Bad case of the slows
Problem description:
iMac has slowed considerably recently, especially in Safari. Scrolling pages is jumpy and sticky, I can out-type the keyboard easily and the spinning beachball seems to be my constant companion.
I had the same issue a couple months ago so I maxed out the RAM, cleaned up the caches and log files and pruned most of the cookies and other crap from Safari. Of course they come right back when you visit sites again.
Seems like the hard drive is accessing a lot more, too, even when I’m not doing anything. The first drive I had died and this is a replacement drive.
EtreCheck version: 2.1.8 (121)
Report generated February 20, 2015 at 10:11:54 AM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2010) (Technical Specifications)
iMac - model: iMac11,2
1 3.6 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 5670 - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:6:53
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Mac OS (disk1) / : 998.97 GB (852.36 GB free)
Core Storage: disk0s2 999.35 GB Online
HL-DT-STDVDRW GA32N
USB Information: ℹ️
American Power Conversion Back-UPS BR1500G FW:865.L2 .D USB FW:L2
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Firewire Information: ℹ️
Seagate FA GoFlex Desk 800mbit - 800mbit max
disk2s1 (disk2s1) <not mounted> : 32 KB
Shenyang (disk2s3) /Volumes/Shenyang : 2.00 TB (1.80 TB free)
WD My Book 111D 800mbit - 800mbit max
disk3s1 (disk3s1) <not mounted> : 32 KB
My Book (disk3s3) /Volumes/My Book 34 : 2.00 TB (1.78 TB free)
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Library/Application Support/MacKeeper/AntiVirus.app
[not loaded] net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) [Click for support]
[loaded] net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) [Click for support]
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4234 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] com.Belcarra.iokit.USBLAN_netpart (3.1.1 - SDK 10.6) [Click for support]
[not loaded] com.Belcarra.iokit.USBLAN_usbpart (3.1.1 - SDK 10.6) [Click for support]
[not loaded] com.RemoteControl.USBLAN.usbpart (3.1.1 - SDK 10.7) [Click for support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) [Click for support]
[not loaded] com.wdc.driver.1394HP (1.0.9) [Click for support]
[loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.11) [Click for support]
[not loaded] com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) [Click for support]
[loaded] ng.uds.netusb.controller (1.0.0d1) [Click for support]
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_netpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.netpart.panther (1.6.3) [Click for support]
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_usbpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.usbpart.panther (1.6.3) [Click for support]
/System/Library/Extensions/2.2.0/RemoteControl.USBLAN_usbpart.kext/Contents/Plu g-Ins
[not loaded] com.RemoteControl.USBLAN.panther (1.6.2) [Click for support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) [Click for support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) [Click for support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) [Click for support]
Startup Items: ℹ️
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist [Click for support]
[running] com.amazon.sendtokindle.launcher.plist [Click for support]
[running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Click for support]
[loaded] com.epson.esua.launcher.plist [Click for support]
[running] com.epson.eventmanager.agent.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.seagate.SeagateStorageGauge.plist [Click for support]
[running] com.wdc.raidmanagerstatusmenu.plist [Click for support]
[running] net.interacto.flavours.agent.plist [Click for support]
[loaded] net.interacto.flavours.bg.plist [Click for support]
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.wdc.SmartwareDriveService.plist [Click for support]
[running] com.wdc.WDRAIDDriveService.plist [Click for support]
[running] com.wdc.WDSmartWareService.plist [Click for support]
[running] com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist [Click for support]
[loaded] net.interacto.flavours.helper.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.mlbam.nexdef.plist [Click for support] [Click for details]
[loaded] com.spotify.webhelper.plist [Click for support]
[running] com.zeobit.MacKeeper.Helper.plist [Click for support]
User Login Items: ℹ️
Garmin Lifetime Map Updater Application Hidden (/Applications/Garmin Lifetime Map Updater.app)
Mindful Application Hidden (/Applications/Mindful.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.0.0.126 - SDK 10.8 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.04 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
GarminGpsControl: Version: 4.0.3.0 Release - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 7 Update 75 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
AdBlock
Facebook Improved
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
GoPro [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Mac OS: Disk size: 998.97 GB Disk used: 146.62 GB
Destinations:
Shenyang [Local]
Total size: 2.00 TB
Total number of backups: 100
Oldest backup: 2013-11-28 05:45:51 +0000
Last backup: 2015-02-20 14:09:49 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 146.62 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% SmartwareServiceApp
1% mds_stores
0% fontd
0% AppleSpell
Top Processes by Memory: ℹ️
2.41 GB Safari
601 MB SmartwareServiceApp
275 MB AntiVirus
172 MB MacKeeper Helper
172 MB ocspd
Virtual Memory Information: ℹ️
9.68 GB Free RAM
4.98 GB Active RAM
1.18 GB Inactive RAM
1.33 GB Wired RAM
1.99 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 20, 2015, 10:03:19 AM Self test - passed
Feb 20, 2015, 08:10:11 AM /Library/Logs/DiagnosticReports/SmartwareServiceApp_2015-02-20-081011_[redacted ].crash
Feb 19, 2015, 08:37:14 PM /Library/Logs/DiagnosticReports/SmartwareServiceApp_2015-02-19-203714_[redacted ].crash
Feb 19, 2015, 10:30:58 AM /Library/Logs/DiagnosticReports/SmartwareServiceApp_2015-02-19-103058_[redacted ].crash
Feb 18, 2015, 10:39:58 AM /Library/Logs/DiagnosticReports/SmartwareServiceApp_2015-02-18-103958_[redacted ].crash
Feb 17, 2015, 08:54:21 PM /Library/Logs/DiagnosticReports/SmartwareServiceApp_2015-02-17-205421_[redacted ].crash
2/20/15 5:42:07.119 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[757]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:42:07.120 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:42:17.125 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[758]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:42:17.125 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:42:27.130 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[759]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:42:27.130 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:42:37.134 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[760]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:42:37.134 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:42:47.138 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[761]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:42:47.138 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:42:57.144 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[762]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:42:57.144 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:43:07.148 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[763]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:43:07.148 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:43:17.152 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[764]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:43:17.152 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:43:27.159 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[765]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:43:27.159 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:43:37.164 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[766]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:43:37.164 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:43:47.170 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[767]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:43:47.170 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:43:57.174 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[768]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:43:57.175 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:44:07.181 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[769]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:44:07.181 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:44:17.185 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[770]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:44:17.185 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:44:27.189 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[771]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:44:27.189 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:44:37.196 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[772]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:44:37.196 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:44:47.200 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[773]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:44:47.200 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:44:57.203 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[774]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:44:57.204 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:45:07.212 