Backup via export function has corrupted the majority of my images

I have scanned the last 11 pages of posts and have not found exactly what I am looking for.
My mother passed away in an accident and just prior to her trip I backed up her 6000 photos in her iphoto 5. I backed them up using export and transfered them from her ibook to my powerbook via the target disk mode. Her laptop was lost in the accident, thus I am the only one that has a copy of all her photos. The problem is about 95% of the images are corrupted either completely or the thumbnail looks good but the image comes up with half the image or all of the image blurred. I have tried to get them back using iphoto 5 and now I have upgraded to iphoto 6 and no luck.
The only info I found was from Toad:
Were you exporting the files to a folder on the desktop with the File->Export->File Export menu route? If so you may have some files with the same file name from the camera and that will cause a problem. Even if you've retitled them in iPhoto the file name remains the same.
This could be the issue here are some of the names that came out during the export:
0003.jpg
4-9-2005 2-47-12 PM_4#.jpg
4-9-2005 2-47-14 PM_5#.jpg
4-9-2005 2-47-20 PM_7#.jpg
4-9-2005 4-33-02 PM_8#.jpg
4-9-2005 4-33-07 PM_10#.jpg
4-9-2005 6-36-04 PM_18#.jpg
4-9-2005 6-36-19 PM_20#.jpg
4-9-2005 6-36-49 PM_22#.jpg
4-9-2005 6-36-56 PM_23#.jpg
4-9-2005 6-36-59 PM_24#.jpg
4-9-2005 6-36-59 PM_245#.jpg
4-9-2005 6-37-12 PM_25#.jpg
4-9-2005 6-45-35 PM_26#.jpg
4-9-2005 6-45-50 PM_27#.jpg
4-9-2005 6-45-55 PM_28#.jpg
DSC00012.jpg
DSC00013.jpg
DSC00014.jpg
DSC00015.jpg
DSC00016.jpg
DSC00017.jpg
DSC00018.jpg
DSC00019.jpg
DSC000110.jpg
DSC000111.jpg
DSC000112.jpg
DSC000113.jpg
DSC000114.jpg
DSC000115.jpg
DSC000116.jpg
DSC000117.jpg
DSC000118.jpg
DSC000119.jpg
DSC000120.jpg
DSC000121.jpg
DSC000122.jpg
DSC000123.jpg
DSC000124.jpg
DSC000125.jpg
DSC_0001.jpg
DSC0002_11.jpg
DSC0002_12.jpg
DSC0002_13.jpg
DSC0002_14.jpg
DSC0002_15.jpg
DSC00021.jpg
DSC00022.jpg
DSC00023.jpg
DSC00024.jpg
DSC00025.jpg
DSC00026.jpg
DSC00027.jpg
DSC00028.jpg
DSC00029.jpg
DSC000210.jpg
DSC000211.jpg
DSC000212.jpg
DSC000213.jpg
DSC000214.jpg
DSC000215.jpg
DSC000216.jpg
DSC000217.jpg
DSC000218.jpg
DSC000219.jpg
DSC000220.jpg
DSC000221.jpg
DSC000222.jpg
DSC000223.jpg
DSC000224.jpg
DSC000225.jpg
DSC000226.jpg
DSC000227.jpg
DSC000228.jpg
DSC000229.jpg
DSC000230.jpg
DSC000231.jpg
DSC_0002.jpg
DSC0003_11.jpg
When I try to import them into iphoto it is unable to import the images. The images in the finder show the size, date created etc. but when you click on them in the finder - preview says that it is an unrecognizable file format or corrupted.
Any help would be greatly appreciated by our family
Thanks

sky_73:
Welcome to the Apple Discussions. First select one of the problem images and bring up the Info window on it. Then set Preview as the default application to use. Now see if it will open in Preview. If not we move on to the next try. Do you have a 3rd party editor that you can use to attempt to open the file? In not GraphicConverter, which you can run in demo mode, is usually able to open nearly any image file. If it can open your file you can then do a Save As and save it to a new file. Then see if that file will import into iPhoto.
You are aware that iPhoto will not import any file that's inside it's iPhoto Library folder, right?
Give those suggestions a try and post back.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application, iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Similar Messages

Can RMAN backup and export datapump executed at the same time?

