Bad Cooling Athlon XP after upgrade driver
After upgrading new drivers for my board MSi MSI KT3 ULTRA, KT333, and Atlhon 2000XP I cannot cool CPU for less then 56 Celsius !!!!!!!! I have good cooler with the changing of turns CoolMaster and before upgrade I have been easy on 36 Celsius grade . Can some one help ?! Thank you
It seems it is not the driver but new PC Alert 4, what I have been also upgraded, yes it was using for 100% CPU and after exiting this program it seems to be OK. Regards Jirka.
Similar Messages
-
FF29 fails to load Session Manager, old tabs, any add-ons, Cool Preview, etc after upgrade on XP
FF29 fails to load Session Manager, old tabs, any add-ons, Cool Preview, etc after forced upgrade on an XP system. Connecting to sites, especially support.mozilla.org requires numerous retries. Clicking Add0on shows none of the previous working ones. They are gone. No Session Manager at all. Even reporting this has taken over 3 hours. Yesterday, everything worked fine before the restart to 29. What can be done to recover settings from 2-3 days ago? Thanks for keeping it simple!
Thank you for your question. Once history is gone, there is not a big chance of getting it back. However there are some places to check. For next time, try to backup your profile [http://kb.mozillazine.org/Profile_backup].
The crash reports from your troubleshooting information is caused by a hang in the Flash plug in version 13. I understand however that this is an issue with the history.
*[[Recovering important data from an old profile]]
*[[https://addons.mozilla.org/en-US/firefox/addon/cacheviewer/ Cache Viewer]] is an add on to help you search through the dates of the history
*SQLite add on will allow you to open places.sqlite file in the current profile. -
Bad performance on CF9 after upgrade from CF8
Hello and happy new year for everybody
I'm stuck with a problem after upgrade from CF8 entreprise to CF9 entreprise.
We are using IIS6 on WIN2003R2 (SP2).
There are a lot of "503 Server Error" with no content. (about 0.05% of request). This can be occured on big or small CFM, graphic ressources, etc...
For each error I can see the following error on the connector logs (jrun_iis6_wildcardYYMMDD.log).
2011-01-02 19:00:05 jrISAPI[1456:3940] returning error page for JRun too busy or out of memory
I've never seen this message in previous CF connector version.
And on the jrun log (coldfusion-outXXX.log), I read the following errors:
02/01 20:53:31 error unexpected end of part
java.io.IOException: unexpected end of part
at com.oreilly.servlet.multipart.PartInputStream.fill(PartInputStream.java:96)
at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:191)
at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:152)
at com.oreilly.servlet.multipart.FilePart.write(FilePart.java:257)
at com.oreilly.servlet.multipart.FilePart.writeTo(FilePart.java:215)
at coldfusion.filter.FormScope.fillForm(FormScope.java:252)
at coldfusion.filter.FusionContext.SymTab_initForRequest(FusionContext.java:376)
at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:33)
at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53)
at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:126)
at coldfusion.CfmServlet.service(CfmServlet.java:200)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
02/01 20:53:31 error (JRun Service: ProxyService [jrun.servlet.jrpp.JRunProxyService@4006ca]) JRunPRoxyServer.invokeRunnable:
java.lang.IllegalStateException
at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
java.lang.IllegalStateException
at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
Connector settings (jrun_iis6_wildcard.ini) :
verbose=false
Buffer=true (I've tried with false)
serverstore=C:/ColdFusion9/runtime/lib/wsconfig/1/jrunserver.store
bootstrap=127.0.0.1:51800
apialloc=false
maxworkerthreads=100 (I've tried to increase/decrease this value)
JRUN settings:
Threads number: 150
Max queued jrun threads: 150
Is anyone have experience the same issue ? How can I try to solve this ?
Big thanks!@Charlie:
in the cf\runtime\logs there is only that kind of information:
05/01 10:28:44 error unexpected end of part
java.io.IOException: unexpected end of part
at com.oreilly.servlet.multipart.PartInputStream.fill(PartInputStream.java:96)
at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:191)
at com.oreilly.servlet.multipart.PartInputStream.read(PartInputStream.java:152)
at com.oreilly.servlet.multipart.FilePart.write(FilePart.java:257)
at com.oreilly.servlet.multipart.FilePart.writeTo(FilePart.java:215)
at coldfusion.filter.FormScope.fillForm(FormScope.java:252)
at coldfusion.filter.FusionContext.SymTab_initForRequest(FusionContext.java:376)
at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:33)
at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53)
at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:126)
at coldfusion.CfmServlet.service(CfmServlet.java:200)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
05/01 10:28:44 error (JRun Service: ProxyService [jrun.servlet.jrpp.JRunProxyService@16c00e2]) JRunPRoxyServer.invokeRunnable:
java.lang.IllegalStateException
at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
java.lang.IllegalStateException
at jrun.servlet.JRunResponse.getWriter(JRunResponse.java:205)
at jrun.servlet.JRunResponse.sendError(JRunResponse.java:597)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:328)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
There is no line about a memory issue!