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[775]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:45:07.212 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:45:17.219 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[776]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:45:17.219 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:45:27.223 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[777]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:45:27.223 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:45:37.232 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[778]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:45:37.232 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:45:47.237 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[779]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:45:47.238 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:45:57.241 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[780]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:45:57.242 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:46:07.245 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[781]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:46:07.245 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:46:17.250 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[782]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:46:17.251 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:46:27.260 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[783]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:46:27.261 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:46:37.264 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[784]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:46:37.265 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:46:47.272 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[785]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:46:47.272 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:46:57.276 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[786]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:46:57.276 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:47:07.280 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[787]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:47:07.280 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:47:17.284 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[788]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:47:17.284 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:47:27.289 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[789]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:47:27.289 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:47:37.295 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[790]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:47:37.295 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:47:47.299 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[791]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:47:47.299 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:47:57.304 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[792]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:47:57.304 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:48:07.310 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[793]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:48:07.310 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:48:17.314 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[794]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:48:17.314 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:48:27.321 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[795]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:48:27.321 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:48:37.329 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[796]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:48:37.329 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:48:47.339 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[797]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:48:47.339 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:48:49.613 PM com.apple.WebKit.Plugin.64[798]: Failed to connect (colorGridView) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
2/20/15 5:48:49.614 PM com.apple.WebKit.Plugin.64[798]: Failed to connect (view) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
2/20/15 5:48:51.444 PM com.apple.WebKit.Plugin.64[799]: Failed to connect (colorGridView) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
2/20/15 5:48:51.444 PM com.apple.WebKit.Plugin.64[799]: Failed to connect (view) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
2/20/15 5:48:57.345 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[800]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:48:57.345 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:49:07.348 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[801]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:49:07.349 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:49:17.352 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[802]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:49:17.353 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:49:25.607 PM discoveryd[49]: Basic DNSResolver Error 9 on socket - this might be a closed socket
2/20/15 5:49:27.360 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[803]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:49:27.361 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:49:37.365 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[804]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:49:37.365 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:49:47.373 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[805]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:49:47.373 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:49:57.377 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[806]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:49:57.377 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:50:07.382 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[807]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:50:07.382 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:50:17.386 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[808]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:50:17.386 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:50:27.392 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[809]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:50:27.392 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:50:27.907 PM com.apple.WebKit.Plugin.64[810]: Failed to connect (colorGridView) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
2/20/15 5:50:27.908 PM com.apple.WebKit.Plugin.64[810]: Failed to connect (view) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
2/20/15 5:50:37.398 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[811]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:50:37.398 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:50:47.402 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[812]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:50:47.402 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:50:57.406 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[813]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:50:57.406 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:51:07.410 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[814]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:51:07.410 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:51:17.414 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[815]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:51:17.414 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:51:27.418 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[816]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:51:27.418 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:51:37.422 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[817]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:51:37.422 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:51:47.426 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[818]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:51:47.426 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:51:57.430 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[819]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:51:57.430 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:52:06.742 PM Console[820]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.2 instead of 10.10.2. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Call location:
2/20/15 5:52:06.742 PM Console[820]: 0 CarbonCore 0x00007fff85231d9b ___Gestalt_SystemVersion_block_invoke + 113
2/20/15 5:52:06.742 PM Console[820]: 1 libdispatch.dylib 0x00007fff8c5a1c13 _dispatch_client_callout + 8
2/20/15 5:52:06.743 PM Console[820]: 2 libdispatch.dylib 0x00007fff8c5a1b26 dispatch_once_f + 117
2/20/15 5:52:06.743 PM Console[820]: 3 CarbonCore 0x00007fff851da3ca _Gestalt_SystemVersion + 987
2/20/15 5:52:06.743 PM Console[820]: 4 CarbonCore 0x00007fff851d9fb7 Gestalt + 144
2/20/15 5:52:06.743 PM Console[820]: 5 libflavours.dylib 0x000000010c85da63 -[INUtil systemVersionMajor:minor:bugfix:] + 36
2/20/15 5:52:06.743 PM Console[820]: 6 libflavours.dylib 0x000000010c85cdcc __14-[INUtil init]_block_invoke + 121
2/20/15 5:52:06.744 PM Console[820]: FATAL: current OS version (10.10.2) is unsupported by this version of Flavours™. Please check for updates!