Hello,
I have several databases that I backup using RMAN and export datapump everynight starting at 6PM and end at Midnight. The backup maintenance window doesn't give me enough time for each database to run at different time. I am using crontab to schedule my backups. Since I have so many databases that need to be backed up between 6PM - Midnight, some of the export and RMAN backup scripts will execute almost at the same time. My question is can my export data pump and RMAN backup scripts run at the same time?
Thank you in advance.
John

Needs must. If you don't run expdp parallel then it doesn't use that much. If it was really killing the system then look into setting up a Resource plan that knocks that user down but this is a big step.
I woud better look into using Rman
system incrementals, and block change tracking, to minimize your RMAN time.
Regards
If your shop needs to do both simultaneously then go for it.
Chris.
PS : One of my shops has maybe 20-30 rmans and pumps all kicking off some simultaneous, some not, from 0000 to 0130. No complaints from users and no problems either. Go for it.
Edited by: Chris Slattery on Nov 25, 2012 11:19 PM

Xml Import / Export Functionality (Part of the Transport Component)

Hi
I Export one of my iViews using the new xml export function .
When I tried to import the xml file I get the following error
Failed to extract root node
Parsing failed
Thanks
Theo

Theo,
Make sure that the object being exported does not have permisison or dependency problems. Also, make sure there are no object locks/users accessing the specific iView. You also have to have the access to export/import.
James

The backup sure wastes a lot of time when it works, let alone finding out it has corrupted the backup drive

when I backup with time machine it makes my backup disk read only and OSX wants me to reformat my backup drive.
Why? A bug with an expected fix?

blinkable wrote:
I don't have auto backup turn on for Time Machine. If I don't have Time Machine on, do I still have to perform the Terminal function of "sudo tmutil disablelocal"?
No, as you notice in this screenshot, "backups" is Zero. This is where local snapshots would be stored.
My other question is that is it ok or advisable to delete apps that are pre-installed when we first received the MBA? I noted there are quite a number of apps that may not be of use (especially those under the Utilities folder) but pre-installed. In the event that I have uninstalled/deleted these pre-installed apps is there any way to restore or download them?? Are these apps the ones that are taking up the space under Other or they will just fall under Apps section?
You can delete the Apps. You can reinstall them at any time by inserting disc 2 (the applications disc that came with your mac). I don't use GarageBand or iMovie, so I deleted them. Apps just fall under the "Apps" category. I qquestioned the Genius Bar as to what is in "other" and they said it is impossible to say exactly what is in that category, it is slightly different for each user. It does include the operating system among other things. They told me to thing of it as an "etcetera" category.

Is it possible to have two hard drives connected to my airport extreme and use one to store my itunes library/iphoto and the other to backup via time machine? Will the second (larger) drive back-up both my mac HD and my other external airport drive?

For the past year I've been using an external hard drive (HD1) connected to my airport extreme as the back-up location for time machine. This has worked fine without any issues. What I would like to do now is to move my itunes and iphoto libraries off of my laptop (space constraints) and store them on a second external hard drive (HD2) connected to the airport extreme. I have successfully connected the second hard drive using a Belkin powered USB hub. What I am wondering is if I direct my time machine back-ups to HD1 will it back-up both my mac HD as well as HD2? I apologize if this has already been answered but i've read conflicting responses on various message boards and a number of responses were dated so I wanted to make sure I received the latest information.
thank you

kosty wrote:
For the past year I've been using an external hard drive (HD1) connected to my airport extreme as the back-up location for time machine. This has worked fine without any issues.
That may be true, but you need to know that backing-up that way is unreliable and not supported by Apple. See: Using Time Machine with an Airport Extreme Air Disk. Do not be surprised if those backups suddenly turn up corrupted.
What I am wondering is if I direct my time machine back-ups to HD1 will it back-up both my mac HD as well as HD2?
No. Time Machine cannot back up from any network location. The 3rd-party utilities CarbonCopyCloner and ChronoSync may be workable alternatives.

