Backup the backup

I'm not sure if this is the correct group, but apologize in advance.
I have a 2TB external firewire disk unit for timemachine. It works great.
But if this disk unit wil stop working for some reason I have no backup anymore.
So I was thinking of creating a backup on a second location once every week. But just copying a near 1TB of files every week is not a very smart solution in my opinion.
There must be some easy way to make a backup every week with only the files that are added or changed.
I can't find such an option in time machine. Does it exist?
If not, what options are there for making smart backups on a second remote location.
Thanks
Andre

Most descent backup programs (and this includes CCC and Super Duper) have "smart backup" options, i.e., once the original stuff is on the backup, future backups will only update what has been changed and thus are relatively fast.

Similar Messages

I am trying to restore my catalog having previously done a back up to an external hard drive and subsequently an incremental backup. I am using Photoshop Elements 11 and the only option given in the restore procedure is to open a .tly file.

I have done this but now the restore function is asking for yet another file, which i assume to be the original back up, but that is the only .tly file since the only other relevant file appears to be called catalog.buc but that is just not visible when using the restore function? How do I continue from here with this restoration of my catalog?

Martin_Had a écrit:
Thank you Andaleeb. I appear to have an old backup of a year ago, and a more recent full back up plus an incremental backup.
Regrettably I don't really understand what is going on because firstly the restore does not complete its cycle so I cannot see what that backup file contains and secondly all I have read would suggest that the .tly file is the full backup and the catalog.buc file is the incremental backup. For the present, the catalog shows the photos for 2014 which makes me think I might have backed from the old back up file.
I am minded to create another catalog and try again.
Any views on what I can do?
A backup (full or incremental) is a folder, not a file. It contains renamed pictures file copies as well a copies of the files and subfolders of the original catalog. The catalog.buc is a renamed copy of the database of your original catalog while the backup.tly. That backup.tly file contains the information to restore the renamed pictures where you decide, the original location or a new custom one. You can't do anything with the backup yourself, only the restore process can do the job if it finds the backup.tly file. In the case of an incremental backup, you have to tell the restore process where to find the incremental backup folder; it finds the backup.tly file in that folder and finds what is to restore there; then it asks you for the previous backup folder (in your case the full backup); you then browse to that full backup folder so that the restore process can find find the backup.tly there; the restore then deals with the rest of the files to restore.

How can I restore an iPhoto library from Time Machine (ML) - when I TM doesn't see the backup??

Hi,
I recently did a Time Machine backup of my MacBook Pro (Mountain Lion) onto an external HDD. Around the time of the last backup, my system was behaving funny so I decided to rebuild the OS X.
Because the last TM backup was of a system that as mentioned, was somewhat 'unstable', and I only had a few backups available (didn't have TM running too long beforehand) - I decided not to use TM to 'restore' my system. I just did a clean install of ML and planned on pulling files over manually. I'd done this before and it worked a treat.
This time ran into a snag. The backup disk TM used was an external HDD which I wanted to upgrade (suffice to say it works fine). So, I needed to move the backup.backupdb directory to my other HDD. The copy seemed to work fine ... so far so good.
I installed the new ML OS on my MacBook Pro and that was fine too. I was able to pull most of my files over by going into the TM backup and copying what I needed.
BUT, for some reason, this didn't work for the iPhoto library?
Alas, I found that you need to do a 'restore' iPhoto library file from whithin TM. So I fired up TM and noticed that it didn't recognise the old backup file located on the HDD. I.e. when I turned on TM, pointed it to the external HDD (where I copied the previous backup to), it started a fresh backup.
So ... my question is - "How do I restore the iPhoto library if I can't get to it from TM?"
Thanks in advance to anyone that can help! The last 15 years of photos are stored in this library!

Hi ...
I've found a solution to my problem.
Time Machine locates extenal HDD backups differently depending if they were done via a network or via a USB/FireWire/Thunderbolt connection.
My initial backup was done via a direct Thunderbolt connection. I ran into the above issue b/c the second time when I tried looking for the backup file the HDD was conencted to my iMac and I was accessing it via a network conenction.
I simply connected the drive directly to my MacBook pro and ... voila. I was able to see the backup, select the iPhoto library and begin the restore.
Hope this helps.
BTW - I found this out by reading the 'blue box' selection on this page: http://pondini.org/TM/E2.html
(Thanks goes to Pondini!)

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

What happens if I click "delete backup" in order to delete the iCloud backups from my sisters phone off my device. Will it delete everything on her phone?

So a while ago when I got my phone I started a new Apple ID account/ iCloud.. Then when my sister got a new iphone I gave her my id to use too. In settings-general-usage it says that my storage is almost full. I then click on manage storage and it shows my phone and my sisters phone and how many gb or whatever. Also it says "last backup failed" and other stuff that's Irrelevant. Now when I click on my sisters phone I have an option to "delete backup" MY QUESTION is if I click the delete backup button will it just delete the iCloud backup off my phone OR will it totally delete everything involving the backup off my sisters phone forever??? Please help! Thank you so much!!!!!

