Backup the Complete Guest Domain
Hi All,
What is the best way to backup the complete Guest Domain including the configuration and all, so that it can be migrated to another server.
Thanks in advance
The best way in my opinion is NOT to copy the guest domain.
instead just have the vdisk beck-end device be on a shared storage ( via san of nfs ) and then just use ldom migration to migrate the guest domain to another server
Ori
Similar Messages
-
Time Machine backup not completed because the "backup disk image"/Volumes/Data/MacBookAir.sparsebundle" is already in use. ??
Reboot the TC.. this is most common issue since Mountain Lion.
Look at the More Like This just on the right column. -
I am having issues watching certain podcast it says the operation couldn't be completed nsurlerror domain error 1013
Open the Mail, Contacts & Calendars preference pane in System Preferences, and select Facebook. Make a note of the settings for the account, then delete it from the list.
Then follow the instructions on this page: Resetting the SyncServices folder.
Log out, log back in, and recreate the account settings in System Preferences. See whether there's any improvement. -
I set up Time Machine yesterday (using a WD 2T drive) and got the message that the first backup was complete. I can open every file I try except Quicken and Turbotax. What am I doing wrong?
burgessiii22 wrote:
Thanks for the answer Linc, but how do I check to make sure the back-up process is working if I don't think I need to restore?
Create a test file with Text Edit (or any other program) and save it to your desktop.
Run Time Machine from the menu bar.
When the Time Machine icon in the menu bar stops spinning, drag your test file to the trash.
Open Time Machine and go back 1 page. You should see your test file on the desktop. -
After performing a complete restore of my Mac from a Time Machine volume, Time Machine wants to perform a full backup the next time it backs up.This is normal: http://support.apple.com/kb/TS1338
But I don't have enough free space on my external hard drive to do this because my external hard drive already contains one complete backup. My hard disc on my MacBook is 320 and my external drive is 500 GB, so it doesn't add up. I don't want to delete the original backup in case something goes wrong during the new full backup. What can I do?You don't have too many options. The best approach would be to buy a larger external drive. The guideline for Time Machine is that you should have 2-3 times as much capacity on the external drive as data you're backing up. See item 1 of Time Machine - Frequently Asked Questions. In any case, you can't prevent that first full backup unless you're willing to turn off Time Machine permanently.
-
Error "NOTICE: [0] disk access failed" during guest domain network booting
Hi,
Could you please tell me what is the problem with my configuration?
I created guest domain on my T1000 server.
As a disk I used disk from disk array: /dev/dsk/c0t18d0
I added disk using commands:
# ldm add-vdsdev /dev/dsk/c0t18d0 vol1@primary-vds0
# ldm add-vdisk vdisk1 vol1@primary-vds0 myldom1
# ldm set-variable auto-boot\?=false myldom1
# ldm set-variable boot-device=/virtual-devices@100/channel-devices@200/disk@0 myldom1
Then I logged to guest domain and booted from network to install OS from JumpStart server:
{0} ok boot net - install
Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: - install
Requesting Internet Address for 0:14:4f:f9:78:19
SunOS Release 5.10 Version Generic_137137-09 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Configuring devices.
NOTICE: [0] disk access failed.
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
ERROR: No disks found
- Check to make sure disks are cabled and powered up
Solaris installation program exited.
