Backup while extending wireless

I set my timecapsule to extend my NON-Airport wireless network: I'm extending a network from a philips router that supports WDS and everything is fine.
But I cannot see the backup drive while I'm connected to the extended network.
Is it possible to enable time machine backup while extending a wireless network?
Thank you,
Daniele (from Italy, sorry for my English)

That is likely because the TC is now invisible..
Can you see the TC at all using airport utility?? If not you cannot do it this way.. that is what I am telling you.. you cannot backup to a TC that is not on the network.
If you can see it with the airport utility make sure that hard disk is set with guest account turned on.
In finder mount the disk in the TC drive.. once you mount the drive TM will be able to find it..
Backups will take days.. and network traffic will come to a halt whilst it is backing up.

Similar Messages

Best way to extend wireless via airport express and time capsule

best way to extend wireless via airport express and time capsule
i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
what do you recommend?
we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
thank you

What you have would appear to be working but I can comment how I would redefine your setup. Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model. The iPhone 4 can use 5 GHz and 802.11n. Can’t comment on the Sony and Samsung but you can check their specs.
Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time. Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz. If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express. Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
Recommend you use the Time Capsule as the Base station. When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”.
Hope that helps.

How do I know "Roaming Network" is working with Airport Express and Airport Extreme and should I use extended wireless network for third Express?

Attempting to eliminate a dead spot in Wifi coverage [and implement AirPlay] have one Airport Extreme 802.11n and two Airport Express 802.11n's.
http://support.apple.com/kb/HT4145
The Airport Extreme is of course connected to cable modem and Ethernet switch, and one Airport Express is connected to the Ethernet network. As per instructions for creating a "Roaming Network", Airport Express is set to same SSID, security type, and Password.
Questions:
1. How does the client device know which Airport to connect to? In other words, will it switch to the closer WiFi transmitter automatically? The WiFi reception problem is intermittent in the fringe areas so what I do not want it for it to stick with the more distant Airport Extreme in the basement when the Airport Express which is closer will work better.
2. How can I tell which of the Airports the attached client device is using?
The third Airport Express will be in a third location - I was planning on using it also for expanding coverage but after reading the warnings about performance suffering when purely using WiFi for the expansion in this location ("Wireless Extended Network" without an ethernet connection) I have figured that the single wired Airport Express will be adequate and will use the third Express to do Airplay only.
http://support.apple.com/kb/HT4259
Question: Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
Mitch

1. How does the client device know which Airport to connect to?
The Mac computer will automatically connect to the wireless access point with the strongest signal...which is probably the closest AirPort. An iPhone or iPad may not do this and will tend to stay connected to one AirPort.
2. How can I tell which of the Airports the attached client device is using?
On a Mac, open Macintosh HD > Applications > Utilities > AirPort Utility. Click on one of AirPorts. In the area to the right, locate the AirPort ID and jot that down. Then do the same for your other AirPort.
Move your Mac near one of the AirPorts and log on to the wireless. Hold down the option key on the Mac while you click the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device to which you are connected.
If you are close to the "remote" AirPort, and you see the AIrPort ID of the "main" router when you are testing, then you know that the network is not configured correctly.
Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
There will be a modest 10-15% bandwidth loss with the "extend" setup, assuming that the Express is located where it can receive a strong wireless signal from the AirPort to which it is associated. You can avoid the bandwidth loss if the Express is also connected via Ethernet as part of the roaming configuration.

Airport Express as very slow in "extend wireless network" mode

Hi!
I am using a Airport Extreme (fourth generation) as a wireless router and a Airport Express 802.11n in "extend wireless network" mode.
I've set the Airport Extreme mode to 802.11n only - and all devices connect to the Airport Extreme as 802.11n Clients properly.
But as soon as they connect to the Airport Express, they only work in 802.11b/g mode (although they are capable of n)
and the connection is very slow - around 1Mb/s:
http://imageshack.us/photo/my-images/804/bildschirmfoto20111211u.png/
Can i force the Airport Express station to accept only "n" connections to speed up my file tranfers?
Thanks for any help!
matt