Deleting a backup deletes the backup only from the iCloud storage, not anything on the iPhone.
The iPhone's iCloud backup will be updated at some point - automatically when the iPhone is connected to an available wi-fi network while connected to a power source unless the iCloud backup is turned off on the iPhone.

Can two computers use the same backup??

I restored a seperate Macbook pro from the Time machine backup of MY Macbook. So I have two computers operating from the same backup. Is that recommended??

Yes, it should do. Once you change the name of the computer make sure you reset TM
See A4 here. http://pondini.org/TM/Troubleshooting.html
When you start the backup it will create a new sparsebundle.. (like a virtual disk that holds the backup on network drives) and you will be able to check that it is correct because it should be a new full backup.
Then you can do a full backup of one of the machines.. the other machine can continue to use the original backup.

HT204053 I have one apple ID for purchases and then my mobile me ID where I use for email. So I have set my cloud with my mobile me name, while keeping my purchases the original name. Will my purchases be recognized as purchases when backup is finished.

I have one apple ID for purchases and then my mobile me ID where I use for email. So I have set my cloud with my mobile me name, while keeping my purchases the original name. Will my purchases be recognized as purchases when backup is finished.

Welcome to the Apple community.
So long as you are logged into the iTunes Store, using the correct ID and password (settings >store), then you will always have access to your apps, books, music, TV shows etc etc bought via the iTunes Store on that account.

I have an old email address that comes up when my IPad wants to backup. Can't remember the old password My new email is on my apple account but not on my iCloud. How can I change my ICloud email to my new one?

I have an old email address that pops up when I turn on my IPad and it wants to backup the ICloud. Can't remember the password for my old email so it won't back up. My new email is on my Apple account so that isn't a problem. how can I get my new email on the
I cloud account so I can back up my IPad?

settings->iclound and logout of the old appleID account

Any way to at a glance determine if the backup is done?

Does anyone knows if there is an indicator that tell you if the last backup completed (without digging into the drive or going to system/prefference/TM to see when the next backup is scheduled?
Would be nice if the ICON changed color or something.

You can also "right click" (i.e., CTRL-click) on Time Machine in the Dock to view its pop-up menu. If a backup is in progress, there will be a line that reads Stop Backup. If there is no backup in progress there will be a line that reads Back Up Now.

My family all use my iCloud account to backup their phones, meaning there is not enough space for me. How can we have seperate accounts without the risk of any of us having data/photos erased or lost?

Hi. We have 4 iPads and 3 iPhones in our household. I have my own apple ID which my whole family use. This was fine until IOS6 came out, and I found I wasn't able to back up my phone because the rest of my family have used all my iCloud storage! We've now decided we all want seperate IDs and seperate iCloud accounts, but we're worried if we delete iCloud from any of the devices that it will also delete our apps, pictures, data etc. Can someone guide me along the right path here?
Thanks
Carly

Yes....On each device, go under "Settings....iCloud" and DELETE ACCOUNT. This doesn't do anything to the data itself...it just "disconnects" that device from that particular account. Then each person/device can set up their own iCloud account for storage, backup, etc. As was mentioned above, everyone can maintain the same Apple ID for App Store to share music purchases and such, but make sure the different iCloud accounts exist when you go to restore something or you'll have someone else's stuff or a big mix of everybody's. Don't ask me how I know this.

Please HELP! My kid wiped my iPhone5 and I need to get my photos and videos off it! I have no backup with iTunes :(( Is there a way to scan the device manually?

hi,
New to this, so go easy on me. I recently got my first iDevice - an iPhone 5. I've used it for a month now and I have to say I love it.
But, I gave it to my kid this morning to look at. It was locked, so I assumed it was safe. WRONG. 5 mins later, I returned to him and my lovely iPhone5 was at the setup /pick your language screen! Looks like he entered the password incorrectly too many times and wiped it.
Now - I thought it would be fairly easy to recover the data and the apps - but it turns out this is not the case. I was never prompted to install iTunes and sync the device - not in the manual, not on the device when setting it up - so how was I to know that that would be my backup. I checked iCloud at a suggestion of an IT pal - nothing there, despite knowing that I had a Photo stream enabled. I may have disabled it only recently, but not sure if I can manually turn it on again?
Anyway - is there a way to manually scan my device and grab my all important photos and videos?
Cheers for any suggestions!

Hi Michela27,
Thanks for visiting Apple Support Communities.
If you have content on your iPhone that isn't on your computer, the best thing is to use the advice in this article to transfer it to your new computer before setting up sync:
iTunes: Transferring media from your iPhone, iPad, iPod touch, or iPod
http://support.apple.com/kb/HT1209
Cheers,
Jeremy

How do i find the password to unlock my iphone backup file for a new iphone?

I am trying to restore the back up files and music from my old iphone 3gs but when I plug in the new iphone 4 i got, It said i need a password to transfer the backup from the old phone to the new phone but I have no idea what that password would be... any ideas?

you are incorrect level 5, see this discussion https://discussions.apple.com/message/16368498#16368498

Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.

Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.

