Backups of configuration of portfolio and questionaries
Hello All
I have a question, I found a problem when I update the support package cprxrpm en el backend and cprxrpmUI in Portal , the confguration of portfolio and questionaries are lost and the functional team should re configure again.
What`s the process for to get the backups of any configuration of the portal??
Thansk a lot
Danny
HI all
This link will be to help
http://help.sap.com/saphelp_xrpm400/helpdata/en/index_rpm.htm
Regards
Danny
Similar Messages
-
Configurator restore backup loses iPad Restrictions password and email password.
I am using configurator. I have experienced progress, yeah! I have 12 iPads. The one I setup with perfect settings and apps is named, A1.
I have successfully created a backup of A1, and call it Configurator Master BU.
When I supervise my remaining iPads, A2-A12, I have it set to restore from the above mentioned backup.I plug them in, and click apply. Even if an app was deleted, it comes back. Yeah! Since I am restoring from a backup of an iPad that was already configured, I don't get the iOS setup assistant anymore. Yeah!
I created a profile, and tried to set up a gmail email account there. The imap.gmail.com incoming email server just wouldn't work! So I decided to delete that 'payload' and go set up the email on A1 through Account settings. On the iPad A1, I also enabled Settings->General->Restrictions and set a password. I restricted allowing the users to change the email accounts. A1 works great.
The restored iPads do not.
When checking email, it says the account doesn't have a password.
When you go to settings, the account info is greyed-out.
When you go to restrictions, they are greyed out, except that you can select "enable restrictions".
Once you do that, you can go back in and set the email password.
How can I convince Configurator to keep the email and restrictions passwords when I restore form backups?
Thank you!
Taylor.Okay so the Restrictions thing has been bugging me because I know I've been able to have restrictions set without having to manually do it one by one. So I set up a test lab here of 5 iPads. Wiped them all and started new.
I took one iPad (we'll call it A1). Went through the setup process, selecting country, wifi, terms, etc. Once the home screen came up, I set a restrictions password and set some restrictions. Then I launched iTunes and plugged A1 into the MacBook. I made an Encrypted Backup of A1. Ejected A1. Closed iTunes. Launched Apple Configurator. Took iPads A2-A5 and Supervised them (not restoring any backup). Then I launched iTunes. A2-A5 show up in iTunes. Then I restored the iTunes Encrypted Backup to A2-A5 (one at a time…ugh). After they finished restoring, I quit iTunes and launched Apple Configurator again. In the Supervise tab, I added apps and configuration profiles. They all installed seamlessly. I checked A2-A5 and the restrictions are all set on A2-A5.
The drawback here is that you can't restore a Supervised backup to your iPads…only add/remove profiles and apps with Configurator. If an iPad ever needs a full backup restored, you would need to do it via iTunes Encrypted Backup in order for the Restrictions to hold. If you try to restore a Supervised backup with Configurator then you'll reset the Restrictions.
Its kind of a roundabout way of doing it, but at least you won't have to manually set restrictions on every single iPad.
~Joe -
Difference between pool pair relationship and Backup registrar configuration
Hi,
I would like to difference between pool pair relationship and Backup registrar configuration?
Are both concepts are reffering same for DR site resiliency in Lync 2013?
ThanksBackup Registrar works the same in Lync 2013 as it did in Lync 2010. This allows for registration in the event the primary registrar is unavailable. Pool Pairing is built on top of the Backup Registrar functionality.
Take a look at the following:
Backup Registrar Functionality in Lync Server 2013: http://blogs.technet.com/b/dodeitte/archive/2012/08/08/backup-registrar-functionality-in-lync-server-2013.aspx
Lync Paired Pools - Why it Matters: http://blogs.perficient.com/microsoft/2012/12/paired-pools-why-it-matters/
Backup Registrar relationships in Lync Server 2013: http://technet.microsoft.com/en-us/library/jj205033.aspx
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013. -
Error in Backups custom configuration
Hello
I'm doing a backup of portfolio 's configuration in portal.Then I found the steps for this task:
You navigate to this iView by choosing Portfolio Management ® Administration. In the navigation panel, choose Backup Custom Configurations.