Setting for Export function to save the data

I am using one custom made report where in I have option of export (save data).
When I generally click on this option, data get saved in a spreadsheet directly; from past couple of days I am unable to see the export tab and other facilities.
Request to guide where this setting s are made.

dear firiend,
first contact your abaper and ask about that;
second,
others ways you can try:
1. from the main menu goto System-List-Save-Local file . Select excel sheet then.
2. send your report layout to SPOOL (print) , run SP02 , find your item and try to download data from spool to the local file/excel sheet
good luck

Schedule Hot backup via OEM

Hello all,
We have a realtively small system running Oracle 10G on Windows 2003 O/S. I've scheduled a full offiline (cold) backup of the whole db to run once weekly via OEM. Every night we run a script to do a 'logical' backup by EXPORTing the 2 main schemas in the DB out to .DMP files. However this now may not be enough to satisfy DB recovery requirements.
Is there an easy way to schedule a 'Hot' backup via OEM, that could replace the EXPORT scripts mentioned above, or would we have to write an RMAN script to do this ?? The requirement is really to allow the database to be updateable whilst any daily backup is running. I realise that the DB needs to be in ARCHIVELOG mode for anything like this to work.
Any advice would be greatly appreciated.
Thanks,
Shaun.

hi,
on the OEM main page, click on targets, you should see your databse there. click on the database and then on the maintenance tab.
from here you can schedule jobs and you have the option to schedule a online rman backup of your database. However, to do an online backup your database needs to have archiving turned on. Is this the case as you currently carry out offline backups which might indicate that archiving is turned off.
regards
Alan
Edited by: alanm on Sep 5, 2008 11:47 AM

Exporting transparent pages for the iPad

Confusing.
Baffled.
So bear with me as I attempt to explain what I'm so earnestly trying to figure out is even possible; and if so, how to do it..
I'm attempting to export an epub for the iPad that contains images [without a background] from Photoshop. In Photoshop, the layers build on top of one another. (Think of physical transparencies printed out with different images and as they stack on top of one another they build a conglomerate image)
So in theory, I want to export these pages from InDesign as transparencies, that when the page is turned on the iPad, you can see through it as the images stack on top of one another.
It seems confusing to me because of the front and back of each page in InDesign.. It's like dealing with two pages instead of one. For example, in a facing pages layout, if I had an image on the 3rd page [lets imagine that's on the right in the layout], would the 4th page [on the left] be showing the transparent side of the 3rd page? I just want it to be read as a literal transparent page [the 3rd and 4th page conglomerate] that you can see through to the 5th.
Is this possible? Do I need to set a certain transparency option in InDesign when I export?
Or is this just not feasible..
Please help.
I'm lost.
Thank you

You're saying you want your epub to look as if it's printed on transparent acetate? I don't do epub, myself, but I don't think that's going to happen.If it were possible, you'd have to specify an opaque page (the equivalent of a piece of white paper) for all "normal" pages to keep them readable, and that's just something ID is not set up to do.
ID simply doesn't care what sort of stock you print on. What is on the page is what will output to the medium on which your doc is printed (ID is first and foremost an application designed to make layouts for print). Nothing is genreated in terms of background other than what you yourself might add. A PDF is theoretically has no additional white background, but Acrobat displays one so your desktop doesn't show through. I imagine the same thing happens with epub readers. If no background is specified, the reader provides something.

Has anyone tried to sync photos with the cable to itunes rather than how it should work via Wifi with iCloud? The info on the Apple support page says that you should backup to both iTunes & iCloud, but 2x the Genius Bar told me not to. Help please!

Has anyone tried syncing their photos to iTunes with the cable in addition to how it should work via wi-fi on iCloud? On the Apple support info page, it says you should do both types oof backup. The Genius Bar told me 2x not to do both. What experiences has the community had? I'm also having syncing issues with photos most recently as well as contact updates. (I have an iPhone 4S with the iOS7.1) Thanks much!

