Bad DVD Playback on Computer

I have a G5 2.5 GHz running OS X 10.3.9 and when I make a video in Final Cut Pro, export it either as a reference or self-contained Quicktime Movie, drag it into iDVD and burn it, it plays fine on my home DVD player but on my G5, it has horizontal ripples that appear especially when there are camera movements (pans and tilts). These ripples are more obvious with full screen viewing - I have the 20" Cinema Display - which, after trying different encodings and iDVD preferences, has led me to think it's my DVD Player 4.0. I looked into downloading 4.5 and then 4.6 but I think those are Tiger only. Am I on the right track? Has anyone run into this? Do I have any options other than upgrading to Tiger? Thank you for your help.
Dan

I am having the oposite problem. My video on the mac looks fine, but when I burn it to DVD it has those horizontal ripples. I thought it was my DVD burner (a panasonic 103 from 2001) so I replaced it with an NEC 3550A....same problem.
Any suggestions?
Video was recorded w Sony Mini-DV camera
Edited on Avid Express Pro
Storage 180 gig Firewire drive
Exported as QT movie (to internal hard drive)
16-bit Integer (Big Endian), Mono, 48.000 kHz
DV/DVCPRO - NTSC, 720 x 486, Millions
iDVD 5.0.1
G4 867 w 1.12 GV SDRAM
OS X 10.3.9

Similar Messages

DVD Playback on Computer and Standalone-Player

Hi,
Since a lot of people here author DVDs professionally I wonder how you handle the quality-subject with your customers. Generally I wonder about the differences between standalone players on one hand hand on Computers or Laptops. Different monitors and especially different DVD Software players seem to have a major influence on the quality beside the qualityloss from scaling PAL or NTSC up to computer monitor resolutions anyway.
I already had 2 customers complaining abouth the quality (always on computer-playback!). Standalone-Playback is fine, but computer-playback gives some real bad results with DVD-SP authored DVDs.
I tried tweaking some of the settings in DVD-SP and checking colorlevels/optimizing my menu graphics in Photoshop... which made it a little better. Now one computer gives OK results in fullscreen-mode, the other one blurs like **** and the third one even gives unbelievalble pixelation in some parts of the picture (seems to dislike the colour red... and its not even a full tone!).
Now with these results, how do you handle complaints of customers who get real bad results on their hard/software??
And generally when authoring DVDs, which is more important for you ... standalone-playback or Computer/Laptop-Playback. This issue seems also pretty important for designing the menus, so I wondered why I rarely read about the problem?!
Karim

First of all thanks a lot for the quick replies.
@theshow:
I know that every project is different... at least it should be. In our case nearly every customer wants one thing that fits all to save costs... that is content-wise as well as for the medium its delivered on. Since DVD is the new standard most customers want DVD. Unfortunately most use the DVDs on their laptops for presentation, but also want to have DVDs to hand out to customers. This way its hard to get an optimal solution.
So in my case... the problem is mainly the menus that the customer wants for interactivity and technical details beside the movie on the DVD. Until I saw those awful pixelations I thought that would be a solution.
Now if I change to another way like clips with other codecs or Flash/Director-based Menus I basically get new problems like customers missing codecs and plug-ins, incompatibility between MAC/Windows machines? So I am trading better quality/resolution for perfect handling and a standardized medium.
Do you often work with any other interactive stuff like Flash/Director or HTML-based solutions in which you include movies? Basically it sounds like DVD-Menus for interactive content are a deadend unless the HD-Standard saves it soon.
@Silal:
Yes, I experienced the problems badly and it reminded me of the awful work webdesign used to be.
I don't know what to improve on my DVD menus, I work in PAL 768*576 compostion resized to 720*576 for the aspect ratio. No fulltone colours or full whites in the menus, no serif fonts and the DVDSP-Settings to software-based rendering and a constant bitrate of 7. Comparing to other menus I am not too far off qualitywise anymore, but the computermonitor display really screws it up and I wonder how to get this message to our customer and avoid in future projects.
BTW... I saw some still menus which looked even worse on computermonitors than my first ones and it looks like motion menus turn out best. Could that be true that motion-menus turn out better in MPEG2 than plain Photoshop-stills??
Karim

New computer tip : Getting healthy discounts on DVD playback and authoring software

