Bad connection with my airport-express

I have all my music in the cloud and when I play it from my computer via the airport-express it works perfect. Now I bought an i-pad and when I play music from the i-pad via the airport express it is contently interrupted. It is not the wifi because when I use the i-pad as speaker it works o.k. Any ideas?
Wim

The laptop have much better wireless adapter and antenna, it will stream much better than the iPad.
You can easily verify that with SpeedTest.
https://itunes.apple.com/sg/app/speedtest.net-mobile-speed/id300704847?mt=8

Similar Messages

My system can not connect with the Airport Express while the signal is very good?

Neither my phone nor my desktop (windows 7) can not make a connection with the Airport Express. The signal keeps flashing amber.
Several specialists have checked but can not solve this problem. Any ideas?

I am in exactly the same boat...

Losing wireless connection with my airport express with my powerbook G4

Lately I've been losing my wireless signal from my powerbook G4 to my airport express. The light on my airport express still shows as green, so I was wondering if the trouble lied in wither the airport express or my mac? I'm running on the 6.2 version that mac had offered as an update for the express.
The signal returns if I shut down my mac, and then turn it back on, as well as unplugging the airport express and replugging it in as well. This is starting to occur now once a day at least.
I keep my powerbook in the same room as the airport express, and it is usually in fact sitting on my desk above it...so range isn't really an issue.
This is getting tedious, and would like to know how to nip this in the bud.
Please be detailed in your responses. I'm not to tech savey. Thanks.

Lately I've been losing my wireless signal from my
powerbook G4 to my airport express. The light on my
airport express still shows as green, so I was
wondering if the trouble lied in wither the airport
express or my mac? I'm running on the 6.2 version
that mac had offered as an update for the express.
The signal returns if I shut down my mac, and then
turn it back on, as well as unplugging the airport
express and replugging it in as well. This is
starting to occur now once a day at least.
I am also experiencing the same problem, also only since recently updating my AE firmware. I will provide a bit more information so that maybe someone will be able to offer some suggestions.
I have one AE connected to a BT Broadband modem. My iMac is down the hall, connected to the AE for internet and for Airtunes. What I experience is that I will lose connectivity to the airport itself. In fact, sometimes I can actually watch as my airport signal indicator in my menu bar jumps up and down repeatedly (although sometimes the airport signal just disappears altogether and then when I go looking for it in my Airport menubar, my network is no longer listed). The green light on my AE always stays constant when this happens (even when the airport signal goes away completely). The BT modem seems to be fine.
AE basestation firmware is V6.3.
I am connected to my AE using WPA Personal (anyone know what the Group Key Timeout option does? Mine is set at 60 minutes by default... no idea if that is connected to my issue, but I didn't want to play with it since I don't know what it does).
Channel: Automatic, Closed Network. Access Control is enabled so that only my iMac can access the network. Airtunes is enabled.
Under wireless options, multicast rate is 1, interference robustness is not enabled, and transmitter power is 100%.
Anyone have any ideas about what the problem is and what I can do to try and fix it?
Thanks.
G4 iMac 800 MHz Mac OS X (10.4.4) 1 GB RAM

Can't connect with my airport express

When trying to connect to my airport express tool I get the error code 10057, can anybody help??

Try this:
https://discussions.apple.com/thread/3289924
Kind regards,
Jason Havens
Destin, FL, USA

Itunes will not connect with my airport express

My new macbook will connect automatically to my airport express network with airtunes but the itunes on my imac will not. It show the network as an option for additional speakers but when I choose the airport express network as my external speakers it gives me a box saying it is connecting then after a few minutes it just goes away and reverts to the computer for my speakers. Any ideas on what to do? The aiport express has the latest firmware update.

Check the Firewall settings in the Sharing area of System Preferences.
I think you need to have iTunes Music Sharing enabled (maybe not).
Ian

Current version of airport utility will not connect with older airport express

I was given an older aiport express that I want to add to my network for iTunes sharing. I have an airport express and aiport extreme currently. I am running Mac OS x 10.7.5. My current version of airport utility does not support this express and it tells me to download utility version 5.6. When i try to install version 5.6 i get an error message that tells me to contact software manufacturer. I'm sure there is a simple fix but I don't know what to do. Any help would be great!

Hi
again , at least for getting 5.6 installed, look at my post earlier, or better to JEFFY's and download an much better alternative "unpkg", to get it ( 5.6) on to your mac.
Then, though, getting to use it to configure your older AP as I attempted is anothe matter. I didn't succed so far..
Good luck to you. If it works pse tell .
Thanks.
Pierre

How can i check the devices which are connected with my AirPort Express?

I saw an unknown device in the app 'Who Uses My Wifi?', how can i check it through AirPort Utility and can i remove this device by the app?

