Bad calling stadas

bad calling stadas stadic

Hi Josh,
meanwhile we have solved the issue, we have used traditional route patterns..
the problem was in the sending wrong type and plan settings to ISDN provider (External phone number mask didnt matched the translation pattern on the GW and therefore it was sent like unknown/unknown and correct value should be Plan : ISDN and Type: National)
thank you very much for a piece of your time and for replying on this topic.

Similar Messages

BADi called from transaction FB60

Hi all
I am looking for a BADi called from transaction FB60 in ECC 6.0. This is needed due to the fact we will develope a solution where we transfer the cost from an invoice booked to an intern order and transfer the cost and currency to CRM 7.0. Please if there is anybody who know a Badi that is triggered when the transaction FB60 is Saved, it will be very help full to us.
Best Regards
Camilla

Hi,
Re: Need user exit or BADI for FB60
Best regards, Christian

Bad Call Tag

Hi all
This may be a stupid question but i wonder where the Bad call tag informoation can be found.
If an agent press on the Bad line button in CTI OS Agent software where does this information end up?
Where can i find if anyone have used this feature?
Br Patrik

I think with the advent of more modern communications it's alot less relevant. My understanding (though I maybe wrong) is in the past the bad call tag would have been used to mark calls where the line is bad (where the sound quality is bad) so you could a discount the call from the stats and use the information in the DB to try and trace the lines which have issues.
Regards

IPhone 5 bad call voice quality

Got the new iPhone 5 and have bad phone call quality. The recipient of the call seems to be able to hear me ok, but their voice either isn't there or drops out or sounds grainy like when you have bad cell reception. Many times, the calls have just not connected. I know that that my cell reception and the recipients cell reception were excellent. This has occured when calling other cell phones, land lines, and toll free numbers. Anyone else having this issue? Have an appointment at Apple tomorrow morning to see what they think.

PROBLEM IDENTIFIED (..maybe)
Update: Have not gone to the AT&T store yet, but was trying out some tests and think LTE is causing the problem. I am in an LTE capable area (Outside Washington DC). When I disabled LTE in the cellular settings, the phone calls sound clear. When I enabled the LTE in the settings, the majority of the time, I was having the bad voice call quality. Not sure if this would happen on Verizon network too, but could you try it out and see if you have the same results? If anyone else trys this test out, let me know your results.
As an aside, My brother who lives in a non-LTE capable area has had no issues with call quality. Could be coincidence, but hope I have pinpointed the problem.

Finding BADI calls in ABAP Code

Hi Guys,
I want to find which program(s) call BADI Interface WORKORDER_UPDATE-INITIALIZE.
I've tried the where-used list without luck.
Also tried a break-point, but it doesn't stop.
PeteA

I did the same...
after double clicking
Program                        LCOBHU10
CLASS/INterfaces    :
/SAPMP/CL_IM_CMTS                Implementation Class for BAdI Impl. /SAPMP/CMTS
/SAPTRX/CL_IM_PP_WOUPDATE        Imp. class for BAdI imp. /SAPTRX/PP_WOUPDATE
CL_EX_WORKORDER_UPDATE           BAdI Class CL_EX_WORKORDER_UPDATE
CL_IM_PGTR_COMP                  Imp.Class for BAdI Imp. PGTR_COMP
it is strange due the fact yoa are using SAP 4.7 too (maybe different level of upgrades ?? )
Message was edited by: Jacek S³owikowski

Enabling multiple BAdi Calls

Hello there,
i'm relatively new to ABAP and SAP R/3. I use SAP CRM 5.0, and implemented an
address check for the transaction BP (for creation of business partners) via
the BAdi "address_check". Now I'd like to know why a BAdi is only called
once after an input or modification of data on a form and how can it be
activated that a BAdi can be called multiple times without modifying the data
on the form?
Thank you very much in advance,
Greetings, Paul

