Bad cab file

The cabinet file 'iTunes.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
Tried installing/updating to iTunes 10.0.01 (or whatever the newest one is) seven times now, different browsers (Firefox, IE), nothing helps. Never had any trouble in 4 yrs prior. Nothing new on the computer since last iTunes upgrade. Any way to replace the bad .cab file?

imaji wrote:
I have a desktop and laptop, iTunes on both. I've always synced my iPhone thru the laptop. If I use the desktop, am I going to screw anything up? There's different music, pictures, and stuff on each computer, and I'm pretty sure I don't want all of it on my phone, but I'm not sure how to teach the phone to discriminate.
The iPhone will sync to your iTunes library on the machine you connect it to. It is a lot easier to pick one machine and always sync with that one. If there is something on the second computer that you want, copy the items to a USB flash drive, then from the flash drive to the main computer, where you will add them to your main iTunes library.
If you don't want (or don't have room) to sync your entire library to the device, check the option for "sync selected playlists," and choose the ones you want.

Similar Messages

CS2-installing error "data1.cab" file corrupt

I have recently reformatted my C drive and reinstalling programs.
I tried to reinstall my CS2 Photoshop, but received error message that the "data1.cab" file was corrupt or missing. Could not install program.
I don't know how to fix. Could someone please help?
Thanks,
mmspry

from a disc? try to copy the photoshop folder from the disc to the desktop, then run setup from there. however, you might have a bad drive or a bad disc. if the setup from the desktop fails, try installing on another machine. if it still fails, the disc probably has a problem. if that works, maybe your drive needs replacing.

Can I delete Data1.cab files?

I am doing some file maintenance and I notice that I have 3 Data1.cab files in different folders.
C:\program files\adobe\acrobat\setup files\acropro\efg
C:\program files\adobe\acrobat\setup files\acropro\efg_
C:\program files\adobe\acrobat\setup files\acropro\enu
The files are quite large, one over 440 mb. Can I delete all or any of these? Once I'm installed and running do I need them?
Thanks.
Nathan

That would be a bad thing. You probably wouldn't be able to uninstall
or repair Acrobat.
Aandi Inston

Can I update with a CAB file after I installed BizTalk ?

Can I update my base configuration of BizTalk with a cab file after everthing is installed and configured ?
I missed installing it while I was installing BizTalk for the first time, now I want to update it with a CAB file. Is that possible ?

Hi,
BizTalk Server relies on different products and technologies to provide essential services and features. CAB file contains softwares that are required by BizTalk server to
successfully install on your computer.
You can select the cab file based on the edition and server you working with. Link below:
Redistributable CAB Files
Now coming to your question, as I have mentioned above the CAB file contains the
prerequisites
required for successful installation of BizTalk. While installing BizTalk on Redistributable
prerequisites
screen you must have either manually or automatically installed the CAB file already.
If you have already successfully installed and configured BizTalk, I dont see any issue with the CAB file.
I don't buy that 90% consumption of the CPU is due to bad or wrong CAB file selected while installing BizTalk.
I would advise you to go through the below link:
What you need to do to prepare for and install BizTalk Server
Rachit