Open AirPort Utility
Hold down the option key on your Mac while you double click the picture of the AirPort router
Currently connected wireless ciients will be displayed
Don't forget about the wireless printer you might have, baby monitor, wireless thermostat and other items that connect using wireless. They will appear on your check.....not just computers or iPhones, etc.
If you have 3 wireless devices, and you see 4 devices connected, you may have an unwanted guest.
If you are using good wireless security, like WPA2 Personal, and a good password, it is extremely unlikely that another device will be on your network

Can I share my internet with my Ipad and simultaneously connect to a airport express that I use to remotely connect speakers?

Can I share my internet from my Imac with my Ipad and simultaneously connect to a airport express that I use to remotely to connect speakers?
The big problem that I'm having is that when internet sharing via the airport I can not simultaneously connect with my airport express. It would be great to be able to share internet from my Imac so I can be using my Ipad and at the sametime have my wife use the airport express to stream music in a different room. It would be awesome to be able to have the ability to do both. Does anybody know how?

Unless your iMac was made before 2006 (this forum is for old iMacs), you might get better assistance by posting in one of the following forum areas:
AirPort
Using iPad
iMac (Intel)

Problem of canon Lbp 2900 printer with my airport express

I can install canon Lbp 2900 printer connected with my airport express, but when I print, it shows the communication error. but when I directly install the printer to my macbook through USB, everything works fine ,it can print well. Anyone can help?
and I followed the instructions below:
This is what worked for me...
The printer works with Mavericks using the new CAPT v3.65 driver available here: http://support-au.canon.com.au/contents/AU/EN/0100420705.html and the old Mountain Lion patch which is available here:
https://docs.google.com/file/d/0B7kZEfXZH5ZXOEt0R2NnNVpwdDQ/edit?usp=drive_web&p li=1
Go to System Settings / Printers and Scanners and delete your printer, then restart your computer. Install the new CAPT driver and restart your computer. Install the patch and restart your computer.
Go to System Settings / Printers and Scanners and reinstall your printer selecting Cannon LBP2900 (CAPTuk) driver from the drivers list
You should now have a working printer.
Good Luck

In crowded WiFi situations, everything will slow down. Based on your description.....it is what it is.
I've already controlled the usage of wifi-channels around and I'm using the one with fewest users.
You want to be the only user on a channel. Even then, users on other adjacent channels in close proximity will drag down the bandwidth/speed on the entire network.

Airplay won't connect to my Airport Express & is intermittent with Airport Utility

Hi
Yesterday, my iTunes 10 stopped connecting via Airplay to my Airport Express. It spent a long time displaying a Connecting message, then finally gave me this error message: "An unknown error (-15006) occurred while connecting to the AirPlay device AirPort Express”.
I have a Macbook Pro 2.5 Ghz Intel Core i5 (6 months old). 4 GB 1600 MHz DDR3.
Running OS X 10.7.5.
My main modem/router is a Livebox and I usually going my Airport Express to the Livebox network to play music.
My Airport Express is 802.11g
All my equipment is within a radius of 2 or 3 feet.
I'm aware of at least one other recent thread about this problem (https://discussions.apple.com/thread/4150757?tstart=0), but none of the solutions suggested have resolved my problem, so I have summarized a list of the actions I have so far taken to try and resolve the problem. Hopefully, this will help others sort this issue out for themselves.
ACTIONS TO SOLVE ISSUE
1. Ran Airport Utility 6.1, which was unable to find my AX.
2. Downloaded, installed & ran Airport Utility 5.6. AU 5.6 still couldn't find my AX, giving me this error message:
"AirPort Utility was unable to find any AirPort wireless devices. Make sure the AirPort wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again."
3. Unplugged the AX and did a hard reset. AU found my AX and I configured it to join my Livebox network. After being configured, the green light came on the AX, which also appeared on the AU list of devices. However, AU still had the message "Waiting for Airport Express to reset…" with a spinning ball for several minutes. So, I closed the AU window (as AU advised), and reopened it. Happily, the AX was still listed.
4. Reopened iTunes and tried to select my AX as speaker output. At that exact moment, the AX vanished from the AU list of devices and, after the long wait, iTunes gave me the same error message as before:
"An unknown error (-15006) occurred while connecting to the AirPlay device AirPort Express”.
When I tried to rescan for devices in AU, I got the same error message:
"AirPort Utility was unable to find any AirPort wireless devices. Make sure the AirPort wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again."
5. Hard reset and configuration of AX. This time I didn't close the AU window, I waited for the AX to reset. When the spinning ball finally vanished, I got this error message:
"An error occurred while reading the configuration. Make sure your Apple Wi-Fi base station is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)"
6. Apple help pages suggested updating the AX firmware. I downloaded the firmware update, did the AX hard reset/configuration routine, then tried to run the firmware installer and got this error message:
"An error occurred while attempting to communicate with the AirPort Express. (-8)"
7. Ran all the software updates, including upgrading to iTunes 11.
8. Spent over 5 hours doing many many hard resets of the AX, combined with iTunes restarts, MBP restarts etc. Along the way, I discovered that if I hard reset & configured the AX, after a few minutes, AX would disappear from the AU device list without me doing anything.
9. Attempted to change IPv6 options, using following methods:
a. System Preferences -> Network -> Advanced -> TCP/IP -> IPv6 _> Link-local only
b. In Terminal.
networksetup -listallnetworkservices
networksetup -setv6off Wi-Fi
Neither method had any effect on the ability of AU to see my AX.
Phew! I'm now exhausted & rather demoralised. Anyone got any other ideas?