2/20/15 5:52:06.832 PM Console[820]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
2/20/15 5:52:07.324 PM flavours.agent[323]: warning: failed to get scripting definition from /Applications/Utilities/Console.app; it may not be scriptable.
2/20/15 5:52:07.324 PM flavours.agent[323]: AppleEvents: Send port for process has no send right, port=( port:17063/0x42a7 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) net.interacto.flavours.INPIDInjectionQueue
2/20/15 5:52:07.325 PM flavours.agent[323]: AppleEvents: Send port for process has no send right, port=( port:17063/0x42a7 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) net.interacto.flavours.INPIDInjectionQueue
2/20/15 5:52:07.435 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[822]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:52:07.435 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:52:17.439 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[826]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:52:17.439 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:52:27.446 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[827]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:52:27.446 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:52:37.449 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[828]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:52:37.450 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:52:47.454 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[829]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:52:47.454 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:52:57.458 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[830]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:52:57.458 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:53:07.462 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[831]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:53:07.462 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:53:17.466 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[832]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:53:17.466 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:53:27.473 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[833]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:53:27.473 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:53:37.478 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[834]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:53:37.478 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:53:47.484 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[835]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:53:47.484 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:53:57.488 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[836]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:53:57.488 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:54:07.492 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[837]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:54:07.492 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:54:10.736 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.736 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.736 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.736 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.736 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.736 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.737 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.737 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.737 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:17.499 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[838]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:54:17.500 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:54:27.505 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[839]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:54:27.505 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:54:37.509 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[840]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:54:37.509 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:54:47.513 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[841]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:54:47.513 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
Similar Messages
-
my macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive froom the old one on the macbook pro and use it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right? but everything else still is in there right. ?
I got my case from owc computing
thye used a cloner last time I got the hard drive from them , but the apple had to be working. and now it's just not going to turn on wine is sticky forget about
no worries I enjoyed it for 6 years could have gone longer I have all this extra gig ram memory, and a new digital drive for ith had broke
all I want it my hard drive available at owc and make it a usb drive and acc3sss my stutt ? thansk any ideas and also on how I could sell or use the parts I can salvage, and yay my new pro ix 17 inches silver sleek full ms office i life and i work. included 389 awesome price , no need for new this does awesome . rather than buying an optical drive for 200.00 I got a new computer to me and better for a lot less.
I am gratefful , just please help on the hard drive question as external ,
thanks
just didnt want to make this sound like a sob sitiuation and also inspire others what can be done.
and I then will be able to upgrade to Snow Leopard and i life 2011.Well as I suspected I love OWC company I pulled out the mac hard drive , they offered me a Macdrive free trial program to check your drive on PC Windows and yesSSSSSSSSSSSSSSSSSSSSSSSS it all there nothing lost
woohooooo , thank you but nothing is dead, when you have faith , this was a prayer answered big time I wanted a pro so much and I get to use my 500 plust 250 plus 120 GB drives all of them
ladies and gentlemen and I get to keep the 2 GB in from my macbook 13 inch and sell all the parts
yipeee
thanks for the support, now the case is Solved. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -
Will my photos taken on my iPad/iPhone automatically store on vice versa is cloud sharing is on? And if the case is it slow?
This FAQ will answer your questions http://support.apple.com/kb/HT4486
Basically, yes. But the photos will be a lower quality then what would be added to your computer's iPhoto or if you are on a Windows machine, the iCloud program needs to be installed to take benefit of this feature. which can be downloaded here : http://support.apple.com/kb/DL1455 -
Phone line fault now infinity is stuck in the slow...
Hello,
I got infinity Installed about 3 weeks ago. BT estimated that I would get around 12Mbit/s however after the install I was sync'ing at 40Mbit/s (the engineers test equipment verified this) and my real world speed test results were usually around 38 Mbit/s on average. This was the case for a couple of weeks.
Then 10 days ago my telephone line developed a fault, I had no dial tone and could neither make or receive any calls. The broadband still worked but had slowed to around 10 Mbit/s and my ping times have increased.
