Bad Case Review
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=9DF 6080&nplm=TN609LL/A
The Belkin sport armband. I bought this from the apple online store. It got here. I put my iPhone in it and go for a 3 mile run. I'm able to operate the phone just fine through the plastic covering.
When my run is over, I reach over to unattach the case from my arm, and my phone is partially hanging out. Turns out the plastic front is GLUED onto the outside of the case. What a hunk of junk. One use and it almost cost me my phone.
Thanks for the warning
Similar Messages
-
Known issue : Bad CASE definition files?
Hey guys,
Surprised there isn't a topic on this already.
Since early this morning I have noticed almost all of our e-mails being dropped by CASE - customer e-mails, test e-mails, basically everything externally coming in.
Called Cisco support and apparently they have had a 6-7 tickets with customers complaining about the same thing.
Until that happens, I have change positively identified spam = quarantine instead of dropping.
I suspect a bad CASE definitions file - typo in the regex probably ;)This should have been pushed and corrected. Please run 'antispamupdate ironport force' from the CLI on the appliance(s), and assure that you are seeing a current time stamp on the rules.
This would have affected 8.5+ revisions, from the information I was provided earlier today.
Current as of my lab:
Component Last Update Version
CASE Core Files 05 Jun 2014 04:40 (GMT +00:00) 3.3.1-009
CASE Utilities 05 Jun 2014 04:40 (GMT +00:00) 3.3.1-009
Structural Rules 05 Jun 2014 04:40 (GMT +00:00) 3.3.1-009-20140603_185702
Web Reputation DB 05 Jun 2014 04:40 (GMT +00:00) 20140604_091141
Web Reputation DB Update 05 Jun 2014 04:40 (GMT +00:00) 20140604_091141-20140605_022926
Content Rules 05 Jun 2014 04:40 (GMT +00:00) 20140605_025357
Content Rules Update 05 Jun 2014 04:40 (GMT +00:00) 20140605_025422
Let me know if you are still seeing persisting issues.
-Robert -
Bad case of CRS - Lost interface demo
I have a bad case of CRS 'Cannot Remember Stuff'
I have seen a user interface that acts like one of those
SPINNING Order gizmos you may have seen in your local diner.
The Wheel with hooks, spins the customer paper order to the
Cook....
In the sample I saw.... the gizmo spun left or right and when
you clicked on one of the order or hanging objects of focus they
would ZOOM out to you as if using a magnifing glass...
Not sure if I am very clear but any suggestions for a URL
would help...
PC
The component could have been..
Adobe FLEX/Flash
SWISHmax?Search the forums for carousel or ferris wheel. kglad has
posted some code that does most of what you are mentioning. I don't
think it had the zooming, but that should just be easy. Right?
:) -
BAdI code review - for perfomance improvements
Hi,
I've a BAdI implementation to enhance a BW datasource which will extract additional fields for the datasource. The pseudo code for the extractor is as below. Can some one please review and let me know the opportunities (which I'm sure there will be) to improve the performance of the BAdI?
Thanks a lot.
Regards,
Sri.
Pseudo Code:
loop at ct_data assigning <ls_data>.
case <on_a_field>.
when <value_1>.
if <condition1>.
elseif<condition2>.
elseif<condition3>.
endif.
when <value_2>.
<execute a function module by exporting value_2>
if <condition1>.
elseif<condition2>.
elseif<condition3>.
endif.
endcase.
<extraction logic for other fields continue>
endloop.Hi
Two suggestions:
First, use tcode ST05 to do traces and diagnose the bottleneck.
Second, tcode ABAP_TRACE, go to tips and tricks, and in internal tables / using the assigning command see samples and run them to evaluate the times. But in my opinion you are doing well.
I hope this helps you
Regards
Eduardo -
Just picked up a black InCase from the Apple store today (TN563LL/A).
I am very pleased with it. I thought that since it was rubber it would be kinda sticky feeling (perhaps I'm comparing it with the silicone ones) and grab lint like no tomorrow. It's not bad on the lint thing - and it's been laying on my fuzzy blanket. It seems to remove any lint with a wipe with a lint-free cloth.