Lots of times when a user purchases a new computer, the manufacturer includes OEM software to supplement the hardware that was purchased. OEM stands for Original Equipment Manufacturer. They can choose what features to include with your computer while disabling others. For most users, the included feature set is going to be enough to get the new owners feet wet about how their DVD Burner works, but what if you need more features then what is given? A great example is when I purchased a Compaq a long time ago. It had a feature limited version of NERO loaded on the machine. After registering the software, which I thought was required to use it, I was sent an email to buy the full version of the software for a discount. I was very skeptical. Then when I clicked the link in the email to see what the discount was , it was Nero Ultimate for $19.99! This was an upgrade version , however. but the discount was tempting! I bought it, downloaded and installed it, and within an hour I had 85 percent more features on my computer then what was included when I used the factory default software. So before you write off promotional emails as spam , listen to what they have to say. You can always opt out if you dont like it.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Or you can go the "free and open source" route.
DVD playback:
VLC
or
Combined Community Codec Pack + Media Player Classic
DVD authoring:
Not sure for Windows. There's dvdauthor + various frontends for Linux.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

DVD playback: screen goes black in full-screen mode

Hi. Having problems with DVD playback on 1 Ghz Powerbook G4 12 ". When trying to view in full-screen (or even sometimes in maximum) mode, screen simply goes black. Sound still works, but no visuals. As soon as I revert back to Normal size, visuals play fine.
Any ideas ? This is a problem which has developed rather than being with the machine since I bought it. Just for the record, I have 1.25 GB RAM installed and am running 10.4.5.

OK, if you see words, it's not your graphics card. Follow this knowledge base article. The BlackBerry desktop message suggests a corrupted device os. NOTE THIS WILL ERASR ALL DATA SI BACK UP AS POSSIBLE!
How to to recover a BlackBerry® smartphone after all other possible means of recovery have been exhausted.
Remove the battery from the BlackBerry smartphone.
Open a web browser and navigage to the following link.
Click Check for Updates.
Wait for the Device Connection dialog box to appear with no result for pin.
Connect the BlackBerry smartphone to the computer with the battery removed.
Press Ok when the PIN field is populated with the BlackBerry smartphones PIN number or PIN-Unknown is displayed.
Note: Some BlackBerry smartphones may be in a reset loop, which will cause the field to populate and depopulate. This is not an issue; pressing OK when the PIN field is populated will allow the process to move forward.
Select the appropriate version of BlackBerry Device Software and applications for the BlackBerry smartphone, click Next.
At the Review the following options before you begin dialog, insert the battery without unplugging the USB cable.
Press Install update.
1. If a post has helped you, show your appreciation by clicking Like at the bottom of the message box.
2. If a post has solved your question, please click ''accept as solution'' to verify your question has been solved.

DVD playback blurry with Kaffeine/Xine

Hi guys,
I wanted to watch my first DVD under Linux yesterday and I noticed that the image quality is really, really bad compared to watching the same DVD under Windows with PowerDVD.
DVD playback in Kaffeine with Xine engine is really blurry. Does anybody know what the reason could be? There's a lot of options for xine engine parameters in Kaffeine, but I don't have a clue about them. Any tipps appreciated.
I've also tried kmplayer, but the image there has small black horizontal lines in it, which looks really weird. I thinks that's called interlaced, right? I'm a total video noob. ^^
TIA,
Blackhole

[timetrap@darkstar ~]$ mplayer dvd://
MPlayer 1.0rc2-4.2.3 (C) 2000-2007 MPlayer Team
CPU: Genuine Intel(R) CPU T2060 @ 1.60GHz (Family: 6, Model: 14, Stepping: 12)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
115 audio & 237 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing dvd://.
There are 9 titles on this DVD.
There are 1 chapters in this DVD title.
There are 1 angles in this DVD title.
number of audio channels on disk: 0.
number of subtitles on disk: 0
MPEG-PS file format detected.
MPEG: No audio stream found -> no sound.
VIDEO: MPEG2 720x480 (aspect 3) 29.970 fps 8000.0 kbps (1000.0 kbyte/s)
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 720 x 480 (preferred colorspace: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b
Selected video codec: [mpeg12] vfm: libmpeg2 (MPEG-1 or 2 (libmpeg2))
==========================================================================
Audio: no sound
Starting playback...
VDec: vo config request - 720 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [xv] 720x480 => 854x480 Planar YV12
V: 0.3 2/ 2 ??% ??% ??,?% 0 0
Exiting... (End of file)
[timetrap@darkstar ~]$
For reference I am trying to play: Planet Earth; From the BBC; Disc 4
mplayer VERY briefly flashes up a window then writes Exiting. . .