To backup configuration(s) do the following:
1. Select the configuration from the list:
a. To select a single configuration from a list, click the corresponding checkbox.
b. To select multiple configurations, hold down the CTRL key and click the checkboxes corresponding to the configurations.
c. To select a block of configurations, hold down the SHIFT key and check the first and last configuration of the block.
d. Choose Select All to select all configurations.
e. Choose Unselect All to de-select all configurations.
2. Click Next at the bottom of the list. The selected configurations are displayed.
3. Click Back-up.
4. Enter the path and name for the backed up configuration.
5. Click OK.
You may backup various combinations of configurations.
So, when I did press on Next button I got this message on portal:
java.lang.ClassNotFoundException: com.sap.xapps.cprxrpm.spmodel.RPMSPModel$Implementation -
Loader Info -
ClassLoader name: sap.com/xapps~cprxrpm~spmodels Parent loader name: References: common:service:http;service:servlet_jsp service:ejb
common:service:iiop;service:naming;service:p4;service:ts service:jmsconnector library:jsse library:servlet common:library:IAIKSecurity;library:activation;
library:mail;library:tcsecssl library:ejb20 library:j2eeca library:jms library:opensql common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;
library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;
service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;
service:userstore interface:resourcecontext_api interface:webservices interface:cross interface:ejbserialization
sap.com/tcwddispwda sap.com/tcwdcorecomp service:webdynpro service:sld library:tcddicddicservices library:com.sap.aii.proxy.framework library:
tcgraphicsigs library:com.sap.mw.jco library:com.sap.lcr.api.cimclient library:sapxmltoolkit library:com.sap.aii.util.rb
library:com.sap.util.monitor.jarm library:tcddicddicruntime library:com.sap.aii.util.xml library:com.sap.aii.util.misc library:tc~cmiResources:
/usr/sap/IPD/JC00/j2ee/cluster/server0/apps/sap.com/xappscprxrpmspmodels/src.zip /usr/sap/IPD/JC00/j2ee/cluster/server0/apps/sap.com/xappscprxrpmspmodels/webdynpro/public/lib/sap.comxappscprxrpm~spmodels.jar
Loading model: {parent,references,local} -
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
Version null
DOM version null
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0016.20080423163523.0000 (release=645_VAL_REL, buildtime=2008-06-10:08:13:52[UTC], changelist=483895, host=pwdfm101), build date: Thu Apr 23 23:17:07 MDT 2009
J2EE Engine 7.00 patchlevel 111772.44
Java VM Java HotSpot(TM) 64-Bit Server VM, version:1.4.2 1.4.2.13-070317-20:54-IA64W IA64W, vendor: Hewlett-Packard Company
Operating system HP-UX, version: B.11.23, architecture: IA64W
Session & Other
Session Locale es_EC
Time of Failure Tue May 26 14:56:46 MDT 2009 (Java Time: 1243371406148)
Web Dynpro Code Generation Infos
sap.com/pb
SapDictionaryGenerationCore 7.0016.20061002105236.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:46:51[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0016.20061002105236.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:46:58[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0016.20060719095755.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:33:13[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0016.20061002110128.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:52:20[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0016.20061002105432.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:33:58[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0016.20061002105432.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:33:53[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0016.20060719095619.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:44:50[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0016.20070703112649.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:49:18[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0016.20080423163523.0000 (release=645_VAL_REL, buildtime=2008-05-31:05:54:17[UTC], changelist=483895, host=pwdfm101)
SapWebDynproGenerationCore 7.0016.20061002110128.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:52:28[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0016.20080423163523.0000 (release=645_VAL_REL, buildtime=2008-05-31:05:54:17[UTC], changelist=483895, host=pwdfm101)
sap.com/tcwddispwda
No information available null
sap.com/pb_api
SapDictionaryGenerationCore 7.0016.20061002105236.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:46:51[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0016.20061002105236.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:46:58[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0016.20060719095755.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:33:13[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0016.20061002110128.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:52:20[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0016.20061002105432.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:33:58[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0016.20061002105432.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:33:53[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0016.20060719095619.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:44:50[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0016.20070703112649.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:49:18[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0016.20080423163523.0000 (release=645_VAL_REL, buildtime=2008-05-31:05:54:17[UTC], changelist=483895, host=pwdfm101)
SapWebDynproGenerationCore 7.0016.20061002110128.0000 (release=645_VAL_REL, buildtime=2008-06-09:17:52:28[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0016.20080423163523.0000 (release=645_VAL_REL, buildtime=2008-05-31:05:54:17[UTC], changelist=483895, host=pwdfm101)
sap.com/tcwdcorecomp
No information available null
.... NEXT thread......
