Backup to Maxtor USB Drive

I am attempting to backup my iMac using SuperDuper to a Maxstor USB Drive. The drive was formatted with the Windows NTFS file system and contains backups from 2 Windows computers.
When I look at the info for the device, for Ownership & Permissions it says "You can only read". There are no other options. How can I change the permissions?

Hi tangoloco,
the problem are not the permissions, but the fact that OSX is not capable to write to disks with the NTFS file system.
OSX can only read NTFS.
If you want/need interchangeabillty between PCs and Macs, you can either change the external drive to FAT32 file system, which OSX can read and write, or consider using MacFuse http://code.google.com/p/macfuse/
But I'm not sure, if SuperDuper works in conjunction with MacFuse (never tried that).
Another possible way is to repartition your external drive with two partitions, one with OSX and one with NTFS or FAT32.
Regards
Stefan

Similar Messages

Can I turn off Macbook while Time Capsule is archiving Time Machine backup to a USB drive?

My Time Capsule is archiving my Time Machine backup to a USB drive attached to it. I have initiated this process on my macbook (on the same lan with the Time Capsule), on which I am monitoring the archiving progress on the Airport Utility. Still almost a couple of days to go... Can I turn off my Macbook, or will that interrupt the process of archiving?

If LaPastenague is willing to do a "test", then we will all know more.
Opened my big mouth.
The archive is happening.. I turned off the computer it was setup from.. running Mavericks and latest utility once I got it started. I have been checking from v6 utility on Mountain Lion.. and it is excruciatingly slow. But is running.
I can check the progress but v6 utility is utterly and completely useless.. it continually shows the same numbers.
v5 utility does show it is crawling along.
v6
20min later..
Look, look, there is a tiny blue fleck in the progress bar!!
v5 utility shows the actual progress. Actually tells you total and amount backed up so far.
Amazing how advanced v5 utility is over v6.
The estimate of 10hours is probably correct at the present rate of progress. I suppose for 500GB, around 50GB/hr is about what we expect from TM backups etc.
I will post another picture in an hour and probably kill it then before I die of watching paint dry.

How to copy a networked TimeMachine backup to a USB drive and restore from it?

Hi,
I backup my MacBook Air with TimeMachine to my QNAP NAS which offers a TimeMachine backup service and I can restore data from it OK.
Working in IT, and being a bit paranoid about important data loss, I am concerned that if I was robbed or my house burnt down I would most likely lose both the MacBook and the TimeMachine Backup on my NAS :-(
To protect against this I have backup my (linux based) NAS to an external drive that I keep offsite. This drive is encrypted to keep my data secure with a Linux form of encryption (cryptsetup) and hence can't be plugged into a MacBook to try and restore from it - I doubt this would work either as the TimeMachine data is not located in the root of the drive.
So what I have done to test my restore process is to mount the encrypted NAS backup that include the TimeMachine backup folders on a Linux machine and then copy the TimeMachine data to the root of an HFS+ formatted external USB drive.
But, now I am stuck as how to try and restore something from this to my MacBook to see if the copy of the TimeMachine backup is good. If I press the Alt key on the TimeMachine icon, I can select an alternate backup device and when I enter TimeMachine to browse the data, I can browse the structure but there is no option to go back in time !! It seems like it is not possible to restore from this copy of the TimeMachine backup.
Does anyone know if this should be possible, and if so, what am I doing wrong here?
Rgds
Gary

