Backwards compatibility between DWCS3 and DW8

I am purchasing the CS3 Web premium and plan to only install
in on the new desktop I will purchase. Most of my design work will
be done on that system but I will occasionally need to work on
files when traveling on my laptop which will only have DW8 (not
upgrading that system just yet). Will there be any compatibility
issues in working on the same file between both versions, or am I
stuck only working on the desktop?
Dara

I don't see any problem with compatibility if they are static
pages and you
haven't used any of the newer features from CS3 like Spry for
example.
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
"Dara_BSI" <[email protected]> wrote in
message
news:f3o93g$ert$[email protected]..
>I am purchasing the CS3 Web premium and plan to only
install in on the new
> desktop I will purchase. Most of my design work will be
done on that
> system but
> I will occasionally need to work on files when traveling
on my laptop
> which
> will only have DW8 (not upgrading that system just yet).
Will there be any
> compatibility issues in working on the same file between
both versions, or
> am I
> stuck only working on the desktop?
>
> Dara
>

Similar Messages

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

Compatibility between CS3 and earlier versions?

As the web developer I have Contribute version 3, but some of
my new clients
will be buying the latest Contribute CS3 to update their site
pages. Can I
still set up their roles and editing rights for a site and
create a
connection key to send to them that will work for them in
Contribute CS3
without difficulty? And can either of us still edit the site
pages,
regardless of the fact that we are each using different
versions of
Contribute?
In conclusion, are there any backward compatibility issues I
should be aware
of between the newer version and older versions of CS3 when
administering,
and connecting to, the same website?
Thanks in advance.
(Please reply to forum. E-mail address is bogus to prevent
spam)

Thanks for the advice.
"ThinkInk" <[email protected]> wrote in
message
news:f0sa43$dvh$[email protected]..
>I had the same problem when C4 arrived and I could'nt
purchase C3 for my
> clients.
>
> The key is to use Transitional Mode (adminstrator
settings,
> compatibility),
> here's wat the HELP says:
>
> --------------------------
> Enabling compatibility with older versions of Contribute
> Contribute 4 offers administrators two compatibility
options--one that
> allows
> users with earlier versions to work on the website, and
one that does not:
>
> Transition Mode
> In this mode, users of earlier versions of Contribute
can continue working
> on
> the website, along with Contribute 4 users. This lets
you evaluate the new
> version and set up new roles and permissions without
disrupting users with
> earlier versions of Contribute.
>
> Compatibility Mode
> In this mode, all users must use Contribute 4. Users
with earlier versions
> cannot work on the website.
>
> Contribute 4 starts in Transition mode by default when
you migrate from
> Contribute 3. Use this mode temporarily; when you?re
ready, transition all
> users to Contribute 4 and enable Compatibility Mode.
>
> To enable Compatibility Mode:
> In Contribute 4, select Edit > Administer Websites,
and then select a
> website.
> The Administer Website dialog box appears.
>
> Select Compatibility from the category list on the left.
> The Compatibility options appear in the Administer
Website dialog box.
>
> Select Compatibility, and then click Close.
> After you enable Compatibility Mode, all users connected
to the website
> must
> use Contribute 4.
>
> ------------------------
>
> It's really better to upgrade yourself to the newest
version, so you know
> what
> extra options your clients have and you can support
them. I managed to get
> both
> C3 en C4(I purchased the upgrade) running on my PC, so
maybe that's also
> an
> option.
>
> grtz. Hayo
>

Battery compatibility between X31s and X61s

Hi!
I own a X31s and X61s, and would like have a spare battery handy for travel. Before placing the order, I am wondering if the following battery can be used on both:
* ThinkPad X60s Series 4 Cell Slim Line Battery
It is not cheap, so I would like to think twice before buying. Somehow I cannot find any information on the compatibility issue. Thank you for your help!
Jenny

jennyumaa, welcome to the forum,
unfortunately the batteries are definitely not interchangeable between X31 and X61 systems.
Sorry
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Compatability between LaCie and other drives

Greetings Kind MacAddicts!
I have a 160GB LaCie (Triple Threat?) FW800 external drive and have had no problems. Now I want to expand and daisychain another external drive. Thinking of a Maxtor with FW800 (more bang for the buck) and wondering if there are any known compatability issues between LaCie and Maxtor, or btw Maxtor and the new Intel processors. Suggestions?