I'm especially pleased with the fit. It has holes for the headphone jack, the USB connector (won't fit in a dock without being removed), the speaker and mic, camera, and the silence slider, but the volume and on/off/sleep buttons are covered. I prefer the fact it doesn't try to cover the glass at all. It doesn't interfere with use at all, or any of the sensors. I'm much less worried about the glass than the chrome and the backing at this point (from the stress tests we've seen), and this 1mm or so of lift should help if it lands face down so it doesn't hit grit on the ground (though I splatted mine on the garage floor the other day with no damage).
I'm testing the heat retention right now. I didn't have any problems with music, so I'm running a movie now.
It will definitely keep it from sliding, and other than being harder to slide in and out it still fits in the side cell phone bag on my purse. Hopefully if I accidentally drop it on the corner it will take some of the shock, too.
No belt clip, but that's not the way I function.
My two cents. I'm still waiting for what Vaja has to come out with that's not magnetic, and I'm interested in possibly trying Lajo's Exo L with swivel clip so it acts both as a horizontal and vertical stand, but for now this is just about perfect for me.
My two cents,
AymI've noticed the stretching as well. If you do buy this case (and frankly, it's a fine case) then leave the iPhone in. I removed mine frequently for cleaning and the rubber has stretched.
I was looking at the Speck ToughSkin, but it looks a little too...knobby. I just ordered the iSkin Revo for the iPhone, which looks to have everything I want in a case except for a belt clip. I currently use the Contour iSee for the iPhone and I'd like to see what the Showcase for the iPhone will be like. I like clip-able cases as my phone is on vibrate most of the time and I often miss alerts/calls when it's in my pocket, but I also worry about knocking it off my hip somehow, or walking around with it out for all to see, screaming "Hey I'm a $500 phone, why not steal me?"
Is it just me or the iPhone causing people to seemingly collect cases? I've gone through three including the Crystal Jacket Set I returned. -
I was given an early Christmas gift -- my very first iPod (G5, 30GB). Of course, after reading so much here about the necessity of having a case, I looked around online for something I thought I'd like and that would do the job, and I settled on the Sena iPod Video Dockable 30GB (it's also available in 60GB size) -- in magenta, since it's pretty. It's available in a variety of colors.
One reason I chose this was that I've had a Sena case for my Palm for a few years now, and it looks as good now as it did when it was new; the leather is good quality and ages beautifully. This new iPod case seems to be of the same quality and adds very little to the size of the iPod. It has a pocket in the flip cover, closes with convenient magnetic catches, and has screen protection built in. There's no protection for the click wheel, but I'm not sure that's absolutely essential.
As for usability, the case has a cut-out for the earphone jack, and there's another cutout in the bottom for plugging in the USB cable. The hold button is covered when the flap is closed, but it's easily accessible with the flap open -- this will prevent accidentally turning the button on or off. There is a removable belt clip, which will be handy if you don't want to put the iPod into a pocket.
As for cost, I was lucky in that I pre-ordered the case while it was still priced at $40; it's now $45 and apparently will be going up sometime in the future.
This is just MHO, and I have NAYY with Sena, other than as a satisfied customer. HTH someone.Thanks for that!
I've only tried the Incase Nano Case. It's got an LCD protector and is quite cushioned. If you're a perfectionist I'd not recommend it though, it's got a (as said in the reviews) tight hold spot (hard to reach) and it's misaligned: the scroll wheel is slightly covered so it's hard to start over a song, turn up/down the volume, etc. So summary:
Pros
Nice look (kinda like a wallet)
Nice material
It's got a nifty spot for credit cards, IDs, money, etc.
It's got a nice LCD protector (plastic so that it won't scratch the iPod)
Cons
Doesn't align well with the scrollwheel
Some people said they can't access the hold button (I don't mind though because I just put it on sleep when I stop using it)
The iPod is kinda loose when in the case (it won't fall out, but almost)
Just another opinion. -
ZCover cases (review with pics)
I received my zCover nano cases today. Initial impression. Not perfect by any means. C+.
First the basics...
You get two cases with your order ($24.95). One with an open bottom and one with a lanyard and flip bottom with headphone access. You also get a hard plastic screen cover which slips in behind the silicone case making a nice snug fit.
http://img147.imageshack.us/my.php?image=everything6tl.jpg
Screen coverage...
