Bad bind var compile time err in OracleSpreadTable ActiveX

I'm interested to learn the implementation procedures for using
ActiveX into Forms 6i applications. How to do I go about
OracleSpreadTable? I have given it a try; but, found some bad bind
variable error while tried to compile.
Steps that I followed:
1) A database block was created based of EMP table
2) Each item of the EMP block was changed to ActiveX
3) Also in Layout wizzard # of row(s) to be shown = 1 was chosen
4*) Each item (ActiveX) of the EMP block were selected to view their
property and respectively OLE informaion was changed to OracleSpreadTable
* Alternatively, I haved tried by right clicking the ActiveX item and
inserting OracleSpreadTable object for each of them.
5) Then by selecting the ActiveX items one-by-one from "Program"
pull-down menu "Import OLE ..." was chose and all the attributes and
methods were taken.
On compile I got bad-bind variable ... :-(
Please help me out: How to incorporate ActiveX in Forms 6i
Application !?
I 'll appreciate your cooperation.
SAJJAD
[email protected]
[email protected]

Similar Messages

Getting a bad bind variable error while compiling a custom form in R12

Hi,
I am getting a bad bind variable error while compiling a custom form.
I tried setting the forms_path variable and I am still getting the error. Can anyone please suggest what can be done?
DECLARE
BEGIN
IF :parameter.p_line_ship_to = 'T'
THEN
IF :SYSTEM.cursor_item = 'LINE.SHIP_TO'
THEN
:parameter.lov_num_param1 := :line.ship_to_customer_id;
oe_lines.ship_to ('WHEN-VALIDATE-ITEM');
:parameter.lov_num_param1 := :line.ship_to_customer_id;
END IF;
:parameter.p_line_ship_to := 'F';
END IF;
END;
I am getting this error:
Bad bind variable 'parameter.p_line_ship_to'

The Parameter is not defined in the form.. But, this form is already been compiled and deployed.. I have to make some changes to the form and tried to compile it, when i am getting this error. Is it possible that the parameter would be defined in some other form or can this error be due to some other reasons?
Thanks in Advance.

"bad bind variable on :PARAMETER.param_name "

Forms version : forms 6i
In Form A
Trigger : WHEN_LIST_CHANGED
DECLARE
list_id PARAMLIST;
BEGIN
-- Testing to see if value present in lobal var
:OT_NES.TEXT_ITEM154 := :GLOBAL.selected_node;
:OT_NES.TEXT_ITEM153 := :OT_NES.LIST150;
list_id := Create_Parameter_List('GES_SETUP_DATA');
Add_Parameter(list_id,'tree_node',TEXT_PARAMETER,:GLOBAL.selected_node);
Add_Parameter(list_id,'list_item',TEXT_PARAMETER,:OT_NES.LIST150);
open_form('cards_config_data',ACTIVATE,NO_SESSION,list_id);
EXCEPTION
WHEN OTHERS THEN
message(SQLERRM);
END;
IN Form B
Trigger Name : When_New_form_instance
DECLARE
the_list PARAMLIST := Get_Parameter_List('list_id');
BEGIN
-- Getting Error here "Bad Bind variable :Parameter" ???
:BLOCK3.TEXT_ITEM112 := :PARAMETER.tree_node ;
END ;
How do I retrieve the parameter values in form B ?
Thanks in Advance
Sharath

:PARAMETER.<name> as you have used is the correct syntax, but you will get this error if you have not actually defined the parameter at design time in the Parameters node in the form.

