Bad Choice for Fatal1ty

If you bought a set of the original Fatal1ty headphones with the huge comfortable earpads and the permanent swinging mic boom.....your one of the lucky ones like me. But if you like my wife waited a few months and purchased (online from Creative as we did both times) the Fatal1ty set Creative now sells........Bummer for you! The set they now sell is poorly engineered and has all sorts of problems. The parts are thinner, internal wiring is not shielded, workmanship is lacking all together, thus pressing the internal wiring over each other and pressed together when the earpc cover is screwed down. The wiring connections are made with glue not mineral (solder) and easily fall apart if left laying in a warm spot....say on top of your PC. Creative come on guys, who's the QC dude and what's he doing. Bad Choice for Fatal1ty product line. Or was that the idea all along? To sucker us!

Hi,
Pls refer to my reply in your other post.
Cheers.

Similar Messages

For SD camcorder are miniDV tape and Firewire bad choices?

I just purchased a camcorder (Panasonic SDR_H40) which appears incompatible with iMovie HD 6, so I am going to return it. I currently have iMovie HD 6.0.3 and will probably stay with that version (based on some discussions on this site). I was going to buy a miniDV tape camcorder but they seem hard to find and the salesman said that this format was becoming obsolete. Also other discussions on this site suggest that Apple may be phasing out Firewire. Assuming that I can find a SD miniDV camcorder, presumably with a Firewire output, is this a bad choice for a camcorder? I'd appreciate any help.
Tricia

for 'Standard' (=not HiDef) video, miniDv is still an excellent choice:
° less compression => excellent pic quality
° no limitation in 'disk space' => insert new tape = another 13GB/60min recording time..
° easy/convenient long term storage of 'raw data' => keep the tapes
° 100% compatible with iMovie 6 and other versions..
prob here: actual consumer MacBooks lack a fw-port => miniDV import is via fw only.
your options: use your 'old' Mac; use a MacMini; use a MacPro ...
nobody can tell you about 'phasing' of fw on Macs .. +'we don't comment on future products'+ ..

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

Well, how have to determined no signal is being recieved to your mac?
Have you got something that shows the actual signal? Or have you just been trying to control a VST? What software are you using by the way?
I personnally went with a AKAI MPK25, because it's made already mapped for logic & ableton etc, so it just makes things incredibly easy.
I would suggest you return it if you can as a dead unit & perhaps look at something else a bit easier?
Otherwise, if you just want to get this working we can have a look a bit deeper.
And driver? OS X driver?

Thinkpad T410s - Is the 32-bit a wrong choice for me?

Hi everyone,
I have ordered T410s (2901CTO) with 4GB (2DIMM) and 32-bit Win7. My current concern is about running SAS (Statistical Analysis System) - a statistical and data management software application - that I use to process huge data sets (at least 5GB each). Is the choice of 32-bit a bad choice, because I will not be able to take full advantage of memory upgrades if I want later on.
Say if I buy 8GB for the memory upgrades, then it's only a waster of $$$ as the 32-bit system can only see it but cannot access it. Is that really the case? What is the solution for me now besides returning it and placing a new order for the 64-bit?
Another question is, How can I determine the year/month of release for this model T410s 2901CTO? I've been trying to find it out on the net and I still haven't been able to find any information.
Thanks so much for helping!

Hi pantera,
You can order 64-bit version from lenovo without returning your system:- http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74752
T410s was introduced in the beginning of 2010, if you're looking for the manufacturing date of your system then you can find it on the back sticker, it reads in this format Year/Month (e.g. 09/12).
Hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

French è in modified files name is a bad choice (french version)

French version.
As Photoshop Album, LR add a suffix with an è (the long french world Modifié) to file name when you mofify an image with external editor Photoshop.
It is a bad choice to add an accentuated character (è) to a file name. When you publish picture on the Web. Many Web softwares or Internet Web sites providers, dont make any différence between e and è, so links can be broken. For instance, you can get è in HTML link (if you use an french HTML editor) but e in file name on provider disk.
It would be much better to apply a shorter suffix, with no localized specific character : bis, alt, supp, corr...