This is the best part. It's a hard plastic piece with little feet that raises it above the screen ever so slightly. I assume the feet are to prevent rubbing and thus scratching the screen as much. Very durable with a sharp and clear view of the screen. There is no distortion at all.
http://img147.imageshack.us/my.php?image=screenbklan3xf.jpg
Material...
This is where the problems start. It's very very rubbery. I know... it's silicone... duh. In certain circumstances your nano might bounce if dropped (a little levity never hurts). I think the material is a little too thick. Although my two cases seem to be slightly different in thickness from one another. Perhaps a quality control issue? One operates much easier than the other (more on that subject later). I chose the black one. It seems to attract lint a bit. Not horribly but there are a few fuzzy white things living on the case that need to brushed off quite regularly. Perhaps other colors would be more friendly in the lint department.
Operation of nano with case...
Hold button. Okay, this is the biggest problem. The hold button on top is covered completely. It was impossible to move it on the one case so I had to cut a hole in the top to access it. On the other case it was possible to move but very difficult. I have long nails and struggled every time to move it. I can't imagine anyone without nails being able to move it without cutting a hole in the top.
Click wheel movement. Same problem. The silicone is not noticeably thinner over the wheel. You have to press much harder than normal to make it function. It does work though. Once again the one case was much easier to work than the other but still slightly harder than a naked nano.
http://img147.imageshack.us/my.php?image=top5jh.jpg
http://img147.imageshack.us/my.php?image=bottom7iw.jpg
Conclusions...
If you are looking for something that is available now and completely covers every inch of your nano this case does meet those qualifications. This will not be my everyday case. I'd use this case if doing something grubby outside. Hiking, gardening, car repair, etc. It's well protected. It would not slide off many surfaces and has grips on the sides. The lanyard is iffy. It looks like a long shoelace. I'm wondering how long it would take to break off of it's connection to the case. It only has a tiny string attaching it to a rubber loop which is part of the case itself. I would feel the need to reinforce it's connection before freely using it.
http://img147.imageshack.us/my.php?image=lanyard7ye.jpgThanks for the review. I was ready to order one until I saw this! I guess I'll just have to wait until the iSkin Duo comes out, or the Speck SkinTight.
-
Sad iPad 2 Story (Dead Pixel + Bad Case)
Guys,
I want to share this experience so that you may not end up like me. I will try to shorten the story, please bear with me.
Just last 10/25, my iPad 2 arrived, I knew that it had arrived because I was informed via sms by my mother who received the unit. (Delivered to the house).
Excited, I bought this case (http://capdase.com/minisite/ipad/en/...28&c3=28&id=96), and when I got home, with utmost care, after removing the plastic, I immediately placed the screen protector then insert the iPad in the case.
The next morning, I find my iPad screen a bit warmer in color... I noticed it immediately given the number of iPads I have used at the office, friends and actually this is our second iPad 2.
After a few days, I now noticed a dead pixel, long story short, I investigated, tested, and I believe I now have a dead red "sub-pixel". This is less than a week in use.
I emailed the store where I got this (from a promo) and I reported the screen to be a bit warmer (yellowish) and the dead sub pixel, they told me to bring the unit over so I did.
They have confirmed a dead red sub-pixel (based on wikipedia and apple) after I demonstrated that a pixel is "black" on red (wallpaper) and not on blue and green. (FYI LCD's are RGB's). They told me a replacement will be ordered in a week's time. I was so happy, because I can't stand a dead subpixel that is on the middle of the screen.
Today was the 7th day and the same day where I supposedly to surrender my defective unit, to my shock, surprise, they told me the unit have dents! I can't believe what I am hearing! The iPad never left the case from the day it went in there!
For illustration purposes, this is where they saw two (2) dents.
(approximate location)
Because of the dents, they did not replace my unit, I have no choice but to surrender the iPad so that their main office will decide if this is still fit for replacement. OR just live with it (dead pixel) which is not also a choice for me.
My question is on what occasion did my iPad got the dents... obviously the Capdase case did not do its job. Or I was sold a dead pixel dented iPad 2.
If you are planning to buy this case, DO NOT BUY IT!!! If you have this case already, sell it! Buy a new one! Preferably cases which protects the entire border.
I went home today iPad-less. Sad, frustrated, unknown what will be the fate on Monday next week, the day they will tell me congratulations, you will get a new iPad or, Sorry, we cannot accept your dead pixel ed dented iPad 2.