It sounds like you are mixing up several different things (or not using the terminology that Apple uses).
One thing is backup. You can backup via icloud or via iTunes and there is no reason you cannot do both -- I do and the second link below from Apple gives instructions. Doing a backup will include photos from the Camera Roll in the backup but you will not be able to see the results -- all of the backup data will be stored on iCloud or on your computer in files that are not designed to be accessed by you for any purpose other than restoring to your phone in the event of a problem. More information on backup:
http://support.apple.com/kb/HT1766
http://support.apple.com/kb/HT5262
If you simply want to transfer photos from an iPhone to a computer, the terminology Apple uses for that is "import" and it is done without iTunes. New photos (taken after you change the setting) can be done via PhotoStream which is a cloud based option. The other option is via cable. Instructions for both: http://support.apple.com/kb/ht4083
Syncing via iTunes (with regard to photos) is used to transfer photos the other direction -- from the computer to the phone. Instructions for that http://support.apple.com/kb/HT4236

How to remove watermarks from images which have been inadvertently applied via the Lightroom Export function? [was: Help!]

I put a watermark on a photo in Lightroom 5 and exported it to a file. I then had another group of images which I exported and they all had the watermark on them and I can't get rid of the watermark

Export the photos again, but in the Lightroom Export dialog box, remove the check next to Watermark

Controlfile has corrupted and not able to open up the database. Very urgent

Hi All,
I am working on 11gR1 database on linux environment and suddenly the DB went down. I look at the alert log and i am following that guidelines, but i am not able to put the database in mount state and it is thronging error message. Please suggest me in correct way. This is very high priority for me.
I have done below steps.
1.set the environment through . oraenv
2. export ORACLE_SID
3. SQL>startup nomount
ORACLE instance started.
Total System Global Area 4943876096 bytes
Fixed Size 2143944 bytes
Variable Size 2617248056 bytes
Database Buffers 2281701376 bytes
Redo Buffers 42782720 bytes
SQL>alter database mount;
alter database mount
ERROR at line 1:
ORA-00214: control file '/u02/oradata/beacondp/control02.ctl' version 390158 inconsistent with file '/u01/oradata/beacondp/control01.ctl' version 390097
4. SQL>alter system set control_files='/u02/oradata/beacondp/control03.ctl' scope=spfile;
System altered.
SQL>startup restrict
ORA-01081: cannot start already-running ORACLE - shut it down first
5. SQL>alter database mount;
alter database mount
ERROR at line 1:
ORA-00214: control file '/u02/oradata/beacondp/control02.ctl' version 390158 inconsistent with file '/u01/oradata/beacondp/control01.ctl' version 390097
alert log Information:
Thread 1 advanced to log sequence 9261
Current log# 3 seq# 9261 mem# 0: /u02/oradata/beacondp/redo03.log
Tue Sep 13 15:00:14 2011
********************* ATTENTION: ********************
The controlfile header block returned by the OS
has a sequence number that is too old.
The controlfile might be corrupted.
PLEASE DO NOT ATTEMPT TO START UP THE INSTANCE
without following the steps below.
RE-STARTING THE INSTANCE CAN CAUSE SERIOUS DAMAGE
TO THE DATABASE, if the controlfile is truly corrupted.
In order to re-start the instance safely,
please do the following:
(1) Save all copies of the controlfile for later
analysis and contact your OS vendor and Oracle support.
(2) Mount the instance and issue:
ALTER DATABASE BACKUP CONTROLFILE TO TRACE;
(3) Unmount the instance.
(4) Use the script in the trace file to
RE-CREATE THE CONTROLFILE and open the database.
Please let me know, how i need to proceed. Major problem is i am not able to put the db in mount state. I have both spfile and pfile.
Thanks in advance.

user13162661 wrote:
Thanks Pavan for yoour response, but how can i find, which is good copy of the controlfile?
Now i have 3 controlfiles in spfile or in pfile, Can i directly remove the 1 and 2 controlfiles from pfile and put the 3rd there itself and start the db.
startup pfile='file_path';
Is there any thing i am missing?
Please helpout.
control file '/u02/oradata/beacondp/control02.ctl' version 390158 inconsistent with file '/u01/oradata/beacondp/control01.ctl' version 390097I suspect that control02.ctl is the good one since it has the higher SCN

ColdFusion 11: allowedextforinclude functionality has changed. But the docs haven't been

