Bad_Image gdiplus.dll after kb2834886

I have a Windows 7 - 64 bit notebook with an easily reproducible error on KB2834886. Before it is installed, it has all other patches and driver updates applied. In this state, it will go through a sfc /scannow without error. It
will also do a Update Readiness Tool with no error. Applying the update will produce an error on boot on a plain black screen, in any mode, normal, safe mode, safe mode w/net, safe mode w/command line that states that logonUI.exe is reporting a
bad image of a winsxs copy of gdiplus.dll. It will not continue to a logon screen. If you attempt to CTRL-ALT-DEL or other keyboard commands, it will repeat the error, but not continue to logon screen. System Restore from Windows RE will get
user back to logon. Malware scans produce nothing, did manual repair of bcd, no change. I hid the update, so the user would not accidentally post, but that does not seem like a solution.

Hi,
Can you perform SFC command during Windows Recovery environment? Since I notice you see a report about the gdiplus.dll file.
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Similar Messages

Gdiplus.dll not found when installing itunes 10

Hi, went to open iTunes today after a few weeks of not using it, received the following msg: 'iTunes exe: unable to locate component, this application has failed to start because gdiplus.dll was not found. Reinstalling may fix this problem' so I downloaded itunes 10, restarted etc, got this error again followed by 'iTunes was not installed correctly, please reinstall iTunes. Error 7 (Windows error 126)'. I've uninstalled & downloaded iTunes again but no joy, can anyone help please?

Curses.
One trouble with Gdiplus.dll troubleshooting is that there are so many of the little beggars on a PC. I've got 18, for example. The capitalisation of the copy you're having trouble with indicates the copy in question might be down in your Side-by-side configuration, but there's a lot of different ones down there too.
Okay ... if it's one of the Side-by-Side copies that is giving us grief, then plausibly a repair install of your .net framework may be of some assistance as per:
[iTunes for Windows: "iTunes was not installed properly. Please reinstall iTunes" message|http://support.apple.com/kb/TS3074]
... any luck with that, supple?

Jabber 9.7 gdiplus.dll is missing

Hello,
We are running jabber 9.7 for windows and we have a small problem that is difficult to reproduce consistently. Some of our users, when they start up their computers, sometimes they receive a message "GDIPLUS.dll is missing" and the Jabber application fails to start. This does not happen every time they boot their computer, but it is annoying.
If they try afterwards to start Jabber manually, the application starts correctly. I'm thinking that the issue is related to the timing of application/system startup but not sure.
The PCs are running windows 7
Nothing is written in the Jabber log file, probably the error occurs too early
Any clues?
Thanks,
John

The @ character isn't allowed for the jid node identifier.
You may also have a look here:
http://xmpp.org/extensions/xep-0029.html

I need help w/ This: missing gina dll after installation...

I need help w/ This: missing gina dll after installation of linksys adaptor on Win XP.
Thank you

I assume you are facing this error on wireless USB adapter ... WUSB54GC .... uninstall the adapter from all programs >> unplug & replug the adapter >> Install the drivers using found new hardware >>
Once installed use windows wireless configuration to connect to the wireless network .....
See if it works .....

Crystal Decisions 2.0 Gdiplus.dll file update

In reference to Microsoft IAVA 2004-A-0015 JPEG Processing GDI+ Buffer Overlow. I am a network security engineer that is responsible for IAVA compliance over large enterprises. My team is having fits with a gdiplus.dll that points to the following path for 200 machines on our network:
C:\Program Files\Common Files\Crystal Decisions\2.0\Bin\gdiplus.dll
My question is, does anyone know if SAP released an update file that doesn't depict as being vulnerable based on the latest Microsoft bulletin that was re-released in concerns to updates in GDI vulnerabilties?
Another concern we had, was renaming this .dll file, is it always registered or just present within the Crystal Decisions path, to where it could cause problems with the software on the asset?
V/R,
Jay

It being a Microsoft DLL, I am not sure why SAP / Business Objects would be releasing an updated file? I'd suggest contacting Microsoft and ask them for details on this dll.
From the directory path, it looks like this pertains to CR 9 (out of support since April of 07). See this for more info:
Business Objects Product Lifecycles [original link is broken]
Now, there are updates available for CR 9, but I don't think I have enough info here to determine if this will help.
Ludek

Issues related to legacy gdiplus.dll file(s)

Microsoft,
I am using an OVAL based vulnerability scanner which checks certain files on my windows 2003 server.
It's detecting vulnerabilities related to legacy gdiplus.dll files stored in the c:\windows\winsxs folder
I have had already applied the windows updates which mitigates those vulnerabilities.
For example, I have already applied the patch for MS11-029, Security Update for Windows Server 2003 (KB2412687). However, this vulnerability keeps being detected.
I went to the c:\windows\winsxs folder, and saw that the older version of the gdiplus.dll file still exists.
I have tried Disk Cleanup, and clean up of window components, but the older file persist.
From other microsoft postings, it is not recommended that I go into the winsxs folder and start deleting files.
Please advise next course of action.