All this drama, in just 2 weeks and 2 days.
I hope they will still replace it next weekI don't know if there will be any iPad repair DIY gurus on this discussion site a but in case you get no other responses, you might be able to find some help here.
http://www.ifixit.com/iPad-Parts -
Problem description:
iMac has slowed considerably recently, especially in Safari. Scrolling pages is jumpy and sticky, I can out-type the keyboard easily and the spinning beachball seems to be my constant companion.
I had the same issue a couple months ago so I maxed out the RAM, cleaned up the caches and log files and pruned most of the cookies and other crap from Safari. Of course they come right back when you visit sites again.
Seems like the hard drive is accessing a lot more, too, even when I’m not doing anything. The first drive I had died and this is a replacement drive.
EtreCheck version: 2.1.8 (121)
Report generated February 20, 2015 at 10:11:54 AM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2010) (Technical Specifications)
iMac - model: iMac11,2
1 3.6 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 5670 - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:6:53
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Mac OS (disk1) / : 998.97 GB (852.36 GB free)
Core Storage: disk0s2 999.35 GB Online
HL-DT-STDVDRW GA32N
USB Information: ℹ️
American Power Conversion Back-UPS BR1500G FW:865.L2 .D USB FW:L2
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Firewire Information: ℹ️
Seagate FA GoFlex Desk 800mbit - 800mbit max
disk2s1 (disk2s1) <not mounted> : 32 KB
Shenyang (disk2s3) /Volumes/Shenyang : 2.00 TB (1.80 TB free)
WD My Book 111D 800mbit - 800mbit max
disk3s1 (disk3s1) <not mounted> : 32 KB
My Book (disk3s3) /Volumes/My Book 34 : 2.00 TB (1.78 TB free)
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Library/Application Support/MacKeeper/AntiVirus.app
[not loaded] net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) [Click for support]
[loaded] net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) [Click for support]
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4234 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] com.Belcarra.iokit.USBLAN_netpart (3.1.1 - SDK 10.6) [Click for support]
[not loaded] com.Belcarra.iokit.USBLAN_usbpart (3.1.1 - SDK 10.6) [Click for support]
[not loaded] com.RemoteControl.USBLAN.usbpart (3.1.1 - SDK 10.7) [Click for support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) [Click for support]
[not loaded] com.wdc.driver.1394HP (1.0.9) [Click for support]
[loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.11) [Click for support]
[not loaded] com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) [Click for support]
[loaded] ng.uds.netusb.controller (1.0.0d1) [Click for support]
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_netpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.netpart.panther (1.6.3) [Click for support]
/System/Library/Extensions/2.2.0/Belcarra.USBLAN_usbpart.kext/Contents/Plug-Ins
[not loaded] com.belcarra.iokit.usbpart.panther (1.6.3) [Click for support]
/System/Library/Extensions/2.2.0/RemoteControl.USBLAN_usbpart.kext/Contents/Plu g-Ins
[not loaded] com.RemoteControl.USBLAN.panther (1.6.2) [Click for support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) [Click for support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) [Click for support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) [Click for support]
Startup Items: ℹ️
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist [Click for support]
[running] com.amazon.sendtokindle.launcher.plist [Click for support]
[running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Click for support]
[loaded] com.epson.esua.launcher.plist [Click for support]
[running] com.epson.eventmanager.agent.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.seagate.SeagateStorageGauge.plist [Click for support]
[running] com.wdc.raidmanagerstatusmenu.plist [Click for support]
[running] net.interacto.flavours.agent.plist [Click for support]
[loaded] net.interacto.flavours.bg.plist [Click for support]
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.wdc.SmartwareDriveService.plist [Click for support]
[running] com.wdc.WDRAIDDriveService.plist [Click for support]
[running] com.wdc.WDSmartWareService.plist [Click for support]
[running] com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist [Click for support]
[loaded] net.interacto.flavours.helper.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.mlbam.nexdef.plist [Click for support] [Click for details]
[loaded] com.spotify.webhelper.plist [Click for support]
[running] com.zeobit.MacKeeper.Helper.plist [Click for support]
User Login Items: ℹ️
Garmin Lifetime Map Updater Application Hidden (/Applications/Garmin Lifetime Map Updater.app)
Mindful Application Hidden (/Applications/Mindful.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.0.0.126 - SDK 10.8 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.04 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
GarminGpsControl: Version: 4.0.3.0 Release - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 7 Update 75 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
AdBlock
Facebook Improved
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
GoPro [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Mac OS: Disk size: 998.97 GB Disk used: 146.62 GB
Destinations:
Shenyang [Local]
Total size: 2.00 TB
Total number of backups: 100
Oldest backup: 2013-11-28 05:45:51 +0000
Last backup: 2015-02-20 14:09:49 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 146.62 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% SmartwareServiceApp
1% mds_stores
0% fontd
0% AppleSpell
Top Processes by Memory: ℹ️
2.41 GB Safari
601 MB SmartwareServiceApp
275 MB AntiVirus
172 MB MacKeeper Helper
172 MB ocspd
Virtual Memory Information: ℹ️
9.68 GB Free RAM
4.98 GB Active RAM
1.18 GB Inactive RAM
1.33 GB Wired RAM
1.99 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 20, 2015, 10:03:19 AM Self test - passed
Feb 20, 2015, 08:10:11 AM /Library/Logs/DiagnosticReports/SmartwareServiceApp_2015-02-20-081011_[redacted ].crash
Feb 19, 2015, 08:37:14 PM /Library/Logs/DiagnosticReports/SmartwareServiceApp_2015-02-19-203714_[redacted ].crash
Feb 19, 2015, 10:30:58 AM /Library/Logs/DiagnosticReports/SmartwareServiceApp_2015-02-19-103058_[redacted ].crash
Feb 18, 2015, 10:39:58 AM /Library/Logs/DiagnosticReports/SmartwareServiceApp_2015-02-18-103958_[redacted ].crash