Where is the AirPort Express located in relation to the area that needs more wireless coverage?
Ideally, it would be at a point that is about half the distance between the AirPort Extreme and the area that needs more wireless coverage....and....there would be no obstructions like walls and/or ceilings in the signal path....tough to do in most homes, so do the best that you can.
Avoid placing the Express down low on the wall and use an extension cord to get it up as high as possible with a free look into the room.
The Express will normally "extend" what it receives, but you could try the following to see if it helps:
Temporarily, change the Wireless Mode setting on the AirPort Express to "Create a wireless network" and change the Radio Mode to "802.11n only".
(You may have to hold down the option key on your Mac while you click on the Radio Mode selection box to see the "802.11n only" choice). Then change the Wireless Mode back to "Extend a wireless network" and Update.

Extending Wireless--a few questions

I posted a while back about needing to extend wireless coverage to an RV about 60 feet from the current router. Well, I finally am getting around to it, but still have a few questions.
I have the Westell A90-9100EM 15-10 model.
I've read the "Can I get an ethernet connection in a room with only coax" article.
So I understand I need a splitter, router and extra cable.
Since I have the Westell, does it matter if I buy another of the exact same model or would the Actiontec MI424-WR work just as well?
The part about reconfiguring it has me a bit confused. Can I hook it up to a laptop to do it, even though I'm receiving wi-fi on that laptop from my present modem?
It sounds like using another Westell involves a bit more configuring, is that correct? If so, then the Actiontec would probably be a bit easier?
Thank you,
TJ

tntpointer wrote:
1) Since I have the Westell, does it matter if I buy another of the exact same model or would the Actiontec MI424-WR work just as well?
2) The part about reconfiguring it has me a bit confused. Can I hook it up to a laptop to do it, even though I'm receiving wi-fi on that laptop from my present modem?
3) It sounds like using another Westell involves a bit more configuring, is that correct? If so, then the Actiontec would probably be a bit easier?
1) It does not matter. Either another Westell or an Actiontec will work.
2) Connect the laptop to the second router. Temporarily disable wireless on the laptop so it's only talking to the second router.
3) Configuration is identical between a Westell and an Actiontec.
Note: The configuration steps in the FAQ you referenced ONLY apply to the second router. Never to the primary router.

Error while extending iSupply Portal VO

I try to extending iSupply Portal PosPosummaryVO by create a new view object, and extend PosPosummaryVO. after sql statement step, I appear a error message
" Each row in the Query Result Columns must be mapped to a uniqe Query Attribute in the Mapped Entity columns."
What does it mean?
I only add a where condidtion in the sql
the sql is
select 'Select_flag' as Select_flag, --> orginal is 'Select_flag', an error occure say it was a key word or existing attr., so I add an as alias
poh.po_num,
poh.comments,
poh.creation_date,
poh.po_release_id,
to_char(null) agent_name,
poh.currency_code,
to_char(0) as amount,
poh.ACCEPTANCE_DUE_DATE,
poh.vendor_id,
poh.po_header_id,
poh.agent_id,
poh.type_lookup_code,
poh.type_name,
poh.vendor_contact_id,
poh.vendor_site_id,
poh.acceptance_required_flag,
poh.approved_date,
poh.revision_num,
to_char(null) PO_STATUS_CODE ,
to_char(null) PO_STATUS_DISP ,
poh.org_name,
poh.attribute1,
poh.attribute2,
poh.attribute3,
poh.attribute4,
poh.attribute5,
poh.attribute6,
poh.attribute7,
poh.attribute8,
poh.attribute9,
poh.attribute10,
poh.attribute11,
poh.attribute12,
poh.attribute13,
poh.attribute14,
poh.attribute15,
poh.attribute_category,
decode(poh.po_release_id,null,'PosHdrAttach','PosRelAttach')
as SwitchAttach,
'N' as retrieve_flag,
poh.CANCEL_FLAG,
poh.CLOSED_CODE,
poh.FROZEN_FLAG,
poh.USER_HOLD_FLAG,
poh.global_agreement_flag,
to_char(null) consigned_consumption_flag,
poh.vendor_name,
poh.vendor_site_code,
poh.po_release_id po_release_id2,
poh.vendor_number ,
poh.vendor_id vendor_id2, org_id,
poh.segment1,
poh.release_num,
to_char(null) business_document_type,
to_char(null) business_document_id,
to_char(null) business_document_version,
0 as ship_to_location_id,
security_level_code,
access_level_code
from pos_view_po_summary_v poh
where poh.type_lookup_code = 'standard' ---> new where condition

