Bad Fan in 2801 Router
Hello Cisco Community, Looks like I have a bad FAN supply on a 2801 router. I wanted to know if need to RMA the whole Chassis or if i can replace it with a 2811 fan supply (ACS-2811-FAN-1/2)?
Thanks,
Sergio
You open an RMA base on the serial number of the chassis. Give the TAC engineer the error message which states you've got a bad fan and they'll send you the replacement fan plus the instructions about how to replace the fan.
Similar Messages
-
Site to Site VPN Problems With 2801 Router and ASA 5505
Hello,
I am having some issue setting up a site to site ipsec VPN between a Cisco 2801 router and a Cisco ASA 5505. I was told there was a vpn previously setup with an old hosting provider, but those connections have been servered. Right now I am trying to get the sites to talk to the 2801. Here ere are my current configs, please let me know if you need anything else. Im stumped on this one. Thanks.
IP scheme at SIte A:
IP 172.19.3.x
sub 255.255.255.128
GW 172.19.3.129
Site A Ciscso 2801 Router
Current configuration : 11858 bytes
version 12.4
service timestamps debug datetime localtime
service timestamps log datetime localtime show-timezone
service password-encryption
hostname router-2801
boot-start-marker
boot-end-marker
logging message-counter syslog
logging buffered 4096
aaa new-model
aaa authentication login userauthen group radius local
aaa authorization network groupauthor local
aaa session-id common
clock timezone est -5
clock summer-time zone recurring last Sun Mar 2:00 1 Sun Nov 2:00
dot11 syslog
ip source-route
ip dhcp excluded-address 172.19.3.129 172.19.3.149
ip dhcp excluded-address 172.19.10.1 172.19.10.253
ip dhcp excluded-address 172.19.3.140
ip dhcp ping timeout 900
ip dhcp pool DHCP
network 172.19.3.128 255.255.255.128
default-router 172.19.3.129
domain-name domain.local
netbios-name-server 172.19.3.7
option 66 ascii 172.19.3.225
dns-server 172.19.3.140 208.67.220.220 208.67.222.222
ip dhcp pool VoiceDHCP
network 172.19.10.0 255.255.255.0
default-router 172.19.10.1
dns-server 208.67.220.220 8.8.8.8
option 66 ascii 172.19.10.2
lease 2
ip cef
ip inspect name SDM_LOW cuseeme
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp
ip inspect name SDM_LOW udp
ip inspect name SDM_LOW vdolive
no ip domain lookup
ip domain name domain.local
multilink bundle-name authenticated
key chain key1
key 1
key-string 7 06040033484B1B484557
crypto pki trustpoint TP-self-signed-3448656681
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3448bb6681
revocation-check none
rsakeypair TP-self-signed-344bbb56681
crypto pki certificate chain TP-self-signed-3448656681
certificate self-signed 01
3082024F
quit
username admin privilege 15 password 7 F55
archive
log config
hidekeys
crypto isakmp policy 10
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key XXXXX address 209.118.0.1
crypto isakmp key xxxxx address SITE B Public IP
crypto isakmp keepalive 40 5
crypto isakmp nat keepalive 20
crypto isakmp client configuration group IISVPN
key 1nsur3m3
dns 172.19.3.140
wins 172.19.3.140
domain domain.local
pool VPN_Pool
acl 198
crypto isakmp profile IISVPNClient
description VPN clients profile
match identity group IISVPN
client authentication list userauthen
isakmp authorization list groupauthor
client configuration address respond
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map Dynamic 5
set transform-set myset
set isakmp-profile IISVPNClient
qos pre-classify
crypto map VPN 10 ipsec-isakmp
set peer 209.118.0.1
set peer SITE B Public IP
set transform-set myset
match address 101
qos pre-classify
crypto map VPN 65535 ipsec-isakmp dynamic Dynamic
track 123 ip sla 1 reachability
delay down 15 up 10
class-map match-any VoiceTraffic
match protocol rtp audio
match protocol h323
match protocol rtcp
match access-group name VOIP
match protocol sip
class-map match-any RDP
match access-group 199
policy-map QOS
class VoiceTraffic
bandwidth 512
class RDP
bandwidth 768
policy-map MainQOS
class class-default
shape average 1500000
service-policy QOS
interface FastEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0$$FW_INSIDE$
ip address 172.19.3.129 255.255.255.128
ip access-group 100 in
ip inspect SDM_LOW in
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface FastEthernet0/0.10
description $ETH-VoiceVLAN$$
encapsulation dot1Q 10
ip address 172.19.10.1 255.255.255.0
ip inspect SDM_LOW in
ip nat inside
ip virtual-reassembly
interface FastEthernet0/1
description "Comcast"
ip address PUB IP 255.255.255.248
ip access-group 102 in
ip inspect SDM_LOW out
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map VPN
interface Serial0/1/0
description "Verizon LEC Circuit ID: w0w13908 Site ID: U276420-1"
bandwidth 1536
no ip address
encapsulation frame-relay IETF
frame-relay lmi-type ansi
interface Serial0/1/0.1 point-to-point
bandwidth 1536
ip address 152.000.000.18 255.255.255.252
ip access-group 102 in
ip verify unicast reverse-path
ip inspect SDM_LOW out
ip nat outside
ip virtual-reassembly
frame-relay interface-dlci 500 IETF
crypto map VPN
service-policy output MainQOS
interface Serial0/2/0
description "PAETEC 46.HCGS.788446.CV (Verizon ID) / 46.HCGS.3 (PAETEC ID)"
ip address 123.252.123.102 255.255.255.252
ip access-group 102 in
ip inspect SDM_LOW out
ip nat outside
ip virtual-reassembly
encapsulation ppp
crypto map VPN
service-policy output MainQOS
ip local pool VPN_Pool 172.20.3.130 172.20.3.254
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 50.00.000.110 track 123
ip route 0.0.0.0 0.0.0.0 111.252.237.000 254