Oracle 10g Diff in execution plan query with binding var Vs without

We recently did 10g upgrade. In 10g, execution plan differs for query with binding var(thru jdbc etc) Vs without it as given below. For query with binding var,
it chooses poor execution plan(no index is used, full scan is done etc). everything worked fine in 9i. To rectify the problem, we have to hint query with right index,join etc. but i dont like this solution.
I would rather prefer to correct database to choose right execution path instead of eacy query level. but not sure what causes the issue.
Does anybody came across this issue? if so, Please share your experiences. Thanks for the help. Do let me know if you need more info.
1. Query without binding bar:
select * from test where col1 = :1 and col2 = :2
1. Query without binding bar:
select * from test where col1 = 'foo' and col2= 'bar'

I am not an expert but in my humble opinion it is the developer's responsability to ensure the correct explain plan is used before deploying code to production, if the explain plan returned by the DB is bad, then the use of a hint is perfectly acceptable.
Check this out: http://lcgapp.cern.ch/project/CondDB/snapshot/performance.html
Excerpt:
Bind variable peeking. If an SQL query contains bind variables, the optimal execution plan may depend on the values of those variables. When the Oracle query optimizer chooses the execution plan for such a query, it may indeed look at the values of all bind variables involved: this is known as "bind variable peeking".
In summary, the execution plan used for a given SQL query cannot be predicted a priori because it depends on the presence and quality of statistics and on the values of bind variables used at the time the query was first executed (hard-parsed). As a consequence of this instability of execution plans, very different performances may be observed for the same SQL query. In COOL, this issue is addressed by adding Oracle hints to the queries, to make sure that the same (good) plan is used in all cases, even with unreliable statistics or unfavourable bind variables.
Edited by: Rodolfo Ferrari on Jun 3, 2009 9:40 PM

OCIBindByPos() and dynamic SQL (not known at compile time)

Hi,
How can I use OCIBindByPos() or OCIBindByName() if the datatyp of the bind variable(s) is unknown at compile time (the SQL statement is entered by the user at run time)? Or which functions should I use instead?
Many thanks in advance
Edited by: user13176357 on 17.04.2012 12:43

You could write a single native method (with a defined name like "callNative" below) that accepts the name (string) of the actual native function you want to call, and then locates the function via GetProcAddress and calls it. Argument passing and return values could get tricky if the target native functions aren't guaranteed to all have the same signature, but you could handle that by explicit boxing:
native Object callNative (String name, Object [] args);
-slj-

Error 1046: Type was not found or was not a compile-time constant: Component Event.

