Backup server desinging or deployment

Hello guys,
I have 1 backup & symantec mangement server in 2 different sites with 4 nics each (2 for management & 2 for backup traffic diferent Vlan
Since this is fresh installation, in backup server we have configured 2 subnets192.168.1.x(internet) and 192.168.2.x.(backup) and added in the routing table to direct backup traffic to 192.168.2.x. for backup as we cannot keep 2 gateway in 1 server.
Since, i have not set gateway for 192.168.2.x, we are not able to contact backup server from remote site.
But, it works when i set the gateway, which i should not be doing.
Any help would be appreciated.
ndraj

Hi,
A computer should never have two default gateways. According to your description, I'm not quite sure about your network toppology.
As what I understood, the server connect to both 192.168.1.x and 192.168.2.x, then subnet 192.168.2.x should be reachable even if you do nothing on routing table.
If you add routing entry via "route add ...", it doesn't mean you have two default gateway. Only specific network will be send via this specific interface. In this situation, your provisioning should be correct.
Hope this helps.

Similar Messages

License for backup server

Hi all,
I'm planning to deploy a server for my company and one of the services I'd like to activate is the Mail server.
I know how important it is to have a server always online, so I was thinking of adding a backup server as well.
Do I have to buy a new Mac OS X Server license for the backup server? I currently have an Unlimited license DVD.
Thanks
Nick

yes, licensing is per server.
if you're going to virtualize one of the servers, i believe apple allows that now, though you may still need unique licenses.
check details here: http://www.apple.com/legal/sla/

Backup Server Configuration Questions

I have a super little setup for our small business consisting of 1 primary mac mini server, 1 backup mini server, 2 WD 2TB external firewire drives, and a rackmounted Cisco switch and UPS. AFP, VPN, FTP, expandable storage, time machine backups and managed mobile accounts all packed into a compact, quiet server cabinet that fits under a desk for less than $2000. Unfortunately the success of this little gem has made it more and more critical to our publishing workflow.
For good measure I picked up another mac mini thinking i could set it up as an OD replica backup server. Unfortunately I didn't think this through before the purchase and now I have a what amounts to $500 brick in my server cabinet. Would appreciate some guidance on how best to deploy this backup server.
1) For the backup server to be of any real use I assume its going to need access to the data drives. Is there any way to manage this with external drives? Somebody suggested I should just plug my external drives into both servers, however I did some other reading that suggested this could turn my drives into toasters. I then thought of setting up WD NAS drives through my cabinet switch but was told that NAS and AFP don't play well and I would have the same issue - two systems trying to access the filesystems at the same time.
2) If i can resolve the first issue, I have the backup setup as an OD replica, which theoretically should take over if the primary goes down. Do I also need to setup DHCP on the backup for this to be relevant? Should that range be the same as the primary or do they need to be distinct?
3) I have the 2TB primary drive firewired to the primary server with the 2TB time machine drive daisy chained. I was recommended to use Syncronize Pro for my backup between the drives but despite the warnings on time machine's applicability in a server setup (timing not configurable, CPU overhead) its been perfect for my needs with zero CPU overhead after the first sync. My only complaint is time machine doesn't work with ARD so you have to browse the time machine directory manually.
4) Am I missing a larger plot here? Can I setup the external drives or backup server in another way to be more efficient. Should I pickup another set of drives and somehow synchronize the primary and secondary server completely??
This is my first server config and has been a fun little project except for a nightmare of a time with the VPN but that's another story.
Any help apprecaited.

For the backup server to be of any real use I assume its going to need access to the data drives. Is there any way to manage this with external drives? Somebody suggested I should just plug my external drives into both servers, however I did some other reading that suggested this could turn my drives into toasters.
You're right - You cannot connect one FireWire drive to two systems and hope it will work. That is asking for trouble right there.
I then thought of setting up WD NAS drives through my cabinet switch but was told that NAS and AFP don't play well and I would have the same issue - two systems trying to access the filesystems at the same time.
The whole point of NAS is that the NAS controller (in conjunction with the access protocol (e.g. AFP, NFS, etc.) takes care of concurrent access.
However, all of the above depends on the data you're storing on the external/shared drives. For example, don't expect to store any database-based data such as Open Directory to be shared between machines via the shared drives. Any shared drive setup should be for static files only (e.g. users home directories would be OK, as would backups, web content, etc.).
I have the backup setup as an OD replica, which theoretically should take over if the primary goes down. Do I also need to setup DHCP on the backup for this to be relevant? Should that range be the same as the primary or do they need to be distinct?
That depends on what you're trying to protect against.
If you're planning to keep critical services running in case the primary server fails then you can probably eschew DHCP altogether - existing clients will retain their DHCP address for at least half the lease period. e.g. if your lease is set for 3 days you have 36 hours before those machines will require a functional DHCP server. That's more than enough time for most server issues to get resolved (e.g. a reboot), and even more than it takes to turn on DHCP on the secondary server if you don't think the primary server will be back online in time.
IMHO that's preferable to running dual DHCP servers. You can do that if you prefer but they MUST have different DHCP ranges (don't try to setup both DHCP servers with the same address pools).
As for point 3 - Time Machine is fine, IMHO, as long as you realize its limitations and don't expect Time Machine to backup everything, including dynamic data such as database files.
4) Am I missing a larger plot here? Can I setup the external drives or backup server in another way to be more efficient. Should I pickup another set of drives and somehow synchronize the primary and secondary server completely??
It depends on what you're preparing for/against.
If you're looking to protect against hardware failure then you could run everything on the external drives and reconnect the drives to the other machine to boot it as the server if the first one is down. That's not necessarily ideal, but it would be one option.
The second thing to consider is what services you're running that support their own replication/backup protocols. You've already seen Open Directory replicas, so that's the right way to backup your OD setup. The same applies to DNS and MySQL - both of which have their own replication protocols.
User-based data is a little harder to replicate between servers which is why a NAS option may be viable here. Of course that doesn't necessarily provide protection against accidental deletion.
At the end of the day, though, there are many ways to set this up. The right way depends on your needs, the services you're running and what's important to your business (focus on the things your business cannot do without, and have a plan for the other services (e.g. manually start the secondary DHCP server if needed.

500 internal server error while deploying a Web Dynpro application

Hi
I got the 500 internal server error while deploying the application to server.
I tried to find the log file at usr --> SAP --> SID --> JC XX --> j2EE --> Cluster --> Server 0 --> log, but no log was there.
There were structure changes in the RFC and also code change in my Web
Dynpro code.
I´m working on EP 7.
NWDS version is 7.0.1
Please help me as the production move is pending because of this.
Regards
Vineet Vikram

Hi
Restarting the server does not help in my case.
I tried it several times.
I'm getting following error message in NWA>
Originated from: com.sapmarkets.bam.logcontroller.InvalidLogQuerySessionException: Invalid or expired log query session "1"
at com.sapmarkets.bam.logcontroller.jmx.LogControllerFacade.closeLogQuerySession(LogControllerFacade.java:356)
at sun.reflect.NativeMethodAccessorImpl.invoke0
Can you pl help on this.
Regards
Vineet Vikram

Recently backing up my ipad onto my macbook, which is the backup server for all of my gadgets. This includes all my photos and tons of music. The macbook said it could not backup the ipad because there was insufficient disc space to do so. What now?