I checked my c:\windows\system32 folder, and according to the file search, there weren't any files named "gdiplus.dll"- this search was completed using the options:
- search system folders
- search hidden files and folders
- search subfolders
Windows file search only found the gdiplus.dll files under c:\windows\winsxs
Using the windows 2003 support tools, I used this command to obtain the requested info:
filever c:\windows\winsxs\gdiplus.dll /s /a /d
Results are as follows:
c:\windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.0.0_x-ww_8d353f13\gdiplus.dll
W32i DLL ENU 5.1.3097.0 shp gdiplus.dll
c:\windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.100.0_x-ww_0d1f9f94\gdiplus.dll
W32i DLL ENU 5.2.3790.0 shp gdiplus.dll
c:\windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.3790.1830_x-ww_24c40c58\gdiplus.dll
W32i DLL ENU 5.2.3790.1830 shp gdiplus.dll
c:\windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.3790.3959_x-ww_8251bdde\gdiplus.dll
W32i DLL ENU 5.2.3790.3959 shp gdiplus.dll
c:\windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.3790.4278_x-ww_ad682293\gdiplus.dll
W32i DLL ENU 5.2.3790.4278 shp gdiplus.dll
c:\windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6001.22319_x-ww_f0b4c2df\gdiplus.dll
W32i DLL ENU 5.2.6001.22319 shp gdiplus.dll
c:\windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6002.22507_x-ww_c7dad021\gdiplus.dll
W32i DLL ENU 5.2.6002.22507 shp gdiplus.dll
c:\windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6002.22791_x-ww_c8dff154\gdiplus.dll
W32i DLL ENU 5.2.6002.22791 shp gdiplus.dll
c:\windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6002.23084_x-ww_f3f35550\gdiplus.dll
W32i DLL ENU 5.2.6002.23084 shp gdiplus.dll

TestStand don't unload handle in a DLL after step is executed and unloaded

Hi,
Sorry for the 'Google' English. I hope you can understand my problem.
I developed a DLL (in C, under Visual C++.NET 2003) to program board by Ethernet. Then I developed VIs (LV 7.1) for this DLL. It's work very well.
I adapted these VIs for TestStand 2.0.1 (Test Data indicator and Input buffer command - with the good connector). I had sometime error -18002 (Server close VI) then I configured steps so that TS load them dynamically and unload after the steps execution.
With this step configuration, I can unloaded an Access file opened in a VI.
In the DLL, I open another ASCII file then I close it before go back under LabVIEW. When I launch the VIs without using TestStand ('Edit code' and run under LV), I can launch the programming several times. But if I use 'Run selected step', I can launch only one programming: the file can't be open any more (handle already used). If I do 'run selected step' several times (4 to 5 times), I have an error -18002 and I must close LabVIEW and TestStand for all to free. I tested on another PC which works very well but there too I have the same problem.
How do I have to configure TestStand to be sure that it releases the resource? Thank you in advance for your help.
My NI login didn't work since many months (thanks Laura F. of ni.com to solve this problem) so I posted this message on NI France (SR 7158216). Today, they did not find a solution yet. The support tested the call of a DLL (opening/closing of a file) CVI directly under TestStand without problem. They must test the call of the DLL in one VI, called under TestStand. If somebody encountered already this problem and found a solution, that interests me because my customer want now to have his program speedly. Thanks a lot.
Regards.
PS:
If that can help somebody: LabVIEW does not like 'BOOL' and 'u_char' types in a DLL: the DLL works without error but the result is bad. It is to better use 'int' (instead of 'BOOL') and 'unsigned char' (instead of 'u_char') even of they are used in an internal function with the DLL. I must search a long time before understand this problem.

