Bad echo while dialing out on a new 8520

Hi,
Been getting bad echo of my own voice when I dial out. The echo starts even before the call gets connected. This is a brand new phone and i've noticed this from the first call itself. Can anyone help with this?

Hi,
I have the same problem too... . I got this phone just 10 days back.
Thanks,
vJ

Similar Messages

  • Dial out without Enterprise Voice

    I see that the enterprise CAL includes:
    Initiate/Schedule ad-hoc multi-party (3+) audio conference (including dial-out to PSTN and/or PBX user)
    I am able to dial in (from PSTN) to a conference. However, when I launch a meeting from the meet URL and choose to call me at my extension (1234) I get error:
    Cannot locate 1234.
    When I turn on enterprise voice for my user and do the same test the call goes through fine to my extension.

    While dial-out is officially 'unsupported' by Microsoft for non-EV users:
    http://blogs.technet.com/b/nexthop/archive/2011/06/20/lync-server-2010-join-meeting-audio-scenarios.aspx
    It can be done (and I'm doing) through this method:
    http://www.confusedamused.com/notebook/lync-dial-in-conferencing-static-route-configuration/
    Regards,
    mG
    If a post is helpful, please take a second to hit the GREEN ARROW on the left, or mark as ANSWER. Mark A. Gutowski

  • Phone won't dial out. Old phone received missed calls yesterday instead of my new phone.

    Current phone suddenly won't dial out. Yesterday my old phone (which I use for WiFi only and which has not been activated for about 1 year) started receiving calls instead of my current phone. I was not around to answer them, but they only registered as missed calls on my old phone.
    Today I tried making a call and my current phone won't dial out--trying to dial any number just gives me silence and then it disconnects after 30 seconds or so. I tried dialing out on the old phone, but it gives me a roaming message and wants me to either buy a calling PIN or call collect to dial out. On my current phone I can still use data/internet fine and I think texting still works (tested by texting my own number and I received the text).
    I've tried powering off the old phone for a while and then restarting the new phone, but it didn't help... I can't call verizon since I can't dial out and its saturday night so it looks like their chat is offline..
    How can I fix this? Help is greatly appreciated!

    Thanks for the reply.
    Unfortunately *611 does not work -- like all numbers I try to dial, it goes to the "dialing" screen then does nothing for about 30 seconds, then it disconnects.
    *228 Brings up a message box that says "a verizon wireless sim card has activated your service and updated your phone's roaming capabilities. Your phone number is [my number]" The problem is not fixed however.
    I should also clarify that I have been using my old phone for wifi/mp3 playing just fine for the past 1 year without experiencing this problem ever before. My current/newer phone has been working fine right next to it all that time. I did just pull my old SIM card out of my old phone just now in case that might help (should have done that a long time ago). I also removed the battery. That was several hours ago, still having the problem after rebooting the new phone and testing many times.
    Using another person's phone I have now verified that I can't make or receive any calls on my new phone, but I can send and receive text messages as well as use mobile data/internet. The newer phone is an LG G2 and the old phone is a Galaxy Nexus if that matters.
    Thanks for the help so far

  • New to mac. While transferring files from old computer to mac I burnt out a brand new flash drive. How do I format a new flash drive so that it will let me transfer stuff from mac to pc or vise versa??

    New to mac. While transferring files from old computer to mac I burnt out a brand new flash drive. How do I format a new flash drive so that it will let me transfer stuff from mac to pc or vise versa??

    "guess no one can help me. thanks anyway have a great night everyone"
    Some of us do find time to sleep.

  • I am using Adobe Reader X on a laptop with Windows Vista OS and Adobe Reader XI on an older laptop with Windows XP OS.  While filling out the same form on each computer, I have found that I can save info on the older laptop, but not on the newer one.  Thi

    I am using Adobe Reader X on a laptop with Windows Vista OS and Adobe Reader XI on an older laptop with Windows XP OS.  While filling out the same form on each computer, I have found that I can save info on the older laptop, but not on the newer one.  This is a big problem.  I must be able to save on the newer computer.  Do I need to buy a new computer with a more up-to-date OS?  Please help.

    Adobe Reader X can only save reader-enabled forms. Adobe Reader XI can save all forms.

  • Still after update to 5.0.1 same problem with the 4S with dial out, connecting to internet, echo in reception. It is the second phone.

    Still after update to 5.0.1 same problem with the 4S with dial out, connecting to internet, echo in reception. It is the second phone.

    Try deleting the account(s) you're having problems with, resetting your phone (hold on/off and home buttons simultaneously 10-15 seconds until Apple logo appears, release buttons and wait for it to restart), then add back your mail accounts.  I've read that this has worked for some.

  • Phone wont dial out

    I live in California, daughter is visiting New York and her phone will not dial out.  Any suggestions she has tried dialing 1+ area code + number and it still wont work.

    guys thanks for those who view my post.
    the problem was a bad phone.