I have a macbook operating OSX10.6.7. Recently backing up my ipad which had lots of photos from a recent vacation. I use this laptop as the backup server for all of my gadgets so it has thousands of photos and tons of music. It just told me that it couldn't back up the ipad bc there wasn't enough disc space. I was afraid that this would happen eventually. What next? Newer laptop with more space? I'm not sure what files I could sacrifice to free up more space as most of these are important.

What size hard drive do you have in your MacBook? The cheapest options are, a larger internal hard drive, or an external drive. Or you could get a cheap desktop PC and network to it for storage. I've got one that lives in the hall with 3 Terabytes (That's 3000gb) of storage.

How do I restore a Windows Backup Server backup recovery partition?

I'm trying to test restoring a backup from our real server on a temp server.
First, I was surprised it can't do a restore to a smaller drive because the original server is only 1/3 full (it wants to restore all the empty bytes too).
Also it appears it wants to see that target partitions are already created.
It wants to restore recovery to an EXISTING recovery partition and OS to an existing OS partition all with exact sizes.
What if the old system died and I had to go to something new?
Do I have to preinstall 2012 R2 on a bare drive so it creates the partitions?
I've been down this path before, if it's not byte for byte match (offsets and all) it won't boot.
I'm pretty sure I could restore just the OS partition and then do a Windows Repair which would move the master boot record onto the OS drive. But that seems wrong.
What's the proper way to restore?
Is Windows Backup Server to limiting?

Hi,
1. When trying to recover a partition, it requires a same or larger target partition. If you only backup data, there is no size limitation of the target partition.
2. We need an operation system to do the recovery. However you can perform a Bare Metal Backup so it could be restored without operation system - but it may force to backup more than partition C.
If you have any feedback on our support, please send to [email protected]

The host is not authorized to connect to this Backup Server

Hi experts,
I'm trying to connect to a remote backup server S2_BS running on VM2 from a data server S1 running on VM1. When I issued following command in isql
1> SYB_BACKUP...sp_who
2> go
Msg 7221, Level 14, State 2:
Server 'S1', Line 1:
Login to site 'SYB_BACKUP' failed.
It failed to connect to its SYB_BACKUP (i.e. S2_BS is configured for SYB_BACKUP in this case).
And I got following error in the error log of S2_BS:
Jun 23 14:48:53 2014: Backup Server: 2.24.2.1: The host '10.43.13.204' is not authorized to connect to this Backup Server.
Jun 23 14:48:53 2014: Backup Server: 2.6.2.10: Login information unavailable.
I can ping VM2 from VM1 without any issue:
$ ping 10.43.13.204
PING 10.43.13.204 (10.43.13.204) 56(84) bytes of data.
64 bytes from 10.43.13.204: icmp_seq=1 ttl=64 time=0.035 ms
And have entry for S2_BS in /opt/sybase/interfaces on VM1:
S2_BS
master tcp ether 10.43.11.19 5002
query tcp ether 10.43.11.19 5002
And S2_BS is running correctly on VM2.
I'm running ASE 15.7 SP110 on both VM1 and VM2.
Could someone please let me know how to fix this?

The message is due to a new security feature. See Remote Dump Host Control
for details on how to register your host with the remote backupserver.
-bret

How to start sybase Backup server in windows 2008 r2

Unfortunately i stop the sybase backup server.
I try to start it again but i get problem in that.
Sybase BCKServer_ASE_BS , Sybase SQLServer_ASE & Sybase XPServer_ASE_XP - These could not be start
The error is in screenshot can any one help at this please....

To start I would suggest looking for more details in a) the backupserver errorlog file and b) the windows event log. Hopefully one of these will provide more details as to *what* file could not be found.

Powerbook G4 as Media/Backup Server

After a lot of research I still haven't figured out a plan that will suit my needs. Im hoping someone here may be able to help out. I have an old Powerbook G4 1Ghz with 1gig RAM running OS 10.3.9. I don't use this machine currently, though it runs perfectly fine...minus the facts that it must be plugged in to operate and the OS is so old I cannot update any applications.
I'd like to re-purpose this machine as a media server and a backup server for my current Macbook Pro. My idea is to have two duplicate external Hard-drives connected to the powerbook for redundancy. I will store all of my media on these drives, as well as point time machine to these for backups for the MB pro. I want AppleTV to use the powerbook as its source library. My first problem is that iTunes on that machine is too old for AppleTV, and the OS is too old to upgrade iTunes to a workable version. So I know I will have to update the OS to something more current.
The second issue is how to setup the backup redundancy. In addition to any new backups from the MB Pro, I also have a ton of data/media Ive acquired over the years that I want to be able to access regularly. Ive already been burned on a couple drives in the past and having at least two copies of everything is a must. So what is the best solution for the backup discs? Since this system is more than just a backup (it needs to also play the media files for AppleTV), does it make sense to do a RAID of some kind, or can I get by with just mirroring two duplicate external drives?
With all that said, what OS should I upgrade to, and how should I set up the redundant storage? I apologize for the long-windedness and appreciate any feedback. Thanks.

Whew, I wouldn't use Time Machine at all, nor Raid, more on both later.
For OS, how much RAM does it have?
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
There are workarounds if the 867MHz is the only hangup...
http://sourceforge.net/projects/leopardassist/

Easiest way to Configuring backup server in oracle 8i

I want to make a backup server i.e database for my existing database in different server. For example: My existing server completely crashed. I am having backup of os level complete backup only. Please note that not useing export file. Please suggest.

It totally depends on your business requirements. If business requires something then you have to do it even though it is hard through the technology.
Oracle does provide the following two main things to ponder on.
1) Oracle Replication.
2) Oracle Data Guard.
-aijaz

Cluster and Backup server

Hello guys;
I want to use a cluster oracle server and another server in another place as a backup server to copy the database on line from the cluster server.
If I want to make the backup server a primary server if something wrong happened to the cluster server.
what the steps should I do? or if there is any document to read I'll be thankful
thanks in advance

Hi,
What do you refer by saying cluster ? If you want to have a HA (High Availability) with Active/Passive cluster then you can go with 3rd party cluster vendor, like HACMP from IBM, ServiceGuard from HP and so on. If you want to create this with Oracle technologies then you are talking about Oracle RAC One Node. Of course you always go with Oracle RAC (Real Application Cluster) if you want to have a Active/Active cluster. These are in terms of cluster and High Availability.
There is another point if you want to create a DR (Disaster Recovery) of you primary database then you would consider implementing Oracle Dataguard.
Oracle has a rich documentation for blueprints and best practices, my sincerely advice is to get familiar with it:
http://www.oracle.com/technetwork/database/features/availability/maa-090890.html
Regards,
Sve