Hi Everyone..
I am getting an Error 1046: Type was not found or was not a compile-time constant: Component Event.
The ComponentEvent class has been imported,and also the event handling code is there. I am not sure what else is wrong, hope somebody can advise me. Thanks. The code is below, the point where the error occurs as indicated by the compiler has been highlighted.
package
import flash.display.Sprite;
import flash.media.Camera;
import flash.media.Microphone;
import flash.media.Video;
import fl.controls.TextArea;
import fl.controls.Button;
import fl.controls.TextInput;
import flash.events.SyncEvent;
import flash.events.MouseEvent;
import flash.events.FocusEvent;
import flash.net.SharedObject;
import flash.net.NetConnection;
import flash.net.NetStream;
import flash.events.NetStatusEvent;
import flash.events.FocusEvent;
import flash.events.ComponentEvent;
public class VideoChat extends Sprite
private var button:Button;
private var text_so:SharedObject;
private var textArea:TextArea;
private var textInput:TextInput;
private var chatName:TextInput;
private var nc:NetConnection;
private var nsOut:NetStream;
private var nsIn:NetStream;
private var rtmpNow:String;
private var msg:Boolean;
private var cam:Camera;
private var mic:Microphone;
private var vid:Video;
public function VideoChat ()
   //Set up UI
   textArea = new TextArea();
   textArea.setSize(500,280);
   textArea.move(20,54);
   addChild(textArea);
   textInput = new TextInput();
   textInput.setSize(500,24);
   textInput.move(20,340);
   textInput.addEventListener(ComponentEvent.ENTER,checkKey);
   addChild(textInput);
   button = new Button();
   button.width=50;
   button.label="Send";
   button.move(20,370);
   button.addEventListener(MouseEvent.CLICK, sendMsg);
   addChild(button);
   chatName = new TextInput;
   chatName.setSize (100,24);
   chatName.move (80,370);
   chatName.text="<Enter Name>";
   chatName.addEventListener (FocusEvent.FOCUS_IN, cleanName);
   addChild(chatName);
   //Connect
   rtmpNow="rtmp:/VideoChat ";
   nc=new NetConnection;
   nc.connect (rtmpNow);
   nc.addEventListener(NetStatusEvent.NET_STATUS,doSO);
   cam = Camera.getCamera();
   mic=Microphone.getMicrophone();
   //Camera Settings
   cam.setKeyFrameInterval(15);
   cam.setMode (240, 180, 15, false);
   cam.setMotionLevel(35,3000);
   cam.setQuality(40000 / 8,0);
   //Microphone Settings
   mic.gain = 85;
   mic.rate=11;
   mic.setSilenceLevel (25,1000);
   mic.setUseEchoSuppression (true);
   //Video Setup
   vid=new Video(cam.width, cam.height);
   addChild (vid);
   vid.x=10, vid.y=20;
   //Attach local video and camera
   vid.attachCamera(cam);
private function doSO(e:NetStatusEvent):void
   good=e.info.code == "NetConnection.Connect.Success";
   if(good)
    //Set up shared object
    text_so=SharedObject.getRemote("test", nc.uri, false);
    text_so.connect (nc);
    text_so.addEventListener(SyncEvent.SYNC, checkSO);
private function checkSO(e:SyncEvent):void
   for (var chung:uint; change<e.changeList.length; chng++)
    switch(e.chageList[chng].code)
     case "clear":
      break;
     case "success":
      break;
     case "change":
      textArea.appendText (text_so.data.msg + "\n");
      break;
private function cleanName(e:FocusEvent): void
   chatName.text="";
private function sendMsg(e:MouseEvent):void
   noName=(chatName.text=="<Enter Name>" || chatName.text=="");
   if (noName)
     textArea.appendText("You must enter your name \n");
   else
    text_so.setProperty("msg", chatName.text +": " + textInput.text);
    textArea.appendText (chatName.text +": "+textInput.text +"\n");
    textInput.text="";
private function checkKey (e:ComponentEvent):void
   noName=(chatName.text=="<Enter Name>" || chatName.text=="");
   if (noName)
     textArea.appendText("You must enter your name \n");
   else
    text_so.setProperty("msg", chatName.text +": " + textInput.text);
    textArea.appendText (chatName.text +": "+textInput.text +"\n");
    textInput.text="";
//Create NetStream instances
private function checkConnect (e:NetStatusEvent):void
   msg=e.info.code == "NetConnection.Connect.Success";
   if(msg)
    nsOut=new NetStream(nc);
    nsIn=new NetStream(nc);
    //NetStream
    nsOut.attachAudio(mic);
    nsOut.attachCamera(cam);
    nsOut.publish("camstream");
    nsIn.play("camstream");

Hi Guys...
I have found out what is wrong. I was importing the wrong package the correct one should have been:
import fl.events.ComponentEvent;
instead of
import flash.events.ComponentEvent;
I hope this is helpful for anyone caught in a simillar situation as me...Thanks..

Parameter error - bad bind variable in a Package..!!

Hello All
i am tring to create a security package with in one procedure i am trying to handle the number of times the user enters the wrong user name or password:
-i created a parameter on my login form and add it to my procedure and it works just fine,But when i tried to copy the same procedure the package inside my library can't recognize that Parameter.
-It gives me error : bad bind variable.
The code is as follows.
PARAMETER.COUNT := :PARAMETER.COUNT + 1;
IF :PARAMETER.COUNT > 3 THEN
WRONG_ALERT('WRONG_PASS',' ur number of trials has expiered the form will be closed ');
EXIT_FORM;
END IF;
Can anyboady help me pls.
Regards,
Abdetu.

Super,It works Just fine.
Thanks Gerd,
That's make me decide that if i have the following statatment for example:
IF :USER_CODE IS NULL THEN .........
I have to change it to :
IF copy (name_in ('USER_CODE' )) IS NULL THEN..........
But,if i have the following select statment :
==============================
     SELECT USER_CODE , USER_PASS WORD
     INTO :GLOBAL.USER_CODE , :GLOBAL.USER_PASS WORD
     FROM APP_USERS
     WHERE USER_CODE = :USER_CODE
     AND USER_PASS WORD= :USER_PASS WORD;
Should i transfer it to the following:
=========================
SELECT USER_CODE , USER_PASS WORD
INTO     COPY(NAME_IN ('GLOBAL.usr_code'), COPY(NAME_IN ('GLOBAL.PASSWORD')
FROM APP_USERS
     WHERE USER_CODE = COPY(NAME_IN ('USER_CODE' )
AND USER_PASS WORD=COPY(NAME_IN ('USER_PASS WORD');
Pls help me,it's my first time ...
Thanks in advance.
Regards,
Abdetu.