I believe this was because the DSLAM in the cabinet had reduced the speed, because of the bad line conditions, so that it could maintain a working circuit, albeit slow. I logged a call to have the voice service repaired, and it seems to be good now.
However the speed has remained slow, I have spent a long time on the phone to the indian call centres and spoke to some of the ladies in the UK but haven't got much help with the slow speed problem.
I have been told to reboot my router and OpenReach modem more times, carry out more speed tests, place the modem and router facing north-west with some lighted candles, during a full moon, but to no avail.
I have read a lot about profiles and people having exactly the same issues after faults etc. and suggested this to the help desk people but it doesn't compute with them.
What could be wrong here, it was fine until the phone line fault and now is slow, it's hardly a coincidence ?
Can my profile be reset so that the modem will re-train again? Surely if I was to disconnect and a new customer get connected to that port in the cabinet then it would have to re-train, it wouldn't just give them my speed especially if they were to live beside the cabinet?
I have been told everything, you wouldn't believe and BT don't care because it's working.
Any help gratefully received...
** Slight update ** a girl on the help desk earlier said she would increase my upload up to 10 because it was set at 2Mbits/s and now at 00:10 hrs my speed tests reveal that my upload is pulling over 8Mbits/s
So I definately think my downstream should be capable of what I was getting before.
Power Ranger
I.T. / Telecomm's EngineerUpdate.
I had arranged for an OpenReach engineer to call out to my house to have a look at my slow speed issues.
However on the evening before the planned afternoon visit from the engineer, my broadband service has started working normally again. I carried out several speed tests that evening, and indeed it seems to be working at the speed that it used to before my telephone line fault.
Perhaps someone has looked at or reset the profile remotely, but why would they do this now, especially the evening before a scheduled engineer call. If this is the case, they should have done that several weeks ago.
or
Perhaps the DSLAM has done this automatically, by figuring out over a period of time that the line is of good quality now again, and can support faster speeds, and has increased the speed to what is was before my lline fault.
I had been advised by technical support to restart and reset the equipment fairly frequently, early on, however I haven't done this for about a week now, and have just left the equipment alone.
Perhaps the equipment needs to be 'up' without and restarts for the DSLAM to restore the initial speed, or perhaps the it doesn't mind equipment restarts - it still knows the line is good and there is a 'wait' period before it restores the speed again.
Anyhow, since my first line fault, even after the fault was fixed, BT have told me that the initial fault is still open and that more work needs done, I told them the voice part was working ok again.
I looked outside my window this morning and BT contractors are digging up the small aluminium pedestal which contains the connections for the street. I don't mind this, there were faults coming off that small box thing. Hopefully they will replace it with something better.
Hopefully my service will still be working good when I get home this evening, after the work they are doing in the stree, and hopefully I won't have to go round the loop again with slow speeds DOH! -
What is the best full protection case for the iphone 4/s
Can you guys tell me ASAP what is the best full protection iphone 4s case around, i want an all around protection case like lifeproof, i have hesard they are bad cases is that true.
Is it that easy to restore the iphone even if I have a pin?
I think it's a shame with all the tecnology with have we can't some how stop the phone from working if it ever gets stolen.
I think the best route to go down is to get it insured
Thanks for you help -
The slow loading is unbearable
Recently I have found that whenever I go to the "Apple Discussions" page & then to any of the forums it takes forever for the page to load! Like right now it took 20-30 seconds to load the "discussions" page & 30-40 seconds to load this forum's page. I have a 5megabit cable connection & I don't think there is any problem there since I can load other pages very, very fast including the Apple Store & other Apple sites. Could this problem be an overload of the discussions servers or does anyone have any suggestions as to what it may be or what I can do to resolve this. The situation makes using the forums very frustrating.
So I just posted the message below on the MacWorld website feedback.Maybe they will do something??
Until the press puts some pressure on Apple to fix their "Apple Discussions" site there will be no improvement in making it useable again. It is so slow now it is basically unuseable. To read about the problem check this forum>>>>>http://discussions.apple.com/forum.jspa?forumID=1076&start=0<<<. I would love to see Macworld bring this to the attention of the entire Mac community & apply some pressure on Apple to fix the problem.
HarrisThere's nothing to be gained by "applying pressure" from any outside agency, for they will already be under a tremendous amount of pressure to resolve whatever issues they may be having.
I can't agree with this idea. "They" are the 'in the trenches' people actually doing the work & are no doubt doing everything in their power to resolve the issues as quickly & professionally as possible, with or without outside pressure. However, they are limited by the resources the corporation makes available to them & it is at this level that outside pressure can make a difference.
This latest round of upgrades to Discussions has obviously been a major one, & it is taking an unprecedented amount of time to get the bugs out -- weeks instead of days. So clearly, Apple has not allocated enough resources to make the changes in a smooth, timely manner.