G'day:
I am reposting this from my blog ("ColdFusion 11: allowedextforinclude functionality has changed. But the docs haven't been") at the suggestion of Adobe support:
@dacCfml@ColdFusionCan you post your queries athttp://t.co/8UF4uCajTCfor all cfclient and mobile queries.— Anit Kumar Panda (@anitkumar85)April 29, 2014
This particular question is not regarding <cfclient>, hence posting it on the regular forum, not on the mobile-specific one as Anit suggested. I have edited this in places to remove language that will be deemed inappropriate by the censors here. Changes I have made are in [square brackets]. The forums software here has broken some of the styling, but so be it.
G'day:
Remember this one: "ColdFusion 11: preventing files from being included? [WTH], Adobe?". I can confirm this verymoderatelyslightly contentious feature has been changed in ColdFusion 11, but the docs have not been updated to reflect the change.
The issue is summarised thus (from the article linked-to above):
[...]out of the box ColdFusion 11 will only allow the inclusion of CFML and HTML files. Why? They cite "for security reasons". Here's a quote (posted in the bugtracker, originally from the pre-release forums):
"Vamseekrishna Manneboina: Yes, this was done as part of a security measure. You can now only include CFM/CFML files by default. You can specify additional extensions via a property called allowedextforinclude in neo-runtime.xml. By default, HTM and HTML file extensions are already added to this list/property, thereby allowing for inclusion of HTM and HTML files too by default."
OK, I disagree there's merit in this, some others agree, others disagree. But... so be it. I actually thought - if I was in a charitable mood - that the people that were "for" this change made a reasonable case for its inclusion, so - whilst not agreeing with them - I was content to just shrug and go "yeah, oh well".
Now this feature is still in the docs: "New in ColdFusion 11 - Restrictions", but this is not the way it now works. Initially I thought it had been removed completely (and I am now in the midst of retooling this article from saying that... as I only worked out what was going on 2/3rds of the way through writing it).
I did a secure install the other day, and one of the first things I tested was this:
 <cfset message = "before"> <cfoutput> #message# <cfinclude template="code.inc"> <cfset message = "after"> #message# </cfoutput>
 <cfset message="within"> <cfoutput> #message# </cfoutput>
And this all runs fine, as one would expect:
before
within
after
Next I checked neo-runtime.xml to see if the settings had been augmented to switch this off by default: but I'm buggered if I can see any reference to it anywhere.
So I then checked ColdFusion Administrator to see if there was any hint of it there, as this was one of the things Adobe said they were going to do in their solution to this. And there it is:
So by default now, anything is allowed. I figured I must have missed the setting in neo-runtime.xml, so changed the setting to "FOOBAR" so I could easily spot it, and there it is down @ /wddxPacket/data/array/*[16]/var[@name="compileextforinclude"] in neo-runtime.xml:
<var name="compileextforinclude"> <string>FOOBAR</string> </var>
And - having changed it back to something sensible: CFM, then the feature now "works":
before
#message#
after
However this is probably a worse security hole than the one they were trying to fix! It looks OK when looking at the render in the browser, but look at the actual raw mark-up:
before <cfset message="within"> <cfoutput> #message# </cfoutput> after 
We have unparsed CFML source code sent to the browser. This is awful. What if someone switches this on, and doesn't spot one of their old includes which has less-than-trivial CFML in it? It's now publicly accessible. Adobe have created a feature which has the possibility to leak source code to the outside world. How is that a security feature?
Also interesting is that with the super-secure profile installed, this is still off by default? I would have thought it'd be on in this case?
I still don't think this feature has been implemented properly, and it all still points even more to the fact the Adobe ColdFusion bods don't really know what they're doing.
Anyway, I'll nudge Adobe to at least get the docs sorted out.
Time for work (3min ago)...
Adam

Hi Adam,
Regarding "What if someone switches this on, and doesn't spot one of their old includes which has less-than-trivial CFML in it?", yeah I agree that'd be a problem. Hmm, maybe both this.allowedextforinclude *and* this.compileextforinclude should've been supported (instead of replacing the former w/ the latter as was done)? Example:
this.compileextforinclude="cfm,cfml,inc";
this.allowedextforinclude="cfm,cfml,inc,txt";
That way an exception could be thrown if cf|included file's extension wasn't in the this.allowedextforinclude list.
Perhaps the above could be shortened to:
this.compileextforinclude="cfm,cfml,inc";
this.allowedextforinclude="txt";//implicitly includes * from this.compileextforinclude (since -compile- implies -allowed-)
Dunno if that'd be confusing.
Anyhow, just some thoughts..
Thanks!,
-Aaron

How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.

