Bad bios flash!!! Please help me?!!!

hey guys if im not supposed to make a new thread please tell me.
So i recently update my bios on my z77 gd55 using m-flash and after the update it didnt boot and its still not booting, all my fans and hdds and everything is on but the display is off. What can i doo??? Im 15 so i dont have money to go around buying motherboards! How can i fix my rig? Please help

Quote from: Froggy Gremlin on 13-August-13, 10:24:52
POST is the initial checkdowns prior to the point the OS initiates and the UEFI/BIOS can be accessed. Boot is the actual entering into the OS and desktop.
In your manual, it should explain the location of the clear CMOS button or clear CMOS jumper location.
If nothing helps, the choices are few. Have a shop in your area that has an SPI flash programming device fix it for you, or send the board to an MSI Service Center after submitting and receiving an RMA authorization.
>> How To Contact MSI <<
so should i contact technical support or rma cus i only want to rma if i really have to!?

Similar Messages

Bad BIOS Flashing - Please Help !

Hello,
I'm having a serious trouble because the BIOS UPDATE failed since I had a power outage while I was updating the BIOS.
Since that, I couldn't get any video output, it's only 8 beeps with the orange light, and then the blue light and nothing happens. Is there a way to prepare an USB KEY with the BIOS updates, initiating the CPU with the Windows+B keys pressed on?
I've tried to apply the BIOS UPDATE SP63535 who had the BIOS version ANP_704.bin
Please HELP ME, thanks a LOT !!!
Klaus

Hello @klausbert,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your desktop computer is not able to get any video output, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend following the steps in this document on Recovering the BIOS. This should help restore the BIOS back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

790FX-GD70 winki Bad bios checksum (please help!!) unresolved

I have the 790FX-GD70 winki edition motherboard only for a few weeks, then i went on holiday for a week and when i came back and started up the computer it came up with the error:
Bad BIOS checksum. Startin BIOS Recovery ...
Checking for USB Devise ...
Reading file "A7577AMS.2xx"
but then it does nothing, iv tried puting the bios files for the winki edition and the normal edition onto a USB pen but it just comes up with that error and doesnt get past it.
My Specs Are
AMD Phenom II X4 955 Black Edition
790FX-GD70 Winki Edition
Sapphire Radeon HD 4890 2GB Vapor-X
Kingston HyperX Triple Channel Kit - memory - 6 GB ( 3 x 2 GB ) - DIMM 240-pin - DDR3
Western Digital WD10EADS Caviar Green 1tb SATAII 32Mb Cache
1TB Wester Digital
Ezcool 700W PSU
Iv been trying to fix this for a week and nothing will work.
cheers

Quote from: eminem2o4 on 07-October-09, 05:13:05
i just tired clearing it with the jumper(you dont have to press the button when you swich the jumper do you?) and it is still coming up with the same error
Bad BIOS checksum, Starting BIOS Recovery
I really dont know what to do?
and could any1 give advise on good 6gb AMD RAM?
cheers
Quote
and could any1 give advise on good 6gb AMD RAM?
Such combination is not recommended in AMD systems as you must use 2x2GB and 2x1GB memory stick to obtain it.
Which is not good idea[mixing memory sticks]
For best results and optimal performance, use 2x matched memory sticks only.
Quote
I really dont know what to do?
Go to reseller to sort for you.
Let him try with different memory sticks{AMD Tested}.
The message may gone by itself, often such fake message can come from bad or not compatible memory stick.
Quote from: Hans on 08-October-09, 01:14:27
Make sure to change the extension to .ROM.
Nope, system is expecting original file name A7577AMS.200 as Bas mention as well.
Quote from: Hans on 08-October-09, 01:26:19
Ah, I see. Thought it needed a .ROM, but I'm obviously wrong.
But if we already knew this, what's this whole topic about then?
Get the file on a stick and make it recover. Can't be that hard... ???
Quote
Get the file on a stick and make it recover. Can't be that hard... ???
I would suggest to try with AMD regular memory stick 1st before attempt any BIOS recovery.
Else he really can kill his board, while attempt to recover healthy BIOS{Too possible to be memory error and not BIOS failure
[bad|not compatible memory stick can produce the same fake message.]
Also BIOS hardly can corrupt to this stage by itself, he tell never touched the BIOS:
Quote from: eminem2o4
and no iv never tried to flash the bios before, and no1 was near my comp when i was away

MOVED: BIOS PANIC---Please Help!!! (Amd athlon Xp2100+)

This topic has been moved to AMD Socket A Forum
BIOS PANIC---Please Help!!! (Amd athlon Xp2100+)

...OK...you're in the wrong forum but here's what happened...your FSB was set to 100 after you flashed...correct setting for 2100+ XP is 133 (2 X 133 = 266MHz)...