ip route 122.112.197.20 255.255.255.255 209.252.237.101
ip route 208.67.220.220 255.255.255.255 50.78.233.110
no ip http server
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip flow-top-talkers
top 20
sort-by bytes
ip nat inside source route-map COMCAST interface FastEthernet0/1 overload
ip nat inside source route-map PAETEC interface Serial0/2/0 overload
ip nat inside source route-map VERIZON interface Serial0/1/0.1 overload
ip nat inside source static tcp 172.19.3.140 21 PUB IP 21 extendable
ip access-list extended VOIP
permit ip 172.20.3.0 0.0.0.127 host 172.19.3.190
permit ip host 172.19.3.190 172.20.3.0 0.0.0.127
ip radius source-interface FastEthernet0/0
ip sla 1
icmp-echo 000.67.220.220 source-interface FastEthernet0/1
timeout 10000
frequency 15
ip sla schedule 1 life forever start-time now
access-list 23 permit 172.19.3.0 0.0.0.127
access-list 23 permit 172.19.3.128 0.0.0.127
access-list 23 permit 173.189.251.192 0.0.0.63
access-list 23 permit 107.0.197.0 0.0.0.63
access-list 23 permit 173.163.157.32 0.0.0.15
access-list 23 permit 72.55.33.0 0.0.0.255
access-list 23 permit 172.19.5.0 0.0.0.63
access-list 100 remark "Outgoing Traffic"
access-list 100 deny ip 67.128.87.156 0.0.0.3 any
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit tcp host 172.19.3.190 any eq smtp
access-list 100 permit tcp host 172.19.3.137 any eq smtp
access-list 100 permit tcp any host 66.251.35.131 eq smtp
access-list 100 permit tcp any host 173.201.193.101 eq smtp
access-list 100 permit ip any any
access-list 100 permit tcp any any eq ftp
access-list 101 remark "Interesting VPN Traffic"
access-list 101 permit ip 172.19.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 101 permit ip 172.20.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 101 permit ip 172.19.3.128 0.0.0.127 host 172.19.250.10
access-list 101 permit ip 172.19.3.128 0.0.0.127 host 172.19.250.11
access-list 101 permit tcp any any eq ftp
access-list 101 permit tcp any any eq ftp-data
access-list 102 remark "Inbound Access"
access-list 102 permit udp any host 152.179.53.18 eq non500-isakmp
access-list 102 permit udp any host 152.179.53.18 eq isakmp
access-list 102 permit esp any host 152.179.53.18
access-list 102 permit ahp any host 152.179.53.18
access-list 102 permit udp any host 209.000.000.102 eq non500-isakmp
access-list 102 permit udp any host 209.000.000.102 eq isakmp
access-list 102 permit esp any host 209.000.000.102
access-list 102 permit ahp any host 209.000.000.102
access-list 102 permit udp any host PUB IP eq non500-isakmp
access-list 102 permit udp any host PUB IP eq isakmp
access-list 102 permit esp any host PUB IP
access-list 102 permit ahp any host PUB IP
access-list 102 permit ip 72.55.33.0 0.0.0.255 any
access-list 102 permit ip 107.0.197.0 0.0.0.63 any
access-list 102 deny ip 172.19.3.128 0.0.0.127 any
access-list 102 permit icmp any any echo-reply
access-list 102 permit icmp any any time-exceeded
access-list 102 permit icmp any any unreachable
access-list 102 permit icmp any any
access-list 102 deny ip any any log
access-list 102 permit tcp any host 172.19.3.140 eq ftp
access-list 102 permit tcp any host 172.19.3.140 eq ftp-data established
access-list 102 permit udp any host SITE B Public IP eq non500-isakmp
access-list 102 permit udp any host SITE B Public IP eq isakmp
access-list 102 permit esp any host SITE B Public IP
access-list 102 permit ahp any host SITE B Public IP
access-list 110 remark "Outbound NAT Rule"
access-list 110 remark "Deny VPN Traffic NAT"
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.19.10.0 0.0.0.255
access-list 110 deny ip 172.19.10.0 0.0.0.255 172.19.3.128 0.0.0.127
access-list 110 deny ip 172.20.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.20.3.128 0.0.0.127
access-list 110 deny ip 172.19.3.128 0.0.0.127 host 172.19.250.11
access-list 110 deny ip 172.19.3.128 0.0.0.127 host 172.19.250.10
access-list 110 permit ip 172.19.3.128 0.0.0.127 any
access-list 110 permit ip 172.19.10.0 0.0.0.255 any
access-list 198 remark "Networks for IISVPN Client"
access-list 198 permit ip 172.19.3.0 0.0.0.127 172.20.3.128 0.0.0.127
access-list 198 permit ip 172.19.3.128 0.0.0.127 172.20.3.128 0.0.0.127
access-list 199 permit tcp any any eq 3389
route-map PAETEC permit 10
match ip address 110
match interface Serial0/2/0
route-map COMCAST permit 10
match ip address 110
match interface FastEthernet0/1
route-map VERIZON permit 10
match ip address 110
match interface Serial0/1/0.1
snmp-server community 123 RO
radius-server host 172.19.3.7 auth-port 1645 acct-port 1646 key 7 000000000000000
control-plane
line con 0
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
transport input telnet ssh
scheduler allocate 20000 1000
ntp server 128.118.25.3
ntp server 217.150.242.8
end
IP scheme at site B:
ip 172.19.5.x
sub 255.255.255.292
gw 172.19.5.65
Cisco ASA 5505 at Site B
ASA Version 8.2(5)
hostname ASA5505
domain-name domain.com
enable password b04DSH2HQqXwS8wi encrypted
passwd b04DSH2HQqXwS8wi encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 172.19.5.65 255.255.255.192
interface Vlan2
nameif outside
security-level 0
ip address SITE B public IP 255.255.255.224
boot system disk0:/asa825-k8.bin
ftp mode passive
clock timezone est -5
clock summer-time zone recurring last Sun Mar 2:00 last Sun Oct 2:00
dns server-group DefaultDNS
domain-name iis-usa.com
same-security-traffic permit intra-interface
object-group network old hosting provider
network-object 72.55.34.64 255.255.255.192
network-object 72.55.33.0 255.255.255.0
network-object 173.189.251.192 255.255.255.192