Pressure from the bottom up (IOW, from the lower sections of an organizational chart to the upper ones) isn't noted for its effectiveness in rectifying this kind of problem. This is true not just for Apple but for any entity so structured, be it a corporation, a military unit, or whatever. Top down pressure gets far better results (for what I hope are obvious reasons) & there is no better way to instigate this than by pressure from outside the organization, in this case from the users & stockholders the top tiers of the organization must keep happy if the organization is to remain successful.
IOW, it is not effective to rant here about the problems (but of course it is useful to delineate them). It is often very effective to rant (a bit) about them in other forums of public opinion. The squeaky wheel gets the grease, but it has to be heard to be noticed. -
Known issue : Bad CASE definition files?
Hey guys,
Surprised there isn't a topic on this already.
Since early this morning I have noticed almost all of our e-mails being dropped by CASE - customer e-mails, test e-mails, basically everything externally coming in.
Called Cisco support and apparently they have had a 6-7 tickets with customers complaining about the same thing.
Until that happens, I have change positively identified spam = quarantine instead of dropping.
I suspect a bad CASE definitions file - typo in the regex probably ;)This should have been pushed and corrected. Please run 'antispamupdate ironport force' from the CLI on the appliance(s), and assure that you are seeing a current time stamp on the rules.
This would have affected 8.5+ revisions, from the information I was provided earlier today.
Current as of my lab:
Component Last Update Version
CASE Core Files 05 Jun 2014 04:40 (GMT +00:00) 3.3.1-009
CASE Utilities 05 Jun 2014 04:40 (GMT +00:00) 3.3.1-009
Structural Rules 05 Jun 2014 04:40 (GMT +00:00) 3.3.1-009-20140603_185702
Web Reputation DB 05 Jun 2014 04:40 (GMT +00:00) 20140604_091141
Web Reputation DB Update 05 Jun 2014 04:40 (GMT +00:00) 20140604_091141-20140605_022926
Content Rules 05 Jun 2014 04:40 (GMT +00:00) 20140605_025357
Content Rules Update 05 Jun 2014 04:40 (GMT +00:00) 20140605_025422
Let me know if you are still seeing persisting issues.
-Robert -
MIFI4620LE Jetpack blinking amber light--does this mean the battery is bad? Should the unit operate without the battery installed if plugged in?
The MIFI4620LE Jetpack does not work without a battery installed, even when connected to an external power supply.
I personally think that was a dumb design. I would think the unit would use more electricity when continually charging the battery than just powering the unit it's self, but that's the way Novatel made them.
If your Jetpack works with the battery installed and connected to an external power supply, but does not power on with power supply disconnected, I would say that the battery is defective or worn out.
You should be able to go to a nearby Verizon Store and have them either test the battery or put a new one in it to see if it works. Then you will know if you need to spend the $$ for a new battery. OR if you always use your Jetpack at home, or in your car, just use the old battery connect to a power supply or your cigarette lighter and save the cash.
As the Customer Support person stated, the slow blinking amber light is a normal state when the Jetpack is turned on and connected to Verizon's service.
I hope this solves your problem. -
IPhone 4, Flip leather case and the 'Compass' app..just some info
Hello Members, and anyone new to the iPhone 4 with a 'Flip' type case that has a magnetic clasp.
I had just got my new Iphone 4, and after fully updating it to iOS 4.1, I'd successfully managed to fix the screen protector that came with the all 'leather' flip case, and proceeded to slide the Iphone into it's new luxury coat closing it securely.
Leaving it while, and then coming back to my Iphone, I started to explore the device and went straight for the 'compass' app, just to see it working....
I notice it wasn't operating correctly, the app would either be really difficult to calibrate, and when it did, the pointer would not be stable and jerked around a lot.
Anyway...I found the 'flip' case to have been a bad choice purely because of a design flaw, see the phone kept wanting to slide out as I would use it, so off I went to buy another one.
I settled for one which was made of plastic, it was a black 'enclosure' type and even included the screen protector built into it, so no having to mess about with sticky thin films either..great, just snap the two half's together...job done!
Again, back at home and in the same location, I again started to explore the iPhone going from browser to app, and again fell back onto the 'compass' application, only this time it worked flawlessly, no having to 'calibrate' and re-calibrate, no jerking from the pointer, it worked smoothly and faultlessly, and then it had occurred to me as to why this might be.....?
The Iphone's directional tech is influenced by magnetic fields, regardless of whether it's 'geographic' north or 'magnetic' north, and was being influenced by the magnet that was contained in the clasp of the leather 'flip' case, I new this could only be the possible reasoning, as I'd been trying to get the 'app' to work all the time even when I'd crossed my local park while still in the 'flip' case on my way to the store, with always the same bad results, it was only when the Iphone was in it's new case did the compass app work correctly.
So, just a consideration to any new users of the iPhone 4, that's using a case that's got any kind of magnet, and that's having the same issues that I suffered, remember to 'calibrate' and try the 'compass' application out of these type's of case's before thinking there's a software problem, or fault with your Iphone4.
Kind regards
LivioFigured it out! Compass Calibration was off in Settings - Location Services
-
Bad case of CRS - Lost interface demo
I have a bad case of CRS 'Cannot Remember Stuff'
I have seen a user interface that acts like one of those
SPINNING Order gizmos you may have seen in your local diner.