HI YANN/VADIM...Still having problem in BADIs...please help me out

Hi Yann/Vadim,
Facing a problem in BADI can u please help me out...
I am implementing sourcing dashboard.
I am facing problem while implementing the badi BBP_ECS_PO_OUT_BADI in SRM. and BBP_PO_INBOUND_BADI in R3.
i have written following code in BBP_ECS_PO_OUT_BADI in SRM
method IF_EX_BBP_ECS_PO_OUT_BADI~BBP_B46B_PO_OUTBOUND.
data : ls_item type BBP_PDS_PO_ITEM_D.
data : w_customer_fields type BBPS_IF_CUSTOMER_FIELDS_PI.
move 'POITEM' to w_customer_fields-refobject.
move 'CATALOGID' to w_customer_fields-fieldname.
move ls_item-catalogid to w_customer_fields-container.
append w_customer_fields to ct_bapi_customer_fields.
endmethod.
i have created field zsrmcatalogid field in R3 in EKPO table.and i am now implementing the Badi in R3 for BBP_PO_INBOUND_BADI .....in extended classic scenario.
i have written following code in R3 BADI
method IF_EX_BBP_PO_INBOUND_BADI~BBP_MAP_BEFORE_BAPI.
data : wa_customer_fields type bbps_if_customer_fields,
wa_bapi_te_mepoitem type bapi_te_mepoitem,
wa_bapi_te_mepoitemx type bapi_te_mepoitemx,
wa_extensionin type bapiparex.
data : txt_960(960) type c.
read table bbp_customer_fields into wa_customer_fields with key
refobject = 'POITEM' fieldname = 'CATALOGID'.
if sy-subrc eq 0.
move wa_customer_fields-container TO
wa_bapi_te_mepoitem-zsrmcatalogid.
wa_bapi_te_mepoitemx-zsrmcatalogid = 'X'.
endif.
clear txt_960.
clear wa_extensionin.
write wa_bapi_te_mepoitem to txt_960 left-justified.
wa_extensionin-structure = 'BAPI_TE_MEPOITEM'.
wa_extensionin-valuepart1 = txt_960(240).
wa_extensionin-valuepart2 = txt_960+240(240).
wa_extensionin-valuepart3 = txt_960+480(240).
wa_extensionin-valuepart4 = txt_960+720(240).
append wa_extensionin to bapi_extensionin.
clear txt_960.
clear wa_extensionin.
write wa_bapi_te_mepoitemx to txt_960 left-justified.
wa_extensionin-structure = 'BAPI_TE_MEPOITEMX'.
wa_extensionin-valuepart1 = txt_960(240).
wa_extensionin-valuepart2 = txt_960+240(240).
wa_extensionin-valuepart3 = txt_960+480(240).
wa_extensionin-valuepart4 = txt_960+720(240).
append wa_extensionin to bapi_extensionin.
endmethod.
But its not working...
The PO details are not passed from SRM to R3.......
PLEASE CAN U GIVE ME EXACT CODE FOR CHANGES TO BE MADE IN THIS BADI ..AS IT IS NOT WORKING...
Can anybody help me regarding how to debug the BADI in R3.
Thanks in Advance...