Configuration:
[root@gt1000a /]# ldm list-bindings
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- SP 4 2G 0.5% 2h 23m
MAC
00:14:4f:9f:71:4e
HOSTID
0x849f714e
VCPU
VID PID UTIL STRAND
0 0 5.3% 100%
1 1 0.5% 100%
2 2 0.5% 100%
3 3 0.4% 100%
MAU
ID CPUSET
0 (0, 1, 2, 3)
MEMORY
RA PA SIZE
0x8000000 0x8000000 2G
VARIABLES
keyboard-layout=US-English
IO
DEVICE PSEUDONYM OPTIONS
pci@780 bus_a
pci@7c0 bus_b
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
CLIENT PORT
myldom1@primary-vcc0 5000
VSW
NAME MAC NET-DEV DEVICE DEFAULT-VLAN-ID PVID VID MODE
primary-vsw0 00:14:4f:fa:ca:94 bge0 switch@0 1 1
PEER MAC PVID VID
vnet0@myldom1 00:14:4f:f9:78:19 1
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
primary-vds0 vol1 /dev/dsk/c0t18d0
CLIENT VOLUME
vdisk1@myldom1 vol1
VCONS
NAME SERVICE PORT
SP
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
myldom1 active -n---- 5000 12 2G 0.1% 2h 18m
MAC
00:14:4f:f9:e7:ae
HOSTID
0x84f9e7ae
VCPU
VID PID UTIL STRAND
0 4 0.5% 100%
1 5 0.0% 100%
2 6 0.0% 100%
3 7 0.0% 100%
4 8 0.0% 100%
5 9 0.0% 100%
6 10 0.0% 100%
7 11 0.0% 100%
8 12 0.0% 100%
9 13 0.0% 100%
10 14 0.0% 100%
11 15 0.0% 100%
MEMORY
RA PA SIZE
0x8000000 0x88000000 2G
VARIABLES
auto-boot?=false
boot-device=/virtual-devices@100/channel-devices@200/disk@0
NETWORK
NAME SERVICE DEVICE MAC MODE PVID VID
vnet0 primary-vsw0@primary network@0 00:14:4f:f9:78:19 1
PEER MAC MODE PVID VID
primary-vsw0@primary 00:14:4f:fa:ca:94 1
DISK
NAME VOLUME TOUT DEVICE SERVER MPGROUP
vdisk1 vol1@primary-vds0 disk@0 primary
VCONS
NAME SERVICE PORT
myldom1 primary-vcc0@primary 5000
[root@gt1000a /]#
Kind regards,
DanielIssue solved.
There was a wrong disk name:
primary-vds0 vol1 /dev/dsk/c0t18d0
I changed to c0t18d0s2 and now I sucessfuly installed OS from Jumpstart. -
Windows 7 users in my domain are unable to configure or change backup settings. Users are able to open Control Panel > Backup and Restore, but when they click
Change settings, they receive the error: Windows Backup - The backup application coud not start due to an internal error: You must be logged on as an administrator to perform this task. (0x8100000010).
The same error is received when executing sdclt.exe /configure at the command prompt, regardless of whether the command prompt is launched using "run as administrator".
I've done significant testing, and have been able to determine that the local administrator account is able to configure backups before the computer is joined to the domain. Once the computer is joined to the domain, the local administrator account
and domain users who are in the local administrators group are no longer able to configure backup and restore. Domain administrators are able to configure backups.
This is a new issue, which began occuring sometime in the last 2 months. 3 months ago, users were able to configure backups without issue, and those computers with backups configured are still able to run their backups and do restores; however the
settings can no longer be changed.
Clearly something in the domain is doing this, but Group Policy has not been altered, and I can find no setting that would be doing this in any case. Any help is appreciated.Hi,
So you mean you have tried different accounts in the local Administrator group and all of them failed?
If so, please check what group the local Administrator group belongs to? Does it belong to a group with limited privileges, such as the Guests group?
Tim Quan -
Volume as install disk for Guest Domain and Live Upgrade
Hi Folks,
I am new to LDOMs and have some questions - any pointers, examples would be much appreciated:
(1) With support for volumes to be used as whole disks added in LDOM release 1.0.3, can we export a whole LUN under either VERITAS DMP or mpxio control to guest domain and install Solaris on it ? Any gotchas or special config required to do this ?
(2) Can Solaris Live Upgrade be used with Guest LDOMs ? or is this ability limited to Control Domains ?
ThanksThe answer to your #1 question is YES.