network-object 173.163.157.32 255.255.255.240
network-object 66.11.1.64 255.255.255.192
network-object 107.0.197.0 255.255.255.192
object-group network old hosting provider
network-object host 172.19.250.10
network-object host 172.19.250.11
access-list 100 extended permit ip 172.19.5.64 255.255.255.192 object-group old hosting provider
access-list 100 extended permit ip 172.19.5.64 255.255.255.192 172.19.3.128 255.255.255.128
access-list 10 extended deny ip 0.0.0.0 255.0.0.0 any
access-list 10 extended deny ip 127.0.0.0 255.0.0.0 any
access-list 10 extended deny ip 169.254.0.0 255.255.0.0 any
access-list 10 extended deny ip 172.16.0.0 255.255.0.0 any
access-list 10 extended deny ip 224.0.0.0 224.0.0.0 any
access-list 10 extended permit icmp any any echo-reply
access-list 10 extended permit icmp any any time-exceeded
access-list 10 extended permit icmp any any unreachable
access-list 10 extended permit icmp any any traceroute
access-list 10 extended permit icmp any any source-quench
access-list 10 extended permit icmp any any
access-list 10 extended permit tcp object-group old hosting provider any eq 3389
access-list 10 extended permit tcp any any eq https
access-list 10 extended permit tcp any any eq www
access-list 110 extended permit ip 172.19.5.64 255.255.255.192 172.19.3.0 255.255.255.128
access-list 110 extended permit ip 172.19.5.64 255.255.255.192 object-group old hosting provider
pager lines 24
logging enable
logging timestamp
logging console emergencies
logging monitor emergencies
logging buffered warnings
logging trap debugging
logging history debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip verify reverse-path interface inside
ip verify reverse-path interface outside
ip audit name jab attack action alarm drop reset
ip audit name probe info action alarm drop reset
ip audit interface outside probe
ip audit interface outside jab
ip audit info action alarm drop reset
ip audit attack action alarm drop reset
ip audit signature 2000 disable
ip audit signature 2001 disable
ip audit signature 2004 disable
ip audit signature 2005 disable
icmp unreachable rate-limit 1 burst-size 1
icmp permit 75.150.169.48 255.255.255.240 outside
icmp permit 72.44.134.16 255.255.255.240 outside
icmp permit 72.55.33.0 255.255.255.0 outside
icmp permit any outside
icmp permit 173.163.157.32 255.255.255.240 outside
icmp permit 107.0.197.0 255.255.255.192 outside
icmp permit 66.11.1.64 255.255.255.192 outside
icmp deny any outside
asdm image disk0:/asdm-645.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list 100
nat (inside) 1 0.0.0.0 0.0.0.0
access-group 10 in interface outside
route outside 0.0.0.0 0.0.0.0 174.78.151.225 1
timeout xlate 3:00:00
timeout conn 24:00:00 half-closed 0:10:00 udp 0:10:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 24:00:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http 107.0.197.0 255.255.255.192 outside
http 66.11.1.64 255.255.255.192 outside
snmp-server host outside 107.0.197.29 community *****
snmp-server host outside 107.0.197.30 community *****
snmp-server host inside 172.19.250.10 community *****
snmp-server host outside 172.19.250.10 community *****
snmp-server host inside 172.19.250.11 community *****
snmp-server host outside 172.19.250.11 community *****
snmp-server host outside 68.82.122.239 community *****
snmp-server host outside 72.55.33.37 community *****
snmp-server host outside 72.55.33.38 community *****
snmp-server host outside 75.150.169.50 community *****
snmp-server host outside 75.150.169.51 community *****
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map VPNMAP 10 match address 110
crypto map VPNMAP 10 set peer 72.00.00.7 old vpn public ip Site B Public IP
crypto map VPNMAP 10 set transform-set ESP-3DES-MD5
crypto map VPNMAP 10 set security-association lifetime seconds 86400
crypto map VPNMAP 10 set security-association lifetime kilobytes 4608000
crypto map VPNMAP interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 20
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet 172.19.5.64 255.255.255.192 inside
telnet 172.19.3.0 255.255.255.128 outside
telnet timeout 60
ssh 0.0.0.0 0.0.0.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 60
console timeout 0
management-access inside
dhcpd dns 172.19.3.140
dhcpd wins 172.19.3.140
dhcpd ping_timeout 750
dhcpd domain iis-usa.com
dhcpd address 172.19.5.80-172.19.5.111 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection scanning-threat shun except object-group old hosting provider
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
ntp server 128.118.25.3 source outside
ntp server 217.150.242.8 source outside
tunnel-group 72.00.00.7 type ipsec-l2l
tunnel-group 72.00.00.7 ipsec-attributes
pre-shared-key *****
tunnel-group old vpn public ip type ipsec-l2l
tunnel-group old vpn public ip ipsec-attributes
pre-shared-key *****
tunnel-group SITE A Public IP type ipsec-l2l
tunnel-group SITE A Public IP ipsec-attributes
pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect netbios
inspect tftp
inspect pptp
inspect sip
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:
: endI have removed the old "set peer" and have added:
IOS router:
access-list 101 permit ip 172.19.3.128 0.0.0.127 172.19.5.64 0.0.0.65
ASA fw:
access-list 110 extended permit ip 172.19.5.64 255.255.255.192 172.19.3.128 255.255.255.128
on the router I have also added;
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.19.5.64 0.0.0.63
Here is my acl :
access-list 110 remark "Outbound NAT Rule"
access-list 110 remark "Deny VPN Traffic NAT"