't Was the GREP styles ... It wasn't even as if they were that complex, but they did add a layer of complexity by adding No-Breaks (and not even to much text either).[*]
Rather than temporarily removing the NoBreak in the applied character style, I just deleted all GREP styles from my paragraph styles. But it doesn't matter which temporary solution I choose, because any global change in the styling will have the text re-flown. However, I can live with that if it means I can get the work done in one day instead of ten.
[*] After reading Uwe's links (in German): it's not because of my particular application of No Break. It seems Extreme Slow-Down occurs as soon as you apply a GREP style to an element that occurs a lot; the contents of the GREP seems not to matter.
Martin Fischer wrote:
Nachdem ich die GREP-Stile für die Fremdalphabete und Sonderzeichen gelöscht habe, stelle ich fest, dass der genannte Verzögerungsfaktor von 5-10 deutlich untertrieben war. Jetzt erst zeigt sich wieder, wie InDesign flutschen kann. Das Arbeiten macht wieder Spaß.
[After I killed off the GREP styles for foreign language alphabets and special characters, I found that the mentioned slowdown factor of 5-10x was even understated. Only now InDesign again shows it can fly. Work is fun again.]

MSI P67-GD65 (B3) Did I make a bad choice? I'm building a new system!

After reading all the problems everyone seems to be having with boot problems and freezing, did I make a bad choice? Here's what I'm putting together when the parts arrive.
It's been a few years since I built my own rig, but every pc I've ever owned I built myself except my Dell XPS 630i (got a screaming deal).
MSI P67-GD65 (B3)
Intel i7-2600K unlocked and unleashed
CORSAIR high performance Vengeance memory module 8GB (2x4GB) 1600MHz 9-9-9-24, 1.5V
Sapphire AMD Radeon HD 6970 2GB GDDR5 PCI-E 1080P
Western Digital Caviar Black 1T Hard Drive
Dell XPS 630i Case and Delll 750W power supply (I know I shouldn't reuse this case)
Windows 7 Ultimate 64bit

"Dell XPS 630i Case~I know I shouldn't reuse this case"
Poor case for cooling with quad CPU and higher power consuming VGA card as you sure will end up with high temperature problems. It would be wise to get a better case.

BADI help for IS Retail

Hi Friends,
I need to implement badi "WRF_APC_X_PLITEM_E", when I went for the implementing it, in documentation of method "DISTRIBUTE_QUANTITIES" I found the below note
<b>Notes</b>
To complete the implementation of this method, you must add a new menu option on the purchasing list toolbar by implementing the method ON_TOOLBAR of the BAdI WRF_APC_X_PLISTALV_E.
This new menu option must have the function code 'DISTR_PQ' with the text description of your choice (for example, 'Distribute quantities top down'.
So If anyone has handled this kind of problem to handle function code please provide me the solution.
Regards,
Varsha

Hi,
1. In retail Site need to be created by T-code WB01 as Same site acting as vendor and customer also .
2.You can use AC01 to create srvice master data but ou can not use MM01 in Retail .
3. You will get useful info. link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/50/94f500470e11d1894a0000e8323352/frameset.htm

Adobe Creative Cloud and Adobe Creative Suite: New Choices for Customers

Adobe has announced the new Cloud-based model for software distribution, along with new terms for boxed product upgrade eligibility. Beginning with the CS6 releases, when they happen, upgrade pricing on boxed products will only be availble one generation back. There is a limited window to upgrade now to the current versions at a discount.
See http://blogs.adobe.com/conversations/2011/11/adobe-creative-cloud-and-adobe-creative-suite -new-choices-for-customers.html