The Wheel with hooks, spins the customer paper order to the
Cook....
In the sample I saw.... the gizmo spun left or right and when
you clicked on one of the order or hanging objects of focus they
would ZOOM out to you as if using a magnifing glass...
Not sure if I am very clear but any suggestions for a URL
would help...
PC
The component could have been..
Adobe FLEX/Flash
SWISHmax?Search the forums for carousel or ferris wheel. kglad has
posted some code that does most of what you are mentioning. I don't
think it had the zooming, but that should just be easy. Right?
:) -
User exit or BADI available for the CAPP in CA03.
Hi,
I have a requirement to populate the standard CAPP values to the work center activities of the routing only when all the activities are having a blank value.Please see the below paragraph for better understanding.
Currently in SAP when executing CAPP for a work center of the routing it over writes the existing values populated on the routing for the setup,labor,standard labor,man occupation,machine occupation etc whether the values are blank or not. An enhancement needs to be made to only populate operations standards when all the values are blank.
If routing is not populated with setup, machine, labor standards, man occupation, machine occupation and work center is setup for default standards in CAPP, then run the CAPP process to apply standards from work center zcappstds table. The program that is run to apply these standards currently is SAPLCETO. Potentially ca96 and the batch process that updates the material master RCPMAU01 will have to be adjusted as well.
Please help me if anybody knows the user exit/Badi for this requirement.Please reply me soon this is an urgent requirement
thanks in advance,
Samyuktha.I dont have details abt exact user Exit or badi which will suit ur requirement. But below info will give you the way to find out the same.
Have a look at below link,
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
Best Regards,
Vibha
*Please mark all the helpful answers -
The Case of the Disappearing Clones
Ok, here's a new one for me.
I was cloning a cloud edge, and examining my work. The History palette was blocking my view, so I moved it. Instead, it jumped to the palette bar. Brought it back and tried to move it again. Same thing. Huh? I opened it for the third time, carefully clicked on the top of the History and this time it moved off the edge of the image. But look! The clones have disappeared from the image, but they are still present in the palette! I ran back and forth up History and nothing. There they are in History, there they aren't on the image. Not a big deal, redo the clones. Looks better than before anyway, but still, where are the first ones?
(Yeah, I know. Dual monitors and all that. But consider if I have dual monitors, this puzzle never would have appeared! Or would they?)
Win7 64, CS5 with all the patches.
Oh, and Happy New Year.Thanks for getting back Noel.With a name like yours, tis the season!
Last first. Nothing wrong with dual monitors except for my cramped desk space. I probably will change that as soon as any of my potential clients actually materializes. Been quite slow!
So far as screen shots and such, it would have been nice had I anticipated this event, but there it was and I had to write down what I could recall as to the steps leading up to the event. Saving it would lose history so I proceeded rather slowly to try and glean whatever I could.
Now, a variation on this occurred about an hour later. This time I was using the Burn Dodge tool. I flattened the file first, then proceeded to use the tool, and suddenly noticed that nothing happened when a went backwards through history, as if I didn't actually burn anything. The setting for the brush looked ok, and then I noticed that the file is no longer flattened! WTF! I was deliberate in doing so, and even if I went back to before flattening in History, flattened should be visible and available as I drop down through History. According to History, I never flattened it. This could also be the case in the first instance. I thought I had flattened it but it wasn't. I assumed I didn't flatten.
At this point, I have to consider that a prefs reset is adviseable, but before doing that, I really want to see if I can replicate either event. So far, no dice.
I checked the History setup to see if non-linear History was checked and it isn't. But it sure seems like it is.
One unusual condition is that last night, before going out for New Years, I saved my work but left PS running with the file open. So, this morning, I proceeded to do the little detail work on the open file as I intended to run some test prints.
That's when it all started.
Note: as I am writing this, I'm also checking out the app. I just tried to open PS. The icon in the tray showed PS is not running, but I cannot open it. The executable doesn't run. I've seen this before in Win7 and I usually open Task Manager and shut down the program. I see this on any number of programs, like even Fire Fox. But this time I noticed two versions of PS running. I didn't think this was possible. One shows a large memory component 670,000k, the other about 6,000k. Huh? I shut down the smaller one and get a message that this is an illegal action, but it shuts down anyway.(That notice lasted only seconds and went away.) I try again, I again see the second version in Processes, the same 6000k memory size. Now it shuts down with no notice. I know I saved the file and did tell PS to exit, so I shut down both instances of PS. Now it opens correctly.
I'm of a mind that there is some corruption going on.The fact that programs won't close when I exit does bother me. ( I'd hate to think about reinstalling the whole shootin' match!) What I will do is enable the History log. and see if I can capture any information. -
[svn:fx-trunk] 7743: Moving away from using namespace qualifiers in most cases in the SDK.