WS not created in application server control after deployment

Hi,
I just tried to deploy fulfillmentESB project(SOADemo Projects) from Jdev to Oracle App server control. But there was no webservice created in Oracle application server control under webservices link....plz help me...
Actually the steps which i had followed to deploy that fulfillment project are:
* right-click fulfillmentESB
* select Register with ESB, Integration connection
after which the fulfillment webservice can be seen in ESB control as well as application server control. But i could not able to see webservice created in application server control.
Also i tried deploying the fulfillmentESB using EAR file - no use
So kindly give me some steps to solve this issue...
-Indhu

Here is an example of the two steps required to deploy a Web Service application, using the ant task for the 10.1.3.x release.
<project name="CalculatePrice" default="all" basedir="." xmlns:o="antlib:oracle">
<property file="build.properties"/>
<property name="deployeruri"        value="deployer:oc4j:${oc4j.host}:${oc4j.admin.port}"/>

<property name="bindweb.website" value="default-web-site"/>
<property name="app.name" value="sdots"/>
<target name="deploy">
    < o :deploy file="${basedir}/dist/${app.name}.ear"
              deploymentname="${app.name}" deployeruri="${deployeruri}"
              userid="${oc4j.admin.user}" password="${oc4j.admin.password}"/>
    < o :bindWebApp deploymentname="${app.name}" deployeruri="${deployeruri}"
                  userid="${oc4j.admin.user}" password="${oc4j.admin.password}"
                  webmodule="webservice-web" websitename="${bindweb.website}"
                  contextroot="/sdots"/>
</target>Not sure if this applies to your specific scenario.
ps. cross posting on the different OTN forums is generally not a good idea as you get threads out of sync. In this specific case, you are running into an issue with a specific ESB demo, and the ESB-SOA forum is definitly a better palce to get specific help.
WS not created in application server control after deployment
ps2. I guess you should got it by now, as I am not the first one to make this comment.
Webservice not created in oracle application server after deployment
ps3. We still don't have details about the versions you are using and the specific about THE SOADemo Projects - provide the information someone else would need in the forum that best correspond to your issue; the SOA one in this case ;-)

WS not found in application server control after deployment

Hi,
I just tried to deploy fulfillmentESB project(SOADemo Projects) from Jdev to Oracle App server control. But there was no webservice created in Oracle application server control under webservices link....plz help me...
Actually the steps which i had followed to deploy that fulfillment project are:
* right-click fulfillmentESB
* select Register with ESB, Integration connection
after which the fulfillment webservice can be seen in ESB control as well as application server control. But i could not able to see webservice created in application server control.
Also i tried deploying the fulfillmentESB using EAR file - no use
So kindly give me some steps to solve this issue...
-Indhu

Here is an example of the two steps required to deploy a Web Service application, using the ant task for the 10.1.3.x release.
<project name="CalculatePrice" default="all" basedir="." xmlns:o="antlib:oracle">
<property file="build.properties"/>
<property name="deployeruri"        value="deployer:oc4j:${oc4j.host}:${oc4j.admin.port}"/>

<property name="bindweb.website" value="default-web-site"/>
<property name="app.name" value="sdots"/>
<target name="deploy">
    < o :deploy file="${basedir}/dist/${app.name}.ear"
              deploymentname="${app.name}" deployeruri="${deployeruri}"
              userid="${oc4j.admin.user}" password="${oc4j.admin.password}"/>
    < o :bindWebApp deploymentname="${app.name}" deployeruri="${deployeruri}"
                  userid="${oc4j.admin.user}" password="${oc4j.admin.password}"
                  webmodule="webservice-web" websitename="${bindweb.website}"
                  contextroot="/sdots"/>
</target>Not sure if this applies to your specific scenario.
ps. cross posting on the different OTN forums is generally not a good idea as you get threads out of sync. In this specific case, you are running into an issue with a specific ESB demo, and the ESB-SOA forum is definitly a better palce to get specific help.
WS not created in application server control after deployment
ps2. I guess you should got it by now, as I am not the first one to make this comment.
Webservice not created in oracle application server after deployment
ps3. We still don't have details about the versions you are using and the specific about THE SOADemo Projects - provide the information someone else would need in the forum that best correspond to your issue; the SOA one in this case ;-)