Here is the workaround
1. while extending give the query as select 'X' from dual; and finish the extenstion...
2. Right click on the extended VO and select Edit
3. Now paste the original query and Apply the changes
4. Check the attribute mappings as well and correct it..
5. compare the original VO attributes and extended VO attributes. If you find any differences correct it.
--Prasanna

Multipmultiple Airport Extreme Base Stations: WDS Or "Extend Wireless Network" To Have Wired -- Wireless Bridge?

Hello there!
I've been looking for this info, but have as yet been unable to find it. Here's my scenario:
I have two Airport Extreme Base Stations (both are dual band) and 3 airport expresses. The main internet connection in my house is in one room, where I have an AEBS as the main wireless router. In another room, I have a bunch of ethernet-only devices. I'd like to use the 2nd AEBS in this room, plug the ethernet devices into it and have the 2nd AEBS act as a wired <--> wireless bridge (connected to the same wireless network as the 1st AEBS). I've attempted this via "extend a wireless network," but the ethernet devices don't get past the AEBS they're plugged into. Should I instead be implementing WDS?
I mention the airport expresses as I'd like to have airtunes & wireless signal in other areas, but would like to keep the set-up as simple as possible (i.e., not config the AXes for WDS unless it's required).
Thanks in advance for any help!

Unlike the 802.11n AirPort Express Base Station (AXn), the 802.11n AirPort Extreme Base Station (AEBSn) cannot be configured as a wireless Ethernet bridge.
However, there are at least two ways to configure it to provide wired clients access:
Connect the second AEBSn back to the first by Ethernet; reconfigure the second AEBSn as a bridge and disable its wireless radios, or
Reconfigure both AEBSns into an extended wireless network. For 802.11n AirPorts, this would be called a dynamic WDS. The AEBSn, connected to the Internet would be the "main" base station and it would only require that you enable the "Allow this network to be extended" option in the AirPort Utility. The extending AEBSn would need to be configured with the option, Wireless Mode = Extend a wireless network, enabled.
In both configurations, the second AEBSn's Ethernet ports would be enabled for wired clients.

I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network. I select Extend Wireless network but have no success. Ideas?

I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal. The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available. I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play. I got the plug, but no play. I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status. I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times. Then wait 45 seconds and the default settings will return. I did all that, only to find out that after the initial flash of green, green never appeared again. I got a fast flashing yellow light, followed by the light going off. Apparently this didn't reset it properly. So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
highFly376

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

SOLUTION TO Time Capsule and extend wireless network using AEBS, Printers..

Hello GUYS
I find the solution: at least I have extended wireless using TC and old AEBS.
: well everybody have same problems to initialize second AEBS, and set it up.
OK follow this steps:
put next to each other TC (time capsule) and AEBS (airport extreme) -> switch AEBS off
If you followed installation TC correctly it should work without any problem.
SETING UP TC PART 1
pres in finder Command + Shift + U =then click Airport utility
set your TC with manual.
On piece of paper record Airport ID:
Click on TIME CAPSULE
I recommend change name not to use deffault long name for TC. Simply call it TC if you want. Set password.
In wireless. Write a name of your Network, keep it simple TC627 what ever. Write it down on paper. security WPA2 personal and password.
Update. and close utility
End of part 1
Part 2:
AEBS setup.
Switch AEBS on: No need to switch off TC
Press reset button for more than 5 sec. so everything is restore to factory settings.
-> in the bar top click wireless and select AEBS. You have to do this otherwise Airport utility will not recognise AEBS.
When you are done. Command shift U
Click airport utility. and manual setup.
-> write down the Airport ID.
Set up your AEBS, name something simple so you know what it is. Password and security.
Here do yourself favor use the same passwords as on TC and security.
NOW ->
click Wireless.
*Wireless network has to be same as on TC.*( it is on the paper)
Select Participate in wireless network
Radio mode b,g compatible or only N it is up to you.
I setup WPA2Personal again with the same password( same on TC)
Click WDS
Select WDS remote
select Allow wireless clients
and now write the TC airport ID into WDS main: number (it is on your paper)
Update.
switch off utility.
no go to right top and change airport back to TC.
Go to manual
Click Wireless:
Select Participate in WDS Network
Click WDS: wds mode to Main
allow wireless clients: and write into WDS remotes AEBS ID, (it is on the paper).
and update.
both airports will restart.
and you are extended.
You made it. Go to Utility Cmd,shift, U and you should be able to see both airports.
Now what you have to do is to take AEBS to different place.
Put it somewhere in second room. Go back to your computer. Leave it for couple of minutes. 10 -15 is ok.
to make sure your TC can find AEBS. If not TC will indicate by flashing green and orange. = >AEBS has to be closer.
correct is that TC has still green light.
Before you start with time machine: read what files to include
hope it helps.