How do I get my photos off 1st generation itouch? I have macbook pro, ipad, iphone. Itouch syncs but does not have option to share in any capacity ie send via email, etc. Also, the computer from which photos were originally taken from has crashed.

It has always been very basic to always maintain a backup copy of your computer.
Did you fail to back up your pics?
The photo sync is one way - comptuer to ipod.
You can e-mail them to yourself (instructions in the manual), but they will not be of the original quality.

Trouble shooting the export function

I am a new user to CS4 Premiere 4.1.0 as part of my master suite program bought 2 weeks ago. I can't find any trouble shooting help or explanation of error messages in the program's help section; I have tried most of the trouble shooting steps (other than reinstalling the entire suite) from the knowledge base on the Adobe site without any success; and finally would like someone on this forum to rescue my newly installed Premiere from disaster. Here is my problem:
---- when exporting utilizing the media encoder; after exporting and clicking on the encoder to start , the program would come back with the following error message " PProheadless has encountered an error. [..\..\Src\Remote Import Module. Cpp-250]". I can't find any reference to this error code and how to fix it on the Adobe website. I have tried to fix it for days now without any results. Without being able to fix this my programs are useless to me.
Not finding any reference on the Adobe manual to the error code or how to trouble shoot the program is really demoralizing and disappointing to me. You can see PProHeadless as a program on the computer's hard drive but you won't find any reference to this program throughout the Adobe website.
For reference my hardware specs. are: i7 920 CPU, 6 G DDR3, Asus P6T professional work station main board, 160 G SSD SATA C-Drive, 1 tera byte SATA D and E drives, the GPU is nvidia GTX 285 with 1 GB ram, 1000 Watt power supply in a mini tower, plus Sony Blue ray, OS is Vista 64 premium. The computer is dedicated to editing video. All programs are loaded on C; the D drive is used as working space and virtual ram. E drive is for storage. The only other program running is Avast anti-virus program. The file exporting problem stays even when Avast is uninstalled. All the devise drivers are Vista 64 compatible. The computer is brand new; dedicated to Premiere - not even Microsoft word is loaded.
In addition to the above exporting problem, every time I switch between loaded programs such as between Premiere and Firefox, the cursor would stay in the "wait" mode, i.e. in a spinning circle, for about a minute before turning into an arrow in Premiere. It almost feels like Premiere has to reload the ram all over again; this is really annoying and time wasting.
If I have known of these issues, I would have bought a Mac Pro with Mac software in the first place.
I would really appreciate some help from friends and experts on this forum. Thank you.

Do you have a dynamic or fixed dimension table?
Looks like you have a fixed dimension table here...
Using -> [*] is to specify each instances of that object inside the subform specified... Here if you have more than one PSI into Row5 it would work... But as I understand you have to write only Avg(Row3.PSI, Row4.PSI, Row4.PSI)
If you have a dynamic table and your row is only named Row1... each instances of the row would be Row1[0], Row1[1], Row1[2]
So in your Average function you would only write :
Avg(Row1[*].PSI) and it would return the average of each rows

I have configured a new one iphone 4s I have done it via wifi i has caught myself for defect the you ID (mail) of a person that toward a lot of time habia lived in my house. Someone can tell me the because??

I have configured a new one iphone 4s I have done it via wifi i has caught myself for defect the you ID (mail) of a person that toward a lot of time habia lived in my house. Someone can tell me the because??

PinguXeF wrote:
, while I have taken a backup of the iTunes Library,
this means nothing if it was not done correctly...
To have EVERYTHING on a New Computer...
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751

Backup via export function has corrupted the majority of my images

Similar Messages

Maybe you are looking for