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.19.10.0 0.0.0.255
access-list 110 deny ip 172.19.10.0 0.0.0.255 172.19.3.128 0.0.0.127
access-list 110 deny ip 172.20.3.128 0.0.0.127 172.19.3.0 0.0.0.127
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.20.3.128 0.0.0.127
access-list 110 deny ip 172.19.3.128 0.0.0.127 host 172.19.250.11
access-list 110 deny ip 172.19.3.128 0.0.0.127 host 172.19.250.10
access-list 110 permit ip 172.19.3.128 0.0.0.127 any
access-list 110 permit ip 172.19.10.0 0.0.0.255 any
access-list 110 deny ip 172.19.3.128 0.0.0.127 172.19.5.64 0.0.0.63
access-list 198 remark "Networks for IISVPN Client"
access-list 198 permit ip 172.19.3.0 0.0.0.127 172.20.3.128 0.0.0.127
access-list 198 permit ip 172.19.3.128 0.0.0.127 172.20.3.128 0.0.0.127
Still no ping tothe other site. -
How to install 2-port vic3 2fxs/DID and 2-port vic2 fxo on cisco 2801 router
Hello
I'm looking for information on how to install 2 newly purchased cards and keep running into dead links. The cards I bought are for a CISCO-2801-CCME/K9 with PVDM2-8, FL-CCME-25, SP Services 128F/256D cisco router:
vic3 2fxs/DID and a vic2 2fxo.
I keep finding documents on how to install these cards but all links are dead and leading to nowhere.
http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/2port_FXS_DID_VIC.html#wp1065062
The 2 documents i'm looking for are: how to install a 2-port vic2 fxo cards on cisco 2801 router and how to install 2-port vic3 2fxs/DID cards on the same 2801 cisco router.
NOTE: I've never installed these cards and am not sure if:
Does my ios support both of these cards?
and which slots do I install those in the router.
I have 4 slots like this:
slot 0: This slot only accepts VIC's ***This could be used for the vic3 2fxs/DID card correct?
slot 1: Nothing written here ****What can i install in this slot?
slot 2: This slot only accepts VIC's and WIC's ***If I buy a WIC and install here which other slot can i install my VIC2-2FXO card in ?
slot 3: Nothing written here ***What can i install in this slot?
Any chance someone can help me out with this.
Thanks very muchOk
I was able to figure out what goes where and found out that the IOS i had c-2801-spservicesk9-mz.124-15.T10.bin with cme-full-4.1.0.2 tar didn't support the vic3 2fxs/DID card. I then found the one that works which is the c2801-spservicesk9-mz.124-22.YB5.bin.I am now able to see my new hardware interfaces. The question I have now is since the previous version ran with cme-full-4.1.0.2 tar i'm not sure if this needs to be changed since in the compatibility matrix i found this IOS c2801-spservicesk9-mz.124-22.YB5.bin to be compatible with cme-full-7.1.0.0 tar
Do i need to remove cme-full-4.1.0.2 tar and install the cme-full-7.1.0.0 tar?
If yes, i know how to install the cme-full-7.1.0.0 tar but how do i remove the other cme-full-4.1.0.2 tar file in order to be able to install the other version?
Thanks -
Hi, I'm thinking about buying a 2801 router, and adding a gigabit HWIC card to handle some intervlan routing, with one of the two fast ethernet ports being a link out to the internet. This is mostly just for a test setup. Do you guys think the 2801 will be able to handle routing at a gigabit. I ask because way back when my old 2600 router's CPU usage would top out when the data got high.
Thanks :)Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
A 2801 doesn't really have the capacity for a pair of FEs let alone a gig port.
Also, the HWIC port might struggle with a gig port too. -
No service password recovery command on cisco 2801 router
HI,
we have a cisco 2801 router in class which has a disabled pasword recovery. We tried almost everything, we cannot get into ROMmon and the break sequence dosent work in any program (hyper terminal, putty, teraterm pro). We dont have any idea how to solve this problem.
Here is the log from hyperterminal:
System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
PLD version 0x10
GIO ASIC version 0x127
c2801 processor with 131072 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
Readonly ROMMON initialized
PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
program load complete, entry point: 0x8000f000, size: 0xc100
Initializing ATA monitor library.......
program load complete, entry point: 0x8000f000, size: 0xc100
Initializing ATA monitor library.......
program load complete, entry point: 0x8000f000, size: 0xd49718
Self decompressing the image : #################################################
######## [OK]
--- TRIED BREAK SEQUENCE HERE but nothing happens ---
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
0X003AA110 public buffer pools
0X00211000 public particle pools
0X0013 0X00035000 Card in slot 1
0X000021B8 Onboard USB
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Allocating additional 7692663 bytes to IO Memory.
PMem allocated: 117440512 bytes; IOMem allocated: 16777216 bytes
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, 2801 Software (C2801-IPBASE-M), Version 12.4(1c), RELEASE SO
FTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 26-Oct-05 08:42 by evmiller
Image text-base: 0x6007ECA0, data-base: 0x61480000
--- TRIED BREAK SEQUENCE HERE but nothing happens too ---
Port Statistics for unclassified packets is not turned on.
Cisco 2801 (revision 6.0) with 114688K/16384K bytes of memory.
Processor board ID FCZ102422KK
2 FastEthernet interfaces
2 Low-speed serial(sync/async) interfaces
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
Press RETURN to get started!