Here's my mpxio enabled device.
non-STMS device name STMS device name
/dev/rdsk/c2t50060E8010029B33d16 /dev/rdsk/c4t4849544143484920373730313036373530303136d0
/dev/rdsk/c3t50060E8010029B37d16 /dev/rdsk/c4t4849544143484920373730313036373530303136d0
create the virtual disk using slice 2
ldm add-vdsdev /dev/dsk/c4t4849544143484920373730313036373530303136d0s2 77bootdisk@primary-vds01
add the virtual disk to the guest domain
ldm add-vdisk apps bootdisk@primary-vds01 ldom1
the virtual disk will be imprted as c0d0 which is the whole lun itself.
bind, start ldom 1 and install OS (i used jumpstart) and it partitioned the boot disk c0d0 as / 15GB, swap the remaining space (10GB)
when you run format, print command on both guest and primary domain on this disk you'll see the same slice/size information
Part Tag Flag Cylinders Size Blocks
0 root wm 543 - 1362 15.01GB (820/0/0) 31488000
1 swap wu 0 - 542 9.94GB (543/0/0) 20851200
2 backup wm 0 - 1362 24.96GB (1363/0/0) 52339200
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
I havent used DMP but HDLM (Hitachi Dynamic link manager) seems not supported by ldom as i cannot make it work :(
I have no answer on your next question unfortunately. -
Cannot join Windows XP machines to the Mac PDC domain
Frustrated...
Yesterday, I was able to successfully add 5 Windows XP machines to the Mac PDC Domain (lets call it xyz.lan). Those machines show up as valid computer accounts in Workgroup Mananger (PC1$, PC2$, etc.). Users are able to logon to those Windows XP machines using their Mac Open Directory user account and access their home folder, etc.
This morning, for some reason, I can no longer join XP machines to the Mac PDC domain. On both PCs I tried it with, I receive a "Insufficient System Resources exist to complete the requested service" on the Windows XP machine. I am using the diradmin user account and password to supply credentials. Same exact process as yesterday (which worked fine).
A couple things of note. I made sure the PDC domain is set to Enabled for allowing Guest Access and that WINS Registration is also enabled. Authentication is lso set for NTLMv2 and NTLM for enabled. I also tried rebooting the server this morning as well. It's running 10.5.4. This was not an upgrade from 10.4, but a fresh install of Leopard.
No changes were made on the server between yesterday and today that I am aware of.
Looking at the /var/log/samba/log.smbd log, there are thousands of entries for "This process has forked and you cannot use this corefunctionality process, You must EXEC()" etc... The log also shows failures when the XP machine tries to join to the domain. Log entries are listed showing, "pdbdefault_createuser: failed to add new account for 'PC6$'". Adding PC6$ manually via Workgroup Manager doesn't help either.
Any idea what to check next? I read so many varied things about Leopard and SMB not quite playing nice. People mentioning they had to go through all sorts of hurdles to get this working. Any advise is welcome.Any news about this? I'm having the same problem trying to join a Vista box to the domain. Here are the logs:
[2009/04/22 13:25:25, 0, pid=42167] /SourceCache/samba/samba-
187.8/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1571)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no
dsRecTypeStandard:Computers record for account 'VISTA-02$'[2009/04/22 13:25:25, 0, pid=42167]
/SourceCache/samba/samba-187.8/samba/source/passdb/pdbodsam.c:odssamgetgrnam(2040)
odssam_getgrnam gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Groups record for
'VISTA-02$'!