I don`t know What's the problem ?
Any suggetion for this problem?
Thanks
Dannylog continius
Detailed Error Information
Detailed Exception Chain
java.lang.RuntimeException: com.sap.xapps.cprxrpm.tools.repositorybackup.api.ReplicationException: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to create repository model for 'com.sap.xapps.cprxrpm.model.RPMModel'.
at com.sap.xapps.cprxrpm.tools.controller.ConfigurationBackupCC.supplyBackupEntries(ConfigurationBackupCC.java:521)
at com.sap.xapps.cprxrpm.tools.controller.wdp.InternalConfigurationBackupCC.supplyBackupEntries(InternalConfigurationBackupCC.java:209)
at com.sap.xapps.cprxrpm.tools.controller.wdp.IPublicConfigurationBackupCC$IBackupEntriesNode.doSupplyElements(IPublicConfigurationBackupCC.java:411)
at com.sap.tc.webdynpro.progmodel.context.Node.supplyElements(Node.java:406)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementList(Node.java:345)
at com.sap.tc.webdynpro.progmodel.context.Node.createMappedElementList(Node.java:498)
at com.sap.tc.webdynpro.progmodel.context.Node.supplyElements(Node.java:393)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementList(Node.java:345)
at com.sap.tc.webdynpro.progmodel.context.Node.getElements(Node.java:333)
at com.sap.tc.webdynpro.progmodel.context.Node.size(Node.java:721)
at com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter$Rows._initialize(TableAdapter.java:8744)
at com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter.setViewAndNodeElement(TableAdapter.java:373)
at com.sap.tc.webdynpro.clientserver.uielements.adaptmgr.URAdapterManager.getAdapterFor(URAdapterManager.java:285)
at com.sap.tc.webdynpro.clientserver.uielements.adaptmgr.URAdapterManager.getAdapterFor(URAdapterManager.java:93)
at com.sap.tc.webdynpro.clientserver.uielements.adaptbase.AbstractAdapter.getAdapterFor(AbstractAdapter.java:495)
at com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GridLayoutAdapter$Cells.getContent(GridLayoutAdapter.java:644)
at com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutCellFragment(GridLayoutRenderer.java:826)
at com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutRowFragment(GridLayoutRenderer.java:424)
at com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutFragment(GridLayoutRenderer.java:336)
at com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.render(GridLayoutRenderer.java:79)
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.renderScrollContainerFragment(ScrollContainerRenderer.java:619)
at com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.render(ScrollContainerRenderer.java:74)
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.UiWindowRenderer.render(UiWindowRenderer.java:52)
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendHtml(HtmlClient.java:1056)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.fillDynamicTemplateContext(HtmlClient.java:456)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse(HtmlClient.java:1240)
at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.retrieveData(HtmlClient.java:252)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doRetrieveData(WindowPhaseModel.java:595)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:156)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1299)
at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:326)
at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:868)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.xapps.cprxrpm.tools.repositorybackup.api.ReplicationException: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to create repository model for 'com.sap.xapps.cprxrpm.model.RPMModel'.