Hello Paul
I cannot give you a precise answer since I do not have access to an CRM 5.0 system. Given the name of the BAdI (ADDRESS_CHECK) I except the BAdI to be executed in two situations:
(1) Assuming we have a "CHECK" button in the "Create business partner" transaction available the BAdI should be be triggered when pushing this function.
(2) The BAdI should be triggered when the button SAVE is pushed because this is definitely the last change where an address check would make sense (e.g. prevent saving the business partner due to failed conditions in the address check).
Usually the naming of the BAdI methods allows a "best guessing" about when the methods are executed.
Regards
Uwe

BADI calls to Syncronous scenario in XI/PI

Can anyone explain how to use the BADI to make a call to get the info in Syncronous communication
Thanks
RP

HI
You can use the RFC adapter in XI to make Sync call to BADI.
Whats the detail requirement.
Thanks
Gaurav

SAP SRM Contract : identify Creation/Release and restrict BADI call

Hi There!
I need some suggestion on one of the issue i'm having now:
The SRM contract workflow works on n-level approval for which a BADI is implemented for the approvers. Now for one of the custom sub-process i need to trigger a different workflow from this BADI which works BUT create as much of workflow items as the number of calls of the BADI. Is there way to identify the code/identifier which say it is a 'SAVE' or 'RELEASE' event and also how can i restrict some piece of code inside the approval badi to be called only at the last call of the badi?

Dont you want to show a release value to every one ?
Purchaser should know what is going on contract?
what are the POs released?

ERROR IN BADI CALLING PROGRAMME

HI EXPERTS,
I have defined a sample badi with single method 'dividing' with params    number1, number2 , result ,status.status is for throwing exception .
   Now my problem is in the following programme it is unable to create 'exit'.it is showing the message failed.
could u resolve it.
class cl_exithandler definition load.
data: exit type ref to ZIF_EX__BADITEST_DEFINE.
data: v_rnum type i,
      v_stat type c.
selection-screen begin of block b1.
parameters:p_num1 type i,
           p_num2 type i.
selection-screen end of block b1.
start-of-selection.
CALL METHOD CL_EXITHANDLER=>GET_INSTANCE
EXPORTING
    EXIT_NAME                     = 'Z_BADITEST_DEFINE'
    NULL_INSTANCE_ACCEPTED        = seex_true
CHANGING
    INSTANCE                      = exit
EXCEPTIONS
     others                        = 1.
if not exit is initial.
call method exit->dividing
    exporting
     number1 = p_num1
     number2 = p_num2
    changing
     result = v_rnum
     status = v_stat .
else.
    message 'failed' type 'I'.
endif.
if V_stat = space.
write : / 'result : ', v_rnum.
endif.
Regards,
Pavan.

Hi,
I think you have not implimented the defined badi.
For every badi defined there should be implimentation in se19.
Thanks,
NN.
Edited by: Nethaji babu on Apr 28, 2008 2:42 PM

BAdI- Call for DataSource Enhancement! - Where?

Hi,
i have a question ... i have implemented a filterbased BAdI to enhance DataSources. I have implemented BADI Definitions, Implentations etc ...
But, where is the Position where i should call this BAdI? Should i call it, in the Customerexit RSAP0001?
I thought, the new BAdI technology replaced the Customerexit RSAP0001.
I appreciate your help
regards
ergin

check the below paper:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3001894b-b1fb-2910-77ba-e80b6f2053b7?quicklink=index&overridelayout=true
M.

BADI Call

Hi All,
I want to call a BADI in my program.
when I write this code below there is no error.
DATA: obj_badi          TYPE REF TO zen_point,
    GET BADI obj_badi.
where zen_point is an enhanement point defined by me.
But when I write the code below, it gives error that "type of sbadi is unknown"
DATA: obj_badi          TYPE REF TO sbadi,
    GET BADI obj_badi.
where sbadi is the name of a system defined badi definition.
Could anybody tell what is the error?
Regards,
Jeetu

Why would you want to call a BAdI in the first place?

Why do I get 'Bad Calling Dll Convention' ?

