Backup TPM keys to Mbam 2.5 with Pre Provisonning not working

Hi
I am trying to save TPM owner password to Mbam 2.5 during TS, but can't get it to work.
I can see the Volume recovery keys do upload fine but not the TPM.
Basically what I do is
Make sure TPM is enabled in BIOS
Activate TPM in Winpe with Wmi script (objItem.SetPhysicalPresenceRequest(6)) so that the TPM is enabled and active but not owned. (this looks ok in the Task Sequence status messages)
Pre-Provision Bitlocker step in the TS
I install Mbam client during the Task Sequence
When the user logs on he gets prompted for a PIN (everything fine and working at this level)
By checking what happens with manage-bde I can see that the encryption is ok (used space only),
but the TPM password is never uploaded.
According to documentation,
http://technet.microsoft.com/en-us/library/dn456883.aspx, I should set a key protector, so I tried to set TPM only. I get a policy change prompt after logon but still no TPM password.
One problem I have is that I do not know exactly when the TPM ownership is taken by Mbam (or how to force it), as I don't see much info in the logs. Should the paths to the Mbam DB be defined during the TS so that the client at next reboot, uploads them
(like is the case when you start encryption with Mbam without pre provisioning) ?
I would like to keep if possible pre provisioning and used space only as I get the drives encrypted quickly and before the user gets the laptop.
Thanks in advance for your recommendations.
bruno
bruno

Hi,
I found a similar thread for your reference.
MBAM Manage TPM error "TPM owner password file is not found"
http://social.technet.microsoft.com/Forums/windows/en-US/d758604d-8bad-4fa8-975f-db446f6d11de/mbam-manage-tpm-error-tpm-owner-password-file-is-not-found?forum=w7itprosecurity#a3b20284-b9d6-4ae7-920c-b533dde94618
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
    Just in case the title is too long to show, I have re-pasted here:
    The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    BDAqua wrote:
    Hello & welcome to the Forums!
    I think Spark cured this for another person and the same problem...
    http://www.shadowlab.org/Software/spark.php
    http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
    http://doublecommand.sourceforge.net/
    Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

  • HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    Hmm.. Thank you for the response.
    Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
    Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

    Contentmom6 wrote:
    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
    Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store.  Now try System Preferences > Displays > Detect Displays.  You should now be able to select a display mode for the monitor.  If it still doesn't work, then I'd check that everything is properly connected.  I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
    Bob

  • I've had to reset my ipad to factory settings and restore from backup (have also got new softwear) my passcode is now not working - any ideas on the default?

    i've had to reset my ipad to factory settings and restore from backup (have also got new softwear) my passcode is now not working - any ideas on the default?

    Typos mad = and
    Receive = retrieve

  • FIND with MATCH OFFSET not working

    Hi,
    I have a statement:
    FIND '/' IN <ls_data_package>-/bic/zbib_sysn MATCH OFFSET off2.
    this works in all the case except for when <ls_data_package>-/bic/zbib_sysn = SSULTANA-VMC/.
    (i.e. when /bic/zbib_sysn = USERID-VMC/, here SSULTANA is the user ID)
    *In this case off2 = .
    Value of sy-subrc is 0 after this statement is executed
    Can some one please point out what I am doing wrong.
    Thank you,
    CD
    Edited by: CSD . on Sep 26, 2008 9:53 PM

    >FIND with MATCH OFFSET not working  
    Most unlikely.  More likely is that it isn't doing what you think it should be doing.  Or you're using it incorrectly!
    I can't really follow what your problem is.  I assume you mean that you are getting off2 with value 0, when /bic/zbib_sysn contains USERID-VMC/
    Can you be a little clearer in what the issue is?
    DATA: off2 TYPE i.
    FIND '/' IN 'this string /' MATCH OFFSET off2.
    WRITE: / sy-subrc, off2.
    This little program returns 0 and 12 
    matt

  • I just got my replacement  iphone5 but i am not satisfied that because the battery backup is worst and the one of the speakers have not working so i have doubted that its a brand new or refurbished one. i replaced it in the warranty period

    hi i just got my replacement  iphone5 but i am not satisfied that because the battery backup is worst and the one of the speakers have not working so i have doubted that its a brand new or refurbished one. i replaced it in the warranty period

    thanks for the information about speakers. and i mean the battery back up the battery i always getting lower even im not use. and can u pls tell me how to check this as a brand new or not. b'coz in the store they gave me replacement phone without boxing. the phone was coverd by wrap and they never give any receipt for this

  • I am having trouble with my speakers not working while online in particular on windows.My audio works when playing audio files

    I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.

    Hi,
    Did it happen all the time or sometime?
    Please check online browser status:
    Click Volume icon in the taskbar, click Mixer link button as below:
    If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
    Tips for fixing common sound problems
    http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
    Meanwhile, this similar thread also could be referred:
    https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Serial number provided with download does not work, now what?

    serial number provided with download does not work, now what?

    Chrish29593217 you are welcome to contact our directly at Contact Customer Care.  What Adobe software title are you facing difficulties with?