Revision: 7743
Author: [email protected]
Date: 2009-06-11 06:53:10 -0700 (Thu, 11 Jun 2009)
Log Message:
Moving away from using namespace qualifiers in most cases in the SDK. We've run into a few cases now where the use of qualifiers in code that is called excessively can slow things down.
Bugs: SDK-21337
Reviewer: Ryan, Paul
QE Notes: None
Tests: Ran several random Mustella test groups, checkintests.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-21337
Modified Paths:
flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/FlexNativeMenu.as
flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/HTML.as
flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/fileSystemClasses/FileSys temDataGridNameColumnRenderer.as
flex/sdk/trunk/frameworks/projects/airframework/src/mx/managers/WindowedSystemChildrenLis t.as
flex/sdk/trunk/frameworks/projects/airframework/src/mx/managers/WindowedSystemRawChildren List.as
flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/Window.as
flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/WindowedApplication. as
flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/windowClasses/TitleB ar.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/Application.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/ButtonBarButton.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/DataGroup.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/DropDownList.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/Group.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/RadioButton.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/RadioButtonGroup.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/SkinnableContainer.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/VideoPlayer.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/DropDownCont roller.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/ItemRenderer .as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/ListBase.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/SkinnableCom ponent.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/Slider.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/core/SpriteVisualElement.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/AddAction.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/AnimateTransform.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/MotionPath.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AddActionInstan ce.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AnimateTransfor mInstance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/RemoveActionIns tance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/SetActionInstan ce.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/primitives/supportClasses/GraphicEleme nt.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/skins/default/ErrorSkin.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/skins/default/FocusSkin.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/ModifiedCollectionView.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Form.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/FormItem.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/GridRow.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HDividedBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TitleWindow.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/utilityClasses/CanvasLayou t.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/utilityClasses/ConstraintC olumn.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/utilityClasses/ConstraintR ow.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/PopUpButton.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Tree.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridItem Renderer.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/ListBase.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/textClasses/TextRange.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/treeClasses/DefaultDataDescr iptor.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/treeClasses/HierarchicalColl ectionView.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/Application.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/Container.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponentGlobals.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/AddChildAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/CompositeEffect.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Dissolve.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Effect.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/EffectInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/EffectManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/MaskEffect.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/ActionEffectIns tance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/AddChildActionI nstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/AnimateProperty Instance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/CompositeEffect Instance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/DissolveInstanc e.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/FadeInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/MaskEffectInsta nce.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/MoveInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/RemoveChildActi onInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/SetPropertyActi onInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/SetStyleActionI nstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/SoundEffectInst ance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/TweenEffectInst ance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/ZoomInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/formatters/DateFormatter.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/GradientBase.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/GradientStroke.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/LinearGradient.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/RadialGradient.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/RadialGradientStroke.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/InitLocalConnection.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/MainLocalConnection.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemChildrenList.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemRawChildrenList.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/dragClasses/DragProxy.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/marshalClasses/MarshalPopUpD ata.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/systemClasses/MarshallPlan.a s
flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/resources/ResourceBundle.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/resources/ResourceManagerImpl.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/DateChooserIndicator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PanelSkin.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PopUpButtonSkin.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PopUpIcon.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PopUpMenuIcon.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/SwatchSkin.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/states/RemoveChild.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/CSSStyleDeclaration.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/StyleProtoChain.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/LoaderUtil.as
flex/sdk/trunk/frameworks/projects/framework_textLayout/src/mx/controls/dataGridClasses/T LFDataGridItemRenderer.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/remoting/Operation.as
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleModule.vmRevision: 7743
Author: [email protected]
Date: 2009-06-11 06:53:10 -0700 (Thu, 11 Jun 2009)
Log Message:
Moving away from using namespace qualifiers in most cases in the SDK. We've run into a few cases now where the use of qualifiers in code that is called excessively can slow things down.
