Bad domain name

Hello.<o:p></o:p>
New client called me about a problem with web pages. He has a windows server 2012R2 environment with ad domain that is called very unfortunately
as art.pl which is a public domain suffix. Now all webpages that are called something.art.pl are not resolved to Ip addresses. Is there a way to force the dns servers to forward dns queries for a primary authoritative zone if it does not have proper entries?
<o:p>Thank you for your help,</o:p>
Marcin Rabiniak.

Hi Friend,
The easiest way is to give it some other domain name which does not exist in your network if you do not want your switch to participate in any VTP domain which exist in your network.
Switch default is in no-management-domain state.
After the switch leaves the no-management-domain state, it can not be configured to re-enter it until you clear the NVRAM and reload the software.
So if you completely want to get rid of it clear NVRAM and reload the software.
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12120ea2/3550cr/cli3.htm#wp1878369
By my recommendation is if you put into any domain which does not exist in your network it is same as no-management-domain state because it will not participate in your existing VTP domains.
HTH, if yes please rate the post.
Ankur

Similar Messages

WLST setting domain name and ListenAddress attribute

using weblogic 9.2
just getting started with WLST and ran into two issues:
1) want to state the ListenAddress for both the adminserver and application servers with the script below:
cd('Servers/AdminServer')
set('Name', 'adminserver')
set('ListenAddress', 'localhost')
set('ListenPort', 7001)
cd('/')
create('appserver1', 'Server')
cd('Server/appserver1')
set('ListenAddress', 'localhost')
set('ListenPort', 7003)
....however get the error "Property Listen address of Server appserver1 is invalid. The server has the same combination of listen address and (default) port as other server" which clearly isn't the case since the ports listed above are different.
2) second issue is more of a complaint that the domain name is automatically derived from the domain directed in the writeDomain command. want to specify another domain name. is this possible?
thanks / matthew

Ok update changing the hostname in the field does NOT allow me to edit the .local part. In fact it converts Steve.mydomain.net.local to Steve-mydomain-net.local.
But I got my windows workgroup changed and I am showing up with the correct workgroup name from my other servers.
Also, lets say you only have a couple of computers on your home network right? So dedicated dns is kind of overkill especially when most of them are laptops rebooting all the time.
Well, your mac os x box has a hosts file. /etc/hosts as in if you want to edit sudo vi /etc/hosts. So you keep the computers pretty much in sync from those files.
I was afraid the information would not be persistent across a reboot. It was.
So, two out of three ain't bad. I read in the server forum its a pain in the ***. I was almost thinking of doing the hostconfig trick but I saw an Apple bulletin saying do NOT do that.

IWeb Domain Name Question, Please Help

I created an iWeb website hosted on my .Mac account.
I forwarded my personal domain name, so that the website uses the domain <www.JohnPositive.com>.
But once it gets to the site, the domain in the URL line changes to the long iWeb name of <www.johnpositive.com/jp/CASA.html>.
What's bad about this is that I have a nationwide ad coming out that advertises the webpage of my site <www.johnpositive.com/students>, but the problem is that .Mac doesn't recognize this site, because it's changed to the long iWeb name of <www.johnpositive.com/jp/students.html>.
How do I convert that URL back to a shorter URL, such as, <www.johnpositive.com/students>?
I appreciate anyone's help on this. Must I create a redirect page? Are there some settings I'm missing?
-Jan

the url instantly changes and is long.
This is the way CNAME pointing works with .Mac. If you like you can make things shorter by shortening the names you give your site and pages.
Your "url", namely what people need to type to get to your site, is of course just the short version. What appears in the browser address bar is really irrelevant, but if it matters a lot to you, then you can undo everything you did for CNAME and switch to ordinary url forwarding/masking. With that, for every page on your site only www.myname.com will appear in the browser address bar for every page.