[2009/04/22 13:25:25, 0, pid=42167] /SourceCache/samba/samba-187.8/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1571)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Computers record for account 'VISTA-02$'
kDSStdAuthNewUser was successful for account "vista-02$"
kDSStdAuthNewUser accountid len(375)"0x49ef53056eb8a2630000009a00000214,1024 35
129849767195843988386717130686365750405143149807097035240997923637742337040903
506153973871003812041813
324419007326669993686871371821246150609561416487672279816850996014745064297496
041484464380321772803933500334864635264176672399865926313147079923364167109976
966344241501266923849093477
545323065093504527714303 [email protected]"
<CFArray 0x127bb0 [0xa087e1a0]>{type = mutable-small, count = 1, values = (
0 : <CFDictionary 0x10fa70 [0xa087e1a0]>{type = mutable, count = 3, capacity = 3, pairs = (
0 : <CFString 0x127230 [0xa087e1a0]>{contents = "dsAttrTypeStandard:RecordName"} = <CFArray 0x1273d0 [0xa087e1a0]>{type = mutable-small, count = 1, values = (
0 : <CFString 0x127830 [0xa087e1a0]>{contents = "passwordserver"}
1 : <CFString 0x12b1b0 [0xa087e1a0]>{contents = "dsAttrTypeStandard:PasswordServerLocation"} = <CFArray 0x1276e0 [0xa087e1a0]>{type = mutable-small, count = 1, values = (
0 : <CFString 0x128030 [0xa087e1a0]>{contents = "10.10.1.102"}
3 : <CFString 0x10b150 [0xa087e1a0]>{contents = "dsAttrTypeStandard:AppleMetaNodeLocation"} = <CFArray 0x127b60 [0xa087e1a0]>{type = mutable-small, count = 1, values = (
0 : <CFString 0x125b80 [0xa087e1a0]>{contents = "/LDAPv3/127.0.0.1"}
[2009/04/22 13:25:26, 0, pid=42167] /SourceCache/samba/samba-187.8/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1571)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Computers record for account 'VISTA-02$'
[2009/04/22 13:25:26, 1, pid=42167] /SourceCache/samba/samba-187.8/samba/source/passdb/pdbinterface.c:pdb_default_createuser(371)
pdbdefault_createuser: failed to add a new account for 'VISTA-02$'
[2009/04/22 13:25:30, 2, pid=42171] /SourceCache/samba/samba-187.8/samba/source/smbd/reply.c:reply_special(328)
netbios connect: name1=10.10.1.102 name2=MYMAC
[2009/04/22 13:25:30, 2, pid=42171] /SourceCache/samba/samba-187.8/samba/source/smbd/reply.c:reply_special(335)
netbios connect: local=10.10.1.102 remote=mymac, name type = 0
[2009/04/22 13:25:30, 2, pid=42171] /SourceCache/samba/samba-187.8/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/auth/odsam.dylib' loaded
Thanks!
Message was edited by: capc -
When I first imported music from my CDs onto my iTunes library, all the songs appeared, but those with the album artist and guest/additional artists they appeared in their own album under the same album name. After searching through iTunes help and support, I learned how to put all the songs under the same album (part of a compalition) and add the additional songs information, artwork, lyrics, etc. After getting all the music (imported from my CDs) onto the iTunes library and in their album. I synced my music onto my iPhone. (My iPhone is a 3GS)
Once the music was on my iPhone i noticed that the albums appeared in 2s again. One was the complete album with all the songs, song info, etc. together (solo tracks and/or one with multiple artists) and another album of the same name, artwork, etc. with 2-4 of the songs from that album. Since all I saw need for was to have the completed album on my iPhone, I deleted the album with only 2-4 of the songs. When I went back and selected the completed album, all the songs I had deleted from the incomplete album were also deleted from the completed album too! I just couldn't figure out why it did that and my my friends with iPods and iPhones said they didn't know what caused it either. So now I'm here with the idea how to fix this problem.
If anyone has a solution to this problem, please reply. It will be greatly appreciated.I'm not sure why this happens, but I found a workaround. Below the album title it will list the artist(s). The issue seems to happen when there are multiple artists. For example, an Album titled "Over the Sea to Skye" has The Chieftains and James Galway as artists. Some tracks (for whatever reason) will list only one of these and result in the playlist showing what appears to be multiple albums. You can click on the artists and it will highlight. Paste in what is appearing on the other "albums" and it will then show as one:
Hope that is somewhat clear enough to help. Doesn't fix whatever the issue is but it is a workaround. For me this is only happening with CD's that I have imported. -
Backups arent completing with error cant find folder or it does not exist
Hello,
Lenovo X1 Carbon, windows 7 pro 64bit. Core i5, 8GB RAM, 256 GB SSD. No DVD player. 500 GB External USB 3.0 Hard drive.
My backups aren't completing while using Windows Backup and Restore (WBaR). It says it can't find a folder that doesn't exist on a drive that doesn't exist(e.g. 'D:\X1\Desktop\folder_name') I have a ultrabook from Lenovo, there is no D: drive. there
is the C: Drive and the Lenovo Recovery drive (Q:). However, the folder name matches a folder that WAS on my desktop ('C:\[USER]\Desktop\folder_name')the first time that I used WBaR.
