Backup when file is open for writing

Does Secure Backup support file backup when a file is open for either reading or writing? Thanks.

Yes for UNIX / Linux but consistency is not guaranteed. OSB doesn't backup open files on Windows.

Similar Messages

  • HELP! File already open for writing?

    I've got a file that has been Stuffed (using Stuffit) and now I'm trying to unstuff it and/or open it but get the "File is already open with write permission (-49)" error with an "OK". When I click OK, it stops doing what it was doing. But this file has not been opened for months. What do you think happened to this file prior to stuffing it? Could it have been open and renamed while it was still open? Is there a way that I can open this file? This is a file that can be very helpful with the reconstruction of the next year's edition. We're a printing company. Any input would be great.

    There are a multitude of possibilities as to how a file might get corrupted. Specifically with Stuffit is that older versions had a file limitation, i.e., about 2GB of the total to be compressed, but the user does not get any warning to this fact. You may want to check the support section of their website. Hopefully, there is an uncompressed backup else where.

  • Error: "File couldn't be opened for writing" with CinemaDNG sequence

    Using a Premiere Pro > After Effects workflow with my colorist.
    I created a project in Premiere CS6 and used MOV transcodes because Premiere CS6 does not read CinemaDNG sequences. I do not have CC installed on my computer. My colorist, on his computer (we are both using Mavericks), imported the .prproj into AE CS6. We tried to replace MOV files with CinemaDNG sequences, and AE returned this error:
    After Effects error: File couldn't be opened for writing: "[file path]". ( 3 :: 0 )
    Normally when you replace footage with a CinemaDNG sequence in AE, Adobe Camera Raw pops open so you can make changes before the file is important. I have never seen this error before.
    My colorist has CC installed as well as CS6, so we tried that instead.
    Colorist opened the Premiere CS6 project in Premiere CC, creating a new Premiere CC project. Replaced MOV files with CinemaDNG sequences within Premiere CC with no error, project plays fine in Premiere CC. Finally! So we imported the new Premiere CC project in AE CC, and all linked CinemaDNG sequences appear as color bars (unlinked footage). When testing to import a CinemaDNG sequence, AE CC returned the same error as AE CS6.
    So we tried opening the same CinemaDNG files in Photoshop CS6 and Photoshop CC to see if there was an error with Camera Raw. Both versions of Photoshop open the CinemaDNG files correctly in Camera Raw (version 8.3). So now we have CinemaDNG files functioning properly in Premiere Pro, Photoshop, but... not AE?
    Tried replicating this on a second, Mountain Lion computer with both versions of AE, and returned the same issue.
    CinemaDNG files from a different source DID open in AE CC and AE CS6 on both computers, which leads me to believe there is some kind of permissions/metadata issue in this particular set of CinemaDNG files I'm using that's causing problems for AE, but NOT Premiere Pro or Photoshop. Anyone experience anything like this?

    try the "oddball problems" fix:
    http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • SAPCAR: could not open for writing SAPCAR (error 28). Text file busy

    Hi,
    I´m trying to decompress this file( is for a kernel upgrade):
    SAPEXE_15-10006264.SAR
    And when I do SAPCAR u2013xvf SAPEXE_15-10006264.SAR, SAPCAR only decompress a few files and I´ve this error:
    SAPCAR: could not open for writing SAPCAR (error 28). Text file busy
    Instead when I decompress the SAPEXEDB_15-10006263.SAR, SAPCAR does this correctly. I´ve tried to download again the file but the error is always the same.Could someone help me?
    Best regards,

    Hi,
    Now, I´ve unpacked the files but when I do the file copy (in order to upgrade the kernel), I´ve these errors:
    cp: cannot create /usr/sap/SMD/exe/jcontrol: Text file busy
    cp: cannot create /usr/sap/SMD/exe/jlaunch: Text file busy
    cp: cannot create /usr/sap/SMD/exe/libicudata.sl.30: Text file busy
    cp: cannot create /usr/sap/SMD/exe/libicui18n.sl.30: Text file busy
    cp: cannot create /usr/sap/SMD/exe/libicuuc.sl.30: Text file busy
    cp: cannot create /usr/sap/SMD/exe/sapstart: Text file busy
    cp: cannot create /usr/sap/SMD/exe/sapstartsrv: Text file busy
    So could you help me?
    Best regards,

  • XMP file "system.xmp" could not be opened for writing

    hai
    i am trying to download OpenSPARCT1 code on to the kit. i am working on linux platform .upto bit gereration it is o.k. but after that in the DV guide it is given like this "Right-click on the microblaze_0_boot loop application and select “Mark to initialize BRAMs.”,and when i am doing this it is showing the msg asXMP file "system.xmp" could not be opened for writing'.If anybody know the reason please send me.