'Error 49 bad bind variable' error message.

When I copied a form that has been working from our Linux server to my PC and compiled it, I received many error messages like this in several procedures, functions and triggers:
“Error 49 at line 69, column 10, bad bind variable ‘edit_Dealer.corporation’
Does anybody know why this is? As I said, the app works for the end user from the Linux server.
Thank You.

Does the form you copied have any attached libraries or subclassed objects? If so, did you copy the Library and Object source files to your PC as well? If you copied these supporting files already, are they in a directory location that is part of your FORMS_PATH?
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Getting compile time errors during gwt application compilation

Hi,
I am getting below compile errors while running ant script for my GWT application.
javac:
[javac] Compiling 32 source files to D:\Projects\workspace\MckSurvey\war\WEB-INF\classes
[javac] D:\Projects\workspace\MckSurvey\src\com\spinsci\survey\client\model\QuestionBean.java:38: type parameters of <X>X cannot be determined; no unique maximal instance exists for type variable X with upper bounds int,java.lang.Object
[javac]           return get("questionId");
[javac] ^
I am using JDK 1.6 and ANT 1.7 s/w.
below is the target which is used in the build file:
<javac srcdir="src" includes="**" encoding="utf-8"
destdir="war/WEB-INF/classes"
nowarn="true"
debug="true" debuglevel="lines,vars,source"
     includeDestClasses="false"
     source="1.5" target="1.5"
          >
<classpath refid="project.class.path"/>
<compilerarg value="-Xlint:-unchecked"/>
</javac>
Please suggest me accordingly to overcome this generics compile time errors.
Regards,
Sunder.

dannyyates wrote:
There are/have been numerous examples of differences in spec interpretation between Eclipse (ecj) and the Sun compiler. I generally find that Eclipse is more accurate in it's interpretation than Sun! :-)
I would suggest raising this on an appropriate Eclipse forum. The guys there are normally very good at digging into the issue and explaining why they think they are right or else admitting that they've got it wrong.I totally agree on both accounts. I myself have seen at least two compiler bugs and asked both the Sun guys and the Eclipse guys (through their respective bug tracking systems) and both have been resolved (in both cases ecj was actually right, but I wouldn't dare drawing any conclusions from that ;-)).

Bad bind variable 'NEW.SYS_NC_ROWINFO$

Hi
in order to assist in error resolution when inserting XML data into a XMLTYPE table I have attempted to create a trigger on the table as
SQL> CREATE or replace TRIGGER VALIDATE_PersonAlert3
2 before insert on pa_tab3
3 for each row
4 declare
5 XMLDATA xmltype;
6 begin
7 XMLDATA := :new.sys_nc_rowinfo$;
8 xmltype.schemavalidate(XMLDATA);
9 end;
10 /
Warning: Trigger created with compilation errors.
and get the following
SQL> show errors
Errors for TRIGGER VALIDATE_PERSONALERT3:
4/19 PLS-00049: bad bind variable 'NEW.SYS_NC_ROWINFO$'
SQL> spool off
Anyone know the answer ?
The Trigger example was based on the Oracle 9i XML Developers Guide.
Is there more to adding XDB to database than running catqm.sql ?

