Bad audio connection on P-35 Platinum moBo, while capturing analog video?

Before I give up, I'm reaching out to MSI and any persons suffering from out-of-sync audio and video capture issues while using Pinnacle Studio Video editing software. Studio Ultimate HD v.14.
I've posted numerous inquiries to the Pinnacle Support team, the Pinnacle Forum site, as well as the GrassValley (Canopus 110 or 300, I was thinking about trying that) and really never got anywhere.
A few people had mentioned maybe the sync issue could be caused by a bad analog signal and it will drop video or audio frames hence the sync problem. Bringing the video into the capture mode in Studio is fine, but the audio has about a 6 second latency delay, which never recovers.
Could it be the REALTEK HD Sound Audio on my P-35 MoBo, maybe bad? I play music, and everything else coming out of my speakers sound fine, it's just the syncing issues with a PCI device that never locks in both the Video with the audio, because there are two different incoming devices. Analog camera video-out to PCI Video-IN, and audio out from analog camera to onboard, MoBo Realtek audio input.
The PCI-500 capture that originally came with my first Studio product (Studio movieboard 12.1) has NO Audio RCA input, only FireWire, S-video, and Video IN and OUT)
P-35 Platinum MS-7345 Mobo
Windows XP Home Edition SP3
Intel Core 2 Quad CPU Q6600 @ 2.40GHz (4 CPUs)
2.4 GHz, 3328 MB Physical RAM
NVIDIA GeForce 8600GT 512 Memory Size
Realtek HD Audio Output Sound
DirectX version: 9.0c
Monitor: Viewsonic VX2035wm Series
WD 500 GB HDD / WD 74GB RAPTOR HDD
Pinnacle PCI-500 Capture card
Nero9
I use the MSI Live Update 4 to update drivers, BIOS, VGA,and Utilities. This system is about four years old. I'm just afraid to flash or update BIOS, thinking I could screw things up.
So I guess my question here is to ask, if maybe the audio input jack on my P-35 Mobo could be defective? Thank you!

Have you try out with a standalone add on sound card? Sometimes, sync problem can be due to processing power or RAM space needed for rendering and merging.

Similar Messages

Bad audio connection

I have a 1st gen ipod shuffle, and it seems that the audio connection is bad. My left ear bud is not working. I even tried different earbuds. if I push the audio connection to one side, I can hear audio on the left side. How can I fix this? I looked all over the discussions and could not find anything on this. I also googled this problem, and it looks like I can order a broken one on ebay and replace the part? Any other Ideas??
This is no longer under warranty.
Thanks!!

See my response to your other post.

Capture analog video audio for MacBook

Is there an inexpensive way to get analog video and audio in/out using my MacBook? I'll be using Final Cut Pro 5.1 Studio to edit. Most of my media will be from my BetaCam SX camera. I will be exporting to DVD, Beta and who knows what for broadcast and internet. Thanks for the help. Gary
MacBook
MacBook

The cheapest viable choice you have is to go DV-rez for your project. All you'll need is a Firewire breakout box such as a Canopus, Pyro AV, or other similar box - they usually cost around the $200 mark.

Bad audio during DV capture

I've just moved up from iMovie 04 and I seem to recall the bug/problem was the same back then. When using Formac's firewire DV converter to capture VHS to iMovie, it sees the video just fine and in the importing process I HEAR the audio fine too, but when playback of the clip, the video looks fine, but the audio is horribly corrupted with a "machine gun" audio that has no connection to soundtrack. As far back as iMovie 04 I think that was the same problem. Does anyone have a solution? It's odd that during import all seems well. The quality of the capture is better than some other 3rd party DV capture apps out there (such as Quicktime Broadcaster!) because the primary difficulty with them is proper FPS even though that setting is made (either 29.97 or 30 FPS). Those apps are usually underpar.
I think this MAY be an audio rate sampling. iMovie may be capturing in one rate but playback is bad because is in another rate? How can this be fixed?

We got this fixed by having someone (and Apple Genius) show us that the Apple Final Cut Express preferences were under the /Users/<username>/Library/Preferences path. We had only looked in the /Library/Preferences/ path. We didn't realize there were two places for preferences.
So, Tom, you were right.
Chalk it up to Mac newbie ignorance.
Thanks for your help.