    Hi Rd,
    Per SAP Note 1911880, this has been identified as a Bug in CR 2011. Since CR 2013 is just a rebranded version of the same tool, the SAP Note should apply to CR 2013 as well.
    For CR 2013, the issue has been resolved in FP3. I would suggest you to upgrade to the highest available version for CR 2013 and see if it works.
    Another workaround could be to right-click the CR Designer exe > Run as Administrator > Log-in with Admin credentials > try opening the report.
    -Abhilash

  • "Error opening for writing" error msg.

    While installing Shockwave Player 12.1.0.150 I received "Error opening for writing" error message. The file C:\Windows\System32\Adobe\Director\SwDir_1210150.dll is missing.
    I uninstalled older versions of it using Add/Delete function of Programs and Features in the Control Panel. My OS is Windows 7 Pro, and default browser is Google Chrome. How/Where to fix this? Thank you in advance.

    SMH  What is up with this download????  NOW, I used the Slim version, it installed with no problem, and in the SysWOW folder where I found the missing .dll file. However, when I check if it's working and it's not. Checked Chrome's plug-ins and it's not there. This is enough to make a bulldog break his chain.

  • What causes "report could not be opened for writing . . ." message

    "This report could not be opened for writing.  Any changes must be saved to a new file."  The version is CR 2013 SP1.  Win 7 Pro.  I'm new to CR and can't figure out why I get this error.  I've verified all Windows permissions.  It's an SAP error message - not a Windows message.  Thanks in advance.
    rd

    Hi Rd,
    Per SAP Note 1911880, this has been identified as a Bug in CR 2011. Since CR 2013 is just a rebranded version of the same tool, the SAP Note should apply to CR 2013 as well.
    For CR 2013, the issue has been resolved in FP3. I would suggest you to upgrade to the highest available version for CR 2013 and see if it works.
    Another workaround could be to right-click the CR Designer exe > Run as Administrator > Log-in with Admin credentials > try opening the report.
    -Abhilash

  • Itunes application error when attempting to open for first time. HELP

    Running windows xp pro, just bought new ipod classic, installed itunes software. When attempting to open for first time i get an itunes.exe - application error, error message that reads "The instruction at "0x100001040" referenced memory at "0x100001040". The memory could not be "read". Click ok to terminate the propgram. Click on CANCEL to debug the program. I have tried re-installing several times, cleaned temp etc. Nothing. Please help, i really want to start using my new ipod.

    You have to unhide your library folder and adjust the user permissions to allow write access.
    Mylenium

  • TP_domain_bd1.pfl could not be open for writing(invalid argument)

    Dear All,
    I have configure new the transported domin (STMS) and getting an error
    TP_domain_bd1.pfl could not be open for writing(invalid argument)
    Please suggeest how to salove this problem and i can see this flie there.
    Regards,

    Hi,
    Did you configure the STms Porperly.
    Did you Distribut the System
    overview -> extras->press distrIbute and activate
    Set the Transdir path in the new system
    Check the domain controller system is accessiblefrom this system especially
    (/sapmnt/trans) and should have read,write permissions
    SAP user IDs:
    SIDadm
    SAPServiceSID
    These IDs must be able to have full control of \sapmnt.
    Thanks Rishi Abrol

  • Dynamic Send Port : The FILE send adapter cannot open file C:\Temp for writing. Details: Access is denied.

    Hi All,
    We have requirement of using ESB toolkit and transforming incoming xml file to edi format. So, we are using ItinerarySelectReceiveXML pipeline for receiving the input from the input location and "EDISend" pipeline for transforming it into EDI and
    send it to destination.
    Now, the receive pipeline is picking up the file, but it is not processed and sent to destination.
    And, we are getting an Access Denied error from Dynamic send port.
    Error Description : 
    The FILE send adapter cannot open file C:\Users\Public\Temp for writing.
     Details: Access is denied.
    Any Immediate solutions/suggestions are appreciated...Thanks.
    Anand

    The difference between dynamic and static port would be send handler. For dynamic port, default send handler will be used and for static port the one configured on the port will be used, could you validate this configuration.
    Also sometimes, administrative privileges are not "real" administrative privileges and company admins will have limited permissions on C Drive folders. Try writing to some other folder to isolate the issue.
    Regards, Ajeet Kumar MCTS Biztalk Server

  • Automatically backup sequence file on open

    Is it possible to write a callback that saves a copy of a sequence file to a given location
    upon opening? Optionally, a second callback could check upon closing whether any changes
    were made to the original and, if not, delete the copy.
    I would like the callback to be general to the station, not just a single sequence file.
    What about the Sequence Editor Option, Backup Sequence Files when Resaving it in Older
    or Newer Format? I haven't figured it out. Please advice.
    Regards,
    Stefan
    Message Edited by Vedeja on 01-25-2006 11:45 PM

    For an individual sequence file, you can use the SequenceFileLoad and SequenceFileUnload callbacks to execute some code.  This code can make a copy of the file and return it to the original state if needed.
    Allen P.
    NI
    Message Edited by AllenP on 02-01-2006 05:28 PM