For anyone else that may be in a similar situation, I can confirm that this does actually work.
I am unsure why I was not able to mount the original sparseimage that I copied to the USB drive before, but I have gone through the entire process again and I could successfully mount the TM sparseimage onto my MacBook and restore files from within it using TimeMachine to my Mac.
This is a Disaster Recovery solution only needed for if both my NAS and Macbook get stolen or damaged so I am happy with this solution for now.
I will try the restore process several more times from my monthly backups to reassure myself that the first failure to mount the sparse image was an anomaly.
This is the process that I have tested:
Configure MacBook to backup to TimeMachine Service running on QNAP NAS device.
Perform regular backup of QNAP NAS Device (Linux) including the TimeMachine backup data to an external USB drive with encryption enabled and store this device safely off-site
In time of loss of both NAS and MacBook, Time Machine data can be recovered to another Mac without the need of the NAS using the following process:
Mount the external drive containing the backup of the NAS filesystem (ext4) which is encrypted onto a Linux host so it is readable - use the cryptsetup luksOpen options to access the encrypted filesystem then mount it.
Mount a n empty HFS+ formatted USB drive on the Linux host
Use Rsync to copy the sparsebundle from the external NAS drive backup disk to the root of the USB Drive
Insert the HFS+ formatted USB containing the sparesbundle into the Mac's USB port
Double click the sparsebundle to mount it onto the Mac as a Volume
Using Alt button and the TimeMachine icon, select use alternative backup disk and you should see the TM backup in the sparsebundle
Enter TimeMachine and you should be able to restore any/all files
Hope that helps someone else and thanks to LaPastenague for pointing me in the direction of some of the answers I needed.
Rgds
Gary

Can I perform a Time Machine backup to a USB drive connected to the Time Capsule 3TB

I would like to perform Time Machine backups to a portable USB drive, to use as an off-site backup copy. However, when I plug the drive into the Time Capsule (3TB) it isn't seen by Time Machine from any of the computers on my network. What do I need to do to make this work?

I'm not sure about whether Time Machine can include a drive that is a month out of date in a normal rotation.
This won't be a "normal" rotation. Assuming that you have already configured Time Machine on each Mac to back up to the USB drive, when you connect the drive to the Time Capsule, you will need to manually click Backup Now on a Mac to get the backup started. Then, do the same with other Macs that you want to back up.
You could wait and see if Time Machine will start to back up on its own, but the wait would be unpredictable as far as time was concerned.
Time Machine will also spend a good deal more time in the "Preparing" stage since it will have to look a month of history on the Mac since the last backup.
It is set up and recognized in the Airport utility, and mounts normally. I can see the files using finder, but I can't get Time Machine to recognize that it is there and available for backups.
So, if you open System Preferences on a Mac,
Then, open Time Machine
Click Add or Remove Disk
The USB drive doe not appear as a potential destination?
Have you restarted both the Mac and the Time Capsule?
Any recent changes to the Mac.....like installing a new operating system?

Can I backup to a USB drive connected to my Time Capsule?

I can't seem to find much documentation on what the USB port on the Time Capsule is for. I see it's useful for attaching printers and external hard drives. But if I connect a USB hard drive, can I run Time Machine and then pick either the Time Capsule drive or the USB drive to back up to?
Will I be able to backup wirelessly from my MacBook Pro?
Can I then also backup wired to my ethernet-connected iMac (at a faster speed) ?
In other words, the TIme Capsule is capable of automatically backing up both wired and wirelessly, right?

dougkramer wrote:
... if I connect a USB hard drive, can I run Time Machine and then pick either the Time Capsule drive or the USB drive to back up to?
see this user tip: http://web.me.com/pondini/Time_Machine/2.html
Will I be able to backup wirelessly from my MacBook Pro?
yes. however, it is recommended that the initial backup is done using a hardwired connection.
Can I then also backup wired to my ethernet-connected iMac (at a faster speed) ?
see above
In other words, the TIme Capsule is capable of automatically backing up both wired and wirelessly, right?
yes.
JGG

Can Time Machine backup to two USB drives

Hi,
I have an iMac 250 gig drive with about 240 gig in use and own 2 250 gig USB external drives. One of which I am currently using for Time Machine to backup to, but that is now full. I was wondering if there is any way that I can have time machine make use of both external USB drives as target backup drives?
I'm guessing I need to buy a much larger USB drive, but wanted to explore this option first.
Thanks,
Kyle

No. TM can only backup to a single drive at one time. You can designate the second drive as a new TM backup drive, but then TM will do a completely new backup to that drive, not "add on" from the old backup.
There really isn't any backup utility for the Mac that will span backups over multiple hard drives except possibly Retrospect.