Hi
To install XDB you should also run catxdbj.sql (in the XDB manual, page A-3, you can find more info...).
I had no problem to create a trigger accoring to the documentation...
Chris

Bad bind variable & best practice for delete

I am working with three tables and very new to SQL. I need to create a procedure that will accept an ID and go through two sub tables and delete child records. Item is the main table. I am passing in the ID into the procedure and I want to use it as below. I keep getting a bad bind variable error message. I have verified that the table is setup as a number and my procedure accepts a number. I also want someone to review this from best practice as I am new to procedures.
PROCEDURE DeleteItem (p_ItemID IN NUMBER, p_RowsAffected OUT number)
IS
p_RowsAffected NUMBER;
-- select the itemdetail for the analysis
CURSOR c_itemdetail
IS
SELECT
itemdetailid
FROM itemDETAIL
WHERE itemid = :p_ItemID;
BEGIN
-- loop through each itemdetail and delete the itemdetailoutlay
FOR r_itemdetail IN c_itemdetail
LOOP
BEGIN
DELETE FROM ITEMDETAILOUTLAY
WHERE itemdetailid = r_itemdetail.itemdetailid;
COMMIT;
END;
END LOOP;
-- delete the itemdetail
BEGIN
DELETE FROM ITEMDETAIL
WHERE itemid = :p_ItemID;
COMMIT;
END;
-- delete the main item
BEGIN
DELETE FROM ITEM
WHERE itemdid = :p_ItemID;
COMMIT;
p_RowsAffected := SQL%ROWCOUNT;
END;
END DeleteItem;

Hi,
Welcome to the forum!
As you may notice, this site normally compresses white-space. Whenever you post code, or any formatted text, on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
I don't think you mean to use bind variables anywhere, so don't use colons before any variable names. You were doing this correctly with p_RowsAffected; do the same thing with p_ItemID.
Try this:PROCEDURE DeleteItem (p_ItemID IN NUMBER, p_RowsAffected OUT number)
IS
-- p_RowsAffected NUMBER;     -- Don't name local variables the same as arguments
-- select the itemdetail for the analysis
CURSOR c_itemdetail
IS
SELECT
itemdetailid
FROM itemDETAIL
WHERE itemid = p_ItemID;     -- No : before p_ItemID
BEGIN
-- loop through each itemdetail and delete the itemdetailoutlay
FOR r_itemdetail IN c_itemdetail
LOOP
BEGIN
DELETE FROM ITEMDETAILOUTLAY
WHERE itemdetailid = r_itemdetail.itemdetailid;
COMMIT;
END;
END LOOP;
-- delete the itemdetail
BEGIN
DELETE FROM ITEMDETAIL
WHERE itemid = p_ItemID;     -- No : before p_ItemID
COMMIT;
END;
-- delete the main item
BEGIN
DELETE FROM ITEM
WHERE itemdid = p_ItemID;     -- No : before p_ItemID
COMMIT;
p_RowsAffected := SQL%ROWCOUNT;
END;
END DeleteItem;
The most important "best practice" with PL/SQL is to avoid doing it whenever possible.
If SQL offers a way o do the same thing, it's usally best not to code anything in PL/SQL.
Have you considered foreign key constraints, with "ON DELETE CASCADE"? That way, you could simply "DELETE FROM item", and all the dependent rows in the other tables would automatically be deleted.   You wouldn't need to remember to call a procedure like this; in fact, you would have no need for a procedure like this.
Given that you do have such a procedure:
You're doing row-by-row processing, which some mad wags like to call "slow-by-slow" processing.
For example, iYou're xplicitly finding each ItemDetailID separately, and deleting each one separately, like this:... CURSOR c_itemdetail
IS
SELECT
itemdetailid
FROM itemDETAIL
WHERE itemid = p_ItemID;
-- loop through each itemdetail and delete the itemdetailoutlay
FOR r_itemdetail IN c_itemdetail
LOOP
BEGIN
DELETE FROM ITEMDETAILOUTLAY
WHERE itemdetailid = r_itemdetail.itemdetailid;
COMMIT;
END;
END LOOP;
It's more efficient for the system (and less coding for you) if you let SQL handle as much as possible, so do this instead...     DELETE FROM ItemDetailOutlay
     WHERE ItemDetailID IN
          ( SELECT itemdetailid
          FROM     itemDETAIL
          WHERE     itemid     = p_ItemID
Do you really want to COMMIT 3 times? 0 or 1 times might be better.
What happens if there is some kind of error, say, after you've delete rows form ItemDetailOutlay and ItemDetail, but before you've delete from Item? Wouldn't you want the entire transaction to fail, and leave all three tables in a consistent state? If so, either have the calling procedure COMMIT, or have a single COMMIT at the end of DelteItem.
Edited by: Frank Kulash on May 6, 2010 2:25 PM