at com.sap.xapps.cprxrpm.tools.repositorybackup.replication.ReplicationEngine.getModelInstances(ReplicationEngine.java:135)
at com.sap.xapps.cprxrpm.tools.controller.ConfigurationBackupCC.supplyBackupEntries(ConfigurationBackupCC.java:484)
... 75 more
Caused by: com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to create repository model for 'com.sap.xapps.cprxrpm.model.RPMModel'.
at com.sap.tc.webdynpro.repository.model.Repository.getRepositoryModelInternal(Repository.java:503)
at com.sap.tc.webdynpro.repository.model.Repository.getRepositoryModel(Repository.java:474)
at com.sap.xapps.cprxrpm.tools.repositorybackup.replication.ReplicationEngine.getModelInstances(ReplicationEngine.java:105)
... 76 more
Caused by: java.lang.ClassNotFoundException: com.sap.xapps.cprxrpm.model.RPMModel$Implementation
Found in negative cache
Loader Info -
ClassLoader name: [sap.com/xappscprxrpmmodels]
Parent loader name: [Frame ClassLoader]
References:
common:service:http;service:servlet_jsp
service:ejb
common:service:iiop;service:naming;service:p4;service:ts
service:jmsconnector
library:jsse
library:servlet
common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
library:ejb20
library:j2eeca
library:jms
library:opensql
common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore
interface:resourcecontext_api
interface:webservices
interface:cross
interface:ejbserialization
sap.com/tcwddispwda
sap.com/tcwdcorecomp
service:webdynpro
service:sld
library:tcddicddicservices
library:com.sap.aii.proxy.framework
library:tcgraphicsigs
library:com.sap.mw.jco
library:com.sap.lcr.api.cimclient
library:sapxmltoolkit
library:com.sap.aii.util.rb
library:com.sap.util.monitor.jarm
library:tcddicddicruntime
library:com.sap.aii.util.xml
library:com.sap.aii.util.misc
library:tc~cmi
Resources:
/usr/sap/IPD/JC00/j2ee/cluster/server0/apps/sap.com/xappscprxrpmmodels/webdynpro/public/lib/sap.comxappscprxrpm~models.jar
/usr/sap/IPD/JC00/j2ee/cluster/server0/apps/sap.com/xappscprxrpmmodels/src.zip
Loading model: {parent,references,local}
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:360)
at com.sap.tc.webdynpro.repository.model.Repository.getRepositoryModelInternal(Repository.java:496)
... 78 more -
Start Of Ramp-Up for SAP Portfolio and Project Management 5.0
Start Of Ramp-Up for SAP Portfolio and Project Management 5.0
Starting with this new release, the application SAP Portfolio and Project Management 5.0
replaces both the SAP Resource and Portfolio Management (SAP RPM) application and the
Collaboration Projects (cProjects) application.
Start of ramp-up for SAP Portfolio and Project Management is 19th of April, 2010. The end
of ramp-up is currently scheduled for 19th of October, 2010.
Functional Innovations And New Features
A detailed description of all new and/or enhanced functional innovations and features can
be found in the Release Notes:
[http://service.sap.com/releasenotes |http://service.sap.com/releasenotes]
-> SAP Solutions
-> Release Notes SAP Portfolio and Project Management
There are some SAP Notes which are in general very important for SAP Portfolio and Project
Management 5.0 and which also serve as central points of entry to find import information:
SAP Note [1377104|https://service.sap.com/sap/support/notes/1377104] FAQs - SAP Portfolio and Project Management 5.0
SAP Note [1402912|https://service.sap.com/sap/support/notes/1402912] PPM 5.0: Supported Browsers, Java versions, etc.
SAP Note [1411953|https://service.sap.com/sap/support/notes/1411953] PPM 5.0: Configuration Content
SAP Note [1436778|https://service.sap.com/sap/support/notes/1436778] SAP Portfolio and Project Management 5.0: Restrictions
Kind regards,
FlorianThanks very much for taking the time to post the info Florian. I will update this thread as well if I run into any new information.