Airport Extreme and Time Machine backups using a USB drive

Hi there,
I checked through the threads/FAQ's for an answer to this but couldn't find anything...
I have an AE set up with a USB drive attached as my Time Machine backup drive. When I start my MBP up and initiate a forced backup, Time Machine will go and find my drive (via the AE), mount it and carry out the backup without a problem. However, if I start my MBP up and wait for the scheduled hourly backup, TM doesn't see the drive (or perform the backup) unless I go and manually mount the drive first.
I realise I can put the drive in my login items to auto mount on boot but I wondered if there was a way to get the scheduled backups to work without doing this (as with the forced backups).
Thanks

mattschenker wrote:
Pondini,
Actually, I wasn't thinking about theft. I was just thinking that for security in a possible data-loss "event," it was better to have the backup drive physically separated from the main computer. But maybe that's not necessary.
That's unlikely. A power surge could take out both your Mac and connected external HD. You do have your Macs on good surge protectors or, better yet, U.P.S. systems, right? If not, see [Using a U.P.S. System with a Mac|http://web.me.com/pondini/AppleTips/UPS.html].
But wherever the external HD is, unless it's on a surge protector or U.P.S., it's still exposed.
Other things causing data loss are even less likely to affect your Time Machine drive (especially if there's no other data on it).
Yes, I could hook something up to my Mac Mini. Good point! And that would really keep it separated, since it would be in an entirely different floor. But then again, Time Machine backups done wirelessly would probably take forever.
The first one, yes. But if you have a good WIFI connection, subsequent ones shouldn't take too long or be too obtrusive, except when you've updated a lot of data (like installing an OSX update).
See #22 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for setup instructions.
But this just shows that there are a lot of options.
Yes.
I do wish Apple would solve the problem of Time Machine working via the Airport Extreme. That would be my favorite option.
Not likely. Time Machine's been out since Leopard, about 3 years, and backups via an Extreme have never been reliable or supported. Just why they work well on a Time Capsule, or even a USB drive connected to a TC, but not an Airport, is a mystery, but that's the way it is.
But it's always a good idea to keep secondary backups. See #27 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for some suggestions.

Backup iTunes to USB drive?

I'm sure this has been asked but is there any reason why iTunes does not have a backup to HD option rather than the DVD/CD route? I know about manual copying however surely there must be plans to include this feature in future builds?
Anyone got any ideas if this happening?
Cheers
Neil

Just copy them all back. The "iTunes Library" file in the iTunes folder tells iTunes what is in the library, and it also carries all the relevant data about ratings, playcounts, etc.

Can Time Machine backup USB Drive connected to Airport Extreme Base Station

I need a new N based wireless router. I would prefer to get just the $179 Base Station and not the $299 Time Capsule. I already have a nice external USB 500GB drive that I would connect to the AEBS. So, once I have this new wireless router/base station installed at home and I have the external USB drive connected to it, can my new Macbook Air with a USB connected 400GB drive be used to backup what is on the Macbook Air and also backup the 500GB USB drive info that is connected to the extreme base station?
Thanks
tj

I found this when searching Apple's web site but it is old, October 2007, and said it could not be done. Has this changed since then?
Here is what I found.
Mac OS X 10.5: Time Machine doesn't back up to AirPort Disks
* Last Modified on: October 26, 2007
* Article: 306833
Time Machine in Mac OS X 10.5 Leopard can be used to back up to many kinds of Mac OS Extended-formatted drives, but it does not support AirPort Extreme's AirPort Disk feature.
Time Machine can back up to another Mac running Leopard with Personal File Sharing, or to a Leopard Server volume, or an Xsan storage device.

What is the best way to backup a 1 Terabyte external USB drive?

In order to keep my MacBook Air running speedily along and to free up space, I use this strategy to store my iTunes Library on an external USB drive.
I'm trying to think of the best way to backup a 1 Terabyte external USB drive. I'm told the hardware has a product life of about five years and some say to burn DVD-R discs of it as a backup, but that would require many discs.
Has anyone explored the viability of using FTP in conjunction with AWS (Amazon Web Services) to backup the iTunes Library to the cloud? Their file storage is quite cheap.
Any thoughts on the most effective way to backup an external USB drive?
Thanks!
AB

For a simple clone use Disk Utility's Restore option:
Clone using Restore Option of Disk Utility
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Others will suggest using Carbon Copy Cloner or SuperDuper!.