Audio Connections and K8T NEO FISR2

The audio connection on my Wavemaster case has the following connections:
R-OUT
MIC IN
GND
L-OUT
They are all 4 single pin connectors.
The NEO FISR2 has:
AUD-MIC
AUD-GND
AUD-MIC BIAS
AUD-VCC
AUD-FPOUT-R
AUD-RET-R
HP-ON
KEY
AUD-FPOUT-L
AUD-RET-L
Any ideas as to what the proper connections should be? The only one I’m sure on is the ground. I’ve tried a few combinations with no luck. I’m beginning to wonder if I have a bad daughter card on the Wavemaster or something wrong with the board???

Thanks SAB and southmike,
I'll try that, though I think I'm having sound problems in general. I installed an Audigy2 ZS. I'm getting no sound at all. Here is what is really strange. When I disable the Audio 97 option in Bios, Cool and Quite gives me an error saying that a device file can not be found and that cool and quiet is incompatible with my notherboard. When Audio 97 is re-enabled the message goes away
Any ideas?

MOVED: Front side Audio Connections to mainboard

This topic has been moved to AMD VIA SocketA based board.
Front side Audio Connections to mainboard

Hi,
The front panel audio socket has a "send" and "return" line for the left and right channels. The green socket on the front panel has special switching connections inside it. Normally, the send and return lines of each channel are connected together. The signal returns to the mobo, and is connected to the rear audio out socket. If you plug something into the front socket, the switches open and disconnect the return signal, effectively cutting off the rear output signal. If the front panel socket isn't connected at all, a pair of jumpers have to be fitted between pins 5-6 and 9-10 to connect the signals to the rear socket.
When experimenting, avoid connecting to pins 3 & 4, as these might have some voltage on them.
Cheers

Question installing SATA drive on Delta 2 Platinum mobo

I just got a brand spankin' new Raptor 74gb SATA drive I will be installing on my brand new MSI K7N2 Delta 2 Platinum mobo, and I have a few questions.
First off, I don't have any desire to run a RAID configuration but I want the SATA drive to be my boot drive. So my question is, do I still have to enable RAID in the bios? Or is just Enabling SATA enough?
Second, when I go to install WinXP, do I have to hit F6 and install any drivers?
The mobo did come with a floppy that reads
G72-NVSA020
Nforce3 SATA Raid Driver (For WinXP only)
If I do need drivers, does that floppy have the drivers I will need when installing windows? Or is there a place to download the latest ones I will need?
I am slipstreaming XP SP2 into my XP installation.
Also, I've read that I'm not supposed to have any PATA drives hooked up when installing windows which makes sense.
oh yeah...one more thing...i'm going to be using an AMD xp 3200+ 400mhz bus processor and all I have is three sticks of Crucial PC2100 DDR memory that I wanted to use since I already own it. Is this a bad idea?
thanks a bunch

Thanks for the quick response...I'll be building my system this weekend...I'm waiting for my PC Power & Cooling Silencer 470 ATX power supply that will arrive tomorrow. This bad boy should give plenty of juice (26a on 12v) to power my rig. It's good to know the pc2100 can be used to get the system up and running, but I'll be investing in some pc3200 shortly. I thought of a few more questions if you'd be kind enough to reply:
1) When I buy the PC3200, I plan on getting 2 sticks of 512 and running dual channel. I see you run Crucial ram. Are there any issues with Crucial ram running dual channel that you know of?
2) I have a SB live soundcard but plan on getting an Audigy 2 zs soon, should i just use the onboard sound for now? Is the onboard sound as good as an SB live?
3) Do you recommend using the MSI "LiveUpdate" feature to update bios and drivers, or should I just go with the Nvidia UDP v5.10 and update bios manually? Or maybe I don't even want to update the bios?
Thanks again
-Mike