Do we have any idea on SAP's direction for Product Definition? PD is still version 2.0 and I heard that PD functionality will be incorporated into PPM 5.0 which does make a lot of sense. I very briefly went through the notes and config doc in this post and did not get the impression that PPM has any idea and concept management capabilities. -
Using Datasources.xml in backup of Hyper-V cluster and standalone Hyper-V hosts
Hi!
I have a DPM 2012 server which I have used to backup standalone Hyper-V hosts and Exchange 2010 server active DAG node. Since yesterday I have added Hyper-V cluster backup, and now I have generated Datasources.xml using .\DSConfig.ps1 on one of the
Hyper-V nodes.
My question is: Do I have to manually add other protected data sources (Exchange, VMs from standalone hosts) to Datasources.xml? Or this xml is used only for CSV clusters?
Thanks in advance for your answers!
KrunoHi,
Yes, but the key is wrong - this is required as part of the csv serialization configuration.
On the DPM Server, Copy / paste below into notepad, then save as MaxAllowedParallelBackups.reg on the DPM server, then right-click and select merge.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\2.0\Configuration\MaxAllowedParallelBackups]
"Microsoft Hyper-V"=dword:00000001
Please review these two sources to assist you.
http://social.technet.microsoft.com/wiki/contents/articles/17493.protecting-hyper-v-virtual-machines-with-system-center-dpm-2012.aspx
http://blogs.technet.com/b/dpm/archive/2010/12/09/system-center-data-protection-manager-2010-hyper-v-protection-configuring-cluster-networks-for-csv-redirected-access.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
Oracle 9i RMAN backup filling up all disk and failing at the very end
Hello to all and thank you in advance for any input from any of you.
I am new in oracle and the only one in my company with a little bit of oracle knowledge, which is not a whole lot.
I inherited a few servers (Linux and Windows based). We mostly run all our production environment on a Linux box hosting oracle 10g release 10.2.0.1 but we had a legacy application server that still runs on 9i release 9.2.0.1.0. This server is a windows 2003 box, the previous DBA or someone else with admin rights to this machine compressed the whole drive where oracle resides, when I started summarying the oracle assets, I saw this server with no backups scheduled and a compressed disk with very limited space after this compression, only 13 GB left, the database if uncompressed would definitively filled up all the disk. The machine is in used and cannot be taken down for more than a couple of hours. We tried adding another disk but the machine only accept it as a hot spare. The database is in archive mode, when I tried to run a RMAN backup, it start filling up the database drive until it's empty and it crashes the whole machine, it seems like the buffer is growing and growing until it fills up the whole drive. The only way to get the server up and running again is to reboot the machine since the server is more than 6 years old we are not please with this action because we are afraid the machine would go south in one of those reboots.
Has anyone heard of similar issues when running RMAN on a compressed drive? Can the compressed disk have any involvement in this kind of odd behaviour? I tried running the backup in debug mode and creating a log in a different disk (the one where the backup is going to) and still the same issue. Again any help is much appreciate,
Sincerely,
AlexSybrand,
Thank you for your fast response, I am going to use your previous post to answer one by one your question,
1 The Oracle binaries --- on a compressed drive > Yes
2 The Oracle database control files redo log files and datafiles on that same compressed drive? > Yes
3 The archived redo log ditto? > Yes
I know for a fact (as I have been using that in 9i) you can create a RMAN backup on a compressed drive, and you can have your archived redo go to a compressed drive. No problemo! > Excellent good news!!!
But I would never touch the data files. Please note backup sets are multiplexed files consisting of multiple datafiles, so RMAN would need to do some calculations to decompress several blocks at the same time and to calculate a new block and compress it.
Do you have enough space to:
a) (preferred) to make datafile copies instead of a backup >
Not in the drive that hosts the oracle instance but yes on an external usb drive (1TB) I attached to use as a backup repository, maybe this is why I am having these issues. I only have 13 GB left on that drive where the oracle instance resides (actually as I explained in a previous reply to Mark, the server only has 3 slots for disks, two of them as configured as RAID 1 and the other is a hot spare because the RAID configuration manager cannot can only added as hot-spare. The raided disk are partitioned in two, one small partition is for the OS and the other is for the oracle instance). When you said make a copy of the datafiles, I assumed you are talking about doing manual backups, and copying the database after using using "alter tablespace tablespace_name begin backup; then copy the file; alter tablespace tablespace_name end backup;
b) use filesperset=1 on the backup command line, so the multiplexing (and associated calculations) stop. I have not tried the option of fileperset yet but I can tryi it and see if that helps.