How to install MSFT application security updates in cab file format using DISM

Hi,
I tried to install security updates for MS Office which are cab files like any other windows security updates cab file. It is giving an error called "file not found". But other windows security updates cab files are installing fine without any error.
I tried to install these updates manually using DISM on commandline. It is not installing. I even tried using pkgmgr.exe, but that is not working either. I looked at DISM logs which is saying it failed opening the cab file. I tried different other commandline
options of DISM to install this, but nothing else is suitable for a cab file install.
Does anyone know how to install a cab file for application security updates via DISM.exe or other MSFT commandline tools?
Thanks,
ANSA
DISM log:
=======
2015-02-25 14:42:59, Info                  DISM   PID=4916 Scratch directory set to 'C:\Windows\TEMP\'. - CDISMManager::put_ScratchDir
2015-02-25 14:42:59, Info                  DISM   PID=4916 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Failed to get and initialize the PE Provider. Continuing by assuming that
it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Manager: PID=4916 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM.EXE:
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
2015-02-25 14:42:59, Info                  DISM   DISM.EXE:
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Executing command line: "C:\Windows\System32\Dism.exe" /online /add-package /packagepath:"C:\ProgramData\Application
Data\Autonomic\ANSA Patch Manager\_Installs\mscomctlocx-x-none_8699d53bec82460b948612f4f35d2f6a0ad018f4.cab" /ignorecheck /norestart
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Manager: PID=4916 Successfully loaded the ImageSession at "C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B"
- CDISMManager::LoadImageSession
2015-02-25 14:42:59, Info                  DISM   DISM Image Session: PID=11836 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\OSProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\OSProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM OS Provider: PID=11836 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM OS Provider: PID=11836 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\LogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\LogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider OSServices - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\PEProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Warning               DISM   DISM Provider Store: PID=11836 Failed to Load the provider: C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\PEProvider.dll.
- CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Failed to get and initialize the PE Provider. Continuing by assuming that
it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Manager: PID=4916 Image session successfully loaded from the temporary location: C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B
- CDISMManager::CreateImageSession
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider OSServices - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Target image information: OS Version=6.1.7601.17592, Image architecture=amd64
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\CbsProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\CbsProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 CBS is being initialized for online use. More information about CBS actions can
be located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\MsiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\MsiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\IntlProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\IntlProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\DmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\DmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2015-02-25 14:42:59, Info                  DISM   DISM OS Provider: PID=11836 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
2015-02-25 14:42:59, Info                  DISM   DISM Driver Manager: PID=11836 Further logs for driver related operations can be found in the target operating
system at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\UnattendProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                 DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\UnattendProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\SmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\SmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\TransmogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\TransmogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: OSServices
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: MsiManager
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: MsiManager.
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: IntlManager
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: IntlManager.
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DriverManager
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DriverManager.
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: SmiManager
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Edition Manager
2015-02-25 14:42:59, Info                  DISM   DISM Transmog Provider: PID=11836 Current image session is [ONLINE] - CTransmogManager::GetMode
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Processing the top level command token(add-package). - CPackageManagerCLIHandler::Private_ValidateCmdLine
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Encountered the option "packagepath" with value "C:\ProgramData\Application
Data\Autonomic\ANSA Patch Manager\_Installs\mscomctlocx-x-none_8699d53bec82460b948612f4f35d2f6a0ad018f4.cab" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed opening package. - CDISMPackageManager::Internal_CreatePackageByPath(hr:0x80070002)
2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed to get the underlying CBS package. - CDISMPackageManager::OpenPackageByPath(hr:0x80070002)
2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed to open the package at location: "C:\ProgramData\Application Data\Autonomic\ANSA
Patch Manager\_Installs\mscomctlocx-x-none_8699d53bec82460b948612f4f35d2f6a0ad018f4.cab" - CPackageManagerCLIHandler::ProcessPackagePath(hr:0x80070002)
2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed while processing command add-package. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x80070002)
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Further logs for online package and feature related operations can be found at
%WINDIR%\logs\CBS\cbs.log - CPackageManagerCLIHandler::ExecuteCmdLine
2015-02-25 14:42:59, Error                 DISM   DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=80070002
2015-02-25 14:42:59, Info                  DISM   DISM Image Session: PID=11836 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Finalizing CBS core. - CDISMPackageManager::Finalize
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: DISM Package Manager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found the OSServices. Waiting to finalize it until all other providers are
unloaded. - CDISMProviderStore::Final_OnDisconnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found the PE Provider. Waiting to finalize it until all other providers
are unloaded. - CDISMProviderStore::Final_OnDisconnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(DriverManager) - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: DriverManager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(DISM Unattend Manager) - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found the OSServices. Waiting to finalize it until all other providers are
unloaded. - CDISMProviderStore::Final_OnDisconnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(Edition Manager) - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: Edition Manager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Releasing the local reference to OSServices. - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: OSServices - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:43:00, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
2015-02-25 14:43:00, Info                  DISM   DISM.EXE:
2015-02-25 14:43:00, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
2015-02-25 14:43:00, Info                  DISM   DISM.EXE:
2015-02-25 14:43:00, Info                  DISM   DISM Image Session: PID=4916 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
2015-02-25 14:43:00, Info                  DISM   DISM Provider Store: PID=4916 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:43:00, Info                  DISM   DISM Provider Store: PID=4916 Found the OSServices. Waiting to finalize it until all other providers are
unloaded. - CDISMProviderStore::Final_OnDisconnect
2015-02-25 14:43:00, Info                  DISM   DISM Provider Store: PID=4916 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