Front audio connection on Antec Sonata case

I'm building a new system with K8N Neo Platinum and Antec Sonata. It's more or less working now execpt for bits and pieces here and there. I've been scratching my head over the audio connection all afternoon. The only way I can get audio signal to come out at all is to unplug the front audio line, put the jumpers back and get it out of the back.
Did anybody manage to get the front panel audio connection on the Sonata working at all? The pinout for JAUD1 on page 2-20 of the Neo Platinum manual looks exactly the same as front audio header header pin assignment on page 20 of the Intel Front Panel I/O Connectivity Guide. On the Sonata side, page 4 of the Sonata manual says "If your motherboard supports Intel's standard onboard audio connector, you can plug the 10-pin connector directly onto the board". So far so good. Then the Sonata manual goes on to say on page 5:
8. Rear Right Speaker Out Pin: Connect the RET-R connector to this pin.
9. Reat Left Speaker Out Pin: Connect RET-L connector to this pin.
Note: Your motherboard may not support rear speaker output. In this case, you do not need to connect RET-R and RET-L.
This last part makes no sense at all. According to the Intel document, those RET lines are signals returning from the front panel. They have nothing to do with rear channel, and they must be connected or you won't get anything from the rear line out jack. So what's really going on? Any insight would be greatly appreciated.
Andy

Those 8, 9 and the notes only apply if your motherboard does not have the Intel compatibile IO connectors. So you should ignore those lines.

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN

PC Will Not Turn Off ! Please Help P6N Platinum Mobo

Hey Guys,
I just recently finished building a new PC. Well its not complete yet I used some parts from my Older Dell which I plan on Changing in the near future. My problem is that I got everything set up and the System Runs GREAT! its just when I go to shut down the monitor and peripherals turn off but the case fans and cpu cooler keep on running. Am i missing a driver or is there something in the Bios that I am missing? please help!
System.
Vista Ultimate 32bit
Antec 900 Case
P4 3.4HT processor
80gig Seagate HDD
800xPro ATI graphics
2gig OCZ SLI RAM PC-6400
P6N SLI 650i Platinum MOBO
thanks!
D.

Quote
Are you pushing the power button on the case or shutting down via Windows? It may be going into S1 standby.
Quote
Well I get the same Result weather I push the power button or shut down in Vista it turns the screen and keyboard off ( i have g15 keyboard with lcd display) and the case fans still run.
The question is, what your case power-button and the Vista Shutdown function are configured to do.
Make sure the Vista-shutdown-function is really configured to shut down/turn off your computer and not just to suspend it to S1 standby state.
Also, enter BIOS Setup and check that the option "Power Button Function" is really set to "On/Off" and not to "Suspend".
If both settings are configured correctly already, try to set ACPI Standby State to S3 in BIOS and see if the FANs keep running, when you try to turn off your system.
Post your results here.
Also, What BIOS Version are you using?

Does Apple TV and Optical Audio Connection work?

I've read several posts regarding this issue and I'm a little confused. Does the Optical Audio work on the Apple TV (generation 3), because I haven't been able get it to work. I get sound but no stereo/surround sound. Yet, using the same connection out of my Receiver for my PS3 I do get stero/surround sound. Have I missed a setting on the Apple TV?

Is there away I can check the Apple TV Optical Audio connection to see if it's working? The physical connection seems to be fine. Since the connection to A/V Reciever works, as confirmed by my PS3, I can only assume the Apple TV Optical Audio connection is faulty. Other ideas on how I might validate if the Apple TV Optical Audio connection is truly "broken."

Jack-audio-connection-kit doesn't start

Hi,
I need jack-audio-connection-kit Daemon running for use in some other programs, but it seems it dies immediately after starting. See:
[ja@kamahl ~]$ sudo /etc/rc.d/jack-audio-connection-kit start
:: Starting Jack-audio-connection-kit Daemon [DONE]
[ja@kamahl ~]$ ps -e|grep jack
<no output>
I know this is a bit dumb question, but I really have no clue where the problem could be. Do you?

hello,
i'm having the same problem, i can flawlessly run jackd either via CLI and qjackctl, test sound with mplayer, etc.
However, i can't seem to find a solution that let's me do all this as a normal user:
Error output:
jackd -d firewire
Password:
no message buffer overruns
jackd 0.116.2
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
loading driver ..
can't load "/usr/lib64/jack/jack_firewire.so": libasound.so.2: failed to map segment from shared object: Resource temporarily unavailable
cannot load driver module firewire
some info:
$cat /etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
####none /dev/shm tmpfs defaults 0 0
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
UUID=512fbb4a-7c37-4a91-94fd-c2f75bc3ad1c swap swap defaults 0 0
UUID=ce95308e-a444-4d12-a3bf-a1abdcc82eed / ext4 defaults 0 1
lsmod | grep 1394
dv1394 21832 0
ohci1394 34052 1 dv1394
raw1394 29000 0
ieee1394 98912 3 dv1394,ohci1394,raw1394
Should I change udev rules group to audio? How do I do that in Archlinux? :$
$ ls -l /dev/raw1394
crwxrw-rw- 1 root video 171, 0 2009-07-12 14:31 /dev/raw1394
I think it's some sort of permission problem....Any suggestion is welcome! thank you!