Error in trigger: PLS-00049: bad bind variable

Hi,
I am trying one of the XML/XDK samples from technet (http://otn.oracle.com/tech/xml/htdocs/XDBDemo2.html) and get this error while compiling the trigger: here's the code snippet
create or replace trigger PURCHASEORDEREXPLOSION
instead of insert on NEWPURCHASEORDER
for each row
declare
begin
DOCUMENT := :new.PODOCUMENT; <--Error here: PLS-00049: bad bind variable 'NEW.PODOCUMENT'
I can't understand why is this happening? Any clues??
Thanks!
-Rajeev

You don't specify bind variables with the colon ":" prefix in PL/SQL.
The procedure you posted builds a query using string concatenation. Even if you remove the colon from your variable name you still won't be using bind variables.
If you want to use bind variables you should consider doing the following:
1. Use the DBMS_SQL package.
2. Use EXECUTE IMMEDIATE with the USING clause.
3. Use OPEN <REF CURSOR> FOR <STATEMENT> with the USING clause.
Each one has different advantages/disadvantages.
If looks as if you want to pass in a dynamic IN list. If you use bind variables it will effectively treat the entire list as ONE value enclosed in single quotes. If you truly want a dynamic IN list you need to investigate another method.
Tom Kyte has some information on Dynamic IN lists here: [How can I do a variable in list?|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:210612357425]

Bad bind variable error

Hi all,
I have this code in a PB trigger:
declare
v_alert_button number;
invalid BOOLEAN;
CURSOR C_REFNO_SEARCH IS
SELECT * FROM REFNO_LIB.REFNO_02000_IDENT
WHERE CAGECDXH = :CONTROL.C_CAGECDXH AND
REFNUMHA = :CONTROL.C_REFNUMHA;
BEGIN
OPEN C_REFNO_SEARCH;
FETCH C_REFNO_SEARCH INTO :REFNO_02000_IDENT;
invalid := C_REFNO_SEARCH%NOTFOUND;
IF invalid then
V_ALERT_BUTTON := SHOW_ALERT('REFNUM_NOT_FOUND');
END IF;
CLOSE C_REFNO_SEARCH;
REDISPLAY;
END;
I can't compile this trigger code cleanly. I get a error on the FETCH statment pointing to ":REFNO_02000_IDENT" as a bad bind variable. I'm trying to populate the ":REFNO_02000-IDENT" data block without having to key in over 50 items that are in the block.
Any help is appreciated.
Thanks

It's not possible what you want. I guess you have to key in the items. Forms tries to find the item :REFNO_02000_IDENT and can't find it becuase it doesn't exist. Thats why you get bad bind variable.

10g declare :global variable error (bad bind variable)

In a 10g form, I tried this code in the pl/sql block and in the spec of a library package
begin
:global.config := 'x';
...upon compile, I get an error
"bad bind variable"
...encountered the symbol "GLOBAL" when expecting one of the following...It doesn't like :GLOBAL.variablename := 'x';
What am I doing wrong?
Thank you.

globals are allowed in librarys, but in libraries you have to use COPY and NAME_IN to access objects you access via :-logic in forms-modules, e.g. setting the global would be like
COPY('X', 'GLOBAL.CONFIG');Edited by: aweiden on 29.10.2008 19:33