Feb 17, 2015, 08:54:21 PM /Library/Logs/DiagnosticReports/SmartwareServiceApp_2015-02-17-205421_[redacted ].crash2/20/15 5:42:07.119 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[757]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:42:07.120 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:42:17.125 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[758]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:42:17.125 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:42:27.130 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[759]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:42:27.130 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:42:37.134 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[760]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:42:37.134 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:42:47.138 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[761]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:42:47.138 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:42:57.144 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[762]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:42:57.144 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:43:07.148 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[763]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:43:07.148 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:43:17.152 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[764]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:43:17.152 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:43:27.159 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[765]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:43:27.159 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:43:37.164 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[766]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:43:37.164 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:43:47.170 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[767]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:43:47.170 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:43:57.174 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[768]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:43:57.175 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:44:07.181 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[769]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:44:07.181 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:44:17.185 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[770]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:44:17.185 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:44:27.189 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[771]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:44:27.189 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:44:37.196 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[772]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:44:37.196 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:44:47.200 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[773]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:44:47.200 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:44:57.203 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[774]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:44:57.204 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:45:07.212 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[775]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:45:07.212 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:45:17.219 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[776]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:45:17.219 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:45:27.223 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[777]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:45:27.223 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:45:37.232 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[778]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:45:37.232 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:45:47.237 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[779]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:45:47.238 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:45:57.241 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[780]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:45:57.242 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:46:07.245 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[781]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:46:07.245 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:46:17.250 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[782]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:46:17.251 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:46:27.260 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[783]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:46:27.261 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:46:37.264 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[784]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:46:37.265 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:46:47.272 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[785]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:46:47.272 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:46:57.276 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[786]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:46:57.276 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:47:07.280 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[787]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:47:07.280 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:47:17.284 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[788]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:47:17.284 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:47:27.289 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[789]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:47:27.289 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:47:37.295 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[790]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:47:37.295 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:47:47.299 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[791]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:47:47.299 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:47:57.304 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[792]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:47:57.304 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:48:07.310 