Well that drive inside the LaCie casing could very well be a Maxtor drive too :P
Remember LaCie don't actually make Hard Drives, they just put drives from other manufacturers in their external casings and charge a premium.
Yes, some of their designs look nice

Compatibility between Yosemite and Photoshop / Bridge CS5.

I am concerned about the possibility of incompatibility between Yosemite and Photoshop / Bridge CS5 so have delayed updating my Mac. Has anyone updated, experienced problems and found solutions? What does Adobe have to say in this regard?

I'm not sure I know enough to answer the question.
The images are on my G5 on a second internal hard drive (not the boot drive).
They are in a folder with a lot of images from the same shoot.
That folder shows up in the Library in Aperture, also. I think I imported them. But, as best I can tell, they do not "only exist in Aperture" because I can see them, and their .xmp files in the original file on the second internal hard drive.
Thank you so much for trying to help.
sjh

Issue with VPN compatibility between 2811 and 2911

hello
I would like to ask anyone have had any issues with setting up a VPN tunnel between 2811 and 2911?
The IPSec VPN is established but for some reason I cannot ping the LAN side to the other LAN side of the other end of the VPN Router?
Any experience would be much appreciated
Thanks

IPSec VPN can be with no problem set up between any cisco routers (and not nesesserely cisco), so there are should be no issues in your case.
If you say that tunnel is established successfully, then problem most probably related to routing issues between sites or incorrect crypto-acl configured. Check if hosts on both sites have correct routing information on how to get to subnets on the other site.
To make more accurate assumptions it would help if you provide config on both sites and describe your topology.

USB Flash Drive Compatibility between Mac and PC?

Hi,
I own an iMac 2 GHz Intel Core 2 Duo 1 GB 667 MHz DDR2 SDRAM and just got a new job where I'm using a PC. At work they all use flash drives to transfer data back and forth to computers etc. Would a flash drive (let's say a Kensington since that's the brand I've seen the most at work) that works in a PC at work be compatible with my iMac at home. I know Kensington makes them compatible for Mac and PC but just wondering how the data would transfer onto my Mac. Is it readable, does it depend what I'm transferring over?
Message was edited by: spiralgirl

{quote} guy there said they haven't yet perfected the flash drives to switch between Mac and PC and work well so I was a little surprised at this. {quote}
That is pretty much a standard reply you get from someone that doesn't know anything about macs. I've used those things for years without any problems, but I have been using my ipod as a disk lately because I always have it with me. It's also another less thing I have to buy and carry around.

Compatibility between CF7 and CF10

Hi
We currently have two load-balanced servers running CF7 Enterprise Edition. The applications use the Client Variable store, so that we can move users between servers as necessary (should one become busy / unavailable).
We now want to add a third server into the cluster. This will have to be CF10 Enterprise Edition.
Does anyone know if the Client Variable store operates in the same way, or am I likely to have problems if I try and add this to the cluster? Also, can anyone point me in the direction of looking at which CF tags (or tag attributes) have been deprecated between 7 and 10?
Thanks
Karl

I don't think you will find a list of differences between CF 7 and CF 10 from Adobe. Maybe someone out there has compiled a list???? More likely you will need to read the release notes from each version and determine that way.
ColdFusion release notes - http://www.adobe.com/support/documentation/en/coldfusion/releasenotes.html

Nican backwards compatibility between nican versions 2.1.3 and 2.6

Hello folks,
I have inherited a VC++ application that uses nican. It was apparently compiled using nican version 2.1.3 (assumed to be true because the VC++ program works with nican 2.1.3). We recently installed LabVIEW 8.6 (including nican 2.6) and the VC++ program no longer worked. After uninstalling nican 2.6 and reinstalling 2.1.3 the program works again. This is fine except that for new development, we would like to use the nican 2.6 (the latest we presume?)
This raises a couple of questions:
1. Is nican 2.6 expected to be backwards compatible with 2.1.3?
2. If the answer to the question above is "yes", then can anyone offer any suggestions on why the VC++ program would no longer work when nican 2.6 was installed?
3. If nican 2.6 is not backwards compatible with nican 2.1.3, where can I find the necessary documentation (e.g. well documented .h files etc) to begin trying to decipher what is and isn't compatible so I can make the necessary changes?
Any help is greatly appreciated.
Best Regards,
Chris