At first, I thought it was that folder, so I moved it to the Recycle bin. Then I tried moving it to a documents folder. Same error. So, then I thought it had to do with Carbonite and Dropbox. So I turned both of them off. No joy.
I tried searching for a folder named X1 using the command line. No luck.
I found this support article at http://support.microsoft.com/kb/979281, but none of these scenarios match mine. I have exhaustively searched for someone who had a problem with a Drive letter being assigned to Windows backup that doesn't exist on their
computer. But no joy.
Can anyone help me? I don't think this is serious, but it is annoying, since WBaR doesn't list when my last backup was because of the problem. Plus, I'm worried about whether it will work when I need to recover files.
Original title
"Windows Backup skipped D:\X1\Desktop\[folder] because it cannot be found on drive D:\." Drive D doesn't existHi,
Please turn off backup and turn on to relocate the backup place as your USB drive.
As I known, it's impossible to backup the files on the same partition, so C drive is system drive and impossible for your backup.
Post back your event log related to this issue here for our research.
Kate Li
TechNet Community Support -
Guest domain obp alias changed after upgrade to 1.0.3
Hello all,
Recently upgraded from 1.0.1 to 1.0.3 (and firmware to 6.6.5) using the procedure at http://blogs.sun.com/jbeloro/entry/upgrading_from_ldoms_1_0. I found that my boot-device setting on all guest domains no longer worked. They were set to "boot-device=vdisk" however after the upgrade to 1.0.3 vdisk was no longer a valid device alias in the obp of the guest domain. The other device aliases (vdisk0, disk) were there and they worked fine. Anyone else seen this? Solution was simply to change the boot-device setting but I'm curious on the "why". Details below.
Ldom primary domain
$ uname -a
SunOS isdsyddev13 5.10 Generic_137111-03 sun4v sparc SUNW,Sun-Fire-T200
$ cat /etc/release
Solaris 10 6/06 s10s_u2wos_09a SPARC
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 09 June 2006
$ prtconf -V
OBP 4.25.9 2007/08/23 14:17
Guest domain setup :
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
itgsyddev57 inactive ----- 1 1G
VARIABLES
auto-boot?=false
boot-device=vdisk
NETWORK
NAME SERVICE DEVICE MAC
vnet0 primary-vsw0 00:14:4f:f9:61:83
DISK
NAME VOLUME TOUT DEVICE SERVER
Guest domain devalias output post upgrade
ok devalias
vdisk0 /virtual-devices@100/channel-devices@200/disk@0
vnet0 /virtual-devices@100/channel-devices@200/network@0
net /virtual-devices@100/channel-devices@200/network@0
disk /virtual-devices@100/channel-devices@200/disk@0
virtual-console /virtual-devices/console@1
name aliases
I don't have a pre upgrade devalias output but I do have the output from an eeprom command...
root@itgsyddev57# grep boot-device eeprom.out
boot-device=vdisk
Thanks.
Edited by: paebersold on Sep 23, 2008 9:45 PMI think this because with LDoms 1.0.3, devalias are automatically created using names
you used to define your vdisk. So after the upgrade, devalias have probably been
wiped out and replaced with the ones automatically generated. -
Cannot Print. "The Active Directory Domain Services is currently unavailable"
Hi there
I cannot print and I have not been able to find the fix via existing forum threads.
System:
Win 7 Ultimate 64 bit German - Profile language is Danish (installed a week ago and completely windows updated)
Office 365 Small Business Premium
HP DV8 Laptop. i7, 512GB SSD, 8GB RAM
HP LaserJet P1006 USB printer.
Problem
No matter if I try to print from IE, Notebook, Word 2013 or anything else, I cannot chose my printer (P1006).
If I try to Add Printer in Word 2013, I get the "The Active Directory Domain Services is currently unavailable" error.
In Devices and Printers, the P1006 is visible, but there is no driver installed.
