Backups do not appear in the Time Machine "time travel window
After reinstalling my complete system (10.5.8) from the TM backup everything works fine except, in the time travel window only the backups after the complete reinstall show up. Anything earlier is grayed out. Opening the backup HD shows everything being there.
I did check the TM help to no avail.
Any ideas anybody?
Hi, and welcome to the forums.
TM has apparently started a new "sequence" of backups. See #E1 in the Time Machine - Troubleshooting *User Tip* at the top of this forum.
Similar Messages
-
BED(14%) not appearing at the time of creation of Export Sales Excise Inv
Dear All,
While creation of excise invoice for export sales the BED(14%) is not appearing in the excise invoice however Sec Cess (2%)and Higher Sec cess (1%) are appearing.
If I create an excise invoice for normal sales then all the 3 Values are coming please suggest what needs to be done with regards to my excise invoice for export sales.
Best Regards
Atul Keshav.Dear Atul,
Go to tax on good movement, - basic setting - default excise conditions for you procedure ie taxinn or taxinj - maintain your jexp or jex2. same way check your excise group - series group setting and also your delivery and billing condition types for export in taxon goods movement.
regards,
Sudhir
Edited by: Sudhir Nair(India) on Nov 21, 2008 12:08 PM -
Dear All,
At the time of PR value change after creation of PO budget exceeded error is not appearing even though the PR value exceeds the budget. But at the time of changing the same value in PO, budget exceeded error is appearing.
List of steps:
PR created.
PR released
PO created with reference to PR and released.
PR value changed to a value more than the available budget - No budget exceeded error.
PO value changed in accordance with the PR - System throwing the budget exceeded error.
Now the issue is why the system bypassed the budget exceeded error at the time of PR value change and only giving the error at the time of PO value change. Also, we observed that while changing the quantity in PR which results in exceeding budget, system is giving the error. But while changing the value system is not giving the budget exceeded error.
Your inputs will be highly appreciated. Thanks in advance.Hello Saurabh,
Thank you for your inputs. Below is the output of CJI5.
Ref,Doc Category Debit Date Oty Object Cost Elem. Val/CO Area Crcy Total Qty. UM
PREQ 28.05.2014 WBS XXXXXX XXXXXX 0.00 0 EA
POrd 28.05.2014 WBS 14,000.00 1000 EA
From the above output i think system is not capturing the PR commitment. I'm not sure as i'm basically into MM and dont know much about PS.
Why the system is stopping with budget exceeded error at the time of PR creation and not giving any error while changing the PR value after PO creation. System is giving budget exceeded error if quantity is changed in PR. Please explain the standard system behavior and suggest how to enable control at the time of PR value change.
Thanks in advance. -
Progress bar in the portal does not appear all the time when loading
Hello All,
I have a dashboard in EP, when I click on it the majority of the time a progress bar appears when it is loading. Some time it does not, the page just appears to be doing nothing, then the dashboard will appear.
Any one else seen this issue?
ThanksHai check whether your using the latest EP patch levels that may solve your issue.
GoodDay. -
I have tried the suggestions posted in mozilla support for removing Yahoo from the new tab and the default search, but I have not been successful. So, I thought I would uninstall Firefox from my computer and make a clean install. However Mozilla Firefox does not appear as one of my Currently installed programs in Control Panel\ Add or Remove Programs, and C:\Program Files\Mozilla Firefox\uninstall\helper.exe does not open or run. I fear I may have been the victim of some ?Yahoo malware. Any suggestions gratefully received.
I have Firefox 22.0 and my computer runs XP sp3.Do you have the Default Tab extension?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved -
Text & Image in form Header - Image not appearing all the time
Hi,
I saw a couple of other discussions in the Community, but didn't see an answer anywhere? I am putting my logo (jpg, 283kb) with Text in my header and while it appears when designing in FormsCentral, when I save as PDF it doesn't appear when viewing in Adobe Acrobat Pro XI
Please help, thanks in advance for it!This is more than likely an issue with the color profile in the image you used not being supported by the PDF - this FAQ describes the issue and ways to fix it:
http://forums.adobe.com/docs/DOC-4144
Thanks,
Josh -
Time Machine shows that it's backing up every day. It recognizes my selected backup drive. The backups appear in that external drive.
However today I opened the Time Travel Window and it says, No Backups Available.
Whazzup?Unmount and remount the drive. Same thing?
-
NO "Time Travel" Window/ Can't restore!
My external HD is accepting backups, but when I open it now, I am not getting the "Time Travel" window showing past backups and the option to Restore. It IS backing properly. Any help most appreciated!
As I recall, when I first started TM back in Nov., nothing showed for many hours after the all night initial backup. Later everything worked. How many hourly backups have you had following the initial backup?