BAD BIND Variable in Trigger

What's wrong with this script
desc     psaudit;
Name               Type
AUDIT_OPRID     VARCHAR2(30)
AUDIT_STAMP     DATE
AUDIT_ACTN     VARCHAR2(1)
RECNAME          VARCHAR2(15)
FIELDNAME          VARCHAR2(18)
OLDVALUE          VARCHAR2(65)
NEWVALUE          VARCHAR2(65)
KEY1               VARCHAR2(65)
KEY2               VARCHAR2(65)
KEY3               VARCHAR2(65)
KEY4               VARCHAR2(65)
KEY5               VARCHAR2(65)
KEY6               VARCHAR2(65)
KEY7               VARCHAR2(65)
KEY8               VARCHAR2(65)
KEY9               VARCHAR2(65)
KEY10          VARCHAR2(65)
KEY11          VARCHAR2(65)
KEY12          VARCHAR2(65)
KEY13          VARCHAR2(65)
KEY14          VARCHAR2(65)
KEY15          VARCHAR2(65)
22     rows     selected
CREATE OR REPLACE TRIGGER JOB_TR
AFTER INSERT OR UPDATE OR DELETE ON PS_JOB_BT
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
V_AUDIT_OPRID VARCHAR2(64);
BEGIN
DBMS_APPLICATION_INFO.READ_CLIENT_INFO(V_AUDIT_OPRID);
IF :OLD.RECNAME IS NULL
THEN
INSERT INTO PSAUDITWRK
VALUES (GET_PS_OPRID(V_AUDIT_OPRID),SYSDATE,'I',:NEWRECNAME,:NEWFIELDNAME,:NEWOLDVALUE,:NEWNEWVALUE,:NEWKEY1,:NEWKEY2,:NEWKEY3,:NEWKEY4,:NEWKEY5,:NEWKEY6,:NEWKEY7,:NEWKEY8,:NEWKEY9,:NEWKEY10,:NEWKEY11,:NEWKEY12,:NEWKEY13,:NEWKEY14,:NEWKEY15);
ELSE
IF :NEWRECNAME IS NULL
THEN
INSERT INTO PSAUDITWRK
VALUES (GET_PS_OPRID(V_AUDIT_OPRID),SYSDATE,'D',:OLD.RECNAME,:OLD.FIELDNAME,:OLD.OLDVALUE,:OLD.NEWVALUE,:OLD.KEY1,:OLD.KEY2,:OLD.KEY3,:OLD.KEY4,:OLD.KEY5,:OLD.KEY6,:OLD.KEY7,:OLD.KEY8,:OLD.KEY9,:OLD.KEY10,:OLD.KEY11,:OLD.KEY12,:OLD.KEY13,:OLD.KEY14,:OLD.KEY15);
ELSE
INSERT INTO PSAUDITWRK
VALUES (GET_PS_OPRID(V_AUDIT_OPRID),SYSDATE,'B',:OLD.RECNAME,:OLD.FIELDNAME,:OLD.OLDVALUE,:OLD.NEWVALUE,:OLD.KEY1,:OLD.KEY2,:OLD.KEY3,:OLD.KEY4,:OLD.KEY5,:OLD.KEY6,:OLD.KEY7,:OLD.KEY8,:OLD.KEY9,:OLD.KEY10,:OLD.KEY11,:OLD.KEY12,:OLD.KEY13,:OLD.KEY14,:OLD.KEY15);
INSERT INTO PSAUDIT
VALUES (GET_PS_OPRID(V_AUDIT_OPRID),SYSDATE,'A',:NEWRECNAME,:NEWFIELDNAME,:NEWOLDVALUE,:NEWNEWVALUE,:NEWKEY1,:NEWKEY2,:NEWKEY3,:NEWKEY4,:NEWKEY5,:NEWKEY6,:NEWKEY7,:NEWKEY8,:NEWKEY9,:NEWKEY10,:NEWKEY11,:NEWKEY12,:NEWKEY13,:NEWKEY14,:NEWKEY15);
END IF;
END IF;
END JOB_TR;
Warning: compiled but with compilation errors
LINE/COL ERROR
5/4 PLS-00049: bad bind variable 'OLD.SYSADM'
8/49 PLS-00049: bad bind variable 'NEW.RECNAME'
8/62 PLS-00049: bad bind variable 'NEW.FIELDNAME'
8/77 PLS-00049: bad bind variable 'NEW.OLDVALUE'
8/91 PLS-00049: bad bind variable 'NEW.NEWVALUE'
8/105 PLS-00049: bad bind variable 'NEW.KEY1'
8/115 PLS-00049: bad bind variable 'NEW.KEY2'
8/125 PLS-00049: bad bind variable 'NEW.KEY3'
8/135 PLS-00049: bad bind variable 'NEW.KEY4'
8/145 PLS-00049: bad bind variable 'NEW.KEY5'
8/155 PLS-00049: bad bind variable 'NEW.KEY6'
LINE/COL ERROR
8/165 PLS-00049: bad bind variable 'NEW.KEY7'
8/175 PLS-00049: bad bind variable 'NEW.KEY8'
8/185 PLS-00049: bad bind variable 'NEW.KEY9'
8/195 PLS-00049: bad bind variable 'NEW.KEY10'
8/206 PLS-00049: bad bind variable 'NEW.KEY11'
8/217 PLS-00049: bad bind variable 'NEW.KEY12'
8/228 PLS-00049: bad bind variable 'NEW.KEY13'
8/239 PLS-00049: bad bind variable 'NEW.KEY14'
8/250 PLS-00049: bad bind variable 'NEW.KEY15'