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[793]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:48:07.310 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:48:17.314 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[794]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:48:17.314 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:48:27.321 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[795]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:48:27.321 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:48:37.329 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[796]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:48:37.329 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:48:47.339 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[797]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:48:47.339 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:48:49.613 PM com.apple.WebKit.Plugin.64[798]: Failed to connect (colorGridView) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
2/20/15 5:48:49.614 PM com.apple.WebKit.Plugin.64[798]: Failed to connect (view) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
2/20/15 5:48:51.444 PM com.apple.WebKit.Plugin.64[799]: Failed to connect (colorGridView) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
2/20/15 5:48:51.444 PM com.apple.WebKit.Plugin.64[799]: Failed to connect (view) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
2/20/15 5:48:57.345 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[800]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:48:57.345 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:49:07.348 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[801]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:49:07.349 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:49:17.352 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[802]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:49:17.353 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:49:25.607 PM discoveryd[49]: Basic DNSResolver Error 9 on socket - this might be a closed socket
2/20/15 5:49:27.360 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[803]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:49:27.361 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:49:37.365 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[804]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:49:37.365 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:49:47.373 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[805]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:49:47.373 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:49:57.377 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[806]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:49:57.377 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:50:07.382 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[807]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:50:07.382 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:50:17.386 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[808]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:50:17.386 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:50:27.392 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[809]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:50:27.392 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:50:27.907 PM com.apple.WebKit.Plugin.64[810]: Failed to connect (colorGridView) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
2/20/15 5:50:27.908 PM com.apple.WebKit.Plugin.64[810]: Failed to connect (view) outlet from (NSApplication) to (NSColorPickerGridView): missing setter or instance variable
2/20/15 5:50:37.398 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[811]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:50:37.398 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:50:47.402 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[812]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:50:47.402 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:50:57.406 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[813]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:50:57.406 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:51:07.410 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[814]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:51:07.410 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:51:17.414 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[815]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:51:17.414 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:51:27.418 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[816]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:51:27.418 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:51:37.422 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[817]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:51:37.422 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:51:47.426 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[818]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:51:47.426 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:51:57.430 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[819]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:51:57.430 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:52:06.742 PM Console[820]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.2 instead of 10.10.2. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Call location:
2/20/15 5:52:06.742 PM Console[820]: 0 CarbonCore 0x00007fff85231d9b ___Gestalt_SystemVersion_block_invoke + 113
2/20/15 5:52:06.742 PM Console[820]: 1 libdispatch.dylib 0x00007fff8c5a1c13 _dispatch_client_callout + 8
2/20/15 5:52:06.743 PM Console[820]: 2 libdispatch.dylib 0x00007fff8c5a1b26 dispatch_once_f + 117
2/20/15 5:52:06.743 PM Console[820]: 3 CarbonCore 0x00007fff851da3ca _Gestalt_SystemVersion + 987
2/20/15 5:52:06.743 PM Console[820]: 4 CarbonCore 0x00007fff851d9fb7 Gestalt + 144
2/20/15 5:52:06.743 PM Console[820]: 5 libflavours.dylib 0x000000010c85da63 -[INUtil systemVersionMajor:minor:bugfix:] + 36
2/20/15 5:52:06.743 PM Console[820]: 6 libflavours.dylib 0x000000010c85cdcc __14-[INUtil init]_block_invoke + 121
2/20/15 5:52:06.744 PM Console[820]: FATAL: current OS version (10.10.2) is unsupported by this version of Flavours™. Please check for updates!
2/20/15 5:52:06.832 PM Console[820]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
2/20/15 5:52:07.324 PM flavours.agent[323]: warning: failed to get scripting definition from /Applications/Utilities/Console.app; it may not be scriptable.