Bugs: SDK-21337
Reviewer: Ryan, Paul
QE Notes: None
Tests: Ran several random Mustella test groups, checkintests.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-21337
Modified Paths:
flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/FlexNativeMenu.as
flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/HTML.as
flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/fileSystemClasses/FileSys temDataGridNameColumnRenderer.as
flex/sdk/trunk/frameworks/projects/airframework/src/mx/managers/WindowedSystemChildrenLis t.as
flex/sdk/trunk/frameworks/projects/airframework/src/mx/managers/WindowedSystemRawChildren List.as
flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/Window.as
flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/WindowedApplication. as
flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/windowClasses/TitleB ar.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/Application.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/ButtonBarButton.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/DataGroup.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/DropDownList.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/Group.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/RadioButton.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/RadioButtonGroup.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/SkinnableContainer.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/VideoPlayer.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/DropDownCont roller.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/ItemRenderer .as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/ListBase.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/SkinnableCom ponent.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/components/supportClasses/Slider.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/core/SpriteVisualElement.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/AddAction.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/AnimateTransform.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/MotionPath.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AddActionInstan ce.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AnimateTransfor mInstance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/RemoveActionIns tance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/SetActionInstan ce.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/primitives/supportClasses/GraphicEleme nt.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/skins/default/ErrorSkin.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/skins/default/FocusSkin.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/ModifiedCollectionView.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Form.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/FormItem.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/GridRow.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HDividedBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TitleWindow.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/utilityClasses/CanvasLayou t.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/utilityClasses/ConstraintC olumn.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/utilityClasses/ConstraintR ow.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/PopUpButton.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Tree.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridItem Renderer.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/ListBase.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/textClasses/TextRange.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/treeClasses/DefaultDataDescr iptor.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/treeClasses/HierarchicalColl ectionView.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/Application.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/Container.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponentGlobals.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/AddChildAction.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/CompositeEffect.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Dissolve.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Effect.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/EffectInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/EffectManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/MaskEffect.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/ActionEffectIns tance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/AddChildActionI nstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/AnimateProperty Instance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/CompositeEffect Instance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/DissolveInstanc e.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/FadeInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/MaskEffectInsta nce.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/MoveInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/RemoveChildActi onInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/SetPropertyActi onInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/SetStyleActionI nstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/SoundEffectInst ance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/TweenEffectInst ance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/ZoomInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/formatters/DateFormatter.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/GradientBase.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/GradientStroke.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/LinearGradient.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/RadialGradient.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/RadialGradientStroke.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/InitLocalConnection.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/MainLocalConnection.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemChildrenList.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemRawChildrenList.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/dragClasses/DragProxy.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/marshalClasses/MarshalPopUpD ata.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/systemClasses/MarshallPlan.a s
flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/resources/ResourceBundle.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/resources/ResourceManagerImpl.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/DateChooserIndicator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PanelSkin.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PopUpButtonSkin.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PopUpIcon.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/PopUpMenuIcon.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/skins/halo/SwatchSkin.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/states/RemoveChild.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/CSSStyleDeclaration.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/StyleProtoChain.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/LoaderUtil.as
flex/sdk/trunk/frameworks/projects/framework_textLayout/src/mx/controls/dataGridClasses/T LFDataGridItemRenderer.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/remoting/Operation.as
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleModule.vm -
BADI's for the MD04 Transaction ?
Hello All ,
I want to know the BADI's for the MD04 Transaction.
I want to incorporate one Custom-Authorization Object in this Transaction.
Is it Posible ?
If yes can anyone help me out ?`
Regards,
Deepu.KThere are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
Also have a look at below report which will list BADIs.
*& Report ZNEGI16 *
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers -
Real time effex in iLife 6 slow my video down not bad but some what slow.
Real time effex in iLife 6 slow my video down not bad but some what slow. When I go to try out different effects it makes my prevue slow as I am looking at it in real time seeing what the effect looked like. I am using a i Mac G5 250gb and 1g of ram. Is there something rong are is this the way the i Mac G5 works with video thanks.
Be sure you're using the latest drivers for your Decklink...
If you didn't perform a totally clean install of the studio 2 when you got it, that might help. It's always been my habit to rebuild my startup disk any time a new OS comes out (i.e. Panther to Tiger) and when a new studio is released... I just have a very stable system as are the ones I watch after. I'm totally convinced this needs to be done periodically. At the school I teach at part time, there are about 65 FCP bays. They do this totally clean install every single semester. I'm convinced that this is the reason they are so stable in general, even being used by many user accounts etc...and by novice users to boot.
Also keep in mind that as drives get fuller, they get slower... so need to keep at least 10% free... they actually start slowing down at 70% capacity. As a side note, CalDigit's new HD PRO unit is stripped in such a manner that it doesn't slow down as it fills up... Apparently they stripe it so that every other drive is using the fastest part of the platters and the others start by using the slowest part of the platters or some such...
Jerry
Maybe you are looking for
-
Connect macbook pro with iphone 5 via bluetooth
I have macbook pro and Iphone 5 both have bluetooth turned on. When I go in to Macbook Pro I can see my Iphone 5. When I go into my Iphone 5 it shows as discoverable and searching.....What am I doing wrong? The Macbook won't connect and sync with Iph
-
The export file from a calc script - naming and date/time stamp
Here is a simple calc script to export data. 2 questions: 1. Is there an easy way to add a date/time stamp on the name of the data file so that it does not overwrite the older ones every time? 2. I tried to specify the path so that it write to anothe
-
Invoking ODI Scenario from BPEL
Hi, I tried invoking a scenario from BPEL. I started the agent before invoking the scenario. However I am getting the following error in the Agent java.lang.NullPointerException at com.sunopsis.dwg.dbobj.SnpScen.getObjectLst(SnpScen.java) at com.suno
-
Open a pdf with out print or save button
Hello, Is there any way to open pdf with out using save or print and also make other users to not to open the file. thanks
-
Help In Paginating Query output
Hi All, I have a query which fetches 80000 records at one short. This fetching can be controlled by using the search criteria. But some times it needs to fetch all the records and populate on the screen. The query fetches and populates more than 50 c