DVD Playback Quality

My DVD playback (made with DVDSP & Compressor) looks Good on a 27" TV monitor, but when I play it on my 15" Powerbook, many of the images look soft. Why is this? Is there anything that can be done? It seems to contradict the logic of "smaller image=better resolution."
Thanks.

A TV monitor is interlaced whereas a computer monitor is pixel based. A dvd is bound to look good on a TV monitor as the DVD is interlaced as well. NTSC resolution is 720x480. Your computer monitor may have a reolution way above that. Hence the image has to be scaled and hence the softness. Try viewing it without zooming in and you will be quite happy with what you see.

Freezing within DVD playback

Having searched many forums for a solution to freezing on DVD playback (particularly with DVD players older than about 4 years) without success, I have isolated the issue to layer separation in Encore when building.
The solution I have discovered to get around this is
1. Create your video in Premiere Pro as normal.
2. Export to hard drive using Adobe Media Encoder and set Multiplex to DVD, Bitrate encoding to CBR for better final quality.
3. Import into Encore and create menus etc normally.
4. Build as a DVD Image to your hard drive with the following settings, irrespective of your file size, set size to 4.7GB, this turns off the Layer break options. Then set size to "Custom" then set custom size to slightly larger than you file. Make sure "side" is set to 1.
5. Press "Build". This will build an *.iso file to your hard drive without a layer break being inserted.
6. Import this file into DVD Shrink and shrink back to your hard drive as an *.iso file to fit a single layer DVD.
7. Double click this file to automatically open and burn a DVD using Nero. Make sure burn speed is 4x or less.
Good luck

Bill,
Thanks for posting your solutions.
I've found that three factors affect DVD playback most, and in this order:
1.) choice of media - Verbatim and Taiyo Yuden are highly recommended. Falcon gets good reviews, but is/was only available in US. Have never used it.
2.) burn speed - slower is always better (as you point out). Luckily, Encore allows one to choose a slow burn speed, based on one's selection of media and also the capabilities of the burner. I always buy the slowest media, that Verbatim, or TY offer at the time. I want SLOW.
3.) keeping the bit-rate at about 7MB/s. This one gets debated a bit, and many have never had an issue at 8MB/s - YMMV
Now, my workflow is a tad different, as I always Export from PrPro as a DV-AVI Type II elemental stream (Video-only, no multiplexing obviously) and AC3 DD 5.1 SS Audio-only (or PCM/WAV 48KHz 16-bit, if I'm not doing 5.1 SS with the SurCode encoder). The DV-AVI is Imported into Encore as a Timeline, and the AC3 (or WAV) is Imported as an Asset. The Audio is dragged to the respective Timeline.
Unless I have some real need for bit-budgeting, I let Encore Transcode on Automatic. Even if one uses the above Assets and requires bit-budgeting, you can still set up the Transcoding manually, or can Export from PrPro as an MPEG-2 with the necessary settings. I strongly recommend not using any muxed files as Assets in Encore. Some will work, but many just flat fail.
So far, my method has yielded several hundred Projects with almost 2000 DVD's Burned. Not one has ever come back. Now, each Project gets checked with a DVD RW "test," and then the first DVD -R, or +R gets run through 5 different machines, plus the computer, before delivery, but still no returns, and some of my clients have some pretty old gear. For my testing, I use several brands of players and the models range from a pure esoteric down to a re-branded discount store cheapie. If it plays on all of these, I ship it out the door.
Appreciate the posting of your workflow,
Hunt