Domain name and Mobile me host question regarding user name and password

I am waiting for my domain name from godaddy to forward to my mobile me website. When I typed in my website to see if it launched, I get a screen that says "the server www.marysmith.com at me.com requires a username and password. And then there is a prompt to enter my username and password.
Have I done something to prompt or lock my website? It is hard for me to tell, because I am still waiting for the domain name to connect to my mobile me website, but I have done this before and never got this screen. Additionally, I do enter my mobile me password and then I it connects me to the mobile me home page. Not sure if that is good or bad. Thanks for any help!

The URL - http://www.marysmith.com/ - is working for me. Empty your browser cache and try again.

Resolving arabic domain name in Solaris DNS server

Hi..
I just quickly want to know how can i define arabic font domain name to get resolve in my DNS server?
I tried to put entry with arabic name but editor making it abnormal, i recently get arabic locale installed on server through north Africa region. Locale is now showing me "AR" ..
Thank you

Sorry my bad.... slight mistake in my question...Here is my corercted query--
After successfully connecting to the internet, when I do NSLOOKUP on the DC, the DNS doesnt resolve my internal domain/site but instead resolves external sites on the internet.
My computer FQDN is nri.wwe.com
Domain dns name is wwe.com
The above should get resolve internally but it searches on the internet.
This is how it should work
& it works perfect when I disable the other NAT network adapter (i.e. disable internet connectivity on my virtual DC)
C:\>nslookup nri.wwe.com
Server: nri.wwe.com
Address: 192.168.1.11
Name:    nri.wwe.com
Address: 192.168.1.11
But when I again enable internet connectivity, this it what happens.
C:\nslookup www.wwe.com
DNS request timed out.
    timeout was 2 seconds.
Server: UnKnown
Address: 192.168.12.2
DNS request timed out.
    timeout was 2 seconds.
Non-authoritative answer:
DNS request timed out.
    timeout was 2 seconds.
Name:    www.wwe.com.nsatc.net
Address: 64.152.0.124
Aliases: www.wwe.com
And when I again nslookup, this is what I get,
C:\>nslookup www.wwe.com
DNS request timed out.
    timeout was 2 seconds.
Server: UnKnown
Address: 192.168.12.2
DNS request timed out.
    timeout was 2 seconds.
DNS request timed out.
    timeout was 2 seconds.
DNS request timed out.
    timeout was 2 seconds.
*** Request to UnKnown timed-out
Now this 192.168.12.2 is VM assigned DNS via VM Natting with its own DHCP. If we do it manually, none of the virtual machines can connect to the internet. So I cannot fiddle with it anymore as I have already that as well.

Just bought some domaine names, but can't see them. they are redirected. best guess it is something embedded in firefox. i can't see anything though. help!

I bought some domain names from Godaddy. when i type the name into my firefox address line, instead of going to the parking page at godaddy, where it should go, it gets redirected to searchpagefix and there is a message on the side that says looksafe has blocked a hijacking page, etc.. i've spent hours on the phone with godaddy. they say the problem is not on their end. they see my domain name (peter-maloney.com) on their parking page. i spent hours on the phone with Norton support, my security software. They ran tests and diagnostics and found nothing. I downloaded ad-aware and ran that, nothing. I looked for looksafe to uninstall, etc. and it doesn't show up anywhere on my windows 7 machine. any suggestions? did this looksafe thing somehow get embedded in firefox? do i need to reinstall firefox? would i lose all my favorites?

Bad redirects can result from a variety of causes, including (1) system level malware, (2) system level settings changes, (3) bad Firefox add-on, (4) Firefox settings changes, (5) other (depending on the nature of the redirect).
Here's what I suggest for tracking it down:
(1) Open the Windows '''Control Panel''', Uninstall a Program. After the list loads, click the "Installed on" column heading to group the infections, I mean, additions, by date. This can help in smoking out undisclosed bundle items that snuck in with some software you agreed to install. Take out as much trash as possible here.
(2) Then, in Firefox, open the '''Add-ons page''' using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Plugins. Set nonessential and unrecognized plugins to "Never Activate".
In the left column, click Extensions. Then, if in doubt, disable (or Remove, if possible) unrecognized and unwanted extensions.
Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
(3) Check your '''Firefox connection setting''' in the Options dialog here:
"3-bar" menu button (or Tools menu) > Options > Advanced > Network mini-tab > "Settings" button
The default of "Use system proxy settings" should piggyback on your Windows/IE "LAN" connection settings, but you also can try "No Proxy" to see whether that works better.
(4) Search for remaining issues with the '''scanning/cleaning tools''' listed in our support article: [[Troubleshoot Firefox issues caused by malware]].
Are you able to get rid of the unwanted redirects?