These errors happening on random request not ALL!! (arround 0.05%), and there is no real link between load and this... Our applications handle a lot of POST download, but like I've described before, error can occured on classic cfm page and static ressource...
What I mean with upgrade CF8 to CF9, is with our 10 other servers running on CF8, I've never see that 503 issue outside a real jrun problem (like a memory crash, restart, etc...)
@Carl:
Server is running on WIN2003R2SP2 32 bits OS (dual Xeon E5506, 4Go RAM). Here is the jvm.config arguments:
# Arguments to VM
java.args=-server -Xms1024m -Xmx1024m -Dsun.io.useCanonCaches=false -XX:PermSize=256m -XX:MaxPermSize=512m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars
Do you know if it should be possible to try old JRun connector used by CF8 ? -
Problems with drwin.exe after upgrading driv
After doing a online update for my audigy 4 drivers, i now get a message on shutdown saying drwin.exe has failed to inialtise and is unable to log off station. I then have a devil of time trying to get the pc to shutdown at all. Any ideas how to fix this would be greatly appreciated.
Just a email from support telling me do to a clean install, link below:http://ask.europe.creative.com/SRVS/...ve.com,case=72?also found a small hotfix for it. drwin.exe is the microsoft error reporting tool. this seems to be crashing as its trying to report an error with sound card drivers. i've managed to get it to stop crashing for the time being by doing the following:?open control panel, click on system and go to advanced tab. at bottom of this you will see a button that says error reporting, click on it. another wee box will come up, uncheck the one that says programs, (under the error reporting bullet button). not really a fix, more of a workaround. hope it hel
ps.
am gonna also try at some point to uninstall and then reinstall drivers from the disc i have and see if this solves it too. I dont install any other software other than drivers and audio console.Message Edited by gunhed27 on 2-29-20060:58 AM -
All printers disappeared after upgrade to Leopard
I made an upgrade to Leopard and all my production printers just disspeared under System preferences - print and fax.
It wasn't a big thing to reinstall 4 print drivers. Well, that is, not yet known what happened to my CS3's Acrobat 7's PDF printer yet. For the 3 others Xerox production RIPs, I just redid the install.
What I did is to use the new WINDOWS printer connector and this is great! It took me like 10 secs to set each of them. So easy and great improvements inside the printer installation. I've used the Xerox and Roland sites' PPD and there we go... all connected.
Great improvements but too bad they all dissapear after upgrade...Hello Mac Experts,
I recently upgraded from Tiger to Leopard and I too am having this same issue. After my upgrade was completed, I checked my printers and noticed that all my network printers were gone. I have never perform an OS X upgrade before and this is my first attempt, although the upgrade was successful but I was a bit surprised that all the network printers that I have were gone.
For those us either in a small SOHO this is no big deal, however, if you're in a big environment where you have a lot of machines this would be a big problem and would create a lot of unnecessary work and time wasted.
Have any of you Mac experts perform an upgrade from Panther to Tiger? If so, did you loose all your network printers that you have configured in System Preferences > Print & Fax
Could this be a bug in Leopard???? -
My IMac 21.5 mid 2010's HD is going bad on it, after upgrading to mavericks it slowed way down and after it shut off and now won't come back on, I call apple support and they told me to bring it in but the nearest store is about two hours away. They said I need it to erase my hard drive but I have too many family pics on it.
would Seagate Barracuda ST2000DM001 2TB Serial ATA Hard Drive - 7200RPM, 64MB, SATA 6Gb/s worked on it? I could replace the internal and get an enclosure for the original until I get the pics out of it?
Please advise, it's like five years of family pics I don't wanna loose them and I am worried.
Thanks
Al FlorezA Brody,
I really apprecate your very quick respond, Its too late to back up as of now, my hard drive wont load at all so I cannot follow your instruction to back it up. Learn a hard lesson but I will from now on following your link.
Also my hard drive it is not available to do the free exchange program.
I read the OWC instruction on how to replace the drive I was just wondering if the 2TB would work on it instead of the 1 TB they offer, I specifically asked for the Seage Barracuda because I had great experiences with it on PCs.
Again, Thank you -
Problems with set up disc after upgrading hard drive
I am having problems starting up my Macbook after upgrading the hard drive from 80GB to 160GB. The new hd is SATA, a WDScorpio. The pins on the end look the same, and I've had no problem with the physical install. When I go to start up the Macbook, I get a gray screen and the "flashing manila file w/a question mark" icon. I load the disc while holding down the "C" key, and all that happens is the disc gets ejected. What am I doing wrong? I also have my hd backed up w/time machine in an external hd. Any ideas?