Hi Ravi,
You can transfer the standard SRM catalog ID field to R/3 tracking number field (if not already used for another purpose) in the R/3 PO.
This will avoid to implement the R/3 inbound bapi.
Here is an extract of the code.
The ECS PO badi example was here used to transfer the unlimited delivery flag to R/3 PO for a Z combination of criteria as well as the transfer of <b>catalog ID</b> to <b>tracking number field</b> in R/3 PO :
method IF_EX_BBP_ECS_PO_OUT_BADI~BBP_B46B_PO_OUTBOUND.
update unlimited delivery flag in R3 PO for combination of vendor +
Product Category maintained in the bespoke table ZUD_PC_VNDR ..
LOOP AT ct_bapi_poitem INTO ls_bapi_poitem.
    lv_tabix = sy-tabix.
    IF ls_bapi_poitem-po_item IS NOT INITIAL.
      READ TABLE it_item INTO ls_item
           WITH KEY number_int = ls_bapi_poitem-po_item
                      del_ind    = ' '.
      IF sy-subrc = 0.
Set Unlimited delivery Flag
        read table li_zud_pc_vndr into ls_zud_pc_vndr
                        with key partner       = ls_partner-PARTNER_ID
                                   category_id = ls_item-category_id.
        if sy-subrc eq 0.
          ls_bapi_poitem-UNLIMITED_DLV = 'X'.
        endif.
Set the Dummy catalog.. entry..
        if ls_item-catalogid eq c_dummy.
          ls_bapi_poitem-TRACKINGNO = c_noncat.
        endif.
        ls_bapi_poitem-GR_BASEDIV = ' '.
        modify ct_bapi_poitem from ls_bapi_poitem index lv_tabix
                      transporting UNLIMITED_DLV TRACKINGNO GR_BASEDIV.
      ENDIF. "READ TABLE it_item ..
    ENDIF.   "IF ls_bapi_poitem-po_item ..
ENDLOOP.   "LOOP AT ct_bapi_poitem ..
endmethod.
Kind regards,
Yann
PS : please do reward helpful answers ))

Flashing Pixels (Bad Video) Apple please help!

I read another topic about this (which has been archived without being answered) POST: http://discussions.apple.com/thread.jspa?threadID=1174473
I have these incessant flashing Green/blue pixels in windows through boot camp which makes it intolerable to use. It does this with the built in display but not with the extended display which I use on 270 degree orientation so I can't use that instead.
Seems to be a huge number of people in that post with this complaint and my situation fits it exactly. It used to work fine and at some point (not sure which update exactly due to infrequent use at the time) it went bad. Nothing I do will fix it. I've even wiped the HD, repartitioned, reinstalled windows on boot camp and then restored my OSX with Time Machine... Allot of hassle for no results. Only saving grace was Time Machine with the OSX side of that effort.
I want to know why apple refuse to even comment on this and maybe offer some thoughts on this? Maybe a fix even? Instead of locking the topic and shutting us up instead of working with us. What's next? A cover up to hide the fact? Maybe Apple should just delete the complaints from the support forums.
Apple, please help, this is beyond tolerable and I need boot camp for a couple of Windows Only apps. If I had a choice I would defiantly use OSX versions.
Just a side not. When I wiped the HD and went to reinstall form the backup the OSX installer recognized the destination and source but refused to run the restoration. I shut the whole thing down and started again and it worked fine.
Apple please help!

I'm having the same problem, I thought that Leopard's Boot Camp would fix it but it didn't work.

Notebook G6-2006tx bad bios flash....now not starting up....Please help URGENT!!

I am having a G6-2006tx.....And I saw something like bios update on Hp website and downloaded it....then I installed it on my laptop now the laptop is not turning on screen is full black(No light) and capslock is constantly blinking(Ones then after 1-2 second again once)......I suspect I did wrong bios update...and please help me to solve this problem>

Hi,
Please use the following page:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01732674&tmp_task=solveCategory&cc=us&dlc=en&lc...
Please contact HP for assisstant (CPU):
World wide support:
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
In the US:
http://welcome.hp.com/country/w1/en/support.html
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

MB Dead now after flashing, please help!@

Writing this on my old p1.
I just flashed my Neo 2 865PE to 1.4 and now it wont boot!
On my bracket on the back the top right one is red rest are green..
What now? Am I screwed? Nothing but problems with this MSI board I tell you....
Please help!