Trying to install the correct driver:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3435683&prodTypeId=18972&prodSeriesId=3435682&swLang=8&taskId=135&swEnvOID=4063
only creates a general error during installation: "Printer Software Installer has stopped working - A problem has caused the program to stop working correctly. Windows closes the program and will notify you if a solution has been found"
I have tried all the solution software from Windows, from HP (for the laptop and for the printer) - but nothing comes up with any details or suggestions.
What should I try?
Absolutely everything else works perfectly on the system.
Reffered here via http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/cannot-print-the-active-directory-domain-services/1cf47626-a2cd-4b7a-94b6-10cbc8ab02b0Hi,
I suggest you try the following:
1. Try the steps in the following article:
Troubleshoot printer problems
http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems
Fix printing problems by resetting the print spooler
http://support.microsoft.com/kb/2000007
2. Let us try updating the printer driver which might help you in resolving the issue.
Click on the link below for more information on updating the printer drivers.
Find and install printer drivers
http://windows.microsoft.com/en-US/windows-vista/Find-and-install-printer-drivers
3. Remove the printer and add it again:
Go to Control Panel
Select Printers
Right-click on Add Printer
Select Run as Administrator
Now try to add your network printer
Also a thread for your reference:
Error message when attempting to print: Active Directory Domain Service is Currently Unavailable
http://social.technet.microsoft.com/Forums/en-US/winserverprint/thread/d6212275-24d6-4168-830a-9441f861cb76
Hope this helps.
Vincent Wang
TechNet Community Support -
Does anyone know how to fix 'itunes could not backup the iphone an error occurred'?
Tried absolutely everything suggested to remedy this very annoying Iphone 4s backup problem, wish Apple would just get round to fixing the problem that a lot of people seem to have for some time now, 'iTunes could not backup the iPhone because an error occurred' refuse to part with £25.00 to be told they don't know how to fix or they are not aware of the problem being so talked about on their support communities. Please please help, its been 4 months now and I have tried absolutely everything out there.
You really tried EVERYTHING in that article? I'm impressed, it's a long list.
The most common cause is a currupt current backup. Deleting the current backup should fix it if that's the problem. You need to delete it in iTunes Preferences, Devices tab. But with Windows unfortunately that isn't always enough. You need to use Windows Explorer to make sure the backup is completely gone, as the system call that deletes a folder sometimes fails to delete it completely. So open Explorer and make sure it's gone, and if it isn't delete it using Windows. The location is:
Windows Vista and Windows 7/8: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.
There have also been reports that some apps prevent the backup from completing, probably because they create files that the backup program doesn't recognize. The most common offender reported is iZip. -
I can only backup the datafiles but not the control files and SPFiles
Hello, all,
I am using the Oracle 10g on a linux server which runs redhat 9. I want to backup the whole database to the disk, but not the flash recovery area. It is /rawdata. I will show how I configure the backup part in EM. Is there anything wrong?
1. the ARCHIVELOG is on
2. under Administration, in the All Initialization Parameters, I remove the string value of “log_archive_dest_1”. After that, I go to the SPFile and remove the string value of “log_archive_dest_1”
3. configure backup settings and policies. The Disk Backup Location field is set to /rawdata. Select Image Copy for Disk Backup type. Test Disk backup is successful.
4. go to Policy page. Select “Automatically backup the control file and server parameter file (SPFile) with every backup and database structural change.) input /rawdata into the filed: Autobackup Disk Location
Select “Optimize the whole database backup by skipping unchanged files such as read-only and offline datafiles that have been backed up”
Select “Retain backups that are necessary for a recovery to any time whin the specified number of days (point-in-time recovery)
Accept the default of 31days
5. go to Schedul Backup
6. select customized from the backup Strategy drop-down menu. Select the Whole Database
7. in the Options page, select “Full backup” in the Backup Type section. Select “Online Backup” in the Backup Mode section. Select “back up all archived logs on disk” in the Advanced section.
8. in the Setting page, select “Disk”
9. in the Schedule page, accept the default job name and description. Select Immediately to execute the job immediately.
10. just submit the job.