Turns out, my problem is a malfunctioning optical drive. My Macbook couldn't read the set up disc. This is the second time in a week that I have had this Macbook into the apple store for warranty repair work. Last week, It was a defective VGcable. Each trip to the Applestore is 115 miles round trip from where I live. I tried to get Apple to give me a new computer, but no dice. I even had a district manager in Boise Idaho hang up on me. It's too bad when they know they have a product which everyone loves, and wants to use. They can set the terms. How many things must go wrong before they just replace the @#$# thing? I bought the Macbook Feb 12th, so it's not that old. I have handled it with the utmost care. Anyway, I've tasted the forbidden fruit, and will continue to use Apple products. Thanks for your help. I'll probably have a much easier time with a computer that works. (knock on wood)
-
Why my MBP optical drive left to work after upgrade lyon ?
why my MBP optical drive left to work after upgrade lyon ?
somethinh about firme ware ?
i need a solucion and a explanation
becouse before the upgrade works perfect ?
somebody have´s the same problem !
i wiil go to the deep whit that , i dont like gifth my money to people selling bad products!!haha! my native language?
if you only speak English I guess, but hey that part of the superdrive stopped working on my MacBookPro, when I did the upgradre to Lyon? so they understand or not?
thanks. -
After upgrading to 7.6.1, drive letter changed - can't restore
After upgrading iTunes to version 7.6.1 on my Vista, none of the files could be played, giving me a "file not found". The music is still in the same old folder on my M-drive. Though, in the iTunes library file, the drive somehow was set to F, my DVD-drive.
I have tried consolidating, set/reset drive in settings, edit the library xml-file, but it still insist that my music is on the DVD. How can I restore the library without having to import all the music again?Found the solution. I had to move the library.xml out of the iTunes folder, find and replace all the entries of the wrong drive letter, and the import the XML to iTunes, making it a new library xml file. This makes all the song tagged as imported today, else everything seems to be fine.
-
After upgrading to FF 3.6.12 I can no longer view PHP pages from my hard drive.
After upgrading to version 3.6.12 I can no longer open PHP web pages from my hard drive. When I create or edit web pages I view them from my hard drive first before uploading, as many webmasters do to look for errors before taking them live.
I can view PHP pages online, but from my hard drive it just spawns endless empty tabs. Instead of just opening the page it asked me what to open it with, thinking the PHP web page is a script.
It was working fine before the upgrade. I had a page open that I wanted to edit, which it reopened when my browser restarted.
Then I edited the page. All I did was add a link to it. Then I hit the refresh button to see the change and instead of reloading the page, FF asked me what to do with the PHP script, prompting me to save it or choose what program to open it with.
I selected to view it with FF and it just spawned endless tabs. They wouldn't stop. Had to shut down FF and it probably had 40 tabs opened with nothing on them. I tried other PHP pages from my hard drive that opened fine before, but it did the same thing with them.
I tried finding help online and I see others have had the same problem, but no solution was offered that worked. I tried rebooting, same story, it wants to know what to do with the PHP script.
I'm being forced to use another browser, so I'm going to go download Chrome now. If this probably isn't fixed soon I'll simply give up on FF. It's not worth the aggravation. I can't tell you how much TIME I've wasted today -- HOURS.
Very disappointed.Thanks for the reply. It doesn't have to process the php, it just has to show the HTML content. It did that just fine before the last upgrade but won't now.
I've seen that page you referenced: http://kb.mozillazine.org/File_types_and_download_actions.
It doesn't help. The things it says to look for aren't there for me, specifically:
browser.download.pluginOverrideTypes
plugin.disable_full_page_plugin_for_types
I followed the rest of the instructions but it didn't help.
I did get it to quit opening tabs, instead it prompts me what it should do with the file every time now. What it should do, and used to do, is open the php page and display the HTML content.
Any other ideas? -
I can't set up iCloud drive on my iMac after upgrading to Yosemite
I can't set up iCloud drive on my iMac after upgrading to Yosemite - iPhone and iPad are updated but both say my iMac isn't (even though it is running Yosemite).
My iMac is OS X Yosemite 10.10 (14A389), memory is 4 GB 1333 MHz DDR3 and storage capacity is 273.64 free of 999.35 GB.
When i go to System Preferences and click on iCloud. The iCloud Drive section is greyed out and says setting up and a spinning pin wheel. It stays like this the whole time. I have tried restarting the computer. i amanita sure what else to do to make it work. Any suggestion would be great.I found another way to correct this...
1) Select Message, then go to Preferences,
2) a window will appear with 3 options, General, Accounts, Audio Video, don't be surprised when you see a video of yourself, your camera just turned on.