Best Export Settings for DVD burning and Computer viewing

Hello,
I am trying to export a 1 hour video that I need to be compatible with standard DVD players as well as viewable on any computer.
Original footage was shot with a Canon 5d Mark ii in 24fps.
I have done all of my editing in Premiere Pro CS6. From there, I exported a high quality file to bring into Media Encoder (for trials of best output). My master file from Premiere was exported with the Preset MPEG2. The only thing I changed in the preset was VBR from 1 pass to 2 pass.. This gave me a 6.2 GB file.
I then brought that file into Media Encoder where I have tried the following presets:
MPEG2-DVD - Match Source Attributes
MPEG2-DVD - NTSC 23.976fps Widescreen High Quality
MPEG2 - HDTV 720p 23.976 High Quality
MPEG2 - NTSC DV High Quality
These settings have encountered various issues.. some have significant banding, but most importantly, none of them will play on my DVD player when I burn them to a disc.
The discs I am using are Sony DVD-RW with a 4.7GB capacity.
Where am I going wrong here? From what I've read, the format needs to be MPEG2 to be viewed on DVD... Sorry if I sound ignorant! This stuff is tricky..

First off, don't export your timeline and then take the result to AME to re-encode, this is compressing your video twice and degrading quality (not to mention takes extra time and hard drive space). Always export direct from Premiere to Media Encoder. If you must use an "intermediate" file as part of your workflow, perhaps to archive a completed video that might later be exported to other formats, then use a lossless codec such as UT or Lagarith (free downloads).
For DVDs, you MUST use "MPEG-2 DVD". Other forms of MPEG-2 are not appropriate, as the official DVD specification requires that the MPEG-2 file has certain attributes. Not recommended to use "Match Source" for ANY export, just choose an appropriate setting as needed.
This should be correct for your application - MPEG-2 DVD > NTSC 23.976fps Widescreen High Quality
If you want to encode a DVD file over 1 hour in length, then you will need to adjust the encoding bitrate so the resulting file will fit the disc. Rule of thumb is 560/minutes = bitrate, but you might round down the result a bit to allow for menu overhead and such, depending.
Once you export the "MPEG-2 DVD" file, you can NOT simply burn that file to DVD media. That is only creating a DATA disc and it will not be playable in a DVD player (though a computer or PS3/PS4 may work since they can play most media files). To make a DVD that works in all DVD players (and meets the spec), it MUST be "authored" in a program like Adobe Encore. This compiles your content and menus and all that and then writes the result to the disc in certain way so that DVD players can read the disc. If you open any DVD on your computer, you will see a folder called "VIDEO_TS" and inside that there are .vob files and others. That is a proper DVD. And once you have a proper DVD, you can't simply copy the VIDEO_TS to another disc (as DATA), you must tell the burning software to create as a "VIDEO DVD" and not DATA, or it again won't be readable in a DVD player. Very picky spec, sorry.
When using AME to export MPEG-2 DVD, it will create two files, audio and video (.m2v and .wav), you will then Import both of those into Encore together. Note that you CAN import other formats into Encore, such as .avi but Encore will then transcode that to the correct MPEG-2 format anyway, so best that you take charge and create the right media in the first place in AME before you get to Encore.
EDIT: In AME, any time that your source is higher resolution than the destination, such as HD to DVD, you can check the "Max Render Quality" button in AME to provide the best downscale quality.
EDIT 2: I see you're using DVD-RW media. That is fine for experimenting, but for delivery to clients always use good quality DVD-R or DVD+R media. DVD-RW may not have the best compatibility with players and costs more anyways. DVDs are so cheap now that I just proof to DVD-R and toss the bad ones, up to you.
Thanks
Jeff Pulera
Safe Harbor Computers

Best export settings for HD video playback on computer?

I have shot my video on 1080p witha DSLR and edited it in premiere pro. I exported the video in .mp4 format.
Now i imported the video in after effects and added loads of animation. I want to export it to the best quality for playback ON COMPUTER ONLY. Which is the best export settings for this purpose.
I rendered it in .avi and my 12 minute video had a size of 55GB after render and did not play smoothly in the computer.. PLEASE HELP WITH THE BEST SETTINGS for the above purpose.

You messed up. You should NOT have rendered MP4 out of Premiere to use in AE. You're adding compression and quality loss in between stages. BAD video person!
The easiest thing to do would be to import your Premiere project in AE. That way it can use the original footage too. If, for some reason, you can't do that, you should render a lossless file out of Premiere. Speaking of lossless files, that's what you rendered out of AE. This page explains your large AE file issue.
Anyway, take that large file you render out of AE into the Adobe Media Encoder and render out your final compressed file. Either H.264 or WMV should work well for playback.