Eugene:
Based on the current information we have (from the blog post), which may not be correct and which you should not rely upon:
There is some confusion about the word "discount." As used in the blog post, in general there are no "discounts" for upgrades, there is the upgrade price and there is full price. But, also in the blog post, there is a special "discount upgrade" if you choose to upgrade to CS5.5 today (prior to Dec. 31, 2011), which is 20% off the regular upgrade. However, Peter used the word "discount" to distinguish between upgrade pricing and full price. It's probably a good idea to avoid using that word there because of the potential for confusion.
I have CS5 InDesign in work. So I will be able to upgrade that to CS6 when it comes out at the discount price?
You will be able to upgrade to CS6 at upgrade pricing. Not the 20% discount, but it is "discounted" from the full price of CS6.
I'm still using CS2 Illustrator and Photoshop, for the little work I do in those programs, they're fine. But if I want to upgrade them to CS6 I have to pay the full amount of an upgrade, with no discount... or will I have to pay for CS6 in full for both of these programs?
You will have to pay the full price (not the "full amount of an upgrade," whatever that means).
If you elect to upgrade to CS5.5 prior to Dec. 31 of this year, however, then then you can pay the discounted upgrade price to upgrade to CS5.5 (well, CS5 since Photoshop CS5.5 doesn't exist), and then you can pay the CS6 upgrade price in March/April. So you can pay for no upgrades (full price) or two upgrades (one of which is 20% off).
At the moment I can upgrade CS2, photoshop and Illustrator for €240 each, to CS5. So wouldn't I just be able to do that now and then buy the CS6 upgrade at a much later date perhaps just before CS7 comes out?
Yes, you can do that.
If CS6 has the tools to basically go "File>Export>Epub" and I get a fully working epub file without having to trash about in code afterwards or make complex tagging in InDesign, then I'll be buying it.
It looks like EPUB is evolving pretty fast, so even if ID CS6 fully supports what you want out of EPUB on Day 1, I bet you'll need to be prepared to postprocess it on Day 2. Or at least long before Day 200.

BAdI UC_DATATRANSFER for BCS Mapping in "Load from Data Stream" method

Hello Everyone,
I need some help on finishing up the code for the UC_DATATRANSFER BAdI.
I have looked up in the SDN and other places, but could not get comprehensive breakdown of documentation except for the "F1" documentation available on the BAdI.
So, any help would be appreciated.
The Steps so far completed,
1. Have activated the BAdI and have created the filter value for the BAdI.
2. After the BAdI has been activated, I was able to go into the MAP method and have written the logic for profit center derivation from consolidation hierarchy.
The issue is there are four components for the Map method,
IT_DATA_SOURCE
IS_DATA_TARGET
ES_DATA_TARGET
ET_DATA_TARGET
The data is available from Source system in the table IT_DATA_SOURCE.
But this is not changeable as it is "Importing" type. Whereas the actual ET_DATA_TARGET which is passed over into FINALIZE method of the BAdI is not filled initially.
When I try to do a MOVE-CORRESPONDING from the IT_DATA_TARGET into ET_DATA_TARGET I continuously am getting the short dumps as both the tables length is not the same.
Did anyone else face the same issue as above when trying to do the BAdI implementation for Mapping.
I will really appreciate if any one can provide me a sample code if possible.
Let me know if you need additional information.
Thanks
Dharma.

Hello,
Thanks for looking into the question.
I already had tried doing that, I get the Short dump stating the object tables are not convertible.
When I looked into the table structures, I found out that the table structures "IS_DATA_TARGET", "ES_DATA_TARGET" & "ET_DATA_TARGET" belong to the same category in terms of these structures being flat structures or tables of length 484 as per the debugger.
Whereas the structure "IT_DATA_SOURCE" has the length 404.
Due to this reason when I say,
ET_DATA_TARGET = IT_DATA_SOURCE, I keep getting the short dumps.
Also, is your consolidation process legal or managerial.
Our Consolidation process is legal and we have the Company and Profit Center fields assigned to the Consolidation Unit role in the Data Basis definition.
Can you please let me know what is the structures length in your system.
Thanks
Dharma.