Can you post the last few lines of the RMAN log where RMAN bombs out? Note: the last few lines. Not all of it, or you must send some paracetamol in conjunction! >
When I ran the debug option, I stopped the backup at less than 20% because I didn't want to reboot the system in the middle of the production time, the backup consumed at least 3 GB during the time was running. The times I ran the RMAN backup I didn't used the debug option so I don't have a log long enough to send unless you want the last few lines of what I have.
Thanks again for your input,
Sincerely,
Alex -
ACE-20 Module: automated backup of configuration
Hi All,
I am currently stuck to setup an automated configuration backup for my ACE Blades.
I found a script to backup the ACE from the Cisco ANM box but unfortunately I am not very familiar with Linux.
Has someone a hint or already an automated solution (script) in place, to "pull" the ACE config from a Microsoft system ?
System State:
ACE IOS A2.(1).5
Thanks in advanced for your reply
Saluti
AlessandroHello Alessandro,
If you upgrade to the latest ACE software, which is A2(3.0), you can take advantage of the new backup and restore feature. With this, the ACE will backup all of the following and add it to a .tgz file:
Running-configuration files
Startup-configuration files
Checkpoints
SSL certificates
SSL keys
Health-monitoring scripts
Licenses
You could use an Expect script to periodically log into the ACE, create the backup, and copy it off the ACE. The backup and restore feature is documented here:
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_0/configuration/administration/guide/managesw.html#wp1244360
Another option for you would be to use the Application Networking Manager (ANM). It is a graphical user interface for ACE configuration, management, and monitoring. It also allows you to perform backups (and restores).
ANM - Performing Device Backup and Restore Functions
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/application_networking_manager/3.0/user/guide/UG_virtual_contexts.html#wpxref82223
Hope this helps,
Sean -
Backup aborted - Configuration Backup Failes
Over the past couple of days, I've started getting the Error "Backup aborted - Configuration backup failed" on 3560/2960 switches and 2900/2800 routers. Pretty much everything at my primary site and a few devices, but not all, at some of my clients. What's odd to me is that the devices with the backup failures now have a greyed out "Backup Now" button. Again that doesn't apply to all, but most devices.
Shawn Eftink
CCNA/CCDA
Please rate all helpful posts and mark correct answers to assist others searching for solutions in the community.Hi Shawn,
We saw this same behavior this morning with a test ON100 in the lab. The ON100 may need to run through it's normal scheduled nightly maintenance window before the driver tries the backup and then subseqeuntly enables the Backup Now button within the portal. Please take a look at this customer again on Monday and let us know if the backup succeeded, and if the Backup Now button becomes available again. We are looking into what it will take to issue a fix, as a contingency plan, or until a fix can be deployed, we are looking into controlled periodic monthly reboots of all ON100 which might mitigate issue by clearing the /tmp ramdisk on the devices.
-mike -
Replicating Configuration of Service and Content Sections
I have 2 CSS11050 in a Active/Backup scenario useing Redundant-VIP and Virtual Routers. I want to have a script of something replicate the Service and owner section of the config form the ACtive Switch to the backup without effecting the VLAN or int sections. I tried teh Script that come in the OS but it want the redundant protocol loaded.
Anyone have a solution or idea on how to handle this?I would suggest looking at this link which deals with configuration of redundancy on the CSS as well as the two types of configuration synchronizations (complete and partial) and redundant protocols.
http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/css_500/advcfggd/redndncy.htm#xtocid4 -
Saved State Backup on Server 2012 R2 and DPM 2012
Hello, Our environment in currently in transition with planned migration to 2012 R2. In the mean time, we have a 5 node 2008 R2 hyper-v cluster with CSV. We are currently using DPM 2012 for our backup. I have read multiple postings about child
partition backup and saved state and all that seems to make relative sense.