Is the DVD playback of poor quality?

I'm still miffed by the quality of the dvd playback. We have dvd players both in a pc, xbox, ps2 and stand along units. Yet somehow the one on my imac looks really rough. Is this more down to the really new hardware? I still have have the same full screen dvd playback glitch on my replaced intel imac so dont know where to turn to.
Sarfraz

I don't think the problem is the dvd player, but the resolution of the monitor. When you stream hi def trailers, it looks awsome. The resolution of the mac monitor is higher than a hi def television. You are not seeing a limitation of the hardware, but the limitation of the source dvd itself. My cable company has some analog channels mixed in with the digital ones and a hi def tv will make a bad picture look worse. The highest settings on hi def tv's is 1080. If you look at the display settings on the mac, you are at 1440. That's a significant difference.

DVD playback stutters, freezes

I made a DVD from old family movies as a Christmas present for my siblings. I used iDVD to make the disk image, converted it to an ISO file on the Mac using OS X's Disk Utility, and burned it on my PC. (My Mac doesn't have a Superdrive, so I used Nero to burn the ISO image on my PC, and did a bit verification when it was done to make sure the burn was good.)
It plays fine on the Mac, but on a consumer DVD player, the disc plays for maybe 20 minutes, then the video starts to stutter, and eventually the DVD player makes clicking noises and stops playing. The same disc will play longer in a PC, but it eventually stops there, too. The slide show part of the disc doesn't play at all on the DVD player, and plays poorly on a PC (a recent Dell laptop).
This is a real bummer for me - I worked a long time to make the video as good as I could get it from 50 year old films, and on the Mac it seemed to play perfectly.
So, is the issue with iDVD (and I need to start over with a PC-based authoring package like Nero or Easy Media Creator)? Or is it something else?
Any suggestions are appreciated - I really would like to get these films moved onto DVDs my family can watch (instead of using them as coasters).
Mac Mini Mac OS X (10.4.3)

It plays fine on the Mac, but on a consumer DVD
player, the disc plays for maybe 20 minutes, then the
video starts to stutter, and eventually the DVD
player makes clicking noises and stops playing. The
same disc will play longer in a PC, but it eventually
stops there, too. The slide show part of the disc
doesn't play at all on the DVD player, and plays
poorly on a PC (a recent Dell laptop).
Hi There,
DVD playback stutters, freezes after about 20 minutes. I scoured the net for answers to this dilema and spoke to the highest technicians at apple who couldn't help me.
Through much frustration and many bad burnt discs I asked them to replace the DVD burner in my new G5 - Voila it stopped.
The answer is replace the burner in your Mac.
Hope you fine this the answer to your problem

Burn process not completely done, messing up dvd playback

When I try to burn from idvd, it goes through all the processes, then it completes the burn, spits out the disk and then the program freezes.
When I try to play back the dvd on a dvd player or computer it plays about half of one slide show, won't open the other and just quits working all together...my dvd player says it doesn't have playback capabilities, yet more than half of it played.
I did do the trial burn on the mac and it works perfectly...any ideas what is messing this up?

It could be any number of things. Of course, if it "completes the burn" then you should expect the disk to be ejected. The freezing up part shouldn't occur. You say that you did a "trial burn on the Mac and it works perfectly". I take it that you mean that you saved the project to your hard drive as a disk image, and that the disk image played fine. If that's so, then iDVD did its job correctly. Try burning from the disk image using the disk utility app on your Mac instead of directly from iDVD.
If that doesn't work, try going through the usual maintenance procedures and diagnostics. No guarantees that they will work, but worth a try. First I would try the oft applied maintenance of deleting preferences and doing a permissions repair. To delete preferences, close i/DVD and trash the file named com.apple.iDVD.plist found in User (the house icon)/Library/Preferences. Then do a permissions repair using the Disk Utility app found in HD/Applications/Utilities. In the left hand pane of the Disk Utility window seclect your hard drive icon and then click on repair permissions. Takes about 3 minutes to repair. Then relaunch iDVD and see if you still have the problem. iDVD will recreate the .plist file that you deleted.
Check to make sure that you have sufficient free disk space on your boot drive to do a burn. 20GB--25GB often is recommended on this forum.
Switching to a different brand of DVD media will sometimes help. Verbatim, HP, Fuji, Sony are brands frequently recommended here.
Update all programs to current.
Make sure that you have no conflicting 3rd party apps or Quicktime Apps. If so they should be temporary disabled.
Use Disk Utility to burn, and burn at a speed of 4x or lower.
Before you burn make sure that all computer intensive programs, and automatic programs are shut down. Programs like screen savers, power savers, automatic software updates and the like should be turned off.
If your DVD player can play part of the DVD, but then fails, possibly you have a DVD drive problem or a DVD player problem.
Here is a trouble shooting addy that might help:
http://support.apple.com/kb/HT1583?viewlocale=en_US
Good luck with this.