Thanks for help!I usually suffer from the same issue, but what works for me everytime is the other method that simulates break sequence. Can't find the documentation for it but this is how it goes:
Set the serial connection as follows in Putty:
Baud rate 1200
1 stop bit
8 data bits
no parity
no flow control
Turn off your router, then turn it back on and immediately press the spacebar for about 10-15 seconds. All you'll see is giberish. After that reset your console connection settings to the usual 9600 baud rate, and you'll find yourself in rommon mode. -
VIC3-4FXO/DID module not detect in 2801 Router.
Hi Team,
I have Cisco 2801 router with 2 DSP 16 Channel, 128 MB DRAM and 128 MB flash. I am using IOS c2801-spservicesk9-mz.124-3i but the VIC3-4FXO/DID module is not detected. I tried to upgrade the IOS to 15.0 and 15.1 but the router is not boot up due to insufficient memory. In that IOS the FXO card is detected. I checked the data sheet of both router and FXO card it support 12.4T IOS but when I upload the IOS and try to boot same problem I have faced (router not boot due to insufficient memory). Kindly help me find out the appropriate IOS to resolve the issue.
Thanks in advance.
Regards,
Manas RanjanVIC3-4FXO card is not supported in 2801 according to table4
Table 4. Software and Memory Requirements for Voice/Fax Network Modules and Voice Interface Cards
Product
Cisco 2800 Series
Cisco 3800 Series
Cisco 2900 and 3900 Series
NM-HD-1V
NM-HD-2V
NM-HD-2VE
• Cisco IOS Software
• Release 12.3(8)T4
• "IP Voice" images
• Cisco IOS Software
• Release 12.3(11)T
• "IP Voice" images
• Cisco IOS Software Release 15.0(1)M
• "UC Technology" images
VIC2-2FXO
VIC2-4FXO
VIC2-2BRI-NT/TE
• Cisco IOS Software
• Release 12.3(8)T4
• "IP Voice" images
• Cisco IOS Software
• Release 12.3(11)T
• "IP Voice" images
• Cisco IOS Software Release 15.0(1)M
• "UC Technology" images
VWIC2-xMFT-xx
• Cisco IOS Software
• Release 12.3(14)T
• "IP Voice" images
• Cisco IOS Software
• Release 12.3(14)T
• "IP Voice" images
• Cisco IOS Software Release 15.0(1)M
• "UC Technology" images
VIC3-2E/M
• Cisco IOS Software
• Release 12.4(15)XW or 12.4(20)T
• "IP Voice" images
• Cisco IOS Software
• Release 12.4(15)XW or 12.4(20)T
• "IP Voice" images
• Cisco IOS Software Release 15.0(1)M
• "UC Technology" images
VIC3-2FXS/DID
VIC3-2FXS-E/DID
VIC3-4FXS/DID
• Cisco IOS Software
• Release 12.4(15)XZ or 12.4(20)T
• "IP Voice" images
• Cisco IOS Software
• Release 12.4(15)XZ or 12.4(20)T
• "IP Voice" images
• Cisco IOS Software Release 15.0(1)M
• "UC Technology" images -
HWIC-1DSU-T1 stats (errors) via snmp on 2801 router
Can anyone provide assistance on what the OID is for pollign the CSU card on a 2801 router? From looking at the docs, it looks possible. I just dont know what mib to use, etc.
Thank you,Yes, anotther VIC card can be added, but you will also need to upgrade PVDM2, becase the 8-channels currently installed is totally used by the existing 8 FXS ports.
-
ran apple hardware diagnostics. fan - master - long motor test error: did not reach target speed in time. fan runs all the time. sensor is connected. do I have a bad fan?
ran apple hardware diagnostics. fan - master - long motor test error: did not reach target speed in time. fan runs all the time. sensor is connected. do I have a bad fan?
-
Please help with SIP configuration on 2801 router
Hi All.
Please help me to setup a SIP account. I’m already struggling to do that for a few days, and can’t find out how to finish that. We have 2xISDN lines running, so I need to add a SIP trunk to existing config.
The information from our SIP provider:
We have issued the following DDI range: 018877000 – 99
There is no need to register the DDI’s as these will be offered to your PABX IP address provided to in the completed SIP trunking form.
Configuration details are as follows:
Our Primary Proxy:- 99.234.56.78
Codec supported:- G711Alaw, G729 (G711Alaw is the preferred codec)
Fax Support:- T38 and G711Alaw
DTMF:- RFC2833 and INFO
CLI Method:- Remote-Party-ID
Trunk doesn’t require registration; you just need to send Invite. In cisco this is done through Dial-peer session-target command. We are authenticating your IP address for outgoing calls and incoming calls we then forward to the IP mentioned in the sip form.
This is a SIP configuration on Cisco2801 router (I used outgoing calls only):
translation-rule 10
Rule 0 ^90 0
Rule 1 ^91 1
Rule 2 ^92 2
Rule 3 ^93 3
Rule 4 ^94 4
Rule 5 ^95 5
Rule 6 ^96 6
Rule 7 ^97 7
Rule 8 ^98 8
Rule 9 ^99 9
interface FastEthernet0/0.1
description ***DATA VLAN***
encapsulation dot1Q 1 native
ip address 10.1.1.101 255.255.255.0
interface FastEthernet0/0.2
description ***VOICE VLAN***
encapsulation dot1Q 2
ip address 192.168.22.1 255.255.255.0
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
call start slow
sip
bind control source-interface FastEthernet0/0.2
bind media source-interface FastEthernet0/0.2
registrar server expires max 36000 min 600
voice class codec 1
codec preference 1 g729r8
codec preference 2 g711ulaw
codec preference 3 g711alaw
dial-peer voice 1 pots
description ### External Dialling via BRI ###
preference 7
destination-pattern 9T
translate-outgoing called 10
direct-inward-dial
port 0/0/0
forward-digits all
dial-peer voice 2 pots
description ### External Dialling via BRI ###
preference 2
destination-pattern 9T
translate-outgoing called 10
direct-inward-dial
port 0/0/1
forward-digits all
dial-peer voice 9000 voip
description ** Outgoing calls to SIP **
preference 1
destination-pattern 9T
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target ipv4:99.234.56.78:5060
dtmf-relay rtp-nte
codec g711alaw
no vad
sip-ua
timers connect 100
sip-server ipv4:99.234.56.78
I used debugging commands to troubleshoot the calls.