What I have noticed is that in our existing environment (2008 R2 Hyper-v, DPM 2012) that all 2012 R2 Virtual servers setup in our hyper-v cluster show 'Backup Using Saved State'. All virtual 2003 - 2008 R2 servers on the same cluster show as 'Backup
using Child Partition Snapshot'.
So, the question: is this normal and the only way virtual 2012 R2 servers can be backed up in our environment? Or, is there some configuration on the virtual 2012 R2 servers that needs to be done so that the Hyper-v VSS writers show that it can be backed
up using Child Partition Snapshot. (Yes, I viewed the Hyper-V VSS Writer Caption: for each system on all the nodes and no, I am not talking about what is displayed in DPM 2012 since I understand it may not truly reflect the current backup method)Have you already checked typical reason for DPM doing saved state backup? If not, find them below.
Also, do your VM have
SCSI controller added? Prior to using Veeam as our primary backup solution, we leveraged DPM and confronted the very same issue. Fortunately, by adding ISCSI controllers to VMs in question we were able to solve the problem.
Conditions when DPM fails to back up Hyper-V virtual machines in an online state
By default, System Center 2012 – Data Protection Manager (DPM) performs a backup of a Hyper-V Virtual Machine (VM) in an online state. However, DPM cannot back up a Hyper-V VM in an online state, if one or more of the following
conditions are true:
Backup (Volume Snapshot) Integration Service is disabled or not installed.
The virtual machine has one or more dynamic disks.
The virtual machine has one or more non-NTFS based volumes.
The virtual machine Cluster Resource Group in a cluster setup is offline.
The virtual machine is not in a running state.
A ShadowStorage assignment of a volume inside the virtual machine is explicitly set to a different volume other than itself.
An App-V drive is installed on the virtual machine that creates a non-NTFS volume.
These conditions are set by the Hyper-V writer. In such a case, the VM is put in a saved state before a snapshot of host volumes are taken (except when the VM is turned off) for a backup. The Hyper-V writer adds the VM in the following format:
For offline backups: Backup Using Saved State\<VMName>
For online backups: Backup Using Child Partition Snapshot\<VMName>
Additional reason if we have less than 300MB free space on a volume in the guest.
Kind regards, Leonardo. -
ACS Incremental backup not configured
Hi All,
I have upgraded to ACS 5.5 patch 6, but having strange issues.
Though the incremental backup is configured, it is sending an alert as "Incremental backup is not configured. Configuring incremental backup is necessary to make the database purge successful. This will help to avoid disk space issues. View database Size is 13.68GB and size it occupies on the harddisk is 13.65GB."
I checked under the purge and incremental history, it has done the incremental backup.
I received another alert "Configure Remote Repository under Purge Configuration which is used to take a backup of data before purge" and check it is accessible from CLI #show repository xxxxx.
Has anyone gotten these issues before??
I have configured all these on Primary.
ThanksWarning Alarm to wait 90 min between incremental backup and Purge time
CSCtx20928
Description
From the ACS 5.x user guides , it is documented that If you enable incremental backup, data is purged daily at 4:00 a.m. at the local time zone where the ACS instance that runs the View process is located.
However, you cannot concurrently run an incremental backup, full backup, and data purge. If any of these jobs are running, you must wait for a period of 90 minutes before you can begin the next job.
If the Incremental Backup schedule is configured within the 90 minutes of Data Purge time, there is no warning thrown on the GUI against this config.In this case, we get Warning Alarms which don't indicate the right status to have wait period of 90 minutes before you can begin the next job.
The Warning Alarms which are shown are incorrect like:
Incremental Backup Not Configured: Incremental backup is not configured. Configuring incremental backup is necessary to make the database purge successful. This will help to avoid disk space issues. View database Size is 0.23GB and size it occupies on the harddisk is 0.23GB.