Also, how are you starting TM wayback? Are you viewing the desktop and then invoke TM? That should work. -
Time Machine appears to be doing back-ups, but they do not appear on the external hard drive. The last one I can find is June 30. I did a utility scan of the hard drive disk and it is fine. What do I do?
Click the Time Machine icon in the menu bar. The time of the last backup is shown in the drop down.
-
I currently have a mini server (OSX10.8.5, server 2.2.2) that I am using Time Machine to back up 4 external drives that are connected to the server via firewire 800. I would like to use Time Machine to back up to a windows network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it for use.
Can this be done
Thanks for any and all helpThe supported targets for Time Machine backups are local (direct-connected) disks, and network targets include Time Capsule, a disk hanging off the current-generation AirPort (though not earlier AirPort devices), and OS X Server systems.
The Time Machine storage is based on the HFS+ file system, so I would not expect TM to work with SMB file services.
While there are hacks to allow Time Machine to access network drives, I would not consider those to be reliable. Skim the forum and the 'net for related details, and for previous discussions of setting this up and the related issues that can arise.
Remember to test the recovery with whatever you decide to use; whole point of backups is the ability to restore the data, after all.
If you want to learn more about Time Machine, Pondini is an excellent resource. -
Time capsule does not appear in the finder.
My time capsule appears in airport utility. It is ready to go. I have it on ethernet because airport isn't a very powerful wireless router. The time capsule does not appear in the finder. It does not appear in the disc utility. It does not appear in time machine. The airport utility will do factory resets, get it ready for internet, whatever. The rest of my net work can not see it.
I have done the finder preferences. I have restarted the computer, jiggered the sharing preferences, done factory resets, tried to find sparce bundles and sparse bundles, reset the finder, force quit finder, tried to find finder plsts, trawled the discussion pages, tried to find server addresses and apple ids. Nothing seems to work.
Time capsule never seems to work as smoothly as it supposed to. I shudder to present my problems to apple support because I know that its a long road and will probably end in tears. But here I am, naked before this disappointing edifice.
Does anyone have any ideas?What is the make and model number of your modem?
I have a microwave modem on my roof. I don't think that has anything to do with this. I am not using my airport for a wireless router, only as a time capsule connected by ethernet. The Airport Utility calls my airport : Airport Extreme 802.11 ( 1st Generation )
Is the Time Capsule acting as your main router or is another device handling those services?
No, I have a lyncsis router. The wireless router function on airports doesn't seem to work very well. I don't think thats a problem with mine. My brothers have gone with lyncsis as well.
Was the Time Capsule visible in the Finder before, and is now "lost", or has it never appeared in the Finder?
It appeared on my previous laptop. That died. Now I have an imac. The airport has never appeared on the imac.
Thanks for trying to help so quickly
JOhn -
Lead time values are not appearing in the report for current year.
Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman -
I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.
Hi Emilemny,
Welcome to Apple Support Communities.
The TouchID settings will not be available until you create a passcode, see the article linked below for more information.
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
-Jason -
I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time. Also, sometimes my animations (applications opening, windows being dragged, etc.) will glitch as well. Again, this is not a continual thing; it just happens variously throughout my day. MBP Model A1212, OS X 10.6.8, 2.33 Ghz 3GB RAM.
Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store
-
Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB" (usb device tree)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x18
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x19
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f
Maybe you are looking for
-
Automatic reflection of changes in JSP pages in R12i
As per note metalink note 458338.1, i have set the main_mode from justrun to recompile in context file and run autoconfig. Also confirmed for the entry in $INST_TOP /ora/10.1.3/j2ee/oacore/application-deployments/oacore/html/orion-web.xml file. Still
-
Background: In sqldeveloper 3.1.07 I have a number of views that concatenate the data from several fields to reduce multiple rows to a single row of comma delimited numbers. For example 10 records for Item #1 might contain a list of 10 different asse
-
How do you reference cells on a different spreadsheet?
I would like to reference or lookup data in cells on a different spreadsheet/workbook. Is there a way to do this? I do not mean referencing a cell on a sheet within a single spreadsheet/workbook.
-
Skype Version 6.22.59.107 will not connect
I updated my skype yesterday, but now I cannot connect to the server! I've tried re-downloading, downloading older versions, shutting down my computer and leaving it for a while, updating windows 8, but none of that worked! I have the latest version
-
How to Integrate Epic and Crystal Reports
Hi, My hospital uses both Epic and Cerner Reporting. As a business objects admin I was asked to integrate Epic with Crystal Reports. I'm Using BOE XI 3.1 and Crystal Reports 2008, I want a planning to integrate my Crystal reports server with Epic