Fusion Order Demo errors server-setup-seed-deploy-test

Hello everyone....I am new to SOA and new to this site as well. This is my first post. Facing a lot of hurdles deploying the FOD.
I am stuck with errors at this point server-setup-seed-deploy-test. Can anyone of you be kind enough to guide me. Thank you.
Buildfile: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\bin\build.xml
[echo] Ant: Apache Ant version 1.7.1 compiled on June 27 2008 Java: 1.6
[echo] Using mds-type : db
[input] skipping input as property server.password has already been set.
init:
[echo] SOA Suite 11g version:
[java]
[java] *****************************************************************************
[java] Oracle SOA Server version 11.1.1.6.0
[java] Build: 0
[java] Build time: Wed Dec 14 13:55:57 PST 2011
[java] Build type: release
[java] Source tag: PCBPEL_11.1.1.6.0_GENERIC_111214.0600.1553
[java]
[echo] soa infra mgmt home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\
server-setup-seed-deploy-test:
[echo] Setting up mds store, deploying shared artifacts,
seeding jms info, deploying to server, and running tests
[echo] Ant: Apache Ant version 1.7.1 compiled on June 27 2008 Java: 1.6
[echo] Using mds-type : db
[input] skipping input as property server.password has already been set.
init:
[echo] SOA Suite 11g version:
[java]
[java] *****************************************************************************
[java] Oracle SOA Server version 11.1.1.6.0
[java] Build: 0
[java] Build time: Wed Dec 14 13:55:57 PST 2011
[java] Build type: release
[java] Source tag: PCBPEL_11.1.1.6.0_GENERIC_111214.0600.1553
[java]
[echo] soa infra mgmt home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\
createMDSConnections:
[echo] Ant: Apache Ant version 1.7.1 compiled on June 27 2008 Java: 1.6
[echo] Using mds-type : db
[input] skipping input as property server.password has already been set.
createMDSConnectionForDB:
[echo] Creating ../.adf/META-INF/adf-config.xml for database backed MDS
[input] skipping input as property mds.db.password has already been set.
[copy] Copying 1 file to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\.adf\META-INF
[echo] Using jdbc:oracle:thin:@localhost:1521:xe for db-based backing, with user dev_mds
[echo] Ant: Apache Ant version 1.7.1 compiled on June 27 2008 Java: 1.6
[echo] Using mds-type : db
[input] skipping input as property server.password has already been set.
createMDSConnectionForFileStore:
[echo] Ant: Apache Ant version 1.7.1 compiled on June 27 2008 Java: 1.6
[echo] Using mds-type : db
[input] skipping input as property server.password has already been set.
createMDSConnectionForServerFileStore:
importCommonServiceArtifactsIntoMds:
[java] Starting local filesystem import into mds ..
[java] 26-May-2012 00:53:46 oracle.mds
[java] NOTIFICATION: PManager instance is created without multitenancy support as JVM flag "oracle.multitenant.enabled" is not set to enable multitenancy support.
[java] Got target mds-instance: mstore-usage_1 from F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\bin\..\.adf\META-INF\adf-config.xml
[java] Creating mds connection to ./soa-seed/apps
[java] --> F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\bin\.\soa-seed
[java] 26-May-2012 00:53:46 oracle.mds
[java] NOTIFICATION: PManager instance is created without multitenancy support as JVM flag "oracle.multitenant.enabled" is not set to enable multitenancy support.
[java] Local item: /apps/FusionOrderDemoShared/services/partnersupplier/Warehouse.xsd
[java] Local item: /apps/FusionOrderDemoShared/services/orderbooking/OrderBookingProcessor.wsdl
[java] Local item: /apps/FusionOrderDemoShared/services/creditAuthorization/CreditAuthorizationService.wsdl
[java] Local item: /apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/store/service/common/serviceinterface/StoreFrontService.xsd
[java] Local item: /apps/FusionOrderDemoShared/policy/fault-bindings.xml
[java] Local item: /apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/store/queries/common/CustomerInfoVOSDO.xsd
[java] Local item: /apps/FusionOrderDemoShared/services/partnersupplier/PartnerSupplierComposite.wsdl
[java] Local item: /apps/FusionOrderDemoShared/policy/fault-policies.xml
[java] Local item: /apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/store/service/common/serviceinterface/StoreFrontService.wsdl
[java] Local item: /apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/store/queries/common/OrderInfoVOSDO.xsd
[java] Local item: /apps/FusionOrderDemoShared/services/orderbooking/OrderProcessor.xsd
[java] Local item: /apps/FusionOrderDemoShared/services/creditAuthorization/creditauthorization.xsd
[java] Local item: /apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/entities/events/OrderEO.xsd
[java] Local item: /apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/entities/events/OrderEO.edl
[java] Local item: /apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/store/queries/common/OrderItemsInfoVOSDO.xsd
[java] Now transferring ..
[java] 26-May-2012 00:53:46 oracle.mds
[java] NOTIFICATION: import operation started.
[java] 26-May-2012 00:53:46 oracle.mds
[java] NOTIFICATION: import is completed. Total number of documents successfully processed : 15, total number of documents failed : 0.
[java] Transferred size = 15
[java] Transferred - /apps/FusionOrderDemoShared/policy/fault-bindings.xml
[java] Transferred - /apps/FusionOrderDemoShared/policy/fault-policies.xml
[java] Transferred - /apps/FusionOrderDemoShared/services/partnersupplier/Warehouse.xsd
[java] Transferred - /apps/FusionOrderDemoShared/services/orderbooking/OrderProcessor.xsd
[java] Transferred - /apps/FusionOrderDemoShared/services/orderbooking/OrderBookingProcessor.wsdl
[java] Transferred - /apps/FusionOrderDemoShared/services/creditAuthorization/creditauthorization.xsd
[java] Transferred - /apps/FusionOrderDemoShared/services/partnersupplier/PartnerSupplierComposite.wsdl
[java] Transferred - /apps/FusionOrderDemoShared/services/creditAuthorization/CreditAuthorizationService.wsdl
[java] Transferred - /apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/entities/events/OrderEO.xsd
[java] Transferred - /apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/entities/events/OrderEO.edl
[java] Transferred - /apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/store/queries/common/OrderInfoVOSDO.xsd
[java] Transferred - /apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/store/queries/common/CustomerInfoVOSDO.xsd
[java] Transferred - /apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/store/queries/common/OrderItemsInfoVOSDO.xsd
[java] Transferred - /apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/store/service/common/serviceinterface/StoreFrontService.xsd
[java] Transferred - /apps/FusionOrderDemoShared/services/oracle/fodemo/storefront/store/service/common/serviceinterface/StoreFrontService.wsdl
[echo] Ant: Apache Ant version 1.7.1 compiled on June 27 2008 Java: 1.6
[echo] Using mds-type : db
[input] skipping input as property server.password has already been set.
createSOAPartitionIfNotExist:
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
listPartitions:
[input] skipping input as property platform has already been set.
[input] skipping input as property host has already been set.
[input] skipping input as property port has already been set.
[input] skipping input as property user has already been set.
[secure-input] skipping secure-input as property password has already been set.
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
folderMgrTask:
[java] calling FolderManager.initConnection(), m_platform= weblogic, m_host=localhost, m_port=7001, m_user=weblogic
[java] Connecting to: service:jmx:t3://localhost:7001/jndi/weblogic.management.mbeanservers.runtime
[java] connection initiated
[java] folderMBean=oracle.soa.config:name=soa-infra,j2eeType=FolderLifecycleConfig,Application=soa-infra
[java] Following 2 partitions are currently available on the platform:
[java]
[java] 1. default
[java] 2. soaFusionOrderDemo
[java]
[echo] Creating partition soaFusionOrderDemo? ${createPartition}
[echo] Ant: Apache Ant version 1.7.1 compiled on June 27 2008 Java: 1.6
[echo] Using mds-type : db
[input] skipping input as property server.password has already been set.
doCreatePartition:
[delete] Deleting: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\bin\partitionList.dat
[echo] Ant: Apache Ant version 1.7.1 compiled on June 27 2008 Java: 1.6
[echo] Using mds-type : db
[input] skipping input as property server.password has already been set.
init:
[echo] SOA Suite 11g version:
[java]
[java] *****************************************************************************
[java] Oracle SOA Server version 11.1.1.6.0
[java] Build: 0
[java] Build time: Wed Dec 14 13:55:57 PST 2011
[java] Build type: release
[java] Source tag: PCBPEL_11.1.1.6.0_GENERIC_111214.0600.1553
[java]
[echo] soa infra mgmt home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\
compile-build-all:
[echo] Building and compiling SOA Fusion Order Demo ..
clean:
[echo] Cleanup of OrderApprovalHumanTask
[delete] Deleting: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderApprovalHumanTask\deploy\OrderApprovalHumanTask.war
[delete] Deleting: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderApprovalHumanTask\deploy\OrderApprovalHumanTask.ear
init:
compile:
[javac] Compiling 6 source files to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderApprovalHumanTask\public_html\WEB-INF\classes
copy:
[copy] Copying 191 files to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderApprovalHumanTask\public_html\WEB-INF\classes
create-ear:
[copy] Copying 4 files to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderApprovalHumanTask\public_html\WEB-INF\lib
[war] Building war: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderApprovalHumanTask\deploy\OrderApprovalHumanTask.war
[delete] Deleting directory F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderApprovalHumanTask\public_html\WEB-INF\lib
setupDeploymentEnvironment:
[echo] Step1: copy template ./templates/connections.xml.seed to ../../.adf/META-INF/connections.xml
[copy] Copying 1 file to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\.adf\META-INF
[echo] Step2: setup descriptor, soa-only? false, modifying ../../.adf/META-INF/connections.xml
[echo] replacing ws-endpoint with localhost:7001/StoreFrontServiceHooks/StoreFrontService
[echo] replacing ws-binding with {www.globalcompany.example.com}StoreFrontServiceSoapHttp
[mkdir] Created dir: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderApprovalHumanTask\deploy\adf\META-INF
[copy] Copying 2 files to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderApprovalHumanTask\deploy\adf\META-INF
[echo] Creating custom adf config for customization of connections.xml - datasource: jdbc/mds/MDS_LocalTxDataSource
[mkdir] Created dir: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderApprovalHumanTask\deploy\lib
[copy] Copying 1 file to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderApprovalHumanTask\deploy\lib
[ear] Building ear: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderApprovalHumanTask\deploy\OrderApprovalHumanTask.ear