  • Apple Senior tech lady deleted all my external drive data while sorting out other problem. How can I restore all my photos , music etc back to my Mac Pro?(I am so scared, I haven't connected to sync! Please help)

    Apple Senior tech lady deleted all my external drive data while sorting out other problem. How can I restore all my photos , music etc back to my Mac Pro?(I am so scared, I haven't connected iPhone to sync! Please help)

    It was tele tech. I couldn't open my Page Numbers etc. Frist tech chat idiot - following dumping few things in bin, asked me yo upgrade to Yosemite. But the problem still persists. This morning I was asked to do it via telephone and like yesterday, after wasting 20 min, I was put to this apparent Tech Queen ( my foot!). She eventually decided to reinstall  Yosemite asked me to connect my external drive while I connected to her. She was moving cursor asking me to move files and delete and I followed her like a dummy. It took 3/4 hours and she called me 3 times once the lengthy process was completed. I suspected from the beginng for the fact that why should be asking me to click all my backup from the very beginning! Eventually she said I deleted... Or someone else or may be my children ! It was a blatant lie. I run my small business from home and I was simply staying in front of the Mac whole day! Children were at school. Then she said I must have used another computer! I only have laptop and the iPad. I will talk to their manager first thing in the morning. In the mean time please let me know as to how can I transfer photos, music etc back to my laptop from my Iphone and IPad .? I am will connect to laptop as I am worried the new BLANK iPhoto may supersede iphone/iPad stuff? Will it? Please let me know. I am not a very tech savvy person. My son who could help me, is in Manchester Uni and Inam in London.

  • Cannot Dial Out With a Cordless Phone

    A month ago I had a phone line installed at my flat. It's a New Build so I was starting from scratch. I've tried two different cordless phones in the socket and neither will dial out. I get a dial tone, but when I punch in a number a voice tells me the number isn't recognised. Yesterday I plugged in a friend's phone which is a big old corded thing that's at least fifteen years old. It worked fine. Another friend says the only real difference is that the old phone isn't digital and that I can't use a digital phone on my phone line. Has anyone heard of this before? I'm not sure what to do. I've had nothing but trouble with BT getting my address and billing wrong and I'm sick of them. I don't want to call again and lose more of my precious life force if I don't have to.

    Hi and welcome
    Ensure you have unplugged all other equipment when you have tried a different phone.
    Have you tried the phone (with no ADSL filter if you have Broadband) direct in the test point of your main socket?
    This main socket looks like this.
    remove the 2 screws each side of the socket and gently remove the bottom half, just in side the bit left on the wall you will find another socket on the right hand side, plug your phone directly into there and check if you can dial out now.
    If you cant dial out correctly to here (i would try a couple of phones), there is a fault outside of your premises and you should report it to your comms provider.
    If it works ok to the test socket you have a fault within your premises either on wiring or aparatus.
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • My blackberry is dialing out on its own, explain how this is possible please :)

    My blackberry curve dials out the same number without any attempt on my part, for instance I had left my phone on the table and it dialed out. It continued to dial out the same number until I deleted the number from my contacts.This occurred numerous times on separate occasions.
    Not only did it dial out that number but also spelled out the name of the individual it dials out on a voice txt. How is this possible?
    It does not dial out any  other contact and ever since i've delted this contact the phone no longer dials out.
    what are some explanations for this problem?

    Better news my charger I was using appears to maybe be part of the thing. I wouldn't work so I got my brothers and it charges so is it possible the old charger was shorting it thus the safety bit killed the power? Maybe the angle is just happen stance.

  • Problem While Taking out Printout Through ME9F

    Hi,
    I am facing problem while taking out printout of purchase orderthrough ME9F.
    as if i have to take out the printout of any po i have change the printer to LP02 in messages in me22n.
    In messages i hav output type NEUand in that Logical destination is set to LP01.
    Now can any body tell me how can I Set that output type for printer LP02 So that whenever the New Po is created i Don't have to change it's Logical destination type.

    hi,
    FIrstly check NACE
    THen go to MN05 for setting...
    Steps:
    Maintain the o/p type...
    click on the key combination...
    Can maintain at any of them as per your requirement...
    in the next screen,Then change for single vendor or for range of vendors....enter the necessary data...
    Then in the next window, maintain the vendor, function and partner if any, medium etc...and save it...
    Now from next time it'll give you the this maintained o/p type...
    Regards
    Priyanka.P
    Edited by: Priyanka Paltanwale on Oct 22, 2008 10:04 AM

  • VOIP Dial out issues with SRP547W

    Hi All, this is my first post so I appologise if I have posted it in the wrong place up front.
    I have recently purchased an SRP 547w replacing an 877w and linksys pap2t voip box.
    I have 1 major issue at present - no matter which number I dial, I cannot ring out.  I get what appears to be an engaged tone.
    History:  I used to run the linksys papt2 behind the 877w and it worked without issue.  Ports opened and forwarded were:
    udp 5060-5061
    udp 8000-8001
    my SIP port is 5060
    the RTP ports are 8000-8001
    I know this works on the SRP547 as without them, I cannot make any calls into the system.
    These settings worked perfectly on the PAP2T; I have copied them across to the SRP547W and opened the same ports.  I can call VOIP device on the specified number, but still no dialing out. 
    The 2 main differences I can see on the new device 1)  The VOIP is integrated into the router so I'm not routing traffic in exaxtly the same way as I was with the PAPt2 and the second being that the SRP547W also has the ability to connect a PSTN line - which I do not have.
    I wonder if this has anything to do with the issue?
    For the record, I have diabled the firewall - same result; additionally, if I connect the PAP2T to the SRP547 and forward the ports (or enable UPNP) then I can actually dial out which means I think its safew to say that my issue is within the SRP547W.
    I can conrim that the SRP547 does 'hear' the tones from the phone.  When I dial certain numbers (to force certein codecs) the system responds to them. 
    If anyone else has had a similar issue, could you help me out with some direction?
    I'd post logs, but I'm not sure how to get them off this device (yet) - I've only had this device for 4 days.....

