Backups lost time capsule unplugged
Hi everyone...
I have a small problem with my Time Capsule. The last few days kept crashing so i decided to perform a "reset" and unplugged it to plug it in again after a few seconds. It eventualy seemed it worked thou it worked fine.
One week later, same problem and same "reset".
Today I was working on my computer and when I wanted to get something from the time machine, surprise! It doesn't work. Not only that, in the Time machine preferences shows that there are no bakups any more!!!
I've checked in the finder if the time capsule is still there in the finder and it is. It's a 2TB time capsule and it shows only 500GB free space so my understanding is that the back ups are still in there but I have no idea how to make it work so it recognises it again...
Any suggestions?
Thanks a lot
What OS are you running.. ?? I am sure it is mountain lion but need you to confirm.
The loss of the TC on occasion is not surprising on ML but rather standard network bug. You just need to reboot the TC when it happens.. ie unplug power.. count to 10.. plug in power.
If you keep having issues.. do a factory reset on the TC.. and redo the setup.. use all SMB names.. for the TC itself, wireless and hard disk share name.
You can reset TM as well.. see A4. http://pondini.org/TM/Troubleshooting.html
No reset will do any harm to the existing backups.. Setup TM again and point it to the TC as backup target.
Use ethernet even if you normally have a wireless connection because TM may need to do a deep scan of the backup. This will take many many hours or even days for 1.5TB over wireless.
I suggest you read through some of the Pondini FAQ and troubleshooting as he has a lot of info to help understand what is going on.
Similar Messages
-
Lost my Popular Folder from my Favorites Bar in Safari; have a full backup on time capsule; How do I restore those needed web addresses?
Daniel ..
Try this discussion > Restoring bookmarks from time machine -
Time Machine Backup to Time Capsule Pauses Airtunes
Hello,
I have an Airport Express and a MBP which are both wireless clients of a Time Capsule. I use the AX to stream music to my stereo which usually works without any trouble.
The annoying thing is that practically every time Time Machine starts a backup, the music pauses for about a second as if the connection to the AX is lost.
Has anyone else come across this issue and, if so, do you have a solution?
Thanks
SimonWell, I found a fix. I first moved the com.apple.TimeMachine.plist file from the Preference folder to the desktop, just in case I needed in the future (it turns out I didn't). Then I rebooted my computer. Time Machine did not find the .plist file and so I had to select again the disk for backup on Time Capsule. Then I backed up and it finally completed the hourly backup and now it seems back on track with the hourly backups
-
I have four Mac computers that are being backed up to a 2TB Time Capsule. I want to know if I can now backup the Time Capsule to an external hard drive. I would like to purchase a Seatgate Backup Plus 4TB Desktop Drive, STCA4000100, to do the job. In simple terms, I want to backup my backup. Does any of this make sense?
Just to add to Bob's comments it would be extremely slow. If you backup the TC 3TB to another drive.. there is no need for a drive bigger than 3TB..btw..
Because the TC cannot back itself up.. at least not incrementals, you need to run the application from a computer.. Bob listed suitable ones,, if you plug the drive into the TC, the files will be copied from TC to the computer then back to the TC and to the extremely slow USB interface. It is better to have the USB disk connected to the fastest interface hopefully USB3 on some computer.
IMHO if you are backing up the TM backups.. any corruption in the backup is then copied straight to the backup of the backups.. you are much better doing a backup fresh and use CCC or superduper to do it so you are using two different softwares. You can also store a couple of disk images of various dates..
One nasty habit of TM is to delete a backup if it discovers it is corrupted in some way.. so all that hard effort in having dated backups is lost in a moment. -
I am trying to update my time machine backup on time capsule, but time machine keeps trying to create an entirely new backup (evidenced by the 200GB backup size). How can I get time machine to modify my old backup rather than create a new one?
It must have found the old backup corrupt.. so you will more than likely have little choice. You can archive off the old backup if it is still useful.
You can also verify it. See A5 http://pondini.org/TM/Troubleshooting.html
He also has some info on this problem. eg C13. -
I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.
On your Mac.......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click on the Disks tab at the top of the window
Click Erase Disk
On the next window that appears, select the Quick Erase option, then click Erase
The operation will only take a few minutes.
Now you are ready to start new backups of both Macs. Back up one Mac first, then back up the other. Do not try to back up both Macs as the same time. -
How to backup from Time Capsule to external HD?
How to set up files backup from Time Capsule to external HD?