How To create a message Choice for a page?

Hi,
I need to create a message choice for a page and on selection of that it should navigate me to next page..like
ex:
If iam havng 10 locations like Delhi,Hyderabad,Chennai....
I need to select one of them and it should be navigated to next page based on the above selection...These values are to be retrieved from database...
Can u gimme any idea..how to proceed?

Maybe something like this will help.
On your <af:selectOneChoice/> component configure a valueChangeListener and set autosubmit to true.
In your valueChangeListener change the current view like :
public void handleValueChanged(ValueChangeEvent valueChangeEvent) {
// Add event code here...
if (!PhaseId.INVOKE_APPLICATION.equals(valueChangeEvent.getPhaseId())) {
valueChangeEvent.setPhaseId(PhaseId.INVOKE_APPLICATION);
valueChangeEvent.queue();
} else {
// add additiional app functionality here
ControllerContext controllerContext = ControllerContext.getInstance();
ViewPortContext viewPortContext = controllerContext.getCurrentViewPort();
viewPortContext.setViewId("test");
Regards,
Kenneth
The deferred execution of ValueChangeEvent is necessary as the ViewID can only be changed in INVOKE_APPLICATION phase.

Mkfs: bad value for nbpi: must be at least 1048576 for multi-terabyte, nbpi

Hi, guys!
*1. I have a big FS (8 TB) on UFS which contains a lot of small files ~ 64B-1MB.*
-bash-3.00# df -h /mnt
Filesystem Size Used Avail Use% Mounted on
/dev/dsk/c10t600000E00D000000000201A400020000d0s0
8.0T 4.3T 3,7T 54% /mnt
*2. But today I noticed in dmesg such errors: "ufs: [ID 682040 kern.notice] NOTICE: /mnt: out of inodes"*
-bash-3.00# df -i /mnt
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/dsk/c10t600000E00D000000000201A400020000d0s0
8753024 8753020 4 100% /mnt
*3. So, I decided to make file system with new parameters:*
-bash-3.00# mkfs -m /dev/rdsk/c10t600000E00D000000000201A400020000d0s0
mkfs -F ufs -o nsect=128,ntrack=48,bsize=8192,fragsize=8192,cgsize=143,free=1,rps=1,nbpi=997778,opt=t,apc=0,gap=0,nrpos=1,maxcontig=128,mtb=y /dev/rdsk/c10t600000E00D000000000201A400020000d0s0 17165172656
-bash-3.00#
-bash-3.00# mkfs -F ufs -o nsect=128,ntrack=48,bsize=8192,fragsize=1024,cgsize=143,free=1,rps=1,nbpi=512,opt=t,apc=0,gap=0,nrpos=1,maxcontig=128,mtb=f /dev/rdsk/c10t600000E00D000000000201A400020000d0s0 17165172656
*3. I've got some warnings about inodes threshold:*
-bash-3.00# mkfs -F ufs -o nsect=128,ntrack=48,bsize=8192,fragsize=1024,cgsize=143,free=1,rps=1,nbpi=512,opt=t,apc=0,gap=0,nrpos=1,maxcontig=128,mtb=n /dev/rdsk/c10t600000E00D000000000201A400020000d0s0 17165172656
mkfs: bad value for nbpi: must be at least 1048576 for multi-terabyte, nbpi reset to default 1048576
Warning: 2128 sector(s) in last cylinder unallocated
/dev/rdsk/c10t600000E00D000000000201A400020000d0s0: 17165172656 sectors in 2793811 cylinders of 48 tracks, 128 sectors
8381432.0MB in 19538 cyl groups (143 c/g, 429.00MB/g, 448 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
32, 878752, 1757472, 2636192, 3514912, 4393632, 5272352, 6151072, 7029792,
7908512,
Initializing cylinder groups:
super-block backups for last 10 cylinder groups at:
17157145632, 17158024352, 17158903072, 17159781792, 17160660512, 17161539232,
17162417952, 17163296672, 17164175392, 17165054112
*4.And my inodes number didn't change:*
-bash-3.00# df -i /mnt
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/dsk/c10t600000E00D000000000201A400020000d0s0
8753024 4 8753020 1% /mnt
I found http://wesunsolve.net/bugid.php/id/6595253 that is a bug of mkfs without workaround. Is ZFS what I need now?