Backup Fails to Work "not enough disk space" C:55GB In Use, E:(USB Drive) 233GB Free

T61, 2GB RAM, C: 100GB Drive, E: 320GB USB Drive, Windows Vista Home Premium
A month ago I started getting message "Rescue and Recovery does not have enough disk space to perform the requested operation" when attempting a backup from C: to E: (USB Drive).  Ran diagnostics on C:, D: and USB Ports and all passed
C: 86.76GB Total   E: 298GB
    31.99GB   Free        233GB
Not sure how to resolve issue, should be plenty of space to do backup.

I've had the same problem on a T60p and on a W500. I have been able to get RnR going again by deleting several of the backups on the USB drive and then backing up again. This puts my system at risk because I have no backup while doing this procedure. Now recently RnR has been telling me there is not enough space to delete any of the backups. So I'm limping along by growing the number of backups RnR is configured to keep but I'll eventually run out of space on my USB drive.
Did you ever get any support or find a solution?
I'm getting to the point where the amount of space in use on my C: drive is about equal to the free space on my USB drive. I'm up to around 12 backups and eventually my USB drive really will have insufficient space.

Rescue and Recovery Not Finding Backups On USB Drive During Restore

Currently running Windows 7 Pro 64-bit on a W510. Rescue and Recovery cannot find my backups on the USB drive when trying to restore. They can be seen when not in restore mode. There are two partitions on the USB drive. The second contains the backups. I also tried plugging the drive into a server to access it as a network drive with the same result. R&R version 4.30.0025.00. I do not believe it has changed since I started the backups.
Solved!
Go to Solution.

Just a think, I'm pretty sure is about your version of R&R. Just between R&R4.30 and 4.31 is not compatible.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Rescue and Recover create backup on usb drive failed

Dear all, I am very new to the backup software. After browsing through the forum for what I can do with the recovery and rescue process, I decide to follow the standard procedure. My notebook is T61 with vista home basic. I did not change any partition configuration or mess up the factory settings. The only thing I did is to update the Think Valtage package to the latest version. For R&R, it is 4.21. I burned the set of recovery disc (1 cd + 3 dvd) and the rescue disc (1 cd). All went very well. Then I started to create a base backup, the destination drive is a Seagate usb drive. Shortly I started the backup process, I received 5 to 6 dialog box stating some file could not be copied from z drive, I just clicked OK for each. Then I was presented a dialog box stating that the operation was canneled. So the backup cannot proceed.
I again checked the forum and figured out the z dirve should be the hidden service partition. But I did not change any partition settings or reinstall the OS, how come some files were not there? Anyone encounted the same problem before?
I got another question. Some posts mentioned when the RnR did the first backup on an usb drive, it will ask whether the drive is set to bootable (although I did not see this step myself). May I know what is the difference between making the usb drive bootable or non-bootable? Since I have got data on my usb drive and did not want to repeat the data copying again, can I choose the non-bootable? If in the future I need to restore a backup, I plan to boot the notebook with rescue cd and then restore from the usb backup. Is this possible?

I don't think the failure is due to usb drive file permission. I reached this conclusion based on 2 observations,
1. The 5 or 6 dialog box which contains the error states very clearly a message like that z:\preboot\xxx cannot be found, where z is the hidden service partition
2. Althouth the backup was cancelled shortly after launching, it did create some files and folders on the usb drive (D drive), they are
d:\boot
d:\preboot
d:\bootmgr
d:\copyfile
where boot and preboot are folders and there are some files inside. The copyfile is a script file, if opened in notepad, I can see that the lines indicate copying files from z:\boot to D:\boot, from z:\preboot to D:\preboot, etc.
It seemed that certain files in z:\boot and z:\preboot cannot be found and they are so critical that backup will not continue without them.

I want to backup an external hard drive connected with time capsule

What to do? I want a macbook air but realise that the storage is limited. I want to have en external HDD connected through time capsule or similar to access storage "wirelessly". I want everything backed up automatically through time capsule. I understand time capsule does not back up connected external HDDs unfortunately. If it did my problem would be solved. How should I do? Can a two time capsule solution be possible where one is used för storage and the other for time machine also backing up time capsule nr 1?
I do not want to loose all my photos! They won´t fit a macbook air... I have tried "crash plan" wich is one of many ckoud solutions to try and take care of all my hundreds of GBs but it doesn´t work well. Takes forever to backup and it keeps loosing contact with the external HDD i have connected through the time capsule.
This must be a very common need but I find no good solutions?!
Thanks!