2801(config-dial-peer)#
094509: Jan 24 09:27:06.204: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=211, Called Number=, Voice-Interface=0x65FA35B4,
Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
094510: Jan 24 09:27:06.204: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=20018
094511: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9, Peer Info Type=DIALPEER_INFO_SPEECH
094512: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9
094513: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094514: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094515: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90, Peer Info Type=DIALPEER_INFO_SPEECH
094516: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90
094517: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094518: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094519: Jan 24 09:27:06.912: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908, Peer Info Type=DIALPEER_INFO_SPEECH
094520: Jan 24 09:27:06.912: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908
094521: Jan 24 09:27:06.916: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094522: Jan 24 09:27:06.916: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094523: Jan 24 09:27:07.012: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086, Peer Info Type=DIALPEER_INFO_SPEECH
094524: Jan 24 09:27:07.012: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086
094525: Jan 24 09:27:07.016: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094526: Jan 24 09:27:07.016: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094527: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862, Peer Info Type=DIALPEER_INFO_SPEECH
094528: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862
094529: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094530: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094531: Jan 24 09:27:07.212: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908621, Peer Info Type=DIALPEER_INFO_SPEECH
094532: Jan 24 09:27:07.212: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908621
094533: Jan 24 09:27:07.216: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094534: Jan 24 09:27:07.216: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094535: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086215, Peer Info Type=DIALPEER_INFO_SPEECH
094536: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086215
094537: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094538: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094539: Jan 24 09:27:07.412: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157, Peer Info Type=DIALPEER_INFO_SPEECH
094540: Jan 24 09:27:07.412: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157
094541: Jan 24 09:27:07.416: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094542: Jan 24 09:27:07.416: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094543: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908621577, Peer Info Type=DIALPEER_INFO_SPEECH
094544: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908621577
094545: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094546: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094547: Jan 24 09:27:07.612: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086215777, Peer Info Type=DIALPEER_INFO_SPEECH
094548: Jan 24 09:27:07.612: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086215777
094549: Jan 24 09:27:07.616: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094550: Jan 24 09:27:07.616: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094551: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094552: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094553: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094554: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094555: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774T, Peer Info Type=DIALPEER_INFO_SPEECH
094556: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774T
094557: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094558: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094559: Jan 24 09:27:10.711: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=90862157774, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094560: Jan 24 09:27:10.711: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094561: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094562: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094563: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
094564: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
094565: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094566: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094567: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094568: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094569: Jan 24 09:27:10.719: fb_get_reject_cause_code: ERROR cause_code NULL
094570: Jan 24 09:27:10.727: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam " <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:10 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397230
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094571: Jan 24 09:27:11.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:11 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397231
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094572: Jan 24 09:27:12.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam " <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:12 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397232
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094573: Jan 24 09:27:14.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam" <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:14 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397234
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
I made some changes in the router configuration.
I removed FA0/0.2 Voice interface from Voice service voip configuration (bind control source-interface FastEthernet0/0.2 and bind media source-interface FastEthernet0/0.2). And now it’s using ip address 10.1.1.101 (data ip).
The debugging is changed now. I can send and receive a respond from SIP server. But It shows an error: SIP/2.0 404 Not Found
Then it moves to ISDN line, and use this line to make a call.
102988: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774T, Peer Info Type=DIALPEER_INFO_SPEECH
102989: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774T
102990: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
102991: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
102992: Jan 24 14:45:47.290: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=90862157774, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
102993: Jan 24 14:45:47.290: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
102994: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
102995: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
102996: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
102997: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
102998: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
102999: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
103000: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
103001: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
103002: Jan 24 14:45:47.298: fb_get_reject_cause_code: ERROR cause_code NULL
103003: Jan 24 14:45:47.310: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK4875CB9
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Seam" <sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 14:45:47 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 3989446920-1171263969-2466545983-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327416347
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 2438 9821 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 19412 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
103004: Jan 24 14:45:47.354: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 404 Not Found
From: "Sam "<sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>;tag=7fad61f03708-100007f-13c4-55013-a0142-10fd12c8-a0142
Call-ID: [email protected]
CSeq: 101 INVITE
Via: SIP/2.0/UDP 10.1.1.101:5060;received=88.99.77.44;branch=z9hG4bK4875CB9
Content-Length: 0
103005: Jan 24 14:45:47.362: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK4875CB9
From: "Sam " <sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>;tag=7fad61f03708-100007f-13c4-55013-a0142-10fd12c8-a0142
Date: Tue, 24 Jan 2012 14:45:47 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
103006: Jan 24 14:45:47.374: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0/1, TEI 96 changed to up
103007: Jan 24 14:45:51.313: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=, Called Number=211, Peer Info Type=DIALPEER_INFO_SPEECH
103008: Jan 24 14:45:51.313: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=211
103009: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
103010: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=20018
103011: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=, Called Number=0862157774, Peer Info Type=DIALPEER_INFO_SPEECH
103012: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=0862157774
103013: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)
103014: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
Result=NO_MATCH(-1)
103015: Jan 24 14:46:08.815: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0/1, TEI 96 changed to down
2801(config-dial-peer)#
Then I removed SIP-UA as I was told there is no registration necessary, only Dial-peer configuration.
