se, Intel i7 4820k
    12 GB DDR3
    Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
    HP 560z CTO AMD Phenom II X6 1090T
    16 GB DDR3.
    Radeon HD 6570
    Win 7 Home Premium upgraded to Win 7 Pro.
    HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
    12 GB DDR3
    Nvidia Graphics
    Win 8 Pro
    Errare humanum est.

  • Invoicing party display made through OMRMB not working

    Dear Experts,
    We have made the field RBKP-LIFNR invoicing party display only through OMRMB, but it is not working when you running MIRO.
    The field is still input only and the invoicing party can be changed at MIRO, what could be reason of not working.
    Client wants that field to be display only in MIRO.
    rgds

    is there any way if I can attach or modify one existing screen variant to standard transaction miro...since I do not want to change the tcode, this I have asked since omrmb is not working so only transaction variant is the way..
    Kindly suggest.
    rgds

  • Drill Through does not work if clicked from email attachment

    Hello,
    Drill through when clicked from the report attached in the email, takes me to the home folder in the Report Server. That's the <URL Root> setup in the Reporting Services. I checked the solutions, but those don't work for me. One of them said to use
    'Go To URL' in the 'Action' property of the text box, but JavaScript is not recognized when I tried to enter '="javascript:void(window.open('http://.........."  Please help.
    Thanks,
    jkrish

    Hi jkrish,
    Based on your description, are experiencing the issue when you  click in the report which will  link you to the home folder of the Report Server and the report was attached to an email, You adding the URL like this: ="javascript:void(window.open('http://..........”)" 
    which doesn’t work in the email’s report, right?
    I have tested on my local environment and can reproduce your problem in the email’s report, but it is fine in the report server ,the problem due to the JavaScript protocol can work only with an exact page. So, when you try to open an blank page to enter
    the URL it will not work.
    You can find more details steps to check the issue:
    Open a blank Internet Explorer, type the following URL in the address box:
    javascript:void(window.open('http://www.microsoft.com', '_blank'))
    The URL can’t work fine.
    Open a page such as :www.microsoft.com, and then replace the URL with the following URL:
    javascript:void(window.open('http://www.microsoft.com', '_blank')
    At this time, the Internet Explorer will open the home page of Microsoft.com in a new window. It means we can use the URL in Reporting Service well but can’t work in the email attached report.
    If your SQL Server version is 2008 R2 or Higher you can Using this expressions in the “GO To URL”:
    Expression: =IIF(Globals!RenderFormat.IsInteractive = true, "javascript:void(window.open('http://www.microsoft.com', '_blank'))", "http://www.microsoft.com")
    This mean if you run the report in Report Server and click the link, you will open the URL using : "javascript:void(window.open('http://www.microsoft.com', '_blank'))",otherwise it will using this URL: "http://www.microsoft.com")
    If the version is lower than 2008 R2 and will not support the “RenderFormat.IsInteractive = ”, you can add directly the URL (Example:=”Http://<ServerName>/ReportServer” ) in the “Go To URL” to make it work fine in the email attached report.
    Similar thread for your reference:
    SSRS 2005 Jump to URL javascript:void window.open fails in
    Excel 2003
    If you still have any question, please feel free to ask.
    Regards
    Vicky Liu

Maybe you are looking for

  • IPhone 6 unable to login to iCloud

    I made a mistake that has cost me a lot of time and research without much success in finding a solution. Here's what I did and the problem I can't seem to get around. I am on iPhone 6 iOS 8.0.2, 128GB storage with 100GB available (haven't moved photo

  • Problem in Refurbishment processing while doing GR.

    Dear experts, I'm working on refurbishment processing. I have done all the steps as below: I have a material for equipment for which I have 3 valuation types: C1 - New items C2 - Repaired Items C3 - Damaged Items. 1. Equipment creation with serial nu

  • Func module to convert list to pdf without using memory id

    hi Experts, Is there any funct module to convert list to pdf without using memory, as I am using Convert_to_PDF func module which outputs last page only  when its running in Background. But my req is to output all the Pages in the PDF format. Sample

  • Broken iPad Screen

    I dropped my iPad 2 and the screen is broken. The touch still works normally but the glass is cracked. Will the apple warranty cover this for free and if not how much would a repair or screen replacement cost?

  • Watch apple tv and play music on macbook

    Is it possible to play music on my macbook whilst someone else is watching a movie on appletv streamed from the macbook. If I enable both speakers I can listen to the music on my mac and it plays over the movie on apple tv!?