You are right.. there is no decent solution from Apple..
You need a proper NAS.. not a backup target for TM.. which is what the TC is.
Look at Synology and QNAP.. they are not cheap but will work fine with Macs, TM even although it can be messy setting up. But the real NAS will auto backup to a USB drive.. plus the raid system offers protection against a dead drive.
Some people use a Mac Mini as a server.. (you don't need server version OS on it).. but the disk expansion is going to cost you as much as the true NAS.

Cannot mount external USB drive with FDisk_partition_scheme

Due to some recent mac issues in my lab, we updated one of the computers to Maverick 10.9.4 from Snow Leopard 10.6.8 yesterday. Anyhow, this seems to have erased the ability of the mac to read or mount several identical USB drives with the NTFS format (WD My Passport Ultra 500GB USB3.0). It could do it yesterday when it was OSX 10.6.8, but not today (OSX 10.9.4). The drives still work fine on other OSX 10.6.8, Windows 8.1 and Ubuntu 14.04 computers (this is appears to be a problem with the Maverick 10.9.4 operating system itself, rather than the flash drives which work flawlessly with every other computer I've tried). I want to remove data from the computer to create backups on the USB drives (no, I don't want to create an online backup or buy a new set of USB drives).
diskutil can see the drives, but cannot verify or repair them as they lack a GUID (GPT) partition scheme. I'm assuming this is the root of the problem. Manually mounting the drives does not work. Installing the ntfs-3g driver also did not work (I was using this to write to the NTFS drives until we upgraded OS's). Installing the WD Passport drivers for OSX also did not work. How do I get the mac to mount these drives?
I could reformat one USB drive and then copy to the others, but this would be extremely inconvenient and take days of copying files back and forth (and would prefer to fix the mac rather than go through this with every NTFS drive I own). If I did this, the FAT32 hard drive format would not be suitable, as format is unable to handle the extremely large sequencing datasets I need to transfer. I'm not super familiar with hard drive formats, but in the event we cannot get Maverick to actually work could someone possibly suggest a format able to handle large file sizes (the largest file I need to move is ~60GB) and be compatible with Windows 8.1 / OSX 10.9.4 / Ubuntu 14.04 as well?
Another workaround I thought of would be just to install an Ubuntu partition on the mac and get the files off through the Linux install. Which is also inconvenient, but would probably be faster than trying to reformat the drives and copy everything over onto them again given the amount of data I want to transfer.
Unrelated, but is there any way to view files and folders in the OSX root directory besides through Terminal? It seems like this functionality was also removed when we "upgraded" from Snow Leopard. (At this point, if it were up to me I would wipe all of the macs we own and replace them with Ubuntu... even the most minor of tasks always require some sort of workaround with them... at my wits end here ).

Yeah this definitely appears to be a problem specifically with this mac. It's been having all sorts of weird problems lately, and we figured that upgrading to Maverick might fix them (but instead we got new problems).
To give an update on this, I ended up reformatting one of the drives to HFS+ and disabled journaling. It now recognizes the drive again, and I'm pulling the files off that way. I looked at exFAT, but it looks like HFS+ has much better Linux support (Windows is read-only but that's only a minor annoyance, as the algorithms to process the data only run on UNIX machines anyways). It's a shame I couldn't keep using NTFS (had to copy over literally EVERYTHING again...) but whatever. Again, no solution for the issue (where this mac can't read NTFS drives).
@rkaufmann87 - To give a bit more explanation, we recently had to disable online backups because apparently the sheer amount of data causes Time Machine to freeze the computer and fail every time it has a scheduled backup (original issue we thought that upgrading to Maverick would solve... didn't work). The hard drive has been having a lot of issues when it begins to reach max capacity as well. So I am pulling off all of my files to external hard drives and deleting the local copy before we attempt to back up online again. And the data would probably take me a year and a lot of money to recreate (for the curious, it's high throughput sequencing data). I'm choosing not to take any chances as a result.

Backup to Maxtor USB Drive

Similar Messages

Maybe you are looking for