Here is configuration: MacBook + MacAir + Time Capsule (which I use as a storage) + 2Tb WD MyPassport (USB connected to TimeCapsule)
I keep files like photos on TimeCapsule to be available by WiFi and I want to set up my Time Machine to backup picture folder from TimeCapsule to MyPassport HD.Time Machine can't back up a network volume. You'll have to use third-party software. I don't have a specific recommendation. There is no efficient way at all to back up a Time Capsule, which is why it should only be used as a backup destination, not as a general-purpose file server.
-
Time Machine couldn't complete the backup to time capsule-the backup disk is not available
Time Machine couldn’t complete the backup to time capsule-the backup disk is not available
Reboot the network in correct order.. modem.. router/TC.. clients.. 2min gap.
This is just standard windows.. woops, Mac OS networking now. -
Suddenly extremely slow Time Machine backups on Time Capsule
My Time Machine backups on Time Capsule have been pretty good in the last few months. In the last week or so I am seeing painfully slow backups. It's not the preparing or the finishing phase, it's the backup itself. Data transfer for other apps is fine. The backup transfers about 50 Kb per second. In more than 3 hours it backed up about 600 Mb. Here's what I get from the Console:
11/26/08 4:22:07 PM /System/Library/CoreServices/backupd[1281] No pre-backup thinning needed: 1.28 GB requested (including padding), 730.31 GB available
11/26/08 5:50:47 PM /System/Library/CoreServices/backupd[1281] Bulk setting Spotlight attributes failed.
11/26/08 6:12:40 PM /System/Library/CoreServices/backupd[1281] Bulk setting Spotlight attributes failed.
11/26/08 6:51:37 PM /System/Library/CoreServices/backupd[1281] Bulk setting Spotlight attributes failed.
11/26/08 7:05:44 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:05:46 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:05:46 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:07:05 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:07:05 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:09:06 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:09:13 PM /System/Library/CoreServices/backupd[1281] Error: (-39) SrcErr:YES Copying (null) to (null)
11/26/08 7:09:14 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:09:14 PM /System/Library/CoreServices/backupd[1281] Unable to rebuild path cache for source item. Partial source path:
11/26/08 7:12:15 PM /System/Library/CoreServices/backupd[1281] Bulk setting Spotlight attributes failed.
Any clue? What happened? (I did an Airport-related upgrade recently)
My set up is a Time Capsule and an Airport Extreme.Well, this link has a video describing a downgrade:
http://www.mefeedia.com/entry/airport-extreme-and-time-capsule-firmware-downgrad ing/11537477/
It has been mentioned in apple discussions here as well, but with no other information than that it has helped some people.
Message was edited by: Karl Ivar Dahl -
My backup to Time Capsule is taking over 4 million days. How can I shorten the time? I am not able to connect through ethernet. How do I fix this?
Not only that but my Mac Pro keep running and does not stop, my Address book has a blue light under it but wont open, the light for my monitor in the bottom right corner wont turn on or off. Please need help...It sounds like there is an issue with the Mac itself.
Use the verify disk A5 in troubleshooting.
http://pondini.org/TM/Troubleshooting.html
Even if you cannot connect by ethernet, at current location.. you can simply disconnect the TC from the network and bring it to the Mac and plug it in by ethernet. The TC can be reset if you haven't got a suitable current setup (save previous setup before you change it) and run just as backup device.. do the backup and then return it to the network.
If this is just a standard incremental backup.. then something has broken. The issue is not the TC pe se but failure in hardware somewhere. -
Kernel panic with wifi backup to Time Capsule
I have had no problem with wireless backup to Time Capsule until recently when I would consistently get a kernel panic during the backup. Is it a corrupt file? How would I isolate it? Or could it be a directory problem that DiskWarrior would fix? I can mount the backup image on my desktop OK.
I suppose I could erase my backup image on the Time Capsule, but I dont want to lose all that data. And if I did, what is the best way to archive that TIme Capsule backup image?
Thanks for any help.Arthur Simonsen wrote:
I have had no problem with wireless backup to Time Capsule until recently when I would consistently get a kernel panic during the backup. Is it a corrupt file? How would I isolate it? Or could it be a directory problem that DiskWarrior would fix? I can mount the backup image on my desktop OK.
First, Repair your backups per #A5 in the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.
If that doesn't help, here's a bunch of kernel panic info:
Apple Support - About kernel panic messages
Mac OS X Kernel Panic FAQ
The X Lab - Resolving Kernel Panics
Apple Developer - Technical Note TN2063: Understanding and Debugging Kernel Panics
Tutorial: Avoiding and eliminating Kernel panics
I suppose I could erase my backup image on the Time Capsule, but I dont want to lose all that data. And if I did, what is the best way to archive that TIme Capsule backup image?