You need to extract and install it - Refer this link
http://blogs.technet.com/b/askcore/archive/2011/02/15/how-to-use-dism-to-install-a-hotfix-from-within-windows.aspx
Regards Chen V [MCTS SharePoint 2010]

How do I find bad music files? I have thousands of files, but some are bad. When I try to load them into iTunes, it just spins. I need a routine to identify and remove the bad files. Any ideas?

How do I find bad music files? I have thousands of files, but some are bad. When I try to load them into iTunes, it just spins. I need a routine to identify and remove the bad files. Any ideas?

Hi ajoddo20,
Welcome to the Apple Support Communities!
You can use Home Sharing to import music and other media from one computer to another. Please use the instructions and information located in the attached article for information on how to complete the process.
iTunes 11 for Mac: Use Home Sharing to import items from another iTunes library
Cheers,
Joe

Error occurred in deployment step 'Add Solution': Failed to extract the cab file in the solution.

I have received the follwoing error when I depoly the custom masterpage with css, images, javascript files:
Error occurred in deployment step 'Add Solution': Failed to extract the cab file in the solution.
Any help will soon is appreciated.

Hi Bagalur,
Thanks for your sharing. It will help others who stuck will the same issue.
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jerry Guo
TechNet Community Support

New HDD, purchased recovery material, recovery Faliure, CAB file HP_SSRD_LOG.CAB is corrupt

Hello,
The Hard Drive failed and I purchased a new one. Purchaed recovery (DVD) disks. Have tried twice to recover and in each occuance recieved the error recoevery Failed.
How do I create a PIN-log
[13:18:01.07] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[13:18:01.07] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[13:18:01.08] ------------------------------------------------------------------------------------------
[12:14:51.87] Start BBOffline.cmd...
UPDrv=[C:]
[12:14:51.87] Set UIA Error Code to 951
[12:14:52.17] Delete [FBI] folder.
[12:14:52.19] WinPE is 64bit.
[12:15:16.65] Starts [FixUps].
[12:15:16.69] ---------------------------------------------------------------------
[12:15:16.69] FixUps.cmd...
[12:15:35.03] FixUps.cmd completed...
[12:15:35.05] ---------------------------------------------------------------------
[12:15:35.05] Starts [Tweaks for SSRD].
[12:15:35.07] ---------------------------------------------------------------------
[12:15:35.07] SSRD Tweaks to change user default locale...
[12:15:35.07] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
[12:15:35.25] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US ".
[12:15:49.73] ---------------------------------------------------------------------
[12:15:49.74] Launch PININST.exe for Offline ...
[12:17:10.23] Starts [Sleep 10 sec].
[12:17:20.31] Starts [Create RStoneFUpdate.INI].
[12:17:21.41] Starts [create 1GB Pagefile for offline].
Volume in drive C has no label.
Volume Serial Number is AE90-CC9C
Directory of C:\System.sav\bbv
01/23/2015 12:17 PM     1,073,741,824 pagefile.sys
               1 File(s) 1,073,741,824 bytes
               0 Dir(s) 35,020,972,032 bytes free
[12:17:21.64] Brand detection.
[12:17:21.86] Customize error handling for Specialize ~ BBV1.
        0 file(s) copied.
[12:17:21.88] ---------------------------------------------------------------------
[12:20:21.77] Check Win 8 configuration...
[12:20:22.78] Check system ID...
[12:20:23.82] Check OS SKU...
[12:20:24.83] Check option code...
[12:20:25.92] Check brand name...
SKU_DEF_COUNTRY=[244]
SKU_DEF_SYS_LOC=[en-US]
Reset country in administrator...
Reset country in Default user...
Reset System locale
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Image Version: 6.2.9200.16384
Reporting offline international settings.
Default system UI language : en-US
System locale : en-US
Default time zone : Pacific Standard Time
User locale for default user : en-US
Location : United States (GEOID = 244)
Active keyboard(s) : 0409:00000409
Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
Installed language(s): en-US
Type : Fully localized language.
The operation completed successfully.
Updated System Locale info...
[12:20:43.98] Start PIN Tweaks...
[12:20:45.00] ---------------------------------------------------------------------
[12:20:45.02] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[12:20:45.02] ----------------------------------------
[12:20:45.02] Tweaks for OOBE's Unattend.xml
[12:20:45.02] to pick up the proper file...
[12:20:45.02] ----------------------------------------
[12:20:45.02] rename unattend.org to unattend.or_
[12:20:45.06] ----------------------------------------
[12:20:45.06] without Light Sensor..
[12:20:45.09] ----------------------------------------
[12:20:45.10] This is Restored image by SSRD [SSRD.flg]...
[12:20:45.12] ---------------------------------------------------------------------
[12:20:45.99] Start MIR Tweaks...
[12:20:47.03] ---------------------------------------------------------------------
[12:20:47.03] [MIR Tweaks] ...
[12:20:47.03] ---------------------------------------------------------------------
[12:20:48.00] Start Factory Update(s)...
[12:21:55.10] Start QFE Offline installation...
[13:18:00.80] PININST_OFF: PASSED...
[13:18:00.88] Type C:\System.sav\Logs\BBFindEr.log...
[13:18:00.89] Type C:\System.sav\Logs\BBFindE0.log...
---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
Result=PASSED
[13:18:01.05] Found some error at QFE Offline installation...
[13:18:01.05] Check C:\System.sav\Logs\BBFind4QFE.LOG to see which QFE got the issue...
[13:18:01.07] Check C:\System.sav\Logs\QFEOff\KBxxxxx.log.txt to see the detail...
upon further investigation
Extracting to "C:\Users\dwalke\AppData\Local\Temp\wz876d\"
Use Path: yes   Overlay Files: yes
The operation completed successfully.
Extracting CTOERROR.flg
The operation completed successfully.
CAB file HP_SSRD_LOG.CAB is corrupt