instructions

The VAT registration number already exist while extending the CMR

Hi All,
We are already having a customer master record for two sales area(one for spain and another one for Netherland). Now we are extending the customer to a new sales area for the country Romania.
But while extending the customer we are getting the error message "The VAT registration number already exist".
Awiting your reply.
Thanks in advance.
Sushanta

Hi,
Just make sure that your customer basic country belong to the European Union. You need to select the OTHER Tab of the Vat Registration number . Enter Romania and its respective VAT number.
Just try this and let me know if it working or Not.
Regards
Balachandar

While Extending VO getting Error

Dear All,
I am trying to extend VO, But I am Getting following Error while extending VO.
"Each Row in the Query Result Columns must be mapped to a Unique query Attribute in the Mapped Entity Columns". Pls suggest.
Thanks in Advance,
Hanimi.

Re: Extending View Object
http://forums.oracle.com/forums/search.jspa?threadID=&q=ach+Row+in+the+Query+Result+Columns+must+be+mapped+to+a+Unique+query+Attribute+in+the+Mapped+Entity&objID=f210&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks
--Anil
http://oracleanil.blogspot.com/

Geting error While Extending VO

Hi all
am extending vo to add one column...
am geting an error like
"Each row in the query result columns must be maped to a unique query attribute in the mapped entity columns"
Any help.
Regards
Harrrry

Hii user11985005/Depak
Now the VO is geting extended....that error has gone "Each row in the query result columns must be maped to a unique query attribute in the mapped entity columns"
but after extending the VO am geting another error which am very confused why its throwing error "Failed to load value at index 86 with java object of type java.lang.String due to java.sql.SQLException."
any pointer on this......
For those guys whose are facing the same issue("Each row in the query result columns must be maped to a unique query attribute in the mapped entity columns")
just giv a try what i did...coz i solved my problem by this way only...but i wondered why its hapening like this...
while extending the VO i didn't modified the query...simply i just clicked next button(just to see weather the seeded VO is throwing an error or not)...finaly again i came back by clicking Back buton..in query stmt i had given the modified query
and surprisingly its get created....
Regards
Harrrry

Is it possible to delete your iCloud backup while you're restoring from it?

I was restoring my phone from an iCloud backup when all of a sudden my phone kept yelling at me that my iCloud storage was full. I mindlessly deleted the OLD backup from which I was restoring from to make room for the new one. I'm not sure if my phone was completely finished with restoring and wanted to know if it was possible to delete an iCloud backup while restoring.
Thanks!
Edit: sorry for saying "restoring" so many times in three sentences !

Okay thank you so much! Before my restore, I only had ~0.3gb free on my phone and now I have 3gb so I thought it was because the restore didn't complete. I guess it was because not everything was backed to iCloud!