3) Select Accounts (you may have several here)
4) Select the account that has "iMessage" under the account name. This may likely be your Apple ID ****@me.com
5) Look at what is checked under the "You can be reached for messages at:"
6) Select the one account (or more if you like) and deselect the others
7) Close the window and the problem goes away.
I'm not longer getting my sons iMessages. -
Yikes! After upgrading my iPhone 3GS to iOS 5, I lost my Contacts, calendar entries, and Notes (100+) on my iPhone (3 years old). How do I retrieve them? My last backup/sync to iTunes acct was Sept 18 but yesterday's backup bombed due to lack of space on my C: drive.
This happened to me too but it was really all there. Go to your calendar, click on calendar in the upper left hand corner, click on show all calendars, click done in the right upper corner. Everything should show up!!!
I was super thrilled. Hope this works for you!! -
After upgrading from Windows 7 Home Premium to Windows 7 Enterprise (x64) Service Pack 1 (build 7601), I cannot find working drivers for my ethernet controller. The desktop is a HP Pavillion, Model
No. p6710f. I located the drivers on HP's website, but Windows 7 Enterprise
is not listed as compatible. Compatibility list:
Microsoft Windows 7 Home Basic (64-bit), Microsoft Windows 7 Home Premium (64-bit), Microsoft Windows 7 Professional (64-bit), Microsoft Windows 7 Ultimate (64-bit), Microsoft Windows 7 (64-bit)
The original driver (according to HP's site) is a Realtek PCIe Family networking controller, Version:7.26.902.2010 Rev. A.
I tried contacting HP, but apparently I voided their warranty once I upgraded to Windows 7 Enterprise. I do not have a support plan with Microsoft because the operating system was purchase through TechSoup (nonprofit). I greatly appreciate your help;
let me know if you need more information.On Fri, 15 Jul 2011 21:36:53 +0000, microsoft_questions wrote:
After upgrading from Windows 7 Home Premium to Windows 7 Enterprise (x64) Service Pack 1 (build 7601), I cannot find working drivers for my ethernet controller. The desktop is a HP Pavillion, Model No. p6710f. I located the drivers on HP's website <http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-89905-1&cc=us&dlc=en&lc=en&os=4063&product=5049513&sw_lang=>,
but Windows 7 Enterprise is not listed as compatible. Compatibility list:
Microsoft Windows 7 Home Basic (64-bit), Microsoft Windows 7 Home Premium (64-bit), Microsoft Windows 7 Professional (64-bit),
Microsoft Windows 7 Ultimate (64-bit), Microsoft Windows 7 (64-bit)
Windows 7 Ultimate and Enterprise are essentially the same with regard
to their software. Only the license is different. So if it's
compatible with Ultimate, it's also compatible with Enterprise.
Ken Blake, Microsoft MVP -
Time Machine backup on external drive no longer working after upgrade to Yosemite
Can anyone explain why, after upgrade to Yosemite, Time Machine is no loger working? Backup on external drive stops few seconds after it has started. What can I do?
Welcome to Apple Support Communities
Try running a DVD Lens Cleaner disc through it, a little bit of dust or dirt is all it takes to throw them out and it might just be co-incidental with the upgrade. -
After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer working
After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer recognizing discs. When I first put a disc in the drive runs for a bit and then stops. I've tried updating the driver but it says it has the most current driver. Under manage, it does not show any error codes and it says it is working correctly. I've looked at the regedit and it does not have any of upper and lower filters. I've tried disabling, rebooting, and reenabling. What am I missing? Another issue I've had since upgrading is that my network adapter needs reset several times a day in order to remain connected to wifi.
Hey hvbnfrgvn,
Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
I hope this information helps, please keep me posted on how it goes.
Best of luck and have a great day!
I worked on behalf of HP.
Maybe you are looking for
-
Getting "insert blank disc error" , cannot burn CDs anymore. Tried new/other CDs, same issue. Anyone have an answer to this?
-
"Free Space" Partition disaster on new Mountain Lion iMac
"Help" I just received a new 27 inch iMac as a replacement for my old machine, which apparently disntegrated during warranty. In setting it up, I tried to create a small partition on the hard drive to run a Linux distro for testing purposes. It seems
-
Can anyone explain the distortion I'm seeing in the album images in Cover Flow? I don't have very up-to-date video card, but it doesn't /look/ that complicate to render. Screenshot: http://www.aengblom.com/ars/distortion.JPG Windows XP Pro
-
Two Step Authentiction Is it available in Bulgaria ?
is two step authentication available in Bulgaria ? Thanks
-
I'm having a problem because I am working with the Sample Editor. I've edited the sample down to what I want to use, but when I place it on a track I don't hear anything. I place it on the instrument that says drag and drop samples kit. I can hear it