Oracle Messenger Console"Bad user name or password, Please renter your use"

Hi,
I faced with problem with Oracle Messenger Console. I can not connect to
my Portal Server (RTC Serevrice).
I have installed Oracle Messenger to my Windows Operating System
and It should communicate with My Oracle Collaboration Suite 10g Installed in Linux Os
But I receive following Error:
Sign in failure. "Bad user name or password, Please renter your user name or password"
I should mention that I enter my user name as following format:
<username>@<domain>
also
I have run rtcctl getproperties command to ensure information about my domain.
Any comment and help will be appreciated in advance.

FYI: This topic is in the wrong category, should be under "Primavera P6 Enterprise Project Portfolio Management". See if there is a way to move it and you may get more exposure.
I re-read your question and it is unclear to me what DB platform you are attempting to run on. Is this Microsoft SQL Server or Oracle. Also, please specify the version.
If Oracle:
-Are you able to TNSPING your Oracle XE instance?
-If you can TNSPING it, try connecting from the command prompt via SQLPLUS:
sqlplus admprm$pm/password@XE
Also worth noting, P6r8 admin functions have been moved out of the desktop client and into the Web so you will be limited in what you can demo without installing the web component.
Edited by: cruz878 on Jan 17, 2011 10:28 AM

Changing Domain Name. Any affect on SQL DB?

Hello,
Our main file server went down, and we are having to set up a new server as the domain controller under a new domain name. If I change the domain name that the SAP server is on to this new domain, will it cause any problems?
All clients will be on the same domain to the same server, and the network name of the SAP server will be unchanged, will this be ok? From what I understand, changing the server name is what messes up SQL really bad, and we are not doing that, so hopefully we will be good.
Thanks for your answers.

Hi IndianaRick,
We have the same scenario but Im still on the process, very clueless on what will happen if the domain name will be changed.
1. Is it true that changing DOMAIN will ONLY affect the license key other than this the system will be OK?
2. Im worried that they might be dependencies on the domain that the system will crashed down. True?
Please guild me on this.
Thank you.
Joel

TS3988 Reason: Illegal host/domain name found

Why am I suddenly getting the error:
This report relates to a message you sent with the following header fields:
Message-id: <11EBCE80-CD02-4B37-9CE4-641CED12AC92 @icloud.com>
Date: Mon, 15 Apr 2013 18:23:06 -0400
From: Charles Kinnear <chkinn*** @icloud.com>
To: "bchoteldire @celebrationcl.com" <bchoteldire*** @celebrationcl.com>
Subject: Re: Reference
Your message cannot be delivered to the following recipients:
Recipient address: bchoteldire*** @celebrationcl.com
Reason: Illegal host/domain name found
Recipient address: ckinn*** @celebrationcl.com
Reason: Illegal host/domain name found
<Email Edited by Host>

It's a really bad idea to post email addresses - it's an invitation to spam - and I've asked the Hosts to remove them.

Is it possible to restrict the ability to e-mail a pdf outside a specific domain name?

Hello,
I am trying to find a solution to a friends problem. She has a quarterly publication that she sends out to big banks and financial institutions. Recently she has had some problems with press leaks. I am trying to find some security options for her however the task is difficult. Because these institutions have firewalls I am not sure encrypting or tracking is the right answer because the publication might not make it through. She wants users to be able to print the publication because many of the readers are older and prefer to read during their commute and at home. Essentially I am looking for any ways to make readers think twice about sharing the information. I thought if I could restrict e-mail to a specific domain name that would help this way users can only e-mail within their specific company. If any one has any suggestions please feel free to share.