But it didn’t affect anything.
Then I add translate-outgoing called 10 command to dial-peer 9000, nothing happened.
Really stuck and don't know where to look at.
Any help will be highly appreciated.
Thanks.Hi Dan.
Yes, I saw that RTP debugging, but what can I change there? Maybe I need to open more ports on ASA for RTP like 19412?
I use Cisco ASDM for ASA to make changes.
There are static NAT rules for: Server source IPs(10.1.1.100) to Outside(translated IPs, 88.99.77.44) for a few ports.
Also I added Security policy access rules for LAN: Any to SIP, and Outside: SIP to any.
For NAT:
I can't add this: for LAN: STATIC ROUTER IP 10.1.1.101 (AS SOURCE) UDP 5060 TO OUTSIDE IP 88.99.77.44
(AS TRANSLATED) UDP 5060
Because there is already translation for the Server.
Debugging looks like that now. There is no Received: SIP/2.0, but I can make an outside call with no audio.
116013: Jan 25 15:28:25.584: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
116014: Jan 25 15:28:25.584: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
116015: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
116016: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
116017: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
116018: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
116019: Jan 25 15:28:25.588: fb_get_reject_cause_code: ERROR cause_code NULL
116020: Jan 25 15:28:25.600: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:25 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505305
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116021: Jan 25 15:28:26.096: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:26 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505306
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116022: Jan 25 15:28:27.096: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:27 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505307
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116026: Jan 25 15:28:57.092: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam" ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:57 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389preference 1771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505337
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
I'll add Incoming dial-peer now.
Not sure what kind of NAT rule should I put into ASA to allow in and out sip traffic.
Appretiate your help.
Thanks a mill. -
How to correct bad PAB addresses that route through old GWIA
Old system was GW 7.x on NetWare 6.5 servers.
New system is GW 8.0.2HP2 on Windows 2008 servers.
We moved to new hardware, etc. when we upgraded to GW 8. It's time to turn off the old GWIA but I find that many people have saved addresses (I assume mostly in Frequent Contacts) that route messages through our old GWIA. Doing a grep search of the old GWIA logs on the term "sender" is how I know this is still how these messages are flowing.
Anyway, for example, there is a user that sends messages to his VP and that VP's address shows to be "Firstname Lastname ("[email protected]@etmc.org) in the properties of the message. With the old GWIA off messages to this address remain in Pending status. Turn the old GWIA back on and the message goes on through.
Does the GWCheck PABFix option correct these stored addresses in personal address books, or is there another way, or any way at all?
TIA
SteveI just had this problem after upgrading to 2012. An old utility (gwpabasr.exe) saved the day. You can find it in the file finder on the download site. Yes, it is OLD but it worked. Just be careful of the location of the gwpabasr.sri. It looks for it in the local windowsa directory. I know I am late to post to this request but maybe some else is looking for it.
John
Originally Posted by seschenburg
Old system was GW 7.x on NetWare 6.5 servers.
New system is GW 8.0.2HP2 on Windows 2008 servers.
We moved to new hardware, etc. when we upgraded to GW 8. It's time to turn off the old GWIA but I find that many people have saved addresses (I assume mostly in Frequent Contacts) that route messages through our old GWIA. Doing a grep search of the old GWIA logs on the term "sender" is how I know this is still how these messages are flowing.
Anyway, for example, there is a user that sends messages to his VP and that VP's address shows to be "Firstname Lastname ("[email protected]@etmc.org) in the properties of the message. With the old GWIA off messages to this address remain in Pending status. Turn the old GWIA back on and the message goes on through.
Does the GWCheck PABFix option correct these stored addresses in personal address books, or is there another way, or any way at all?
TIA
Steve -
PPC QUAD Owners -- Got Bad Fan Noise w/Logic (or just in general)?
I'm having a terrific noise problem with my Quad's (now) overactive fans. When I first got the Quad this was not a problem. Seems to have started after an update from 10.4.3 to 10.4.4 or 10.4.5. With respect to Logic, the fans go into hyperdrive (blowing relatively cool air) after I launch Logic, even when it's sitting idle with a bare-bones autoload song loaded (no plugs at all). When I quit Logic, the fans start to calm down but it takes sveral minutes to settle down completely.
Even accessing the dock or loading up this forum on Safari will cause the fans to rev, but Logic is the thing that seems to trigger this behavior the most -- and the worst.
Anyone else with a Quad is experiencing the same thing? Particularly with Logic running?
I'd be grateful if anyone can offer offer troubleshooting advice. Here's some info:
- reinstalled the system software numerous times, no change
- all Apple RAM installed (6 G)
- running 2 monitors, but with only one connected, no difference
- using wall current or UPS current makes no differenceThanks for the continued feedback/replies. Will be living with the computer/hair dryer combo for another week as the Apple store techs in my area are all booked up until after Labor Day. Gotta say, tho, that the $100 to be a ProCare member gets ya good attention from those guys.
Would still appreciate hearing about other Quad owner's experiences with their fans/noise level of their systems, just for comparison sake.
Tele, glad to hear your fans are well-behaved. Wanna trade? ;-)
Thanks again everyone. -
V210 bad fan - Identify which CPU physically is the one involved
I have a V210 server.
One of the fans for the CPU's has failed. I want to replace it (have the replacement part) but I don't know physically which CPU is the one that is effected. I have a admin guide, but it doesn't show the internals of the machine, just normal replaceable parts.
The error:
CPU_FAN @ MB.P0.F0.RS has FAILED
Indicates it is the Motherboard CPU 0 fan, but there are 2 CPU's in the box. Which one is CPU 0 and CPU 1?