2/20/15 5:52:07.324 PM flavours.agent[323]: AppleEvents: Send port for process has no send right, port=( port:17063/0x42a7 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) net.interacto.flavours.INPIDInjectionQueue
2/20/15 5:52:07.325 PM flavours.agent[323]: AppleEvents: Send port for process has no send right, port=( port:17063/0x42a7 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) net.interacto.flavours.INPIDInjectionQueue
2/20/15 5:52:07.435 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[822]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:52:07.435 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:52:17.439 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[826]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:52:17.439 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:52:27.446 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[827]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:52:27.446 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:52:37.449 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[828]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:52:37.450 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:52:47.454 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[829]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:52:47.454 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:52:57.458 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[830]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:52:57.458 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:53:07.462 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[831]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:53:07.462 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:53:17.466 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[832]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:53:17.466 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:53:27.473 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[833]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:53:27.473 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:53:37.478 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[834]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:53:37.478 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:53:47.484 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[835]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:53:47.484 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:53:57.488 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[836]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:53:57.488 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:54:07.492 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[837]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:54:07.492 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:54:10.736 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.736 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.736 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.736 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.736 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.736 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.737 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.737 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:10.737 PM WindowServer[139]: WSGetSurfaceInWindow : Invalid surface 1012827926 for window 131
2/20/15 5:54:17.499 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[838]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:54:17.500 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:54:27.505 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[839]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:54:27.505 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:54:37.509 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[840]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:54:37.509 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
2/20/15 5:54:47.513 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef[841]) Service could not initialize: Unable to set current working directory. error=13, path=/Users/michaelcullison/Library/Application Support/NexDef: 14C109: xpcproxy + 12907 [1227][63706214-56DC-3155-B46F-D4F21C9B1C0B]: 0xd
2/20/15 5:54:47.513 PM com.apple.xpc.launchd[1]: (com.mlbam.nexdef) Service only ran for 0 seconds. Pushing respawn out by 10 seconds. -
Powerbook 1400 with bad case of GLOD
Has anyone ever solved the GLOD problem? (green light of death)
I just acquired a PB 1400 166. I got it working very well including wi-fi. Very proud of myself.
I attempted to startup from a jaz scsi drive with OS9. I admit, I don't think I terminated correctly as in double termination. It refused to boot giving 'system' or 'bus error" message. I really thought that termination was internal.
Shortly after this, the PB was unresponsive with the sleep light glowing steadily green. I have read numerous articles on the subject of GLOD and tried all sorts of resetting pmu strategies
The pram batterries are, I believe, weak -- even there is some current inside even when battery and ac adapter are out. Replacements were on order anyway. The main battery may be failing even though it puts out 9.6 v.
I am going to hurl this PB out the window if the termination thing ruined it.
HELP!timoots wrote:
I am going to hurl this PB out the window if the termination thing ruined it.
HELP!
Hi Tim, sent you a pm just now.
I'd reset the power manager as I suspect that pram battery might be causing the issue. Hold in the reset button on the back between the mini din plugs for a few seconds.
If you are tossing it out a window toss it towards 1 Yonge Street..... just kidding I think it will be fine. I'm guessing you are in Canada from your email, if you are local to me maybe I can help we can test things out by swapping bits from one of our parts donors.....
You didn't add any memory did you?
Kevin -
Bad Case of Stagefright: New & Dastardly Vulnerability Found in Google's Android
Oh Wow. *Turns to my Android phone*....
Imagine this scenario:You woke early from a great night of sleep, well rested. The sun is shining outside. It’s Saturday, and you have no plans whatsoever, for the first time in a long time. The day is yours to make it whatever adventure you choose it to be. The world isn’t perfect, but right now life is good.You take your phone off the charger, and notice that you have no messages. Odd! You typically have a few, if only from social media. Further investigation reveals your contact list is gone. Emails, texts, messages, and photos too. Apps, data—everything has been wiped from your phone! While you were sleeping, the attacker gained access to all of your sensitive data through your phone, locked you out of your email and banking accounts, and gained access to your business’ secure network. And to make matters worse, you don’t know how...
This topic first appeared in the Spiceworks Community -
How to add reviewer by SRM BADI?
In SRM 7.0, We want to determin 3 reviewers automatically during Quotation WF by BADI.
Could you tell me how to config WF and give us a sample for BADI. we must use badi for complex logic.
Tks!Hi,
Follow the below steps for adding reviewer
1) create a responsibility resolver in the path:
SRM Server->Cross-Application Basic Settings->Business Workflow Process-Controlled Workflows-> Business Process Configuration ->Define Filter Values for BAdI 'Define Reviewer'
2) Create implementation for BAdi /SAPSRM/BD_WF_REVIEWER_RULE with filter for your business object & reponsibility resolver created in step 1.
3) Add your logic to determine reviewer in the method GET_REVIEWER_BY_DOCUMENT
4) In process level determination, select your business object and give the process schema evaluation id. This can be done using a BRF event and corresponding expression
5) For your business object specify your process schema
6) Specify your approval levels under process level configuration
7) Under Reviewer,
- specify your responsibilty resolver against the Rule
- specify the BRF event which is used to determine the reviewer step similar to approval step against Evaluation ID
- Specify the corresponding review task against Task ID
Hope this helps.