Error while extending ProfileFormHandler

Hi please help me out this problem...while extending profileformhandler i am getting nullpointerexception...
16:21:16,396 ERROR [DynamoServlet]
java.lang.NullPointerException
        at atg.userprofiling.ProfileFormHandler.getRepositoryId(ProfileFormHandler.java:111)
        at atg.userprofiling.ProfileForm.getProfileItem(ProfileForm.java:278)
        at atg.userprofiling.ProfileFormHashtable.getItem(ProfileForm.java:3921)
        at atg.userprofiling.ProfileFormHashtablePropertyMapper.getPropertyValue(ProfileForm.java:3956)
        at atg.droplet.DropletDescriptor.getPropertyValue(DropletDescriptor.java:457)
        at atg.droplet.DropletDescriptor.getPropertyStringValue(DropletDescriptor.java:245)
        at atg.droplet.DropletDescriptor.getPropertyHtmlStringValue(DropletDescriptor.java:166)
        at atg.taglib.dspjsp.ValueStringTag.calculateValueString(ValueStringTag.java:358)
        at atg.taglib.dspjsp.InputTagBase.doEndTag(InputTagBase.java:476)
        at org.apache.jsp.createProfile_jsp._jspx_meth_dsp_005finput_005f0(createProfile_jsp.java:523)
        at org.apache.jsp.createProfile_jsp._jspx_meth_dsp_005fform_005f0(createProfile_jsp.java:293)
        at org.apache.jsp.createProfile_jsp._jspx_meth_dsp_005fpage_005f0(createProfile_jsp.java:216)
        at org.apache.jsp.createProfile_jsp._jspService(createProfile_jsp.java:122)
        at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
        at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:369)
        at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:322)
        at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
        at atg.servlet.pipeline.TailPipelineServlet.service(TailPipelineServlet.java:161)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.servlet.pipeline.DispatcherPipelineServletImpl.service(DispatcherPipelineServletImpl.java:253)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.servlet.http.CookieBufferServlet.service(CookieBufferServlet.java:97)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.userprofiling.ExpiredPasswordServlet.service(ExpiredPasswordServlet.java:356)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.servlet.pipeline.MimeTyperPipelineServlet.service(MimeTyperPipelineServlet.java:206)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.droplet.DropletEventServlet.service(DropletEventServlet.java:565)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.commerce.order.CommerceCommandServlet.service(CommerceCommandServlet.java:128)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.commerce.promotion.PromotionServlet.service(PromotionServlet.java:191)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.userprofiling.AccessControlServlet.service(AccessControlServlet.java:655)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.servlet.sessionsaver.SessionSaverServlet.service(SessionSaverServlet.java:2425)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.userprofiling.PageEventTriggerPipelineServlet.service(PageEventTriggerPipelineServlet.java:169)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.multisite.SiteSessionEventTriggerPipelineServlet.service(SiteSessionEventTriggerPipelineServlet.java:139)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.userprofiling.SessionEventTrigger.service(SessionEventTrigger.java:477)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.userprofiling.ProfilePropertyServlet.service(ProfilePropertyServlet.java:208)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.userprofiling.ProfileRequestServlet.service(ProfileRequestServlet.java:437)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.servlet.pipeline.DynamoPipelineServlet.service(DynamoPipelineServlet.java:469)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.servlet.pipeline.URLArgumentPipelineServlet.service(URLArgumentPipelineServlet.java:280)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.servlet.pipeline.PathAuthenticationPipelineServlet.service(PathAuthenticationPipelineServlet.java:370)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.userprofiling.sso.PassportServlet.service(PassportServlet.java:554)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.servlet.security.ThreadUserBinderServlet.service(ThreadUserBinderServlet.java:91)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.dtm.TransactionPipelineServlet.service(TransactionPipelineServlet.java:212)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.multisite.SiteContextPipelineServlet.service(SiteContextPipelineServlet.java:348)
        at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
        at atg.servlet.pipeline.HeadPipelineServlet.passRequest(HeadPipelineServlet.java:1174)
        at atg.servlet.pipeline.HeadPipelineServlet.service(HeadPipelineServlet.java:857)
        at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:250)
        at atg.filter.dspjsp.PageFilter.doFilter(PageFilter.java:263)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
        at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:235)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
        at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:190)
        at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:92)
        at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.process(SecurityContextEstablishmentValve.java:126
        at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invoke(SecurityContextEstablishmentValve.java:70)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
        at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
        at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
        at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:330)
        at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:829)
        at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:598)
        at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
        at java.lang.Thread.run(Thread.java:662)