After several minutes, the job is failed while the Prebackup and Postbackup are succeeded. The log says:
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: ORCL10G (DBID=770753237)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 11-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=268 devtype=DISK
channel ORA_DISK_1: starting datafile copy
input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_68hvin50 tag=BACKUP_ORCL10G_000_101106111844 recid=108 stamp=603544772
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_69hvin6d tag=BACKUP_ORCL10G_000_101106111844 recid=109 stamp=603544813
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ahvin7g tag=BACKUP_ORCL10G_000_101106111844 recid=110 stamp=603544829
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
channel ORA_DISK_1: starting datafile copy
input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6bhvin7v tag=BACKUP_ORCL10G_000_101106111844 recid=111 stamp=603544835
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:08
channel ORA_DISK_1: starting datafile copy
input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6chvin87 tag=BACKUP_ORCL10G_000_101106111844 recid=112 stamp=603544841
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 11-OCT-06
Starting Control File and SPFILE Autobackup at 11-OCT-06
piece handle=/rawdata/c-770753237-20061011-05 comment=NONE
Finished Control File and SPFILE Autobackup at 11-OCT-06
RMAN>
Starting backup at 11-OCT-06
current log archived
using channel ORA_DISK_1
archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 1062
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/11/2006 11:20:54
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
RMAN>
Recovery Manager complete.
It seems the system tries to find a file “arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270” in /rawdata. I just can not understand.
What should I do? Any advice is highly appreciated!
Qianthe string value in the field of 'log_archive_dest_1" under "All Initialization parameters" is "LOCATION=+DATADG/orcl10g/". The same value was in the field under SPFile.
I reset these values and tried to backup the whole database. The same error appeared. The log says:
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: ORCL10G (DBID=770753237)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 11-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=245 devtype=DISK
channel ORA_DISK_1: starting datafile copy
input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_6ghvj9rd tag=BACKUP_ORCL10G_000_101106043753 recid=114 stamp=603563922
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_6hhvj9sq tag=BACKUP_ORCL10G_000_101106043753 recid=115 stamp=603563963
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ihvj9tu tag=BACKUP_ORCL10G_000_101106043753 recid=116 stamp=603563977
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
channel ORA_DISK_1: starting datafile copy
input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6jhvj9ud tag=BACKUP_ORCL10G_000_101106043753 recid=117 stamp=603563984
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:07
channel ORA_DISK_1: starting datafile copy
input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6khvj9uk tag=BACKUP_ORCL10G_000_101106043753 recid=118 stamp=603563990
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 11-OCT-06
Starting Control File and SPFILE Autobackup at 11-OCT-06
piece handle=/rawdata/c-770753237-20061011-07 comment=NONE
Finished Control File and SPFILE Autobackup at 11-OCT-06
RMAN>
Starting backup at 11-OCT-06
current log archived
using channel ORA_DISK_1
archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 1062
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/11/2006 16:40:05
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
RMAN>
Recovery Manager complete.
Why the system keeps trying to find files under /rawdata? It is the destination, not the source.
Any help is appreciated!
Qian
Message was edited by:
QianChen
Maybe you are looking for
-
Excel Crashes every time Software Protection Service initialises.
Hello, I was wondering if I could get some help. I have an issue whereby Excel 2013 seems to crash what seems like randomly, however when I look in the event log it seems to be every time the Software Protection Service initialises while Excel is run
-
Hi, I'm a student doing my master thesis and I need to use Imaris. I asked to BitPlane for a evaluation copy, but it crashes a few seconds after opening (i can only see the interface). I've tried to reinstall it several times, and to update everithin
-
Download "TRT_Send_Jython_HTML_Email"
could you please share download link? for "TRT_Send_Jython_HTML_Email" thank you
-
Is there any way for me to update further or is it something I'll have to purchase? I'm willing to purchase further updates, just not sure how.
-
Where can I get help on issues related to Adobe AIR?
First, please be sure to review the Adobe Air release notes to determine whether the issue you're experiencing is a known one. Second, try searching for a resolution to your issue in on our Tech Notes page. Next, search the Adobe AIR forum to see if