Get 1.3 from the website if that's what your board came with originally. If it's not, get the one that came with your board. The reason I say that is that is, at least for me, the flashing program says there is a Bootblock Mismatch with all other bios' except what came with my motherboard. ?(
Make that backup disk and remane that bios file for your board to AMIBOOT.ROM. and have it in.
Unplug your power. Take out your RAM. Clear the Cmos via the jumper, I believe it's JBAT1. Put your RAM back in. Then power up. Maybe have someone turn on the power while you hold down the Ctrl + Home Key. You really have to be fast. When you get your floppy, the board will read from it and restore your bios - then beep 4 times. It will then reboot. If you're lucky, all will be ok and you can go in and reset your settings in the Cmos.
I want to make this suggestion to anyone who flashes their bios': Have that backup disk in while you flash. If the flash goes bad, when you hit the reset button, immediately the boot block will hunt for that AMIBOOT.ROM file. If you shut down your power with the power button, your system won't power back up. You will swear it's dead. You won't get it back until you unplug your power cord, clear your cmos, reset your RAM, power back on and IMMEDIATELY hold down the Ctrl + Home Key. I really don't know what is going wrong with these bios releases, but for some boards, they appear to kill the board. I'm convinced that I will never be able to use any other bios but 1.3. There is a glitch in the chip evidently. With the bios that came programmed on the chip, you can, seemingly, get your board back. At least, that's been true for me.
Just keep trying. I believe you can get your board back. The boards are really nice but really finicky.
Mark

Bios Downgrade please help

Hi
First of all sorry for my english...ok...I have a problem on my probook 6550b with which I have been dealing for two days now...i format my disk install a fresh copy of Win 7 ultimate 64 bit...I download al the drivers and update my bios...comp starts to working slowly,like laggy...i updated win with all the updates, use nod 32, scan everything, use speedupmypc etc...everything loks ok, but computer is still very slow...so i format again...do the same thing again...no results...So I assume that the problem is in the new version of BIOS...and here are my problems start...i tried do flash with older version but it wound let me(failure) I tried with windows key + b + power button holding 3 sec...i get black screen, fan starts to spining at ful, but nothing happend(i wait for 3min,3 times), and then i cannot power down comp unless i take my battery out..so my question is, is it posible to flash backwards on my laptop, or am i risking to brick my comp?????
PLEASE HELP!!!

Hm, @Manjunath, does what you suggest actually downgrade the BIOS or simply reset bios settings to the factory default settings? I understood that a BIOS downgrade is not possible in all instances, though this would be clearly stated in the BIOS release notes if a downgrade is not possible after the update.... So if there is no such downgrade warning/statement in any BIOS release notes between the current BIOS and the desired older BIOS, it should be possibly by simply running the HPQFlash.exe with the older BIOS and accepting the prompts/warning that the new BIOS is older than the current BIOS (i.e. a downgrade). If there was a warning/statement in the release notes of a any BIOS between the current BIOS and desired older BIOS, then it wont be possible without specialist tools, software and/or effort (if at all)!

Bad BIOS Flash

Hello guys, i need help with a problem with my msi 970-g46 Motherboard. i have downloaded the latest bios available. i execute the file and the computer froze, entirely! y restart it with the case button and now it start but to a blank screen and nothing more! i have tried the ami bios recovery method of AMIBOOT.ROM and ctrl + home in the keyboard but nothing happens, i have also tried the method of msi with the usb bios file directly on the root directory and nothing happens, in both cases the usb continues reading and do nothing...
I dont know what else to do..... Please HELP!!!!
My entire hardware is
MSI 970-G46
Nvidia GTX 260
Corsair XMS 3 4GB ram Dual channel Config
Corsair CX600 PS
AMD FX 4100 CPU
P.S: Sorry about my English, I'm from Venezuela

The board is bricked, sorry. It requires being restored with an SPI flash programming device by a pc-shop or MSI. If still under warranty rma the board.

Text editable in images in flash Please help

Hello
Dear All Friends
I want to make text editable in images in flash to get copy from text
can i Make this
and other question please
can i convert text in image in flash to normal string ?
please help
Thank you

Images do not store text data in any isolateable manner, it is comprised of just pixels like anything else in the image. You would need to develop some form of complicated text recognition program to be able to extract text from an image, and I don't believe anyone has.

Actiontec GT701C DSL light keeps flashing please help

I use to have the WIFI router from verizon but the wifi range was not strong enough for certain items in my home... in addition the items could not even find the network on wifi. i replaced it with a Actiontec GT701C so i could use my old wireless router that was strong enough to support my whole home .. But know when i connect my DSL line to the New modem the GT701c i can not access the internet .. i Could get to the configure screen but other than that the DSL Light keeps flashing any suggestions.. i have rebooted the modem and tryed diffrent phone line and phone jacks in my home please help !!!