[delete] Deleting directory F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderApprovalHumanTask\deploy\adf
[delete] Deleting directory F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderApprovalHumanTask\deploy\lib
create-deployable-composite:
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
[input] skipping input as property compositeDir has already been set.
[input] skipping input as property compositeName has already been set.
[input] skipping input as property revision has already been set.
clean:
[echo] deleting F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin/..//deploy/sca_OrderBookingComposite_rev1.0.jar
[delete] Deleting: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\deploy\sca_OrderBookingComposite_rev1.0.jar
init:
scac-validate:
[echo] Running scac-validate in F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin/..//composite.xml
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
[input] skipping input as property compositeDir has already been set.
[input] skipping input as property compositeName has already been set.
[input] skipping input as property revision has already been set.
scac:
[scac] Validating composite "F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin/..//composite.xml"
[scac] F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin/..//composite.xml:170: warning: Failed to Find Binding "CreditCardAuthorizationService":"{http://www.globalcompany.example.com/ns/CreditAuthorizationService}CreditAuthorizationPort" in WSDL Manager
[scac] F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin/..//composite.xml:163: warning: Failed to Find Binding "PartnerSupplierService":"{http://www.partnersupplier.example.com/ns/warehouse}ExternalPartnerSupplier_pt" in WSDL Manager
[scac] F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin/..//composite.xml:180: warning: Failed to Find Binding "StoreFrontService":"{www.globalcompany.example.com}StoreFrontServiceSoapHttpPort" in WSDL Manager
[scac] OrderProcessor.bpel:223: warning: <from> value type "{http://www.w3.org/2001/XMLSchema}long" is not compatible with <to> value type "{http://www.w3.org/2001/XMLSchema}string"
[scac] OrderProcessor.bpel:310: warning: <from> value type "{http://www.w3.org/2001/XMLSchema}decimal" is not compatible with <to> value type "{http://www.w3.org/2001/XMLSchema}string"
[scac] OrderProcessor.bpel:310: warning: <from> value type "{http://www.w3.org/2001/XMLSchema}integer" is not compatible with <to> value type "{http://www.w3.org/2001/XMLSchema}string"
[scac] OrderProcessor.bpel:390: warning: <from> value type "{http://www.w3.org/2001/XMLSchema}decimal" is not compatible with <to> value type "{http://www.w3.org/2001/XMLSchema}double"
[scac] OrderProcessor.bpel:390: warning: <from> value type "{http://www.w3.org/2001/XMLSchema}string" is not compatible with <to> value type "{http://www.w3.org/2001/XMLSchema}boolean"
[scac] OrderProcessor.bpel:429: warning: <from> value type "{http://www.w3.org/2001/XMLSchema}boolean" is not compatible with <to> value type "{http://www.w3.org/2001/XMLSchema}string"
[scac] OrderProcessor.bpel:571: warning: <from> value type "{http://www.w3.org/2001/XMLSchema}integer" is not compatible with <to> value type "{http://www.w3.org/2001/XMLSchema}string"
[scac] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
[scac] >> modified xmlbean locale class in use
[scac] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
package:
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
[input] skipping input as property compositeDir has already been set.
[input] skipping input as property compositeName has already been set.
[input] skipping input as property revision has already been set.
compile-source:
[mkdir] Created dir: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\dist
[copy] Copying 142 files to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\dist
[copy] Warning: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\src not found.
[copy] Warning: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\SCA-INF\src not found.
[copy] Copying 6 files to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\dist\SCA-INF\classes
[jar] Building jar: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\deploy\sca_OrderBookingComposite_rev1.0.jar
[delete] Deleting directory F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\dist
setupDeploymentEnvironment:
[copy] Copying 1 file to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin
[echo] Setting up deployment plan, modifying orderbooking_deployment_plan.xml
[echo] Replacing ws-endpoint with localhost:7001/StoreFrontServiceHooks/StoreFrontService
[echo] Replacing soa server and wls server information
[echo] -SOA: localhost 7001
[echo] Replacing file adapter endpoint with /tmp
[echo] Disabling global bam sensors? false
[echo] Amending jndi destination for jms topic jms/DemoSupplierTopicUdd
[echo] Replacing soa partition name with soaFusionOrderDemo
[echo] Replacing values for bam connection in connections.xml
[echo] Bam server host: localhost
[echo] Bam server host: 9001
[echo] Bam server user: weblogic
[echo] Spring lib path: F:\Oracle\Middleware\Jdeveloper\jdeveloper\/../oracle_common/modules/org.springframework_2.5.jar
compile-classes:
create-deployable-composite:
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
[input] skipping input as property compositeDir has already been set.
[input] skipping input as property compositeName has already been set.
[input] skipping input as property revision has already been set.
clean:
[echo] deleting F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\bin/..//deploy/sca_PartnerSupplierComposite_rev1.0.jar
[delete] Deleting: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\deploy\sca_PartnerSupplierComposite_rev1.0.jar
init:
scac-validate:
[echo] Running scac-validate in F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\bin/..//composite.xml
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
[input] skipping input as property compositeDir has already been set.
[input] skipping input as property compositeName has already been set.
[input] skipping input as property revision has already been set.
scac:
[scac] Validating composite "F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\bin/..//composite.xml"
[scac] PartnerSupplierMediator.mplan: warning: Case "ExternalPartnerSupplier.externalpartnersupplier_client.process" doesnt have any payload transformation Please make sure source and target message part name are same and of same type. Otherwise, target reference may fail to execute with error message like "Input sourcelike Null" or "Part not found"
[scac] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
[scac] >> modified xmlbean locale class in use
[scac] >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
package:
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
[input] skipping input as property compositeDir has already been set.
[input] skipping input as property compositeName has already been set.
[input] skipping input as property revision has already been set.
compile-source:
[echo] deleting .class files of F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\bin/..//SCA-INF/classes
[javac] Compiling 18 source files to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\SCA-INF\classes
[javac] Note: Some input files use unchecked or unsafe operations.
[javac] Note: Recompile with -Xlint:unchecked for details.
[mkdir] Created dir: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\dist
[copy] Copying 68 files to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\dist
[copy] Warning: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\SCA-INF\src not found.
[copy] Copying 6 files to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\dist\SCA-INF\classes
[jar] Building jar: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\deploy\sca_PartnerSupplierComposite_rev1.0.jar
[delete] Deleting directory F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\dist
[echo] Spring lib path: F:\Oracle\Middleware\Jdeveloper\jdeveloper\/../oracle_common/modules/org.springframework_2.5.jar
setupDeploymentEnvironment:
[copy] Copying 1 file to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\bin
[echo] Setting up deployment plan, modifying PartnerSupplierComposite_cfgplan.xml
[echo] Replacing ejb-name with WebLogicFusionOrderDemo-ExternalLegacyPartnerSupplierJScaEjb
[echo] Replacing file adapter endpoint with /tmp/quote
create-deployable-composite:
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
[input] skipping input as property compositeDir has already been set.
[input] skipping input as property compositeName has already been set.
[input] skipping input as property revision has already been set.
clean:
[echo] deleting F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderSDOComposite\bin/..//deploy/sca_OrderSDOComposite_rev1.0.jar
[delete] Deleting: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderSDOComposite\deploy\sca_OrderSDOComposite_rev1.0.jar
init:
scac-validate:
[echo] Running scac-validate in F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderSDOComposite\bin/..//composite.xml
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
[input] skipping input as property compositeDir has already been set.
[input] skipping input as property compositeName has already been set.
[input] skipping input as property revision has already been set.
scac:
[scac] Validating composite "F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderSDOComposite\bin/..//composite.xml"
[scac] CustomerAndOrderService.bpel:254: warning: <from> value type "{http://www.w3.org/2001/XMLSchema}anySimpleType" is not compatible with <to> value type "{http://www.w3.org/2001/XMLSchema}integer"
[scac] CustomerAndOrderService.bpel:359: warning: <from> value type "{http://www.w3.org/2001/XMLSchema}integer" is not compatible with <to> value type "{http://www.w3.org/2001/XMLSchema}long"
[scac] CustomerAndOrderService.bpel:493: warning: <from> value type "{http://www.w3.org/2001/XMLSchema}integer" is not compatible with <to> value type "{http://www.w3.org/2001/XMLSchema}long"
package:
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
[input] skipping input as property compositeDir has already been set.
[input] skipping input as property compositeName has already been set.
[input] skipping input as property revision has already been set.
compile-source:
[mkdir] Created dir: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderSDOComposite\dist
[copy] Copying 12 files to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderSDOComposite\dist
[copy] Warning: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderSDOComposite\src not found.
[copy] Warning: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderSDOComposite\SCA-INF\src not found.
[copy] Copying 6 files to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderSDOComposite\dist\SCA-INF\classes
[jar] Building jar: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderSDOComposite\deploy\sca_OrderSDOComposite_rev1.0.jar
[delete] Deleting directory F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderSDOComposite\dist