Regards,
Sivagami R -
Can app developers really delete negative reviews in Blackberry AppWorld?
I was browsing AppWorld, and concerned when I looked at StickyBoard Notes HD, by Joey Beechey.
In his description, he writes, "ALL REVIEWS THAT ARE JUST SAYING ITS STUPID TO CHARGE FOR AN UPGRADE WILL BE DELETED."
This has troubling implications. If a developer can simply remove any negative reviews they choose to, how can I use the reviews as a basis for whether I'll try out or buy an app? Can he really remove reviews, or is he just hoping to stop people from posting about that?Yes and no. The developer can "request" that a review is removed. This is something that should be checked by the App World team at RIM, but in reality they seem to grant any requests without hesitation.
There has been much discussion about this, because some developers abuse this. Many users who felt conned by the offline maps crooks posted a negative review, only to find it removed later.
In some cases reviews are automatically denied by App World. It seems to be fuzzy logic, but competitor names and profanity seem to flag reviews for automatic denial.
In the interest of full disclosure, of the 150 (almost all positive) reviews for our app, we have requested for 5 to be deleted: one was actually a very good rating but contained bad language. Another was a user who hadn't read the description. The other three were problems related to PlayBook OS, not our app.
Files & Folders, the unified file & cloud manager for PlayBook and BB10 with SkyDrive, SugarSync, Box, Dropbox, Google Drive, Google Docs. Free 3-day trial! - Jon Webb - Innovatology - Utrecht, Netherlands -
What is the best full protection case for the iphone 4/s
Can you guys tell me ASAP what is the best full protection iphone 4s case around, i want an all around protection case like lifeproof, i have hesard they are bad cases is that true.
Is it that easy to restore the iphone even if I have a pin?
I think it's a shame with all the tecnology with have we can't some how stop the phone from working if it ever gets stolen.
I think the best route to go down is to get it insured
Thanks for you help -
Something that annoys me about iTunes is that to be able to leave a review for an app sold on iTunes you must purchase the app first. This means that if you use a trial version of an app and it turns out to be a piece of c**p, like Tune-Up for iTunes, you have to purchase a piece of c**p to leave a review that it is a piece of c**p. There isn't even a way to contact Apple/iTunes to address this issue so here I am in the community. My issues are 2:
1) Leaving a review for a trial version of an app so others won't waste their money and forcing the develpoers to pay attention to reviews and improve their apps.
2) Apple/iTunes doesn't have a means to communicate directly trrough a customer service site, only this forum. How could this be changed?you can't review a light app unless you purchase a full version.
That is wrong. You can review a light/free version if you obtain that version; I've done it on several occasions. You do not need to own the full/paid version to review the light version. If you want to review the full version, you do have to buy that version. You can review the version you own, and only that version. Reviews are not linked, so the review of a light version will not appear in the full version, and vice-versa.
Why would anyone purchase a full version of a lousy app just to write a review that it's a lousy app?
Because unless you own that version, you have no standing on which to claim it's a lousy app. A "light" or "free" version may be very different, and in many cases reviews I've seen rate a light/free version as lousy solely because of features only available in the paid version.
Again, you have the feedback page via which you can comment to Apple. There's no further reason to continue this conversation.
Maybe you are looking for
-
Win 7 Brightness doesn't work after graphics update
Hey, I have a late-2010 MacBook Pro running Bootcamp 4.0 with Windows 7 64-bit. My graphics card is the nVidia GeForce 320m. I looked online recently and found that there was an update available for my graphics card (previously I had the one that com
-
Strange issue when synching information from phone...
Hi! Perhaps this has been asked before, sorry for this. A customer of ours uses our exchange 2010 services and uses Nokia E7 phones. The version of Symbian is Belle FP2. Setting up an account is easy and everything seems to work and to synch correctl
-
I tried all resets.
-
I can not find my saved iWeb files on my hard drive? I have searched every where. It opens fine in iWeb. What am I doing wrong?
-
What are the possible effects of changing regions on your apple ID?
Hi, I'd really like to know the possible effects of changing regions on one's apple ID. I've recently changed mine to UK's from Tanzania's - and I've provided a valid payment but the problem is on my recent downloads from that Tanzanian apple ID. I c