Purge Configuration Repository not configured: Configure Remote Repository under Purge Configuration which is used to take a backup of data before purge.
Workaround:
As data is purged daily at 4:00 a.m. at the local time zone where the ACS instance that runs the View process is located,configure Incremental Backup schedule at 90 min time gap between Data Purge time. -
How to configure a shell and tube heat exchanger with Lab VIew to get data
HiI
In our undergraduate chemical engineering labboratory we want to configure our shell and tube heat exchanger with a DAq and Lab VIEW to get information about the temperaure (of the cold fluid stream being heated), the pressure (of the steam on the shell side of the heat exchanger) and the flowrate (of the water being heated).
Can anyone suggest thermocouples, pressure transducers and flowmeters to fit between the heat exchanger and the DAq?
P.S. the heat exchanger is already fitted with thermometers, a pressure gauge and a rotameter but we don't know how to connect these hardware to the DAq
Solved!
Go to Solution.It sounds like you have enough information to pick out appropriate sensors, you just need to do the research. I would start looking through the Omega catalog, or give them a call - they're usually helpful. I can't take the time to spec out parts for you - that would be a lot of time spent on someone else's project. Most pressure sensors put out either a 4-20mA or 0-5V signal, either of which you can read through an analog input on a DAQ; measuring a 4-20mA signal requires a resistor to convert to voltage. Most of the NI DAQ boards can read a thermocouple on an analog input, but make sure that your hardware does support reading thermocouples. For accurate readings, use a device that has built-in cold junction compensation - for example, the SCB-68 connector block - and for the most accurate readings, get a board specifically designed for temperature measurement.
For the flow measurement, a standard, simple solution is an orifice plate. You put a differential pressure transducer across it, look up the appropriate equations, and use them to calculate the flow rate given the density of the fluid (which you'll be able to calculate from the pressure and temperature, since steam tables are widely available). There are other differential pressure devices available as well - at a previous job we used a V-Cone from McCrometer. If you call them they'll spec one for you - but get an approximate cost first to make sure it's within your budget. -
I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate
I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots. -
I have deleted hundreds of pictures, I've deleted apps, deleted emails and texts, and I've turned off and deleted backups of apps on icloud and it is still telling me that there is not enough icloud storage available for my phone to be backed up. I am supposed to do this before I go to the Apple store today to get my phone fixed. Can someone please help me? I have done almost everything.
This article explains ways to reduce your iCloud storage: Managing your iCloud storage. In addition to what's mentioned in the article, if you have lots of photos and videos attached to your text messages, these are all included in your iCloud backup and deleting them can sometimes significantly reduce the size of your backup.
If worse comes to worse, back up your phone to your computer rather than iCloud. To do this, connect it to your computer, open iTunes and go to File>Devices>Back Up and to File>Devices>Transfer Purchases. This can be used to restore your data when you get your phone back. (In fact, it's faster because you don't have to download the data from iCloud.)
Maybe you are looking for
-
Problem with Alt Text output from thumbnail image of Lightbox widget
I'm having a problem with the Lightbox widget not producing alternative text based on the image properties. I've set ALT text for the image properties on both the larger Ligtbox image as well as the thumbnail. But the HTML output from Muse does not
-
BYPASS_BUFFER parameter of HR_READ_INFOTYPE FM
Hi all you ABAP experts! I need to understand what exactly does the BYPASS_BUFFER of the HR_READ_INFOTYPE do? Could any of you please explain me if possible with an example what is intended for? Many thanks in advance.
-
I want to see the LDAP set up for EP 6.0 sp2
Hi, I want to see the LDAP set up for EP 6.0 sp2. And also the see the entries under portal and corporate LDAP. Kindly let me know at the earliest. Swetha
-
FLEX to send SWIFT messages to banks
Anyone here used FLEX to send SWIFT messages to banks? is this a bad idea?
-
Access to whole payload in user defined function
Hi, is there a way to access the whole XML payload in a user defined function or is it necessary to employ a Java mapping? Kind regards, Heiko