Well, to fix the bug you referred to you can apply patch 141444-01 or 141445-01.
However that bug is just regarding an irrelevant error message from mkfs, it will not fix your problem as such.
It seems to me like the minimum value for nbpi on a multi-terabyte filesystem is 1048576, hence you won't be able to create a filesystem with more inodes.
The things to try would be to either create two UFS filesystems, or go with ZFS, which is the future anyway ;-)
.7/M.

Officejet Pro 8600 Premium e-All-in-One - N911n photo paper Not a paper choice for Tray 1

For the HP Officejet Pro 8600 Premium e-All-in-One - N911n printer
I am running Windows 7 64-bit
No error Messages
New Printer setup
I do not see photo paper as a paper choice for in Tray 1
This question was solved.
View Solution.

Hi FrancoArdito,
Follow the steps below to print photo from Tray 1
1. Insert the 4x6, 5x7 or 8x10 photo paper into Tray 1
2. Open printer preferences from the printing application program
3. Click on Paper/Quality tab
4. Select the Paper Size, Media Type, and the the Paper source
5. Click Ok to save the settings, and then print from the application program.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Choices for free goods determination

Hi all,
I want to have choices for free goods determination, like for Material A I want an option to select either of Material A or B.
Is this possible.
regards,
Vandana Arora

hello, friend.
it is possible to do this manually, and not through the free goods determination.
let us say you want to give 1 unit of either material A or B for every 10 units of C ordered by the customer. what you do is create a sales order for 10 units of C as the first line item. let us further say the first line item is item 10.
enter either A or B as the second line item, which is item 20. go to the column HL Itm and enter 10. also change the item category of this line item to TANN. just be sure to maintain this set up in item category assignment in IMG.
there are drawbacks to this procedure, in that your choices for free goods will not be limited to material A or B. but this could work for you.
you may also wish to create a BOM, wherein free good A can be replaced by B.
regards.

Any standarad badi exits for tranction for bp ie in crm

any standarad badi exits for chnaging or writing code in sap-crm standard tranction bp(busness patner) tr code is bp

hello,
BP is BDT (Business Data toolset) enabled (you can check it by adding break point in FM BUS_PBO and executing BP transaction). You can add your check directly to standard view (the check will be executed each time when user pushes enter) or you could add you check to appropriate action (during saving etc.) there are number of actions which you could use it depends on your requirements. You can find a lot of info about BDT (if you are not familiar) in Wiki.
br,
dez_

User Exit / Badi / BTE for Asset creation A ?

Hi Experts,
I need User Exit / BADI / BTE for asset Creation.
After saving newly created Asset from As01 we need to send a mail to the person for whom the Asset is assigned.
i have tried all this.But no one is triggering after saving the As01 transaction.
Exit Name           Description
AAPM0001            Integration of asset accounting and plant maintenance
AFAR0003            External changeover method
AFAR0004            Determination of proportional values for retirement
AINT0004            Change amount posted for certain areas
AINT0005            Dummy for extended syntax check. Do not use.
AISA0001            Assign Inventory Number
AIST0001            Exchange number range in master data maintenance
AIST0002            Customer fields in asset master
AMSP0002            Determine relationship type for two company codes
TRAN0001            User exit for asset transfer
Please suggest if anybody worked on this.
regards,
Imran

Hi,
Check out the following posts pertaining to similar topic.
Change Asset Workflow
Asset Management WORKFLOW
Regards
Sreekanth

Bad Choice for Fatal1ty

Similar Messages

Maybe you are looking for