continued........................
create-deployable-composite:
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
[input] skipping input as property compositeDir has already been set.
[input] skipping input as property compositeName has already been set.
[input] skipping input as property revision has already been set.
clean:
[echo] deleting F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\bin/..//deploy/sca_B2BX12OrderGateway_rev1.0.jar
[delete] Deleting: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\deploy\sca_B2BX12OrderGateway_rev1.0.jar
init:
scac-validate:
[echo] Running scac-validate in F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\bin/..//composite.xml
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
[input] skipping input as property compositeDir has already been set.
[input] skipping input as property compositeName has already been set.
[input] skipping input as property revision has already been set.
scac:
[scac] Validating composite "F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\bin/..//composite.xml"
[scac] F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\bin/..//composite.xml:48: warning: Failed to Find Binding "StoreFrontService":"{www.globalcompany.example.com}StoreFrontServiceSoapHttpPort" in WSDL Manager
[scac] F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\bin/..//composite.xml:59: warning: Failed to Find Binding "OrderBookingService":"{http://www.globalcompany.example.com/ns/OrderBookingService}OrderProcessor_pt" in WSDL Manager
[scac] B2BOrderProcessingEngine.componentType: warning: property "bpel.config.use.events" may not be understood by BPEL component B2BOrderProcessingEngine - it will likely be ignored.
[scac] B2BOrderProcessingEngine.bpel:188: warning: <from> value type "{http://www.w3.org/2001/XMLSchema}integer" is not compatible with <to> value type "{http://www.w3.org/2001/XMLSchema}string"
package:
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
[input] skipping input as property compositeDir has already been set.
[input] skipping input as property compositeName has already been set.
[input] skipping input as property revision has already been set.
compile-source:
[mkdir] Created dir: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\dist
[copy] Copying 25 files to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\dist
[copy] Warning: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\src not found.
[copy] Warning: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\SCA-INF\src not found.
[copy] Copying 6 files to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\dist\SCA-INF\classes
[jar] Building jar: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\deploy\sca_B2BX12OrderGateway_rev1.0.jar
[delete] Deleting directory F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\dist
setupDeploymentEnvironment:
[copy] Copying 1 file to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\bin
[echo] Setting up deployment plan, modifying B2BX12OrderGateway_deployment_plan.xml
[echo] Replacing ws-endpoint with localhost:7001/StoreFrontServiceHooks/StoreFrontService
[echo] Replacing soa server and wls server information
[echo] -SOA: localhost 7001
[echo] Replacing communication style, eventbased? true
[echo] Replacing soa partition name with soaFusionOrderDemo
[echo] Wls home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\/../wlserver_10.3
[echo] Oracle home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\
init:
compile:
create-war:
[echo] Deploying jsca shared lib? true
[echo] Wls home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\/../wlserver_10.3
[echo] Oracle home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\
create-ear:
[echo] global: true > ejb: ${use.ejb} jsca: true
[echo] Deploying jsca shared lib? true
[echo] Wls home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\/../wlserver_10.3
[echo] Oracle home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\
clean:
[echo] Cleaning up external partner supplier ejb project ../classes/../deploy
[delete] Deleting: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\ExternalLegacyPartnerSupplierEjb\deploy\ExternalPartnerSupplierEjb.ear
[echo] Deploying jsca shared lib? true
[echo] Wls home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\/../wlserver_10.3
[echo] Oracle home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\
init:
copy:
[copy] Copying 5 files to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\ExternalLegacyPartnerSupplierEjb\classes
compile:
[javac] Compiling 6 source files to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\ExternalLegacyPartnerSupplierEjb\classes
[javac] Note: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\ExternalLegacyPartnerSupplierEjb\src\com\otn\sample\fod\soa\externalps\test\EpsSessionEJBClient.java uses unchecked or unsafe operations.
[javac] Note: Recompile with -Xlint:unchecked for details.
create-ejb-ear:
[echo] Deploying jsca shared lib? true
[echo] Wls home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\/../wlserver_10.3
[echo] Oracle home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\
init:
copy:
compile:
create-jsca-ear:
[mkdir] Created dir: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\ExternalLegacyPartnerSupplierEjb\deploy\APP-INF\lib
[copy] Copying 1 file to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\ExternalLegacyPartnerSupplierEjb\deploy\APP-INF\lib
[echo] ../classes/meta-inf/
[jar] Building jar: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\ExternalLegacyPartnerSupplierEjb\deploy\APP-INF\lib\ExternalPartnerSupplierScaModule.jar
[jar] Building MANIFEST-only jar: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\ExternalLegacyPartnerSupplierEjb\deploy\empty.jar
[ear] Building ear: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\ExternalLegacyPartnerSupplierEjb\deploy\ExternalPartnerSupplierEjb.ear
compile-deploy-all:
[echo] Deploying SOA Fusion Order Demo ..
[echo] Deploying jsca shared lib? true
[echo] Wls home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\/../wlserver_10.3
[echo] Oracle home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\
deploy-application:
[echo] Deploying jsca shared lib? true
[echo] Wls home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\/../wlserver_10.3
[echo] Oracle home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\
deploy-jsca-library:
[wldeploy] weblogic.Deployer -remote -noexit -name weblogic-sca -source F:\Oracle\Middleware\wlserver_10.3\common\deployable-libraries\weblogic-sca-1.1.war -targets AdminServer -adminurl t3://localhost:7001 -user weblogic -password ******** -deploy -library
[wldeploy] weblogic.Deployer invoked with options: -remote -noexit -name weblogic-sca -source F:\Oracle\Middleware\wlserver_10.3\common\deployable-libraries\weblogic-sca-1.1.war -targets AdminServer -adminurl t3://localhost:7001 -user weblogic -deploy -library
[wldeploy] <26-May-2012 00:54:30 o'clock BST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, weblogic-sca [archive: F:\Oracle\Middleware\wlserver_10.3\common\deployable-libraries\weblogic-sca-1.1.war], to AdminServer .>
[wldeploy] weblogic.Deployer -remote -upload -noexit -name ExternalPartnerSupplierEjb -source F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\ExternalLegacyPartnerSupplierEjb\deploy\ExternalPartnerSupplierEjb.ear -targets AdminServer -adminurl t3://localhost:7001 -user weblogic -password ******** -deploy
[wldeploy] weblogic.Deployer invoked with options: -remote -upload -noexit -name ExternalPartnerSupplierEjb -source F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\ExternalLegacyPartnerSupplierEjb\deploy\ExternalPartnerSupplierEjb.ear -targets AdminServer -adminurl t3://localhost:7001 -user weblogic -deploy
[wldeploy] <26-May-2012 00:54:32 o'clock BST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, ExternalPartnerSupplierEjb [archive: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\ExternalLegacyPartnerSupplierEjb\deploy\ExternalPartnerSupplierEjb.ear], to AdminServer .>
[wldeploy] Task 24 initiated: [Deployer:149026]deploy application ExternalPartnerSupplierEjb on AdminServer.
[wldeploy] Task 24 completed: [Deployer:149026]deploy application ExternalPartnerSupplierEjb on AdminServer.
[wldeploy] Target state: deploy completed on Server AdminServer
[wldeploy]
deploy-composite:
attachplan:
[input] skipping input as property scac.sar has already been set.
[input] skipping input as property scac.plan has already been set.
[attachplan] attachPlan: Started for Composite SAR file = ../OrderBookingComposite/deploy/sca_OrderBookingComposite_rev1.0.jar using deploy plan = F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin/orderbooking_deployment_plan.xml
[attachplan] Load deployment plan file F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin/orderbooking_deployment_plan.xml
[attachplan] Done Load deployment plan file F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin/orderbooking_deployment_plan.xml
[attachplan] Unpacking the Composite SAR to tmp folder F:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\soaear_14030.tmp
[attachplan] Copy new plan file orderbooking_deployment_plan.xml to F:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\soaear_14030.tmp\soaconfigplan.xml
[attachplan] Repacking F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\bin\..\OrderBookingComposite\deploy\sca_OrderBookingComposite_rev1.0.jar file soaconfigplan.xml
[attachplan] Deleting tmp composite sar folder ...F:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\soaear_14030.tmp
[attachplan] Attach plan successful
[echo] Deploying to http://localhost:7001/soa-infra/deployer
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
deploy:
[input] skipping input as property serverURL has already been set.
[input] skipping input as property sarLocation has already been set.
[input] skipping input as property password has already been set.
[deployComposite] setting user/password..., user=weblogic
[deployComposite] Processing sar=../OrderBookingComposite/deploy/sca_OrderBookingComposite_rev1.0.jar