  • Thoughts on how LabVIEW handles checkout of file from SCC when file already open

    When you already have a file/project open in LabVIEW and it is set to read only because you haven't checked it out, you can go into SCC and do a checkout then save the file immediately. The issue with this is, if your local copy doesn't match the copy in SCC, you will probably be overwriting changes. Sometimes this is convenient because if you have ever edited a MS Word file and then gone to save and it won't let you because it was opened as read-only...then that sucks because you either lose your work, or have to do a copy of the entire word file->close the program->re-open as writable, then paste. This can be avoided with the "LabVIEW way", but the "MS Word" way seems much safer because it forces you to conscioiusly make the file writable (by either checking it out or manually write clicking and changing to writable) BEFORE opening it. I just wanted people's opinions on how LabVIEW handles this, and if there would be a better way.
    CLA, LabVIEW Versions 2010-2013

    VSS 
    CLA, LabVIEW Versions 2010-2013

  • The pdf font quality changes if another pdf file is open, for pdfs generated by Latex Beamer

    Hi There,
    I create pdf presentation files using Latex Beamer. I see a strange behavior when I open the file with Adobe reader to read it. If another pdf file is already open, the quality of the font is good but the shadow of the boxes disappears. If no other pdf file is open, the shadow box is good but the font has a low quality.
    Does anyone know about this problem?
    Thanks
    Kaveh

    Kaveh,
    I am having a similar issue with PDFs i create from Photoshop and added links in Acrobat.  The quality of the text was changing on me and I hadnt realized it was when I had more than one PDF open.
    Please let em know if you come to any resolution on this.
    Thanks,
    Jamie

  • When I try to open a downloaded PDF file it opens for about 6 seconds and then closes - how can I fix that?

    I am using a Dell XPS8500 desktop with 64 bit Windows 7.
    No problem downloading PDF files but when I open them they disappear before I can print.

    Hello,
    Which application are you trying to open the PDF files in? Firefox or Adobe Reader? Or another?
    If adobe reader then please make sure that your copy is up to date. You can get the latest version here - http://get.adobe.com/uk/reader/
    Also I notice that you are using Firefox 19. Unless you have a particular reason to run an old version of Firefox is it much better to keep updated. The latest version is v22. New security fixes are applied in every new version of Firefox. Without them your PC is vulnerable. Please see this article: [[Update Firefox to the latest version]]

  • Linking error when using C++ DLL for writing TDM files

    I try to integrate TDM into my C++ code. Then I downloaded the package from the NI website "Integrating TDMS in Third-Party Products". I tested the the sample "writeFile.c". But a  linking error as following occurred:
    1>Linking...
    1>nilibddc.lib(implib.obj) : error LNK2019: unresolved external symbol __imp__wsprintfA referenced in function _LoadDLLIfNeeded
    1>.\Debug/Test TDM.exe : fatal error LNK1120: 1 unresolved externals 
    Can anyone help me out. Many thanks. 
    Solved!
    Go to Solution.

    I migrated my code from VC++ 6 compiler to VC++ 2005. Then linking errors are gone.
    nilibddc.lib(implib.obj) : error LNK2001: unresolved external symbol ___security_cookie
    nilibddc.lib(implib.obj) : error LNK2001: unresolved external symbol @__security_check_cookie@4
    P.S. "Read me" from NI says "The Microsoft 32-bit format is compatible with Microsoft Visual C version 6.0". But I tested the code with VC++6 professional with SP6 package and upgrade the SDK to the latest version that supports vc6. I still have the linking errors. My test seems prove that the dll does not support VC6. 
    Message Edited by Kuo on 04-22-2010 05:03 AM

Maybe you are looking for

  • Installed safari 5, Web Pages aren't coming and showing up

    I have just installed safari 5. I have re started safari and now no web pages are showing up, Safari starts up but I am getting no web Pages, does anyone know what is going on, why this is happening? do I need to turn something off or get rid of some

  • Track information keeps changing

    I have been having this problem for awhile. Every few months or so after I play a track, the album artist category which I always leave blank will be filled with the artists name. The same thing happens with the comments category, however it is much

  • Display Currency tab during General ledger view in T-Code F-53

    Hi When Iam making a payment in foreign currency using T-Code F-53, then on simulation of the document in the General Ledger View (Ctr+F12), Iam trying to press the tab 'Currency' (F9), however, it shows blank, there is no currency visible in it.  Ho

  • Has anyone got a solution to itunes 11 not generating playlists?

    I used to be able to generate genius play lists from iTunes by clicking on the arrow to the right of the song title.   This has become hit and miss - some songs will form the basis of a list, others will not and I am told  'no genius suggestions'.  T

  • Who can tell me the performance of  embber ldap of weblogic700

    how the performance of embbed LDAP of welogic700 campare to other LDAP server,such as IPLANET LDAP. which LDAP server cooperate with weblogic700 have the best performance??