Hello B2k,
Thanks for the information. I wasn't too sure where to start, so I don't have any more information yet. The application does not report any errors, it just doesn't "do" anything. For example, when I connect to the UUT using the VC++ application, the first thing I would normally do is read the EEPROM (over CAN), but this doesn't work with NICAN 2.6 installed.
It looks like NI-Spy may very well help me determine where (i.e. what calls) are failing, thanks.
1. Do you know where NICAN 2.6 puts nican.dll and nican.h?
2. You explicitly stated that NICAN 2.6 should be backwards compatible with 2.1.3, but IF something has changed in the interface (e.g. a function signature etc.) do I need to search the nican.h files to try to find the difference, or do you know of another document that lays them out more clearly? (I found several documents/revisions on the NI website (e.g. "NICAN Programmer Reference Manual" and "NICAN Hardware and Software Manual and Specifications"), but I don't have any idea which document/revision goes with which version of NICAN?
Thanks for your time and the helpful information!
Chris

File compatibility between cs3 and cs5

Hi,
What are the compatilibity issues between Photoshop CS3 and CS5? Can they be used together without much (if any) issues?
Thanks.

They can happily coexist on the same system, as long as you've got the disk space. Photoshop has always been like that.
You'll only be able to run one at a time, at any given instant, though.
Regarding file compatibility, I don't how much it's required to open a file in Photoshop CS3, but the newer version does offer a "Maximize Compatibility" preference setting for saving .psd files. On occasion I've opened .psd files in Photoshop CS3 saved by CS5 (using the aforementioned setting) and I haven't seen any issues at all.
-Noel

Compatibility between 1131AG and 1420

Are there compatibility issues between a AIR-AP1131AG-A-K9 and 1420 series Lwapp, with b/g and a dipole antennas? I've read they are incompatible. Is there any documentation on the Cisco site that addresses this?

If you are talking about using the external antenna of the 1420 for the 1131, there sure is. The 1130 series AP has INTERNAL antenna.

Compatability between cloud and non-cloud versions

I'm pretty sure there will be no compatability problems between the same versions of cloud and non-cloud products. But what about the feature updates that are mentioned as a benefit of the cloud products. How do they effect the file format. Does it depend on whether or not I use a certain feature? Will these updates only provide features that don't change the file format? For example: If I have version 6.0 of non-cloud InDesign on one computer and 6.? of cloud InDesign with some new feature that hasn't made it into the non-cloud release yet, can I save a file with the cloud version and open it with the non-cloud version?

Hi ,
We really apologize for all the inconvenience which has caused you.
Yes you can open the files from recent version into 1 or in some cases 2 versions back by following the different workflows for each program
For example in In Design you can save the file as IDML and open in the previous version.
In the meanwhile if these steps doesnt resolve your issues you can contact Adobe support by following the link below:
http://helpx.adobe.com/contact/
Thanks
Mandhir

Compatibility between PSE8 and bridge CS4 with mac OS 10.7.5

good morning
I work actually with mac OS10.7.5 and i use everyday PSE8 with a classification in adobe bridge CS4
I would like to change my mac OS for at least 10.8 or mavericks or even with yosemite which is coming soon
can you tell me if there is compatibility with mY bridge CS4 and PSE8
I don't afraid to change for a new PSE like the 12 because i dob't want to use the organizer all my tags and classification is with bridge and i don't want to do a new classification, too much photos!
can you help me ?
thank you for your responses
have a good day
pierre becdelievre
i'm sorry if I'm not in the good space but it's very difficult to find it!

You can't connect the two devices via bluetooth, here are the supported profiles http://support.apple.com/kb/ht3647
you can connect your phone to the mac for tethering http://support.apple.com/kb/HT4517
what are you trying to do?

Need help with XML Compatibility between CS3 and CS4

I'm not a Dreamweaver guru but I am hoping someone will recognize my issue and be able to provide meaningful feedback.
Background:
A developer buddy and I are working together to create a new home page for an online retailer that utilizes flash banners. We're using XML to update the content of the banners. My buddy is creating the XML file and sending it to me to populate with content (i.e. descriptions, images, image paths, etc.). He is creating the XML file in CS3 and I am editing in CS4. Here's the issue: Whenever he uploads the populated XML file to the server the banners are displayed correctly. If I take the same file and upload it without editing, it works great. However, if I open the file, edit and resave before uploading to the web server, the the banners all have extra spaces between each line of content - almost as if it were double spaced. If you look at the code, the code looks fine. In fact, the code looks exactly like it did when my buddy sent the file to me. I believe we have isolated the problem to something weird with my installation of DW. I have downloaded and installed any and all updates. Oh yeah he's using a MAC version and I am using the PC version of DW.
Has anyone seen anything like this before???
Help...