@Oregondeere
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/Hello
Cheers,
KarolB
I work for HP

An error occurred while attempting to install the BizTalk application: Failed extracting CAB files.

Ok I have a BizTalk Application that's called :
FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200
I know that is a long name but why should I be punisched when I create an installer for that. I also have a WebService that exposes this schema. And this webservice is stored inside the MSI cab files. So far so good.
But now when I try to install this MSI alongside all my other MSI's I get the following message :
Failed to extract file "C:\Program Files\Generated by BizTalk\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200\36FAA7B1-99DE-4AF6-A910-ED56D02D84EF\WebDirectory\-FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.WES\App_Data\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.Schemas.FinancieleOpdrachtLogistiekMiddel_v0200.xsd".
(Length=306)
The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters., (NULL), (NULL), (NULL).
If i could install in C:\Program Files\Generated by BizTalk\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200 but the extraction would take place in d:\temp or whatever, I would not have a problem. But unfortunately it extracts in a subdir of an already
very long path......
Is there anybody who knows how to solve this... (can I tell the MSI to use D:\TEMP\ as an extract folder).
And using shorter names is not an option.
Well0549, Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

You can control the destination path of resources in your MSI by modifying them in the Resources folder of a BizTalk application.
%BTAD_InstallDir% defaults to C:\Program Files\Generated by BizTalk\... etc etc. You can put in whatever you like here.
You can get more granular control over the resources by using the
BTSTask.exe tool.
If you can tell me how to make the extract process of he cabs point to c:\temp i will be happy to use BTSTASK (wich i am already doing). But the problem is with the extraction oft he web service. It will extract to :
C:\Program Files\Generated by BizTalk\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200\36FAA7B1-99DE-4AF6-A910-ED56D02D84EF\WebDirectory\-FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.WES\App_Data\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.Schemas.FinancieleOpdrachtLogistiekMiddel_v0200.xsd
Wich is just to long. I want the cabs to extract to c:\temp or something like that.....
Well0549, Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Wsusscn2.cab file does not contain information of the Bulletins released in November.