Thank you David_DE.....I gone through entire Profile doc....and i set those property file as : -
$class=atg.userprofiling.ProfileFormHandler
$scope=request
profile=Profile
profileTools=/atg/userprofiling/ProfileTools
but
now getting this exception...
java.lang.NullPointerException
atg.userprofiling.ProfileFormHandler.assumeSecurityIdentity(ProfileFormHandler.java:1072)
atg.userprofiling.ProfileFormHandler.postCreateUser(ProfileFormHandler.java:480)
atg.userprofiling.ProfileForm.handleCreate(ProfileForm.java:1115)
atg.userprofiling.ProfileFormHandler.handleCreate(ProfileFormHandler.java:380)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
atg.droplet.EventSender.sendEvent(EventSender.java:582)
atg.droplet.FormTag.doSendEvents(FormTag.java:800)
atg.droplet.FormTag.sendEvents(FormTag.java:649)
atg.droplet.DropletEventServlet.sendEvents(DropletEventServlet.java:523)
atg.droplet.DropletEventServlet.service(DropletEventServlet.java:550)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.commerce.order.CommerceCommandServlet.service(CommerceCommandServlet.java:128)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.commerce.promotion.PromotionServlet.service(PromotionServlet.java:191)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.userprofiling.AccessControlServlet.service(AccessControlServlet.java:655)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.servlet.sessionsaver.SessionSaverServlet.service(SessionSaverServlet.java:2425)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.userprofiling.PageEventTriggerPipelineServlet.service(PageEventTriggerPipelineServlet.java:169)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.multisite.SiteSessionEventTriggerPipelineServlet.service(SiteSessionEventTriggerPipelineServlet.java:139)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.userprofiling.SessionEventTrigger.service(SessionEventTrigger.java:477)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.userprofiling.ProfilePropertyServlet.service(ProfilePropertyServlet.java:208)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.userprofiling.ProfileRequestServlet.service(ProfileRequestServlet.java:437)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.servlet.pipeline.DynamoPipelineServlet.service(DynamoPipelineServlet.java:469)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.servlet.pipeline.URLArgumentPipelineServlet.service(URLArgumentPipelineServlet.java:280)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.servlet.pipeline.PathAuthenticationPipelineServlet.service(PathAuthenticationPipelineServlet.java:370)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.userprofiling.sso.PassportServlet.service(PassportServlet.java:554)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.servlet.security.ThreadUserBinderServlet.service(ThreadUserBinderServlet.java:91)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.dtm.TransactionPipelineServlet.service(TransactionPipelineServlet.java:212)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.multisite.SiteContextPipelineServlet.service(SiteContextPipelineServlet.java:348)
atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:135)
atg.servlet.pipeline.HeadPipelineServlet.passRequest(HeadPipelineServlet.java:1174)
atg.servlet.pipeline.HeadPipelineServlet.service(HeadPipelineServlet.java:857)
atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:250)
atg.filter.dspjsp.PageFilter.doFilter(PageFilter.java:263)
org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)

Getting CFGFWK-64060 error while extending a domain for ECM..

Hi,
I am getting this error while extending a weblogic domain for Oracle ECM.
CFGFWK-64060 the template you selected can't be applied because the following dependencies can not be satisfied.
Missing prerequisites:
DEP for Oracle UCM Core Template:11.1.1.0[C:\Oracle\Middleware\Oracle_ECM1\common\teplates\applications\oracle.core_template_11.1.1.jar] (Oracle Enterprise manager)
Thanks in advance

Hi,
I am getting this error while extending a weblogic domain for Oracle ECM.
CFGFWK-64060 the template you selected can't be applied because the following dependencies can not be satisfied.
Missing prerequisites:
DEP for Oracle UCM Core Template:11.1.1.0[C:\Oracle\Middleware\Oracle_ECM1\common\teplates\applications\oracle.core_template_11.1.1.jar] (Oracle Enterprise manager)
Thanks in advance

Backup while extending wireless

Similar Messages

Maybe you are looking for