Thank you for your response.
The code is listed below and to tell you the truth the following code is both good and bad. As I mentioned before, if my buddy sends me this xml file and I upload it to the server, it works fine. If I open the file and immediately save it without making any changes then upload it, I experience the previously described promblem. It's very strange. The code in both files is identical.
To get a clearer picture of what I am describing, go to http://www.everythingministry.com/beta3.htm. The book descriptions appear correctly under the "New and Recommended" tab. However, whenever I edit any one of the six xml files that control the content for each of these tabs it ends up looking like what you currently see under the "New Music" tab. I have actually tried to update from 2 different machines running DW CS4.
Below are the xml files for the two tabs I referenced in the paragraph above:
ts_new.xml
<items>
<config
Milliseconds="5000"
Distance="3"
BorderColor="0xffffff"
TargetLink="_top"
TextYPosition="200"
MaxDisplayContent="6"
ContentWidth="148"
ContentHeight="300"
TransitionSpeed="0.8"
TransitionType="0"
ShowMouseOver="0"
ShowBorder="1"
ShowGlass="1"
/>
   <content>
    <image>images/crazylove.jpg</image>
    <description><![CDATA[Crazy Love
by Chan Francis
Price: $11.99
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/crazylove.aspx</link>
</content>
<content>
    <image>images/underthesheets.jpg</image>
    <description><![CDATA[Under the Sheets
by Dr. Kevin Leman
Price: $9.99
You Save: 29 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/underthesheetsthesecretstohotsexinyourmarriage.aspx</link>
</content>
<content>
    <image>images/outliveyourlife.jpg</image>
    <description><![CDATA[Outlive Your Life
by Max Lucado
Price: $19.99
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/outliveyourlifebymaxlucadohardcover.aspx</link>
</content>
<content>
    <image>images/lovedare.jpg</image>
    <description><![CDATA[Love Dare Day By Day
Wedding Edition
Price: $16.79
You Save: 27 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/lovedaredaybyday-weddingedition.aspx</link>
</content>
     <content>
    <image>images/lifeinterrupted.jpg</image>
    <description><![CDATA[Life Interrupted
by Priscilla Shirer
Price: $11.99
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/lifeinterruptednavigatingtheunexpected.aspx</link>
</content>
<content>
    <image>images/faithfulfasting.jpg</image>
    <description><![CDATA[Faithful Fasting
by Errica L. Williams
Price: $8.79
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/faithfulfasting.aspx</link>
</content>
<content>
    <image>images/whencouples.jpg</image>
    <description><![CDATA[When Couples Walk Together
Price: $9.59
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/whencoupleswalktogetherjan2011-paperback.aspx</link>
</content>
</items>
ts_music.xml
<items>
<config
Milliseconds="5000"
Distance="3"
BorderColor="0xffffff"
TargetLink="_top"
TextYPosition="200"
MaxDisplayContent="6"
ContentWidth="148"
ContentHeight="300"
TransitionSpeed="0.8"
TransitionType="0"
ShowMouseOver="0"
ShowBorder="1"
ShowGlass="1"
/>
   <content>
    <image>images/untilthewholeworldhearscd.jpg</image>
    <description><![CDATA[Until the Whole
World Hears
Price: $12.76
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/untilthewholeworldhearscd.aspx</link>
</content>
<content>
    <image>images/move.jpg</image>
    <description><![CDATA[Move
by Thirda Day
Price: $11.19
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/move.aspx</link>
</content>
<content>
    <image>images/andifourgodisforus.jpg</image>
    <description><![CDATA[And If Our God
Is For Us
Price: $11.19
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
    <link>http://www.everythingministry.com/andifourgodisforuscd.aspx</link>
</content>
</items>

Backwards compatibility between DWCS3 and DW8

Similar Messages

Maybe you are looking for