Hi,
the attached fiel contains an experimen to read dll made in LV 8.6 and use it in VB6.
The zip file contains the vi (adding 2 numbers), LV project, VB6 project.
The function seems to work. it adds the numbers but still, it gives the error 'Bad dll calling convention'.
I think I made it right. i used the Standard Calling Conventioin. I used Double in LV and Long in VB.
how do I get rid from this error?
Can sombody use this example on his machine. May be it's something to do with my specific machine?
Solved!
Go to Solution.
Attachments:
LVDLL Experiment.zip ‏23 KB

Rafi,
I took a look at your code and I think that the problem may be in your expectation of what's going to happen. At the point that you build into a DLL, your AddNumbers VI becomes a function call. You are then passing a string into that function call but you don't have anything coming back out of it.
As an experiment, I took your VI and wired the "concatenated string" output to one of the icon terminals and then added a function export for it in the DLL function. It looked something like the following (both the C prototype and the VB equivalent):
' void AddNumbers(double x, double y, char string[], double *xY, char concatenatedString[], int32_t len)
Declare Sub AddNumbers Lib "C:\Users\jasonw.AMER\Desktop\LVDLL Experiment\SharedLib.dll" _
   (ByVal x As Double, ByVal y As Double, ByVal myMsg As String, ByRef xy As Double, ByVal outString As String, ByVal stringLength As Long)
I then tested calling that function and I think it's safe to say that it's properly passing strings because I was able to get the returned string of "the message recevied by the dll is.....My First Message". Here's what my calling code looked like:
   Dim outStr As String * 100
   Call AddNumbers(x, y, "My First Message", xy, outStr, 100)
   Debug.Print outStr
So I think it's working properly. There's no need to append the null character apparently (although I did notice in your code that you had enclosed the Chr(0) in quotes...it should be without quotes to properly give a null character...but you can leave it out altogether).
Long story short, your code probably was working right. Hope that helps.
Jason

BADI - Call my Z impl from multiple impl of BADI

Hello,
I have created my own Z implementation of a BADI defn.
Already i see that there are some more Z implementations of the same BADI.
Now How can i make sure that my Z impl will be called?
Thanks
Rick

Hi,
Click on F1 help at Multiple Use check box in your BADI.
You will come to know, all the active implementations for a multiple use BADI will be called in an unpredictable sequence:-)
To make sure that, keep a user breakpoint and check whether it is getting called.
Cheers,
Raja.D

Iphone 5s - Bad call quality

Hi, I recently noticed a problem on my iphone 5s, everytime when I received a call, I barely heard the caller, the voice seemed to be coming from a well, not clear at all. What should I do?

Hello Elbeyrouni,
If I understand correctly, the call volume used to be fine but now it's hard to hear the other person.
Here are some steps to try for that.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Increase the volume during the call.
Make sure nothing is blocking the receiver. If you're using a protective case or display film, remove it and try again.
Make sure nothing is plugged into the headphone jack or the dock connector.
Check the receiver opening to see if it is clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush.
Try another location with better signal. If the audio issue happens only when on a call, it could be due to the location.
If the iPhone is paired with a Bluetooth headset or a car kit, try turning off Bluetooth on your device. Learn more about troubleshooting Bluetooth connections.
Restart the iPhone.
Make sure your device is up to date.
If the issue is not resolved, contact Apple Support.
Thank you for visiting Apple Support Communities.
Nubz

BAdI called on changes of development objects?

Hi!
I’m looking for a way to get notified when a development object (some code, DD-Item etc.) is changed. For example when it is saved, activated or added to a transport request. I would then like to run some ABAP Code to filter, do some logging and possibly sending an email.
I’ve already examined the BAdI CTS_REQUEST_CHECK but its method CHECK_BEFORE_ADD_OBJECTS is not yet implemented by SAP.
Can anyone point me to another BAdI or Enhancement Spot or some other solution to get aware of and handle changes?
BTW we are one NW 7.01
Thanks a lot,
Bernhard

closed

Bad calling stadas

Similar Messages

Maybe you are looking for