Thank you Todd, I was able to get it to work but I do have a few more questions...
1) When I tested this, at the top of the message, before any of the text I created, this showed up: This is a multi-part message in MIME format. --------------040406040801080102080500 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit
2) After the signature line, this showed up: --------------040406040801080102080500 Content-Type: image/jpeg Content-Transfer-Encoding: base64 Content-ID: /9j/4AAQSkZJRgABAQEAYABgAAD/4QAiRXhpZgAATU0AKgAAAAgAAQESAAMAAAABAAEAAAAA AAD/2wBDAAIBAQIBAQICAgICAgICAwUDAwMDAwYEBAMFBwYHBwcGBwcICQsJCAgKCAcHCg0K CgsMDAwMBwkODw0MDgsMDAz/2wBDAQICAgMDAwYDAwYMCAcIDAwMDAwMDAwMDAwMDAwMDAwM DAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAz/wAARCAC5ApUDASIAAhEBAxEB/8QA HwAAAQUBAQEBAQEAAAAAAAAAAAECAwQFBgcICQoL/8QAtRAAAgEDAwIEAwUFBAQAAAF9AQID AAQRBRIhMUEGE1FhByJxFDKBkaEII0KxwRVS0fAkM2JyggkKFhcYGRolJicoKSo0NTY3ODk6 Q0RFRkdISUpTVFVWV1hZWmNkZWZnaGlqc3R1dnd4eXqDhIWGh4iJipKTlJWWl5iZmqKjpKWm p6ipqrKztLW2t7i5usLDxMXGx8jJytLT1NXW19jZ2uHi4+Tl5ufo6erx8vP09fb3+Pn6/
(It was actually much longer than that)
Is there anyway that I can get that to go away? I obviously would prefer a nice, cleanly formatted e-mail to be sent just like I would send if I were creating it on the spot.
Thanks,
Evan

Postfix relay=none, ... status=deferred (Host or domain name not found...

Hi,
I actually posted this question 2 weeks ago but under the wrong topic. So, first of all wanted to apologise for double-posting... but since no one replied, I thought I'd try again under the right topic.
I've been trying to solve this all day today (that was Feb 26th). I used to be able to send emails but for some reason it does not work anymore. At first I thought it was a problem with php (I use entropy pack php 5.2.6) but after searching the topic, I think it is a problem with my network. BTW OS is 10.5.5 and Postfix version 2.4.3
First of all, after computer restart, I don't think postfix starts automatically
Running 'sudo postfix start' gives me:
postfix/postfix-script: starting the Postfix mail system
Looking at '/var/log/mail.log' I find:
Feb 27 12:51:04 AMs-MBP postfix/qmgr331: AA70A7A7C77: from=<[email protected]>, size=842, nrcpt=1 (queue active)
Feb 27 12:52:19 AMs-MBP postfix/smtp456: AA70A7A7C77: to=<[email protected]>, relay=none, delay=3437, delays=3362/0.02/75/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=email.com type=MX: Host not found, try again)
Running 'sudo postfix check' does not give me any errors
Checking my '/etc/resolv.conf' it has nameserver 192.168.1.1
Running 'ifconfig | grep netmask | grep -v 127.0.0.1 | awk {'print $2'}L' gives:
192.168.1.5
Checking http://switch.richard5.net/2006/08/19/fatal-open-lock-file-pidmasterpid/ and running 'launchctl list' gives me a long list but no item matches org.postfix.master
Running 'ps aux|grep postfix' gives
AM 546 0.3 0.0 599820 468 s000 S+ 1:41pm 0:00.00 grep postfix
_postfix 331 0.0 0.0 599816 824 ?? S 11:56am 0:00.04 qmgr -l -t fifo -u
root 329 0.0 0.0 600784 752 ?? Ss 11:56am 0:00.11 /usr/libexec/postfix/master
_postfix 519 0.0 0.0 599768 752 ?? S 1:36pm 0:00.01 pickup -l -t fifo -u
Running 'postconf inet_interfaces' at first gave me
inet_interfaces = localhost
which I changed to All in '/etc/postfix/main.cf'
I looked at http://www.postfix-book.com/debugging.html
Running 'telnet localhost 25' gives me
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying fe80::1...
telnet: connect to address fe80::1: Connection refused
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
220 AMs-MBP.local ESMTP Postfix
quit
221 2.0.0 Bye
Connection closed by foreign host.
But running 'telnet 10.1.2.233 25' gives me
Trying 10.1.2.233...
telnet: connect to address 10.1.2.233: Operation timed out
telnet: Unable to connect to remote host
Running 'ping 134.169.9.107' takes a long time. After a while I stop it and get:
PING 134.169.9.107 (134.169.9.107): 56 data bytes
^C
o
+ 134.169.9.107 ping statistics ---
28 packets transmitted, 0 packets received, 100% packet loss
I have not idea what the problem is and/or how to fix it. I know the messages get to the postfix daemon but for some reason they do not continue on their way.
Please, does anyone have an idea of how to fix this?
TIA,
Elle