Thanks for your answer
.NIDays2008 {font-family:Arial, Helvetica, sans-serif; font-size:12px; color: #065fa3; font-weight: bold; text-decoration: none; text-align: right;} .NIDays2008 a, a:hover {text-decoration: none;} .NIDays2008 a img {height: 0; width: 0; border-width: 0;} .NIDays2008 a:hover img {position: absolute; height: 90px; width: 728px; margin-left: -728px; margin-top:-12px;}
>> Avez-vous entendu parler de NI Days ?

APPCRASH in Acrobat.dll after adding annots with AFExecuteThisScript()

I have a C# app that displays PDFs in a WebBrowser control.   I also have a plug-in that loads annotations into the PDF (i.e. doc.addAnnot(<propertys>)) via calls to AFExecuteThisScript(). It works; the annots are loaded successfully. However, whenever I do this, I get an APPCRASH after the app has terminated. Since it happens after the app exits, it's out of the debugger's scope.
Since this problem happens only after my plug-in adds annots to the PDF, I'm thinking that something Javascript-related is not being released before the app exits. I've tried doc.dirty = false after adding each annot, and also docClose() in my plug-in's AVDocWillClose callback, but it doesn't do any good.
This is NOT caused by AFExecuteThisScript() per se. In other words, I can do AFExecuteThisScript with or without a return value and there's no APPCRASH. It only seems to happen when I modify the PDF (i.e. add annots) via AFExecuteThisScript().
This is not a showstopper for me but merely an irritant, because it always happens when the application terminates. Incidentally, it did not seem to happen in Acrobat 8.
Here is the problem signature that is produced in VS 2005 after the app terminates.
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    DrsDisposition.vshost.exe
Application Version:    8.0.50727.42
Application Timestamp:    4333d898
Fault Module Name:    Acrobat.dll
Fault Module Version:    9.3.0.148
Fault Module Timestamp:    4b3074b9
Exception Code:    c0000005
Exception Offset:    0013286c
OS Version:    6.1.7600.2.0.0.256.48
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
Can anyone help?
Thanks.

I modified my plug-in to enable it when I open a PDF from the file system with Acrobat.exe, and then create a single annot with AFExecuteThisScript().
Everything works fine, the annot is created, and there is no APPCRASH when I quit Acrobat.
I just needed to modify my AVDocDidOpen and AVIdle callbacks to make this work (to allow me to work with PDFs opened in Acrobat.exe from the file system), so everything else about the plug-in (initialization through cleanup) is the same.
One of the last lines of output was:
     'Acrobat.exe': Unloaded 'C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.dll'
It seems to me that the problem is related to the WebBrowser control, which apparently does not release Acrobat.dll when it destructs. I've tried manually releasing Acrobat.dll in my app code after Application.Run(theForm); returns, i.e.
     IntPtr handle = GetModuleHandle("Acrobat.dll");
     if (!handle.ToString().Equals("0"))
          FreeLibrary(handle);
but that causes the app to crash on FreeLibrary().
I wonder if it would make any difference if I were to manually load Acrobat.dll in my code, rather than waiting for the WebBrowser control to do it when it opens the PDF. I noticed that one of the first output lines from Acrobat.exe (after the windows libraries are loaded) is
ADOBE_READLOGGER_CMD:COMMENT:BeforeOROADOBE_READLOGGER_CMD:COMMENT:AfterORO'Acrobat.exe': Loaded 'C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.dll', No symbols loaded.
Incidentally, I'm unable to debug my plugin when I run my app in VS 2005. There's no process that I can attach my plug-in debugger to, probably because Acrobat 9 uses in-process DLLs to render PDFs in browsers.

Adobe Reader crash on MSO.dll after MS April updates

Hi!
After installing the latest Office 2013 patches in April, Adobe Reader crashes when using the mail function.
I have Adobe Reader 11.0.10 installed and Office 2013 Sp1 32-Bit. This is a RDS server.
Error:
Faulting application name: AcroRd32.exe, version: 11.0.10.32, time stamp: 0x547e9779
Faulting module name: mso.dll, version: 15.0.4711.1000, time stamp: 0x550916e4
Exception code: 0xc0000005
Fault offset: 0x0144ce27
Faulting process id: 0x5330
Faulting application start time: 0x01d07cd625f42b2a
Faulting application path: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
Faulting module path: C:\Program Files (x86)\Common Files\Microsoft Shared\Office15\mso.dll
Report Id: 68118363-e8c9-11e4-9a57-00505683650c
Anyone else got this error?
/Daniel

PDN
Happy to look at the dmps if you can get to them.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
Wanikiya and Dyami--Team Zigzag