    I forgot to post an update. 
    Get this, I figured out the problem and it was Sun Rocket.
    They did a firmware update over night that caused it to break. 
    After about three months of working with Linksys, Comcast and Microsoft and tyring everything I was told. It still failed.
    Then after another month, I finally was contacted by an engineer from Sun Rocket who was giving me advice over everything we already tried.
    I asked him if there was a firmware update from the date I put the complaint ticket in. He checked the database and sure enought, that is what it was.
    Their firmware update did not work well with the Linksys router.  He rolled back the firmware and now it works perfect.
    The SunRocket tech said he put me on a list of Sun Rocket Gizmos NOT TO update firmware.
    Well , about 2 months later, they updated it by mistake and now I am going through the pains with SunRocket all over again.
    I told them how they fixed it but the Level 1, 2 and 3 techs don't seem to know how to roll back the firmware and they did not have any notes from the engineer on what version to roll it back to.
    The the root cause was SunRocket's Gizmo.
    Trust me, I've tried chaning the MTU to remoting in to the Sunrocket Gizmo and change the bandwith settings ect ect.  I've been through the ringer and I still have problems with them.
    The SunRocket Gizmo can not handle the high bandwidth like the linksys router can.
    Good Luck, I only have SunRocket for another month and I am thnking about going with Vonage or Comcast.
    Here is a picture of the SunRocket Gizmo I am using.
    Message Edited by TheInfamousOne on 01-05-200709:56 PM
    Message Edited by TheInfamousOne on 01-05-200710:00 PM

  • Freezing while exporting out of premeire cs6?

    I am having problems exporting out of premiere cs6. It completely freezes halfway, all of my settings match, does anybody know why this is happening?? please help.

    Thank you Mr. Hunt, I found out that it was one of the clips in my TL it was a motion Jpeg,, I had to export it out as a H.264. Thanks for your help.
    Date: Tue, 19 Feb 2013 16:01:47 -0800
    From: [email protected]
    To: [email protected]
    Subject: freezing while exporting out of premeire cs6?
        Re: freezing while exporting out of premeire cs6?
        created by Bill Hunt in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
    For that error, perhaps this Adobe KB Article will be useful? http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering -or.html Good luck, Hunt
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5086487#5086487
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5086487#5086487
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5086487#5086487. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Can I develop servlets locally using IE6 without dialing out?

    I have Windows 2000, Internet Explorer 6 and JRun 3.1 on my system. I also have a dial-up internet connection.
    My question is, is there a way to use my browser to access local servlet generated web pages on my system without IE requesting to dial out for each request going to the servlet? Is there some kind of setting that allows me to develop on a local system? Would Netscape work differently than IE?
    When I start my servlet from IE6 using http://localhost:8102/..., IE always prompts "The Web page you requested is not available offline. To view this page, click Connect." If I click Stay Offline, I get no output at all. If I click Connect, I get another prompt stating "Select the service you want to connect to and then enter you user name and password." If at this point I click Work Offline, the request is sent to the servlet and the request is processed. The problem with this is this prompting happens for every request going to the servlet. I also have to keep deleting the off-line content files so that the changed forms get displayed, not the forms stored in the cache. I have "Check for newer versions of stored pages" set to "Every visit to the page".
    Is there any way that I can set up development on my system without dialing out for each request?
    Bob

    Yeah, IE is silly. There is no reason for IE to want to dial up if your server is local. You might want to go through IE help or Tools->Internet Options to figure out.
    Netscape (atleast the version I have) will not ask you to "connect".

  • IPCC 20999 Error while dailing out from CTIOS

    We are getting the following error while dailing out from the CTIOS softphone dail pad(Happening for one agent though). We are  on Callmanger 6X and CTIOS 7.2X. Please see the sceenprint attached for the error message. Appreciate any help on this.

    Aman,
    I worked with Sean to resolve this issue today.
    As Sean had stated, this particular agent had received a new physical phone because the original had failed. When the Service Desk created this new phone, they copied the old, changed the MAC, and saved the new phone. When this happened, the same DN's we're then assigned to two physical phones. Well... ICM doesn't like this too much at all.
    1. I removed the old phone from being associated with the PG User account. It was still associated even though not in use.
    2. I unasssigned all DN's from the old phone.
    I believe it's the second piece that was causing the issue. 1 DN, 2 phones doesn't work to well! ;-)

Maybe you are looking for