Does your older modem connect still? If so, could you tell us which modem it is so that we could help you obtain the Transceiver Statistics from it? It's possible the ActionTec could either be defective or it could be sensitive to noise on the line if the signal isn't the greatest.
========
The first to bring me 1Gbps Fiber for $30/m wins!

HTML into Flash please help!

I want to put a HTML webpage into a certain field that is
scrollable and when a link is clicked that box will change to give
the content from the new page in that field ... please help, and
also can javascript hover-off links from a webpage be put into
flash?

1. Flash contains a TextField component which has
limited
html support, not enough to support the usual html required of
an active web page.
Supported
html tags for Flash Player 8
2. You can use usual html
anchor
tag in a Flash TextField.
3. You need to turn on html for a Flash TextField. This can
be done in the
IDE
or in
Actionscript.
4. You can also use
CSS
formatting in a Flash TextField.
5. For rollovers of specific parts of a Flash TextField, you
will need to use Actionscript and generate TextFields for each part
of the addressable text such as every word or every phrase goes
into a separate TextField and then the TextFields are aligned to
appear as one larger TextField.
Flash requires a different design mentality than do
HTML/CSS/JavaScript pages. So there are more creative approaches to
present the information you have using Flash that are not easy or
even possible in HTML/CSS/JavaScript.

Another person who has a problem with Flash - Please Help!!

I have a Dell Dimension 4700 Intel (R) Pentium (R) - 4 CPU 2.80 GHz 2.79 GHz 504 MB of RAM
For a few years now I would have to restore the computer to an earlier time after an update was done in order to view youtube, etc. It seemed that when my computer did an automatic update it would mess up the flash player.
My husband just recently did another update and now the flash isn't working and the computer won't restore anymore.
I keep getting the following messages: adobe flash player active x set up failed to install 19166
program error: failed to register status installation complete
I have uninstalled and installed the flash several times
everytime i go to install flash it says: Adobe Flash Player 10: This application has been downloaded before. Reload?
Then I get: Your security settings do not allow websites to use ActiveX controls installed on your computer.
I don't want to take this somewhere because I have a feeling that will just wipe the computer clean and I have a feeling it is something stupid that I'm not doing.
Please Help.

OK...Check, check...did all that. I am cutting and pasting a segment from the flash troubleshooting page because its exactly what is happening to me. There were no responses to help this person.
"I've tried installing flash player 9 but am not able to do so. It will begin installing but when it gets to 'items remaining: 4' the progress bar continues to move and underneath says searching but nothing happens. I tried leaving it on all night but same thing when I came back in the morning. When I close the installer it then says 'stopping now may result in an incomplete set of software' Also, when I tried uninstalling previous versions, the uninstaller does nothing. It says 'items uninstalled: 0' and 'processing', but same thing, the thing spins but nothing happens. i tried the other steps given to see if that helped but nothing seems to work."
Here is the page...
http://sdc.shockwave.com/cfusion/webforums/forum/messageview.cfm?forumid=44&cati d=184&threadid=1267248&enterthread=y#4577694
I tried some of the suggestions above the last two posts. But it looks like my problem is the same as those.
I even tried to post on there but from what I see it looks like I have to have flash to do it...I get the page with the blue lego brick.
I'm pulling my hair out. I didn't realize how much of the internet ran on flash.

Delete Flash, please help!

Hi, how to delete complet flash for reinstall again.
Full delete fron windows registry. Because, wen i delete from
add/remove programs, and reinstall, the problem persist.
I want that it takes me like a clean installation, as if
outside the first time that I install.
Please Help!!
Thank you very much!

Hi. I had the same problem. You have to download the flash
un-installer from this web site. I forget how I found it, but if
you search for it under "Search" on this web site, you'll probably
find it. I think that is what I did. Once you have downloaded it,
you have to run it and it will uninstall flash. Carefull though.
Once you remove it, you cannot re-install it from this web site.
Check that you have "Flash.exe" on your computer. I found mine in:
C:\WINDOWS2\SYSTEM\MACROMED\FLASH.
The icon is a circle colored grey with a small " f " in it.
This will download Flash again for you. I don't know why it is not
shown in the Macromedia web site. I couldn't find it here myself.
Hope this helps. I'm running Windows98.

Bad bios flash!!! Please help me?!!!

Similar Messages

Maybe you are looking for