Sync with "new" computer
https://discussions.apple.com/docs/DOC-3141

Iphone and Ical on mac do not sync anymore. All my events are in the iphone calendar! How do I backup iphone calendar, and how do I fix the syncronizing problem?

After getting iCloud the iCal on my mac does not sync with my iPhone calendar. All of my calendar notes are in my iPhone (while the mac's Ical remains empty) so I need to backup the iphone version. How?
Itunes says that "your calendars are being syncronized with iphone using icloud" - but the mac's ical does not show any of the new events I have added on my iphone.
I would like to install the new update on my iphone, but I am afraid to do it without knowing that I will be able to restore my iphone calendar. I have made calendar events for many years to come, I and will not risk losing them!
I have been looking for tips online, but the solutions usually suggest that I backup the ical on the mac and start fresh using this version. In other words overwrite iphone calendar with the ical from the mac. Which is not an option. What can I do?

Moments in Photos are the new Events, i.e. groupings of photos sorted by date taken.
When the iPhoto Library was first migrated to Photos there was a folder created in the sidebar titled iPhoto Events and all migrated iPhoto Events (which are now Moments) are represented by an album in that folder. To open the sidebar if it's not already open use the Option+Command+S key combination.
There's a way to simulate events in Photos.
When new photos are imported into the Photos library go to the Last Import smart album, select all the photos and use the File ➙ New Album menu option or use the key combination Command+N. Name it as desired. It will appear just above the iPhoto Events folder where you can drag it into the iPhoto Events folder
When you click on the iPhoto Events folder you'll get a simulated iPhoto Events window.
The downside to the simulation is that the Albums/Events can only be sorted automatically by Title. But they can also be sorted manually, either in the sidebar or in the folder's window at the right.
Ask Apple for more sorting options in Photos via https://www.apple.com/feedback/photos.html.

How can i do a RMAN backup of my database from the network ?

i'm using oracle 8i.1.7.3 with win server 2003
i want to know how can i do a RMAN backup of my database (sever machine A) from the network.
i'd like to save the backup in another machine (the same LAN, the same OS ).
to do that i've mapped a logical device in my comptur (z):
when i run rman command i got this error:
channel ORA_DISK_1: starting piece 1 at .......
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command ON ORA_DISK_1 channel at .......
00
ORA-19504: failed TO CREATE file "\\remote\save\"
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 123) The filename, directory name, or volume label syntax is inco
rrect.

Hi,
ORA-19504: failed TO CREATE file "\\remote\save\"make sure you have created this directory and change it's ownership (chown command)to oracle.
also make sure that oracle user has permission to write to this direcotry (chmod command)
hope this helps
cheers, walrus

Mac Crashes in the middle of Time Capsule backup --HELP!

Been using time capsule for several months without any issues. In fact, it has been great until recently. A week or so ago, my MacBookPro began crashing in the middle of a time capsule back up. Just suddenly the MAC curtain comes down and tells me I must restart. When I restart I get an error message which I have copied into this message. I tried erasing a whole months worth of backups but still get the same problem........is it possible my MAC has gotten a virus?? Anyone who can help, your comments would be greatly appreciated!!!
Sun Jun 1 10:59:30 2008
panic(cpu 0 caller 0x0031678A): "btreeswapnode: about to write corrupt node!\n"@/SourceCache/xnu/xnu-1228.4.31/bsd/hfs/hfs_btreeio.c:197
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x34b0f918 : 0x12b0f7 (0x4581f4 0x34b0f94c 0x133230 0x0)
0x34b0f968 : 0x31678a (0x484588 0x92d6000 0x1 0x34b0fa40)
0x34b0f9a8 : 0x1fa244 (0x3054aa60 0x5c85004 0x0 0x0)
0x34b0fa68 : 0x1fb543 (0x0 0x0 0x200 0x0)
0x34b0fab8 : 0x3388b1 (0x4396e08 0x5c853b4 0x484261fc 0x2597b)
0x34b0fae8 : 0x325fa5 (0x5c85004 0x2 0x0 0x1)
0x34b0fc58 : 0x1f3097 (0x34b0fc78 0x5e26660 0x4 0xb52b9a4)
0x34b0fca8 : 0x1e2b5d (0x6354630 0x9361490 0x34b0fe2c 0xb52b9a4)
0x34b0ff78 : 0x3dcf13 (0xa8bec50 0xb52b8a0 0xb52b8e4 0x1)
0x34b0ffc8 : 0x19f1c3 (0x766b0e0 0x0 0x1a20b5 0x4b71480)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb0102578
BSD process name corresponding to current thread: backupd
Mac OS version:
9C7010
Kernel version:
Darwin Kernel Version 9.2.2: Tue Mar 4 21:17:34 PST 2008; root:xnu-1228.4.31~1/RELEASE_I386
System model name: MacBookPro4,1 (Mac-F42C89C8)

Steve --
Got this problem fixed. It seems the 10.5.3 update corrupted the update somehow. You can perform a disk image repair on the existing backup or just delete all your old back ups and start from scratch which is exactly what I did. Good luck!

Backup the backup

Similar Messages

Maybe you are looking for