Can't load php_oci8.dll after xampp update

Hello,
I tried to update Xampp with apache 2.0.52 and PHP 5.0.2 and oci8 rev 1.257 to apache 2.2.2 and PHP 5.1.4 .
I uncommentet the line extension=php_oci8.dll and the extension directory is correctly set by xampp.
And the first environment Path of the System is still linked to ...\oracle\ora92\bin .
Starting the Apache server I get the error message: "The procedure entry point OCILobRead2 could not be located in the dynamic link library OCI.dll"
With the old version the only thing I had to do was uncommenting the extension line, but with the new version it simply doesn't want to work.
After renaming my backup folder with the old server everything is working again. But not the new version.
Thanks for any help!
Message was edited by:
user525100

Let's continue here, shall we?
PHP Oracle connection randomly slow

Get error message "GetLogicalProcessorInformation .... kernel32.dll" after applying firefox 36.0 update

i was using firefox 35.0.1 and just applied the 36.0 update few hours ago.
after that, i was unable to run firefox.
when i double clicks on the firefox icon, it bumps out 2 error message.
1 of them is "GetLogicalProcessorInformation ... kernel32.dll"
and the other is "unknown exceptional error (0xc06d007e) at 0x7c812a5b"
those are keywords from the message since i am using traditional ver. firefox, not sure if i translate correctly.
wonder if i can just return to 35.0.1 and wait until another update fix this problem

''jayelbe [[#answer-696612|said]]''
<blockquote>
Hi tenfive,
It sounds like something must have gone wrong during the update.
Could you please try downloading the latest Firefox installer from this page, and use it to reinstall Firefox?
https://www.mozilla.org/en-US/firefox/all/
Let us know if this solves the issue! If not, It is possible to download and install Firefox 35 - but there were some security issues fixed in Firefox 36, so it's always better to use the latest version.
</blockquote>
i have tried that several times but things keep the same
i am now using firefox 35, thanks for your help :)

Loss of MSVCR80.dll after iTunes update

After latest iTunes update loss MSVCR80.dll file
Cannot install iTunes even after uninstalling it

Hello MSLaurier,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario

Corrupt dll after update

Hello,
I just tried to install an Adobe update (honestly didn't pay attention to which one). I was prompted to restart and after I did, nothing happened. I tried to open several adobe products (I own the CS3 suite) and Acrobat, which of course I need right now, won't open due to a 'corrupt dll'. Photoshop, Illustrator etc open just fine.
I tried to manually download the latest update and somehow I don't have permission to run it....
i am running vista home premium - and have updated Adobe products many times....
is there any way to get the Adobe updater to run again or to fix this?
I appreciate anyone's help!
Leslie

Aandi,
First of all, thank you for taking the time to help me.
I am extremely frustrated and I regret that I did not either thoroughly read the message, or put it into my original post.
When trying to manually run the update I receive:
"Error 1321. The installer has insufficient privileges to modify the file C:\Program Files\Adobe\Acrobat 8.0\Acrobat\Javascripts\JSByteCodeWin.bin"
I have tried to run this with the Vista UAC on and off (as suggested in other posts)
I did manage to run the Adobe Updater through Photoshop, but it did not catch this update and reinstall it.

Msvcr80.dll after trying to update itunes how do i fix?

After trying to update itunes I keep getting the message 'msvcr80.dll is missiing'.
What do I need to do to fix this?

Click here and follow the instructions.
(98896)

Missing DLL after Lenovo System Update

I upgraded to Windows 10 on my ThinkPad Twist. After that, I ran Lenovo's System Update and downloaded and installed all the recommended updates. Now when I reboot I get a message saying that C:\Program Files (X86)\Thinkpad\Utilities\PWMTR64V.dll is missing. Searching the Lenovo support site for this DLL file name shows that it is related to Windows 7 Power Management. However, one of the updates from Lenovo was Power Management for Windows 10. I am hesitant to install the Power Management update for Windows 7 (which I'm guessing will solve my missing DLL problem, but maybe not) after installing such an update specific to Windows 10. But I don't want to have to have that popup message about a missing DLL every time I boot. Anyone know how I can resolved this?

Hello,
theo, thank your for providing your solution. Please click solved to your thread.
Yes some updates can cause problem, especially R&R or CSS.
It´s important not to download everything and carefully read the read me´s of every update,
to avoid problems like this.
Regards
Andreas
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Bad_Image gdiplus.dll after kb2834886

Similar Messages

Maybe you are looking for