I have been dealing with this for days now. I'm not sure what the solution is either, I've spent most of my vacation from work attempting to get it to work with my speakers and printer, none work still!!
It seems like a lot of ppl are dealing with these errors but there isn't one solid solution out there.
Try to set the AX wirless setting to "off" and only have it work for Airplay, Does it work for you?
One last thing, could this be an update problem? As in, you update your firmware/software and it renders the AX obselte. My AX is old probably a little older than 4-5 years, what about your?
I would really like to get this to work as I do not think I need a new AX to make this work.
Let me know your thoughts.
B.

How do I share a 3G USB modem connected to my Macbook Pro with my Airport Express?

Hi. I have a 3g USB modem connected to my macbook pro, and I want to try share the signal with my Airport Express (latest model).
Now before everybody screams that it can't be done, I was searching the forums and found a discussion in which someone describes how to do it from 2008, unfortunately it is archived and I couldn't ask the author directly, and the description doesn't go into much detail.
In the thread, the author describes turning internet sharing on to share the USB modem, creating a network on the macbook, then renaming the Airport Express network name the same as the macbook, and setting the AX to Join a Network.
Problem being there is no description of whether the macbook connected to the AX via ethernet or wifi, what settings were changed on the AX eg bridge mode.
Is this possible in theory, and has anybody had any success sharing a 3g USB modem via a macbook pro to an AX? I know there are other options like getting 3g ethernet modems, unfortunately not an option in this case - new house, waiting for DSL to be installed, 2-3 month wait.
Thanks

Well, you cannot use the 3G USB modem plugged directly into the Express. However, you can configure your MacBook Pro to do 'Internet sharing' (SysPrefs>Sharing) over the Ethernet port, and then connect your Express into the Ethernet port. Alternatively, you could always get your MacBook to 'create a wireless network'.
new house, waiting for DSL to be installed, 2-3 month wait.
You could always look for open WiFi networks to *cough*borrow*cough* .

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.

I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.

Hi Jake,
Is it connecting to the Router or Modem?
Is the new Router using maybe WPA2 encryption? If so, G4s can only do WPA or less.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
Then... Try putting these numbers in Network>Airport>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6

Set up Airport Extreme with 2 Airport Express connected by CAT5??

I recently bought an Airport Extreme base station and an Airport Express. My plan was to use to Airtunes with my AV receiver in my basement. Unfortunately, because the distance between these two areas is long (and separated by two floors) I'm not able to get a strong enough signal with the Airport Express to use Airtunes. I bought another Airport Express to put on the middle floor of our house but the signal in the basement was still not strong enough even with this addition.
I do have a way of connecting the middle floor of our house with the basement area by a CAT5 ethernet cable. My plan now is to connect the two Airport Express modules by their ethernet ports with this cable. The Airport Express on the middle floor connects with the Airport Extreme base station wirelessly without any problems. My question is what is the proper setup for the 2nd Airport Express connected by ethernet in my basement.
Airport Tech support said this could be done. They recommended setting up a new wireless network with the 2nd Airport Express by "fooling" into thinking it was connected directly to the router but using the same network name with a different wireless channel as my Airport Extreme base station. This setup actually works for several hours but then the Airport Express module that is connected to the Airport Extreme blinks amber. Interestingly the 2nd Airport Express with usually remain with the green light on.
Does anyone have any suggestions for the best way to set this up regarding network configuration with the Airport Utility?
Thanks

wmskaggs, Welcome to the discussion area!
They recommended setting up a new wireless network with the 2nd Airport Express by "fooling" into thinking it was connected directly to the router but using the same network name with a different wireless channel as my Airport Extreme base station.
That will work with as long as the AirPort Express (AX) is connected via Ethernet. The only other setting you need to make is to configure it to act as a bridge (not sharing a single IP address).
If this one looses connection, then something is wrong with the AX or the Ethernet connection (cable and/or connectors).

Can I use I pad 2 directly with my airport express to play music through my hi fi that's connected to the airport express vis headphone jack?

Can I use I pad 2 directly with my airport express to play music through my hi fi that's connected to the airport express vis headphone jack?

Yes, that's one of the things airplay is for...

Bad connection with my airport-express

Similar Messages

Maybe you are looking for