Best audio connection

Best audio connection ?
a) itunes computer via RCA stereo connection to home theatre
b Itunes computer streamed to Apple TV , Apple TV connected via optical cable to home theater
c) this I have not tried ... Itune computer connected directly via HDMi to home theater
Also does the sound-card in the computer make a difference ?
Antoine

I have Fredereih ataxia so my only hobby left is musique and no way I have the dexterity to insert a cd in a tray, I have 400 cd's all ripped at 196kb.
I love my Ipad with Itunes and the remote app to take control of my 5 computers in the house.
My apple tv is ok but I do not have a good internet connection.
In the room where I listen the most music, I have a small EEE laptop.
it is directly connected on a 925 pioneer receiver with 9 speakers (RCA)
Also in this room I have the apple TV connected via the Digital audio cable
Recently (I'm in Canada ) I have been using RDIO (Like Pandora) , they claim sending in 256 kb.
I now notice that here is a difference in Quality for the same file sent it different ways.
played directly from the Pc is not as good as if I use Airplay ?
a) should I resample my 400 cd's at 320kb ?
b) should I buy another Laptop with a good soundcard and a HDMI output.
I would appreciate any recommandation for any laptop under 1000$ ( Only Itune will be o n it.
Regards
Antoine

"Choppy" audio connection

Howdy folks,
I've read the FAQs and the various other threads in this forum and I haven't been able to solve this problem of mine on my own. I apologise if I have missed something!
My girlfriend and I are trying to use an audio connection in iChat. Connecting to one another is not a problem, and the audio is typically crystal-clear and uninterrupted *at first*. Soon, however, it will cut out on my side (her side is more or less fine). Sometimes very briefly, sometimes for a second or two. Often it will happen once and be fine for ten seconds or so (never much longer than that, though); other times it will happen in rapid succession. The net effect is that it is difficult to carry a conversation with these interruptions. I'm hoping, however, that there is something I can do. Any ideas?
We are both running the version of iChat that came with Tiger. We also both have PowerBook G4s. My inet connection is to a university network via ethernet. My download and upload rates are, respectively: approximately 200 KB/sec and app. 45 KB/sec. My girlfriends inet connection is wireless with a download rate of app. 320 KB/sec and upload rate of app. 125 KB/sec.
Thanks for your help!
Charles Dobson

Hello, Charles
My hightest recommendation: You should upgrade to 10.4.2. It corrects several issues (including iChat AV issues) that were problems in the previous versions of Tiger.
Try this and any other relevant suggestions from Help for iChat AV 3 Problems.
The testing and tutorial suggestions in Using iSight with iChat AV might also give you some trouble shooting ideas if you are still having difficulty after implementing the above suggestions.
Also, being at a university, you might try at different times of day to see whether busy network traffic is causing problems for you at certain times.
If necessary, you can even take your PowerBook to an off-campus network to help determine whether the problem is in your Mac no matter which network you use to connect.

ERROR - BAD DUPLEX CONNECTION - HP 5000N

After switching our HP5000N laserject printer off and then back on, we are now getting the error "BAD DUPLX CONNECTION"
The problem is that we do not have a duplex unit. Never have had, never will have.
Therefore, clearly the printer is picking up a problem incorrectly.
Does any clever guru type person out there know what I can do to fix this situation?
Any further information you feel i may need to provide, please don't hesitate to ask.
Thanks in advance.
Greg.

How did you replave the duplex belt? How to deassemble the backside of a officejet and click the new belt on? I can't see nor do it y self

Bad audio connection on P-35 Platinum moBo, while capturing analog video?

Similar Messages

Maybe you are looking for