Hi,
Your trigger still don't have any reference to OLD.SYSADM, meaning those compile errors are from something else.
You should
1. Format your trigger (Which you have to some degree)
2. Paste it into SQL*Plus
3. Followed it by alter trigger ... compile
4. And show errors.
5. Paste back everything here
6. Remember to enclose SQL*Plus output in {noformat}{noformat} tags
Regards
Peter
edit:
I take back what I said about formatting. This is how it looks formatted:create or replace trigger job_tr
after insert or update or delete
on ps_job_bt
referencing new as new old as old
for each row
declare
v_audit_oprid varchar2(64);
begin
dbms_application_info.read_client_info(v_audit_oprid);
if :old.recname is null
then
insert into psauditwrk
values (get_ps_oprid(v_audit_oprid)
,sysdate
,'I'
,:newrecname
,:newfieldname
,:newoldvalue
,:newnewvalue
,:newkey1
,:newkey2
,:newkey3
,:newkey4
,:newkey5
,:newkey6
,:newkey7
,:newkey8
,:newkey9
,:newkey10
,:newkey11
,:newkey12
,:newkey13
,:newkey14
,:newkey15);
else
if :newrecname is null
then
insert into psauditwrk
values (get_ps_oprid(v_audit_oprid)
,sysdate
,'D'
,:old.recname
,:old.fieldname
,:old.oldvalue
,:old.newvalue
,:old.key1
,:old.key2
,:old.key3
,:old.key4
,:old.key5
,:old.key6
,:old.key7
,:old.key8
,:old.key9
,:old.key10
,:old.key11
,:old.key12
,:old.key13
,:old.key14
,:old.key15);
else
insert into psauditwrk
values (get_ps_oprid(v_audit_oprid)
,sysdate
,'B'
,:old.recname
,:old.fieldname
,:old.oldvalue
,:old.newvalue
,:old.key1
,:old.key2
,:old.key3
,:old.key4
,:old.key5
,:old.key6
,:old.key7
,:old.key8
,:old.key9
,:old.key10
,:old.key11
,:old.key12
,:old.key13
,:old.key14
,:old.key15);
insert into psaudit
values (get_ps_oprid(v_audit_oprid)
,sysdate
,'A'
,:newrecname
,:newfieldname
,:newoldvalue
,:newnewvalue
,:newkey1
,:newkey2
,:newkey3
,:newkey4
,:newkey5
,:newkey6
,:newkey7
,:newkey8
,:newkey9
,:newkey10
,:newkey11
,:newkey12
,:newkey13
,:newkey14
,:newkey15);
end if;
end if;
end job_tr;
It is immediately seen that this
      if :newrecname is null
Should be
      if :new.recname is null
And this error isn't even shown in your eledged compile errors.
Edited by: Peter Gjelstrup on Feb 10, 2009 7:00 AM

Bad bind var compile time err in OracleSpreadTable ActiveX

Similar Messages

Maybe you are looking for