Sleeps during DVD playback

Why does OS X.4 display go to sleep during Quicktime playback? It doesn't matter if I'm watching something through FrontRow, Quicktime, or the DVD player.
Specifically, when my MacBook is on battery power, my display sleep comes on within a few minutes. It dims first and then sleeps a short time later. All this is normal behavior EXCEPT I don't want it to sleep while playing a DVD. If I'm watching a DVD, sleep mode should never happen.
My other mac computers do the same thing but its less noticeable since the display sleep delay times are longer.
What settings am I missing or perhaps this is a bug?

I'm sorry my first post was too brief. I should have mentioned my settings before. I'm not a newbie looking for location of Energy Saver settings and I'm not quite sure why it should matter.
What possible combination of settings would allow the computer or display to sleep during DVD or Quicktime playback?
Settings for: Battery
Optimization: Normal
Reduce brightness for this power source- checked
Reduce brightness before sleep- checked
It will never sleep if the mouse is moving regardless of Energy Saver settings, right? Why should the display ever be put to sleep during playback of a DVD? It's like the OS never recognizes DVD & Quicktime video playback as actively using the computer.
Questions:
Does yours go to sleep during DVD playback?
What settings are you using?
I suspect this is an OS X.4 bug as I've caught one of my PPC macs going to screen-saver in the middle of playing a Quicktime movie clip.
Thank-you for your help... I really appreciate it even if it sounds otherwise.

Bad DVD burns

In the last few days I have been experiencing a number of bad DVD burns. Wasted about six discs. The playback hangs up part way through.
I finally resorted to "Toast". It gives me good burns everytime, but I miss the themes of iDVD. The recordings are of lectures and are about 1.25 hrs in length with some stills and music. I have done this many many times before with no problems. I let iDVD do the rendering of the stills.
David

Hi
Just some thoughts about DVD-Quality. Unstructured collection.
Can may be be of help.
DVD quality
1. iDVD 8 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies up to 120 min.) - BEST
• Best Performances (movies less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08) / Best Quality (in iDVD6) (movies up to 120 min.) - slightly lower quality than above
2. From
• FCE/P - Export out as full quality QuickTime.mov (not selfcontaining, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 this can also be set)
This can also be done with (Apple) Disk Util tool.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on:
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS: They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD08
Pro Quality (only in iDVD08)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD08
2. Project info: Select Professional Encoding - only in iDVD08.
Region codes:
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes:
1 = US
2 = EU
Yours Bengt W

DVD playback issue with Windows Media Player

Hi,
This isn't an Encore specific question, rather, a DVD playback one. Has anyone had issue playing their replicated DVDs in Windows Media Player? I truly believe it's the media player, not the DVD. When we put a DVD in the drive and try to open it in WMP, it jumps right to a video, or jumps directly to the last place we were in a video.... it's not defaulting to the main menu.
Has anyone experienced this? Is it a programming glitch on my DVD? I feel like it's a WMP issue, as it's only happening on certain computers.
thanks.

WMP has never been a good player for DVD's. At some point in the past, much of that functionality was disabled my MS, in hopes to reduce piracy. For some versions, no burned DVD would even play, though replicated/pressed DVD's were supposed to play fine.
I use CyberLink's PowerDVD and it is fine, even with my burned DVD's. The free MediaPlayer Classic HC plays my discs well too, with full menuing.
Good luck,
Hunt

Bad DVD Playback on Computer

Similar Messages

Maybe you are looking for