How do I tell? Cant seem to find a diagram of the box internals to differentiate between the various CPU's
Output from showenvironment:
Fans (Speeds Revolution Per Minute):
Sensor Status Speed Warn Low
F0.RS OK 8544 -- 1000
F1.RS OK 8333 -- 1000
F2.RS OK 8437 -- 1000
F3.RS OK 8544 -- 1000
MB.P0.F0.RS FAILED -- 2000 2000
MB.P0.F1.RS OK 17763 2000 2000
MB.P1.F0.RS OK 16875 2000 2000
MB.P1.F1.RS OK 17307 2000 2000
Edited by: 804736 on Mar 5, 2011 10:19 AMFound a PDF which is for replacing the cpu fans... Document ID 817-4048-13.pdf
URL which most likely will change
[http://download.oracle.com/docs/cd/E19088-01/v125.srvr/817-4048-13/817-4048-13.pdf] -
Satelite A500-1HK has bad fan problem
Hello,
Please , I been trying to figure out the reason why my FAN is working at 80% of its power even tho the Core temp is so low ,, and the fan is making massive noise, well Compairing to the Laptops with same systems in it ,,, and seems that my laptop iss mkaing noise on class, I cant take it to university becaus of the sound it makes ! Fan should get a rest aswell ! .... anyway ,, I heared that TOSHIBA had that problem with Prev. Products on the Past , Just been beggin you to give me a solution, and Fast,,,
I need the Laptop to be with me on Classes ! but its noisy ! too much .... I heared it has somthing to do with the BIOS version,,, like in first 10 days I got it , it was great and smooth , but when TOSHIBA Update program asked me to update BIOS to v1.9 fan been going crazy !!!
Please HELP ! and thanxx, AND HELP FAST ! please !Hi
Did you try to change the settings in the Win 7 power management?
Do this!
There you can change the settings for CPU and cooling module performance
This will reduce the fan activity.
Please check this Toshiba doc:
http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=41
Its about Vista power management but its very similar to Win 7! -
Envy 700 graphics card has a bad fan. Looking for advice.
Graphics Card Manufacturer Powered by AMD
Graphics Chipset AMD Radeon HD 7500 Series
Device ID 675D
Vendor ID 1002
Subsystem ID 90BD
Subsystem Vendor ID 1B0A
Revision ID 00
Graphics Bus Capability PCI Express 2.0
Maximum Bus Setting PCI Express 2.0 x16
BIOS Version 013.012.000.041
BIOS Part Number 113-AD47200-102
BIOS Date 2012/06/28
Memory Size 2048 MB
Memory Type DDR3
Core Clock in MHz 650 MHz
Memory Clock in MHz 800 MHz
Total Memory Bandwidth in GByte/s 25.6 GByte/s
That information is from the card I have installed in the computer. I'm trying to figure out if it's worth replacing the heatsink and fan or it would be easier to just buy a new card? What's an equivalent card? As far as I can tell, there is no radeon hd 7500. It's not for sale anywhere.
Does anyone have a link on how to replace the heatsink on a graphics card? I'm not even sure if it can be done.You did not mention the 700's model #. Saying you own an HP 700 is like stating I own a Chevy.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus -
Overheating DP G4 1.25....BAD FAN
My trusty DP G4 1.25 just started to freeze up, video screen goes black, computer stays on, re-started and same thing happened within a few minutes.
restarted again, and quickly check tempurature using Temprature Monitor, and found a temp of 79ºC! way too high.
I started up using the Tech tool hardware test disc, but it does not check the fan.
After repeated restarts, I found the main fan is not turning on, and now I can smell burnt electronics! Yikes!
I am no longer turning on the computer, and am looking for any leads to replacing the main large fan that cools the CPU fins.
Thanks for any tips...
Dual G4 1.25 Mac OS X (10.4.6) 2 Gigs RAM, 4 internal drivesHi,
I just installed a Fan kit from VERAX. (Well it's a fan and heat sink kit).
The drop in noise is AWSOME.
It's a bit pricey, but I was about to trow my MDD thru the window.
Here is the links:
http://www.veraxfans.com/catalog.htm
http://www.veraxfans.com/shopping.htm
What you look for is the M10 G4 Kit.
Please note that this kit is compatible only with dualies.
Installation is a breeze.
In my specific case I also bought a Fan (G03 Graphics Card Cooler) for my Video card (9800 Radeon) and found out that the 2 kits were not really compatible witout some tweeking.
P.S. If you really want it quiet at max, there is also the M12 kit for replacing the PSU fans.
Hope this helped
Maybe you are looking for
-
I lost one of my "work area" markers
Hello, I somehow lost one of my work area markers. How do I get it back onto the timeline ? On this subject, I always find it awkward when I try to drag the left marker to the left side of my work area footage on the timeline, is there not an easier
-
[ANNOUNCE] Exadel's Max Katz talks about JSF and AJAX
Hello, I'm pleased to announce that JSF Central has just published an interview with Exadel senior systems engineer Max Katz. In the interview, Max talks about the key value and benefits of JSF, how it compares to other frameworks, why it is such a g
-
PLEASE HELP!!! ESB TDM bridge error opening songs in Logic that uses ESB
Please HELP ME!! I'm using logic from 12 years but now afterupdating to L8 i'm getting an error that crash the application after opening the arrange, this is not happening if a open a blank song, like my autoload template.... one strange thing is tha
-
Recently upgraded my hard drive from 1TB to 2TB and Lightroom 5 can't find the catalog. Before the upgrade, no problem. After the upgrade and a secondary fix to make Windows 7 happy, Lightroom can't find the appropriate catalog file, and any folders
-
I can't find my document from pages... VERY IMPORTANT!!!
Ok, so I was working on my FINAL LAB that's due TOMORROW and I have been saving the lab multiple times, but when i went to look for the document on my computer, nothing... I literally saved it at least 4 times, and there's nothing to be found!!! I ne