[deployComposite] Adding sar file - F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\bin\..\OrderBookingComposite\deploy\sca_OrderBookingComposite_rev1.0.jar
[deployComposite] INFO: Creating HTTP connection to host:localhost, port:7001
[deployComposite] INFO: Received HTTP response from the server, response code=200
[deployComposite] ---->Deploying composite success.
[delete] Deleting: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin\deployResult.dat
createBAMConfig:
[copy] Copying 15 files to F:\Oracle\Middleware\Jdeveloper\jdeveloper\bam\dataObjects
seedBAMServerObjects:
[java] Oracle BAM Command Utility [Build 16732, BAM Repository Version 2025] Copyright © 2002, 2011, Oracle and/or its affiliates. All rights reserved.
[java] Exception in thread "main" java.lang.NoClassDefFoundError: org/apache/commons/codec/binary/Base64
[java]      at oracle.bam.common.cryptography.Cryptor.decrypt(Cryptor.java:102)
[java]      at oracle.bam.icommand.ConsoleController.readConfigPassword(ConsoleController.java:308)
[java]      at oracle.bam.icommand.ConsoleController.resolvePassword(ConsoleController.java:263)
[java]      at oracle.bam.middleware.icommandengine.Controller.go(Controller.java:214)
[java]      at oracle.bam.middleware.icommandengine.Controller.go(Controller.java:186)
[java]      at oracle.bam.icommand.ConsoleController.go(ConsoleController.java:183)
[java]      at oracle.bam.icommand.Application.main(Application.java:56)
[java] Caused by: java.lang.ClassNotFoundException: org.apache.commons.codec.binary.Base64
[java]      at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
[java]      at java.security.AccessController.doPrivileged(Native Method)
[java]      at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
[java]      at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
[java]      at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
[java]      at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
[java]      ... 7 more
[java] Java Result: 1
seedBAMAdapterResources:
[echo] Seeding bam adapter connection factory for fusion order demo (F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin)
[copy] Copying 1 file to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin
[copy] Copying 1 file to F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin
[java]
[java] Initializing WebLogic Scripting Tool (WLST) ...
[java]
[java] Welcome to WebLogic Server Administration Scripting Shell
[java]
[java] Type help() for help on available commands
[java]
[java] Starting modification of BAM resource adapter connection factory ..
[java] Connecting to t3://localhost:7001 with userid weblogic ...
[java] Successfully connected to Admin Server 'AdminServer' that belongs to domain 'dev_domain'.
[java]
[java] Warning: An insecure protocol was used to connect to the
[java] server. To ensure on-the-wire security, the SSL port or
[java] Admin port should be used instead.
[java]
[java] Configuring OracleBamAdapter - amending connection factory info for eis/bam/rmi and eis/bam/soap
[java] Redeploying application OracleBamAdapter ...
[java] <26-May-2012 00:54:57 o'clock BST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating redeploy operation for application, OracleBamAdapter [archive: null], to AdminServer .>
[java] .....................Completed the redeployment of Application with status completed
[java] Current Status of your Deployment:
[java] Deployment command type: redeploy
[java] Deployment State : completed
[java] Deployment Message : no message
[java] <26-May-2012 00:56:00 o'clock BST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>
[delete] Deleting: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin\createBamResourceAdapterCF.py
[delete] Deleting: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderBookingComposite\bin\BamAdapterDeploymentPlan_1337990090265.xml
[echo] Spring lib path: F:\Oracle\Middleware\Jdeveloper\jdeveloper\/../oracle_common/modules/org.springframework_2.5.jar
deploy-composite:
attachplan:
[input] skipping input as property scac.sar has already been set.
[input] skipping input as property scac.plan has already been set.
[attachplan] attachPlan: Started for Composite SAR file = ../PartnerSupplierComposite/deploy/sca_PartnerSupplierComposite_rev1.0.jar using deploy plan = F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\bin/PartnerSupplierComposite_cfgplan.xml
[attachplan] Load deployment plan file F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\bin/PartnerSupplierComposite_cfgplan.xml
[attachplan] Done Load deployment plan file F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\bin/PartnerSupplierComposite_cfgplan.xml
[attachplan] Unpacking the Composite SAR to tmp folder F:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\soaear_31767.tmp
[attachplan] Copy new plan file PartnerSupplierComposite_cfgplan.xml to F:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\soaear_31767.tmp\soaconfigplan.xml
[attachplan] Repacking F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\bin\..\PartnerSupplierComposite\deploy\sca_PartnerSupplierComposite_rev1.0.jar file soaconfigplan.xml
[attachplan] Deleting tmp composite sar folder ...F:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\soaear_31767.tmp
[attachplan] Attach plan successful
[echo] Deploying to http://localhost:7001/soa-infra/deployer
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
deploy:
[input] skipping input as property serverURL has already been set.
[input] skipping input as property sarLocation has already been set.
[input] skipping input as property password has already been set.
[deployComposite] setting user/password..., user=weblogic
[deployComposite] Processing sar=../PartnerSupplierComposite/deploy/sca_PartnerSupplierComposite_rev1.0.jar
[deployComposite] Adding sar file - F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\bin\..\PartnerSupplierComposite\deploy\sca_PartnerSupplierComposite_rev1.0.jar
[deployComposite] INFO: Creating HTTP connection to host:localhost, port:7001
[deployComposite] INFO: Received HTTP response from the server, response code=200
[deployComposite] ---->Deploying composite success.
[delete] Deleting: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\PartnerSupplierComposite\bin\deployResult.dat
deploy-composite:
[echo] Deploying to http://localhost:7001/soa-infra/deployer
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
deploy:
[input] skipping input as property serverURL has already been set.
[input] skipping input as property sarLocation has already been set.
[input] skipping input as property password has already been set.
[deployComposite] setting user/password..., user=weblogic
[deployComposite] Processing sar=../OrderSDOComposite/deploy/sca_OrderSDOComposite_rev1.0.jar
[deployComposite] Adding sar file - F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\bin\..\OrderSDOComposite\deploy\sca_OrderSDOComposite_rev1.0.jar
[deployComposite] INFO: Creating HTTP connection to host:localhost, port:7001
[deployComposite] INFO: Received HTTP response from the server, response code=200
[deployComposite] ---->Deploying composite success.
[delete] Deleting: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\OrderSDOComposite\bin\deployResult.dat
deploy-composite:
attachplan:
[input] skipping input as property scac.sar has already been set.
[input] skipping input as property scac.plan has already been set.
[attachplan] attachPlan: Started for Composite SAR file = ../B2BX12OrderGateway/deploy/sca_B2BX12OrderGateway_rev1.0.jar using deploy plan = F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\bin/B2BX12OrderGateway_deployment_plan.xml
[attachplan] Load deployment plan file F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\bin/B2BX12OrderGateway_deployment_plan.xml
[attachplan] Done Load deployment plan file F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\bin/B2BX12OrderGateway_deployment_plan.xml
[attachplan] Unpacking the Composite SAR to tmp folder F:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\soaear_42498.tmp
[attachplan] Copy new plan file B2BX12OrderGateway_deployment_plan.xml to F:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\soaear_42498.tmp\soaconfigplan.xml
[attachplan] Repacking F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\bin\..\B2BX12OrderGateway\deploy\sca_B2BX12OrderGateway_rev1.0.jar file soaconfigplan.xml
[attachplan] Deleting tmp composite sar folder ...F:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\soaear_42498.tmp
[attachplan] Attach plan successful
[echo] Deploying to http://localhost:7001/soa-infra/deployer
[echo] oracle.home = F:\Oracle\Middleware\Jdeveloper\jdeveloper\
deploy:
[input] skipping input as property serverURL has already been set.
[input] skipping input as property sarLocation has already been set.
[input] skipping input as property password has already been set.
[deployComposite] setting user/password..., user=weblogic
[deployComposite] Processing sar=../B2BX12OrderGateway/deploy/sca_B2BX12OrderGateway_rev1.0.jar
[deployComposite] Adding sar file - F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\bin\..\B2BX12OrderGateway\deploy\sca_B2BX12OrderGateway_rev1.0.jar
[deployComposite] INFO: Creating HTTP connection to host:localhost, port:7001
[deployComposite] INFO: Received HTTP response from the server, response code=200
[deployComposite] ---->Deploying composite success.
[delete] Deleting: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\bin\deployResult.dat
importAndDeployB2BTradingAgreements:
[echo] Importing and deploying b2b trading partner agreements
[java] Commandline arguments 2: [import, ../config/OOW08_X12_10.zip]
[java] Import with overwrite=false
[java] *** Import operation completed successfully ***
[java] Time elapsed:7703ms
[java] Commandline arguments 1: [deploy]
[java] *** Deployment operation completed successfully ***
[java] Time elapsed:1500ms
[java] Commandline arguments 1: [restartb2b]
[java] Time elapsed:1094ms
[delete] Deleting: F:\stageFMW\DEMO_DOWNLOAD_HOME\11.1.1.6\CompositeServices\B2BX12OrderGateway\bin\jndi.properties
[echo] Wls home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\/../wlserver_10.3
[echo] Oracle home: F:\Oracle\Middleware\Jdeveloper\jdeveloper\