If your backups are ok, erasing the drive probably won't help. But to "archive" the backups, see this Apple article: http://support.apple.com/kb/HT1281 -
How does one replace a lost Time Capsule power cord? thanks
how does one replace a lost Time Capsule power cord? thanks
It is a standard figure8 power cable.. any electronic retailer will stock them.
You will find it hard to get white.. they are all black.. you can ask at apple store or repairer.. I don't think it is sold as an accessory.. but a repair shop might have a few. -
I have got a Time Capsule for making backups of all my devices. In addition I want to regularly backup the Time Capsule itself, however at another address, for abvious safety reasons. What are my options?
The TC has no built in backup.. as you would normally define it.
It has archive.. You plug a USB disk of equal size or larger than the data on the TC, and press archive in the airport utility. It backs up the entire disk.. for large disks it takes 12-24hours.. during that time no backup is possible to the TC. There is no incremental.. no nice rsync.. no attempt to make TM useful.. since it cannot backup network drives.
You can also buy CCC and backup to another disk plugged into the computer.. or a different network drive. But all packets go through the computer.
If you are making a backup of TM backups .. don't bother..
Use TM to backup to multiple destinations..
Or use a different backup software like CCC which is far better to recover with if you need a whole drive restored. -
We are Mountain Lion using Time Machine to backup to Time Capsule. When the backup tries to run, an error appears after a couple of minutes saying "The disk you inserted was not readable by this computer." Then an error shows up saying "Time Machine couldn't complete the backup to "Time Capsule.The backup disk image /Volumes/Data/MacBook Pro.sparsebundle could not be created (error 60)"
I low level reformatted the Time Capsule and that didn't fix it. I then tried using Time Machine on another computer to back up to that same Time Capsule and it worked- so I'm doubting it's the Time Capsule.
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
However, after a couple of minutes- it comes back saying that the disk is unreadable.
I think it's something wrong with either creating the sparsebundle or opening the disk image that seems to be a part of the Time Machine backup process on the local drive.
I am able to create a disk image with Disk Utilitiy without any problem on that system. I've repaired the disk and disk permissions with Disk Utility and replaced the directory with Disk Warrior. I've trashed what preference files I could find and restarted. I've completely removed the backup destination from the computer and added it back again.
Help!
Thanks,
Neilneillhowell wrote:
I've noticed that when Time Machine runs, that a folder called Data at /Volumes/ appears while Time Machine is trying to back up. I think it's making the sparsebundle to transfer to the Time Capsule.
Yes, exactly. It makes one sparse bundle per Mac.
It's possible the TC's disk is too full for a new sparse bundle, or there may be some other problem.
Via the Finder, locate the existing sparse bundle (see the pink box in Time Machine - Frequently Asked Question #17 if you're not sure how to do that). See how large it is (plus how large anything else that may be there). If the total is very near the size of the TC, that may be the problem.
If not, a clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question (probably the first one displayed), then copy and post all the messages here. -
I've received an error message Time Machine couldn't complete the backup to Time Capsule, the backup disk image /Volumes/Date/....MacBook Pro.sparsebundle" is already in use. Any suggestions as to what I can do to fix it?
I've got mine working again by deleting a partial backup that was on the Time Capsule.
I mounted the backup sparsebundle, and then browsed the content and found a filestucture named <timstamp>.inProgress. I removed that and the followed the tip to disconnect described above. That did the trick for me.
Maybe you are looking for
-
Mid-2011 MacBook Air EFI still messed up 8-9-14
Ok, so now my MacBook Air reboots itself while the clamshell is shut. Last time it had been shut for a couple of hours when I heard the OS X reboot noise. Now, I'm getting a Sleep Error...
-
How can I tell if my Mac Mini has what it takes to support Windows XP OS?
I need some help understanding how the whole Windows OS thing works with my Mac mini. I'm totally clueless about it. The first thing I would like to know is if my Mac has enough memory & power to accommodate the additional Windows OS without compromi
-
just became a Mac convert. how do i move my itunes library from my PC desktop to my MacBook? thanks
-
Hi, How to block the condition types in purchasing. Users should not be able to enter the blocked condition types in condition tab of Purchase order. Thanks, Srinivas
-
Iphoto doesn't recognize iphone or Ipad won't sync how can I fixt it?
my iphone and ipad stopped sync ing with iphoto