Dynamic IP addresses with DynDNS Updater (or equivalent) makes it pretty darned reliable, particularly if you buy DynDNS' Mailhop Forward service, which prevents the likes of roadrunner.com and aol.com from blocking mail coming from your server just because it lives in dynamicIP-land. Way cheaper than paying your ISP extra for a static IPA, too, and totally acceptable for low-volume, residential-based servers for personal not-for-profit use.
Regarding reliable delivery to a dynIPA server, you are only at risk of non-receipt for perhaps a few minutes immediately following when your ISP rotates your WAN IPA, until DynDNS Updater (or equivalent) updates the DynDNS (or equivalent) servers with your new WAN IPA. But that's really not a problem because I think all, well, okay, most, smtp servers will queue for a redelivery attempt if the initial delivery attempt just happens to occur at that time.
I wouldn't suggest this practice for high-volume enterprise-class servers or for people trying to run a bootleg mail server business for profit (besides, the ISP would shut it down as an abuse of terms of service, anyways), but for low-volume, residential-based servers for personal use and enjoyment, which I suspect is the case for the O.P., I can't say that I find anything unreliable about my dynamic IP-based mail server.

Application is not working when changing of oracle server domain name

Hi friends
We decided to change oracle server domain name due to some reason .. we changed the domain name but application running on the other server cannot connect to this domain i don't know whats the problem . I change the enterprise manager ( emca -config dbcontrol db -repos recreate_) according to the new domain but some of the future not working like date,etc. can anyone help me how to rectify it plz.

Mohd khalid wrote:
Hi friends
We decided to change oracle server domain name due to some reason .. we changed the domain name but application running on the other server cannot connect to this domain i don't know whats the problem . I change the enterprise manager ( emca -config dbcontrol db -repos recreate_) according to the new domain but some of the future not working like date,etc. can anyone help me how to rectify it plz.I am really confused that what's not working? What I have understood is that you recreated the EM repository. So where does "some of the future not working like date,etc." come into it? Are you checking date from EM ? Which application is not working, your application or EM or both or somethingn else? Tell us the complete version, error information and also post the output of
emctl status dbconsoleHTH
Aman....

The publishing settings page does not open when I click on the domain name and the iWeb application will not stay on the dock.