  • TS3297 i bot a 3g iphone 2nd hand and it is trobleing a lot with os and not working plese help me

    i bot a 3g iphone 2nd hand and it is trobleing a lot with os and not working plese help me

    The following guide gives information on how to sync ringtones from your computer to the phone. The reference section at the bottom of the quide also gives instructions on how to convert a song to a ringtone. https://discussions.apple.com/docs/DOC-3792

  • [svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

    Revision: 4323
    Author: [email protected]
    Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
    Log Message:
    Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
    QA: Yes
    Doc: No
    Checkintests Pass: Yes
    Details:
    * Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
    Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-544
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

    Running the script by python2 solves it for me:
    su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
    Best regards,
    Cedric

  • I have downloaded skype, but after synchronizing with itunes skype not working, why?

    i have downloaded skype, but after synchronizing with itunes skype not working, why?  when I was synchronizing I believe there was some message in itune saying software not backed up or somethin to that effect.

    Thanks for your response.
    However, I did not find any solution to my problem.
    in my phone the skype application skype is not opening up, same is the caseiwth mobile voip. Both these applications were downloaded last night and it worked then, but not working now.
    Thanks in advance for anyone willing to help. I am new to the iphone.

  • Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, send me ansver,please

    Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, write me of bookmarks could not be loaded. Please advice on everything because I came and they seriously need it.

    Did your computer crash or did Firefox crash causing the loss of the bookmarks?
    You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    See also:
    *http://kb.mozillazine.org/Lost_bookmarks
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes

  • Problem with HP SimpleSave not working

     I have a 1TB HP SmartSave external HDD, before hand it was with my father and I recently tried to use it again. It's not working, and here are the details:
    - When it's plugged in my laptop recognizes it as a CD drive, but one with only 884 KB of space
    - Upon clicking the drive, the only thing there is the HP Launcher (552 KB), and I'm guessing this is the problem.
    - Obviously, clicking the launcher does nothing.
    - I tried looking into the problem and saw the solution about downloading the SimpleSave's software and launching it from inside the HD, but I can't do that because according to my laptop the HD only has 884 KB of space. Any attempt to copy files to the location or extract them there comes up with a "not enough space" error.
    - I'm also unable to delete the current HP Launcher application or format this thing.
    So, any ideas? I NEED YOUR HELP!!!!

    Hello malehussey,
    The HDD is not being seen and the limited space is the CD emulator thats attached to the drive being reported.
    The CD emulator is a bridge that has to be used for SimpleSave to work.
    Have you tried using it in another computer to rule out any issues with your laptop?
    If it does work, we can go from there.
    Can you tell if the hard drive spins when plugged in?
    Also go into Disk Management to see if the HDD is recognized or shows as Unallocated Space. Right click My Computer and choose Manage/Disk Management (depending on which operating system you have).
    If it does not show at all, its most likely that the hard drive has met its end of life.
    You could go further (if you like tinkering) and tear the case apart, remove the CD card attached to the HDD and hook the HDD directly to a SATA port on a desktop type of PC with a SATA cord. Also you can use a USB to SATA adapter or a HDD Dock to plug the drive into a laptop. Then you can see if the drive will work properly. If it does, then theres a problem with the CD card or connection in the case. The case alone cannot be used to connect the HDD without the CD card installed because of the hookups.
    If you can extract the files saved on the SimpleSave drive, you will not be able to use any SimpleSave backups (and possibly any other files saved either) unless you have the CD card hooked to the drive first. The CD card encrypts and decrypts the data on the SimpleSave drive.
    Bottom line, its most likely time to buy another external drive. 

  • Sending by mail an Invoice with VF02 does not work

    Hi guys,
    When using VF02 to send by mail an invoce form, the functional consultant is in trouble since it does not work. I am ABAP consultant, and before starting to debug the huge amount of lines of code behind this transaction, I think there might be a more straight solution. When setting the invoice number and entering this transaction, we accessed Goto->Header->Output. The output table to enter our fields appears. Here we set ZXXX as output type and External send like the Medium. When I press enter, the line is automatically filled with the rest of fields. Then we go to Further Data and choose the Send Immediatelly (when saving the application) option. Get back and press Save button. After it, a message "Please enter a communication strategy" is shown and the SD consultant told me that the correct option is MAIL (in fact, this option is part of the F4 help, with "email" as descriptive text) in the Communication strategy field. She told me it should be all to send a mail with the invoice. We did not fill the Logical destination nor checked "Print immediatelly" or "Release after output" checkboxes since they are not useful in this case. So when finally Save button is pressed, a message appears: " ", and then a dialog box appears with the following message: " Express document "Update was terminated" received from author "GILBERTO PARGA"". The mail received in my inbox is only a error message with title "Update was terminated" and the content is the following:
    Update was terminated
    System ID....   XXX
    Client.......   999
    User.....   SOMEBODY
    Transaction..   VF02
    Update key...   XXXXXXXXXXXXXXXXXXXXXX
    Generated....   12.05.2011, 20:37:27
    Completed....   12.05.2011, 20:37:27
    Error Info...   Output device not defined.
    The system is SAP ECC 6.0. Note that the message indicates no output device was defined, but since we are using email instead of print output, it does not matter. I have filled the field with the same result. I have read from Internet it could be a configuration trouble (the SD consultant checked it before, according herself) or even a Basis issue. Anyway, do you know the possible causes and possible solutions (like OSS Notes) for this trouble? The print output works fine, by the way.  Thank you all for your help.

    Hi,
    If you maintain method EXTERNAL SEND then in communication method you have to specify Communication strategy as CS01(Internet/letter)
    If you maintain method simple mail then in communication method you have to maintain RECIPIENT and RECIPIENT TYPE
    Also check the number range assignment for billing type for error "Update was terminated"
    you might be assigned numbers which are already consumed.
    kapil

Maybe you are looking for