MS released 16 new bulletins this November on Patch Tuesday.
However all our attempts to acquire any of the new patches failed.
Our initial investigation shows that information for these bulletins has not been added to wsusscn2.cab . we are completely dependent on this file for all the bulletin information and at this moment it appears that this cab file
has not been updated with the latest information. Extraction of the cab file shows that the last updated date if the internal files is 27th/28thOctober.
There is a package.xml file in the cab and that file would normally contain URL’s for the new patches.
I noticed the year and the month url’s only up until the last month. There are no entries for the month of November. Hence the patch acquisition cannot find information related
to the new bulletins

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to use cab files in jsp & ear

I have a jsp page and a cab file which helps change printer settings.. I have embedded the activex control(cab file) as follows.. Is this ok?
<object id="factory" style="display:none" viewastext
classid="clsid:1663ed61-23eb-11d2-b92f-008048fdd814"
codebase="ScriptX.cab#Version=5,60,0,375">
</object>
Also where do I place the cab file? I want that the file should be downloaded the first time the user visits the jsp page.

You should be able to just bring the files into DreamWeaver. It should edit the HTML part of the JSP just fine.

Corrupt CAB File

Hello,
I hope I have placed this in the correct forums here on TechNet. I have a corrupt CAB file and am looking on ways to correct it. We use WINRAR to open CAB files. When I attempt to open it via WINRAR I am being told "The archive is either in unknown
format or damaged." I have multiple CAB files generating this error, but not all of them.
Does Microsoft have a tool, or does anyone have any experience on the best way to repair these CAB files? These CAB files contain archived emails we are using with our Enterprise Vault system.
Thanks for any assistance!

What software creates the CAB files? (rhetorical) I'd contact their support for solutions.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Data1.cab file is present but empty after download for Acrobat Pro XI

I am trying to upgrade to Acrobat Pro XI and have downloaded the files. The extraction process took quote a few attempts before it worked on my PC and I'm now doing the install. It get to a point where 'Error 1311 Source file not found' appears and asks me to check on the data1.cab file and retry. The file is present but is empty (0kb) so when I hit 'retry' the same message just appears again.I am downloading from Adobe direct, not from a disc and am downloading onto a PC.

there's only one self-extracting file you need to download. make sure your dl is complete.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Data1.cab file cannot be used

I was just given my daughters Ipod since she got a new one and am trying to load the software and get that the data1.cab file can not be used, it says it could be a network error, an error reading from the cd or a problem with this package, I than said to retry and got the same message, than said to ignore it and got internal error 2350 and than error1603
Can anyone tell me what to do.

let's try getting an itunes 7 installer log to the Apple engineers for a look.
1. Open a command prompt window. (Start menu -> Run. Type in "cmd". Hit return.)
2. Drag and drop iTunesSetup.exe onto the window so that the full pathname of the file is at the command line prompt.
3. Type in a space, then the following line:
/l*v C:\log.txt
4. Hit return.
5. The installer will create a log file:
C:\log.txt
Find that file and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

Error 1311 - missing Data1.cab file

I have researched this problem and still need help because I think my problem is different. First off, here's what happened...
I purchased and legally own CS4 Master Collection. I had it installed on my desktop. I ended up uninstalling Adobe Acrobat 9 pro. A week after doing that I had to do a system restore to a restore point BEFORE I uninstalled it. So the program obviously showed up again but with the error. Because of the error I uninstalled CS4 completely, thinking I could reinstall it again. Well when I went to reinstall, it already said that Adobe Acrobat 9 was installed already so I wasn't able to select it again to reinstall. All of the other programs installed just fine. And then when I go to try repair Acrobat 9, it doesn't even show as being installed with the other CS4 collection. And when I double click to open it, it does open and when I go to repair it, it will open up an installation box saying it's going to install and then gives that error 1311 saying the Data1.cab file is missing. And it is missing.
So my question is, how do I uninstall it when there's no option to uninstall it. Or how do I get the needed Data1.cab back in place to see if it will indeed install properly?

Sorry about that, my desktop is running Windows Vista home edition.
I can uninstall every program through the add & remove programs feature except for Adobe Acrobat 9.0 pro. It doesn't show up as even being installed. Same with when I uninstalled and reinstalled it. It didn't give me the option to select it for installation.
Ok, I'm just uninstalling the programs again and will run the cleaner tool. Fingers crossed that it removes it!

Bad cab file

Similar Messages

Maybe you are looking for