Hello,
I have been trying to help a friend who is having problems publishing her website. (She has done so previously using Mobile me)
There seem to be a couple of things wrong with the application,
1 if I drag the application icon onto the dock, it won't stay there
2 I wanted to change where her site is published to (she has bought a domain name and has a hosting service now) but when I click on the domain name I do not get the "site publishing settings page" so we can't enter the new details. All that comes up is the main page of her website.
I would suggest uninstalling and re-installing Iweb, to see if that clears the problem, but as Iweb came pre-installed with her Imac, I am not sure that we can do this.
Any ideas please?
she's using and imac 24 in (approx 4 years old) and running osx 10.5.8

NO - not correct. Even if you are still using iWeb 08, you can still publish to another host and not MobileMe. You do this by selecting the option 'Publish to a local folder" and this will publish the site to your desktop and you can then use an ftp programme such as Cyberduck to upload your site to your host.
MobileMe will not be here after the end of June, so you will have to find alternative hosting. They are not taking any new subscriptions.
On new Macs, iLife 11 is pre-installed, but only iPhoto, iMovie and GarageBand are included, not iWeb and iDVD. The Apple Online store is not selling the boxed version of iLife 11 any longer, so if you want to upgrade to iLife, then you'll have to look online at Amazon.com or Amazon.co.uk for a boxed set of either iLife 09 or iLife 11. Both contains iWeb 09, which is what you would want.

Reverse proxy to applications on a server by just domain names possible?

Hi All
I am looking for a solution to set up a single server, that hosts four J2EE web applications running on a Glassfish application server with just only one IP address.
When a user wants to use an application, he/she can just type URL without specifing port and path, and the corresponding web application will be displayed accordingly as shown below
http://sub1.domain1.com -- > webapp1 at port 9100
https://sub2.domain1.com -- > webapp2 at port 9200
http://sub1.domain2.com -- > webapp3 at port 9300
https://sub2.domain2.com -- > webapp4 at port 9400
I am wandering whether I could use reverse proxy of Sun Java System Web Server 7 to route the traffic from the domain names to their own application on Glassfish as shown above? I tried by creating two HTTP listeners to listen at port 80, and 443 respectively, but I could not access different applications based on domain names without specifying specifix path or port.
Is there any recommended resources or example of the mapping, or any other suggested solution?

Thank you for your reply nsegura. I created 4 different virtual servers as you suggested and it worked :)
However, I have a problem in reverse proxy base on path.
The scenario is below
I have an J2EE application that needs to be deployed in three different environment (production, training, testing). It
is the same application for three environments, so I want them to have the same context-root. I want to use Sun Web Server 7.0 to reverse proxy to the application in each environment based on path, not URL redirect. Example of URL are shown below
https://sub.domain3.com/app -- > http://localhost:9500 (with context-root /app)
https://sub.domain3.com/training/app -- > http://localhost:9600 (with context-root /app)
https://sub.domain3.com/testing/app -- > http://localhost:9700 (with context-root /app)
So far, it works if I set context-root of the application in each environment differently
https://sub.domain3.com/app -- > http://localhost:9500 (with context-root /app)
https://sub.domain3.com/training/app -- > http://localhost:9600 (with context-root /training/app)
https://sub.domain3.com/testing/app -- > http://localhost:9700 (with context-root /testing/app)
I am wandering whether there is a solution with Sun Web Server 7 that I can use to achieve reverse proxy of the same application in different environments without having to modifying context-root for each environment and use URL redirect?
I was thinking about using rewriting path with reverse proxy, but I did not see this function under reverse proxy tab.
Any ideas?

How do I use my own domain name with Mac server with iWeb

For a number of years I have had my own domain name that when typed into a browser it would redirect the browser to my site on the .Mac server. I hear with iLife ’08 I can have my own domain name hosted by .Mac so I know longer have to have the long addresses for each pages the I have now for my site (i.e. the http://web.mac.com/thewildhearts/WildheartPhotography/NatureGalleries.html). How do I go about getting my domain name (wildheartphotography.com) so that Mac will host it and do I need to notify the current host that Mac will be hosting my site now?
Thanks. I really appreciate the help I get from this forum.
Pat

It's very easy, really. You go to your domain control and redirect the address. IPower, for example points the domain name very easily: you just type in the URL of your site and it will point to your mac server.
I've used GoDaddy before and it is a bit more difficult to "point".

Bad domain name

Similar Messages

Maybe you are looking for