Which Backup server version is required for Sybase cumulative dump/load

Hello,
To perform cumulative dump and load (supported from ASE 15.7 SP100 and up) with 3rd party API, what backup server version is needed?
We use backup server API version 2.1, and sybackup.h does not have any definition for cumulative dump. This header file only defines DATABASE and TRANSACTION as command_type, so when "dump database foo cumulative" is issued, command_type becomes UNKNOWN.
Since we support all the ASE versions from 15.0.3 and up, we ideally need a backup server API that works for ASE versions from 15.0.3 and also works with cumulative backup. Is there such an API version?
Thanks,
Ali

What I'm told is that the version wasn't bumped because the changes shouldn't really affect the API functionality; the API module would still receive a byte stream and be able to store and return it regardless of the command_type.
However, you can easily modify your sybbackup.h to reflect the new command_types.
Replace the current command_type definitions with the following:
#define TRANSACTION 0 /* transaction log dump or load */
#define DATABASE 1 /* database dump or load */
#define CUMULATIVE 2 /* Cumulative dump to dump or load */
#define UNKNOWN 3 /* Pre-API SQL Server in use. Backup Server
                     has received a DUMP/LOAD command from a
                     SQL Server which is not passing the
                     'Command Type' toBackup Server. Therefore,
                     the Command type can not be determined. */
#define DELTA 4 /* Delta dump to dump or load */

Backup server desinging or deployment

Similar Messages

Maybe you are looking for